* Re: [PATCH] Add support for Tilera TILE-Gx processor (part 1/2: gdb)
2012-04-20 12:54 ` Joel Brobecker
2012-04-20 14:03 ` Jeff Kenton
@ 2012-04-23 19:59 ` Jeff Kenton
2012-04-24 16:07 ` Pedro Alves
` (15 more replies)
2012-04-23 20:12 ` [PATCH] Add support for Tilera TILE-Gx processor (part 2/2: gdbserver) Jeff Kenton
2 siblings, 16 replies; 33+ messages in thread
From: Jeff Kenton @ 2012-04-23 19:59 UTC (permalink / raw)
To: Joel Brobecker; +Cc: gdb-patches
[-- Attachment #1: Type: text/plain, Size: 535 bytes --]
On 04/20/2012 08:43 AM, Joel Brobecker wrote:
> Hello Jeff,
>
> I agree on all of Yao's points. In addition, I would split your
> patches differently: I'd have one patch that adds support to GDB,
> and then another that adds support to GDBserver. I don't think
> it makes sense to have one patch with configury/Makefile changes
> on the one hand, because those changes do not make sense without
> the associated sources.
>
> If you need to be started on the copyright assignment, please
> let me know, and I will send you the form.
>
[-- Attachment #2: patch_1 --]
[-- Type: text/plain, Size: 53732 bytes --]
[PATCH] Add support for Tilera TILE-Gx processor (part 1/2: gdb)
I have re-organized my two part patch (submitted 4/19) in line
with suggestions from Joel and Yao. It is now separated into a GDB
port (this part) and a GDBserver port (to follow).
This is a port of GDB to the Tilera TILE-Gx processor.
Comments please.
Thanks.
jeff kenton (jkenton@tilera.com)
* New target
Tilera TILE-Gx tilegx-*-*
gdb/
* config/tilegx/nm-linux.h: new file
* config/tilegx/tilegx.mh: new file
* config/tilegx/tm-linux.h: new file
* configure.host: add target tilegx*
* configure.tgt: add target tilegx-*-*
* Makefile.in: add tilegx-tdep.o
* regformats/reg-tilegx.dat: new file
* tilegx-linux-nat.c: new file
* tilegx-tdep.c: new file
diff -r -u -N /home/packages/gdb-7.4x/gdb/config/tilegx/nm-linux.h ./gdb/config/tilegx/nm-linux.h
--- /home/packages/gdb-7.4x/gdb/config/tilegx/nm-linux.h 1969-12-31 19:00:00.000000000 -0500
+++ ./gdb/config/tilegx/nm-linux.h 2012-04-23 13:01:20.177924000 -0400
@@ -0,0 +1,45 @@
+/* Native-dependent definitions for GNU/Linux on TILE.
+
+ Copyright (C) 2012 Free Software Foundation, Inc.
+
+ This file is part of GDB.
+
+ This program is free software; you can redistribute it and/or modify
+ it under the terms of the GNU General Public License as published by
+ the Free Software Foundation; either version 3 of the License, or
+ (at your option) any later version.
+
+ This program is distributed in the hope that it will be useful,
+ but WITHOUT ANY WARRANTY; without even the implied warranty of
+ MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ GNU General Public License for more details.
+
+ You should have received a copy of the GNU General Public License
+ along with this program. If not, see <http://www.gnu.org/licenses/>. */
+
+#ifndef NM_TILELINUX_H
+#define NM_TILELINUX_H
+
+#undef HAVE_LINK_H
+
+#include "config/nm-linux.h"
+
+/* Return sizeof user struct to callers in less machine dependent
+ routines. Hard coded for cross-compilation friendliness. */
+
+#define KERNEL_U_SIZE 308
+
+/* This is the amount to substract from u.u_ar0 to get the offset in
+ the core file of the register values. */
+#define KERNEL_U_ADDR 0
+
+/* ptrace register ``addresses'' are absolute. */
+
+#define U_REGS_OFFSET 0
+
+/* ptrace transfers longs, and expects addresses as longs. */
+
+#define PTRACE_ARG3_TYPE long
+#define PTRACE_XFER_TYPE long
+
+#endif /* NM_TILELINUX_H */
diff -r -u -N /home/packages/gdb-7.4x/gdb/config/tilegx/tilegx.mh ./gdb/config/tilegx/tilegx.mh
--- /home/packages/gdb-7.4x/gdb/config/tilegx/tilegx.mh 1969-12-31 19:00:00.000000000 -0500
+++ ./gdb/config/tilegx/tilegx.mh 2012-04-23 13:01:20.199904000 -0400
@@ -0,0 +1,12 @@
+# Host: Tilera tilegx running GNU/Linux.
+
+NAT_FILE= nm-linux.h
+NATDEPFILES= inf-ptrace.o fork-child.o \
+ tilegx-linux-nat.o \
+ proc-service.o linux-thread-db.o \
+ linux-nat.o linux-osdata.o linux-fork.o \
+ linux-procfs.o linux-ptrace.o
+
+# The dynamically loaded libthread_db needs access to symbols in the
+# gdb executable.
+LOADLIBES = -ldl -rdynamic
diff -r -u -N /home/packages/gdb-7.4x/gdb/config/tilegx/tm-linux.h ./gdb/config/tilegx/tm-linux.h
--- /home/packages/gdb-7.4x/gdb/config/tilegx/tm-linux.h 1969-12-31 19:00:00.000000000 -0500
+++ ./gdb/config/tilegx/tm-linux.h 2012-04-23 13:01:20.342909000 -0400
@@ -0,0 +1,29 @@
+/* Target-dependent definitions for GNU/Linux TILE.
+
+ Copyright (C) 2012 Free Software Foundation, Inc.
+
+ This file is part of GDB.
+
+ This program is free software; you can redistribute it and/or modify
+ it under the terms of the GNU General Public License as published by
+ the Free Software Foundation; either version 3 of the License, or
+ (at your option) any later version.
+
+ This program is distributed in the hope that it will be useful,
+ but WITHOUT ANY WARRANTY; without even the implied warranty of
+ MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ GNU General Public License for more details.
+
+ You should have received a copy of the GNU General Public License
+ along with this program. If not, see <http://www.gnu.org/licenses/>. */
+
+#ifndef TM_TILELINUX_H
+#define TM_TILELINUX_H
+
+/* Pull in GNU/Linux generic defs. */
+#include "config/tm-linux.h"
+
+/* Integer capable of holding an instruction bundle. */
+typedef unsigned long long t_bundle;
+
+#endif /* TM_TILELINUX_H */
diff -r -u -N /home/packages/gdb-7.4x/gdb/configure.host ./gdb/configure.host
--- /home/packages/gdb-7.4x/gdb/configure.host 2011-05-04 15:28:14.000000000 -0400
+++ ./gdb/configure.host 2012-04-23 13:01:20.363913000 -0400
@@ -50,6 +50,7 @@
sparcv9 | sparc64) gdb_host_cpu=sparc ;;
s390*) gdb_host_cpu=s390 ;;
sh*) gdb_host_cpu=sh ;;
+tilegx*) gdb_host_cpu=tilegx ;;
x86_64*) gdb_host_cpu=i386 ;;
m32r*) gdb_host_cpu=m32r ;;
xtensa*) gdb_host_cpu=xtensa ;;
@@ -159,6 +160,8 @@
gdb_host=sol2
;;
+tilegx-*-*) gdb_host=tilegx ;;
+
vax-*-bsd*) gdb_host=vax ;;
vax-*-netbsdelf* | vax-*-knetbsd*-gnu)
gdb_host=nbsdelf ;;
diff -r -u -N /home/packages/gdb-7.4x/gdb/configure.tgt ./gdb/configure.tgt
--- /home/packages/gdb-7.4x/gdb/configure.tgt 2012-03-05 06:41:51.000000000 -0500
+++ ./gdb/configure.tgt 2012-04-23 13:01:20.385903000 -0400
@@ -551,6 +551,13 @@
gdb_target_obs="tic6x-tdep.o"
;;
+tilegx-*-*)
+ # Target: TILE-Gx
+ gdb_target_obs="tilegx-tdep.o solib.o solib-svr4.o \
+ symfile-mem.o linux-tdep.o"
+ build_gdbserver=yes
+ ;;
+
xstormy16-*-*)
# Target: Sanyo Xstormy16a processor
gdb_target_obs="xstormy16-tdep.o"
diff -r -u -N /home/packages/gdb-7.4x/gdb/Makefile.in ./gdb/Makefile.in
--- /home/packages/gdb-7.4x/gdb/Makefile.in 2012-03-28 17:31:18.000000000 -0400
+++ ./gdb/Makefile.in 2012-04-23 13:01:20.157899000 -0400
@@ -565,6 +565,7 @@
sparc-sol2-tdep.o sparc-tdep.o \
spu-tdep.o spu-multiarch.o solib-spu.o \
tic6x-tdep.o tic6x-linux-tdep.o \
+ tilegx-tdep.o \
v850-tdep.o \
vaxnbsd-tdep.o vaxobsd-tdep.o vax-tdep.o \
xstormy16-tdep.o \
@@ -723,7 +724,7 @@
regcache.c reggroups.c remote.c remote-fileio.c reverse.c \
sentinel-frame.c \
serial.c ser-base.c ser-unix.c skip.c \
- solib.c solib-target.c source.c \
+ solib-target.c source.c \
stabsread.c stack.c std-regs.c symfile.c symfile-mem.c symmisc.c \
symtab.c \
target.c target-descriptions.c target-memory.c \
@@ -905,7 +906,7 @@
reggroups.o regset.o \
trad-frame.o \
tramp-frame.o \
- solib.o solib-target.o \
+ solib-target.o \
prologue-value.o memory-map.o memrange.o \
xml-support.o xml-syscall.o xml-utils.o \
target-descriptions.o target-memory.o xml-tdesc.o xml-builtin.o \
@@ -1510,6 +1511,7 @@
sparc64nbsd-nat.c sparc64nbsd-tdep.c sparc64obsd-tdep.c \
sparcnbsd-nat.c sparcnbsd-tdep.c sparcobsd-tdep.c \
spu-linux-nat.c spu-tdep.c spu-multiarch.c solib-spu.c \
+ tilegx-linux-nat.c tilegx-tdep.c \
v850-tdep.c \
vax-nat.c vax-tdep.c vaxbsd-nat.c vaxnbsd-tdep.c \
windows-nat.c windows-tdep.c \
diff -r -u -N /home/packages/gdb-7.4x/gdb/regformats/reg-tilegx.dat ./gdb/regformats/reg-tilegx.dat
--- /home/packages/gdb-7.4x/gdb/regformats/reg-tilegx.dat 1969-12-31 19:00:00.000000000 -0500
+++ ./gdb/regformats/reg-tilegx.dat 2012-04-23 13:01:20.481904000 -0400
@@ -0,0 +1,67 @@
+name:tile
+expedite:sp,lr,pc
+64:r0
+64:r1
+64:r2
+64:r3
+64:r4
+64:r5
+64:r6
+64:r7
+64:r8
+64:r9
+64:r10
+64:r11
+64:r12
+64:r13
+64:r14
+64:r15
+64:r16
+64:r17
+64:r18
+64:r19
+64:r20
+64:r21
+64:r22
+64:r23
+64:r24
+64:r25
+64:r26
+64:r27
+64:r28
+64:r29
+64:r30
+64:r31
+64:r32
+64:r33
+64:r34
+64:r35
+64:r36
+64:r37
+64:r38
+64:r39
+64:r40
+64:r41
+64:r42
+64:r43
+64:r44
+64:r45
+64:r46
+64:r47
+64:r48
+64:r49
+64:r50
+64:r51
+64:r52
+64:tp
+64:sp
+64:lr
+64:sn
+64:io0
+64:io1
+64:us0
+64:us1
+64:us2
+64:us3
+64:zero
+64:pc
diff -r -u -N /home/packages/gdb-7.4x/gdb/tilegx-linux-nat.c ./gdb/tilegx-linux-nat.c
--- /home/packages/gdb-7.4x/gdb/tilegx-linux-nat.c 1969-12-31 19:00:00.000000000 -0500
+++ ./gdb/tilegx-linux-nat.c 2012-04-23 13:01:20.494907000 -0400
@@ -0,0 +1,188 @@
+/* Native-dependent code for GNU/Linux Tile
+
+ Copyright (C) 2012 Free Software Foundation, Inc.
+
+ This file is part of GDB.
+
+ This program is free software; you can redistribute it and/or modify
+ it under the terms of the GNU General Public License as published by
+ the Free Software Foundation; either version 3 of the License, or
+ (at your option) any later version.
+
+ This program is distributed in the hope that it will be useful,
+ but WITHOUT ANY WARRANTY; without even the implied warranty of
+ MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ GNU General Public License for more details.
+
+ You should have received a copy of the GNU General Public License
+ along with this program. If not, see <http://www.gnu.org/licenses/>. */
+
+#include "defs.h"
+#include "inferior.h"
+#include "gdbcore.h"
+#include "regcache.h"
+#include "linux-nat.h"
+
+#include <sys/ptrace.h>
+
+#include "gdb_assert.h"
+#include "gdb_string.h"
+#include "nm-linux.h"
+
+#include <sys/procfs.h>
+
+/* Prototypes for supply_gregset etc. */
+#include "gregset.h"
+
+/* Defines ps_err_e, struct ps_prochandle. */
+#include "gdb_proc_service.h"
+
+
+/* The register sets used in GNU/Linux ELF core-dumps are identical to
+ the register sets in `struct user' that is used for a.out
+ core-dumps, and is also used by `ptrace'. The corresponding types
+ are `elf_gregset_t' for the general-purpose registers (with
+ `elf_greg_t' the type of a single GP register) and `elf_fpregset_t'
+ for the floating-point registers.
+
+ Those types used to be available under the names `gregset_t' and
+ `fpregset_t' too, and this file used those names in the past. But
+ those names are now used for the register sets used in the
+ `mcontext_t' type, and have a different size and layout. */
+
+/* Mapping between the general-purpose registers in `struct user'
+ format and GDB's register array layout. Note that we map the
+ first 56 registers (0 thru 55) one-to-one. GDB maps the pc to
+ slot 64, but ptrace returns it in slot 56. */
+static const int regmap[] =
+{
+ 0, 1, 2, 3, 4, 5, 6, 7,
+ 8, 9, 10, 11, 12, 13, 14, 15,
+ 16, 17, 18, 19, 20, 21, 22, 23,
+ 24, 25, 26, 27, 28, 29, 30, 31,
+ 32, 33, 34, 35, 36, 37, 38, 39,
+ 40, 41, 42, 43, 44, 45, 46, 47,
+ 48, 49, 50, 51, 52, 53, 54, 55,
+ -1, -1, -1, -1, -1, -1, -1, -1,
+ 56
+};
+
+
+/* Transfering the general-purpose registers between GDB, inferiors
+ and core files. */
+
+/* Fill GDB's register array with the general-purpose register values
+ in *GREGSETP. */
+
+void
+supply_gregset (struct regcache* regcache,
+ const elf_gregset_t *gregsetp)
+{
+ elf_greg_t *regp = (elf_greg_t *) gregsetp;
+ int i;
+
+ for (i = 0; i < sizeof(regmap)/sizeof(regmap[0]); i++)
+ if (regmap[i] >= 0)
+ regcache_raw_supply (regcache, i, regp + regmap[i]);
+}
+
+/* Fill registers in *GREGSETPS with the values in GDB's
+ register array. */
+
+void
+fill_gregset (const struct regcache* regcache,
+ elf_gregset_t *gregsetp, int regno)
+{
+ elf_greg_t *regp = (elf_greg_t *) gregsetp;
+ int i;
+
+ for (i = 0; i < sizeof(regmap)/sizeof(regmap[0]); i++)
+ if (regmap[i] >= 0)
+ regcache_raw_collect (regcache, i, regp + regmap[i]);
+}
+
+/* Transfering floating-point registers between GDB, inferiors and cores. */
+
+/* Fill GDB's register array with the floating-point register values in
+ *FPREGSETP. */
+
+void
+supply_fpregset (struct regcache *regcache,
+ const elf_fpregset_t *fpregsetp)
+{
+ /* NOTE: There are no floating-point registers for TILE-Gx. */
+}
+
+/* Fill register REGNO (if it is a floating-point register) in
+ *FPREGSETP with the value in GDB's register array. If REGNO is -1,
+ do this for all registers. */
+
+void
+fill_fpregset (const struct regcache *regcache,
+ elf_fpregset_t *fpregsetp, int regno)
+{
+ /* NOTE: There are no floating-point registers for TILE-Gx. */
+}
+
+
+/* Fetch register REGNUM from the inferior. If REGNUM is -1, do this
+ for all registers. */
+
+static void
+fetch_inferior_registers (struct target_ops *ops,
+ struct regcache *regcache, int regnum)
+{
+ elf_gregset_t regs;
+ int tid;
+
+ tid = ptid_get_lwp (inferior_ptid);
+ if (tid == 0)
+ tid = ptid_get_pid (inferior_ptid);
+
+ if (ptrace (PTRACE_GETREGS, tid, 0, (PTRACE_TYPE_ARG3) ®s) < 0)
+ perror_with_name (_("Couldn't get registers"));
+
+ supply_gregset (regcache, (const elf_gregset_t *)®s);
+}
+
+/* Store register REGNUM back into the inferior. If REGNUM is -1, do
+ this for all registers. */
+
+static void
+store_inferior_registers (struct target_ops *ops,
+ struct regcache *regcache, int regnum)
+{
+ elf_gregset_t regs;
+ int tid;
+
+ tid = ptid_get_lwp (inferior_ptid);
+ if (tid == 0)
+ tid = ptid_get_pid (inferior_ptid);
+
+ if (ptrace (PTRACE_GETREGS, tid, 0, (PTRACE_TYPE_ARG3) ®s) < 0)
+ perror_with_name (_("Couldn't get registers"));
+
+ fill_gregset (regcache, ®s, regnum);
+
+ if (ptrace (PTRACE_SETREGS, tid, 0, (PTRACE_TYPE_ARG3) ®s) < 0)
+ perror_with_name (_("Couldn't write registers"));
+}
+
+
+extern initialize_file_ftype _initialize_tile_linux_nat;
+
+void
+_initialize_tile_linux_nat (void)
+{
+ struct target_ops *t;
+
+ /* Fill in the generic GNU/Linux methods. */
+ t = linux_target ();
+
+ /* Add our register access methods. */
+ t->to_fetch_registers = fetch_inferior_registers;
+ t->to_store_registers = store_inferior_registers;
+
+ /* Register the target. */
+ linux_nat_add_target (t);
+}
diff -r -u -N /home/packages/gdb-7.4x/gdb/tilegx-tdep.c ./gdb/tilegx-tdep.c
--- /home/packages/gdb-7.4x/gdb/tilegx-tdep.c 1969-12-31 19:00:00.000000000 -0500
+++ ./gdb/tilegx-tdep.c 2012-04-23 14:55:38.339505000 -0400
@@ -0,0 +1,1154 @@
+/* Target-dependent code for the Tilera TILE-Gx processor.
+
+ Copyright (C) 2012 Free Software Foundation, Inc.
+
+ This file is part of GDB.
+
+ This program is free software; you can redistribute it and/or modify
+ it under the terms of the GNU General Public License as published by
+ the Free Software Foundation; either version 3 of the License, or
+ (at your option) any later version.
+
+ This program is distributed in the hope that it will be useful,
+ but WITHOUT ANY WARRANTY; without even the implied warranty of
+ MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ GNU General Public License for more details.
+
+ You should have received a copy of the GNU General Public License
+ along with this program. If not, see <http://www.gnu.org/licenses/>. */
+
+#include "defs.h"
+#include "frame.h"
+#include "frame-base.h"
+#include "frame-unwind.h"
+#include "dwarf2-frame.h"
+#include "trad-frame.h"
+#include "symtab.h"
+#include "gdbtypes.h"
+#include "gdbcmd.h"
+#include "gdbcore.h"
+#include "value.h"
+#include "dis-asm.h"
+#include "inferior.h"
+#include "gdb_string.h"
+#include "gdb_assert.h"
+#include "arch-utils.h"
+#include "floatformat.h"
+#include "regcache.h"
+#include "regset.h"
+#include "doublest.h"
+#include "osabi.h"
+#include "linux-tdep.h"
+#include "objfiles.h"
+#include "solib-svr4.h"
+#include "symtab.h"
+
+#include "../include/opcode/tilegx.h"
+
+/* TILE-Gx has 56 general purpose registers (R0 - R52, TP, SP, LR),
+ * plus 8 special general purpose registers (network and ZERO),
+ * plus 1 magic register (PC).
+ *
+ * TP (aka R53) is the thread specific data pointer.
+ * SP (aka R54) is the stack pointer.
+ * LR (aka R55) is the link register.
+ */
+enum {
+
+ E_R0_REGNUM,
+ E_R1_REGNUM,
+ E_R2_REGNUM,
+ E_R3_REGNUM,
+ E_R4_REGNUM,
+ E_R5_REGNUM,
+ E_R6_REGNUM,
+ E_R7_REGNUM,
+ E_R8_REGNUM,
+ E_R9_REGNUM,
+ E_R10_REGNUM,
+ E_R11_REGNUM,
+ E_R12_REGNUM,
+ E_R13_REGNUM,
+ E_R14_REGNUM,
+ E_R15_REGNUM,
+ E_R16_REGNUM,
+ E_R17_REGNUM,
+ E_R18_REGNUM,
+ E_R19_REGNUM,
+ E_R20_REGNUM,
+ E_R21_REGNUM,
+ E_R22_REGNUM,
+ E_R23_REGNUM,
+ E_R24_REGNUM,
+ E_R25_REGNUM,
+ E_R26_REGNUM,
+ E_R27_REGNUM,
+ E_R28_REGNUM,
+ E_R29_REGNUM,
+ E_R30_REGNUM,
+ E_R31_REGNUM,
+ E_R32_REGNUM,
+ E_R33_REGNUM,
+ E_R34_REGNUM,
+ E_R35_REGNUM,
+ E_R36_REGNUM,
+ E_R37_REGNUM,
+ E_R38_REGNUM,
+ E_R39_REGNUM,
+ E_R40_REGNUM,
+ E_R41_REGNUM,
+ E_R42_REGNUM,
+ E_R43_REGNUM,
+ E_R44_REGNUM,
+ E_R45_REGNUM,
+ E_R46_REGNUM,
+ E_R47_REGNUM,
+ E_R48_REGNUM,
+ E_R49_REGNUM,
+ E_R50_REGNUM,
+ E_R51_REGNUM,
+ E_R52_REGNUM,
+ E_TP_REGNUM,
+ E_SP_REGNUM,
+ E_LR_REGNUM,
+
+ E_SN_REGNUM, E_NUM_EASY_REGS = E_SN_REGNUM, /* 56 */
+ E_IO0_REGNUM,
+ E_IO1_REGNUM,
+ E_US0_REGNUM,
+ E_US1_REGNUM,
+ E_US2_REGNUM,
+ E_US3_REGNUM,
+ E_ZERO_REGNUM,
+
+ E_PC_REGNUM, E_NUM_PHYS_REGS = E_PC_REGNUM, /* 64 */
+
+ E_NUM_REGS /* 65 */
+};
+
+
+struct tilegx_frame_cache
+{
+ /* Base address. */
+ CORE_ADDR base;
+ CORE_ADDR start_pc;
+ struct trad_frame_saved_reg *saved_regs;
+};
+
+enum reverse_state {
+ REVERSE_STATE_REGISTER,
+ REVERSE_STATE_VALUE,
+ REVERSE_STATE_UNKNOWN
+};
+
+struct tilegx_reverse_regs
+{
+ LONGEST value;
+ enum reverse_state state;
+};
+
+/* ISSUE: Shouldn't the last entry have "0" as its "value"? */
+static const struct tilegx_reverse_regs
+template_reverse_regs[E_NUM_PHYS_REGS] =
+ {
+ { E_R0_REGNUM, REVERSE_STATE_REGISTER },
+ { E_R1_REGNUM, REVERSE_STATE_REGISTER },
+ { E_R2_REGNUM, REVERSE_STATE_REGISTER },
+ { E_R3_REGNUM, REVERSE_STATE_REGISTER },
+ { E_R4_REGNUM, REVERSE_STATE_REGISTER },
+ { E_R5_REGNUM, REVERSE_STATE_REGISTER },
+ { E_R6_REGNUM, REVERSE_STATE_REGISTER },
+ { E_R7_REGNUM, REVERSE_STATE_REGISTER },
+ { E_R8_REGNUM, REVERSE_STATE_REGISTER },
+ { E_R9_REGNUM, REVERSE_STATE_REGISTER },
+ { E_R10_REGNUM, REVERSE_STATE_REGISTER },
+ { E_R11_REGNUM, REVERSE_STATE_REGISTER },
+ { E_R12_REGNUM, REVERSE_STATE_REGISTER },
+ { E_R13_REGNUM, REVERSE_STATE_REGISTER },
+ { E_R14_REGNUM, REVERSE_STATE_REGISTER },
+ { E_R15_REGNUM, REVERSE_STATE_REGISTER },
+ { E_R16_REGNUM, REVERSE_STATE_REGISTER },
+ { E_R17_REGNUM, REVERSE_STATE_REGISTER },
+ { E_R18_REGNUM, REVERSE_STATE_REGISTER },
+ { E_R19_REGNUM, REVERSE_STATE_REGISTER },
+ { E_R20_REGNUM, REVERSE_STATE_REGISTER },
+ { E_R21_REGNUM, REVERSE_STATE_REGISTER },
+ { E_R22_REGNUM, REVERSE_STATE_REGISTER },
+ { E_R23_REGNUM, REVERSE_STATE_REGISTER },
+ { E_R24_REGNUM, REVERSE_STATE_REGISTER },
+ { E_R25_REGNUM, REVERSE_STATE_REGISTER },
+ { E_R26_REGNUM, REVERSE_STATE_REGISTER },
+ { E_R27_REGNUM, REVERSE_STATE_REGISTER },
+ { E_R28_REGNUM, REVERSE_STATE_REGISTER },
+ { E_R29_REGNUM, REVERSE_STATE_REGISTER },
+ { E_R30_REGNUM, REVERSE_STATE_REGISTER },
+ { E_R31_REGNUM, REVERSE_STATE_REGISTER },
+ { E_R32_REGNUM, REVERSE_STATE_REGISTER },
+ { E_R33_REGNUM, REVERSE_STATE_REGISTER },
+ { E_R34_REGNUM, REVERSE_STATE_REGISTER },
+ { E_R35_REGNUM, REVERSE_STATE_REGISTER },
+ { E_R36_REGNUM, REVERSE_STATE_REGISTER },
+ { E_R37_REGNUM, REVERSE_STATE_REGISTER },
+ { E_R38_REGNUM, REVERSE_STATE_REGISTER },
+ { E_R39_REGNUM, REVERSE_STATE_REGISTER },
+ { E_R40_REGNUM, REVERSE_STATE_REGISTER },
+ { E_R41_REGNUM, REVERSE_STATE_REGISTER },
+ { E_R42_REGNUM, REVERSE_STATE_REGISTER },
+ { E_R43_REGNUM, REVERSE_STATE_REGISTER },
+ { E_R44_REGNUM, REVERSE_STATE_REGISTER },
+ { E_R45_REGNUM, REVERSE_STATE_REGISTER },
+ { E_R46_REGNUM, REVERSE_STATE_REGISTER },
+ { E_R47_REGNUM, REVERSE_STATE_REGISTER },
+ { E_R48_REGNUM, REVERSE_STATE_REGISTER },
+ { E_R49_REGNUM, REVERSE_STATE_REGISTER },
+ { E_R50_REGNUM, REVERSE_STATE_REGISTER },
+ { E_R51_REGNUM, REVERSE_STATE_REGISTER },
+ { E_R52_REGNUM, REVERSE_STATE_REGISTER },
+ { E_TP_REGNUM, REVERSE_STATE_REGISTER },
+ { E_SP_REGNUM, REVERSE_STATE_REGISTER },
+ { E_LR_REGNUM, REVERSE_STATE_REGISTER },
+ { 0, REVERSE_STATE_UNKNOWN },
+ { 0, REVERSE_STATE_UNKNOWN },
+ { 0, REVERSE_STATE_UNKNOWN },
+ { 0, REVERSE_STATE_UNKNOWN },
+ { 0, REVERSE_STATE_UNKNOWN },
+ { 0, REVERSE_STATE_UNKNOWN },
+ { 0, REVERSE_STATE_UNKNOWN },
+ { E_ZERO_REGNUM, REVERSE_STATE_VALUE }
+ };
+
+
+enum { tilegx_reg_size = 8 };
+
+/* This is the implementation of gdbarch method register_name. */
+
+static const char *
+tilegx_register_name (struct gdbarch *gdbarch, int regnum)
+{
+ static const char *const register_names[E_NUM_REGS] =
+ {
+ "r0", "r1", "r2", "r3", "r4", "r5", "r6", "r7",
+ "r8", "r9", "r10", "r11", "r12", "r13", "r14", "r15",
+ "r16", "r17", "r18", "r19", "r20", "r21", "r22", "r23",
+ "r24", "r25", "r26", "r27", "r28", "r29", "r30", "r31",
+ "r32", "r33", "r34", "r35", "r36", "r37", "r38", "r39",
+ "r40", "r41", "r42", "r43", "r44", "r45", "r46", "r47",
+ "r48", "r49", "r50", "r51", "r52", "tp", "sp", "lr",
+ "sn", "idn0", "idn1", "udn0", "udn1", "udn2", "udn3", "zero",
+ "pc"
+ };
+
+ if (regnum < 0 || regnum >= E_NUM_REGS)
+ internal_error (__FILE__, __LINE__,
+ "tilegx_register_name: illegal register number %d",
+ regnum);
+
+ return register_names[regnum];
+}
+
+/* This is the implementation of gdbarch method register_type. */
+
+static struct type *
+tilegx_register_type (struct gdbarch *gdbarch, int regnum)
+{
+ if (regnum == E_PC_REGNUM)
+ return builtin_type (gdbarch)->builtin_func_ptr;
+ else
+ return builtin_type (gdbarch)->builtin_uint64;
+}
+
+static int
+tilegx_dwarf2_reg_to_regnum (struct gdbarch *gdbarch, int num)
+{
+ return num;
+}
+
+
+/* Makes the decision if a given type is a scalar type. Scalar
+ types are returned in the registers r2-r11 as they fit. */
+
+static int
+tilegx_type_is_scalar (struct type *t)
+{
+ return (TYPE_CODE(t) != TYPE_CODE_STRUCT
+ && TYPE_CODE(t) != TYPE_CODE_UNION
+ && TYPE_CODE(t) != TYPE_CODE_ARRAY);
+}
+
+/* Returns non-zero if the given struct type will be returned using
+ a special convention, rather than the normal function return method.
+ Used in the context of the "return" command, and target function
+ calls from the debugger. */
+
+static int
+tilegx_use_struct_convention (struct type *type)
+{
+ /* Only scalars which fit in R0 - R9 can be returned in registers.
+ Otherwise, they are returned via a pointer passed in R0. */
+ return !tilegx_type_is_scalar (type)
+ && (TYPE_LENGTH (type) > (1 + E_R9_REGNUM - E_R0_REGNUM) * tilegx_reg_size);
+}
+
+/* Find a function's return value in the appropriate registers (in
+ regbuf), and copy it into valbuf. */
+
+static void
+tilegx_extract_return_value (struct type *type, struct regcache *regcache,
+ void *valbuf)
+{
+ int len = TYPE_LENGTH (type);
+ int i, regnum = E_R0_REGNUM;
+
+ for (i = 0; i < len; i += tilegx_reg_size)
+ regcache_raw_read (regcache, regnum++, (char *) valbuf + i);
+}
+
+/* Copy the function return value from VALBUF into the
+ proper location for a function return.
+ Called only in the context of the "return" command. */
+
+static void
+tilegx_store_return_value (struct type *type, struct regcache *regcache,
+ const void *valbuf)
+{
+ if (TYPE_LENGTH (type) < tilegx_reg_size)
+ {
+ /* Add leading zeros to the value. */
+ char buf[tilegx_reg_size];
+
+ memset (buf, 0, tilegx_reg_size);
+ memcpy (buf, valbuf, TYPE_LENGTH (type));
+ regcache_raw_write (regcache, E_R0_REGNUM, buf);
+ }
+ else
+ {
+ int len = TYPE_LENGTH (type);
+ int i, regnum = E_R0_REGNUM;
+
+ for (i = 0; i < len; i += tilegx_reg_size)
+ regcache_raw_write (regcache, regnum++, (char *) valbuf + i);
+ }
+}
+
+
+static enum return_value_convention
+tilegx_return_value (struct gdbarch *gdbarch, struct type *func_type,
+ struct type *type, struct regcache *regcache,
+ gdb_byte *readbuf, const gdb_byte *writebuf)
+{
+ if (tilegx_use_struct_convention (type))
+ return RETURN_VALUE_STRUCT_CONVENTION;
+ if (writebuf)
+ tilegx_store_return_value (type, regcache, writebuf);
+ else if (readbuf)
+ tilegx_extract_return_value (type, regcache, readbuf);
+ return RETURN_VALUE_REGISTER_CONVENTION;
+}
+
+static CORE_ADDR
+tilegx_frame_align (struct gdbarch *gdbarch, CORE_ADDR addr)
+{
+ return addr & -8;
+}
+
+
+/* Setup the function arguments for GDB to call a function in the inferior.
+ Called only in the context of a target function call from the debugger.
+ Returns the value of the SP register after the args are pushed. */
+
+static CORE_ADDR
+tilegx_push_dummy_call (struct gdbarch *gdbarch,
+ struct value *function,
+ struct regcache *regcache,
+ CORE_ADDR bp_addr, int nargs,
+ struct value **args,
+ CORE_ADDR sp, int struct_return,
+ CORE_ADDR struct_addr)
+{
+ enum bfd_endian byte_order = gdbarch_byte_order (gdbarch);
+ CORE_ADDR stack_dest = sp;
+ int argreg = E_R0_REGNUM;
+ int i, j;
+ int typelen, slacklen, alignlen;
+ static const int zero_words[2] = { 0, 0 };
+
+ /* If struct_return is 1, then the struct return address will
+ consume one argument-passing register. */
+ if (struct_return)
+ regcache_cooked_write_unsigned (regcache, argreg++, struct_addr);
+
+ /* Arguments are passed in R0 - R9, and as soon as an argument will not
+ fit completely in the remaining registers, then it, and all remaining
+ arguments, are put on the stack. */
+ for (i = 0; i < nargs && argreg <= E_R9_REGNUM; i++)
+ {
+ const char *val;
+ typelen = TYPE_LENGTH (value_enclosing_type (args[i]));
+
+ if (typelen > (E_R9_REGNUM - argreg + 1) * tilegx_reg_size)
+ break;
+
+ /* Put argument into registers wordwise. */
+ val = value_contents (args[i]);
+ for (j = 0; j < typelen; j += tilegx_reg_size)
+ {
+ /* ISSUE: Why special handling (only) for "typelen = 4x + 1"?
+ I am unable to induce any "typelen" values except 4 and 8. */
+ int n = (typelen - j == 1) ? 1 : tilegx_reg_size;
+ ULONGEST w = extract_unsigned_integer(val + j, n, byte_order);
+ regcache_cooked_write_unsigned (regcache, argreg++, w);
+ }
+ }
+
+ /* Align SP. */
+ stack_dest = tilegx_frame_align (gdbarch, stack_dest);
+
+ /* Loop backwards through arguments to determine stack alignment. */
+ alignlen = 0;
+
+ for (j = nargs - 1; j >= i; j--)
+ {
+ typelen = TYPE_LENGTH (value_enclosing_type (args[j]));
+ alignlen += (typelen + 3) & (~3);
+ }
+
+ if (alignlen & 0x4)
+ stack_dest -= 4;
+
+ /* Loop backwards through remaining arguments and push them on the stack,
+ wordaligned. */
+ for (j = nargs - 1; j >= i; j--)
+ {
+ char *val;
+ typelen = TYPE_LENGTH (value_enclosing_type (args[j]));
+ slacklen = ((typelen + 3) & (~3)) - typelen;
+ val = alloca (typelen + slacklen);
+ memcpy (val, value_contents (args[j]), typelen);
+ memset (val + typelen, 0, slacklen);
+
+ /* Now write this data to the stack. The stack grows downwards. */
+ stack_dest -= typelen + slacklen;
+ write_memory (stack_dest, val, typelen + slacklen);
+ }
+
+ /* Add 2 words for linkage space to the stack. */
+ stack_dest = stack_dest - 8;
+ write_memory (stack_dest, (void*)zero_words, 8);
+
+ /* Update stack pointer. */
+ regcache_cooked_write_unsigned (regcache, E_SP_REGNUM, stack_dest);
+
+ /* Set the return address register to point to the entry point of
+ the program, where a breakpoint lies in wait. */
+ regcache_cooked_write_unsigned (regcache, E_LR_REGNUM, bp_addr);
+
+ return stack_dest;
+}
+
+
+/* Decode the instructions within the given address range.
+ Decide when we must have reached the end of the function prologue.
+ If a frame_info pointer is provided, fill in its saved_regs etc.
+ Returns the address of the first instruction after the prologue.
+ NOTE: This is often called with start_addr being the start of some
+ function, and end_addr being the current PC. */
+
+static CORE_ADDR
+tilegx_analyze_prologue (CORE_ADDR start_addr, CORE_ADDR end_addr,
+ struct tilegx_frame_cache *cache,
+ struct frame_info *next_frame)
+{
+ CORE_ADDR next_addr;
+ CORE_ADDR prolog_end = end_addr;
+ ULONGEST inst, inst2;
+ LONGEST offset;
+ int regnum;
+ char instbuf[32 * TILEGX_BUNDLE_SIZE_IN_BYTES];
+ CORE_ADDR instbuf_start;
+ unsigned int instbuf_size;
+ int status;
+ bfd_uint64_t bundle;
+ struct tilegx_decoded_instruction decoded[TILEGX_MAX_INSTRUCTIONS_PER_BUNDLE];
+ int num_insns;
+ struct tilegx_reverse_regs reverse_frame[E_NUM_PHYS_REGS];
+ struct tilegx_reverse_regs new_reverse_frame[TILEGX_MAX_INSTRUCTIONS_PER_BUNDLE];
+ int dest_regs[TILEGX_MAX_INSTRUCTIONS_PER_BUNDLE];
+ int reverse_frame_valid, prolog_done, branch_seen;
+ LONGEST prev_sp_value;
+ int i, j;
+
+ if (start_addr >= end_addr
+ || (start_addr % TILEGX_BUNDLE_ALIGNMENT_IN_BYTES) != 0)
+ return end_addr;
+
+ /* Initialize the reverse frame. This maps the CURRENT frame's registers
+ to the outer frame's registers (the frame on the stack goes the other
+ way). */
+ memcpy(&reverse_frame, &template_reverse_regs, sizeof(reverse_frame));
+
+ prolog_done = 0;
+ branch_seen = 0;
+ prev_sp_value = 0;
+
+ /* To cut down on round-trip overhead, we fetch multiple bundles at once.
+ * These variables describe the range of memory we have prefetched. */
+ instbuf_start = 0;
+ instbuf_size = 0;
+
+ for (next_addr = start_addr; next_addr < end_addr;
+ next_addr += TILEGX_BUNDLE_SIZE_IN_BYTES)
+ {
+ /* Retrieve the next instruction. */
+ if (next_addr - instbuf_start >= instbuf_size)
+ {
+ /* Figure out how many bytes to fetch. Don't span a page boundary
+ since that might cause an unnecessary memory error. */
+ unsigned int size_on_same_page = 4096 - (next_addr & 4095);
+ instbuf_size = sizeof instbuf;
+ if (instbuf_size > size_on_same_page)
+ instbuf_size = size_on_same_page;
+ instbuf_start = next_addr;
+
+ status = safe_frame_unwind_memory(next_frame, instbuf_start, instbuf,
+ instbuf_size);
+ if (status == 0)
+ memory_error(status, next_addr);
+ }
+
+ reverse_frame_valid = 0;
+
+ bundle = bfd_getl64(&instbuf[next_addr - instbuf_start]);
+
+ num_insns = parse_insn_tilegx(bundle, next_addr, decoded);
+
+ for (i = 0; i < num_insns; i++)
+ {
+ struct tilegx_decoded_instruction *this_insn = &decoded[i];
+ long long *operands = this_insn->operand_values;
+ const struct tilegx_opcode *opcode = this_insn->opcode;
+ switch(opcode->mnemonic)
+ {
+ case TILEGX_OPC_ST:
+ if (cache &&
+ reverse_frame[operands[0]].state == REVERSE_STATE_VALUE
+ && reverse_frame[operands[1]].state == REVERSE_STATE_REGISTER)
+ {
+ LONGEST saved_address = reverse_frame[operands[0]].value;
+ unsigned saved_register = (unsigned)reverse_frame[operands[1]].value;
+ /* realreg >= 0 and addr != -1 indicates that the value
+ of saved_register is in memory location saved_address.
+ The value of realreg is not meaningful in this case but
+ it must be >= 0. See trad-frame.h */
+ cache->saved_regs[saved_register].realreg = saved_register;
+ cache->saved_regs[saved_register].addr = saved_address;
+ }
+ break;
+ case TILEGX_OPC_ADDI:
+ case TILEGX_OPC_ADDLI:
+ if (cache
+ && operands[0] == E_SP_REGNUM
+ && operands[1] == E_SP_REGNUM
+ && reverse_frame[operands[1]].state ==
+ REVERSE_STATE_REGISTER)
+ {
+ /* This is a special case. We're fixing up the stack frame. */
+ unsigned long long hopefully_sp =
+ (unsigned)reverse_frame[operands[1]].value;
+ short op2_as_short = (short)operands[2];
+ signed char op2_as_char = (signed char)operands[2];
+
+ /* Fix up the sign-extension. */
+ if (opcode->mnemonic == TILEGX_OPC_ADDI)
+ op2_as_short = op2_as_char;
+ prev_sp_value = cache->saved_regs[hopefully_sp].addr - op2_as_short;
+
+ new_reverse_frame[i].state = REVERSE_STATE_VALUE;
+ new_reverse_frame[i].value = cache->saved_regs[hopefully_sp].addr;
+ trad_frame_set_value(cache->saved_regs, hopefully_sp, prev_sp_value);
+ }
+ else
+ {
+ short op2_as_short = (short)operands[2];
+ signed char op2_as_char = (signed char)operands[2];
+
+ /* Fix up the sign-extension. */
+ if (opcode->mnemonic == TILEGX_OPC_ADDI)
+ op2_as_short = op2_as_char;
+
+ new_reverse_frame[i] = reverse_frame[operands[1]];
+ if (new_reverse_frame[i].state == REVERSE_STATE_VALUE)
+ new_reverse_frame[i].value += op2_as_short;
+ else
+ new_reverse_frame[i].state = REVERSE_STATE_UNKNOWN;
+ }
+ reverse_frame_valid |= 1<<i;
+ dest_regs[i] = operands[0];
+ break;
+ case TILEGX_OPC_ADD:
+ if (reverse_frame[operands[1]].state == REVERSE_STATE_VALUE
+ && reverse_frame[operands[2]].state == REVERSE_STATE_VALUE)
+ {
+ /* We have values -- we can do this. */
+ new_reverse_frame[i] = reverse_frame[operands[2]];
+ new_reverse_frame[i].value += reverse_frame[operands[i]].value;
+ }
+ else
+ {
+ /* We don't know anything about the values. Punt. */
+ new_reverse_frame[i].state = REVERSE_STATE_UNKNOWN;
+ }
+ reverse_frame_valid |= 1<<i;
+ dest_regs[i] = operands[0];
+ break;
+ case TILEGX_OPC_MOVE:
+ new_reverse_frame[i] = reverse_frame[operands[1]];
+ reverse_frame_valid |= 1<<i;
+ dest_regs[i] = operands[0];
+ break;
+ case TILEGX_OPC_MOVEI:
+ case TILEGX_OPC_MOVELI:
+ new_reverse_frame[i].state = REVERSE_STATE_VALUE;
+ new_reverse_frame[i].value = operands[1];
+ reverse_frame_valid |= 1<<i;
+ dest_regs[i] = operands[0];
+ break;
+ case TILEGX_OPC_ORI:
+ if (reverse_frame[operands[1]].state == REVERSE_STATE_VALUE)
+ {
+ /* We have a value in A -- we can do this. */
+ new_reverse_frame[i] = reverse_frame[operands[1]];
+ new_reverse_frame[i].value =
+ reverse_frame[operands[1]].value | operands[2];
+ }
+ else if (operands[2] == 0)
+ {
+ /* This is a move. */
+ new_reverse_frame[i] = reverse_frame[operands[1]];
+ }
+ else
+ {
+ /* We don't know anything about the values. Punt. */
+ new_reverse_frame[i].state = REVERSE_STATE_UNKNOWN;
+ }
+ reverse_frame_valid |= 1<<i;
+ dest_regs[i] = operands[0];
+ break;
+ case TILEGX_OPC_OR:
+ if (reverse_frame[operands[1]].state == REVERSE_STATE_VALUE
+ && reverse_frame[operands[1]].value == 0)
+ {
+ /* This is a move. */
+ new_reverse_frame[i] = reverse_frame[operands[2]];
+ }
+ else if (reverse_frame[operands[2]].state == REVERSE_STATE_VALUE
+ && reverse_frame[operands[2]].value == 0)
+ {
+ /* This is a move. */
+ new_reverse_frame[i] = reverse_frame[operands[1]];
+ }
+ else
+ {
+ /* We don't know anything about the values. Punt. */
+ new_reverse_frame[i].state = REVERSE_STATE_UNKNOWN;
+ }
+ reverse_frame_valid |= 1<<i;
+ dest_regs[i] = operands[0];
+ break;
+ case TILEGX_OPC_SUB:
+ if (reverse_frame[operands[1]].state == REVERSE_STATE_VALUE
+ && reverse_frame[operands[2]].state == REVERSE_STATE_VALUE)
+ {
+ /* We have values -- we can do this. */
+ new_reverse_frame[i] = reverse_frame[operands[1]];
+ new_reverse_frame[i].value -= reverse_frame[operands[2]].value;
+ }
+ else
+ {
+ /* We don't know anything about the values. Punt. */
+ new_reverse_frame[i].state = REVERSE_STATE_UNKNOWN;
+ }
+ reverse_frame_valid |= 1<<i;
+ dest_regs[i] = operands[0];
+ break;
+
+ case TILEGX_OPC_FNOP:
+ case TILEGX_OPC_INFO:
+ case TILEGX_OPC_INFOL:
+ /* Nothing to see here, move on.
+ * Note that real NOP is treated as a 'real' instruction
+ * because someone must have intended that it be there.
+ * It therefore terminates the prolog.
+ */
+ break;
+
+ case TILEGX_OPC_J:
+ case TILEGX_OPC_JAL:
+
+ case TILEGX_OPC_BEQZ:
+ case TILEGX_OPC_BEQZT:
+ case TILEGX_OPC_BGEZ:
+ case TILEGX_OPC_BGEZT:
+ case TILEGX_OPC_BGTZ:
+ case TILEGX_OPC_BGTZT:
+ case TILEGX_OPC_BLBC:
+ case TILEGX_OPC_BLBCT:
+ case TILEGX_OPC_BLBS:
+ case TILEGX_OPC_BLBST:
+ case TILEGX_OPC_BLEZ:
+ case TILEGX_OPC_BLEZT:
+ case TILEGX_OPC_BLTZ:
+ case TILEGX_OPC_BLTZT:
+ case TILEGX_OPC_BNEZ:
+ case TILEGX_OPC_BNEZT:
+
+ case TILEGX_OPC_IRET:
+ case TILEGX_OPC_JALR:
+ case TILEGX_OPC_JALRP:
+ case TILEGX_OPC_JR:
+ case TILEGX_OPC_JRP:
+ case TILEGX_OPC_SWINT0:
+ case TILEGX_OPC_SWINT1:
+ case TILEGX_OPC_SWINT2:
+ case TILEGX_OPC_SWINT3:
+ /* we're really done -- this is a branch */
+ branch_seen = 1;
+ prolog_done = 1;
+ break;
+ default:
+ /* We don't know or care what this instruction is.
+ All we know is that it isn't part of a prolog, and if
+ there's a destination register, we're trashing it. */
+ prolog_done = 1;
+ for (j = 0; j < opcode->num_operands; j++)
+ {
+ if (this_insn->operands[j]->is_dest_reg)
+ {
+ dest_regs[i] = operands[j];
+ new_reverse_frame[i].state = REVERSE_STATE_UNKNOWN;
+ reverse_frame_valid |= 1<<i;
+ break;
+ }
+ }
+ break;
+ }
+ }
+
+ /* Now update the reverse frames. */
+ for (i = 0; i < num_insns; i++)
+ {
+ /* ISSUE: Does this properly handle "network" registers? */
+ if ((reverse_frame_valid & (1<<i)) && dest_regs[i] != E_ZERO_REGNUM)
+ {
+ reverse_frame[dest_regs[i]] = new_reverse_frame[i];
+ }
+ }
+
+ if (prev_sp_value != 0)
+ {
+ /* GCC uses R52 as a frame pointer. Have we seen "move r52, sp"? */
+ if (reverse_frame[E_R52_REGNUM].state == REVERSE_STATE_REGISTER
+ && reverse_frame[E_R52_REGNUM].value == E_SP_REGNUM)
+ {
+ reverse_frame[E_R52_REGNUM].state = REVERSE_STATE_VALUE;
+ reverse_frame[E_R52_REGNUM].value = prev_sp_value;
+ }
+
+ prev_sp_value = 0;
+ }
+
+ if (prolog_done && prolog_end == end_addr)
+ {
+ /* We found some non-prolog code. As such, _this_ instruction is the
+ one after the prolog. We keep processing, because there may be more
+ prolog code in there, but this is what we'll return. */
+ /* ISSUE: There may not have actually been a prologue, and we may
+ have simply skipped some random instructions. */
+ prolog_end = next_addr;
+ }
+ if (branch_seen)
+ {
+ /* We saw a branch. The prolog absolutely must be over. */
+ break;
+ }
+ }
+
+ if (prolog_end == end_addr && cache)
+ {
+ /* We may have terminated the prolog early, and we're certainly at THIS
+ point right now. It's possible that the values of registers we need are
+ currently actually in other registers (and haven't been written to
+ memory yet). Go find them. */
+ for (i = 0; i < E_NUM_PHYS_REGS; i++)
+ {
+ if (reverse_frame[i].state == REVERSE_STATE_REGISTER
+ && reverse_frame[i].value != i)
+ {
+ unsigned saved_register = (unsigned)reverse_frame[i].value;
+ cache->saved_regs[saved_register].realreg = i;
+ cache->saved_regs[saved_register].addr = (LONGEST)-1;
+ }
+ }
+ }
+
+ return prolog_end;
+}
+
+/* If the input address is in a function prologue,
+ returns the address of the end of the prologue;
+ else returns the input address.
+
+ Note: the input address is likely to be the function start,
+ since this function is mainly used for advancing a breakpoint
+ to the first line, or stepping to the first line when we have
+ stepped into a function call. */
+
+static CORE_ADDR
+tilegx_skip_prologue (struct gdbarch *gdbarch, CORE_ADDR pc)
+{
+ struct symtab_and_line sal;
+ CORE_ADDR func_start, func_end;
+
+ /* This is the preferred method, find the end of the prologue by
+ using the debugging information. */
+ if (find_pc_partial_function (pc, NULL, &func_start, &func_end))
+ {
+ sal = find_pc_line (func_start, 0);
+
+ if (sal.end < func_end && pc <= sal.end)
+ return sal.end;
+ }
+
+ /* Otherwise, try to skip prologue the hard way. */
+ return tilegx_analyze_prologue (pc, pc + 8 * TILEGX_BUNDLE_SIZE_IN_BYTES,
+ NULL, NULL);
+}
+
+/* The epilogue is defined here as the area at the end of a function,
+ either on the `ret' instruction itself or after an instruction which
+ destroys the function's stack frame. */
+static int
+tilegx_in_function_epilogue_p (struct gdbarch *gdbarch, CORE_ADDR pc)
+{
+ CORE_ADDR func_addr = 0, func_end = 0;
+
+ if (find_pc_partial_function (pc, NULL, &func_addr, &func_end))
+ {
+ ULONGEST inst, inst2;
+ CORE_ADDR addr = func_end - TILEGX_BUNDLE_SIZE_IN_BYTES;
+
+ /* FIXME: Find the actual epilogue. */
+ /* HACK: Just assume the final bundle is the "ret" instruction". */
+ if (pc > addr)
+ return 1;
+ }
+ return 0;
+}
+
+
+static const unsigned char *
+tilegx_breakpoint_from_pc (struct gdbarch *gdbarch,
+ CORE_ADDR *pcptr, int *lenptr)
+{
+ static unsigned char breakpoint[sizeof(tilegx_bundle_bits)];
+
+ tilegx_bundle_bits bits = TILEGX_BPT_BUNDLE;
+ unsigned int i;
+
+ for (i = 0; i < sizeof(breakpoint); i++)
+ {
+ breakpoint[i] = (unsigned char)bits;
+ bits >>= 8;
+ }
+
+ *lenptr = sizeof (breakpoint);
+ return breakpoint;
+}
+
+
+/* Normal frames. */
+
+static struct tilegx_frame_cache *
+tilegx_frame_cache (struct frame_info *this_frame, void **this_cache)
+{
+ struct gdbarch *gdbarch = get_frame_arch (this_frame);
+ struct tilegx_frame_cache *cache;
+ CORE_ADDR current_pc;
+ int i;
+
+ if (*this_cache)
+ return *this_cache;
+
+ cache = FRAME_OBSTACK_ZALLOC (struct tilegx_frame_cache);
+ *this_cache = cache;
+ cache->saved_regs = trad_frame_alloc_saved_regs (this_frame);
+ cache->base = 0;
+ cache->start_pc = get_frame_func (this_frame);
+ current_pc = get_frame_pc (this_frame);
+
+ cache->base = get_frame_register_unsigned (this_frame, E_SP_REGNUM);
+ trad_frame_set_value(cache->saved_regs, E_SP_REGNUM, cache->base);
+
+ cache->saved_regs[E_PC_REGNUM] = cache->saved_regs[E_LR_REGNUM];
+
+ if (cache->start_pc)
+ tilegx_analyze_prologue (cache->start_pc, current_pc, cache, this_frame);
+
+ return cache;
+}
+
+static struct value*
+tilegx_frame_prev_register (struct frame_info *this_frame,
+ void **this_cache,
+ int regnum)
+{
+ struct tilegx_frame_cache *info = tilegx_frame_cache (this_frame, this_cache);
+
+ return trad_frame_get_prev_register (this_frame, info->saved_regs, regnum);
+}
+
+static void
+tilegx_frame_this_id (struct frame_info *this_frame, void **this_cache,
+ struct frame_id *this_id)
+{
+ struct tilegx_frame_cache *info = tilegx_frame_cache (this_frame, this_cache);
+
+ /* This marks the outermost frame. */
+ if (info->base == 0)
+ return;
+
+ (*this_id) = frame_id_build (info->base, info->start_pc);
+}
+
+static CORE_ADDR
+tilegx_frame_base_address (struct frame_info *this_frame, void **this_cache)
+{
+ struct tilegx_frame_cache *cache = tilegx_frame_cache (this_frame, this_cache);
+
+ return cache->base;
+}
+
+static const struct frame_unwind tilegx_frame_unwind = {
+ NORMAL_FRAME,
+ default_frame_unwind_stop_reason,
+ tilegx_frame_this_id,
+ tilegx_frame_prev_register,
+ NULL, /* const struct frame_data *unwind_data */
+ default_frame_sniffer, /* frame_sniffer_ftype *sniffer */
+ NULL /* frame_prev_pc_ftype *prev_pc */
+};
+
+static const struct frame_base tilegx_frame_base = {
+ &tilegx_frame_unwind,
+ tilegx_frame_base_address,
+ tilegx_frame_base_address,
+ tilegx_frame_base_address
+};
+
+static CORE_ADDR
+tilegx_unwind_sp (struct gdbarch *gdbarch, struct frame_info *next_frame)
+{
+ return frame_unwind_register_unsigned (next_frame, E_SP_REGNUM);
+}
+
+static CORE_ADDR
+tilegx_unwind_pc (struct gdbarch *gdbarch, struct frame_info *next_frame)
+{
+ return frame_unwind_register_unsigned (next_frame, E_PC_REGNUM);
+}
+
+static struct frame_id
+tilegx_unwind_dummy_id (struct gdbarch *gdbarch,
+ struct frame_info *this_frame)
+{
+ CORE_ADDR sp;
+
+ sp = get_frame_register_unsigned (this_frame, E_SP_REGNUM);
+ return frame_id_build (sp, get_frame_pc (this_frame));
+}
+
+
+/* We cannot read/write the "special" registers. */
+
+static int
+tilegx_cannot_reference_register (struct gdbarch *gdbarch, int regno)
+{
+ if (regno >= 0 && regno < E_NUM_EASY_REGS)
+ return 0;
+ else if (regno == E_PC_REGNUM)
+ return 0;
+ else
+ return 1;
+}
+
+
+/* This logic must match that of struct pt_regs in "ptrace.h". */
+
+static void
+tilegx_linux_supply_regset (const struct regset *regset,
+ struct regcache *regcache,
+ int regnum, const void *regs, size_t len)
+{
+ struct gdbarch *arch = get_regcache_arch (regcache);
+ const char *ptr = regs;
+ int i;
+
+ for (i = 0; i < E_NUM_EASY_REGS + 1; i++, ptr += tilegx_reg_size)
+ {
+ int gri = (i < E_NUM_EASY_REGS) ? i : E_PC_REGNUM;
+ if (regnum == gri || regnum == -1)
+ regcache_raw_supply (regcache, gri, ptr);
+ }
+}
+
+
+/* TILE-Gx Linux kernal register set. */
+static struct regset tilegx_linux_regset =
+{
+ NULL,
+ tilegx_linux_supply_regset
+};
+
+static const struct regset *
+tilegx_regset_from_core_section (struct gdbarch *gdbarch,
+ const char *sect_name,
+ size_t sect_size)
+{
+ if (strcmp (sect_name, ".reg") == 0)
+ return &tilegx_linux_regset;
+
+ return NULL;
+}
+
+
+/* Initializer function for the tilegx gdbarch vector.
+ Called by gdbarch. Sets up the gdbarch vector(s) for this target. */
+
+static struct gdbarch *
+tilegx_gdbarch_init (struct gdbarch_info info, struct gdbarch_list *arches)
+{
+ struct gdbarch *gdbarch;
+ int arch_size = 64;
+
+ /* Handle arch_size == 32 or 64. Default to 64. */
+ if (info.abfd)
+ arch_size = bfd_get_arch_size(info.abfd);
+
+ if (arch_size != 32)
+ arch_size = 64;
+
+ /* try to find a pre-existing architecture */
+ for (arches = gdbarch_list_lookup_by_info (arches, &info);
+ arches != NULL;
+ arches = gdbarch_list_lookup_by_info (arches->next, &info))
+ {
+ /* We only have two flavors -- just make sure arch_size matches. */
+ if (gdbarch_ptr_bit(arches->gdbarch) == arch_size)
+ return (arches->gdbarch);
+ }
+
+ gdbarch = gdbarch_alloc (&info, NULL);
+
+ /* Basic register fields and methods, datatype sizes and stuff. */
+
+ /* There are 64 physical registers, which can be referenced by instructions
+ (although only 56 of them can actually be debugged) and 1 magic register
+ (the PC). The other three magic registers (ex1, syscall, orig_r0) which
+ are known to "ptrace" are ignored by "gdb". Note that we simply pretend
+ that there are 65 registers, and no "pseudo registers". */
+ set_gdbarch_num_regs (gdbarch, E_NUM_REGS);
+ set_gdbarch_num_pseudo_regs (gdbarch, 0);
+
+ set_gdbarch_sp_regnum (gdbarch, E_SP_REGNUM);
+ set_gdbarch_pc_regnum (gdbarch, E_PC_REGNUM);
+
+ set_gdbarch_register_name (gdbarch, tilegx_register_name);
+ set_gdbarch_register_type (gdbarch, tilegx_register_type);
+
+ set_gdbarch_char_signed (gdbarch, 0);
+ set_gdbarch_short_bit (gdbarch, 2 * TARGET_CHAR_BIT);
+ set_gdbarch_int_bit (gdbarch, 4 * TARGET_CHAR_BIT);
+ set_gdbarch_long_bit (gdbarch, arch_size);
+ set_gdbarch_long_long_bit (gdbarch, 8 * TARGET_CHAR_BIT);
+
+ set_gdbarch_float_bit (gdbarch, 4 * TARGET_CHAR_BIT);
+ set_gdbarch_double_bit (gdbarch, 8 * TARGET_CHAR_BIT);
+ set_gdbarch_long_double_bit (gdbarch, 8 * TARGET_CHAR_BIT);
+
+ set_gdbarch_ptr_bit (gdbarch, arch_size);
+ set_gdbarch_addr_bit (gdbarch, arch_size);
+
+ set_gdbarch_cannot_fetch_register (gdbarch, tilegx_cannot_reference_register);
+ set_gdbarch_cannot_store_register (gdbarch, tilegx_cannot_reference_register);
+
+ set_gdbarch_regset_from_core_section (gdbarch,
+ tilegx_regset_from_core_section);
+
+ /* Stack grows down. */
+ set_gdbarch_inner_than (gdbarch, core_addr_lessthan);
+
+ /*
+ * Frame Info
+ */
+ set_gdbarch_unwind_sp (gdbarch, tilegx_unwind_sp);
+ set_gdbarch_unwind_pc (gdbarch, tilegx_unwind_pc);
+ set_gdbarch_dummy_id (gdbarch, tilegx_unwind_dummy_id);
+ set_gdbarch_frame_align (gdbarch, tilegx_frame_align);
+ frame_base_set_default (gdbarch, &tilegx_frame_base);
+
+ set_gdbarch_skip_prologue (gdbarch, tilegx_skip_prologue);
+
+ set_gdbarch_in_function_epilogue_p (gdbarch,
+ tilegx_in_function_epilogue_p);
+
+ /* Map debug registers into internal register numbers. */
+ set_gdbarch_dwarf2_reg_to_regnum (gdbarch, tilegx_dwarf2_reg_to_regnum);
+
+ /* These values and methods are used when gdb calls a target function. */
+ set_gdbarch_push_dummy_call (gdbarch, tilegx_push_dummy_call);
+ set_gdbarch_breakpoint_from_pc (gdbarch, tilegx_breakpoint_from_pc);
+ set_gdbarch_return_value (gdbarch, tilegx_return_value);
+
+ set_gdbarch_print_insn (gdbarch, print_insn_tilegx);
+
+ /* GNU/Linux uses SVR4-style shared libraries. */
+ if (arch_size == 32)
+ set_solib_svr4_fetch_link_map_offsets (gdbarch,
+ svr4_ilp32_fetch_link_map_offsets);
+ else
+ set_solib_svr4_fetch_link_map_offsets (gdbarch,
+ svr4_lp64_fetch_link_map_offsets);
+
+ /* Enable TLS support. */
+ set_gdbarch_fetch_tls_load_module_address (gdbarch,
+ svr4_fetch_objfile_link_map);
+
+ gdbarch_init_osabi (info, gdbarch);
+
+ dwarf2_append_unwinders(gdbarch);
+ frame_unwind_append_unwinder (gdbarch, &tilegx_frame_unwind);
+
+ return gdbarch;
+}
+
+static void
+tilegx_init_abi (struct gdbarch_info info, struct gdbarch *gdbarch)
+{
+ linux_init_abi (info, gdbarch);
+}
+
+
+/* Initializer function for the Tilera TILE-Gx chip.
+ Called by gdb at start-up. */
+
+extern initialize_file_ftype _initialize_tilegx_tdep; /* -Wmissing-prototypes */
+
+void
+_initialize_tilegx_tdep (void)
+{
+ /* tile-sim is so slow it needs a longer timeout. */
+ remote_timeout = 60;
+
+ register_gdbarch_init (bfd_arch_tilegx, tilegx_gdbarch_init);
+
+ gdbarch_register_osabi (bfd_arch_tilegx, 0, GDB_OSABI_LINUX, tilegx_init_abi);
+}
^ permalink raw reply [flat|nested] 33+ messages in thread* Re: [PATCH] Add support for Tilera TILE-Gx processor (part 2/2: gdbserver)
2012-04-20 12:54 ` Joel Brobecker
2012-04-20 14:03 ` Jeff Kenton
2012-04-23 19:59 ` Jeff Kenton
@ 2012-04-23 20:12 ` Jeff Kenton
2012-04-24 16:54 ` Pedro Alves
` (2 more replies)
2 siblings, 3 replies; 33+ messages in thread
From: Jeff Kenton @ 2012-04-23 20:12 UTC (permalink / raw)
To: Joel Brobecker; +Cc: gdb-patches
[-- Attachment #1: Type: text/plain, Size: 535 bytes --]
On 04/20/2012 08:43 AM, Joel Brobecker wrote:
> Hello Jeff,
>
> I agree on all of Yao's points. In addition, I would split your
> patches differently: I'd have one patch that adds support to GDB,
> and then another that adds support to GDBserver. I don't think
> it makes sense to have one patch with configury/Makefile changes
> on the one hand, because those changes do not make sense without
> the associated sources.
>
> If you need to be started on the copyright assignment, please
> let me know, and I will send you the form.
>
[-- Attachment #2: patch_2 --]
[-- Type: text/plain, Size: 6388 bytes --]
[PATCH] Add support for Tilera TILE-Gx processor (part 2/2: gdbserver)
I have re-organized my two part patch (submitted 4/19) in line
with suggestions from Joel and Yao. It is now separated into a GDB
port and a GDBserver port (this part).
Comments please.
Thanks.
jeff kenton (jkenton@tilera.com)
* New target
Tilera TILE-Gx tilegx-*-*
gdb/gdbserver/
* configure.srv: added target: tilegx-*-linux*
* linux-tile-low.c: new file
* Makefile.in: added files linux-tile-low.c and reg-tilegx.o
diff -r -u -N /home/packages/gdb-7.4x/gdb/gdbserver/configure.srv ./gdb/gdbserver/configure.srv
--- /home/packages/gdb-7.4x/gdb/gdbserver/configure.srv 2012-03-13 11:00:37.000000000 -0400
+++ ./gdb/gdbserver/configure.srv 2012-04-23 13:01:20.430924000 -0400
@@ -311,6 +311,12 @@
srv_tgtobj="${srv_tgtobj} linux-ptrace.o"
srv_linux_regsets=yes
;;
+ tilegx-*-linux*) srv_regobj=reg-tilegx.o
+ srv_tgtobj="linux-low.o linux-tile-low.o linux-osdata.o linux-procfs.o"
+ srv_tgtobj="${srv_tgtobj} linux-ptrace.o"
+ srv_linux_regsets=yes
+ srv_linux_thread_db=yes
+ ;;
*) echo "Error: target not supported by gdbserver."
exit 1
;;
diff -r -u -N /home/packages/gdb-7.4x/gdb/gdbserver/linux-tile-low.c ./gdb/gdbserver/linux-tile-low.c
--- /home/packages/gdb-7.4x/gdb/gdbserver/linux-tile-low.c 1969-12-31 19:00:00.000000000 -0500
+++ ./gdb/gdbserver/linux-tile-low.c 2012-04-23 13:01:20.444911000 -0400
@@ -0,0 +1,146 @@
+
+
+/* GNU/Linux/TILE-Gx specific low level interface, GDBserver.
+
+ Copyright (C) 2012 Free Software Foundation, Inc.
+
+ This file is part of GDB.
+
+ This program is free software; you can redistribute it and/or modify
+ it under the terms of the GNU General Public License as published by
+ the Free Software Foundation; either version 3 of the License, or
+ (at your option) any later version.
+
+ This program is distributed in the hope that it will be useful,
+ but WITHOUT ANY WARRANTY; without even the implied warranty of
+ MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ GNU General Public License for more details.
+
+ You should have received a copy of the GNU General Public License
+ along with this program. If not, see <http://www.gnu.org/licenses/>. */
+
+#include "server.h"
+#include "linux-low.h"
+
+#include <sys/ptrace.h>
+
+/* Defined in auto-generated file reg-tile.c. */
+void init_registers_tile (void);
+
+#define tile_num_regs 65
+
+static int tile_regmap[] =
+{
+ 0, 1, 2, 3, 4, 5, 6, 7,
+ 8, 9, 10, 11, 12, 13, 14, 15,
+ 16, 17, 18, 19, 20, 21, 22, 23,
+ 24, 25, 26, 27, 28, 29, 30, 31,
+ 32, 33, 34, 35, 36, 37, 38, 39,
+ 40, 41, 42, 43, 44, 45, 46, 47,
+ 48, 49, 50, 51, 52, 53, 54, 55,
+ -1, -1, -1, -1, -1, -1, -1, -1,
+ 56
+};
+
+static int
+tile_cannot_fetch_register (int regno)
+{
+ if (regno >= 0 && regno < 56)
+ return 0;
+ else if (regno == 64)
+ return 0;
+ else
+ return 1;
+}
+
+static int
+tile_cannot_store_register (int regno)
+{
+ if (regno >= 0 && regno < 56)
+ return 0;
+ else if (regno == 64)
+ return 0;
+ else
+ return 1;
+}
+
+static CORE_ADDR
+tile_get_pc (struct regcache *regcache)
+{
+ unsigned long pc;
+
+ collect_register_by_name (regcache, "pc", &pc);
+ return pc;
+}
+
+static void
+tile_set_pc (struct regcache *regcache, CORE_ADDR pc)
+{
+ unsigned long newpc = pc;
+
+ supply_register_by_name (regcache, "pc", &newpc);
+}
+
+static uint64_t tile_breakpoint = 0x400b3cae70166000ULL;
+#define tile_breakpoint_len 8
+
+static int
+tile_breakpoint_at (CORE_ADDR where)
+{
+ uint64_t insn;
+
+ (*the_target->read_memory) (where, (unsigned char *) &insn, 8);
+ if (insn == tile_breakpoint)
+ return 1;
+
+ /* If necessary, recognize more trap instructions here. GDB only uses the
+ one. */
+ return 0;
+}
+
+static void
+tile_fill_gregset (struct regcache *regcache, void *buf)
+{
+ int i;
+
+ for (i = 0; i < tile_num_regs; i++)
+ if (tile_regmap[i] != -1)
+ collect_register (regcache, i, ((unsigned int *) buf) + tile_regmap[i]);
+}
+
+static void
+tile_store_gregset (struct regcache *regcache, const void *buf)
+{
+ int i;
+ char zerobuf[8];
+
+ memset (zerobuf, 0, 8);
+ for (i = 0; i < tile_num_regs; i++)
+ if (tile_regmap[i] != -1)
+ supply_register (regcache, i, ((unsigned long *) buf) + tile_regmap[i]);
+ else
+ supply_register (regcache, i, zerobuf);
+}
+
+struct regset_info target_regsets[] = {
+ { PTRACE_GETREGS, PTRACE_SETREGS, 0, tile_num_regs * 4,
+ GENERAL_REGS, tile_fill_gregset, tile_store_gregset },
+ { 0, 0, 0, -1, -1, NULL, NULL }
+};
+
+struct linux_target_ops the_low_target = {
+ init_registers_tile,
+ tile_num_regs,
+ tile_regmap,
+ NULL,
+ tile_cannot_fetch_register,
+ tile_cannot_store_register,
+ NULL,
+ tile_get_pc,
+ tile_set_pc,
+ (const unsigned char *) &tile_breakpoint,
+ tile_breakpoint_len,
+ NULL,
+ 0,
+ tile_breakpoint_at,
+};
diff -r -u -N /home/packages/gdb-7.4x/gdb/gdbserver/Makefile.in ./gdb/gdbserver/Makefile.in
--- /home/packages/gdb-7.4x/gdb/gdbserver/Makefile.in 2012-03-13 11:00:37.000000000 -0400
+++ ./gdb/gdbserver/Makefile.in 2012-04-23 13:01:20.410904000 -0400
@@ -120,6 +120,7 @@
$(srcdir)/linux-sh-low.c $(srcdir)/linux-sparc-low.c \
$(srcdir)/linux-x86-low.c \
$(srcdir)/linux-xtensa-low.c \
+ $(srcdir)/linux-tile-low.c \
$(srcdir)/win32-arm-low.c $(srcdir)/win32-i386-low.c \
$(srcdir)/win32-low.c $(srcdir)/wincecompat.c \
$(srcdir)/hostio.c $(srcdir)/hostio-errno.c \
@@ -479,6 +480,7 @@
linux-x86-low.o: linux-x86-low.c $(linux_low_h) $(server_h) \
$(gdb_proc_service_h) $(i386_low_h) $(agent_h)
linux-xtensa-low.o: linux-xtensa-low.c xtensa-xtregs.c $(linux_low_h) $(server_h)
+linux-tile-low.o: linux-tile-low.c $(linux_low_h) $(server_h)
lynx-low.o: lynx-low.c $(server_h) $(target_h) $(lynx_low_h)
lynx-ppc-low.o: lynx-ppc-low.c $(server_h) $(lynx_low_h)
@@ -670,4 +672,7 @@
reg-xtensa.o : reg-xtensa.c $(regdef_h)
reg-xtensa.c : $(srcdir)/../regformats/reg-xtensa.dat $(regdat_sh)
$(SHELL) $(regdat_sh) $(srcdir)/../regformats/reg-xtensa.dat reg-xtensa.c
+reg-tilegx.o : reg-tilegx.c $(regdef_h)
+reg-tilegx.c : $(srcdir)/../regformats/reg-tilegx.dat $(regdat_sh)
+ $(SHELL) $(regdat_sh) $(srcdir)/../regformats/reg-tilegx.dat reg-tilegx.c
# This is the end of "Makefile.in".
^ permalink raw reply [flat|nested] 33+ messages in thread