* [Patch] Get trace file name when using 'target tfile'
@ 2013-02-13 14:38 Abid, Hafiz
2013-02-13 16:34 ` Pedro Alves
` (2 more replies)
0 siblings, 3 replies; 9+ messages in thread
From: Abid, Hafiz @ 2013-02-13 14:38 UTC (permalink / raw)
To: gdb-patches; +Cc: palves, marc.khouzam
[-- Attachment #1: Type: text/plain, Size: 1651 bytes --]
Hi All,
When using 'target tfile', commands like 'info target' and 'info files'
don't show the name of the trace file. This patch adds this
information. It also add a new field in the output of the -trace-status
command so that frontends can get this inforamtion.
This patch was originally written by Pedro. I have updated and
regtested it.
Regards,
Abid
Before:
(gdb) info target
Local trace dump file:
Looking at a trace file.
(gdb) interpreter-exec mi -trace-status
^done,supported="file",running="0",stop-reason="request",frames="7215",frames-created="7215",buffer-size="5242880",buffer-free="2833070",disconnected="0",circular="0",user-name="",notes="",start-time="0.000000",stop-time="0.000000"
After:
(gdb) info target
Local trace dump file:
`/home/abidh/trace.txt'
(gdb) interpreter-exec mi -trace-status
^done,supported="file",trace-file="/home/abidh/trace.txt",running="0",stop-reason="request",frames="7215",frames-created="7215",buffer-size="5242880",buffer-free="2833070",disconnected="0",circular="0",user-name="",notes="",start-time="0.000000",stop-time="0.000000"
2013-02-13 Pedro Alves <pedro@codesourcery.com>
Hafiz Abid Qadeer <abidh@codesourcery.com>
gdb/
* tracepoint.c (trace_status_mi): Output "trace-file" field.
(tfile_open): Record the trace file's filename in the trace
status.
(tfile_files_info): Mention the name of the trace file.
* tracepoint.h (struct trace_status) <from_file>: Make it hold
the
trace file's filename instead of a boolean.
gdb/doc/
* gdb.texinfo (GDB/MI Tracepoint Commands) <-trace-status>:
Document the "trace-file" field.
[-- Attachment #2: trace.patch --]
[-- Type: text/x-patch, Size: 2311 bytes --]
diff --git a/gdb/doc/gdb.texinfo b/gdb/doc/gdb.texinfo
index e3f336e..e8ac8c5 100644
--- a/gdb/doc/gdb.texinfo
+++ b/gdb/doc/gdb.texinfo
@@ -32094,6 +32094,10 @@ The value of the disconnected tracing flag. @code{1} means that
tracing will continue after @value{GDBN} disconnects, @code{0} means
that the trace run will stop.
+@item trace-file
+The filename of the trace file being examined. This field is
+optional, and only present when examining a trace file.
+
@end table
@subsubheading @value{GDBN} Command
diff --git a/gdb/tracepoint.c b/gdb/tracepoint.c
index b45863e..848a1b1 100644
--- a/gdb/tracepoint.c
+++ b/gdb/tracepoint.c
@@ -2094,6 +2094,9 @@ trace_status_mi (int on_stop)
else if (!on_stop)
ui_out_field_string (uiout, "supported", "1");
+ if (ts->from_file)
+ ui_out_field_string (uiout, "trace-file", ts->from_file);
+
gdb_assert (ts->running_known);
if (ts->running)
@@ -3745,8 +3748,8 @@ tfile_open (char *filename, int from_tty)
trace_regblock_size = 0;
ts = current_trace_status ();
- /* We know we're working with a file. */
- ts->from_file = 1;
+ /* We know we're working with a file. Record its name. */
+ ts->from_file = trace_filename;
/* Set defaults in case there is no status line. */
ts->running_known = 0;
ts->stop_reason = trace_stop_reason_unknown;
@@ -4196,8 +4199,7 @@ tfile_close (int quitting)
static void
tfile_files_info (struct target_ops *t)
{
- /* (it would be useful to mention the name of the file). */
- printf_filtered ("Looking at a trace file.\n");
+ printf_filtered ("\t`%s'\n", trace_filename);
}
/* The trace status for a file is that tracing can never be run. */
diff --git a/gdb/tracepoint.h b/gdb/tracepoint.h
index 2e1d83a..f407046 100644
--- a/gdb/tracepoint.h
+++ b/gdb/tracepoint.h
@@ -72,9 +72,9 @@ enum trace_stop_reason
struct trace_status
{
- /* This is true if the status is coming from a file rather
- than a live target. */
- int from_file;
+ /* If the status is coming from a file rather than a live target,
+ this points at the file's filename. Otherwise, this is NULL. */
+ const char *from_file;
/* This is true if the value of the running field is known. */
int running_known;
^ permalink raw reply [flat|nested] 9+ messages in thread
* Re: [Patch] Get trace file name when using 'target tfile'
2013-02-13 14:38 [Patch] Get trace file name when using 'target tfile' Abid, Hafiz
@ 2013-02-13 16:34 ` Pedro Alves
2013-02-13 17:59 ` Eli Zaretskii
2013-02-14 3:17 ` Yao Qi
2 siblings, 0 replies; 9+ messages in thread
From: Pedro Alves @ 2013-02-13 16:34 UTC (permalink / raw)
To: Abid, Hafiz; +Cc: gdb-patches, marc.khouzam
On 02/13/2013 02:38 PM, Abid, Hafiz wrote:
> diff --git a/gdb/doc/gdb.texinfo b/gdb/doc/gdb.texinfo
> index e3f336e..e8ac8c5 100644
> --- a/gdb/doc/gdb.texinfo
> +++ b/gdb/doc/gdb.texinfo
> @@ -32094,6 +32094,10 @@ The value of the disconnected tracing flag. @code{1} means that
> tracing will continue after @value{GDBN} disconnects, @code{0} means
> that the trace run will stop.
>
> +@item trace-file
> +The filename of the trace file being examined. This field is
> +optional, and only present when examining a trace file.
The docs bits need Eli's approval. Obviously it looks
good to me. :-) Though, since this adds an MI attribute, it
should have a corresponding NEWS entry too.
I'd be good to tweak the MI tfile tests to check this new field.
Can you do that please?
> + if (ts->from_file)
if (ts->from_file != NULL)
> + ui_out_field_string (uiout, "trace-file", ts->from_file);
> + /* We know we're working with a file. Record its name. */
Double space. ----------------------------^
Otherwise this is OK.
--
Pedro Alves
^ permalink raw reply [flat|nested] 9+ messages in thread
* Re: [Patch] Get trace file name when using 'target tfile'
2013-02-13 14:38 [Patch] Get trace file name when using 'target tfile' Abid, Hafiz
2013-02-13 16:34 ` Pedro Alves
@ 2013-02-13 17:59 ` Eli Zaretskii
2013-02-14 3:17 ` Yao Qi
2 siblings, 0 replies; 9+ messages in thread
From: Eli Zaretskii @ 2013-02-13 17:59 UTC (permalink / raw)
To: Abid, Hafiz; +Cc: gdb-patches, palves, marc.khouzam
> Date: Wed, 13 Feb 2013 14:38:18 +0000
> From: "Abid, Hafiz" <hafiz_abid@mentor.com>
> CC: <palves@redhat.com>, <marc.khouzam@ericsson.com>
>
> --- a/gdb/doc/gdb.texinfo
> +++ b/gdb/doc/gdb.texinfo
> @@ -32094,6 +32094,10 @@ The value of the disconnected tracing flag. @code{1} means that
> tracing will continue after @value{GDBN} disconnects, @code{0} means
> that the trace run will stop.
>
> +@item trace-file
> +The filename of the trace file being examined. This field is
> +optional, and only present when examining a trace file.
> +
This part is OK. Thanks.
^ permalink raw reply [flat|nested] 9+ messages in thread
* Re: [Patch] Get trace file name when using 'target tfile'
2013-02-13 14:38 [Patch] Get trace file name when using 'target tfile' Abid, Hafiz
2013-02-13 16:34 ` Pedro Alves
2013-02-13 17:59 ` Eli Zaretskii
@ 2013-02-14 3:17 ` Yao Qi
2013-02-14 14:34 ` Pedro Alves
2 siblings, 1 reply; 9+ messages in thread
From: Yao Qi @ 2013-02-14 3:17 UTC (permalink / raw)
To: Abid, Hafiz; +Cc: gdb-patches, palves, marc.khouzam
On 02/13/2013 10:38 PM, Abid, Hafiz wrote:
> - /* This is true if the status is coming from a file rather
> - than a live target. */
> - int from_file;
> + /* If the status is coming from a file rather than a live target,
> + this points at the file's filename. Otherwise, this is NULL. */
> + const char *from_file;
How about rename this field to "trace_filename", or something similar?
"from_file" is fine as a boolean, but is confusing as a the name of
trace file.
--
Yao (é½å°§)
^ permalink raw reply [flat|nested] 9+ messages in thread
* Re: [Patch] Get trace file name when using 'target tfile'
2013-02-14 3:17 ` Yao Qi
@ 2013-02-14 14:34 ` Pedro Alves
2013-02-14 15:49 ` Abid, Hafiz
0 siblings, 1 reply; 9+ messages in thread
From: Pedro Alves @ 2013-02-14 14:34 UTC (permalink / raw)
To: Yao Qi; +Cc: Abid, Hafiz, gdb-patches, marc.khouzam
On 02/14/2013 03:16 AM, Yao Qi wrote:
> On 02/13/2013 10:38 PM, Abid, Hafiz wrote:
>> - /* This is true if the status is coming from a file rather
>> - than a live target. */
>> - int from_file;
>> + /* If the status is coming from a file rather than a live target,
>> + this points at the file's filename. Otherwise, this is NULL. */
>> + const char *from_file;
>
> How about rename this field to "trace_filename", or something similar? "from_file" is fine as a boolean, but is confusing as a the name of trace file.
Fine with me. I'd drop the "trace_" bit as being redundant
with "struct trace_status".
--
Pedro Alves
^ permalink raw reply [flat|nested] 9+ messages in thread
* Re: [Patch] Get trace file name when using 'target tfile'
2013-02-14 14:34 ` Pedro Alves
@ 2013-02-14 15:49 ` Abid, Hafiz
2013-02-14 15:57 ` Pedro Alves
2013-02-14 22:02 ` Eli Zaretskii
0 siblings, 2 replies; 9+ messages in thread
From: Abid, Hafiz @ 2013-02-14 15:49 UTC (permalink / raw)
To: Pedro Alves, eliz; +Cc: Yao Qi, gdb-patches, marc.khouzam
[-- Attachment #1: Type: text/plain, Size: 2182 bytes --]
On 14/02/13 14:34:15, Pedro Alves wrote:
> On 02/14/2013 03:16 AM, Yao Qi wrote:
> > On 02/13/2013 10:38 PM, Abid, Hafiz wrote:
> >> - /* This is true if the status is coming from a file rather
> >> - than a live target. */
> >> - int from_file;
> >> + /* If the status is coming from a file rather than a live
> target,
> >> + this points at the file's filename. Otherwise, this is
> NULL. */
> >> + const char *from_file;
> >
> > How about rename this field to "trace_filename", or something
> similar? "from_file" is fine as a boolean, but is confusing as a the
> name of trace file.
>
> Fine with me. I'd drop the "trace_" bit as being redundant
> with "struct trace_status".
>
> --
> Pedro Alves
>
>
Hi,
Thanks everybody for review. The updated patch is attached. The changes
from the previous version are.
1. Renamed "from_file" field to "filename". Use explicit NULL(or
non-NULL) check against it.
2. Added a test case for -trace-struct command.
3. Added NEWS entry.
How does it look?
Regards,
Abid
2013-02-14 Pedro Alves <pedro@codesourcery.com>
Hafiz Abid Qadeer <abidh@codesourcery.com>
gdb/
* NEWS: Mention new field "trace-file".
* tracepoint.c (trace_status_mi): Output "trace-file" field.
(tfile_open): Record the trace file's filename in the trace
status.
(tfile_files_info): Mention the name of the trace file.
Check the "filename" field explicitely.
(trace_status_command): Explicitely check "filename" field.
(trace_find_command): Ditto.
(trace_find_pc_command): Ditto.
(trace_find_tracepoint_command): Ditto.
(trace_find_line_command): Ditto.
(trace_find_range_command): Ditto.
(trace_find_outside_command): Ditto.
* tracepoint.h (struct trace_status) <from_file>: Rename it
to "filename" and make it hold the trace file's filename
instead of a boolean.
* remote.c (remote_get_trace_status): Initialize "filename"
field with NULL instead of 0.
gdb/doc/
* gdb.texinfo (GDB/MI Tracepoint Commands) <-trace-status>:
Document the "trace-file" field.
gdb/testsuite/
* gdb.trace/tfile.exp: Add test for -trace-status command.
[-- Attachment #2: trace_v2.patch --]
[-- Type: text/x-patch, Size: 7220 bytes --]
diff --git a/gdb/NEWS b/gdb/NEWS
index 38b36c2..13c7b76 100644
--- a/gdb/NEWS
+++ b/gdb/NEWS
@@ -150,6 +150,9 @@ show filename-display
** The response to breakpoint commands and breakpoint async records
includes an "installed" field containing a boolean state about each
non-pending tracepoint location is whether installed on target or not.
+ ** Output of the "-trace-status" command includes a "trace-file" field
+ containing the name of the trace file being examined. This field is
+ optional, and only present when examining a trace file.
* GDB now supports the "mini debuginfo" section, .gnu_debugdata.
You must have the LZMA library available when configuring GDB for this
diff --git a/gdb/doc/gdb.texinfo b/gdb/doc/gdb.texinfo
index e3f336e..e8ac8c5 100644
--- a/gdb/doc/gdb.texinfo
+++ b/gdb/doc/gdb.texinfo
@@ -32094,6 +32094,10 @@ The value of the disconnected tracing flag. @code{1} means that
tracing will continue after @value{GDBN} disconnects, @code{0} means
that the trace run will stop.
+@item trace-file
+The filename of the trace file being examined. This field is
+optional, and only present when examining a trace file.
+
@end table
@subsubheading @value{GDBN} Command
diff --git a/gdb/remote.c b/gdb/remote.c
index 18fe61d..1e42847 100644
--- a/gdb/remote.c
+++ b/gdb/remote.c
@@ -10701,7 +10701,7 @@ remote_get_trace_status (struct trace_status *ts)
return -1;
/* We're working with a live target. */
- ts->from_file = 0;
+ ts->filename = NULL;
if (*p++ != 'T')
error (_("Bogus trace status reply from target: %s"), target_buf);
diff --git a/gdb/testsuite/gdb.trace/tfile.exp b/gdb/testsuite/gdb.trace/tfile.exp
index b07be75..2bdde37 100644
--- a/gdb/testsuite/gdb.trace/tfile.exp
+++ b/gdb/testsuite/gdb.trace/tfile.exp
@@ -106,3 +106,7 @@ Not looking at any trace frame.*" \
gdb_test \
"interpreter-exec mi \"-target-select tfile basic.tf\"" \
"\\^connected.*"
+
+gdb_test "interpreter-exec mi \"-trace-status\"" \
+ "\\^done,supported=\"file\",trace-file=\".*basic.tf\",running=\"0\",stop-reason=\"request\",frames=\"${decimal}\",frames-created=\"${decimal}\",buffer-size=\"${decimal}\",buffer-free=\"${decimal}\",disconnected=\".*\",circular=\".*\",user-name=\"\",notes=\"\",start-time=\".*\",stop-time=\".*\"" \
+ "-trace-status"
diff --git a/gdb/tracepoint.c b/gdb/tracepoint.c
index b45863e..ada0a21 100644
--- a/gdb/tracepoint.c
+++ b/gdb/tracepoint.c
@@ -1923,7 +1923,7 @@ trace_status_command (char *args, int from_tty)
if (status == -1)
{
- if (ts->from_file)
+ if (ts->filename != NULL)
printf_filtered (_("Using a trace file.\n"));
else
{
@@ -2083,17 +2083,20 @@ trace_status_mi (int on_stop)
status = target_get_trace_status (ts);
- if (status == -1 && !ts->from_file)
+ if (status == -1 && ts->filename == NULL)
{
ui_out_field_string (uiout, "supported", "0");
return;
}
- if (ts->from_file)
+ if (ts->filename != NULL)
ui_out_field_string (uiout, "supported", "file");
else if (!on_stop)
ui_out_field_string (uiout, "supported", "1");
+ if (ts->filename != NULL)
+ ui_out_field_string (uiout, "trace-file", ts->filename);
+
gdb_assert (ts->running_known);
if (ts->running)
@@ -2382,7 +2385,8 @@ trace_find_command (char *args, int from_tty)
{ /* This should only be called with a numeric argument. */
int frameno = -1;
- if (current_trace_status ()->running && !current_trace_status ()->from_file)
+ if (current_trace_status ()->running
+ && current_trace_status ()->filename == NULL)
error (_("May not look at trace frames while trace is running."));
if (args == 0 || *args == 0)
@@ -2433,7 +2437,8 @@ trace_find_pc_command (char *args, int from_tty)
{
CORE_ADDR pc;
- if (current_trace_status ()->running && !current_trace_status ()->from_file)
+ if (current_trace_status ()->running
+ && current_trace_status ()->filename == NULL)
error (_("May not look at trace frames while trace is running."));
if (args == 0 || *args == 0)
@@ -2451,7 +2456,8 @@ trace_find_tracepoint_command (char *args, int from_tty)
int tdp;
struct tracepoint *tp;
- if (current_trace_status ()->running && !current_trace_status ()->from_file)
+ if (current_trace_status ()->running
+ && current_trace_status ()->filename == NULL)
error (_("May not look at trace frames while trace is running."));
if (args == 0 || *args == 0)
@@ -2490,7 +2496,8 @@ trace_find_line_command (char *args, int from_tty)
struct symtab_and_line sal;
struct cleanup *old_chain;
- if (current_trace_status ()->running && !current_trace_status ()->from_file)
+ if (current_trace_status ()->running
+ && current_trace_status ()->filename == NULL)
error (_("May not look at trace frames while trace is running."));
if (args == 0 || *args == 0)
@@ -2555,7 +2562,8 @@ trace_find_range_command (char *args, int from_tty)
static CORE_ADDR start, stop;
char *tmp;
- if (current_trace_status ()->running && !current_trace_status ()->from_file)
+ if (current_trace_status ()->running
+ && current_trace_status ()->filename == NULL)
error (_("May not look at trace frames while trace is running."));
if (args == 0 || *args == 0)
@@ -2588,7 +2596,8 @@ trace_find_outside_command (char *args, int from_tty)
CORE_ADDR start, stop;
char *tmp;
- if (current_trace_status ()->running && !current_trace_status ()->from_file)
+ if (current_trace_status ()->running
+ && current_trace_status ()->filename == NULL)
error (_("May not look at trace frames while trace is running."));
if (args == 0 || *args == 0)
@@ -3745,8 +3754,8 @@ tfile_open (char *filename, int from_tty)
trace_regblock_size = 0;
ts = current_trace_status ();
- /* We know we're working with a file. */
- ts->from_file = 1;
+ /* We know we're working with a file. Record its name. */
+ ts->filename = trace_filename;
/* Set defaults in case there is no status line. */
ts->running_known = 0;
ts->stop_reason = trace_stop_reason_unknown;
@@ -4196,8 +4205,7 @@ tfile_close (int quitting)
static void
tfile_files_info (struct target_ops *t)
{
- /* (it would be useful to mention the name of the file). */
- printf_filtered ("Looking at a trace file.\n");
+ printf_filtered ("\t`%s'\n", trace_filename);
}
/* The trace status for a file is that tracing can never be run. */
diff --git a/gdb/tracepoint.h b/gdb/tracepoint.h
index 2e1d83a..b6c698c 100644
--- a/gdb/tracepoint.h
+++ b/gdb/tracepoint.h
@@ -72,9 +72,9 @@ enum trace_stop_reason
struct trace_status
{
- /* This is true if the status is coming from a file rather
- than a live target. */
- int from_file;
+ /* If the status is coming from a file rather than a live target,
+ this points at the file's filename. Otherwise, this is NULL. */
+ const char *filename;
/* This is true if the value of the running field is known. */
int running_known;
^ permalink raw reply [flat|nested] 9+ messages in thread
* Re: [Patch] Get trace file name when using 'target tfile'
2013-02-14 15:49 ` Abid, Hafiz
@ 2013-02-14 15:57 ` Pedro Alves
2013-02-14 22:02 ` Eli Zaretskii
1 sibling, 0 replies; 9+ messages in thread
From: Pedro Alves @ 2013-02-14 15:57 UTC (permalink / raw)
To: Abid, Hafiz; +Cc: eliz, Yao Qi, gdb-patches, marc.khouzam
On 02/14/2013 03:49 PM, Abid, Hafiz wrote:
> Thanks everybody for review. The updated patch is attached. The changes from the previous version are.
>
> 1. Renamed "from_file" field to "filename". Use explicit NULL(or non-NULL) check against it.
> 2. Added a test case for -trace-struct command.
> 3. Added NEWS entry.
>
> How does it look?
Thanks. The code bits looks good to me.
Eli should review the new NEWS bit.
> * remote.c (remote_get_trace_status): Initialize "filename"
> field with NULL instead of 0.
^^^^
Something weird with spaces here.
--
Pedro Alves
^ permalink raw reply [flat|nested] 9+ messages in thread
* Re: [Patch] Get trace file name when using 'target tfile'
2013-02-14 15:49 ` Abid, Hafiz
2013-02-14 15:57 ` Pedro Alves
@ 2013-02-14 22:02 ` Eli Zaretskii
2013-02-15 10:15 ` Abid, Hafiz
1 sibling, 1 reply; 9+ messages in thread
From: Eli Zaretskii @ 2013-02-14 22:02 UTC (permalink / raw)
To: Abid, Hafiz; +Cc: palves, yao, gdb-patches, marc.khouzam
> Date: Thu, 14 Feb 2013 15:49:30 +0000
> From: "Abid, Hafiz" <hafiz_abid@mentor.com>
> CC: Yao Qi <yao@codesourcery.com>, <gdb-patches@sourceware.org>,
> <marc.khouzam@ericsson.com>
>
> 1. Renamed "from_file" field to "filename". Use explicit NULL(or
> non-NULL) check against it.
> 2. Added a test case for -trace-struct command.
> 3. Added NEWS entry.
>
> How does it look?
OK, but:
> --- a/gdb/NEWS
> +++ b/gdb/NEWS
> @@ -150,6 +150,9 @@ show filename-display
> ** The response to breakpoint commands and breakpoint async records
> includes an "installed" field containing a boolean state about each
> non-pending tracepoint location is whether installed on target or not.
> + ** Output of the "-trace-status" command includes a "trace-file" field
> + containing the name of the trace file being examined. This field is
^^
Two spaces between sentences, please.
The documentation parts are OK with that change. Thanks.
^ permalink raw reply [flat|nested] 9+ messages in thread
* Re: [Patch] Get trace file name when using 'target tfile'
2013-02-14 22:02 ` Eli Zaretskii
@ 2013-02-15 10:15 ` Abid, Hafiz
0 siblings, 0 replies; 9+ messages in thread
From: Abid, Hafiz @ 2013-02-15 10:15 UTC (permalink / raw)
To: Eli Zaretskii; +Cc: palves, yao, gdb-patches, marc.khouzam
On 14/02/13 22:02:13, Eli Zaretskii wrote:
> > Date: Thu, 14 Feb 2013 15:49:30 +0000
> > From: "Abid, Hafiz" <hafiz_abid@mentor.com>
> > CC: Yao Qi <yao@codesourcery.com>, <gdb-patches@sourceware.org>,
> > <marc.khouzam@ericsson.com>
> >
> > 1. Renamed "from_file" field to "filename". Use explicit NULL(or
> > non-NULL) check against it.
> > 2. Added a test case for -trace-struct command.
> > 3. Added NEWS entry.
> >
> > How does it look?
>
> OK, but:
>
> > --- a/gdb/NEWS
> > +++ b/gdb/NEWS
> > @@ -150,6 +150,9 @@ show filename-display
> > ** The response to breakpoint commands and breakpoint async
> records
> > includes an "installed" field containing a boolean state
> about each
> > non-pending tracepoint location is whether installed on
> target or not.
> > + ** Output of the "-trace-status" command includes a "trace-file"
> field
> > + containing the name of the trace file being examined. This
> field is
> ^^
> Two spaces between sentences, please.
>
> The documentation parts are OK with that change. Thanks.
>
Thanks Eli and Pedro for review. I committed after making the change
suggested by Eli.
Regards,
Abid
^ permalink raw reply [flat|nested] 9+ messages in thread
end of thread, other threads:[~2013-02-15 10:15 UTC | newest]
Thread overview: 9+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2013-02-13 14:38 [Patch] Get trace file name when using 'target tfile' Abid, Hafiz
2013-02-13 16:34 ` Pedro Alves
2013-02-13 17:59 ` Eli Zaretskii
2013-02-14 3:17 ` Yao Qi
2013-02-14 14:34 ` Pedro Alves
2013-02-14 15:49 ` Abid, Hafiz
2013-02-14 15:57 ` Pedro Alves
2013-02-14 22:02 ` Eli Zaretskii
2013-02-15 10:15 ` Abid, Hafiz
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox