* [PATCH v3 03/14] sim/erc32: Switched emulated memory to host endian order.
2015-03-01 21:10 [PATCH v3 00/14] Update of the SPARC SIS simulator Jiri Gaisler
@ 2015-03-01 21:10 ` Jiri Gaisler
2015-03-02 1:13 ` Mike Frysinger
2015-03-01 21:10 ` [PATCH v3 06/14] sim/erc32: Fix a few compiler warnings Jiri Gaisler
` (12 subsequent siblings)
13 siblings, 1 reply; 34+ messages in thread
From: Jiri Gaisler @ 2015-03-01 21:10 UTC (permalink / raw)
To: gdb-patches; +Cc: Jiri Gaisler
Change data ordering in emulated memory from target order (big endian)
to host order. Improves performance and simplifies most memory
operations. Requires some byte twisting during stores on little
endian hosts (intel).
* erc32.c (fetch_bytes) Remove. (store_bytes) Remove byte twisting.
(memory_read) Access memory directly. (extract_short,
extract_short_signed, extract_byte, extract_byte_signed) New
function for for sub-word LD instructions.
* func.c (disp_ctrl, dis_mem) Ajust print-out to new data endian.
* interf.c (sim_open) Convert endian when gdb writes to memory.
---
sim/erc32/erc32.c | 166 ++++++++++++-----------------------------------------
sim/erc32/exec.c | 60 +++++++++++++++----
sim/erc32/func.c | 41 ++++++++-----
sim/erc32/interf.c | 29 ++++++++++
sim/erc32/sis.c | 4 ++
5 files changed, 147 insertions(+), 153 deletions(-)
diff --git a/sim/erc32/erc32.c b/sim/erc32/erc32.c
index 428d6c4..18913dd 100644
--- a/sim/erc32/erc32.c
+++ b/sim/erc32/erc32.c
@@ -297,11 +297,8 @@ static void gpt_reload_set (uint32 val);
static void timer_ctrl (uint32 val);
static unsigned char *
get_mem_ptr (uint32 addr, uint32 size);
-
-static void fetch_bytes (int asi, unsigned char *mem,
- uint32 *data, int sz);
-
-static void store_bytes (unsigned char *mem, uint32 *data, int sz);
+static void store_bytes (unsigned char *mem, uint32 waddr,
+ uint32 *data, int sz, int32 *ws);
extern int ext_irl;
@@ -1525,123 +1522,43 @@ timer_ctrl(val)
gpt_start();
}
-
-/* Retrieve data from target memory. MEM points to location from which
- to read the data; DATA points to words where retrieved data will be
- stored in host byte order. SZ contains log(2) of the number of bytes
- to retrieve, and can be 0 (1 byte), 1 (one half-word), 2 (one word),
- or 3 (two words). */
+/* Store data in host byte order. MEM points to the beginning of the
+ emulated memory; WADDR contains the index the emulated memory,
+ DATA points to words in host byte order to be stored. SZ contains log(2)
+ of the number of bytes to retrieve, and can be 0 (1 byte), 1 (one half-word),
+ 2 (one word), or 3 (two words); WS should return the number of wait-states. */
static void
-fetch_bytes (asi, mem, data, sz)
- int asi;
+store_bytes (mem, waddr, data, sz, ws)
unsigned char *mem;
+ uint32 waddr;
uint32 *data;
- int sz;
+ int32 sz;
+ int32 *ws;
{
- if (CURRENT_TARGET_BYTE_ORDER == BIG_ENDIAN
- || asi == 8 || asi == 9) {
- switch (sz) {
- case 3:
- data[1] = (((uint32) mem[7]) & 0xff) |
- ((((uint32) mem[6]) & 0xff) << 8) |
- ((((uint32) mem[5]) & 0xff) << 16) |
- ((((uint32) mem[4]) & 0xff) << 24);
- /* Fall through to 2 */
- case 2:
- data[0] = (((uint32) mem[3]) & 0xff) |
- ((((uint32) mem[2]) & 0xff) << 8) |
- ((((uint32) mem[1]) & 0xff) << 16) |
- ((((uint32) mem[0]) & 0xff) << 24);
- break;
- case 1:
- data[0] = (((uint32) mem[1]) & 0xff) |
- ((((uint32) mem[0]) & 0xff) << 8);
- break;
+ switch (sz) {
case 0:
- data[0] = mem[0] & 0xff;
- break;
-
- }
- } else {
- switch (sz) {
- case 3:
- data[1] = ((((uint32) mem[7]) & 0xff) << 24) |
- ((((uint32) mem[6]) & 0xff) << 16) |
- ((((uint32) mem[5]) & 0xff) << 8) |
- (((uint32) mem[4]) & 0xff);
- /* Fall through to 4 */
- case 2:
- data[0] = ((((uint32) mem[3]) & 0xff) << 24) |
- ((((uint32) mem[2]) & 0xff) << 16) |
- ((((uint32) mem[1]) & 0xff) << 8) |
- (((uint32) mem[0]) & 0xff);
+#ifdef HOST_LITTLE_ENDIAN
+ waddr ^= 3;
+#endif
+ mem[waddr] = *data & 0x0ff;
+ *ws = mem_ramw_ws + 3;
break;
case 1:
- data[0] = ((((uint32) mem[1]) & 0xff) << 8) |
- (((uint32) mem[0]) & 0xff);
- break;
- case 0:
- data[0] = mem[0] & 0xff;
+#ifdef HOST_LITTLE_ENDIAN
+ waddr ^= 2;
+#endif
+ memcpy(&mem[waddr], data, 2);
+ *ws = mem_ramw_ws + 3;
break;
- }
- }
-}
-
-
-/* Store data in target byte order. MEM points to location to store data;
- DATA points to words in host byte order to be stored. SZ contains log(2)
- of the number of bytes to retrieve, and can be 0 (1 byte), 1 (one half-word),
- 2 (one word), or 3 (two words). */
-
-static void
-store_bytes (mem, data, sz)
- unsigned char *mem;
- uint32 *data;
- int sz;
-{
- if (CURRENT_TARGET_BYTE_ORDER == LITTLE_ENDIAN) {
- switch (sz) {
- case 3:
- mem[7] = (data[1] >> 24) & 0xff;
- mem[6] = (data[1] >> 16) & 0xff;
- mem[5] = (data[1] >> 8) & 0xff;
- mem[4] = data[1] & 0xff;
- /* Fall through to 2 */
case 2:
- mem[3] = (data[0] >> 24) & 0xff;
- mem[2] = (data[0] >> 16) & 0xff;
- /* Fall through to 1 */
- case 1:
- mem[1] = (data[0] >> 8) & 0xff;
- /* Fall through to 0 */
- case 0:
- mem[0] = data[0] & 0xff;
+ memcpy(&mem[waddr], data, 4);
+ *ws = mem_ramw_ws;
break;
- }
- } else {
- switch (sz) {
case 3:
- mem[7] = data[1] & 0xff;
- mem[6] = (data[1] >> 8) & 0xff;
- mem[5] = (data[1] >> 16) & 0xff;
- mem[4] = (data[1] >> 24) & 0xff;
- /* Fall through to 2 */
- case 2:
- mem[3] = data[0] & 0xff;
- mem[2] = (data[0] >> 8) & 0xff;
- mem[1] = (data[0] >> 16) & 0xff;
- mem[0] = (data[0] >> 24) & 0xff;
- break;
- case 1:
- mem[1] = data[0] & 0xff;
- mem[0] = (data[0] >> 8) & 0xff;
- break;
- case 0:
- mem[0] = data[0] & 0xff;
+ memcpy(&mem[waddr], data, 8);
+ *ws = 2 * mem_ramw_ws + STD_WS;
break;
-
- }
}
}
@@ -1671,7 +1588,7 @@ memory_read(asi, addr, data, sz, ws)
#endif
if ((addr >= mem_ramstart) && (addr < (mem_ramstart + mem_ramsz))) {
- fetch_bytes (asi, &ramb[addr & mem_rammask], data, sz);
+ *data = *((uint32 *) & (ramb[addr & mem_rammask & ~3]));
*ws = mem_ramr_ws;
return (0);
} else if ((addr >= MEC_START) && (addr < MEC_END)) {
@@ -1689,7 +1606,7 @@ memory_read(asi, addr, data, sz, ws)
} else if (era) {
if ((addr < 0x100000) ||
((addr>= 0x80000000) && (addr < 0x80100000))) {
- fetch_bytes (asi, &romb[addr & ROM_MASK], data, sz);
+ *data = *((uint32 *) & (romb[addr & ROM_MASK & ~3]));
*ws = 4;
return (0);
} else if ((addr >= 0x10000000) &&
@@ -1700,13 +1617,13 @@ memory_read(asi, addr, data, sz, ws)
}
} else if (addr < mem_romsz) {
- fetch_bytes (asi, &romb[addr], data, sz);
+ *data = *((uint32 *) & (romb[addr & ~3]));
*ws = mem_romr_ws;
return (0);
#else
} else if (addr < mem_romsz) {
- fetch_bytes (asi, &romb[addr], data, sz);
+ *data = *((uint32 *) & (romb[addr & ~3]));
*ws = mem_romr_ws;
return (0);
#endif
@@ -1769,21 +1686,10 @@ memory_write(asi, addr, data, sz, ws)
}
}
- store_bytes (&ramb[addr & mem_rammask], data, sz);
-
- switch (sz) {
- case 0:
- case 1:
- *ws = mem_ramw_ws + 3;
- break;
- case 2:
- *ws = mem_ramw_ws;
- break;
- case 3:
- *ws = 2 * mem_ramw_ws + STD_WS;
- break;
- }
+ waddr = addr & mem_rammask;
+ store_bytes (ramb, waddr, data, sz, ws);
return (0);
+
} else if ((addr >= MEC_START) && (addr < MEC_END)) {
if ((sz != 2) || (asi != 0xb)) {
set_sfsr(MEC_ACC, addr, asi, 0);
@@ -1806,7 +1712,7 @@ memory_write(asi, addr, data, sz, ws)
((addr < 0x100000) || ((addr >= 0x80000000) && (addr < 0x80100000)))) {
addr &= ROM_MASK;
*ws = sz == 3 ? 8 : 4;
- store_bytes (&romb[addr], data, sz);
+ store_bytes (romb, addr, data, sz, ws);
return (0);
} else if ((addr >= 0x10000000) &&
(addr < (0x10000000 + (512 << (mec_iocr & 0x0f)))) &&
@@ -1822,7 +1728,7 @@ memory_write(asi, addr, data, sz, ws)
*ws = mem_romw_ws + 1;
if (sz == 3)
*ws += mem_romw_ws + STD_WS;
- store_bytes (&romb[addr], data, sz);
+ store_bytes (romb, addr, data, sz, ws);
return (0);
#else
@@ -1833,7 +1739,7 @@ memory_write(asi, addr, data, sz, ws)
*ws = mem_romw_ws + 1;
if (sz == 3)
*ws += mem_romw_ws + STD_WS;
- store_bytes (&romb[addr], data, sz);
+ store_bytes (romb, addr, data, sz, ws);
return (0);
#endif
diff --git a/sim/erc32/exec.c b/sim/erc32/exec.c
index 07f3586..68c77c6 100644
--- a/sim/erc32/exec.c
+++ b/sim/erc32/exec.c
@@ -371,8 +371,38 @@ div64 (uint32 n1_hi, uint32 n1_low, uint32 n2, uint32 *result, int msigned)
}
+static int
+extract_short (uint32 data, uint32 address)
+{
+ return((data >> ((2 - (address & 2)) * 8)) & 0xffff);
+}
+
+static int
+extract_short_signed (uint32 data, uint32 address)
+{
+ uint32 tmp;
+ tmp = ((data >> ((2 - (address & 2)) * 8)) & 0xffff);
+ if (tmp & 0x8000) tmp |= 0xffff0000;
+ return(tmp);
+}
+
+static int
+extract_byte (uint32 data, uint32 address)
+{
+ return((data >> ((3 - (address & 3)) * 8)) & 0xff);
+}
+
+static int
+extract_byte_signed (uint32 data, uint32 address)
+{
+ uint32 tmp;
+ tmp = ((data >> ((3 - (address & 3)) * 8)) & 0xff);
+ if (tmp & 0x80) tmp |= 0xffffff00;
+ return(tmp);
+}
+
int
-dispatch_instruction(sregs)
+dispatch_instruction (sregs)
struct pstate *sregs;
{
@@ -1078,7 +1108,8 @@ dispatch_instruction(sregs)
sregs->trap = TRAP_PRIVI;
break;
}
- sregs->psr = (rs1 ^ operand2) & 0x00f03fff;
+ sregs->psr = (sregs->psr & 0xff000000) |
+ (rs1 ^ operand2) & 0x00f03fff;
break;
case WRWIM:
if (!(sregs->psr & PSR_S)) {
@@ -1214,8 +1245,10 @@ dispatch_instruction(sregs)
else
rdd = &(sregs->g[rd]);
}
- mexc = memory_read(asi, address, ddata, 3, &ws);
- sregs->hold += ws * 2;
+ mexc = memory_read(asi, address, ddata, 2, &ws);
+ sregs->hold += ws;
+ mexc |= memory_read(asi, address+4, &ddata[1], 2, &ws);
+ sregs->hold += ws;
sregs->icnt = T_LDD;
if (mexc) {
sregs->trap = TRAP_DEXC;
@@ -1253,6 +1286,7 @@ dispatch_instruction(sregs)
sregs->trap = TRAP_DEXC;
break;
}
+ data = extract_byte(data, address);
*rdd = data;
data = 0x0ff;
mexc = memory_write(asi, address, &data, 0, &ws);
@@ -1275,8 +1309,10 @@ dispatch_instruction(sregs)
sregs->trap = TRAP_DEXC;
break;
}
- if ((op3 == LDSB) && (data & 0x80))
- data |= 0xffffff00;
+ if (op3 == LDSB)
+ data = extract_byte_signed(data, address);
+ else
+ data = extract_byte(data, address);
*rdd = data;
break;
case LDSHA:
@@ -1294,8 +1330,10 @@ dispatch_instruction(sregs)
sregs->trap = TRAP_DEXC;
break;
}
- if ((op3 == LDSH) && (data & 0x8000))
- data |= 0xffff0000;
+ if (op3 == LDSH)
+ data = extract_short_signed(data, address);
+ else
+ data = extract_short(data, address);
*rdd = data;
break;
case LDF:
@@ -1338,8 +1376,10 @@ dispatch_instruction(sregs)
((sregs->frs2 >> 1) == (rd >> 1)))
sregs->fhold += (sregs->ftime - ebase.simtime);
}
- mexc = memory_read(asi, address, ddata, 3, &ws);
- sregs->hold += ws * 2;
+ mexc = memory_read(asi, address, ddata, 2, &ws);
+ sregs->hold += ws;
+ mexc |= memory_read(asi, address+4, &ddata[1], 2, &ws);
+ sregs->hold += ws;
sregs->icnt = T_LDD;
if (mexc) {
sregs->trap = TRAP_DEXC;
diff --git a/sim/erc32/func.c b/sim/erc32/func.c
index e0037e7..9a41e0b 100644
--- a/sim/erc32/func.c
+++ b/sim/erc32/func.c
@@ -788,15 +788,15 @@ disp_ctrl(sregs)
struct pstate *sregs;
{
- unsigned char i[4];
+ uint32 i;
printf("\n psr: %08X wim: %08X tbr: %08X y: %08X\n",
sregs->psr, sregs->wim, sregs->tbr, sregs->y);
- sis_memory_read(sregs->pc, i, 4);
- printf("\n pc: %08X = %02X%02X%02X%02X ", sregs->pc,i[0],i[1],i[2],i[3]);
+ sis_memory_read(sregs->pc, (char *) &i, 4);
+ printf("\n pc: %08X = %08X ", sregs->pc, i);
print_insn_sparc_sis(sregs->pc, &dinfo);
- sis_memory_read(sregs->npc, i, 4);
- printf("\n npc: %08X = %02X%02X%02X%02X ",sregs->npc,i[0],i[1],i[2],i[3]);
+ sis_memory_read(sregs->npc, (char *) &i, 4);
+ printf("\n npc: %08X = %08X ", sregs->npc, i);
print_insn_sparc_sis(sregs->npc, &dinfo);
if (sregs->err_mode)
printf("\n IU in error mode");
@@ -810,22 +810,31 @@ disp_mem(addr, len)
{
uint32 i;
- unsigned char data[4];
+ union {
+ unsigned char u8[4];
+ uint32 u32;
+ } data;
uint32 mem[4], j;
char *p;
+ int end;
+#ifdef HOST_LITTLE_ENDIAN
+ end = 3;
+#else
+ end = 0;
+#endif
for (i = addr & ~3; i < ((addr + len) & ~3); i += 16) {
printf("\n %8X ", i);
for (j = 0; j < 4; j++) {
- sis_memory_read((i + (j * 4)), data, 4);
- printf("%02x%02x%02x%02x ", data[0],data[1],data[2],data[3]);
- mem[j] = *((int *) &data);
+ sis_memory_read((i + (j * 4)), data.u8, 4);
+ printf("%08x ", data.u32);
+ mem[j] = data.u32;
}
printf(" ");
p = (char *) mem;
for (j = 0; j < 16; j++) {
- if (isprint(p[j]))
- putchar(p[j]);
+ if (isprint(p[j^end]))
+ putchar(p[j^end]);
else
putchar('.');
}
@@ -841,10 +850,11 @@ dis_mem(addr, len, info)
{
uint32 i;
unsigned char data[4];
+ uint32 *wdata = (uint32 *) data;
for (i = addr & -3; i < ((addr & -3) + (len << 2)); i += 4) {
sis_memory_read(i, data, 4);
- printf(" %08x %02x%02x%02x%02x ", i, data[0],data[1],data[2],data[3]);
+ printf(" %08x %08x ", i, *wdata);
print_insn_sparc_sis(i, info);
if (i >= 0xfffffffc) break;
printf("\n");
@@ -1043,6 +1053,7 @@ bfd_load(fname)
asection *section;
bfd *pbfd;
const bfd_arch_info_type *arch;
+ int i;
pbfd = bfd_openr(fname, 0);
@@ -1116,13 +1127,17 @@ bfd_load(fname)
fptr = 0;
while (section_size > 0) {
- char buffer[1024];
int count;
+ char buffer[1024];
+ uint32 *wbuffer = (uint32 *) buffer;
count = min(section_size, 1024);
bfd_get_section_contents(pbfd, section, buffer, fptr, count);
+#ifdef HOST_LITTLE_ENDIAN
+ for (i = 0; i < (count / 4); i++) wbuffer[i] = ntohl(wbuffer[i]); // endian swap
+#endif
sis_memory_write(section_address, buffer, count);
section_address += count;
diff --git a/sim/erc32/interf.c b/sim/erc32/interf.c
index 608b224..0a83c4d 100644
--- a/sim/erc32/interf.c
+++ b/sim/erc32/interf.c
@@ -266,7 +266,11 @@ sim_open (kind, callback, abfd, argv)
sregs.freq = freq ? freq : 15;
termsave = fcntl(0, F_GETFL, 0);
INIT_DISASSEMBLE_INFO(dinfo, stdout,(fprintf_ftype)fprintf);
+#ifdef HOST_LITTLE_ENDIAN
+ dinfo.endian = BFD_ENDIAN_LITTLE;
+#else
dinfo.endian = BFD_ENDIAN_BIG;
+#endif
reset_all();
ebase.simtime = 0;
init_sim();
@@ -356,7 +360,19 @@ sim_write(sd, mem, buf, length)
const unsigned char *buf;
int length;
{
+#ifdef HOST_LITTLE_ENDIAN
+ int *ibufp = (int *) buf;
+ int ibuf[8192];
+ int i, len;
+
+ if (length >= 4)
+ for (i = 0; i < length; i += 4) {
+ ibuf[i] = ntohl(ibufp[i]);
+ }
+ return (sis_memory_write(mem, (char *) ibuf, length));
+#else
return (sis_memory_write(mem, buf, length));
+#endif
}
int
@@ -366,7 +382,20 @@ sim_read(sd, mem, buf, length)
unsigned char *buf;
int length;
{
+#ifdef HOST_LITTLE_ENDIAN
+ int *ibuf = (int *) buf;
+ int i, len;
+
+ len = sis_memory_read(mem, buf, length);
+ if (length >= 4)
+ for (i = 0; i < length; i += 4) {
+ *ibuf = htonl(*ibuf);
+ ibuf++;
+ }
+ return (len);
+#else
return (sis_memory_read(mem, buf, length));
+#endif
}
void
diff --git a/sim/erc32/sis.c b/sim/erc32/sis.c
index 931e3f3..dcb5ebf 100644
--- a/sim/erc32/sis.c
+++ b/sim/erc32/sis.c
@@ -227,7 +227,11 @@ main(argc, argv)
sregs.freq = freq;
INIT_DISASSEMBLE_INFO(dinfo, stdout, (fprintf_ftype) fprintf);
+#ifdef HOST_LITTLE_ENDIAN
+ dinfo.endian = BFD_ENDIAN_LITTLE;
+#else
dinfo.endian = BFD_ENDIAN_BIG;
+#endif
termsave = fcntl(0, F_GETFL, 0);
using_history();
--
1.9.1
^ permalink raw reply [flat|nested] 34+ messages in thread
* [PATCH v3 06/14] sim/erc32: Fix a few compiler warnings
2015-03-01 21:10 [PATCH v3 00/14] Update of the SPARC SIS simulator Jiri Gaisler
2015-03-01 21:10 ` [PATCH v3 03/14] sim/erc32: Switched emulated memory to host endian order Jiri Gaisler
@ 2015-03-01 21:10 ` Jiri Gaisler
2015-03-02 1:18 ` Mike Frysinger
2015-03-01 21:10 ` [PATCH v3 05/14] sim/erc32: Use memory_iread() function for instruction fetching Jiri Gaisler
` (11 subsequent siblings)
13 siblings, 1 reply; 34+ messages in thread
From: Jiri Gaisler @ 2015-03-01 21:10 UTC (permalink / raw)
To: gdb-patches; +Cc: Jiri Gaisler
* func.c Minor edits to remove compiler warnings.
* func.c, sis.h (exec_cmd) make second argument const char.
---
sim/erc32/func.c | 9 ++++++---
sim/erc32/sis.h | 3 +--
2 files changed, 7 insertions(+), 5 deletions(-)
diff --git a/sim/erc32/func.c b/sim/erc32/func.c
index 69d11fe..82c0deb 100644
--- a/sim/erc32/func.c
+++ b/sim/erc32/func.c
@@ -381,18 +381,19 @@ limcalc (freq)
int
exec_cmd(sregs, cmd)
- char *cmd;
+ const char *cmd;
struct pstate *sregs;
{
char *cmd1, *cmd2;
int32 stat;
uint32 len, i, clen, j, tmp;
static uint32 daddr = 0;
- char *cmdsave;
+ char *cmdsave, *cmdsave2 = NULL;
stat = OK;
cmdsave = strdup(cmd);
- if ((cmd1 = strtok(cmd, " \t")) != NULL) {
+ cmdsave2 = strdup(cmd);
+ if ((cmd1 = strtok(cmdsave2, " \t")) != NULL) {
clen = strlen(cmd1);
if (strncmp(cmd1, "bp", clen) == 0) {
for (i = 0; i < sregs->bptnum; i++) {
@@ -609,6 +610,8 @@ exec_cmd(sregs, cmd)
} else
printf("syntax error\n");
}
+ if (cmdsave2 != NULL)
+ free(cmdsave2);
if (cmdsave != NULL)
free(cmdsave);
return (stat);
diff --git a/sim/erc32/sis.h b/sim/erc32/sis.h
index 95c7858..742d2d8 100644
--- a/sim/erc32/sis.h
+++ b/sim/erc32/sis.h
@@ -184,7 +184,7 @@ extern struct pstate sregs;
extern void set_regi (struct pstate *sregs, int32 reg,
uint32 rval);
extern void get_regi (struct pstate *sregs, int32 reg, char *buf);
-extern int exec_cmd (struct pstate *sregs, char *cmd);
+extern int exec_cmd (struct pstate *sregs, const char *cmd);
extern void reset_stat (struct pstate *sregs);
extern void show_stat (struct pstate *sregs);
extern void init_bpt (struct pstate *sregs);
@@ -202,7 +202,6 @@ extern int check_bpt (struct pstate *sregs);
extern void reset_all (void);
extern void sys_reset (void);
extern void sys_halt (void);
-extern int bfd_load (char *fname);
extern double get_time (void);
/* exec.c */
--
1.9.1
^ permalink raw reply [flat|nested] 34+ messages in thread
* [PATCH v3 02/14] sim/erc32: Removed type mismatch compiler warnings
2015-03-01 21:10 [PATCH v3 00/14] Update of the SPARC SIS simulator Jiri Gaisler
` (2 preceding siblings ...)
2015-03-01 21:10 ` [PATCH v3 05/14] sim/erc32: Use memory_iread() function for instruction fetching Jiri Gaisler
@ 2015-03-01 21:10 ` Jiri Gaisler
2015-03-02 1:04 ` Mike Frysinger
2015-03-01 21:11 ` [PATCH v3 09/14] sim/erc32: Move local extern declarations into sis.h Jiri Gaisler
` (9 subsequent siblings)
13 siblings, 1 reply; 34+ messages in thread
From: Jiri Gaisler @ 2015-03-01 21:10 UTC (permalink / raw)
To: gdb-patches; +Cc: Jiri Gaisler
* func.c (exec_cmd) : silence compiler warnings when calling system().
(batch) : replace fgets() with getline().
---
sim/erc32/func.c | 22 ++++++++++++++--------
1 file changed, 14 insertions(+), 8 deletions(-)
diff --git a/sim/erc32/func.c b/sim/erc32/func.c
index e324b57..e0037e7 100644
--- a/sim/erc32/func.c
+++ b/sim/erc32/func.c
@@ -81,20 +81,24 @@ batch(sregs, fname)
char *fname;
{
FILE *fp;
- char lbuf[1024];
+ char *lbuf = NULL;
+ size_t len = 0;
+ ssize_t tmp;
if ((fp = fopen(fname, "r")) == NULL) {
fprintf(stderr, "couldn't open batch file %s\n", fname);
return (0);
}
while (!feof(fp)) {
- lbuf[0] = 0;
- fgets(lbuf, 1023, fp);
- if ((strlen(lbuf) > 0) && (lbuf[strlen(lbuf) - 1] == '\n'))
+ if (getline(&lbuf, &len, fp) == -1)
+ break;
+ if ((strlen(lbuf) > 0) && (lbuf[strlen(lbuf) - 1] == '\n')) {
lbuf[strlen(lbuf) - 1] = 0;
- printf("sis> %s\n", lbuf);
- exec_cmd(sregs, lbuf);
+ printf("sis> %s\n", lbuf);
+ exec_cmd(sregs, lbuf);
+ }
}
+ free(lbuf);
fclose(fp);
return (1);
}
@@ -383,7 +387,7 @@ exec_cmd(sregs, cmd)
{
char *cmd1, *cmd2;
int32 stat;
- uint32 len, i, clen, j;
+ uint32 len, i, clen, j, tmp;
static uint32 daddr = 0;
char *cmdsave;
@@ -555,7 +559,9 @@ exec_cmd(sregs, cmd)
sim_halt();
} else if (strncmp(cmd1, "shell", clen) == 0) {
if ((cmd1 = strtok(NULL, " \t\n\r")) != NULL) {
- system(&cmdsave[clen]);
+ if (system(&cmdsave[clen])) {
+ /* Silence unused return value warning. */
+ }
}
} else if (strncmp(cmd1, "step", clen) == 0) {
stat = run_sim(sregs, 1, 1);
--
1.9.1
^ permalink raw reply [flat|nested] 34+ messages in thread
* [PATCH v3 05/14] sim/erc32: Use memory_iread() function for instruction fetching.
2015-03-01 21:10 [PATCH v3 00/14] Update of the SPARC SIS simulator Jiri Gaisler
2015-03-01 21:10 ` [PATCH v3 03/14] sim/erc32: Switched emulated memory to host endian order Jiri Gaisler
2015-03-01 21:10 ` [PATCH v3 06/14] sim/erc32: Fix a few compiler warnings Jiri Gaisler
@ 2015-03-01 21:10 ` Jiri Gaisler
2015-03-02 1:15 ` Mike Frysinger
2015-03-01 21:10 ` [PATCH v3 02/14] sim/erc32: Removed type mismatch compiler warnings Jiri Gaisler
` (10 subsequent siblings)
13 siblings, 1 reply; 34+ messages in thread
From: Jiri Gaisler @ 2015-03-01 21:10 UTC (permalink / raw)
To: gdb-patches; +Cc: Jiri Gaisler
Use separate memory_iread() function for instruction fetching.
Speeds up execution and allows addition of an MMU at a later stage.
* erc32.c (memory_iread) New function to fetch instructions.
* interf.c (run_sim) Use memory_iread.
* sis.c (run_sim) As above.
---
sim/erc32/erc32.c | 24 ++++++++++++++++++++++++
sim/erc32/interf.c | 5 ++---
sim/erc32/sis.c | 8 ++------
sim/erc32/sis.h | 2 ++
4 files changed, 30 insertions(+), 9 deletions(-)
diff --git a/sim/erc32/erc32.c b/sim/erc32/erc32.c
index f33585c..4b608d8 100644
--- a/sim/erc32/erc32.c
+++ b/sim/erc32/erc32.c
@@ -1565,6 +1565,30 @@ store_bytes (mem, waddr, data, sz, ws)
/* Memory emulation */
int
+memory_iread(uint32 addr, uint32 *data, int32 *ws)
+{
+ uint32 asi;
+ if ((addr >= mem_ramstart) && (addr < (mem_ramstart + mem_ramsz))) {
+ memcpy (data, &ramb[addr & mem_rammask & ~3], 4);
+ *ws = mem_ramr_ws;
+ return (0);
+ } else if (addr < mem_romsz) {
+ memcpy (data, &romb[addr & ~3], 4);
+ *ws = mem_romr_ws;
+ return (0);
+ }
+
+ printf("Memory exception at %x (illegal address)\n", addr);
+ if (sregs.psr & 0x080)
+ asi = 9;
+ else
+ asi = 8;
+ set_sfsr (UIMP_ACC, addr, asi, 1);
+ *ws = MEM_EX_WS;
+ return 1;
+}
+
+int
memory_read(asi, addr, data, sz, ws)
int32 asi;
uint32 addr;
diff --git a/sim/erc32/interf.c b/sim/erc32/interf.c
index 0a83c4d..dd7283e 100644
--- a/sim/erc32/interf.c
+++ b/sim/erc32/interf.c
@@ -95,9 +95,8 @@ run_sim(sregs, icount, dis)
if (sregs->pc == 0 || sregs->npc == 0)
printf ("bogus pc or npc\n");
#endif
- mexc = memory_read(sregs->asi, sregs->pc, &sregs->inst,
- 2, &sregs->hold);
-#if 1 /* DELETE ME! for debugging purposes only */
+ mexc = memory_iread(sregs->pc, &sregs->inst, &sregs->hold);
+#if 0 /* DELETE ME! for debugging purposes only */
if (sis_verbose > 2)
printf("pc %x, np %x, sp %x, fp %x, wm %x, cw %x, i %08x\n",
sregs->pc, sregs->npc,
diff --git a/sim/erc32/sis.c b/sim/erc32/sis.c
index dcb5ebf..b066a56 100644
--- a/sim/erc32/sis.c
+++ b/sim/erc32/sis.c
@@ -75,7 +75,7 @@ run_sim(sregs, icount, dis)
uint64 icount;
int dis;
{
- int irq, mexc, deb, asi;
+ int irq, mexc, deb;
sregs->starttime = get_time();
init_stdio();
@@ -84,11 +84,7 @@ run_sim(sregs, icount, dis)
irq = 0;
while (icount > 0) {
- if (sregs->psr & 0x080)
- asi = 9;
- else
- asi = 8;
- mexc = memory_read(asi, sregs->pc, &sregs->inst, 2, &sregs->hold);
+ mexc = memory_iread(sregs->pc, &sregs->inst, &sregs->hold);
sregs->icnt = 1;
if (sregs->annul) {
sregs->annul = 0;
diff --git a/sim/erc32/sis.h b/sim/erc32/sis.h
index 573e026..95c7858 100644
--- a/sim/erc32/sis.h
+++ b/sim/erc32/sis.h
@@ -169,6 +169,7 @@ extern void sim_halt (void);
extern void exit_sim (void);
extern void init_stdio (void);
extern void restore_stdio (void);
+extern int memory_iread (uint32 addr, uint32 *data, int32 *ws);
extern int memory_read (int32 asi, uint32 addr, uint32 *data,
int32 sz, int32 *ws);
extern int memory_write (int32 asi, uint32 addr, uint32 *data,
@@ -179,6 +180,7 @@ extern int sis_memory_read (uint32 addr, char *data,
uint32 length);
/* func.c */
+extern struct pstate sregs;
extern void set_regi (struct pstate *sregs, int32 reg,
uint32 rval);
extern void get_regi (struct pstate *sregs, int32 reg, char *buf);
--
1.9.1
^ permalink raw reply [flat|nested] 34+ messages in thread
* [PATCH v3 00/14] Update of the SPARC SIS simulator
@ 2015-03-01 21:10 Jiri Gaisler
2015-03-01 21:10 ` [PATCH v3 03/14] sim/erc32: Switched emulated memory to host endian order Jiri Gaisler
` (13 more replies)
0 siblings, 14 replies; 34+ messages in thread
From: Jiri Gaisler @ 2015-03-01 21:10 UTC (permalink / raw)
To: gdb-patches; +Cc: Jiri Gaisler
Third version of this patch set. The patch numbering has changed
as some of the original 22 patches have been merged.
-----------------------------------------------------------------
This is a 22-part patch that brings the sis simulator into working
order, and adds support for emulation of the leon2 and leon3 cpus.
The sis simulator was written by me in the mid 90's, to emulate the erc32
processor (SPARC V7). It was included into gdb by Cygnus (Stan Shebs?),
and adapted to also emulate the Fujistu Sparlite processor. The simulator
has not been actively maintained for about 15 years, and suffered some
bit-rot. It's primary use has been for RTEMS development. The erc32
processor is now becoming obsolete, and being replaced by leon2 and
leon3 cpus in many ESA and NASA missions. These patches will
allow sis to be useful again, and support the newer leon2/3 processor.
Jiri Gaisler (14):
sim/erc32: Added -v command line switch for verbose output
sim/erc32: Removed type mismatch compiler warnings
sim/erc32: Switched emulated memory to host endian order.
sim/erc32: use SIM_AC_OPTION_HOSTENDIAN to probe for host endianess
sim/erc32: Use memory_iread() function for instruction fetching.
sim/erc32: Fix a few compiler warnings
sim/erc32: Use gdb callback for UART I/O when linked with gdb.
sim/erc32: Access memory subsystem through struct memsys.
sim/erc32: Move local extern declarations into sis.h
sim/erc32: Add support for LEON3 processor emulation.
sim/erc32: Add support for LEON2 processor emulation.
sim/erc32: Updated documentation.
sim/erc32: Add data watchpoint support
Add watchpoint support to gdb simulator interface.
gdb/remote-sim.c | 69 +++
include/gdb/remote-sim.h | 24 +
sim/arm/wrapper.c | 26 ++
sim/avr/interp.c | 25 +
sim/bfin/Makefile.in | 1 +
sim/common/sim-watch-remote.c | 27 ++
sim/cr16/interp.c | 26 ++
sim/cris/Makefile.in | 1 +
sim/erc32/Makefile.in | 22 +-
sim/erc32/NEWS | 108 -----
sim/erc32/README.gdb | 67 ---
sim/erc32/README.leon2 | 53 +++
sim/erc32/README.leon3 | 53 +++
sim/erc32/README.sis | 250 ++++------
sim/erc32/config.in | 15 +
sim/erc32/configure | 260 ++++++++++-
sim/erc32/configure.ac | 1 +
sim/erc32/end.c | 27 --
sim/erc32/erc32.c | 390 ++++++++--------
sim/erc32/exec.c | 351 +++++++++++---
sim/erc32/func.c | 273 ++++++++---
sim/erc32/grlib.c | 98 ++++
sim/erc32/grlib.h | 57 +++
sim/erc32/help.c | 2 +-
sim/erc32/interf.c | 351 ++++++++++----
sim/erc32/leon2.c | 985 +++++++++++++++++++++++++++++++++++++++
sim/erc32/leon3.c | 1017 +++++++++++++++++++++++++++++++++++++++++
sim/erc32/sis.c | 115 +++--
sim/erc32/sis.h | 123 +++--
sim/erc32/startsim | 4 -
sim/frv/Makefile.in | 1 +
sim/h8300/Makefile.in | 1 +
sim/iq2000/Makefile.in | 1 +
sim/lm32/Makefile.in | 1 +
sim/m32c/gdb-if.c | 26 ++
sim/m32r/Makefile.in | 1 +
sim/m68hc11/Makefile.in | 1 +
sim/mcore/interp.c | 26 ++
sim/microblaze/Makefile.in | 2 +-
sim/mips/Makefile.in | 1 +
sim/mn10300/Makefile.in | 1 +
sim/moxie/interp.c | 26 ++
sim/msp430/Makefile.in | 1 +
sim/ppc/gdb-sim.c | 26 ++
sim/rl78/gdb-if.c | 26 ++
sim/rx/gdb-if.c | 26 ++
sim/sh/interp.c | 26 ++
sim/sh64/Makefile.in | 1 +
sim/v850/Makefile.in | 3 +-
49 files changed, 4150 insertions(+), 868 deletions(-)
create mode 100644 sim/common/sim-watch-remote.c
delete mode 100644 sim/erc32/NEWS
delete mode 100644 sim/erc32/README.gdb
create mode 100644 sim/erc32/README.leon2
create mode 100644 sim/erc32/README.leon3
delete mode 100644 sim/erc32/end.c
create mode 100644 sim/erc32/grlib.c
create mode 100644 sim/erc32/grlib.h
create mode 100644 sim/erc32/leon2.c
create mode 100644 sim/erc32/leon3.c
delete mode 100644 sim/erc32/startsim
--
1.9.1
^ permalink raw reply [flat|nested] 34+ messages in thread
* [PATCH v3 09/14] sim/erc32: Move local extern declarations into sis.h
2015-03-01 21:10 [PATCH v3 00/14] Update of the SPARC SIS simulator Jiri Gaisler
` (3 preceding siblings ...)
2015-03-01 21:10 ` [PATCH v3 02/14] sim/erc32: Removed type mismatch compiler warnings Jiri Gaisler
@ 2015-03-01 21:11 ` Jiri Gaisler
2015-03-01 21:11 ` [PATCH v3 12/14] sim/erc32: Updated documentation Jiri Gaisler
` (8 subsequent siblings)
13 siblings, 0 replies; 34+ messages in thread
From: Jiri Gaisler @ 2015-03-01 21:11 UTC (permalink / raw)
To: gdb-patches; +Cc: Jiri Gaisler
* erc32.c : Move extern declarations to sis.h
* exec.c, func.c, interf.c, sis.c : As above.
---
sim/erc32/erc32.c | 10 ----------
sim/erc32/exec.c | 7 -------
sim/erc32/func.c | 12 ++++--------
sim/erc32/interf.c | 19 -------------------
sim/erc32/sis.c | 20 --------------------
sim/erc32/sis.h | 20 ++++++++++++++++++++
6 files changed, 24 insertions(+), 64 deletions(-)
diff --git a/sim/erc32/erc32.c b/sim/erc32/erc32.c
index 701629d..81a1d53 100644
--- a/sim/erc32/erc32.c
+++ b/sim/erc32/erc32.c
@@ -33,12 +33,6 @@
#include "sis.h"
#include "sim-config.h"
-extern int ctrl_c;
-extern int32 sis_verbose;
-extern int32 sparclite, sparclite_board;
-extern int rom8,wrp,uben;
-extern char uart_dev1[], uart_dev2[];
-
static int tty_setup = 1; /* default setup if not a tty */
/* MEC registers */
@@ -295,8 +289,6 @@ static unsigned char *
static void store_bytes (unsigned char *mem, uint32 waddr,
uint32 *data, int sz, int32 *ws);
-extern int ext_irl;
-
static host_callback *callback;
@@ -1879,8 +1871,6 @@ sis_memory_read(addr, data, length)
return (length);
}
-extern struct pstate sregs;
-
void
boot_init (void)
{
diff --git a/sim/erc32/exec.c b/sim/erc32/exec.c
index 7e13f1e..ec865ee 100644
--- a/sim/erc32/exec.c
+++ b/sim/erc32/exec.c
@@ -24,7 +24,6 @@
#include <math.h>
#include <stdio.h>
-extern int32 sis_verbose, sparclite;
int ext_irl = 0;
/* Load/store interlock delay */
@@ -228,10 +227,6 @@ static int fpexec (uint32 op3, uint32 rd, uint32 rs1, uint32 rs2,
struct pstate *sregs);
static int chk_asi (struct pstate *sregs, uint32 *asi, uint32 op3);
-
-extern struct estate ebase;
-extern int32 nfp,ift;
-
#ifdef ERRINJ
extern uint32 errtt, errftt;
#endif
@@ -2017,8 +2012,6 @@ execute_trap(sregs)
}
-extern struct irqcell irqarr[16];
-
int
check_interrupts(sregs)
struct pstate *sregs;
diff --git a/sim/erc32/func.c b/sim/erc32/func.c
index 726da05..7a67430 100644
--- a/sim/erc32/func.c
+++ b/sim/erc32/func.c
@@ -40,7 +40,10 @@ int current_target_byte_order = BIG_ENDIAN;
int dumbio = 0; /* normal, smart, terminal oriented IO by default */
struct disassemble_info dinfo;
struct pstate sregs;
-extern struct estate ebase;
+struct estate ebase;
+struct evcell evbuf[EVENT_MAX];
+struct irqcell irqarr[16];
+
int ctrl_c = 0;
int sis_verbose = 0;
char *sis_version = "2.7.5";
@@ -54,7 +57,6 @@ int sparclite = 0; /* emulating SPARClite instructions? */
int sparclite_board = 0; /* emulating SPARClite board RAM? */
char uart_dev1[128] = "";
char uart_dev2[128] = "";
-extern int ext_irl;
uint32 last_load_addr = 0;
int nouartrx = 0;
host_callback *sim_callback;
@@ -730,12 +732,6 @@ init_signals()
}
-extern struct disassemble_info dinfo;
-
-struct estate ebase;
-struct evcell evbuf[EVENT_MAX];
-struct irqcell irqarr[16];
-
static int
disp_fpu(sregs)
struct pstate *sregs;
diff --git a/sim/erc32/interf.c b/sim/erc32/interf.c
index 1bd270d..f87c86c 100644
--- a/sim/erc32/interf.c
+++ b/sim/erc32/interf.c
@@ -36,25 +36,6 @@
#define PSR_CWP 0x7
-extern struct disassemble_info dinfo;
-extern struct estate ebase;
-
-extern int nfp;
-extern int ift;
-extern int rom8;
-extern int wrp;
-extern int uben;
-extern char *sis_version;
-extern struct estate ebase;
-extern struct evcell evbuf[];
-extern struct irqcell irqarr[];
-extern int irqpend, ext_irl;
-extern int sparclite;
-extern int dumbio;
-extern int sparclite_board;
-extern int termsave;
-extern char uart_dev1[], uart_dev2[];
-
int sis_gdb_break = 1;
int
diff --git a/sim/erc32/sis.c b/sim/erc32/sis.c
index abcf950..ff8a373 100644
--- a/sim/erc32/sis.c
+++ b/sim/erc32/sis.c
@@ -42,26 +42,6 @@
/* Command history buffer length - MUST be binary */
#define HIST_LEN 64
-extern struct disassemble_info dinfo;
-extern struct estate ebase;
-
-extern int nfp;
-extern int ift;
-extern int wrp;
-extern int rom8;
-extern int uben;
-extern char *sis_version;
-extern struct estate ebase;
-extern struct evcell evbuf[];
-extern struct irqcell irqarr[];
-extern int irqpend, ext_irl;
-extern int termsave;
-extern int sparclite;
-extern int dumbio;
-extern char uart_dev1[];
-extern char uart_dev2[];
-extern uint32 last_load_addr;
-
#ifdef ERA
extern int era;
#endif
diff --git a/sim/erc32/sis.h b/sim/erc32/sis.h
index 6372169..7f94d55 100644
--- a/sim/erc32/sis.h
+++ b/sim/erc32/sis.h
@@ -166,8 +166,27 @@ extern const struct memsys erc32sys;
/* func.c */
extern struct pstate sregs;
+extern struct estate ebase;
+extern struct evcell evbuf[];
+extern struct irqcell irqarr[];
+extern int nfp;
+extern int ift;
extern int ctrl_c;
extern int sis_verbose;
+extern char *sis_version;
+extern int sparclite;
+extern int sparclite_board;
+extern uint32 last_load_addr;
+extern int wrp;
+extern int rom8;
+extern int uben;
+extern int irqpend;
+extern int ext_irl;
+extern int termsave;
+extern int dumbio;
+extern char uart_dev1[];
+extern char uart_dev2[];
+
extern void set_regi (struct pstate *sregs, int32 reg,
uint32 rval);
extern void get_regi (struct pstate *sregs, int32 reg, char *buf);
@@ -178,6 +197,7 @@ extern void init_bpt (struct pstate *sregs);
extern void init_signals (void);
struct disassemble_info;
+extern struct disassemble_info dinfo;
extern void dis_mem (uint32 addr, uint32 len,
struct disassemble_info *info);
extern void event (void (*cfunc) (), int32 arg, uint64 delta);
--
1.9.1
^ permalink raw reply [flat|nested] 34+ messages in thread
* [PATCH v3 08/14] sim/erc32: Access memory subsystem through struct memsys.
2015-03-01 21:10 [PATCH v3 00/14] Update of the SPARC SIS simulator Jiri Gaisler
` (5 preceding siblings ...)
2015-03-01 21:11 ` [PATCH v3 12/14] sim/erc32: Updated documentation Jiri Gaisler
@ 2015-03-01 21:11 ` Jiri Gaisler
2015-03-02 1:20 ` Mike Frysinger
2015-03-01 21:11 ` [PATCH v3 01/14] sim/erc32: Added -v command line switch for verbose output Jiri Gaisler
` (6 subsequent siblings)
13 siblings, 1 reply; 34+ messages in thread
From: Jiri Gaisler @ 2015-03-01 21:11 UTC (permalink / raw)
To: gdb-patches; +Cc: Jiri Gaisler
Introduce an common API to access emulated memory. This allows
to emulate different types of SPARC-based CPUs.
* erc32.c : Export memory operations through struct memsys erc32sys.
* exec.c (dispatch_instruction) : Access memory through common API.
* func.c, interf.c, sis.c : As above.
* sis.h : Define struct memsys as common memory API
---
sim/erc32/erc32.c | 54 ++++++++++++++++++++++++++++--------------------------
sim/erc32/exec.c | 42 +++++++++++++++++++++---------------------
sim/erc32/func.c | 37 +++++++++++++++++++++----------------
sim/erc32/interf.c | 39 +++++++++++++++++++++------------------
sim/erc32/sis.c | 15 ++++++---------
sim/erc32/sis.h | 46 ++++++++++++++++++++++++++++------------------
6 files changed, 125 insertions(+), 108 deletions(-)
diff --git a/sim/erc32/erc32.c b/sim/erc32/erc32.c
index c0dc731..701629d 100644
--- a/sim/erc32/erc32.c
+++ b/sim/erc32/erc32.c
@@ -39,8 +39,7 @@ extern int32 sparclite, sparclite_board;
extern int rom8,wrp,uben;
extern char uart_dev1[], uart_dev2[];
-int dumbio = 0; /* normal, smart, terminal oriented IO by default */
-int tty_setup = 1; /* default setup if not a tty */
+static int tty_setup = 1; /* default setup if not a tty */
/* MEC registers */
#define MEC_START 0x01f80000
@@ -56,11 +55,6 @@ int tty_setup = 1; /* default setup if not a tty */
extern int errmec;
#endif
-/* The target's byte order is big-endian by default until we load a
- little-endian program. */
-
-int current_target_byte_order = BIG_ENDIAN;
-
#define MEC_WS 0 /* Waitstates per MEC access (0 ws) */
#define MOK 0
@@ -308,7 +302,7 @@ static host_callback *callback;
/* One-time init */
-void
+static void
init_sim()
{
callback = sim_callback;
@@ -317,7 +311,7 @@ init_sim()
/* Power-on reset init */
-void
+static void
reset()
{
mec_reset();
@@ -397,7 +391,7 @@ mecparerror()
/* IU error mode manager */
-void
+static void
error_mode(pc)
uint32 pc;
{
@@ -468,7 +462,7 @@ decode_mcr()
/* Flush ports when simulator stops */
-void
+static void
sim_halt()
{
#ifdef FAST_UART
@@ -476,13 +470,6 @@ sim_halt()
#endif
}
-int
-sim_stop(SIM_DESC sd)
-{
- ctrl_c = 1;
- return 1;
-}
-
static void
close_port()
{
@@ -492,7 +479,7 @@ close_port()
fclose(f2in);
}
-void
+static void
exit_sim()
{
close_port();
@@ -944,7 +931,7 @@ mec_write(addr, data)
static int ifd1 = -1, ifd2 = -1, ofd1 = -1, ofd2 = -1;
-void
+static void
init_stdio()
{
if (dumbio)
@@ -959,7 +946,7 @@ init_stdio()
}
}
-void
+static void
restore_stdio()
{
if (dumbio)
@@ -1631,7 +1618,7 @@ store_bytes (mem, waddr, data, sz, ws)
/* Memory emulation */
-int
+static int
memory_iread(uint32 addr, uint32 *data, int32 *ws)
{
uint32 asi;
@@ -1655,7 +1642,7 @@ memory_iread(uint32 addr, uint32 *data, int32 *ws)
return 1;
}
-int
+static int
memory_read(asi, addr, data, sz, ws)
int32 asi;
uint32 addr;
@@ -1726,7 +1713,7 @@ memory_read(asi, addr, data, sz, ws)
return (1);
}
-int
+static int
memory_write(asi, addr, data, sz, ws)
int32 asi;
uint32 addr;
@@ -1862,7 +1849,7 @@ get_mem_ptr(addr, size)
return ((char *) -1);
}
-int
+static int
sis_memory_write(addr, data, length)
uint32 addr;
const unsigned char *data;
@@ -1877,7 +1864,7 @@ sis_memory_write(addr, data, length)
return (length);
}
-int
+static int
sis_memory_read(addr, data, length)
uint32 addr;
char *data;
@@ -1907,3 +1894,18 @@ boot_init (void)
sregs.r[14] = sregs.r[30] - 96 * 4;
mec_mcr |= 1; /* power-down enabled */
}
+
+const struct memsys erc32sys = {
+ init_sim,
+ reset,
+ error_mode,
+ sim_halt,
+ exit_sim,
+ init_stdio,
+ restore_stdio,
+ memory_iread,
+ memory_read,
+ memory_write,
+ sis_memory_write,
+ sis_memory_read
+};
diff --git a/sim/erc32/exec.c b/sim/erc32/exec.c
index e2935ed..7e13f1e 100644
--- a/sim/erc32/exec.c
+++ b/sim/erc32/exec.c
@@ -1244,9 +1244,9 @@ dispatch_instruction (sregs)
else
rdd = &(sregs->g[rd]);
}
- mexc = memory_read(asi, address, ddata, 2, &ws);
+ mexc = ms->memory_read(asi, address, ddata, 2, &ws);
sregs->hold += ws;
- mexc |= memory_read(asi, address+4, &ddata[1], 2, &ws);
+ mexc |= ms->memory_read(asi, address+4, &ddata[1], 2, &ws);
sregs->hold += ws;
sregs->icnt = T_LDD;
if (mexc) {
@@ -1267,7 +1267,7 @@ dispatch_instruction (sregs)
sregs->trap = TRAP_UNALI;
break;
}
- mexc = memory_read(asi, address, &data, 2, &ws);
+ mexc = ms->memory_read(asi, address, &data, 2, &ws);
sregs->hold += ws;
if (mexc) {
sregs->trap = TRAP_DEXC;
@@ -1278,7 +1278,7 @@ dispatch_instruction (sregs)
case LDSTUBA:
if (!chk_asi(sregs, &asi, op3)) break;
case LDSTUB:
- mexc = memory_read(asi, address, &data, 0, &ws);
+ mexc = ms->memory_read(asi, address, &data, 0, &ws);
sregs->hold += ws;
sregs->icnt = T_LDST;
if (mexc) {
@@ -1288,7 +1288,7 @@ dispatch_instruction (sregs)
data = extract_byte(data, address);
*rdd = data;
data = 0x0ff;
- mexc = memory_write(asi, address, &data, 0, &ws);
+ mexc = ms->memory_write(asi, address, &data, 0, &ws);
sregs->hold += ws;
if (mexc) {
sregs->trap = TRAP_DEXC;
@@ -1302,7 +1302,7 @@ dispatch_instruction (sregs)
if (!chk_asi(sregs, &asi, op3)) break;
case LDSB:
case LDUB:
- mexc = memory_read(asi, address, &data, 0, &ws);
+ mexc = ms->memory_read(asi, address, &data, 0, &ws);
sregs->hold += ws;
if (mexc) {
sregs->trap = TRAP_DEXC;
@@ -1323,7 +1323,7 @@ dispatch_instruction (sregs)
sregs->trap = TRAP_UNALI;
break;
}
- mexc = memory_read(asi, address, &data, 1, &ws);
+ mexc = ms->memory_read(asi, address, &data, 1, &ws);
sregs->hold += ws;
if (mexc) {
sregs->trap = TRAP_DEXC;
@@ -1349,7 +1349,7 @@ dispatch_instruction (sregs)
(sregs->frs2 == rd))
sregs->fhold += (sregs->ftime - ebase.simtime);
}
- mexc = memory_read(asi, address, &data, 2, &ws);
+ mexc = ms->memory_read(asi, address, &data, 2, &ws);
sregs->hold += ws;
sregs->flrd = rd;
sregs->ltime = ebase.simtime + sregs->icnt + FLSTHOLD +
@@ -1375,9 +1375,9 @@ dispatch_instruction (sregs)
((sregs->frs2 >> 1) == (rd >> 1)))
sregs->fhold += (sregs->ftime - ebase.simtime);
}
- mexc = memory_read(asi, address, ddata, 2, &ws);
+ mexc = ms->memory_read(asi, address, ddata, 2, &ws);
sregs->hold += ws;
- mexc |= memory_read(asi, address+4, &ddata[1], 2, &ws);
+ mexc |= ms->memory_read(asi, address+4, &ddata[1], 2, &ws);
sregs->hold += ws;
sregs->icnt = T_LDD;
if (mexc) {
@@ -1406,7 +1406,7 @@ dispatch_instruction (sregs)
sregs->trap = TRAP_UNALI;
break;
}
- mexc = memory_read(asi, address, &data, 2, &ws);
+ mexc = ms->memory_read(asi, address, &data, 2, &ws);
sregs->hold += ws;
if (mexc) {
sregs->trap = TRAP_DEXC;
@@ -1428,7 +1428,7 @@ dispatch_instruction (sregs)
if (ebase.simtime < sregs->ftime) {
sregs->fhold += (sregs->ftime - ebase.simtime);
}
- mexc = memory_write(asi, address, &sregs->fsr, 2, &ws);
+ mexc = ms->memory_write(asi, address, &sregs->fsr, 2, &ws);
sregs->hold += ws;
if (mexc) {
sregs->trap = TRAP_DEXC;
@@ -1442,7 +1442,7 @@ dispatch_instruction (sregs)
sregs->trap = TRAP_UNALI;
break;
}
- mexc = memory_write(asi, address, rdd, 2, &ws);
+ mexc = ms->memory_write(asi, address, rdd, 2, &ws);
sregs->hold += ws;
if (mexc) {
sregs->trap = TRAP_DEXC;
@@ -1451,7 +1451,7 @@ dispatch_instruction (sregs)
case STBA:
if (!chk_asi(sregs, &asi, op3)) break;
case STB:
- mexc = memory_write(asi, address, rdd, 0, &ws);
+ mexc = ms->memory_write(asi, address, rdd, 0, &ws);
sregs->hold += ws;
if (mexc) {
sregs->trap = TRAP_DEXC;
@@ -1471,7 +1471,7 @@ dispatch_instruction (sregs)
else
rdd = &(sregs->g[rd]);
}
- mexc = memory_write(asi, address, rdd, 3, &ws);
+ mexc = ms->memory_write(asi, address, rdd, 3, &ws);
sregs->hold += ws;
sregs->icnt = T_STD;
#ifdef STAT
@@ -1500,7 +1500,7 @@ dispatch_instruction (sregs)
break;
}
rdd = &(sregs->fpq[0]);
- mexc = memory_write(asi, address, rdd, 3, &ws);
+ mexc = ms->memory_write(asi, address, rdd, 3, &ws);
sregs->hold += ws;
sregs->icnt = T_STD;
#ifdef STAT
@@ -1521,7 +1521,7 @@ dispatch_instruction (sregs)
sregs->trap = TRAP_UNALI;
break;
}
- mexc = memory_write(asi, address, rdd, 1, &ws);
+ mexc = ms->memory_write(asi, address, rdd, 1, &ws);
sregs->hold += ws;
if (mexc) {
sregs->trap = TRAP_DEXC;
@@ -1540,7 +1540,7 @@ dispatch_instruction (sregs)
if (sregs->frd == rd)
sregs->fhold += (sregs->ftime - ebase.simtime);
}
- mexc = memory_write(asi, address, &sregs->fsi[rd], 2, &ws);
+ mexc = ms->memory_write(asi, address, &sregs->fsi[rd], 2, &ws);
sregs->hold += ws;
if (mexc) {
sregs->trap = TRAP_DEXC;
@@ -1560,7 +1560,7 @@ dispatch_instruction (sregs)
if ((sregs->frd == rd) || (sregs->frd + 1 == rd))
sregs->fhold += (sregs->ftime - ebase.simtime);
}
- mexc = memory_write(asi, address, &sregs->fsi[rd], 3, &ws);
+ mexc = ms->memory_write(asi, address, &sregs->fsi[rd], 3, &ws);
sregs->hold += ws;
sregs->icnt = T_STD;
#ifdef STAT
@@ -1577,13 +1577,13 @@ dispatch_instruction (sregs)
sregs->trap = TRAP_UNALI;
break;
}
- mexc = memory_read(asi, address, &data, 2, &ws);
+ mexc = ms->memory_read(asi, address, &data, 2, &ws);
sregs->hold += ws;
if (mexc) {
sregs->trap = TRAP_DEXC;
break;
}
- mexc = memory_write(asi, address, rdd, 2, &ws);
+ mexc = ms->memory_write(asi, address, rdd, 2, &ws);
sregs->hold += ws;
sregs->icnt = T_LDST;
if (mexc) {
diff --git a/sim/erc32/func.c b/sim/erc32/func.c
index dd8bc52..726da05 100644
--- a/sim/erc32/func.c
+++ b/sim/erc32/func.c
@@ -33,7 +33,11 @@
#define VAL(x) strtoul(x,(char **)NULL,0)
-extern int current_target_byte_order;
+/* The target's byte order is big-endian by default until we load a
+ little-endian program. */
+int current_target_byte_order = BIG_ENDIAN;
+
+int dumbio = 0; /* normal, smart, terminal oriented IO by default */
struct disassemble_info dinfo;
struct pstate sregs;
extern struct estate ebase;
@@ -54,6 +58,7 @@ extern int ext_irl;
uint32 last_load_addr = 0;
int nouartrx = 0;
host_callback *sim_callback;
+const struct memsys *ms = &erc32sys;
#ifdef ERRINJ
uint32 errcnt = 0;
@@ -433,7 +438,7 @@ exec_cmd(sregs, cmd)
stat = run_sim(sregs, VAL(cmd1), 0);
}
daddr = sregs->pc;
- sim_halt();
+ ms->sim_halt();
} else if (strncmp(cmd1, "debug", clen) == 0) {
if ((cmd1 = strtok(NULL, " \t\n\r")) != NULL) {
sis_verbose = VAL(cmd1);
@@ -484,7 +489,7 @@ exec_cmd(sregs, cmd)
stat = run_sim(sregs, UINT64_MAX, 0);
}
daddr = sregs->pc;
- sim_halt();
+ ms->sim_halt();
} else if (strncmp(cmd1, "help", clen) == 0) {
gen_help();
} else if (strncmp(cmd1, "history", clen) == 0) {
@@ -558,7 +563,7 @@ exec_cmd(sregs, cmd)
stat = run_sim(sregs, VAL(cmd1), 0);
}
daddr = sregs->pc;
- sim_halt();
+ ms->sim_halt();
} else if (strncmp(cmd1, "shell", clen) == 0) {
if ((cmd1 = strtok(NULL, " \t\n\r")) != NULL) {
if (system(&cmdsave[clen])) {
@@ -568,12 +573,12 @@ exec_cmd(sregs, cmd)
} else if (strncmp(cmd1, "step", clen) == 0) {
stat = run_sim(sregs, 1, 1);
daddr = sregs->pc;
- sim_halt();
+ ms->sim_halt();
} else if (strncmp(cmd1, "tcont", clen) == 0) {
sregs->tlimit = limcalc(sregs->freq);
stat = run_sim(sregs, UINT64_MAX, 0);
daddr = sregs->pc;
- sim_halt();
+ ms->sim_halt();
} else if (strncmp(cmd1, "tgo", clen) == 0) {
if ((cmd1 = strtok(NULL, " \t\n\r")) == NULL) {
len = last_load_addr;
@@ -586,7 +591,7 @@ exec_cmd(sregs, cmd)
printf("resuming at 0x%08x\n",sregs->pc);
stat = run_sim(sregs, UINT64_MAX, 0);
daddr = sregs->pc;
- sim_halt();
+ ms->sim_halt();
} else if (strncmp(cmd1, "tlimit", clen) == 0) {
sregs->tlimit = limcalc(sregs->freq);
if (sregs->tlimit != (uint32) -1)
@@ -600,7 +605,7 @@ exec_cmd(sregs, cmd)
}
printf("\n");
daddr = sregs->pc;
- sim_halt();
+ ms->sim_halt();
} else if (strncmp(cmd1, "trun", clen) == 0) {
ebase.simtime = 0;
reset_all();
@@ -608,7 +613,7 @@ exec_cmd(sregs, cmd)
sregs->tlimit = limcalc(sregs->freq);
stat = run_sim(sregs, UINT64_MAX, 0);
daddr = sregs->pc;
- sim_halt();
+ ms->sim_halt();
} else
printf("syntax error\n");
}
@@ -780,7 +785,7 @@ static void print_insn_sparc_sis(uint32 addr, struct disassemble_info *info)
{
unsigned char i[4];
- sis_memory_read(addr, i, 4);
+ ms->sis_memory_read(addr, i, 4);
dinfo.buffer_vma = addr;
dinfo.buffer_length = 4;
dinfo.buffer = i;
@@ -796,10 +801,10 @@ disp_ctrl(sregs)
printf("\n psr: %08X wim: %08X tbr: %08X y: %08X\n",
sregs->psr, sregs->wim, sregs->tbr, sregs->y);
- sis_memory_read(sregs->pc, (char *) &i, 4);
+ ms->sis_memory_read(sregs->pc, (char *) &i, 4);
printf("\n pc: %08X = %08X ", sregs->pc, i);
print_insn_sparc_sis(sregs->pc, &dinfo);
- sis_memory_read(sregs->npc, (char *) &i, 4);
+ ms->sis_memory_read(sregs->npc, (char *) &i, 4);
printf("\n npc: %08X = %08X ", sregs->npc, i);
print_insn_sparc_sis(sregs->npc, &dinfo);
if (sregs->err_mode)
@@ -830,7 +835,7 @@ disp_mem(addr, len)
for (i = addr & ~3; i < ((addr + len) & ~3); i += 16) {
printf("\n %8X ", i);
for (j = 0; j < 4; j++) {
- sis_memory_read((i + (j * 4)), data.u8, 4);
+ ms->sis_memory_read((i + (j * 4)), data.u8, 4);
printf("%08x ", data.u32);
mem[j] = data.u32;
}
@@ -857,7 +862,7 @@ dis_mem(addr, len, info)
uint32 *wdata = (uint32 *) data;
for (i = addr & -3; i < ((addr & -3) + (len << 2)); i += 4) {
- sis_memory_read(i, data, 4);
+ ms->sis_memory_read(i, data, 4);
printf(" %08x %08x ", i, *wdata);
print_insn_sparc_sis(i, info);
if (i >= 0xfffffffc) break;
@@ -1021,7 +1026,7 @@ reset_all()
{
init_event(); /* Clear event queue */
init_regs(&sregs);
- reset();
+ ms->reset();
#ifdef ERRINJ
errinjstart();
#endif
@@ -1142,7 +1147,7 @@ bfd_load(fname)
#ifdef HOST_LITTLE_ENDIAN
for (i = 0; i < (count / 4); i++) wbuffer[i] = ntohl(wbuffer[i]); // endian swap
#endif
- sis_memory_write(section_address, buffer, count);
+ ms->sis_memory_write(section_address, buffer, count);
section_address += count;
fptr += count;
diff --git a/sim/erc32/interf.c b/sim/erc32/interf.c
index 497b3b3..1bd270d 100644
--- a/sim/erc32/interf.c
+++ b/sim/erc32/interf.c
@@ -37,17 +37,13 @@
#define PSR_CWP 0x7
extern struct disassemble_info dinfo;
-extern struct pstate sregs;
extern struct estate ebase;
-extern int current_target_byte_order;
-extern int ctrl_c;
extern int nfp;
extern int ift;
extern int rom8;
extern int wrp;
extern int uben;
-extern int sis_verbose;
extern char *sis_version;
extern struct estate ebase;
extern struct evcell evbuf[];
@@ -72,7 +68,7 @@ run_sim(sregs, icount, dis)
if (sis_verbose)
(*sim_callback->printf_filtered) (sim_callback, "resuming at %x\n",
sregs->pc);
- init_stdio();
+ ms->init_stdio();
sregs->starttime = get_time();
irq = 0;
if ((sregs->pc != 0) && (ebase.simtime == 0))
@@ -93,7 +89,7 @@ run_sim(sregs, icount, dis)
if (sregs->pc == 0 || sregs->npc == 0)
printf ("bogus pc or npc\n");
#endif
- mexc = memory_iread(sregs->pc, &sregs->inst, &sregs->hold);
+ mexc = ms->memory_iread(sregs->pc, &sregs->inst, &sregs->hold);
#if 0 /* DELETE ME! for debugging purposes only */
if (sis_verbose > 2)
printf("pc %x, np %x, sp %x, fp %x, wm %x, cw %x, i %08x\n",
@@ -119,8 +115,8 @@ run_sim(sregs, icount, dis)
if (sis_verbose)
(*sim_callback->printf_filtered) (sim_callback,
"SW BP hit at %x\n", sregs->pc);
- sim_halt();
- restore_stdio();
+ ms->sim_halt();
+ ms->restore_stdio();
clearerr(stdin);
return (BPT_HIT);
} else
@@ -138,12 +134,12 @@ run_sim(sregs, icount, dis)
icount = 0;
}
}
- sim_halt();
+ ms->sim_halt();
sregs->tottime += get_time() - sregs->starttime;
- restore_stdio();
+ ms->restore_stdio();
clearerr(stdin);
if (sregs->err_mode)
- error_mode(sregs->pc);
+ ms->error_mode(sregs->pc);
if (sregs->err_mode)
return (ERROR);
if (sregs->bphit) {
@@ -273,7 +269,7 @@ sim_open (kind, callback, abfd, argv)
#endif
reset_all();
ebase.simtime = 0;
- init_sim();
+ ms->init_sim();
init_bpt(&sregs);
reset_stat(&sregs);
@@ -287,7 +283,7 @@ sim_close(sd, quitting)
int quitting;
{
- exit_sim();
+ ms->exit_sim();
fcntl(0, F_SETFL, termsave);
};
@@ -369,9 +365,9 @@ sim_write(sd, mem, buf, length)
for (i = 0; i < length; i += 4) {
ibuf[i] = ntohl(ibufp[i]);
}
- return (sis_memory_write(mem, (char *) ibuf, length));
+ return (ms->sis_memory_write(mem, (char *) ibuf, length));
#else
- return (sis_memory_write(mem, buf, length));
+ return (ms->sis_memory_write(mem, buf, length));
#endif
}
@@ -386,7 +382,7 @@ sim_read(sd, mem, buf, length)
int *ibuf = (int *) buf;
int i, len;
- len = sis_memory_read(mem, buf, length);
+ len = ms->sis_memory_read(mem, buf, length);
if (length >= 4)
for (i = 0; i < length; i += 4) {
*ibuf = htonl(*ibuf);
@@ -394,7 +390,7 @@ sim_read(sd, mem, buf, length)
}
return (len);
#else
- return (sis_memory_read(mem, buf, length));
+ return (ms->sis_memory_read(mem, buf, length));
#endif
}
@@ -481,7 +477,7 @@ flush_windows ()
#endif
for (i = 0; i < 16; i++)
- memory_write (11, sp + 4 * i, &sregs.r[(win * 16 + 16 + i) & 0x7f], 2,
+ ms->memory_write (11, sp + 4 * i, &sregs.r[(win * 16 + 16 + i) & 0x7f], 2,
&ws);
if (win == cwp)
@@ -520,6 +516,13 @@ sim_complete_command (SIM_DESC sd, const char *text, const char *word)
return NULL;
}
+int
+sim_stop (SIM_DESC sd)
+{
+ ctrl_c = 1;
+ return 1;
+}
+
#if 0 /* FIXME: These shouldn't exist. */
int
diff --git a/sim/erc32/sis.c b/sim/erc32/sis.c
index 2623fc5..abcf950 100644
--- a/sim/erc32/sis.c
+++ b/sim/erc32/sis.c
@@ -43,16 +43,13 @@
#define HIST_LEN 64
extern struct disassemble_info dinfo;
-extern struct pstate sregs;
extern struct estate ebase;
-extern int ctrl_c;
extern int nfp;
extern int ift;
extern int wrp;
extern int rom8;
extern int uben;
-extern int sis_verbose;
extern char *sis_version;
extern struct estate ebase;
extern struct evcell evbuf[];
@@ -78,13 +75,13 @@ run_sim(sregs, icount, dis)
int irq, mexc, deb;
sregs->starttime = get_time();
- init_stdio();
+ ms->init_stdio();
if (sregs->err_mode) icount = 0;
deb = dis || sregs->histlen || sregs->bptnum;
irq = 0;
while (icount > 0) {
- mexc = memory_iread(sregs->pc, &sregs->inst, &sregs->hold);
+ mexc = ms->memory_iread(sregs->pc, &sregs->inst, &sregs->hold);
sregs->icnt = 1;
if (sregs->annul) {
sregs->annul = 0;
@@ -99,7 +96,7 @@ run_sim(sregs, icount, dis)
} else {
if (deb) {
if ((sregs->bphit = check_bpt(sregs)) != 0) {
- restore_stdio();
+ ms->restore_stdio();
return (BPT_HIT);
}
if (sregs->histlen) {
@@ -122,7 +119,7 @@ run_sim(sregs, icount, dis)
irq = 0;
sregs->err_mode = execute_trap(sregs);
if (sregs->err_mode) {
- error_mode(sregs->pc);
+ ms->error_mode(sregs->pc);
icount = 0;
}
}
@@ -134,7 +131,7 @@ run_sim(sregs, icount, dis)
}
}
sregs->tottime += get_time() - sregs->starttime;
- restore_stdio();
+ ms->restore_stdio();
if (sregs->err_mode)
return (ERROR);
if (ctrl_c) {
@@ -237,7 +234,7 @@ main(argc, argv)
ebase.simtime = 0;
reset_all();
init_bpt(&sregs);
- init_sim();
+ ms->init_sim();
if (lfile)
last_load_addr = bfd_load(argv[lfile]);
#ifdef STAT
diff --git a/sim/erc32/sis.h b/sim/erc32/sis.h
index 188825c..6372169 100644
--- a/sim/erc32/sis.h
+++ b/sim/erc32/sis.h
@@ -162,25 +162,12 @@ struct irqcell {
/* Prototypes */
/* erc32.c */
-extern void init_sim ();
-extern void reset (void);
-extern void error_mode (uint32 pc);
-extern void sim_halt (void);
-extern void exit_sim (void);
-extern void init_stdio (void);
-extern void restore_stdio (void);
-extern int memory_iread (uint32 addr, uint32 *data, int32 *ws);
-extern int memory_read (int32 asi, uint32 addr, uint32 *data,
- int32 sz, int32 *ws);
-extern int memory_write (int32 asi, uint32 addr, uint32 *data,
- int32 sz, int32 *ws);
-extern int sis_memory_write (uint32 addr,
- const unsigned char *data, uint32 length);
-extern int sis_memory_read (uint32 addr, char *data,
- uint32 length);
+extern const struct memsys erc32sys;
/* func.c */
-extern struct pstate sregs;
+extern struct pstate sregs;
+extern int ctrl_c;
+extern int sis_verbose;
extern void set_regi (struct pstate *sregs, int32 reg,
uint32 rval);
extern void get_regi (struct pstate *sregs, int32 reg, char *buf);
@@ -204,7 +191,9 @@ extern void sys_reset (void);
extern void sys_halt (void);
extern double get_time (void);
extern int nouartrx;
-extern host_callback *sim_callback;
+extern host_callback *sim_callback;
+extern int current_target_byte_order;
+extern int dumbio;
/* exec.c */
extern int dispatch_instruction (struct pstate *sregs);
@@ -224,3 +213,24 @@ extern void set_fsr (uint32 fsr);
/* help.c */
extern void usage (void);
extern void gen_help (void);
+
+struct memsys {
+ void (*init_sim) (void);
+ void (*reset) (void);
+ void (*error_mode) (uint32 pc);
+ void (*sim_halt) (void);
+ void (*exit_sim) (void);
+ void (*init_stdio) (void);
+ void (*restore_stdio) (void);
+ int (*memory_iread) (uint32 addr, uint32 *data, int32 *ws);
+ int (*memory_read) (int32 asi, uint32 addr, uint32 *data,
+ int32 sz, int32 *ws);
+ int (*memory_write) (int32 asi, uint32 addr, uint32 *data,
+ int32 sz, int32 *ws);
+ int (*sis_memory_write) (uint32 addr,
+ const unsigned char *data, uint32 length);
+ int (*sis_memory_read) (uint32 addr, char *data,
+ uint32 length);
+};
+
+extern const struct memsys *ms;
--
1.9.1
^ permalink raw reply [flat|nested] 34+ messages in thread
* [PATCH v3 01/14] sim/erc32: Added -v command line switch for verbose output
2015-03-01 21:10 [PATCH v3 00/14] Update of the SPARC SIS simulator Jiri Gaisler
` (6 preceding siblings ...)
2015-03-01 21:11 ` [PATCH v3 08/14] sim/erc32: Access memory subsystem through struct memsys Jiri Gaisler
@ 2015-03-01 21:11 ` Jiri Gaisler
2015-03-02 0:59 ` Mike Frysinger
2015-03-01 21:11 ` [PATCH v3 13/14] sim/erc32: Add data watchpoint support Jiri Gaisler
` (5 subsequent siblings)
13 siblings, 1 reply; 34+ messages in thread
From: Jiri Gaisler @ 2015-03-01 21:11 UTC (permalink / raw)
To: gdb-patches; +Cc: Jiri Gaisler
* help.c (usage) : update usage help print-out
* sis.c (run_sim) : increase debug level with -v. Also print
simulation time in long long format.
---
sim/erc32/func.c | 5 +++--
sim/erc32/help.c | 2 +-
sim/erc32/sis.c | 9 ++++++---
sim/erc32/sis.h | 8 +++-----
4 files changed, 13 insertions(+), 11 deletions(-)
diff --git a/sim/erc32/func.c b/sim/erc32/func.c
index 5123863..e324b57 100644
--- a/sim/erc32/func.c
+++ b/sim/erc32/func.c
@@ -29,6 +29,7 @@
#include "end.h"
#include <dis-asm.h>
#include "sim-config.h"
+#include <inttypes.h>
#define VAL(x) strtoul(x,(char **)NULL,0)
@@ -643,8 +644,8 @@ show_stat(sregs)
sregs->nbranch;
#endif
- printf("\n Cycles : %9d\n\r", ebase.simtime - sregs->simstart);
- printf(" Instructions : %9d\n", sregs->ninst);
+ printf("\n Cycles : %9" PRIu64 "\n\r", ebase.simtime - sregs->simstart);
+ printf(" Instructions : %9" PRIu64 "\n", sregs->ninst);
#ifdef STAT
printf(" integer : %9.2f %%\n", 100.0 * (float) iinst / (float) sregs->ninst);
diff --git a/sim/erc32/help.c b/sim/erc32/help.c
index 21c2a77..9813bda 100644
--- a/sim/erc32/help.c
+++ b/sim/erc32/help.c
@@ -7,8 +7,8 @@ usage()
{
printf("usage: sis [-uart1 uart_device1] [-uart2 uart_device2]\n");
+ printf("[-sparclite] [-dumbio] [-v] \n");
printf("[-nfp] [-freq frequency] [-c batch_file] [files]\n");
- printf("[-sparclite] [-dumbio]\n");
}
void
diff --git a/sim/erc32/sis.c b/sim/erc32/sis.c
index ce9b3d0..931e3f3 100644
--- a/sim/erc32/sis.c
+++ b/sim/erc32/sis.c
@@ -30,6 +30,7 @@
#include "sis.h"
#include <dis-asm.h>
#include "sim-config.h"
+#include <inttypes.h>
#define VAL(x) strtol(x,(char **)NULL,0)
@@ -113,7 +114,7 @@ run_sim(sregs, icount, dis)
sregs->histind = 0;
}
if (dis) {
- printf(" %8u ", ebase.simtime);
+ printf(" %8" PRIu64 " ", ebase.simtime);
dis_mem(sregs->pc, 1, &dinfo);
}
}
@@ -205,6 +206,8 @@ main(argc, argv)
#endif
} else if (strcmp(argv[stat], "-dumbio") == 0) {
dumbio = 1;
+ } else if (strcmp(argv[stat], "-v") == 0) {
+ sis_verbose += 1;
} else {
printf("unknown option %s\n", argv[stat]);
usage();
@@ -271,7 +274,7 @@ main(argc, argv)
case CTRL_C:
printf("\b\bInterrupt!\n");
case TIME_OUT:
- printf(" Stopped at time %d (%.3f ms)\n", ebase.simtime,
+ printf(" Stopped at time %" PRIu64 " (%.3f ms)\n", ebase.simtime,
((double) ebase.simtime / (double) sregs.freq) / 1000.0);
break;
case BPT_HIT:
@@ -281,7 +284,7 @@ main(argc, argv)
case ERROR:
printf("IU in error mode (%d)\n", sregs.trap);
stat = 0;
- printf(" %8d ", ebase.simtime);
+ printf(" %8" PRIu64 " ", ebase.simtime);
dis_mem(sregs.pc, 1, &dinfo);
break;
default:
diff --git a/sim/erc32/sis.h b/sim/erc32/sis.h
index dc02c65..c4d50da 100644
--- a/sim/erc32/sis.h
+++ b/sim/erc32/sis.h
@@ -23,6 +23,7 @@
#include "ansidecl.h"
#include "gdb/callback.h"
#include "gdb/remote-sim.h"
+#include <stdint.h>
#include "end.h"
@@ -51,11 +52,8 @@ typedef unsigned int uint32; /* 32-bit unsigned int */
typedef float float32; /* 32-bit float */
typedef double float64; /* 64-bit float */
-/* FIXME: what about host compilers that don't support 64-bit ints? */
-typedef unsigned long long uint64; /* 64-bit unsigned int */
-typedef long long int64; /* 64-bit signed int */
-
-#define UINT64_MAX 18446744073709551615ULL
+typedef uint64_t uint64; /* 64-bit unsigned int */
+typedef int64_t int64; /* 64-bit signed int */
struct pstate {
--
1.9.1
^ permalink raw reply [flat|nested] 34+ messages in thread
* [PATCH v3 11/14] sim/erc32: Add support for LEON2 processor emulation.
2015-03-01 21:10 [PATCH v3 00/14] Update of the SPARC SIS simulator Jiri Gaisler
` (8 preceding siblings ...)
2015-03-01 21:11 ` [PATCH v3 13/14] sim/erc32: Add data watchpoint support Jiri Gaisler
@ 2015-03-01 21:11 ` Jiri Gaisler
2015-03-01 21:11 ` [PATCH v3 07/14] sim/erc32: Use gdb callback for UART I/O when linked with gdb Jiri Gaisler
` (3 subsequent siblings)
13 siblings, 0 replies; 34+ messages in thread
From: Jiri Gaisler @ 2015-03-01 21:11 UTC (permalink / raw)
To: gdb-patches; +Cc: Jiri Gaisler
Added memory and I/O sub-system to emulate a LEON2 processor.
The cache and MMU are not emulated but enough functionallity
is provided to run any RTEMS and BCC compiled application.
The code is based on leon3.c and modified to emulate the
LEON2 address space and peripheral operations.
---
sim/erc32/Makefile.in | 4 +-
sim/erc32/exec.c | 3 +
sim/erc32/interf.c | 11 +-
sim/erc32/leon2.c | 985 ++++++++++++++++++++++++++++++++++++++++++++++++++
sim/erc32/sis.c | 7 +
sim/erc32/sis.h | 4 +
6 files changed, 1010 insertions(+), 4 deletions(-)
create mode 100644 sim/erc32/leon2.c
diff --git a/sim/erc32/Makefile.in b/sim/erc32/Makefile.in
index e40eb79..bee357b 100644
--- a/sim/erc32/Makefile.in
+++ b/sim/erc32/Makefile.in
@@ -21,7 +21,7 @@
TERMCAP_LIB = @TERMCAP@
READLINE_LIB = @READLINE@
-SIM_OBJS = exec.o erc32.o func.o help.o float.o interf.o leon3.o grlib.o
+SIM_OBJS = exec.o erc32.o func.o help.o float.o interf.o leon2.o leon3.o grlib.o
SIM_EXTRA_LIBS = $(READLINE_LIB) $(TERMCAP_LIB) -lm
SIM_EXTRA_ALL = sis
SIM_EXTRA_INSTALL = install-sis
@@ -35,7 +35,7 @@ SIM_EXTRA_CFLAGS = -DFAST_UART -I$(srcroot)
## COMMON_POST_CONFIG_FRAG
# `sis' doesn't need interf.o.
-SIS_OFILES = exec.o erc32.o func.o help.o float.o grlib.o leon3.o
+SIS_OFILES = exec.o erc32.o func.o help.o float.o grlib.o leon2.o leon3.o
sis: sis.o $(SIS_OFILES) $(COMMON_OBJS) $(LIBDEPS)
$(CC) $(ALL_CFLAGS) -o sis \
diff --git a/sim/erc32/exec.c b/sim/erc32/exec.c
index 4f2ebb1..a2d0e50 100644
--- a/sim/erc32/exec.c
+++ b/sim/erc32/exec.c
@@ -2207,6 +2207,9 @@ init_regs(sregs)
if (cputype == CPU_LEON3)
sregs->psr |= 0xF3000080; /* Set supervisor bit */
else
+ if (cputype == CPU_LEON2)
+ sregs->psr |= 0x00000080; /* Set supervisor bit */
+ else
sregs->psr |= 0x11000080; /* Set supervisor bit */
sregs->breakpoint = 0;
sregs->annul = 0;
diff --git a/sim/erc32/interf.c b/sim/erc32/interf.c
index 0172a01..858a77c 100644
--- a/sim/erc32/interf.c
+++ b/sim/erc32/interf.c
@@ -188,6 +188,10 @@ sim_open (kind, callback, abfd, argv)
if (strcmp(argv[stat], "-nouartrx") == 0) {
nouartrx = 1;
} else
+ if (strcmp(argv[stat], "-leon2") == 0) {
+ ms = &leon2;
+ cputype = CPU_LEON2;
+ } else
if (strcmp(argv[stat], "-leon3") == 0) {
ms = &leon3;
cputype = CPU_LEON3;
@@ -229,15 +233,18 @@ sim_open (kind, callback, abfd, argv)
stat++;
}
- if (cputype == CPU_LEON3)
+ if ((cputype == CPU_LEON3) || (cputype == CPU_LEON2))
sregs.freq = freq ? freq : 50;
else
sregs.freq = freq ? freq : 14;
if (sis_verbose) {
(*sim_callback->printf_filtered) (sim_callback, "\n SIS - SPARC instruction simulator %s\n", sis_version);
- (*sim_callback->printf_filtered) (sim_callback, " Bug-reports to Jiri Gaisler ESA/ESTEC (jiri@gaisler.se)\n\n");
+ (*sim_callback->printf_filtered) (sim_callback, " Bug-reports to Jiri Gaisler (jiri@gaisler.se)\n\n");
switch (cputype) {
+ case CPU_LEON2:
+ (*sim_callback->printf_filtered) (sim_callback, "LEON2 emulation enabled\n");
+ break;
case CPU_LEON3:
(*sim_callback->printf_filtered) (sim_callback, "LEON3 emulation enabled\n");
break;
diff --git a/sim/erc32/leon2.c b/sim/erc32/leon2.c
new file mode 100644
index 0000000..d56bd3d
--- /dev/null
+++ b/sim/erc32/leon2.c
@@ -0,0 +1,985 @@
+/*
+ * This file is part of SIS.
+ *
+ * SIS, SPARC instruction simulator V2.5 Copyright (C) 1995 Jiri Gaisler,
+ * European Space Agency
+ *
+ * This program is free software; you can redistribute it and/or modify it under
+ * the terms of the GNU General Public License as published by the Free
+ * Software Foundation; either version 3 of the License, or (at your option)
+ * any later version.
+ *
+ * This program is distributed in the hope that it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program; if not, see <http://www.gnu.org/licenses/>.
+ *
+ * Leon2 emulation, based on leon3.c.
+ */
+
+/* The control space devices. */
+
+#include "config.h"
+#include <errno.h>
+#include <sys/types.h>
+#include <stdio.h>
+#include <string.h>
+#include <termios.h>
+#include <sys/fcntl.h>
+#include <sys/file.h>
+#include <unistd.h>
+#include "sis.h"
+#include "sim-config.h"
+
+static int tty_setup = 1;
+
+/* APB registers */
+#define APBSTART 0x80000000
+#define APBEND 0x80000100
+
+/* Memory exception waitstates */
+#define MEM_EX_WS 1
+
+#define MOK 0
+
+/* LEON2 APB register addresses */
+
+#define IRQCTRL_IPR 0x094
+#define IRQCTRL_IMR 0x090
+#define IRQCTRL_ICR 0x09C
+#define IRQCTRL_IFR 0x098
+#define TIMER_SCALER 0x060
+#define TIMER_SCLOAD 0x064
+#define LEON2_CONFIG 0x024
+#define TIMER_TIMER1 0x040
+#define TIMER_RELOAD1 0x044
+#define TIMER_CTRL1 0x048
+#define TIMER_TIMER2 0x050
+#define TIMER_RELOAD2 0x054
+#define TIMER_CTRL2 0x058
+#define CACHE_CTRL 0x014
+#define POWER_DOWN 0x018
+
+#define APBUART_RXTX 0x070
+#define APBUART_STATUS 0x074
+
+/* Size of UART buffers (bytes). */
+#define UARTBUF 1024
+
+/* Number of simulator ticks between flushing the UARTS. */
+/* For good performance, keep above 1000. */
+#define UART_FLUSH_TIME 3000
+
+/* New uart defines. */
+#define UART_TX_TIME 1000
+#define UART_RX_TIME 1000
+#define UARTA_DR 0x1
+#define UARTA_SRE 0x2
+#define UARTA_HRE 0x4
+#define UARTA_OR 0x10
+
+/* IRQCTRL registers. */
+
+static uint32 irqctrl_ipr;
+static uint32 irqctrl_imr;
+static uint32 irqctrl_ifr;
+
+/* TIMER registers. */
+
+#define NTIMERS 2
+#define TIMER_IRQ 8
+
+static uint32 gpt_scaler;
+static uint32 gpt_scaler_start;
+static uint32 gpt_counter[NTIMERS];
+static uint32 gpt_reload[NTIMERS];
+static uint32 gpt_ctrl[NTIMERS];
+
+/* ROM size 16 Mbyte. */
+#define ROM_START 0x00000000
+#define ROM_MASK 0x00ffffff
+#define ROM_END (ROM_START + ROM_MASK + 1)
+
+/* RAM size 16 Mbyte. */
+#define RAM_START 0x40000000
+#define RAM_MASK 0x00ffffff
+#define RAM_END (RAM_START + RAM_MASK + 1)
+
+/* Memory. */
+
+static unsigned char romb[ROM_END - ROM_START];
+static unsigned char ramb[RAM_END - RAM_START];
+static uint32 cache_ctrl;
+
+
+/* UART support variables. */
+
+/* File descriptor for input file. */
+static int32 fd1, fd2;
+/* UART status register. */
+static int32 Ucontrol;
+
+static unsigned char aq[UARTBUF], bq[UARTBUF];
+static int32 anum, aind = 0;
+static int32 bnum, bind = 0;
+static char wbufa[UARTBUF], wbufb[UARTBUF];
+static unsigned wnuma;
+static unsigned wnumb;
+static FILE *f1in, *f1out;
+static struct termios ioc1, ioc2, iocold1, iocold2;
+static int f1open = 0;
+
+static char uarta_sreg, uarta_hreg;
+static uint32 uart_stat_reg;
+static uint32 uarta_data;
+
+/* Forward declarations. */
+
+static void mem_init (void);
+static void close_port (void);
+static void leon2_reset (void);
+static void irqctrl_intack (int32 level);
+static void chk_irq (void);
+static void set_irq (int32 level);
+static int32 apb_read (uint32 addr, uint32 *data);
+static int apb_write (uint32 addr, uint32 data);
+static void port_init (void);
+static uint32 grlib_read_uart (uint32 addr);
+static void grlib_write_uart (uint32 addr, uint32 data);
+static void flush_uart (void);
+static void uarta_tx (void);
+static void uart_rx (caddr_t arg);
+static void uart_intr (caddr_t arg);
+static void uart_irq_start (void);
+static void gpt_intr (caddr_t arg);
+static void gpt_init (void);
+static void gpt_reset (void);
+static void gpt_scaler_set (uint32 val);
+static void timer_ctrl (uint32 val, int i);
+static unsigned char *
+ get_mem_ptr (uint32 addr, uint32 size);
+static void store_bytes (unsigned char *mem, uint32 waddr,
+ uint32 *data, int sz, int32 *ws);
+
+static host_callback *callback;
+
+
+/* One-time init. */
+
+static void
+init_sim(void)
+{
+ callback = sim_callback;
+ grlib_init();
+ mem_init();
+ port_init();
+ gpt_init();
+}
+
+/* Power-on reset init. */
+
+static void
+reset(void)
+{
+ leon2_reset();
+ uart_irq_start();
+ gpt_reset();
+}
+
+/* IU error mode manager. */
+
+static void
+error_mode(pc)
+ uint32 pc;
+{
+
+}
+
+
+/* Memory init. */
+
+static void
+mem_init(void)
+{
+
+ if (sis_verbose)
+ printf("RAM start: 0x%x, RAM size: %d K, ROM size: %d K\n",
+ RAM_START, (RAM_MASK+1)/1024, (ROM_MASK+1)/1024);
+}
+
+/* Flush ports when simulator stops. */
+
+static void
+sim_halt(void)
+{
+#ifdef FAST_UART
+ flush_uart();
+#endif
+}
+
+static void
+close_port(void)
+{
+ if (f1open && f1in != stdin)
+ fclose(f1in);
+}
+
+static void
+exit_sim(void)
+{
+ close_port();
+}
+
+static void
+leon2_reset(void)
+{
+ int i;
+
+ irqctrl_ipr = 0;
+ irqctrl_imr = 0;
+ irqctrl_ifr = 0;
+
+ wnuma = wnumb = 0;
+ anum = aind = bnum = bind = 0;
+
+ uart_stat_reg = UARTA_SRE | UARTA_HRE;
+
+ gpt_counter[0] = 0xffffffff;
+ gpt_reload[0] = 0xffffffff;
+ gpt_scaler = 0xffff;
+ gpt_ctrl[0] = 0;
+ gpt_ctrl[1] = 0;
+
+}
+
+static void
+irqctrl_intack(int32 level)
+{
+ int irq_test;
+
+ if (sis_verbose > 2)
+ printf("interrupt %d acknowledged\n", level);
+ if (irqctrl_ifr & (1 << level))
+ irqctrl_ifr &= ~(1 << level);
+ else
+ irqctrl_ipr &= ~(1 << level);
+ chk_irq();
+}
+
+static void
+chk_irq(void)
+{
+ int32 i;
+ uint32 itmp;
+ int old_irl;
+
+ old_irl = ext_irl;
+ itmp = ((irqctrl_ipr | irqctrl_ifr) & irqctrl_imr) & 0x0fffe;
+ ext_irl = 0;
+ if (itmp != 0) {
+ for (i = 15; i > 0; i--) {
+ if (((itmp >> i) & 1) != 0) {
+ if ((sis_verbose > 2) && (i > old_irl))
+ printf("IU irl: %d\n", i);
+ ext_irl = i;
+ set_int(i, irqctrl_intack, i);
+ break;
+ }
+ }
+ }
+}
+
+static void
+set_irq(int32 level)
+{
+ irqctrl_ipr |= (1 << level);
+ chk_irq();
+}
+
+static int32
+apb_read(uint32 addr, uint32 *data)
+{
+
+ switch (addr & 0xfff) {
+
+ case APBUART_RXTX: /* 0x100 */
+ case APBUART_STATUS: /* 0x104 */
+ *data = grlib_read_uart(addr);
+ break;
+
+ case IRQCTRL_IPR: /* 0x204 */
+ *data = irqctrl_ipr;
+ break;
+
+ case IRQCTRL_IFR: /* 0x208 */
+ *data = irqctrl_ifr;
+ break;
+
+ case IRQCTRL_IMR: /* 0x240 */
+ *data = irqctrl_imr;
+ break;
+
+ case TIMER_SCALER: /* 0x300 */
+ *data = gpt_scaler - (now() - gpt_scaler_start);
+ break;
+
+ case TIMER_SCLOAD: /* 0x304 */
+ *data = gpt_scaler;
+ break;
+
+ case LEON2_CONFIG: /* 0x308 */
+ *data = 0x700310;
+ break;
+
+ case TIMER_TIMER1: /* 0x310 */
+ *data = gpt_counter[0];
+ break;
+
+ case TIMER_RELOAD1: /* 0x314 */
+ *data = gpt_reload[0];
+ break;
+
+ case TIMER_CTRL1: /* 0x318 */
+ *data = gpt_ctrl[0];
+ break;
+
+ case TIMER_TIMER2: /* 0x320 */
+ *data = gpt_counter[1];
+ break;
+
+ case TIMER_RELOAD2: /* 0x324 */
+ *data = gpt_reload[1];
+ break;
+
+ case TIMER_CTRL2: /* 0x328 */
+ *data = gpt_ctrl[1];
+ break;
+
+ case CACHE_CTRL: /* 0x328 */
+ *data = cache_ctrl;
+ break;
+
+ default:
+ *data = 0;
+ break;
+ }
+
+ if (sis_verbose > 1)
+ printf("APB read a: %08x, d: %08x\n", addr, *data);
+
+ return (MOK);
+}
+
+static int
+apb_write(uint32 addr, uint32 data)
+{
+ if (sis_verbose > 1)
+ printf("APB write a: %08x, d: %08x\n",addr,data);
+ switch (addr & 0xff) {
+
+ case APBUART_RXTX: /* 0x100 */
+ case APBUART_STATUS: /* 0x104 */
+ grlib_write_uart(addr, data);
+ break;
+
+ case IRQCTRL_IFR: /* 0x208 */
+ irqctrl_ifr = data & 0xfffe;
+ chk_irq();
+ break;
+
+ case IRQCTRL_ICR: /* 0x20C */
+ irqctrl_ipr &= ~data & 0x0fffe;
+ chk_irq();
+ break;
+
+ case IRQCTRL_IMR: /* 0x240 */
+ irqctrl_imr = data & 0x7ffe;
+ chk_irq();
+ break;
+
+ case TIMER_SCLOAD: /* 0x304 */
+ gpt_scaler_set(data);
+ break;
+
+ case TIMER_TIMER1: /* 0x310 */
+ gpt_counter[0] = data;
+ break;
+
+ case TIMER_RELOAD1: /* 0x314 */
+ gpt_reload[0] = data;
+ break;
+
+ case TIMER_CTRL1: /* 0x318 */
+ timer_ctrl(data, 0);
+ break;
+
+ case TIMER_TIMER2: /* 0x320 */
+ gpt_counter[1] = data;
+ break;
+
+ case TIMER_RELOAD2: /* 0x324 */
+ gpt_reload[1] = data;
+ break;
+
+ case TIMER_CTRL2: /* 0x328 */
+ timer_ctrl(data, 1);
+ break;
+
+ case POWER_DOWN: /* 0x328 */
+ wait_for_irq();
+ break;
+
+ case CACHE_CTRL: /* 0x328 */
+ cache_ctrl = data & 0x1000f;
+ break;
+
+ default:
+ break;
+ }
+ return (MOK);
+}
+
+
+/* APBUART. */
+
+static int ifd1 = -1, ofd1 = -1;
+
+static void
+init_stdio(void)
+{
+ if (dumbio)
+ return;
+ if (ifd1 == 0 && f1open) {
+ tcsetattr(0, TCSANOW, &ioc1);
+ tcflush(ifd1, TCIFLUSH);
+ }
+}
+
+static void
+restore_stdio(void)
+{
+ if (dumbio)
+ return;
+ if (ifd1 == 0 && f1open && tty_setup)
+ tcsetattr(0, TCSANOW, &iocold1);
+}
+
+#define DO_STDIO_READ( _fd_, _buf_, _len_ ) \
+ ( dumbio || nouartrx \
+ ? (0) /* no bytes read, no delay */ \
+ : (_fd_) == 1 && callback ? \
+ callback->read_stdin (callback, _buf_, _len_) : \
+ read( _fd_, _buf_, _len_ ) )
+
+static void
+port_init(void)
+{
+
+ f1in = stdin;
+ f1out = stdout;
+ if (uart_dev1[0] != 0)
+ if ((fd1 = open(uart_dev1, O_RDWR | O_NONBLOCK)) < 0) {
+ printf("Warning, couldn't open output device %s\n", uart_dev1);
+ } else {
+ if (sis_verbose)
+ printf("serial port A on %s\n", uart_dev1);
+ f1in = f1out = fdopen(fd1, "r+");
+ setbuf(f1out, NULL);
+ f1open = 1;
+ }
+ if (f1in) ifd1 = fileno(f1in);
+ if (ifd1 == 0) {
+ if (callback && !callback->isatty(callback, ifd1)) {
+ tty_setup = 0;
+ }
+ if (sis_verbose)
+ printf("serial port A on stdin/stdout\n");
+ if (!dumbio) {
+ tcgetattr(ifd1, &ioc1);
+ if (tty_setup) {
+ iocold1 = ioc1;
+ ioc1.c_lflag &= ~(ICANON | ECHO);
+ ioc1.c_cc[VMIN] = 0;
+ ioc1.c_cc[VTIME] = 0;
+ }
+ }
+ f1open = 1;
+ }
+
+ if (f1out) {
+ ofd1 = fileno(f1out);
+ if (!dumbio && tty_setup && ofd1 == 1) setbuf(f1out, NULL);
+ }
+
+ wnuma = 0;
+
+}
+
+static uint32
+grlib_read_uart(uint32 addr)
+{
+
+ unsigned tmp;
+
+ tmp = 0;
+ switch (addr & 0xfff) {
+
+ case 0x070: /* UART 1 RX/TX */
+#ifndef _WIN32
+#ifdef FAST_UART
+
+ if (aind < anum) {
+ if ((aind + 1) < anum)
+ set_irq(3);
+ return ((uint32) aq[aind++]);
+ } else {
+ if (f1open) {
+ anum = DO_STDIO_READ(ifd1, aq, UARTBUF);
+ }
+ else {
+ anum = 0;
+ }
+ if (anum > 0) {
+ aind = 0;
+ if ((aind + 1) < anum)
+ set_irq(3);
+ return ((uint32) aq[aind++]);
+ } else {
+ return ((uint32) aq[aind]);
+ }
+
+ }
+#else
+ tmp = uarta_data;
+ uarta_data &= ~UART_DR;
+ uart_stat_reg &= ~UARTA_DR;
+ return tmp;
+#endif
+#else
+ return(0);
+#endif
+ break;
+
+ case 0x074: /* UART status register */
+#ifndef _WIN32
+#ifdef FAST_UART
+
+ Ucontrol = 0;
+ if (aind < anum) {
+ Ucontrol |= 0x00000001;
+ } else {
+ if (f1open) {
+ anum = DO_STDIO_READ(ifd1, aq, UARTBUF);
+ }
+ else {
+ anum = 0;
+ }
+ if (anum > 0) {
+ Ucontrol |= 0x00000001;
+ aind = 0;
+ set_irq(3);
+ }
+ }
+ Ucontrol |= 0x00000006;
+ return (Ucontrol);
+#else
+ return (uart_stat_reg);
+#endif
+#else
+ return(0x00060006);
+#endif
+ break;
+ default:
+ if (sis_verbose)
+ printf("Read from unimplemented LEON2 register (%x)\n", addr);
+
+ }
+ return (0);
+}
+
+static void
+grlib_write_uart(uint32 addr, uint32 data)
+{
+ unsigned char c;
+
+ c = (unsigned char) data;
+ switch (addr & 0xfff) {
+
+ case 0x070: /* UART A */
+#ifdef FAST_UART
+ if (f1open) {
+ if (wnuma < UARTBUF)
+ wbufa[wnuma++] = c;
+ else {
+ while (wnuma) {
+ if (ofd1 == 1 && callback)
+ wnuma -= callback->write_stdout(callback, wbufa, wnuma);
+ else
+ wnuma -= fwrite(wbufa, 1, wnuma, f1out);
+ }
+ wbufa[wnuma++] = c;
+ }
+ }
+ set_irq(3);
+#else
+ if (uart_stat_reg & UARTA_SRE) {
+ uarta_sreg = c;
+ uart_stat_reg &= ~UARTA_SRE;
+ event(uarta_tx, 0, UART_TX_TIME);
+ } else {
+ uarta_hreg = c;
+ uart_stat_reg &= ~UARTA_HRE;
+ }
+#endif
+ break;
+
+ case 0x074: /* UART status register */
+#ifndef FAST_UART
+ uart_stat_reg &= 1;
+#endif
+ break;
+ default:
+ if (sis_verbose)
+ printf("Write to unimplemented APB register (%x)\n", addr);
+
+ }
+}
+
+static void
+flush_uart(void)
+{
+ while (wnuma && f1open) {
+ if (ofd1 == 1 && callback) {
+ wnuma -= callback->write_stdout(callback, wbufa, wnuma);
+ callback->flush_stdout(callback);
+ }
+ else
+ wnuma -= fwrite(wbufa, 1, wnuma, f1out);
+ }
+}
+
+static void
+uarta_tx(void)
+{
+ while (f1open) {
+ if (ofd1 == 1 && callback) {
+ while (callback->write_stdout(callback, &uarta_sreg, 1) != 1);
+ }
+ else {
+ while (fwrite(&uarta_sreg, 1, 1, f1out) != 1);
+ }
+ }
+ if (uart_stat_reg & UARTA_HRE) {
+ uart_stat_reg |= UARTA_SRE;
+ } else {
+ uarta_sreg = uarta_hreg;
+ uart_stat_reg |= UARTA_HRE;
+ event(uarta_tx, 0, UART_TX_TIME);
+ }
+ set_irq(3);
+}
+
+static void
+uart_rx(caddr_t arg)
+{
+ int32 rsize;
+ char rxd;
+
+ rsize = 0;
+ if (f1open)
+ rsize = DO_STDIO_READ(ifd1, &rxd, 1);
+ else
+ rsize = 0;
+ if (rsize > 0) {
+ uarta_data = rxd;
+ if (uart_stat_reg & UARTA_DR) {
+ uart_stat_reg |= UARTA_OR;
+ }
+ uart_stat_reg |= UARTA_DR;
+ set_irq(3);
+ }
+ event(uart_rx, 0, UART_RX_TIME);
+}
+
+static void
+uart_intr(caddr_t arg)
+{
+ /* Check for UART interrupts every 1000 clk. */
+ grlib_read_uart(APBUART_STATUS);
+ flush_uart();
+ event(uart_intr, 0, UART_FLUSH_TIME);
+}
+
+
+static void
+uart_irq_start(void)
+{
+#ifdef FAST_UART
+ event(uart_intr, 0, UART_FLUSH_TIME);
+#else
+#ifndef _WIN32
+ event(uart_rx, 0, UART_RX_TIME);
+#endif
+#endif
+}
+
+/* TIMER */
+
+static void
+gpt_intr(caddr_t arg)
+{
+ int i;
+
+ for (i=0; i<NTIMERS; i++) {
+ if (gpt_ctrl[i] & 1) {
+ gpt_counter[i] -= 1;
+ if (gpt_counter[i] == -1) {
+ set_irq(TIMER_IRQ + i);
+ if (gpt_ctrl[i] & 2)
+ gpt_counter[i] = gpt_reload[i];
+ }
+ }
+ }
+ event(gpt_intr, 0, gpt_scaler + 1);
+ gpt_scaler_start = now();
+}
+
+static void
+gpt_init(void)
+{
+ if (sis_verbose)
+ printf("GPT started (period %d)\n\r", gpt_scaler + 1);
+}
+
+static void
+gpt_reset(void)
+{
+ event(gpt_intr, 0, gpt_scaler + 1);
+ gpt_scaler_start = now();
+}
+
+static void
+gpt_scaler_set(uint32 val)
+{
+ gpt_scaler = val & 0x0ffff; /* 16-bit scaler */
+}
+
+static void
+timer_ctrl(uint32 val, int i)
+{
+ if (val & 4) { /* reload */
+ gpt_counter[i] = gpt_reload[i];
+ }
+ gpt_ctrl[i] = val & 0xb;
+}
+
+/* Store data in host byte order. MEM points to the beginning of the
+ emulated memory; WADDR contains the index the emulated memory,
+ DATA points to words in host byte order to be stored. SZ contains log(2)
+ of the number of bytes to retrieve, and can be 0 (1 byte), 1 (one half-word),
+ 2 (one word), or 3 (two words); WS should return the number of wait-states. */
+
+static void
+store_bytes (unsigned char *mem, uint32 waddr, uint32 *data, int32 sz, int32 *ws)
+{
+ switch (sz) {
+ case 0:
+#ifdef HOST_LITTLE_ENDIAN
+ waddr ^= 3;
+#endif
+ mem[waddr] = *data & 0x0ff;
+ *ws = 0;
+ break;
+ case 1:
+#ifdef HOST_LITTLE_ENDIAN
+ waddr ^= 2;
+#endif
+ memcpy(&mem[waddr], data, 2);
+ *ws = 0;
+ break;
+ case 2:
+ memcpy(&mem[waddr], data, 4);
+ *ws = 0;
+ break;
+ case 3:
+ memcpy(&mem[waddr], data, 8);
+ *ws = 0;
+ break;
+ }
+}
+
+
+/* Memory emulation. */
+
+static int
+memory_iread(uint32 addr, uint32 *data, int32 *ws)
+{
+ if ((addr >= RAM_START) && (addr < RAM_END)) {
+ memcpy(data, &ramb[addr & RAM_MASK], 4);
+ *ws = 0;
+ return (0);
+ } else if (addr < ROM_END) {
+ memcpy(data, &romb[addr], 4);
+ *ws = 0;
+ return (0);
+ }
+
+ printf("Memory exception at %x (illegal address)\n", addr);
+ *ws = MEM_EX_WS;
+ return (1);
+}
+
+static int
+memory_read(uint32 addr, uint32 *data, int32 sz, int32 *ws)
+{
+ int32 mexc;
+
+ if ((addr >= RAM_START) && (addr < RAM_END)) {
+ memcpy(data, &ramb[addr & RAM_MASK & ~3], 4);
+ *ws = 0;
+ return 0;
+ } else if ((addr >= APBSTART) && (addr < APBEND)) {
+ mexc = apb_read(addr, data);
+ if (mexc) {
+ *ws = MEM_EX_WS;
+ } else {
+ *ws = 0;
+ }
+ return (mexc);
+ } else if (addr < ROM_END) {
+ memcpy(data, &romb[addr & ~3], 4);
+ *ws = 0;
+ return 0;
+ }
+
+ printf("Memory exception at %x (illegal address)\n", addr);
+ *ws = MEM_EX_WS;
+ return 1;
+}
+
+static int
+memory_read_asi(int32 asi, uint32 addr, uint32 *data, int32 sz, int32 *ws)
+{
+ return(memory_read(addr, data, sz, ws));
+}
+
+static int
+memory_write(uint32 addr, uint32 *data, int32 sz, int32 *ws)
+{
+ uint32 byte_addr;
+ uint32 byte_mask;
+ uint32 waddr;
+ uint32 *ram;
+ int32 mexc;
+ int i;
+ int wphit[2];
+
+ if ((addr >= RAM_START) && (addr < RAM_END)) {
+ waddr = addr & RAM_MASK;
+ store_bytes (ramb, waddr, data, sz, ws);
+ return 0;
+
+ } else if ((addr >= APBSTART) && (addr < APBEND)) {
+ if (sz != 2) {
+ *ws = MEM_EX_WS;
+ return 1;
+ }
+ apb_write(addr, *data);
+ *ws = 0;
+ return 0;
+
+ } else if (addr < ROM_END) {
+ *ws = 0;
+ store_bytes (romb, addr, data, sz, ws);
+ return 0;
+ }
+
+ *ws = MEM_EX_WS;
+ return 1;
+}
+
+static int
+memory_write_asi(int32 asi, uint32 addr, uint32 *data, int32 sz, int32 *ws)
+{
+ return(memory_write(addr, data, sz, ws));
+}
+
+static unsigned char *
+get_mem_ptr(uint32 addr, uint32 size)
+{
+ if ((addr + size) < ROM_END) {
+ return (&romb[addr]);
+ } else if ((addr >= RAM_START) && ((addr + size) < RAM_END)) {
+ return (&ramb[addr & RAM_MASK]);
+ }
+
+ return ((char *) -1);
+}
+
+static int
+sis_memory_write(uint32 addr, const unsigned char *data, uint32 length)
+{
+ char *mem;
+
+ if ((mem = get_mem_ptr(addr, length)) == ((char *) -1))
+ return (0);
+
+ memcpy(mem, data, length);
+ return (length);
+}
+
+static int
+sis_memory_read(uint32 addr, char *data, uint32 length)
+{
+ char *mem;
+ int ws;
+
+ if (length == 4) {
+ memory_read(addr, (uint32 *) data, length, &ws);
+ return 4;
+ }
+
+ if ((mem = get_mem_ptr(addr, length)) == ((char *) -1))
+ return 0;
+
+ memcpy(data, mem, length);
+ return (length);
+}
+
+static void
+boot_init (void)
+{
+ /* Generate 1 MHz RTC tick. */
+ apb_write(TIMER_SCALER, sregs.freq-1);
+ apb_write(TIMER_SCLOAD, sregs.freq-1);
+ apb_write(TIMER_TIMER1, -1);
+ apb_write(TIMER_RELOAD1, -1);
+ apb_write(TIMER_CTRL1, 0x7);
+
+ sregs.wim = 2;
+ sregs.psr = 0x000010e0;
+ sregs.r[30] = RAM_END;
+ sregs.r[14] = sregs.r[30] - 96*4;
+ cache_ctrl = 0x01000f;
+}
+
+const struct memsys leon2 = {
+ init_sim,
+ reset,
+ error_mode,
+ sim_halt,
+ exit_sim,
+ init_stdio,
+ restore_stdio,
+ memory_iread,
+ memory_read,
+ memory_read_asi,
+ memory_write,
+ memory_write_asi,
+ sis_memory_write,
+ sis_memory_read,
+ boot_init
+};
diff --git a/sim/erc32/sis.c b/sim/erc32/sis.c
index c41539a..b266361 100644
--- a/sim/erc32/sis.c
+++ b/sim/erc32/sis.c
@@ -181,6 +181,10 @@ main(argc, argv)
dumbio = 1;
} else if (strcmp(argv[stat], "-nouartrx") == 0) {
nouartrx = 1;
+ } else if (strcmp(argv[stat], "-leon2") == 0) {
+ ms = &leon2;
+ if (freq == 14) freq = 50;
+ cputype = CPU_LEON2;
} else if (strcmp(argv[stat], "-leon3") == 0) {
ms = &leon3;
if (freq == 14) freq = 50;
@@ -199,6 +203,9 @@ main(argc, argv)
}
switch (cputype) {
+ case CPU_LEON2:
+ printf(" LEON2 emulation enabled\n");
+ break;
case CPU_LEON3:
printf(" LEON3 emulation enabled\n");
break;
diff --git a/sim/erc32/sis.h b/sim/erc32/sis.h
index 464f389..6110192 100644
--- a/sim/erc32/sis.h
+++ b/sim/erc32/sis.h
@@ -182,6 +182,7 @@ struct memsys {
#define ERROR 3
#define CTRL_C 4
+#define CPU_LEON2 2
#define CPU_LEON3 3
/* Prototypes */
@@ -262,5 +263,8 @@ extern void gen_help (void);
extern const struct memsys *ms;
+/* leon2.c */
+extern const struct memsys leon2;
+
/* leon3.c */
extern const struct memsys leon3;
--
1.9.1
^ permalink raw reply [flat|nested] 34+ messages in thread
* [PATCH v3 14/14] Add watchpoint support to gdb simulator interface.
2015-03-01 21:10 [PATCH v3 00/14] Update of the SPARC SIS simulator Jiri Gaisler
` (12 preceding siblings ...)
2015-03-01 21:11 ` [PATCH v3 04/14] sim/erc32: use SIM_AC_OPTION_HOSTENDIAN to probe for host endianess Jiri Gaisler
@ 2015-03-01 21:11 ` Jiri Gaisler
13 siblings, 0 replies; 34+ messages in thread
From: Jiri Gaisler @ 2015-03-01 21:11 UTC (permalink / raw)
To: gdb-patches; +Cc: Jiri Gaisler
Currently, only the sparc sim supports watchpoints. Stubs for the
watchpoint functions were added to all other built-in sims
to avoid linking errors.
---
gdb/remote-sim.c | 69 +++++++++++++
include/gdb/remote-sim.h | 24 +++++
sim/arm/wrapper.c | 26 +++++
sim/avr/interp.c | 25 +++++
sim/bfin/Makefile.in | 1 +
sim/common/sim-watch-remote.c | 27 +++++
sim/cr16/interp.c | 26 +++++
sim/cris/Makefile.in | 1 +
sim/erc32/interf.c | 235 ++++++++++++++++++++++++++++++++----------
sim/frv/Makefile.in | 1 +
sim/h8300/Makefile.in | 1 +
sim/iq2000/Makefile.in | 1 +
sim/lm32/Makefile.in | 1 +
sim/m32c/gdb-if.c | 26 +++++
sim/m32r/Makefile.in | 1 +
sim/m68hc11/Makefile.in | 1 +
sim/mcore/interp.c | 26 +++++
sim/microblaze/Makefile.in | 2 +-
sim/mips/Makefile.in | 1 +
sim/mn10300/Makefile.in | 1 +
sim/moxie/interp.c | 26 +++++
sim/msp430/Makefile.in | 1 +
sim/ppc/gdb-sim.c | 26 +++++
sim/rl78/gdb-if.c | 26 +++++
sim/rx/gdb-if.c | 26 +++++
sim/sh/interp.c | 26 +++++
sim/sh64/Makefile.in | 1 +
sim/v850/Makefile.in | 3 +-
28 files changed, 577 insertions(+), 54 deletions(-)
create mode 100644 sim/common/sim-watch-remote.c
diff --git a/gdb/remote-sim.c b/gdb/remote-sim.c
index fd2fd58..af17e85 100644
--- a/gdb/remote-sim.c
+++ b/gdb/remote-sim.c
@@ -1294,6 +1294,70 @@ gdbsim_has_memory (struct target_ops *ops)
return 1;
}
+static int
+gdbsim_insert_watchpoint (struct target_ops *self,
+ CORE_ADDR addr, int len, int type,
+ struct expression *cond)
+{
+ struct sim_inferior_data *sim_data
+ = get_sim_inferior_data (current_inferior (), SIM_INSTANCE_NEEDED);
+
+ if (remote_debug)
+ fprintf_unfiltered (gdb_stdlog, "gdbsim_insert_watchpoint: %d\n", type);
+
+ if (sim_set_watchpoint (sim_data->gdbsim_desc, addr, len, type) != SIM_RC_OK)
+ return -1;
+
+ return 0;
+}
+
+static int
+gdbsim_remove_watchpoint (struct target_ops *self,
+ CORE_ADDR addr, int len, int type,
+ struct expression *cond)
+{
+ struct sim_inferior_data *sim_data
+ = get_sim_inferior_data (current_inferior (), SIM_INSTANCE_NEEDED);
+
+ if (remote_debug)
+ fprintf_unfiltered (gdb_stdlog, "gdbsim_remove_watchpoint: %d\n", type);
+
+ if (sim_clear_watchpoint (sim_data->gdbsim_desc, addr, len, type) != SIM_RC_OK)
+ return -1;
+
+ return 0;
+}
+
+
+static int
+gdbsim_can_use_hw_breakpoint (struct target_ops *self,
+ int type, int cnt, int othertype)
+{
+ struct sim_inferior_data *sim_data
+ = get_sim_inferior_data (current_inferior (), SIM_INSTANCE_NEEDED);
+
+ return (sim_can_use_hw_breakpoint(sim_data->gdbsim_desc, type, cnt, othertype));
+}
+
+static int
+gdbsim_stopped_by_watchpoint (struct target_ops *ops)
+{
+ struct sim_inferior_data *sim_data
+ = get_sim_inferior_data (current_inferior (), SIM_INSTANCE_NEEDED);
+
+ return (sim_stopped_by_watchpoint(sim_data->gdbsim_desc));;
+}
+
+static int
+gdbsim_stopped_data_address (struct target_ops *ops, CORE_ADDR *addr)
+{
+ struct sim_inferior_data *sim_data
+ = get_sim_inferior_data (current_inferior (), SIM_INSTANCE_NEEDED);
+
+ *addr = sim_watchpoint_address(sim_data->gdbsim_desc);;
+ return (1);
+}
+
/* Define the target subroutine names. */
struct target_ops gdbsim_ops;
@@ -1316,6 +1380,11 @@ init_gdbsim_ops (void)
gdbsim_ops.to_files_info = gdbsim_files_info;
gdbsim_ops.to_insert_breakpoint = memory_insert_breakpoint;
gdbsim_ops.to_remove_breakpoint = memory_remove_breakpoint;
+ gdbsim_ops.to_insert_watchpoint = gdbsim_insert_watchpoint;
+ gdbsim_ops.to_remove_watchpoint = gdbsim_remove_watchpoint;
+ gdbsim_ops.to_stopped_by_watchpoint = gdbsim_stopped_by_watchpoint;
+ gdbsim_ops.to_can_use_hw_breakpoint = gdbsim_can_use_hw_breakpoint;
+ gdbsim_ops.to_stopped_data_address = gdbsim_stopped_data_address;
gdbsim_ops.to_kill = gdbsim_kill;
gdbsim_ops.to_load = gdbsim_load;
gdbsim_ops.to_create_inferior = gdbsim_create_inferior;
diff --git a/include/gdb/remote-sim.h b/include/gdb/remote-sim.h
index 3dca380..36fef3c 100644
--- a/include/gdb/remote-sim.h
+++ b/include/gdb/remote-sim.h
@@ -280,6 +280,30 @@ void sim_do_command (SIM_DESC sd, const char *cmd);
char **sim_complete_command (SIM_DESC sd, const char *text, const char *word);
+/* Add hardware watchpoint. See to_insert_watchpoint() in target.h
+ for description of parameters. */
+
+int sim_set_watchpoint (SIM_DESC sd, SIM_ADDR mem, int length, int type);
+
+/* Remove hardware watchpoint. See to_remove_watchpoint() in target.h
+ for description of parameters. */
+
+int sim_clear_watchpoint (SIM_DESC sd, SIM_ADDR mem, int length, int type);
+
+/* Returns data address when watchpoint has been hit. See
+ to_stopped_data_address() in target.h for description. */
+
+int sim_watchpoint_address (SIM_DESC sd);
+
+/* Returns 1 if simulator was stopped by watchpoint hit. */
+
+int sim_stopped_by_watchpoint(SIM_DESC sd);
+
+/* Returns non-zero if we can set a hardware watchpoint of type TYPE.
+ See to_can_use_hw_breakpoint() in target.h for details. */
+
+int sim_can_use_hw_breakpoint (SIM_DESC sd, int type, int cnt, int othertype);
+
#ifdef __cplusplus
}
#endif
diff --git a/sim/arm/wrapper.c b/sim/arm/wrapper.c
index 0ccc7fb..a4f6824 100644
--- a/sim/arm/wrapper.c
+++ b/sim/arm/wrapper.c
@@ -1016,3 +1016,29 @@ sim_complete_command (SIM_DESC sd, const char *text, const char *word)
{
return NULL;
}
+
+int sim_set_watchpoint (SIM_DESC sd, SIM_ADDR mem, int length, int type)
+{
+ return -1;
+}
+
+int sim_clear_watchpoint (SIM_DESC sd, SIM_ADDR mem, int length, int type)
+{
+ return -1;
+}
+
+int sim_stopped_by_watchpoint (SIM_DESC sd)
+{
+ return 0;
+}
+
+int sim_watchpoint_address (SIM_DESC sd)
+{
+ return 0;
+}
+
+int sim_can_use_hw_breakpoint (SIM_DESC sd, int type, int cnt, int othertype)
+{
+ return 0;
+}
+
diff --git a/sim/avr/interp.c b/sim/avr/interp.c
index 0df5155..ce21cb2 100644
--- a/sim/avr/interp.c
+++ b/sim/avr/interp.c
@@ -1853,3 +1853,28 @@ sim_complete_command (SIM_DESC sd, const char *text, const char *word)
{
return NULL;
}
+
+int sim_set_watchpoint (SIM_DESC sd, SIM_ADDR mem, int length, int type)
+{
+ return -1;
+}
+
+int sim_clear_watchpoint (SIM_DESC sd, SIM_ADDR mem, int length, int type)
+{
+ return -1;
+}
+
+int sim_stopped_by_watchpoint (SIM_DESC sd)
+{
+ return 0;
+}
+
+int sim_watchpoint_address (SIM_DESC sd)
+{
+ return 0;
+}
+
+int sim_can_use_hw_breakpoint (SIM_DESC sd, int type, int cnt, int othertype)
+{
+ return 0;
+}
diff --git a/sim/bfin/Makefile.in b/sim/bfin/Makefile.in
index b6cfeb5..d3fa401 100644
--- a/sim/bfin/Makefile.in
+++ b/sim/bfin/Makefile.in
@@ -39,6 +39,7 @@ SIM_OBJS = \
sim-reg.o \
sim-resume.o \
sim-stop.o \
+ sim-watch-remote.o \
@BFIN_SIM_EXTRA_OBJS@ \
$(SIM_EXTRA_OBJS)
diff --git a/sim/common/sim-watch-remote.c b/sim/common/sim-watch-remote.c
new file mode 100644
index 0000000..279bb06
--- /dev/null
+++ b/sim/common/sim-watch-remote.c
@@ -0,0 +1,27 @@
+
+#include "gdb/remote-sim.h"
+
+int sim_set_watchpoint (SIM_DESC sd, SIM_ADDR mem, int length, int type)
+{
+ return -1;
+}
+
+int sim_clear_watchpoint (SIM_DESC sd, SIM_ADDR mem, int length, int type)
+{
+ return -1;
+}
+
+int sim_stopped_by_watchpoint (SIM_DESC sd)
+{
+ return 0;
+}
+
+int sim_watchpoint_address (SIM_DESC sd)
+{
+ return 0;
+}
+
+int sim_can_use_hw_breakpoint (SIM_DESC sd, int type, int cnt, int othertype)
+{
+ return 0;
+}
diff --git a/sim/cr16/interp.c b/sim/cr16/interp.c
index 9c85948..4199579 100644
--- a/sim/cr16/interp.c
+++ b/sim/cr16/interp.c
@@ -1584,3 +1584,29 @@ sim_load (SIM_DESC sd, const char *prog, struct bfd *abfd, int from_tty)
prog_bfd_was_opened_p = abfd == NULL;
return SIM_RC_OK;
}
+
+int sim_set_watchpoint (SIM_DESC sd, SIM_ADDR mem, int length, int type)
+{
+ return -1;
+}
+
+int sim_clear_watchpoint (SIM_DESC sd, SIM_ADDR mem, int length, int type)
+{
+ return -1;
+}
+
+int sim_stopped_by_watchpoint (SIM_DESC sd)
+{
+ return 0;
+}
+
+int sim_watchpoint_address (SIM_DESC sd)
+{
+ return 0;
+}
+
+int sim_can_use_hw_breakpoint (SIM_DESC sd, int type, int cnt, int othertype)
+{
+ return 0;
+}
+
diff --git a/sim/cris/Makefile.in b/sim/cris/Makefile.in
index a4332c8..6607c32 100644
--- a/sim/cris/Makefile.in
+++ b/sim/cris/Makefile.in
@@ -30,6 +30,7 @@ SIM_OBJS = \
sim-hrw.o \
sim-model.o \
sim-reg.o \
+ sim-watch-remote.o \
cgen-utils.o cgen-trace.o cgen-scache.o \
cgen-run.o sim-reason.o sim-engine.o sim-stop.o \
sim-if.o arch.o \
diff --git a/sim/erc32/interf.c b/sim/erc32/interf.c
index 858a77c..e846b4c 100644
--- a/sim/erc32/interf.c
+++ b/sim/erc32/interf.c
@@ -36,8 +36,6 @@
#define PSR_CWP 0x7
-int sis_gdb_break = 1;
-
int
run_sim(sregs, icount, dis)
struct pstate *sregs;
@@ -52,38 +50,15 @@ run_sim(sregs, icount, dis)
ms->init_stdio();
sregs->starttime = get_time();
irq = 0;
+ if (sregs->err_mode) icount = 0;
if ((sregs->pc != 0) && (ebase.simtime == 0))
ms->boot_init();
- while (!sregs->err_mode & (icount > 0)) {
-
+ while (icount > 0) {
sregs->fhold = 0;
- sregs->hold = 0;
sregs->icnt = 1;
-
- if (sregs->psr & 0x080)
- sregs->asi = 8;
- else
- sregs->asi = 9;
-
-#if 0 /* DELETE ME! for debugging purposes only */
- if (sis_verbose > 1)
- if (sregs->pc == 0 || sregs->npc == 0)
- printf ("bogus pc or npc\n");
-#endif
mexc = ms->memory_iread(sregs->pc, &sregs->inst, &sregs->hold);
-#if 0 /* DELETE ME! for debugging purposes only */
- if (sis_verbose > 2)
- printf("pc %x, np %x, sp %x, fp %x, wm %x, cw %x, i %08x\n",
- sregs->pc, sregs->npc,
- sregs->r[(((sregs->psr & 7) << 4) + 14) & 0x7f],
- sregs->r[(((sregs->psr & 7) << 4) + 30) & 0x7f],
- sregs->wim,
- sregs->psr & 7,
- sregs->inst);
-#endif
if (sregs->annul) {
sregs->annul = 0;
- sregs->icnt = 1;
sregs->pc = sregs->npc;
sregs->npc = sregs->npc + 4;
} else {
@@ -92,47 +67,40 @@ run_sim(sregs, icount, dis)
if (mexc) {
sregs->trap = I_ACC_EXC;
} else {
- if ((sis_gdb_break) && (sregs->inst == 0x91d02001)) {
- if (sis_verbose)
- (*sim_callback->printf_filtered) (sim_callback,
- "SW BP hit at %x\n", sregs->pc);
- ms->sim_halt();
- ms->restore_stdio();
- clearerr(stdin);
- return (BPT_HIT);
- } else
- dispatch_instruction(sregs);
+ dispatch_instruction(sregs);
+ icount--;
}
- icount--;
}
if (sregs->trap) {
irq = 0;
- sregs->err_mode = execute_trap(sregs);
+ if ((sregs->err_mode = execute_trap(sregs)) == WPT_HIT) {
+ sregs->err_mode = 0;
+ sregs->trap = 0;
+ icount = 0;
+ }
+ if (sregs->err_mode) icount = 0;
+
}
}
advance_time(sregs);
- if (ctrl_c) {
+ if (ctrl_c)
icount = 0;
- }
}
ms->sim_halt();
sregs->tottime += get_time() - sregs->starttime;
ms->restore_stdio();
clearerr(stdin);
- if (sregs->err_mode)
+ if (sregs->err_mode) {
ms->error_mode(sregs->pc);
- if (sregs->err_mode)
return (ERROR);
- if (sregs->bphit) {
- if (sis_verbose)
- (*sim_callback->printf_filtered) (sim_callback,
- "HW BP hit at %x\n", sregs->pc);
- return (BPT_HIT);
}
if (ctrl_c) {
ctrl_c = 0;
+ sregs->wphit = sregs->bphit = 0;
return (CTRL_C);
}
+ if ((sregs->bphit) || (sregs->wphit))
+ return (BPT_HIT);
return (TIME_OUT);
}
@@ -162,6 +130,7 @@ sim_open (kind, callback, abfd, argv)
int freq = 0;
sim_callback = callback;
+ sis_gdb_break = 1;
while (argv[argc])
argc++;
@@ -414,12 +383,15 @@ sim_stop_reason(sd, reason, sigrc)
{
switch (simstat) {
- case CTRL_C:
+ case CTRL_C:
*reason = sim_stopped;
*sigrc = GDB_SIGNAL_INT;
break;
case OK:
case TIME_OUT:
+ *reason = sim_stopped;
+ *sigrc = 0;
+ break;
case BPT_HIT:
*reason = sim_stopped;
*sigrc = GDB_SIGNAL_TRAP;
@@ -428,8 +400,10 @@ sim_stop_reason(sd, reason, sigrc)
*sigrc = 0;
*reason = sim_exited;
}
- ctrl_c = 0;
- simstat = OK;
+
+ if (sis_verbose)
+ (*sim_callback->printf_filtered) (sim_callback,
+ "sim_stop_reason %x : %x\n", *reason, *sigrc);
}
/* Flush all register windows out to the stack. Starting after the invalid
@@ -490,7 +464,25 @@ flush_windows ()
void
sim_resume(SIM_DESC sd, int step, int siggnal)
{
- simstat = run_sim(&sregs, UINT64_MAX, 0);
+ if (sis_verbose)
+ (*sim_callback->printf_filtered) (sim_callback,
+ "sim_resume %x : %x : %x : %x : 0x%08x\n", step, siggnal, sregs.bphit, sregs.wphit, sregs.pc);
+ if (step) {
+ sregs.bphit = 0;
+ sregs.wphit = 1;
+ simstat = run_sim(&sregs, 1, 0);
+ sregs.bphit = 0;
+ sregs.wphit = 0;
+ } else if (sregs.bphit || sregs.wphit) {
+ sregs.bphit = 0;
+ sregs.wphit = 1;
+ simstat = run_sim(&sregs, 1, 0);
+ sregs.bphit = sregs.wphit = 0;
+ simstat = run_sim(&sregs, UINT64_MAX, 0);
+ sregs.bphit = 0;
+ }
+ else
+ simstat = run_sim(&sregs, UINT64_MAX, 0);
if (sis_gdb_break) flush_windows ();
}
@@ -525,6 +517,145 @@ sim_stop (SIM_DESC sd)
return 1;
}
+static int
+sis_insert_watchpoint_read(int addr, unsigned char mask)
+{
+ if (sregs.wprnum < WPR_MAX) {
+ sregs.wprs[sregs.wprnum] = addr;
+ sregs.wprm[sregs.wprnum] = mask;
+ sregs.wprnum++;
+ if (sis_verbose)
+ (*sim_callback->printf_filtered) (sim_callback, "inserted read watchpoint at %x\n", addr);
+ return SIM_RC_OK;
+ } else
+ return SIM_RC_FAIL;
+}
+
+static int
+sis_remove_watchpoint_read(int addr)
+{
+ int i = 0;
+
+ while ((i < sregs.wprnum) && (sregs.wprs[i] != addr))
+ i++;
+ if (addr == sregs.wprs[i]) {
+ for (; i < sregs.wprnum - 1; i++)
+ sregs.wprs[i] = sregs.wprs[i + 1];
+ sregs.wprnum -= 1;
+ if (sis_verbose)
+ (*sim_callback->printf_filtered) (sim_callback, "removed read watchpoint at %x\n", addr);
+ return 0;
+ }
+ return 1;
+}
+
+static int
+sis_insert_watchpoint_write(int32 addr, unsigned char mask)
+{
+ if (sregs.wpwnum < WPR_MAX) {
+ sregs.wpws[sregs.wpwnum] = addr;
+ sregs.wpwm[sregs.wpwnum] = mask;
+ sregs.wpwnum++;
+ if (sis_verbose)
+ (*sim_callback->printf_filtered) (sim_callback, "sim_insert_watchpoint_write: 0x%08x : %x\n", addr, mask);
+ return SIM_RC_OK;
+ } else
+ return SIM_RC_FAIL;
+}
+
+static int
+sis_remove_watchpoint_write(int addr)
+{
+ int i = 0;
+
+ while ((i < sregs.wpwnum) && (sregs.wpws[i] != addr))
+ i++;
+ if (addr == sregs.wpws[i]) {
+ for (; i < sregs.wpwnum - 1; i++)
+ sregs.wpws[i] = sregs.wpws[i + 1];
+ sregs.wpwnum -= 1;
+ if (sis_verbose)
+ (*sim_callback->printf_filtered) (sim_callback, "removed write watchpoint at %x\n", addr);
+ return SIM_RC_OK;
+ }
+ return SIM_RC_FAIL;
+}
+
+int sim_can_use_hw_breakpoint (SIM_DESC sd, int type, int cnt, int othertype)
+{
+ if (type == 2) /* bp_hardware_breakpoint not supported */
+ return 0;
+ else
+ return 1;
+}
+
+
+int sim_set_watchpoint (SIM_DESC sd, SIM_ADDR mem, int length, int type)
+{
+ int res;
+ unsigned char mask;
+
+ switch (length) {
+ case 1: mask = 0; break;
+ case 2: mask = 1; break;
+ case 4: mask = 3; break;
+ default: mask = 7; break;
+ }
+
+ switch (type) {
+ case 0:
+ res = sis_insert_watchpoint_write (mem, mask);
+ break;
+ case 1:
+ res = sis_insert_watchpoint_read (mem, mask);
+ break;
+ case 2:
+ if ((res = sis_insert_watchpoint_write (mem, mask)) == SIM_RC_OK)
+ res = sis_insert_watchpoint_read (mem, mask);
+ if (res == SIM_RC_FAIL)
+ sis_remove_watchpoint_read (mem);
+ break;
+ default:
+ res = -1;
+ }
+ return (res);
+}
+
+
+int sim_clear_watchpoint (SIM_DESC sd, SIM_ADDR mem, int length, int type)
+{
+ int res;
+ switch (type) {
+ case 0:
+ res = sis_remove_watchpoint_write (mem);
+ break;
+ case 1:
+ res = sis_remove_watchpoint_read (mem);
+ break;
+ case 2:
+ if ((res = sis_remove_watchpoint_write (mem)) == SIM_RC_OK)
+ res = sis_remove_watchpoint_read (mem);
+ else
+ sis_remove_watchpoint_read (mem);
+ break;
+ default:
+ res = -1;
+ }
+ return (res);
+}
+
+int sim_stopped_by_watchpoint (SIM_DESC sd)
+{
+ if (sis_verbose)
+ (*sim_callback->printf_filtered) (sim_callback, "sim_stopped_by_watchpoint %x\n", sregs.wphit);
+ return((sregs.wphit != 0));
+}
+
+int sim_watchpoint_address (SIM_DESC sd)
+{
+ return(sregs.wpaddress);
+}
+
#if 0 /* FIXME: These shouldn't exist. */
int
diff --git a/sim/frv/Makefile.in b/sim/frv/Makefile.in
index ea34bf2..1e1398d 100644
--- a/sim/frv/Makefile.in
+++ b/sim/frv/Makefile.in
@@ -26,6 +26,7 @@ SIM_OBJS = \
sim-hrw.o \
sim-model.o \
sim-reg.o \
+ sim-watch-remote.o \
cgen-utils.o cgen-trace.o cgen-scache.o cgen-fpu.o cgen-accfp.o \
cgen-run.o sim-reason.o sim-engine.o sim-stop.o \
sim-if.o arch.o \
diff --git a/sim/h8300/Makefile.in b/sim/h8300/Makefile.in
index 7a569bd..3337b89 100644
--- a/sim/h8300/Makefile.in
+++ b/sim/h8300/Makefile.in
@@ -25,6 +25,7 @@ SIM_OBJS = compile.o \
sim-cpu.o \
sim-engine.o \
sim-load.o \
+ sim-watch-remote.o \
$(SIM_EXTRA_OBJS)
## COMMON_POST_CONFIG_FRAG
diff --git a/sim/iq2000/Makefile.in b/sim/iq2000/Makefile.in
index 7606b26..c079248 100644
--- a/sim/iq2000/Makefile.in
+++ b/sim/iq2000/Makefile.in
@@ -32,6 +32,7 @@ SIM_OBJS = \
cgen-utils.o cgen-trace.o cgen-scache.o \
cgen-run.o sim-reason.o sim-engine.o sim-stop.o \
sim-if.o arch.o \
+ sim-watch-remote.o \
$(IQ2000_OBJS) \
$(CONFIG_DEVICES)
diff --git a/sim/lm32/Makefile.in b/sim/lm32/Makefile.in
index 05cf53b..d8d5a2a 100644
--- a/sim/lm32/Makefile.in
+++ b/sim/lm32/Makefile.in
@@ -15,6 +15,7 @@ SIM_OBJS = \
cgen-utils.o cgen-trace.o cgen-scache.o \
cgen-run.o sim-reason.o sim-engine.o sim-stop.o \
sim-if.o arch.o \
+ sim-watch-remote.o \
cpu.o decode.o sem.o model.o mloop.o \
lm32.o traps.o user.o
diff --git a/sim/m32c/gdb-if.c b/sim/m32c/gdb-if.c
index 62ec28c..525c934 100644
--- a/sim/m32c/gdb-if.c
+++ b/sim/m32c/gdb-if.c
@@ -710,3 +710,29 @@ sim_complete_command (SIM_DESC sd, const char *text, const char *word)
{
return NULL;
}
+
+int sim_set_watchpoint (SIM_DESC sd, SIM_ADDR mem, int length, int type)
+{
+ return -1;
+}
+
+int sim_clear_watchpoint (SIM_DESC sd, SIM_ADDR mem, int length, int type)
+{
+ return -1;
+}
+
+int sim_stopped_by_watchpoint (SIM_DESC sd)
+{
+ return 0;
+}
+
+int sim_watchpoint_address (SIM_DESC sd)
+{
+ return 0;
+}
+
+int sim_can_use_hw_breakpoint (SIM_DESC sd, int type, int cnt, int othertype)
+{
+ return 0;
+}
+
diff --git a/sim/m32r/Makefile.in b/sim/m32r/Makefile.in
index 12a6a8d..dfa7bd0 100644
--- a/sim/m32r/Makefile.in
+++ b/sim/m32r/Makefile.in
@@ -34,6 +34,7 @@ SIM_OBJS = \
cgen-utils.o cgen-trace.o cgen-scache.o \
cgen-run.o sim-reason.o sim-engine.o sim-stop.o \
sim-if.o arch.o \
+ sim-watch-remote.o \
$(M32R_OBJS) \
$(M32RX_OBJS) \
$(M32R2_OBJS) \
diff --git a/sim/m68hc11/Makefile.in b/sim/m68hc11/Makefile.in
index fac0b24..62915d1 100644
--- a/sim/m68hc11/Makefile.in
+++ b/sim/m68hc11/Makefile.in
@@ -31,6 +31,7 @@ SIM_OBJS = $(M68HC11_OBJS) \
sim-stop.o \
sim-hrw.o \
sim-reason.o \
+ sim-watch-remote.o \
$(SIM_EXTRA_OBJS)
SIM_PROFILE= -DPROFILE=1 -DWITH_PROFILE=-1
diff --git a/sim/mcore/interp.c b/sim/mcore/interp.c
index 1b8d2a3..7ad7508 100644
--- a/sim/mcore/interp.c
+++ b/sim/mcore/interp.c
@@ -2201,3 +2201,29 @@ sim_set_callbacks (ptr)
{
callback = ptr;
}
+
+int sim_set_watchpoint (SIM_DESC sd, SIM_ADDR mem, int length, int type)
+{
+ return -1;
+}
+
+int sim_clear_watchpoint (SIM_DESC sd, SIM_ADDR mem, int length, int type)
+{
+ return -1;
+}
+
+int sim_stopped_by_watchpoint (SIM_DESC sd)
+{
+ return 0;
+}
+
+int sim_watchpoint_address (SIM_DESC sd)
+{
+ return 0;
+}
+
+int sim_can_use_hw_breakpoint (SIM_DESC sd, int type, int cnt, int othertype)
+{
+ return 0;
+}
+
diff --git a/sim/microblaze/Makefile.in b/sim/microblaze/Makefile.in
index dda4650..49be635 100644
--- a/sim/microblaze/Makefile.in
+++ b/sim/microblaze/Makefile.in
@@ -17,7 +17,7 @@
## COMMON_PRE_CONFIG_FRAG
-SIM_OBJS = interp.o sim-load.o
+SIM_OBJS = interp.o sim-load.o sim-watch-remote.o
SIM_EXTRA_LIBS = -lm
SIM_EXTRA_CLEAN = microblaze-clean
diff --git a/sim/mips/Makefile.in b/sim/mips/Makefile.in
index 985f4e5..22b4714 100644
--- a/sim/mips/Makefile.in
+++ b/sim/mips/Makefile.in
@@ -54,6 +54,7 @@ SIM_OBJS = \
sim-stop.o \
sim-resume.o \
sim-reason.o \
+ sim-watch-remote.o
# List of flags to always pass to $(CC).
diff --git a/sim/mn10300/Makefile.in b/sim/mn10300/Makefile.in
index c94e531..0a8cd86 100644
--- a/sim/mn10300/Makefile.in
+++ b/sim/mn10300/Makefile.in
@@ -27,6 +27,7 @@ MN10300_OBJS = \
sim-resume.o \
sim-reason.o \
sim-stop.o \
+ sim-watch-remote.o \
dv-sockser.o
SIM_OBJS = $(MN10300_OBJS) interp.o
diff --git a/sim/moxie/interp.c b/sim/moxie/interp.c
index 1126552..32f2ae4 100644
--- a/sim/moxie/interp.c
+++ b/sim/moxie/interp.c
@@ -1467,3 +1467,29 @@ sim_set_callbacks (ptr)
{
callback = ptr;
}
+
+int sim_set_watchpoint (SIM_DESC sd, SIM_ADDR mem, int length, int type)
+{
+ return -1;
+}
+
+int sim_clear_watchpoint (SIM_DESC sd, SIM_ADDR mem, int length, int type)
+{
+ return -1;
+}
+
+int sim_stopped_by_watchpoint (SIM_DESC sd)
+{
+ return 0;
+}
+
+int sim_watchpoint_address (SIM_DESC sd)
+{
+ return 0;
+}
+
+int sim_can_use_hw_breakpoint (SIM_DESC sd, int type, int cnt, int othertype)
+{
+ return 0;
+}
+
diff --git a/sim/msp430/Makefile.in b/sim/msp430/Makefile.in
index e398d0d..5982f4b 100644
--- a/sim/msp430/Makefile.in
+++ b/sim/msp430/Makefile.in
@@ -36,6 +36,7 @@ SIM_OBJS = \
sim-reg.o \
sim-resume.o \
sim-stop.o \
+ sim-watch-remote.o \
$(SIM_EXTRA_OBJS)
# List of extra dependencies.
diff --git a/sim/ppc/gdb-sim.c b/sim/ppc/gdb-sim.c
index 0269458..b591e9e 100644
--- a/sim/ppc/gdb-sim.c
+++ b/sim/ppc/gdb-sim.c
@@ -1296,3 +1296,29 @@ sim_store_register (SIM_DESC sd, int regno, unsigned char *buf, int length)
return psim_write_register(simulator, MAX_NR_PROCESSORS,
buf, regname, raw_transfer);
}
+
+int sim_set_watchpoint (SIM_DESC sd, SIM_ADDR mem, int length, int type)
+{
+ return -1;
+}
+
+int sim_clear_watchpoint (SIM_DESC sd, SIM_ADDR mem, int length, int type)
+{
+ return -1;
+}
+
+int sim_stopped_by_watchpoint (SIM_DESC sd)
+{
+ return 0;
+}
+
+int sim_watchpoint_address (SIM_DESC sd)
+{
+ return 0;
+}
+
+int sim_can_use_hw_breakpoint (SIM_DESC sd, int type, int cnt, int othertype)
+{
+ return 0;
+}
+
diff --git a/sim/rl78/gdb-if.c b/sim/rl78/gdb-if.c
index 6317a73..26a425b 100644
--- a/sim/rl78/gdb-if.c
+++ b/sim/rl78/gdb-if.c
@@ -571,3 +571,29 @@ sim_complete_command (SIM_DESC sd, const char *text, const char *word)
{
return NULL;
}
+
+int sim_set_watchpoint (SIM_DESC sd, SIM_ADDR mem, int length, int type)
+{
+ return -1;
+}
+
+int sim_clear_watchpoint (SIM_DESC sd, SIM_ADDR mem, int length, int type)
+{
+ return -1;
+}
+
+int sim_stopped_by_watchpoint (SIM_DESC sd)
+{
+ return 0;
+}
+
+int sim_watchpoint_address (SIM_DESC sd)
+{
+ return 0;
+}
+
+int sim_can_use_hw_breakpoint (SIM_DESC sd, int type, int cnt, int othertype)
+{
+ return 0;
+}
+
diff --git a/sim/rx/gdb-if.c b/sim/rx/gdb-if.c
index 762c3d2..56eb8e6 100644
--- a/sim/rx/gdb-if.c
+++ b/sim/rx/gdb-if.c
@@ -853,3 +853,29 @@ sim_complete_command (SIM_DESC sd, const char *text, const char *word)
{
return NULL;
}
+
+int sim_set_watchpoint (SIM_DESC sd, SIM_ADDR mem, int length, int type)
+{
+ return -1;
+}
+
+int sim_clear_watchpoint (SIM_DESC sd, SIM_ADDR mem, int length, int type)
+{
+ return -1;
+}
+
+int sim_stopped_by_watchpoint (SIM_DESC sd)
+{
+ return 0;
+}
+
+int sim_watchpoint_address (SIM_DESC sd)
+{
+ return 0;
+}
+
+int sim_can_use_hw_breakpoint (SIM_DESC sd, int type, int cnt, int othertype)
+{
+ return 0;
+}
+
diff --git a/sim/sh/interp.c b/sim/sh/interp.c
index c854174..f1bcd06 100644
--- a/sim/sh/interp.c
+++ b/sim/sh/interp.c
@@ -2780,3 +2780,29 @@ sim_complete_command (SIM_DESC sd, const char *text, const char *word)
{
return NULL;
}
+
+int sim_set_watchpoint (SIM_DESC sd, SIM_ADDR mem, int length, int type)
+{
+ return -1;
+}
+
+int sim_clear_watchpoint (SIM_DESC sd, SIM_ADDR mem, int length, int type)
+{
+ return -1;
+}
+
+int sim_stopped_by_watchpoint (SIM_DESC sd)
+{
+ return 0;
+}
+
+int sim_watchpoint_address (SIM_DESC sd)
+{
+ return 0;
+}
+
+int sim_can_use_hw_breakpoint (SIM_DESC sd, int type, int cnt, int othertype)
+{
+ return 0;
+}
+
diff --git a/sim/sh64/Makefile.in b/sim/sh64/Makefile.in
index 0022d8e..a9cf62a 100644
--- a/sim/sh64/Makefile.in
+++ b/sim/sh64/Makefile.in
@@ -34,6 +34,7 @@ SIM_OBJS = \
cgen-utils.o cgen-trace.o cgen-scache.o \
cgen-run.o sim-reason.o sim-engine.o sim-stop.o \
sim-if.o arch.o \
+ sim-watch-remote.o \
$(SH64_OBJS) \
$(CONFIG_DEVICES)
diff --git a/sim/v850/Makefile.in b/sim/v850/Makefile.in
index 067158f..ad24cd8 100644
--- a/sim/v850/Makefile.in
+++ b/sim/v850/Makefile.in
@@ -28,7 +28,8 @@ SIM_OBJS = \
sim-hrw.o \
sim-resume.o \
sim-reason.o \
- sim-stop.o
+ sim-stop.o \
+ sim-watch-remote.o
SIM_RUN_OBJS = nrun.o
--
1.9.1
^ permalink raw reply [flat|nested] 34+ messages in thread
* [PATCH v3 04/14] sim/erc32: use SIM_AC_OPTION_HOSTENDIAN to probe for host endianess
2015-03-01 21:10 [PATCH v3 00/14] Update of the SPARC SIS simulator Jiri Gaisler
` (11 preceding siblings ...)
2015-03-01 21:11 ` [PATCH v3 10/14] sim/erc32: Add support for LEON3 processor emulation Jiri Gaisler
@ 2015-03-01 21:11 ` Jiri Gaisler
2015-03-16 5:19 ` Mike Frysinger
2015-03-01 21:11 ` [PATCH v3 14/14] Add watchpoint support to gdb simulator interface Jiri Gaisler
13 siblings, 1 reply; 34+ messages in thread
From: Jiri Gaisler @ 2015-03-01 21:11 UTC (permalink / raw)
To: gdb-patches; +Cc: Jiri Gaisler
* Makefile.in (end, end.h) Remove target rules.
* end.c Remove unnecessary local checks (end.c)
* configure, config.in : Regenerate.
* configure.ac : Use SIM_AC_OPTION_HOSTENDIAN
* erc32.c : Remove dependecy on end.h
* exec.c : Remove dependecy on end.h. Use HOST_LITTLE_ENDIAN.
* func.c : As above.
* sis.c : As above.
---
sim/erc32/Makefile.in | 18 +---
sim/erc32/config.in | 15 +++
sim/erc32/configure | 260 ++++++++++++++++++++++++++++++++++++++++++++++++-
sim/erc32/configure.ac | 1 +
sim/erc32/end.c | 27 -----
sim/erc32/erc32.c | 1 -
sim/erc32/exec.c | 7 +-
sim/erc32/func.c | 3 +-
sim/erc32/sis.h | 11 ++-
9 files changed, 285 insertions(+), 58 deletions(-)
delete mode 100644 sim/erc32/end.c
diff --git a/sim/erc32/Makefile.in b/sim/erc32/Makefile.in
index a60cd8a..4f86017 100644
--- a/sim/erc32/Makefile.in
+++ b/sim/erc32/Makefile.in
@@ -41,21 +41,13 @@ sis: sis.o $(SIS_OFILES) $(COMMON_OBJS) $(LIBDEPS)
$(CC) $(ALL_CFLAGS) -o sis \
sis.o $(SIS_OFILES) $(COMMON_OBJS) $(EXTRA_LIBS)
-# FIXME: This computes the build host's endianness, doesn't it?
-# There is AC_C_BIGENDIAN but it doesn't handle float endianness.
-# [Are int/float endians every different on a sparc?]
-end: $(srcdir)/end.c
- $(CC_FOR_BUILD) -I. $(srcdir)/end.c -o end
-end.h: end
- ./end > end.h
-
# Copy the files into directories where they will be run.
install-sis: installdirs
n=`echo sis | sed '$(program_transform_name)'`; \
$(INSTALL_PROGRAM) sis$(EXEEXT) $(DESTDIR)$(bindir)/$$n$(EXEEXT)
clean-sis:
- rm -f sis end end.h
+ rm -f sis
configure:
@echo "Rebuilding configure..."
@@ -64,11 +56,3 @@ configure:
else true ; fi ; \
(cd $${srcdir}; autoconf --localdir=../common)
-# Circumvent Sun Make bug with VPATH.
-erc32.o: erc32.c sis.h end.h
-exec.o: exec.c sis.h end.h
-float.o: float.c sis.h end.h
-func.o: func.c sis.h end.h
-help.o: help.c sis.h end.h
-interf.o: interf.c sis.h end.h
-sis.o: sis.c sis.h end.h
diff --git a/sim/erc32/config.in b/sim/erc32/config.in
index 5fed8c1..b367e14 100644
--- a/sim/erc32/config.in
+++ b/sim/erc32/config.in
@@ -1,5 +1,8 @@
/* config.in. Generated from configure.ac by autoheader. */
+/* Define if building universal (internal helper macro) */
+#undef AC_APPLE_UNIVERSAL_BUILD
+
/* Define to 1 if translation of program messages to the user's native
language is requested. */
#undef ENABLE_NLS
@@ -135,6 +138,18 @@
#endif
+/* Define WORDS_BIGENDIAN to 1 if your processor stores words with the most
+ significant byte first (like Motorola and SPARC, unlike Intel). */
+#if defined AC_APPLE_UNIVERSAL_BUILD
+# if defined __BIG_ENDIAN__
+# define WORDS_BIGENDIAN 1
+# endif
+#else
+# ifndef WORDS_BIGENDIAN
+# undef WORDS_BIGENDIAN
+# endif
+#endif
+
/* Define to 1 if on MINIX. */
#undef _MINIX
diff --git a/sim/erc32/configure b/sim/erc32/configure
index ba43717..cbdcea5 100755
--- a/sim/erc32/configure
+++ b/sim/erc32/configure
@@ -761,6 +761,7 @@ enable_sim_trace
enable_sim_profile
with_pkgversion
with_bugurl
+enable_sim_hostendian
'
ac_precious_vars='build_alias
host_alias
@@ -1403,6 +1404,7 @@ Optional Features:
--enable-sim-stdio Specify whether to use stdio for console input/output.
--enable-sim-trace=opts Enable tracing flags
--enable-sim-profile=opts Enable profiling flags
+ --enable-sim-hostendian=end Specify host byte endian orientation.
Optional Packages:
--with-PACKAGE[=ARG] use PACKAGE [ARG=yes]
@@ -8121,7 +8123,7 @@ $as_echo "$lt_cv_ld_force_load" >&6; }
case ${MACOSX_DEPLOYMENT_TARGET-10.0},$host in
10.0,*86*-darwin8*|10.0,*-darwin[91]*)
_lt_dar_allow_undefined='${wl}-undefined ${wl}dynamic_lookup' ;;
- 10.[012]*)
+ 10.[012][,.]*)
_lt_dar_allow_undefined='${wl}-flat_namespace ${wl}-undefined ${wl}suppress' ;;
10.*)
_lt_dar_allow_undefined='${wl}-undefined ${wl}dynamic_lookup' ;;
@@ -10144,7 +10146,7 @@ _LT_EOF
if $LD --help 2>&1 | $EGREP ': supported targets:.* elf' > /dev/null \
&& test "$tmp_diet" = no
then
- tmp_addflag=
+ tmp_addflag=' $pic_flag'
tmp_sharedflag='-shared'
case $cc_basename,$host_cpu in
pgcc*) # Portland Group C compiler
@@ -12354,7 +12356,7 @@ else
lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2
lt_status=$lt_dlunknown
cat > conftest.$ac_ext <<_LT_EOF
-#line 12357 "configure"
+#line 12359 "configure"
#include "confdefs.h"
#if HAVE_DLFCN_H
@@ -12460,7 +12462,7 @@ else
lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2
lt_status=$lt_dlunknown
cat > conftest.$ac_ext <<_LT_EOF
-#line 12463 "configure"
+#line 12465 "configure"
#include "confdefs.h"
#if HAVE_DLFCN_H
@@ -13111,6 +13113,255 @@ fi
fi
+# Check whether --enable-sim-hostendian was given.
+if test "${enable_sim_hostendian+set}" = set; then :
+ enableval=$enable_sim_hostendian; case "${enableval}" in
+ no) sim_hostendian="-DWITH_HOST_BYTE_ORDER=0";;
+ b*|B*) sim_hostendian="-DWITH_HOST_BYTE_ORDER=BIG_ENDIAN";;
+ l*|L*) sim_hostendian="-DWITH_HOST_BYTE_ORDER=LITTLE_ENDIAN";;
+ *) as_fn_error "\"Unknown value $enableval for --enable-sim-hostendian\"" "$LINENO" 5; sim_hostendian="";;
+esac
+if test x"$silent" != x"yes" && test x"$sim_hostendian" != x""; then
+ echo "Setting hostendian flags = $sim_hostendian" 6>&1
+fi
+else
+
+if test "x$cross_compiling" = "xno"; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether byte ordering is bigendian" >&5
+$as_echo_n "checking whether byte ordering is bigendian... " >&6; }
+if test "${ac_cv_c_bigendian+set}" = set; then :
+ $as_echo_n "(cached) " >&6
+else
+ ac_cv_c_bigendian=unknown
+ # See if we're dealing with a universal compiler.
+ cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h. */
+#ifndef __APPLE_CC__
+ not a universal capable compiler
+ #endif
+ typedef int dummy;
+
+_ACEOF
+if ac_fn_c_try_compile "$LINENO"; then :
+
+ # Check for potential -arch flags. It is not universal unless
+ # there are at least two -arch flags with different values.
+ ac_arch=
+ ac_prev=
+ for ac_word in $CC $CFLAGS $CPPFLAGS $LDFLAGS; do
+ if test -n "$ac_prev"; then
+ case $ac_word in
+ i?86 | x86_64 | ppc | ppc64)
+ if test -z "$ac_arch" || test "$ac_arch" = "$ac_word"; then
+ ac_arch=$ac_word
+ else
+ ac_cv_c_bigendian=universal
+ break
+ fi
+ ;;
+ esac
+ ac_prev=
+ elif test "x$ac_word" = "x-arch"; then
+ ac_prev=arch
+ fi
+ done
+fi
+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
+ if test $ac_cv_c_bigendian = unknown; then
+ # See if sys/param.h defines the BYTE_ORDER macro.
+ cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h. */
+#include <sys/types.h>
+ #include <sys/param.h>
+
+int
+main ()
+{
+#if ! (defined BYTE_ORDER && defined BIG_ENDIAN \
+ && defined LITTLE_ENDIAN && BYTE_ORDER && BIG_ENDIAN \
+ && LITTLE_ENDIAN)
+ bogus endian macros
+ #endif
+
+ ;
+ return 0;
+}
+_ACEOF
+if ac_fn_c_try_compile "$LINENO"; then :
+ # It does; now see whether it defined to BIG_ENDIAN or not.
+ cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h. */
+#include <sys/types.h>
+ #include <sys/param.h>
+
+int
+main ()
+{
+#if BYTE_ORDER != BIG_ENDIAN
+ not big endian
+ #endif
+
+ ;
+ return 0;
+}
+_ACEOF
+if ac_fn_c_try_compile "$LINENO"; then :
+ ac_cv_c_bigendian=yes
+else
+ ac_cv_c_bigendian=no
+fi
+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
+fi
+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
+ fi
+ if test $ac_cv_c_bigendian = unknown; then
+ # See if <limits.h> defines _LITTLE_ENDIAN or _BIG_ENDIAN (e.g., Solaris).
+ cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h. */
+#include <limits.h>
+
+int
+main ()
+{
+#if ! (defined _LITTLE_ENDIAN || defined _BIG_ENDIAN)
+ bogus endian macros
+ #endif
+
+ ;
+ return 0;
+}
+_ACEOF
+if ac_fn_c_try_compile "$LINENO"; then :
+ # It does; now see whether it defined to _BIG_ENDIAN or not.
+ cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h. */
+#include <limits.h>
+
+int
+main ()
+{
+#ifndef _BIG_ENDIAN
+ not big endian
+ #endif
+
+ ;
+ return 0;
+}
+_ACEOF
+if ac_fn_c_try_compile "$LINENO"; then :
+ ac_cv_c_bigendian=yes
+else
+ ac_cv_c_bigendian=no
+fi
+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
+fi
+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
+ fi
+ if test $ac_cv_c_bigendian = unknown; then
+ # Compile a test program.
+ if test "$cross_compiling" = yes; then :
+ # Try to guess by grepping values from an object file.
+ cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h. */
+short int ascii_mm[] =
+ { 0x4249, 0x4765, 0x6E44, 0x6961, 0x6E53, 0x7953, 0 };
+ short int ascii_ii[] =
+ { 0x694C, 0x5454, 0x656C, 0x6E45, 0x6944, 0x6E61, 0 };
+ int use_ascii (int i) {
+ return ascii_mm[i] + ascii_ii[i];
+ }
+ short int ebcdic_ii[] =
+ { 0x89D3, 0xE3E3, 0x8593, 0x95C5, 0x89C4, 0x9581, 0 };
+ short int ebcdic_mm[] =
+ { 0xC2C9, 0xC785, 0x95C4, 0x8981, 0x95E2, 0xA8E2, 0 };
+ int use_ebcdic (int i) {
+ return ebcdic_mm[i] + ebcdic_ii[i];
+ }
+ extern int foo;
+
+int
+main ()
+{
+return use_ascii (foo) == use_ebcdic (foo);
+ ;
+ return 0;
+}
+_ACEOF
+if ac_fn_c_try_compile "$LINENO"; then :
+ if grep BIGenDianSyS conftest.$ac_objext >/dev/null; then
+ ac_cv_c_bigendian=yes
+ fi
+ if grep LiTTleEnDian conftest.$ac_objext >/dev/null ; then
+ if test "$ac_cv_c_bigendian" = unknown; then
+ ac_cv_c_bigendian=no
+ else
+ # finding both strings is unlikely to happen, but who knows?
+ ac_cv_c_bigendian=unknown
+ fi
+ fi
+fi
+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
+else
+ cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h. */
+$ac_includes_default
+int
+main ()
+{
+
+ /* Are we little or big endian? From Harbison&Steele. */
+ union
+ {
+ long int l;
+ char c[sizeof (long int)];
+ } u;
+ u.l = 1;
+ return u.c[sizeof (long int) - 1] == 1;
+
+ ;
+ return 0;
+}
+_ACEOF
+if ac_fn_c_try_run "$LINENO"; then :
+ ac_cv_c_bigendian=no
+else
+ ac_cv_c_bigendian=yes
+fi
+rm -f core *.core core.conftest.* gmon.out bb.out conftest$ac_exeext \
+ conftest.$ac_objext conftest.beam conftest.$ac_ext
+fi
+
+ fi
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_c_bigendian" >&5
+$as_echo "$ac_cv_c_bigendian" >&6; }
+ case $ac_cv_c_bigendian in #(
+ yes)
+ $as_echo "#define WORDS_BIGENDIAN 1" >>confdefs.h
+;; #(
+ no)
+ ;; #(
+ universal)
+
+$as_echo "#define AC_APPLE_UNIVERSAL_BUILD 1" >>confdefs.h
+
+ ;; #(
+ *)
+ as_fn_error "unknown endianness
+ presetting ac_cv_c_bigendian=no (or yes) will help" "$LINENO" 5 ;;
+ esac
+
+ if test $ac_cv_c_bigendian = yes; then
+ sim_hostendian="-DWITH_HOST_BYTE_ORDER=BIG_ENDIAN"
+ else
+ sim_hostendian="-DWITH_HOST_BYTE_ORDER=LITTLE_ENDIAN"
+ fi
+else
+ sim_hostendian="-DWITH_HOST_BYTE_ORDER=0"
+fi
+fi
+
+
ac_sources="$sim_link_files"
ac_dests="$sim_link_links"
while test -n "$ac_sources"; do
@@ -13245,6 +13496,7 @@ if test -z "${MAINTAINER_MODE_TRUE}" && test -z "${MAINTAINER_MODE_FALSE}"; then
Usually this means the macro was only invoked conditionally." "$LINENO" 5
fi
+
: ${CONFIG_STATUS=./config.status}
ac_write_fail=0
ac_clean_files_save=$ac_clean_files
diff --git a/sim/erc32/configure.ac b/sim/erc32/configure.ac
index bc46091..854845c 100644
--- a/sim/erc32/configure.ac
+++ b/sim/erc32/configure.ac
@@ -32,4 +32,5 @@ else
AC_ERROR([the required "readline" library is missing]), $TERMCAP)
fi
AC_SUBST(READLINE)
+SIM_AC_OPTION_HOSTENDIAN
SIM_AC_OUTPUT
diff --git a/sim/erc32/end.c b/sim/erc32/end.c
deleted file mode 100644
index 9337198..0000000
--- a/sim/erc32/end.c
+++ /dev/null
@@ -1,27 +0,0 @@
-#include "config.h"
-#include <stdio.h>
-
-int
-main()
-{
-
- unsigned int u1;
- char *c;
- double d1;
- float *f1;
-
- c = (char *) &u1;
- u1 = 0x0F;
- if (c[0] == 0x0F)
- puts("#define HOST_LITTLE_ENDIAN\n");
- else
- puts("#define HOST_BIG_ENDIAN\n");
-
- d1 = 1.0;
- f1 = (float *) &d1;
- if (*((int *) f1) != 0x3ff00000)
- puts("#define HOST_LITTLE_ENDIAN_FLOAT\n");
- else
- puts("#define HOST_BIG_ENDIAN_FLOAT\n");
- return 0;
-}
diff --git a/sim/erc32/erc32.c b/sim/erc32/erc32.c
index 18913dd..f33585c 100644
--- a/sim/erc32/erc32.c
+++ b/sim/erc32/erc32.c
@@ -30,7 +30,6 @@
#include <sys/file.h>
#include <unistd.h>
#include "sis.h"
-#include "end.h"
#include "sim-config.h"
extern int ctrl_c;
diff --git a/sim/erc32/exec.c b/sim/erc32/exec.c
index 68c77c6..e2935ed 100644
--- a/sim/erc32/exec.c
+++ b/sim/erc32/exec.c
@@ -21,7 +21,6 @@
#include "config.h"
#include "sis.h"
-#include "end.h"
#include <math.h>
#include <stdio.h>
@@ -1736,7 +1735,7 @@ fpexec(op3, rd, rs1, rs2, sregs)
but what about machines where float values are different endianness
from integer values? */
-#ifdef HOST_LITTLE_ENDIAN_FLOAT
+#ifdef HOST_LITTLE_ENDIAN
rs1 &= 0x1f;
switch (opf) {
case FADDd:
@@ -1914,7 +1913,7 @@ fpexec(op3, rd, rs1, rs2, sregs)
accex = get_accex();
-#ifdef HOST_LITTLE_ENDIAN_FLOAT
+#ifdef HOST_LITTLE_ENDIAN
switch (opf) {
case FADDd:
case FDIVd:
@@ -2061,7 +2060,7 @@ init_regs(sregs)
sregs->err_mode = 0;
ext_irl = 0;
sregs->g[0] = 0;
-#ifdef HOST_LITTLE_ENDIAN_FLOAT
+#ifdef HOST_LITTLE_ENDIAN
sregs->fdp = (float32 *) sregs->fd;
sregs->fsi = (int32 *) sregs->fs;
#else
diff --git a/sim/erc32/func.c b/sim/erc32/func.c
index 9a41e0b..69d11fe 100644
--- a/sim/erc32/func.c
+++ b/sim/erc32/func.c
@@ -26,7 +26,6 @@
#include <stdlib.h>
#include <ctype.h>
#include "sis.h"
-#include "end.h"
#include <dis-asm.h>
#include "sim-config.h"
#include <inttypes.h>
@@ -737,7 +736,7 @@ disp_fpu(sregs)
printf("\n fsr: %08X\n\n", sregs->fsr);
-#ifdef HOST_LITTLE_ENDIAN_FLOAT
+#ifdef HOST_LITTLE_ENDIAN
for (i = 0; i < 32; i++)
sregs->fdp[i ^ 1] = sregs->fs[i];
#endif
diff --git a/sim/erc32/sis.h b/sim/erc32/sis.h
index c4d50da..573e026 100644
--- a/sim/erc32/sis.h
+++ b/sim/erc32/sis.h
@@ -24,8 +24,13 @@
#include "gdb/callback.h"
#include "gdb/remote-sim.h"
#include <stdint.h>
-
-#include "end.h"
+#include <sim-config.h>
+
+#if WITH_HOST_BYTE_ORDER == BIG_ENDIAN
+#define HOST_BIG_ENDIAN
+#else
+#define HOST_LITTLE_ENDIAN
+#endif
#define I_ACC_EXC 1
@@ -58,7 +63,7 @@ typedef int64_t int64; /* 64-bit signed int */
struct pstate {
float64 fd[16]; /* FPU registers */
-#ifdef HOST_LITTLE_ENDIAN_FLOAT
+#ifdef HOST_LITTLE_ENDIAN
float32 fs[32];
float32 *fdp;
#else
--
1.9.1
^ permalink raw reply [flat|nested] 34+ messages in thread
* [PATCH v3 10/14] sim/erc32: Add support for LEON3 processor emulation.
2015-03-01 21:10 [PATCH v3 00/14] Update of the SPARC SIS simulator Jiri Gaisler
` (10 preceding siblings ...)
2015-03-01 21:11 ` [PATCH v3 07/14] sim/erc32: Use gdb callback for UART I/O when linked with gdb Jiri Gaisler
@ 2015-03-01 21:11 ` Jiri Gaisler
2015-03-05 17:35 ` Mike Frysinger
2015-03-01 21:11 ` [PATCH v3 04/14] sim/erc32: use SIM_AC_OPTION_HOSTENDIAN to probe for host endianess Jiri Gaisler
2015-03-01 21:11 ` [PATCH v3 14/14] Add watchpoint support to gdb simulator interface Jiri Gaisler
13 siblings, 1 reply; 34+ messages in thread
From: Jiri Gaisler @ 2015-03-01 21:11 UTC (permalink / raw)
To: gdb-patches; +Cc: Jiri Gaisler
Added memory and I/O sub-system to emulate a LEON3 processor.
The cache and MMU are not emulated but enough functionallity
is provided to run any RTEMS and BCC compiled application.
The code is based on erc32.c and modified to emulate the
LEON3 address space and peripheral operations.
---
sim/erc32/Makefile.in | 4 +-
sim/erc32/README.leon3 | 53 +++
sim/erc32/README.sis | 81 ++--
sim/erc32/erc32.c | 48 ++-
sim/erc32/exec.c | 228 +++++++++--
sim/erc32/func.c | 57 +--
sim/erc32/grlib.c | 98 +++++
sim/erc32/grlib.h | 57 +++
sim/erc32/interf.c | 26 +-
sim/erc32/leon3.c | 1017 ++++++++++++++++++++++++++++++++++++++++++++++++
sim/erc32/sis.c | 22 +-
sim/erc32/sis.h | 48 ++-
12 files changed, 1610 insertions(+), 129 deletions(-)
create mode 100644 sim/erc32/README.leon3
create mode 100644 sim/erc32/grlib.c
create mode 100644 sim/erc32/grlib.h
create mode 100644 sim/erc32/leon3.c
diff --git a/sim/erc32/Makefile.in b/sim/erc32/Makefile.in
index 4f86017..e40eb79 100644
--- a/sim/erc32/Makefile.in
+++ b/sim/erc32/Makefile.in
@@ -21,7 +21,7 @@
TERMCAP_LIB = @TERMCAP@
READLINE_LIB = @READLINE@
-SIM_OBJS = exec.o erc32.o func.o help.o float.o interf.o
+SIM_OBJS = exec.o erc32.o func.o help.o float.o interf.o leon3.o grlib.o
SIM_EXTRA_LIBS = $(READLINE_LIB) $(TERMCAP_LIB) -lm
SIM_EXTRA_ALL = sis
SIM_EXTRA_INSTALL = install-sis
@@ -35,7 +35,7 @@ SIM_EXTRA_CFLAGS = -DFAST_UART -I$(srcroot)
## COMMON_POST_CONFIG_FRAG
# `sis' doesn't need interf.o.
-SIS_OFILES = exec.o erc32.o func.o help.o float.o
+SIS_OFILES = exec.o erc32.o func.o help.o float.o grlib.o leon3.o
sis: sis.o $(SIS_OFILES) $(COMMON_OBJS) $(LIBDEPS)
$(CC) $(ALL_CFLAGS) -o sis \
diff --git a/sim/erc32/README.leon3 b/sim/erc32/README.leon3
new file mode 100644
index 0000000..00ab14a
--- /dev/null
+++ b/sim/erc32/README.leon3
@@ -0,0 +1,53 @@
+
+1. LEON3 emulation
+
+The file 'leon3.c' contains a model of simple LEON3 sub-system. It
+contains 16 Mbyte ROM and 16 Mbyte RAM. Standard peripherals
+such as interrupt controller, UART and timer are provided.
+The model can execute leon3 binaries that do not require an
+MMU.
+
+To start sis in Leon3 mode, add the -leon3 switch. In gdb,
+use 'target sim -leon3' .
+
+1.1 UART
+
+The UART emulates an APBUART and is located at address 0x80000100.
+The following registers are implemeted:
+
+- UART RX and TX register (0x80000100)
+- UART status register (0x80000104)
+
+The UART generates interrupt 3.
+
+1.2 Timer unit (GPTIMER)
+
+The GPTIMER programmable counter is emulated and located at
+address 0x80000300. It is configured with two timers and separate
+interrupts (8 and 9).
+
+1.3 Interrupt controller
+
+The IRQMP interrupt controller is implemented as described in the
+GRLIB IP manual, with the exception of the interrupt level register.
+Extended interrupts are not supported. The registers are located
+at address 0x80000200.
+
+1.5 Memory interface
+
+The following memory areas are valid for the Leon3 simulator:
+
+0x00000000 - 0x01000000 ROM (16 Mbyte, loaded at start-up)
+0x40000000 - 0x41000000 RAM (16 Mbyte, loaded at start-up)
+0x80000000 - 0x81000000 APB bus, including plug&play
+0xFFFFF000 - 0xFFFFFFFF AHB plug&play area
+
+Access to non-existing memory will result in a memory exception trap.
+
+1.8 Power-down mode
+
+The Leon3 power-down feature (%asr19) is supported. When power-down is
+entered, time is skipped forward until the next event in the event queue.
+However, if the simulator event queue is empty, power-down mode is not
+entered since no interrupt would be generated to exit from the mode. A
+Ctrl-C in the simulator window will exit the power-down mode.
diff --git a/sim/erc32/README.sis b/sim/erc32/README.sis
index b119f03..aadba3c 100644
--- a/sim/erc32/README.sis
+++ b/sim/erc32/README.sis
@@ -1,10 +1,10 @@
-SIS - Sparc Instruction Simulator README file (v2.0, 05-02-1996)
+SIS - Sparc Instruction Simulator README file (v2.8, 10-11-2014)
-------------------------------------------------------------------
1. Introduction
-The SIS is a SPARC V7 architecture simulator. It consist of two parts,
+The SIS is a SPARC V7/V8 architecture simulator. It consist of two parts,
the simulator core and a user defined memory module. The simulator
core executes the instructions while the memory module emulates memory
and peripherals.
@@ -13,28 +13,28 @@ and peripherals.
The simulator is started as follows:
-sis [-uart1 uart_device1] [-uart2 uart_device2]
+sis [-leon3] [-uart1 uart_device1] [-uart2 uart_device2]
[-nfp] [-freq frequency] [-c batch_file] [files]
-The default uart devices for SIS are /dev/ptypc and /dev/ptypd. The
--uart[1,2] switch can be used to connect the uarts to other devices.
-Use 'tip /dev/ttypc' to connect a terminal emulator to the uarts.
+By default, SIS emulates an ERC32 system. The -leon3 switch
+enables emulation of a LEON3 SOC system.
+
+The emulated console uart is connected to stdin/stdout. The -uart[1,2]
+switch can be used to connect the uarts to other devices.
+
The '-nfp' will disable the simulated FPU, so each FPU instruction will
generate a FPU disabled trap. The '-freq' switch can be used to define
which "frequency" the simulator runs at. This is used by the 'perf'
command to calculated the MIPS figure for a particular configuration.
-The give frequency must be an integer indicating the frequency in MHz.
+The frequency must be an integer indicating the frequency in MHz.
The -c option indicates that sis commands should be read from 'batch_file'
at startup.
-Files to be loaded must be in one of the supported formats (see INSTALLATION),
-and will be loaded into the simulated memory. The file formats are
-automatically recognised.
+Files to be loaded must be in one of the supported formats (elf, a.out, srec),
+and will be loaded into the simulated memory.
-The script 'startsim' will start the simulator in one xterm window and
-open a terminal emulator (tip) connected to the UART A in a second
-xterm window. Below is description of commands that are recognized by
+Below is description of commands that are recognized by
the simulator. The command-line is parsed using GNU readline. A command
history of 64 commands is maintained. Use the up/down arrows to recall
previous commands. For more details, see the readline documentation.
@@ -77,8 +77,8 @@ Prints the FPU registers
go <address> [inst_count]
The go command will set pc to <address> and npc to <address> + 4, and start
-execution. No other initialisation will be done. If inst_count is given,
-execution will stop after the specified number of instructions.
+execution. If inst_count is given, execution will stop after the specified
+number of instructions.
help
@@ -146,14 +146,20 @@ interpreted as 'cont'.
3. Simulator core
-The SIS emulates the behavior of the 90C601E and 90C602E sparc IU and
-FPU from Matra MHS. These are roughly equivalent to the Cypress C601
-and C602. The simulator is cycle true, i.e a simulator time is
-maintained and inremented according the IU and FPU instruction timing.
+In ERC32 mode, SIS emulates the behavior of the 90C601E and 90C602E
+sparc IU and FPU from Matra MHS. These are roughly equivalent to the
+Cypress C601 and C602. The simulator is cycle true, i.e a simulator time is
+maintained and incremented according the IU and FPU instruction timing.
The parallel execution between the IU and FPU is modelled, as well as
-stalls due to operand dependencies (FPU). The core interacts with the
-user-defined memory modules through a number of functions. The memory
-module must provide the following functions:
+stalls due to operand dependencies (FPU).
+
+In Leon3 mode, the core emulates the Leon3 SPARC V8 core from
+Gaisler Research. All SPARC V8 instructions are supported but
+emulation is not fully cycle-true as the cache is not emulated.
+
+The core interacts with the user-defined memory modules through
+a number of functions. The memory module must provide the following
+functions:
int memory_read(asi,addr,data,ws)
int asi;
@@ -272,7 +278,7 @@ See 'erc32.c' for examples on how to use events and interrupts.
5. Memory module
-The supplied memory module (erc32.c) emulates the functions of memory and
+The ERC32 memory module (erc32.c) emulates the functions of memory and
the MEC asic developed for the 90C601/2. It includes the following functions:
* UART A & B
@@ -284,28 +290,27 @@ the MEC asic developed for the 90C601/2. It includes the following functions:
* 512 Kbyte ROM
* 4 Mbyte RAM
-See README.erc32 on how the MEC functions are emulated. For a detailed MEC
-specification, look at the ERC32 home page at URL:
+See README.erc32 on how the MEC functions are emulated.
-http://www.estec.esa.nl/wsmwww/erc32
+The Leon3 memory module (leon3.c) emulates on-chip peripherals and
+external memory for a simple Leon3 system. The modules includes the
+following functions:
-6. Compile and linking programs
+* AHB and APB buses with plug&play
+* UART (APBUART)
+* Interrupt controller (IRQMP)
+* Timer unit with two timers (GPTIMER)
+* PROM/SRAM memory controller (SRCTRL)
+* 16 Mbyte PROM, 16 Mbyte SRAM
-The directory 'examples' contain some code fragments for SIS.
-The script gccx indicates how the native sunos gcc and linker can be used
-to produce executables for the simulator. To compile and link the provided
-'hello.c', type 'gccx hello.c'. This will build the executable 'hello'.
-Start the simulator by running 'startsim hello', and issue the command 'run.
-After the program is terminated, the IU will be force to error mode through
-a software trap and halt.
+See README.leon3 for further details on Leon3 emulation.
-The programs are linked with a start-up file, srt0.S. This file includes
-the traptable and window underflow/overflow trap routines.
+6. Compile and linking programs
7. IU and FPU instruction timing.
-The simulator provides cycle true simulation. The following table shows
-the emulated instruction timing for 90C601E & 90C602E:
+The simulator provides cycle true simulation for ERC32. The following table
+shows the emulated instruction timing for 90C601E & 90C602E:
Instructions Cycles
diff --git a/sim/erc32/erc32.c b/sim/erc32/erc32.c
index 81a1d53..9c0e724 100644
--- a/sim/erc32/erc32.c
+++ b/sim/erc32/erc32.c
@@ -1635,19 +1635,20 @@ memory_iread(uint32 addr, uint32 *data, int32 *ws)
}
static int
-memory_read(asi, addr, data, sz, ws)
- int32 asi;
+memory_read(addr, data, sz, ws)
uint32 addr;
uint32 *data;
int32 sz;
int32 *ws;
{
int32 mexc;
+ int32 asi;
#ifdef ERRINJ
if (errmec) {
if (sis_verbose)
printf("Inserted MEC error %d\n",errmec);
+ if (sregs.psr & 0x080) asi = 11; else asi = 10;
set_sfsr(errmec, addr, asi, 1);
if (errmec == 5) mecparerror();
if (errmec == 6) iucomperr();
@@ -1661,6 +1662,7 @@ memory_read(asi, addr, data, sz, ws)
*ws = mem_ramr_ws;
return (0);
} else if ((addr >= MEC_START) && (addr < MEC_END)) {
+ if (sregs.psr & 0x080) asi = 11; else asi = 10;
mexc = mec_read(addr, asi, data);
if (mexc) {
set_sfsr(MEC_ACC, addr, asi, 1);
@@ -1700,19 +1702,30 @@ memory_read(asi, addr, data, sz, ws)
}
printf("Memory exception at %x (illegal address)\n", addr);
+ if (sregs.psr & 0x080) asi = 11; else asi = 10;
set_sfsr(UIMP_ACC, addr, asi, 1);
*ws = MEM_EX_WS;
return (1);
}
static int
-memory_write(asi, addr, data, sz, ws)
+memory_read_asi(asi, addr, data, sz, ws)
int32 asi;
uint32 addr;
uint32 *data;
int32 sz;
int32 *ws;
{
+ return(memory_read(addr, data, sz, ws));
+}
+
+static int
+memory_write(addr, data, sz, ws)
+ uint32 addr;
+ uint32 *data;
+ int32 sz;
+ int32 *ws;
+{
uint32 byte_addr;
uint32 byte_mask;
uint32 waddr;
@@ -1720,11 +1733,13 @@ memory_write(asi, addr, data, sz, ws)
int32 mexc;
int i;
int wphit[2];
+ int32 asi;
#ifdef ERRINJ
if (errmec) {
if (sis_verbose)
printf("Inserted MEC error %d\n",errmec);
+ if (sregs.psr & 0x080) asi = 11; else asi = 10;
set_sfsr(errmec, addr, asi, 0);
if (errmec == 5) mecparerror();
if (errmec == 6) iucomperr();
@@ -1737,6 +1752,7 @@ memory_write(asi, addr, data, sz, ws)
if (mem_accprot) {
waddr = (addr & 0x7fffff) >> 2;
+ if (sregs.psr & 0x080) asi = 11; else asi = 10;
for (i = 0; i < 2; i++)
wphit[i] =
(((asi == 0xa) && (mec_wpr[i] & 1)) ||
@@ -1760,6 +1776,7 @@ memory_write(asi, addr, data, sz, ws)
return (0);
} else if ((addr >= MEC_START) && (addr < MEC_END)) {
+ if (sregs.psr & 0x080) asi = 11; else asi = 10;
if ((sz != 2) || (asi != 0xb)) {
set_sfsr(MEC_ACC, addr, asi, 0);
*ws = MEM_EX_WS;
@@ -1816,10 +1833,22 @@ memory_write(asi, addr, data, sz, ws)
}
*ws = MEM_EX_WS;
+ if (sregs.psr & 0x080) asi = 11; else asi = 10;
set_sfsr(UIMP_ACC, addr, asi, 0);
return (1);
}
+static int
+memory_write_asi(asi, addr, data, sz, ws)
+ int32 asi;
+ uint32 addr;
+ uint32 *data;
+ int32 sz;
+ int32 *ws;
+{
+ return(memory_write(addr, data, sz, ws));
+}
+
static unsigned char *
get_mem_ptr(addr, size)
uint32 addr;
@@ -1863,6 +1892,12 @@ sis_memory_read(addr, data, length)
uint32 length;
{
char *mem;
+ int ws;
+
+ if (length == 4) {
+ memory_read(addr, data, length, &ws);
+ return(4);
+ }
if ((mem = get_mem_ptr(addr, length)) == ((char *) -1))
return (0);
@@ -1871,7 +1906,7 @@ sis_memory_read(addr, data, length)
return (length);
}
-void
+static void
boot_init (void)
{
mec_write(MEC_WCR, 0); /* zero waitstates */
@@ -1895,7 +1930,10 @@ const struct memsys erc32sys = {
restore_stdio,
memory_iread,
memory_read,
+ memory_read_asi,
memory_write,
+ memory_write_asi,
sis_memory_write,
- sis_memory_read
+ sis_memory_read,
+ boot_init
};
diff --git a/sim/erc32/exec.c b/sim/erc32/exec.c
index ec865ee..4f2ebb1 100644
--- a/sim/erc32/exec.c
+++ b/sim/erc32/exec.c
@@ -1065,17 +1065,17 @@ dispatch_instruction (sregs)
*rdd = sregs->psr;
break;
case RDY:
- if (!sparclite)
+ if ((!sparclite) && (cputype != CPU_LEON3))
*rdd = sregs->y;
else {
int rs1_is_asr = (sregs->inst >> 14) & 0x1f;
if ( 0 == rs1_is_asr )
*rdd = sregs->y;
- else if ( 17 == rs1_is_asr )
+ else if ( 17 == rs1_is_asr ) {
*rdd = sregs->asr17;
+ }
else {
sregs->trap = TRAP_UNIMP;
- break;
}
}
break;
@@ -1121,13 +1121,19 @@ dispatch_instruction (sregs)
((rs1 ^ operand2) & 0xfffff000);
break;
case WRY:
- if (!sparclite)
+ if ((!sparclite) && (cputype != CPU_LEON3))
sregs->y = (rs1 ^ operand2);
else {
if ( 0 == rd )
sregs->y = (rs1 ^ operand2);
- else if ( 17 == rd )
- sregs->asr17 = (rs1 ^ operand2);
+ else if ( 17 == rd ) {
+ if (sparclite)
+ sregs->asr17 = (rs1 ^ operand2);
+ }
+ else if ( 19 == rd ) {
+ if (cputype == CPU_LEON3)
+ wait_for_irq();
+ }
else {
sregs->trap = TRAP_UNIMP;
break;
@@ -1227,6 +1233,32 @@ dispatch_instruction (sregs)
switch (op3) {
case LDDA:
if (!chk_asi(sregs, &asi, op3)) break;
+ if (address & 0x7) {
+ sregs->trap = TRAP_UNALI;
+ break;
+ }
+ if (rd & 1) {
+ rd &= 0x1e;
+ if (rd > 7)
+ rdd = &(sregs->r[(cwp + rd) & 0x7f]);
+ else
+ rdd = &(sregs->g[rd]);
+ }
+ mexc = ms->memory_read_asi(asi, address, ddata, 2, &ws);
+ sregs->hold += ws;
+ mexc |= ms->memory_read_asi(asi, address+4, &ddata[1], 2, &ws);
+ sregs->hold += ws;
+ sregs->icnt = T_LDD;
+ if (mexc) {
+ sregs->trap = TRAP_DEXC;
+ } else {
+ rdd[0] = ddata[0];
+ rdd[1] = ddata[1];
+#ifdef STAT
+ sregs->nload++; /* Double load counts twice */
+#endif
+ }
+ break;
case LDD:
if (address & 0x7) {
sregs->trap = TRAP_UNALI;
@@ -1239,9 +1271,9 @@ dispatch_instruction (sregs)
else
rdd = &(sregs->g[rd]);
}
- mexc = ms->memory_read(asi, address, ddata, 2, &ws);
+ mexc = ms->memory_read(address, ddata, 2, &ws);
sregs->hold += ws;
- mexc |= ms->memory_read(asi, address+4, &ddata[1], 2, &ws);
+ mexc |= ms->memory_read(address+4, &ddata[1], 2, &ws);
sregs->hold += ws;
sregs->icnt = T_LDD;
if (mexc) {
@@ -1257,12 +1289,24 @@ dispatch_instruction (sregs)
case LDA:
if (!chk_asi(sregs, &asi, op3)) break;
+ if (address & 0x3) {
+ sregs->trap = TRAP_UNALI;
+ break;
+ }
+ mexc = ms->memory_read_asi(asi, address, &data, 2, &ws);
+ sregs->hold += ws;
+ if (mexc) {
+ sregs->trap = TRAP_DEXC;
+ } else {
+ *rdd = data;
+ }
+ break;
case LD:
if (address & 0x3) {
sregs->trap = TRAP_UNALI;
break;
}
- mexc = ms->memory_read(asi, address, &data, 2, &ws);
+ mexc = ms->memory_read(address, &data, 2, &ws);
sregs->hold += ws;
if (mexc) {
sregs->trap = TRAP_DEXC;
@@ -1272,8 +1316,27 @@ dispatch_instruction (sregs)
break;
case LDSTUBA:
if (!chk_asi(sregs, &asi, op3)) break;
+ mexc = ms->memory_read_asi(asi, address, &data, 0, &ws);
+ sregs->hold += ws;
+ sregs->icnt = T_LDST;
+ if (mexc) {
+ sregs->trap = TRAP_DEXC;
+ break;
+ }
+ data = extract_byte(data, address);
+ *rdd = data;
+ data = 0x0ff;
+ mexc = ms->memory_write_asi(asi, address, &data, 0, &ws);
+ sregs->hold += ws;
+ if (mexc) {
+ sregs->trap = TRAP_DEXC;
+ }
+#ifdef STAT
+ sregs->nload++;
+#endif
+ break;
case LDSTUB:
- mexc = ms->memory_read(asi, address, &data, 0, &ws);
+ mexc = ms->memory_read(address, &data, 0, &ws);
sregs->hold += ws;
sregs->icnt = T_LDST;
if (mexc) {
@@ -1283,7 +1346,7 @@ dispatch_instruction (sregs)
data = extract_byte(data, address);
*rdd = data;
data = 0x0ff;
- mexc = ms->memory_write(asi, address, &data, 0, &ws);
+ mexc = ms->memory_write(address, &data, 0, &ws);
sregs->hold += ws;
if (mexc) {
sregs->trap = TRAP_DEXC;
@@ -1295,9 +1358,21 @@ dispatch_instruction (sregs)
case LDSBA:
case LDUBA:
if (!chk_asi(sregs, &asi, op3)) break;
+ mexc = ms->memory_read_asi(asi, address, &data, 0, &ws);
+ sregs->hold += ws;
+ if (mexc) {
+ sregs->trap = TRAP_DEXC;
+ break;
+ }
+ if (op3 == LDSB)
+ data = extract_byte_signed(data, address);
+ else
+ data = extract_byte(data, address);
+ *rdd = data;
+ break;
case LDSB:
case LDUB:
- mexc = ms->memory_read(asi, address, &data, 0, &ws);
+ mexc = ms->memory_read(address, &data, 0, &ws);
sregs->hold += ws;
if (mexc) {
sregs->trap = TRAP_DEXC;
@@ -1312,13 +1387,29 @@ dispatch_instruction (sregs)
case LDSHA:
case LDUHA:
if (!chk_asi(sregs, &asi, op3)) break;
+ if (address & 0x1) {
+ sregs->trap = TRAP_UNALI;
+ break;
+ }
+ mexc = ms->memory_read_asi(asi, address, &data, 1, &ws);
+ sregs->hold += ws;
+ if (mexc) {
+ sregs->trap = TRAP_DEXC;
+ break;
+ }
+ if (op3 == LDSH)
+ data = extract_short_signed(data, address);
+ else
+ data = extract_short(data, address);
+ *rdd = data;
+ break;
case LDSH:
case LDUH:
if (address & 0x1) {
sregs->trap = TRAP_UNALI;
break;
}
- mexc = ms->memory_read(asi, address, &data, 1, &ws);
+ mexc = ms->memory_read(address, &data, 1, &ws);
sregs->hold += ws;
if (mexc) {
sregs->trap = TRAP_DEXC;
@@ -1344,7 +1435,7 @@ dispatch_instruction (sregs)
(sregs->frs2 == rd))
sregs->fhold += (sregs->ftime - ebase.simtime);
}
- mexc = ms->memory_read(asi, address, &data, 2, &ws);
+ mexc = ms->memory_read(address, &data, 2, &ws);
sregs->hold += ws;
sregs->flrd = rd;
sregs->ltime = ebase.simtime + sregs->icnt + FLSTHOLD +
@@ -1370,9 +1461,9 @@ dispatch_instruction (sregs)
((sregs->frs2 >> 1) == (rd >> 1)))
sregs->fhold += (sregs->ftime - ebase.simtime);
}
- mexc = ms->memory_read(asi, address, ddata, 2, &ws);
+ mexc = ms->memory_read(address, ddata, 2, &ws);
sregs->hold += ws;
- mexc |= ms->memory_read(asi, address+4, &ddata[1], 2, &ws);
+ mexc |= ms->memory_read(address+4, &ddata[1], 2, &ws);
sregs->hold += ws;
sregs->icnt = T_LDD;
if (mexc) {
@@ -1401,7 +1492,7 @@ dispatch_instruction (sregs)
sregs->trap = TRAP_UNALI;
break;
}
- mexc = ms->memory_read(asi, address, &data, 2, &ws);
+ mexc = ms->memory_read(address, &data, 2, &ws);
sregs->hold += ws;
if (mexc) {
sregs->trap = TRAP_DEXC;
@@ -1423,7 +1514,7 @@ dispatch_instruction (sregs)
if (ebase.simtime < sregs->ftime) {
sregs->fhold += (sregs->ftime - ebase.simtime);
}
- mexc = ms->memory_write(asi, address, &sregs->fsr, 2, &ws);
+ mexc = ms->memory_write(address, &sregs->fsr, 2, &ws);
sregs->hold += ws;
if (mexc) {
sregs->trap = TRAP_DEXC;
@@ -1432,12 +1523,22 @@ dispatch_instruction (sregs)
case STA:
if (!chk_asi(sregs, &asi, op3)) break;
+ if (address & 0x3) {
+ sregs->trap = TRAP_UNALI;
+ break;
+ }
+ mexc = ms->memory_write_asi(asi, address, rdd, 2, &ws);
+ sregs->hold += ws;
+ if (mexc) {
+ sregs->trap = TRAP_DEXC;
+ }
+ break;
case ST:
if (address & 0x3) {
sregs->trap = TRAP_UNALI;
break;
}
- mexc = ms->memory_write(asi, address, rdd, 2, &ws);
+ mexc = ms->memory_write(address, rdd, 2, &ws);
sregs->hold += ws;
if (mexc) {
sregs->trap = TRAP_DEXC;
@@ -1445,8 +1546,14 @@ dispatch_instruction (sregs)
break;
case STBA:
if (!chk_asi(sregs, &asi, op3)) break;
+ mexc = ms->memory_write_asi(asi, address, rdd, 0, &ws);
+ sregs->hold += ws;
+ if (mexc) {
+ sregs->trap = TRAP_DEXC;
+ }
+ break;
case STB:
- mexc = ms->memory_write(asi, address, rdd, 0, &ws);
+ mexc = ms->memory_write(address, rdd, 0, &ws);
sregs->hold += ws;
if (mexc) {
sregs->trap = TRAP_DEXC;
@@ -1454,6 +1561,28 @@ dispatch_instruction (sregs)
break;
case STDA:
if (!chk_asi(sregs, &asi, op3)) break;
+ if (address & 0x7) {
+ sregs->trap = TRAP_UNALI;
+ break;
+ }
+ if (rd & 1) {
+ rd &= 0x1e;
+ if (rd > 7)
+ rdd = &(sregs->r[(cwp + rd) & 0x7f]);
+ else
+ rdd = &(sregs->g[rd]);
+ }
+ mexc = ms->memory_write_asi(asi, address, rdd, 3, &ws);
+ sregs->hold += ws;
+ sregs->icnt = T_STD;
+#ifdef STAT
+ sregs->nstore++; /* Double store counts twice */
+#endif
+ if (mexc) {
+ sregs->trap = TRAP_DEXC;
+ break;
+ }
+ break;
case STD:
if (address & 0x7) {
sregs->trap = TRAP_UNALI;
@@ -1466,7 +1595,7 @@ dispatch_instruction (sregs)
else
rdd = &(sregs->g[rd]);
}
- mexc = ms->memory_write(asi, address, rdd, 3, &ws);
+ mexc = ms->memory_write(address, rdd, 3, &ws);
sregs->hold += ws;
sregs->icnt = T_STD;
#ifdef STAT
@@ -1495,7 +1624,7 @@ dispatch_instruction (sregs)
break;
}
rdd = &(sregs->fpq[0]);
- mexc = ms->memory_write(asi, address, rdd, 3, &ws);
+ mexc = ms->memory_write(address, rdd, 3, &ws);
sregs->hold += ws;
sregs->icnt = T_STD;
#ifdef STAT
@@ -1511,12 +1640,22 @@ dispatch_instruction (sregs)
break;
case STHA:
if (!chk_asi(sregs, &asi, op3)) break;
+ if (address & 0x1) {
+ sregs->trap = TRAP_UNALI;
+ break;
+ }
+ mexc = ms->memory_write_asi(asi, address, rdd, 1, &ws);
+ sregs->hold += ws;
+ if (mexc) {
+ sregs->trap = TRAP_DEXC;
+ }
+ break;
case STH:
if (address & 0x1) {
sregs->trap = TRAP_UNALI;
break;
}
- mexc = ms->memory_write(asi, address, rdd, 1, &ws);
+ mexc = ms->memory_write(address, rdd, 1, &ws);
sregs->hold += ws;
if (mexc) {
sregs->trap = TRAP_DEXC;
@@ -1535,7 +1674,7 @@ dispatch_instruction (sregs)
if (sregs->frd == rd)
sregs->fhold += (sregs->ftime - ebase.simtime);
}
- mexc = ms->memory_write(asi, address, &sregs->fsi[rd], 2, &ws);
+ mexc = ms->memory_write(address, &sregs->fsi[rd], 2, &ws);
sregs->hold += ws;
if (mexc) {
sregs->trap = TRAP_DEXC;
@@ -1555,7 +1694,7 @@ dispatch_instruction (sregs)
if ((sregs->frd == rd) || (sregs->frd + 1 == rd))
sregs->fhold += (sregs->ftime - ebase.simtime);
}
- mexc = ms->memory_write(asi, address, &sregs->fsi[rd], 3, &ws);
+ mexc = ms->memory_write(address, &sregs->fsi[rd], 3, &ws);
sregs->hold += ws;
sregs->icnt = T_STD;
#ifdef STAT
@@ -1567,18 +1706,40 @@ dispatch_instruction (sregs)
break;
case SWAPA:
if (!chk_asi(sregs, &asi, op3)) break;
+ if (address & 0x3) {
+ sregs->trap = TRAP_UNALI;
+ break;
+ }
+ mexc = ms->memory_read_asi(asi, address, &data, 2, &ws);
+ sregs->hold += ws;
+ if (mexc) {
+ sregs->trap = TRAP_DEXC;
+ break;
+ }
+ mexc = ms->memory_write_asi(asi, address, rdd, 2, &ws);
+ sregs->hold += ws;
+ sregs->icnt = T_LDST;
+ if (mexc) {
+ sregs->trap = TRAP_DEXC;
+ break;
+ } else
+ *rdd = data;
+#ifdef STAT
+ sregs->nload++;
+#endif
+ break;
case SWAP:
if (address & 0x3) {
sregs->trap = TRAP_UNALI;
break;
}
- mexc = ms->memory_read(asi, address, &data, 2, &ws);
+ mexc = ms->memory_read(address, &data, 2, &ws);
sregs->hold += ws;
if (mexc) {
sregs->trap = TRAP_DEXC;
break;
}
- mexc = ms->memory_write(asi, address, rdd, 2, &ws);
+ mexc = ms->memory_write(address, rdd, 2, &ws);
sregs->hold += ws;
sregs->icnt = T_LDST;
if (mexc) {
@@ -1814,7 +1975,7 @@ fpexec(op3, rd, rs1, rs2, sregs)
sregs->ftime += T_FDIVd;
break;
case FMOVs:
- sregs->fs[rd] = sregs->fs[rs2];
+ sregs->fsi[rd] = sregs->fsi[rs2];
sregs->ftime += T_FMOVs;
sregs->frs1 = 32; /* rs1 ignored */
break;
@@ -1996,7 +2157,7 @@ execute_trap(sregs)
sregs->pc = sregs->tbr;
sregs->npc = sregs->tbr + 4;
- if ( 0 != (1 & sregs->asr17) ) {
+ if ( 0 != (1 & (sregs->asr17 >> 13)) ) {
/* single vector trapping! */
sregs->pc = sregs->tbr & 0xfffff000;
sregs->npc = sregs->pc + 4;
@@ -2043,7 +2204,10 @@ init_regs(sregs)
sregs->npc = 4;
sregs->trap = 0;
sregs->psr &= 0x00f03fdf;
- sregs->psr |= 0x11000080; /* Set supervisor bit */
+ if (cputype == CPU_LEON3)
+ sregs->psr |= 0xF3000080; /* Set supervisor bit */
+ else
+ sregs->psr |= 0x11000080; /* Set supervisor bit */
sregs->breakpoint = 0;
sregs->annul = 0;
sregs->fpstate = FP_EXE_MODE;
@@ -2072,4 +2236,8 @@ init_regs(sregs)
sregs->rett_err = 0;
sregs->jmpltime = 0;
+ if (cputype == CPU_LEON3) {
+ sregs->asr17 = 0x107;
+ if (!nfp) sregs->asr17 |= (3 << 10); /* Meiko FPU */
+ }
}
diff --git a/sim/erc32/func.c b/sim/erc32/func.c
index 7a67430..ed303e4 100644
--- a/sim/erc32/func.c
+++ b/sim/erc32/func.c
@@ -46,7 +46,7 @@ struct irqcell irqarr[16];
int ctrl_c = 0;
int sis_verbose = 0;
-char *sis_version = "2.7.5";
+char *sis_version = "2.8";
int nfp = 0;
int ift = 0;
int wrp = 0;
@@ -61,6 +61,7 @@ uint32 last_load_addr = 0;
int nouartrx = 0;
host_callback *sim_callback;
const struct memsys *ms = &erc32sys;
+int cputype = 0; /* 0 = erc32, 3 = leon3 */
#ifdef ERRINJ
uint32 errcnt = 0;
@@ -483,7 +484,7 @@ exec_cmd(sregs, cmd)
sregs->pc = len & ~3;
sregs->npc = sregs->pc + 4;
if ((sregs->pc != 0) && (ebase.simtime == 0))
- boot_init();
+ ms->boot_init();
printf("resuming at 0x%08x\n",sregs->pc);
if ((cmd2 = strtok(NULL, " \t\n\r")) != NULL) {
stat = run_sim(sregs, VAL(cmd2), 0);
@@ -559,6 +560,11 @@ exec_cmd(sregs, cmd)
ebase.simtime = 0;
reset_all();
reset_stat(sregs);
+ if (last_load_addr != 0) {
+ sregs->pc = last_load_addr & ~3;
+ sregs->npc = sregs->pc + 4;
+ }
+ if ((sregs->pc != 0) && (ebase.simtime == 0)) ms->boot_init();
if ((cmd1 = strtok(NULL, " \t\n\r")) == NULL) {
stat = run_sim(sregs, UINT64_MAX, 0);
} else {
@@ -612,6 +618,11 @@ exec_cmd(sregs, cmd)
ebase.simtime = 0;
reset_all();
reset_stat(sregs);
+ if (last_load_addr != 0) {
+ sregs->pc = last_load_addr & ~3;
+ sregs->npc = sregs->pc + 4;
+ }
+ if ((sregs->pc != 0) && (ebase.simtime == 0)) ms->boot_init();
sregs->tlimit = limcalc(sregs->freq);
stat = run_sim(sregs, UINT64_MAX, 0);
daddr = sregs->pc;
@@ -649,8 +660,8 @@ void
show_stat(sregs)
struct pstate *sregs;
{
- uint32 iinst;
- uint32 stime;
+ uint64 iinst;
+ uint64 stime;
if (sregs->tottime == 0.0)
sregs->tottime += 1E-6;
@@ -665,37 +676,37 @@ show_stat(sregs)
printf(" Instructions : %9" PRIu64 "\n", sregs->ninst);
#ifdef STAT
- printf(" integer : %9.2f %%\n", 100.0 * (float) iinst / (float) sregs->ninst);
+ printf(" integer : %9.2f %%\n", 100.0 * (double) iinst / (double) sregs->ninst);
printf(" load : %9.2f %%\n",
- 100.0 * (float) sregs->nload / (float) sregs->ninst);
+ 100.0 * (double) sregs->nload / (double) sregs->ninst);
printf(" store : %9.2f %%\n",
- 100.0 * (float) sregs->nstore / (float) sregs->ninst);
+ 100.0 * (double) sregs->nstore / (double) sregs->ninst);
printf(" branch : %9.2f %%\n",
- 100.0 * (float) sregs->nbranch / (float) sregs->ninst);
+ 100.0 * (double) sregs->nbranch / (double) sregs->ninst);
printf(" float : %9.2f %%\n",
- 100.0 * (float) sregs->finst / (float) sregs->ninst);
+ 100.0 * (double) sregs->finst / (double) sregs->ninst);
printf(" Integer CPI : %9.2f\n",
- ((float) (stime - sregs->pwdtime - sregs->fholdt - sregs->finst))
+ ((double) (stime - sregs->pwdtime - sregs->fholdt - sregs->finst))
/
- (float) (sregs->ninst - sregs->finst));
+ (double) (sregs->ninst - sregs->finst));
printf(" Float CPI : %9.2f\n",
- ((float) sregs->fholdt / (float) sregs->finst) + 1.0);
+ ((double) sregs->fholdt / (double) sregs->finst) + 1.0);
#endif
printf(" Overall CPI : %9.2f\n",
- (float) (stime - sregs->pwdtime) / (float) sregs->ninst);
- printf("\n ERC32 performance (%4.1f MHz): %5.2f MOPS (%5.2f MIPS, %5.2f MFLOPS)\n",
- sregs->freq, sregs->freq * (float) sregs->ninst / (float) (stime - sregs->pwdtime),
- sregs->freq * (float) (sregs->ninst - sregs->finst) /
- (float) (stime - sregs->pwdtime),
- sregs->freq * (float) sregs->finst / (float) (stime - sregs->pwdtime));
- printf(" Simulated ERC32 time : %.2f s\n",
- (float) (ebase.simtime - sregs->simstart) / 1000000.0 / sregs->freq);
+ (double) (stime - sregs->pwdtime) / (double) sregs->ninst);
+ printf("\n CPU performance (%4.1f MHz) : %5.2f MOPS (%5.2f MIPS, %5.2f MFLOPS)\n",
+ sregs->freq, sregs->freq * (double) sregs->ninst / (double) (stime - sregs->pwdtime),
+ sregs->freq * (double) (sregs->ninst - sregs->finst) /
+ (double) (stime - sregs->pwdtime),
+ sregs->freq * (double) sregs->finst / (double) (stime - sregs->pwdtime));
+ printf(" Simulated CPU time : %.2f s\n",
+ (double) (ebase.simtime - sregs->simstart) / 1000000.0 / sregs->freq);
printf(" Processor utilisation : %.2f %%\n",
- 100.0 * (1.0 - ((float) sregs->pwdtime / (float) stime)));
+ 100.0 * (1.0 - ((double) sregs->pwdtime / (double) stime)));
printf(" Real-time performance : %.2f %%\n",
- 100.0 / (sregs->tottime / ((double) (stime) / (sregs->freq * 1.0E6))));
+ 100.0 / (sregs->tottime / ((double) (stime) / (sregs->freq * 1.0E6))));
printf(" Simulator performance : %.2f MIPS\n",
- (double)(sregs->ninst) / sregs->tottime / 1E6);
+ (double)(sregs->ninst) / sregs->tottime / 1E6);
printf(" Used time (sys + user) : %.2f s\n\n", sregs->tottime);
}
diff --git a/sim/erc32/grlib.c b/sim/erc32/grlib.c
new file mode 100644
index 0000000..42a3ed0
--- /dev/null
+++ b/sim/erc32/grlib.c
@@ -0,0 +1,98 @@
+/*
+ * This file is part of SIS.
+ *
+ * SIS, SPARC instruction simulator. Copyright (C) 2014 Jiri Gaisler
+ *
+ * This program is free software; you can redistribute it and/or modify it under
+ * the terms of the GNU General Public License as published by the Free
+ * Software Foundation; either version 3 of the License, or (at your option)
+ * any later version.
+ *
+ * This program is distributed in the hope that it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program; if not, see <http://www.gnu.org/licenses/>.
+ *
+ */
+
+
+#include "sis.h"
+#include "grlib.h"
+
+
+/* APB PNP */
+
+static uint32 apbppmem[32*2]; /* 32-entry APB PP AREA */
+static int apbppindex;
+
+int grlib_apbpp_add(uint32 id, uint32 addr)
+{
+ apbppmem[apbppindex++] = id;
+ apbppmem[apbppindex++] = addr;
+ if(apbppindex >= (32*2)) apbppindex = 0; /* prevent overflow of area */
+ return(apbppindex);
+}
+
+uint32 grlib_apbpnp_read(uint32 addr)
+{
+ uint32 read_data;
+ addr &= 0xff;
+ read_data = apbppmem[addr>>2];
+
+ return read_data;
+}
+
+/* AHB PNP */
+
+static uint32 ahbppmem[128*8]; /* 128-entry AHB PP AREA */
+static int ahbmppindex;
+static int ahbsppindex = 64*8;
+
+int grlib_ahbmpp_add(uint32 id)
+{
+ ahbppmem[ahbmppindex] = id;
+ ahbmppindex += 8;
+ if(ahbmppindex >= (64*8)) ahbmppindex = 0; /* prevent overflow of area */
+ return(ahbmppindex);
+}
+
+int grlib_ahbspp_add(uint32 id, uint32 addr1, uint32 addr2,
+ uint32 addr3, uint32 addr4)
+{
+ ahbppmem[ahbsppindex] = id;
+ ahbsppindex += 4;
+ ahbppmem[ahbsppindex++] = addr1;
+ ahbppmem[ahbsppindex++] = addr2;
+ ahbppmem[ahbsppindex++] = addr3;
+ ahbppmem[ahbsppindex++] = addr4;
+ if(ahbsppindex >= (128*8)) ahbsppindex = 64*8; /* prevent overflow of area */
+ return(ahbsppindex);
+}
+
+uint32 grlib_ahbpnp_read(uint32 addr)
+{
+ uint32 read_data;
+
+ addr &= 0xfff;
+ read_data = ahbppmem[addr>>2];
+ return read_data;
+
+}
+
+void grlib_init()
+{
+ /* Add PP records for Leon3, APB bridge and interrupt controller
+ as this is not done elsewhere */
+
+ grlib_ahbmpp_add(GRLIB_PP_ID(VENDOR_GAISLER, GAISLER_LEON3, 0, 0));
+ grlib_ahbspp_add(GRLIB_PP_ID(VENDOR_GAISLER, GAISLER_APBMST, 0, 0),
+ GRLIB_PP_AHBADDR(0x80000000, 0xFFF, 0, 0, 2),
+ 0, 0, 0);
+
+ grlib_apbpp_add(GRLIB_PP_ID(VENDOR_GAISLER, GAISLER_IRQMP, 2, 0),
+ GRLIB_PP_APBADDR(0x80000200, 0xFFF));
+
+}
diff --git a/sim/erc32/grlib.h b/sim/erc32/grlib.h
new file mode 100644
index 0000000..4d52211
--- /dev/null
+++ b/sim/erc32/grlib.h
@@ -0,0 +1,57 @@
+/*
+ * This file is part of SIS.
+ *
+ * SIS, SPARC instruction simulator. Copyright (C) 2014 Jiri Gaisler
+ *
+ * This program is free software; you can redistribute it and/or modify it under
+ * the terms of the GNU General Public License as published by the Free
+ * Software Foundation; either version 3 of the License, or (at your option)
+ * any later version.
+ *
+ * This program is distributed in the hope that it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program; if not, see <http://www.gnu.org/licenses/>.
+ *
+ */
+
+
+/* Definitions for AMBA PNP in Gaisler Research GRLIB SOC */
+
+/* Vendors */
+#define VENDOR_GAISLER 1
+#define VENDOR_PENDER 2
+#define VENDOR_ESA 4
+#define VENDOR_DLR 10
+
+/* Devices */
+#define GAISLER_LEON3 0x003
+#define GAISLER_APBMST 0x006
+#define GAISLER_SRCTRL 0x008
+#define GAISLER_APBUART 0x00C
+#define GAISLER_IRQMP 0x00D
+#define GAISLER_GPTIMER 0x011
+#define ESA_MCTRL 0x00F
+
+/* How to build entries in the plug&play area */
+#define GRLIB_PP_ID(v, d, x, i) ((v & 0xff) << 24) | ((d & 0x3ff) << 12) |\
+ ((x & 0x1f) << 5) | (i & 0x1f)
+#define GRLIB_PP_AHBADDR(a, m, p, c, t) (a & 0xfff00000) | ((m & 0xfff) << 4) |\
+ ((p & 1) << 17) | ((c & 1) << 16) | (t & 0x3)
+#define GRLIB_PP_APBADDR(a, m) ((a & 0xfff00)<< 12) | ((m & 0xfff) << 4) | 1
+
+#define AHBPP_START 0xFFFFF000
+#define AHBPP_END 0xFFFFFFFF
+#define APBPP_START 0x800FF000
+#define APBPP_END 0x800FFFFF
+
+int grlib_apbpp_add(uint32 id, uint32 addr);
+int grlib_ahbmpp_add(uint32 id);
+int grlib_ahbspp_add(uint32 id, uint32 addr1, uint32 addr2,
+ uint32 addr3, uint32 addr4);
+uint32 grlib_ahbpnp_read(uint32 addr);
+uint32 grlib_apbpnp_read(uint32 addr);
+void grlib_init();
diff --git a/sim/erc32/interf.c b/sim/erc32/interf.c
index f87c86c..0172a01 100644
--- a/sim/erc32/interf.c
+++ b/sim/erc32/interf.c
@@ -53,7 +53,7 @@ run_sim(sregs, icount, dis)
sregs->starttime = get_time();
irq = 0;
if ((sregs->pc != 0) && (ebase.simtime == 0))
- boot_init();
+ ms->boot_init();
while (!sregs->err_mode & (icount > 0)) {
sregs->fhold = 0;
@@ -188,6 +188,10 @@ sim_open (kind, callback, abfd, argv)
if (strcmp(argv[stat], "-nouartrx") == 0) {
nouartrx = 1;
} else
+ if (strcmp(argv[stat], "-leon3") == 0) {
+ ms = &leon3;
+ cputype = CPU_LEON3;
+ } else
if (strcmp(argv[stat], "-wrp") == 0) {
wrp = 1;
} else
@@ -225,9 +229,21 @@ sim_open (kind, callback, abfd, argv)
stat++;
}
+ if (cputype == CPU_LEON3)
+ sregs.freq = freq ? freq : 50;
+ else
+ sregs.freq = freq ? freq : 14;
+
if (sis_verbose) {
(*sim_callback->printf_filtered) (sim_callback, "\n SIS - SPARC instruction simulator %s\n", sis_version);
- (*sim_callback->printf_filtered) (sim_callback, " Bug-reports to Jiri Gaisler ESA/ESTEC (jgais@wd.estec.esa.nl)\n");
+ (*sim_callback->printf_filtered) (sim_callback, " Bug-reports to Jiri Gaisler ESA/ESTEC (jiri@gaisler.se)\n\n");
+ switch (cputype) {
+ case CPU_LEON3:
+ (*sim_callback->printf_filtered) (sim_callback, "LEON3 emulation enabled\n");
+ break;
+ default:
+ (*sim_callback->printf_filtered) (sim_callback, "ERC32 emulation enabled\n");
+ }
if (nfp)
(*sim_callback->printf_filtered) (sim_callback, "no FPU\n");
if (sparclite)
@@ -236,11 +252,9 @@ sim_open (kind, callback, abfd, argv)
(*sim_callback->printf_filtered) (sim_callback, "dumb IO (no input, dumb output)\n");
if (sis_gdb_break == 0)
(*sim_callback->printf_filtered) (sim_callback, "disabling GDB trap handling for breakpoints\n");
- if (freq)
- (*sim_callback->printf_filtered) (sim_callback, " ERC32 freq %d Mhz\n", freq);
+ (*sim_callback->printf_filtered) (sim_callback, "CPU freq %3.1f MHz\n", sregs.freq);
}
- sregs.freq = freq ? freq : 15;
termsave = fcntl(0, F_GETFL, 0);
INIT_DISASSEMBLE_INFO(dinfo, stdout,(fprintf_ftype)fprintf);
#ifdef HOST_LITTLE_ENDIAN
@@ -458,7 +472,7 @@ flush_windows ()
#endif
for (i = 0; i < 16; i++)
- ms->memory_write (11, sp + 4 * i, &sregs.r[(win * 16 + 16 + i) & 0x7f], 2,
+ ms->memory_write (sp + 4 * i, &sregs.r[(win * 16 + 16 + i) & 0x7f], 2,
&ws);
if (win == cwp)
diff --git a/sim/erc32/leon3.c b/sim/erc32/leon3.c
new file mode 100644
index 0000000..35d24cc
--- /dev/null
+++ b/sim/erc32/leon3.c
@@ -0,0 +1,1017 @@
+/*
+ * This file is part of SIS.
+ *
+ * SIS, SPARC instruction simulator V2.5 Copyright (C) 1995 Jiri Gaisler,
+ * European Space Agency
+ *
+ * This program is free software; you can redistribute it and/or modify it under
+ * the terms of the GNU General Public License as published by the Free
+ * Software Foundation; either version 3 of the License, or (at your option)
+ * any later version.
+ *
+ * This program is distributed in the hope that it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program; if not, see <http://www.gnu.org/licenses/>.
+ *
+ * Leon3 emulation, loosely based on erc32.c.
+ */
+
+/* The control space devices. */
+
+#include "config.h"
+#include <errno.h>
+#include <sys/types.h>
+#include <stdio.h>
+#include <string.h>
+#include <termios.h>
+#include <sys/fcntl.h>
+#include <sys/file.h>
+#include <unistd.h>
+#include "sis.h"
+#include "grlib.h"
+#include "sim-config.h"
+
+static int tty_setup = 1;
+
+/* APB registers */
+#define APBSTART 0x80000000
+#define APBEND 0x80100000
+
+/* Memory exception waitstates. */
+#define MEM_EX_WS 1
+
+#define MOK 0
+
+/* LEON3 APB register addresses. */
+
+#define IRQMP_IPR 0x204
+#define IRQMP_IMR 0x240
+#define IRQMP_ICR 0x20C
+#define IRQMP_IFR 0x208
+#define GPTIMER_SCALER 0x300
+#define GPTIMER_SCLOAD 0x304
+#define GPTIMER_CONFIG 0x308
+#define GPTIMER_TIMER1 0x310
+#define GPTIMER_RELOAD1 0x314
+#define GPTIMER_CTRL1 0x318
+#define GPTIMER_TIMER2 0x320
+#define GPTIMER_RELOAD2 0x324
+#define GPTIMER_CTRL2 0x328
+
+#define APBUART_RXTX 0x100
+#define APBUART_STATUS 0x104
+
+/* Size of UART buffers (bytes). */
+#define UARTBUF 1024
+
+/* Number of simulator ticks between flushing the UARTS. */
+/* For good performance, keep above 1000. */
+#define UART_FLUSH_TIME 3000
+
+/* New uart defines. */
+#define UART_TX_TIME 1000
+#define UART_RX_TIME 1000
+#define UARTA_DR 0x1
+#define UARTA_SRE 0x2
+#define UARTA_HRE 0x4
+#define UARTA_OR 0x10
+
+/* IRQMP registers. */
+
+static uint32 irqmp_ipr;
+static uint32 irqmp_imr;
+static uint32 irqmp_ifr;
+
+/* GPTIMER registers. */
+
+#define NGPTIMERS 2
+#define GPTIMER_IRQ 8
+
+static uint32 gpt_scaler;
+static uint32 gpt_scaler_start;
+static uint32 gpt_counter[NGPTIMERS];
+static uint32 gpt_reload[NGPTIMERS];
+static uint32 gpt_ctrl[NGPTIMERS];
+
+/* ROM size 16 Mbyte. */
+#define ROM_START 0x00000000
+#define ROM_MASK 0x00ffffff
+#define ROM_END (ROM_START + ROM_MASK + 1)
+
+/* RAM size 16 Mbyte. */
+#define RAM_START 0x40000000
+#define RAM_MASK 0x00ffffff
+#define RAM_END (RAM_START + RAM_MASK + 1)
+
+/* Memory. */
+static unsigned char romb[ROM_END - ROM_START];
+static unsigned char ramb[RAM_END - RAM_START];
+static uint32 cache_ctrl;
+
+
+/* UART support variables. */
+
+/* File descriptor for input file. */
+static int32 fd1, fd2;
+
+/* UART status register */
+static int32 Ucontrol;
+
+static unsigned char aq[UARTBUF], bq[UARTBUF];
+static int32 anum, aind = 0;
+static int32 bnum, bind = 0;
+static char wbufa[UARTBUF], wbufb[UARTBUF];
+static unsigned wnuma;
+static unsigned wnumb;
+static FILE *f1in, *f1out;
+static struct termios ioc1, ioc2, iocold1, iocold2;
+static int f1open = 0;
+
+static char uarta_sreg, uarta_hreg;
+static uint32 uart_stat_reg;
+static uint32 uarta_data;
+
+/* Forward declarations. */
+
+static void mem_init (void);
+static void close_port (void);
+static void leon3_reset (void);
+static void irqmp_intack (int32 level);
+static void chk_irq (void);
+static void set_irq (int32 level);
+static int32 apb_read (uint32 addr, uint32 *data);
+static int apb_write (uint32 addr, uint32 data);
+static void port_init (void);
+static uint32 grlib_read_uart (uint32 addr);
+static void grlib_write_uart (uint32 addr, uint32 data);
+static void flush_uart (void);
+static void uarta_tx (void);
+static void uart_rx (caddr_t arg);
+static void uart_intr (caddr_t arg);
+static void uart_irq_start (void);
+static void gpt_intr (caddr_t arg);
+static void gpt_init (void);
+static void gpt_reset (void);
+static void gpt_scaler_set (uint32 val);
+static void timer_ctrl (uint32 val, int i);
+static unsigned char *
+ get_mem_ptr (uint32 addr, uint32 size);
+static void store_bytes (unsigned char *mem, uint32 waddr,
+ uint32 *data, int sz, int32 *ws);
+
+static host_callback *callback;
+
+
+/* One-time init. */
+
+static void
+init_sim(void)
+{
+ callback = sim_callback;
+ grlib_init();
+ mem_init();
+ port_init();
+ gpt_init();
+}
+
+/* Power-on reset init. */
+
+static void
+reset(void)
+{
+ leon3_reset();
+ uart_irq_start();
+ gpt_reset();
+}
+
+/* IU error mode manager. */
+
+static void
+error_mode(pc)
+ uint32 pc;
+{
+
+}
+
+
+/* Memory init. */
+
+static void
+mem_init(void)
+{
+
+/* Add AMBA P&P record for SRCTRL memory controller */
+
+ grlib_ahbspp_add(GRLIB_PP_ID(VENDOR_GAISLER, GAISLER_SRCTRL, 0, 0),
+ GRLIB_PP_AHBADDR(0x00000000, 0xE00, 1, 1, 2),
+ GRLIB_PP_AHBADDR(0x40000000, 0xC00, 1, 1, 2),
+ GRLIB_PP_AHBADDR(0x20000000, 0xE00, 0, 0, 2),
+ 0);
+ if (sis_verbose)
+ printf("RAM start: 0x%x, RAM size: %d K, ROM size: %d K\n",
+ RAM_START, (RAM_MASK+1)/1024, (ROM_MASK+1)/1024);
+}
+
+/* Flush ports when simulator stops. */
+
+static void
+sim_halt(void)
+{
+#ifdef FAST_UART
+ flush_uart();
+#endif
+}
+
+static void
+close_port(void)
+{
+ if (f1open && f1in != stdin)
+ fclose(f1in);
+}
+
+static void
+exit_sim(void)
+{
+ close_port();
+}
+
+static void
+leon3_reset(void)
+{
+ int i;
+
+ irqmp_ipr = 0;
+ irqmp_imr = 0;
+ irqmp_ifr = 0;
+
+ wnuma = wnumb = 0;
+ anum = aind = bnum = bind = 0;
+
+ uart_stat_reg = UARTA_SRE | UARTA_HRE;
+
+ gpt_counter[0] = 0xffffffff;
+ gpt_reload[0] = 0xffffffff;
+ gpt_scaler = 0xffff;
+ gpt_ctrl[0] = 0;
+ gpt_ctrl[1] = 0;
+
+}
+
+static void
+irqmp_intack(int32 level)
+{
+ int irq_test;
+
+ if (sis_verbose > 2)
+ printf("interrupt %d acknowledged\n", level);
+ if (irqmp_ifr & (1 << level))
+ irqmp_ifr &= ~(1 << level);
+ else
+ irqmp_ipr &= ~(1 << level);
+ chk_irq();
+}
+
+static void
+chk_irq(void)
+{
+ int32 i;
+ uint32 itmp;
+ int old_irl;
+
+ old_irl = ext_irl;
+ itmp = ((irqmp_ipr | irqmp_ifr) & irqmp_imr) & 0x0fffe;
+ ext_irl = 0;
+ if (itmp != 0) {
+ for (i = 15; i > 0; i--) {
+ if (((itmp >> i) & 1) != 0) {
+ if ((sis_verbose > 2) && (i > old_irl))
+ printf("IU irl: %d\n", i);
+ ext_irl = i;
+ set_int(i, irqmp_intack, i);
+ break;
+ }
+ }
+ }
+}
+
+static void
+set_irq(int32 level)
+{
+ irqmp_ipr |= (1 << level);
+ chk_irq();
+}
+
+static int32
+apb_read(uint32 addr, uint32 *data)
+{
+
+ switch (addr & 0xfff) {
+
+ case APBUART_RXTX: /* 0x100 */
+ case APBUART_STATUS: /* 0x104 */
+ *data = grlib_read_uart(addr);
+ break;
+
+ case IRQMP_IPR: /* 0x204 */
+ *data = irqmp_ipr;
+ break;
+
+ case IRQMP_IFR: /* 0x208 */
+ *data = irqmp_ifr;
+ break;
+
+ case IRQMP_IMR: /* 0x240 */
+ *data = irqmp_imr;
+ break;
+
+ case GPTIMER_SCALER: /* 0x300 */
+ *data = gpt_scaler - (now() - gpt_scaler_start);
+ break;
+
+ case GPTIMER_SCLOAD: /* 0x304 */
+ *data = gpt_scaler;
+ break;
+
+ case GPTIMER_CONFIG: /* 0x308 */
+ *data = 0x100 | (GPTIMER_IRQ << 3) | NGPTIMERS;
+ break;
+
+ case GPTIMER_TIMER1: /* 0x310 */
+ *data = gpt_counter[0];
+ break;
+
+ case GPTIMER_RELOAD1: /* 0x314 */
+ *data = gpt_reload[0];
+ break;
+
+ case GPTIMER_CTRL1: /* 0x318 */
+ *data = gpt_ctrl[0];
+ break;
+
+ case GPTIMER_TIMER2: /* 0x320 */
+ *data = gpt_counter[1];
+ break;
+
+ case GPTIMER_RELOAD2: /* 0x324 */
+ *data = gpt_reload[1];
+ break;
+
+ case GPTIMER_CTRL2: /* 0x328 */
+ *data = gpt_ctrl[1];
+ break;
+
+ default:
+ *data = 0;
+ break;
+ }
+
+ if (sis_verbose > 1)
+ printf("APB read a: %08x, d: %08x\n", addr, *data);
+
+ return (MOK);
+}
+
+static int
+apb_write(uint32 addr, uint32 data)
+{
+ if (sis_verbose > 1)
+ printf("APB write a: %08x, d: %08x\n",addr,data);
+ switch (addr & 0xfff) {
+
+ case APBUART_RXTX: /* 0x100 */
+ case APBUART_STATUS: /* 0x104 */
+ grlib_write_uart(addr, data);
+ break;
+
+ case IRQMP_IFR: /* 0x208 */
+ irqmp_ifr = data & 0xfffe;
+ chk_irq();
+ break;
+
+ case IRQMP_ICR: /* 0x20C */
+ irqmp_ipr &= ~data & 0x0fffe;
+ chk_irq();
+ break;
+
+ case IRQMP_IMR: /* 0x240 */
+ irqmp_imr = data & 0x7ffe;
+ chk_irq();
+ break;
+
+ case GPTIMER_SCLOAD: /* 0x304 */
+ gpt_scaler_set(data);
+ break;
+
+ case GPTIMER_TIMER1: /* 0x310 */
+ gpt_counter[0] = data;
+ break;
+
+ case GPTIMER_RELOAD1: /* 0x314 */
+ gpt_reload[0] = data;
+ break;
+
+ case GPTIMER_CTRL1: /* 0x318 */
+ timer_ctrl(data, 0);
+ break;
+
+ case GPTIMER_TIMER2: /* 0x320 */
+ gpt_counter[1] = data;
+ break;
+
+ case GPTIMER_RELOAD2: /* 0x324 */
+ gpt_reload[1] = data;
+ break;
+
+ case GPTIMER_CTRL2: /* 0x328 */
+ timer_ctrl(data, 1);
+ break;
+
+ default:
+ break;
+ }
+ return (MOK);
+}
+
+
+/* APBUART. */
+
+static int ifd1 = -1, ofd1 = -1;
+
+static void
+init_stdio(void)
+{
+ if (dumbio)
+ return;
+ if (ifd1 == 0 && f1open) {
+ tcsetattr(0, TCSANOW, &ioc1);
+ tcflush(ifd1, TCIFLUSH);
+ }
+}
+
+static void
+restore_stdio(void)
+{
+ if (dumbio)
+ return;
+ if (ifd1 == 0 && f1open && tty_setup)
+ tcsetattr(0, TCSANOW, &iocold1);
+}
+
+#define DO_STDIO_READ( _fd_, _buf_, _len_ ) \
+ ( dumbio || nouartrx \
+ ? (0) /* no bytes read, no delay */ \
+ : (_fd_) == 1 && callback ? \
+ callback->read_stdin (callback, _buf_, _len_) : \
+ read( _fd_, _buf_, _len_ ) )
+
+
+static void
+port_init(void)
+{
+
+ f1in = stdin;
+ f1out = stdout;
+ if (uart_dev1[0] != 0)
+ if ((fd1 = open(uart_dev1, O_RDWR | O_NONBLOCK)) < 0) {
+ printf("Warning, couldn't open output device %s\n", uart_dev1);
+ } else {
+ if (sis_verbose)
+ printf("serial port A on %s\n", uart_dev1);
+ f1in = f1out = fdopen(fd1, "r+");
+ setbuf(f1out, NULL);
+ f1open = 1;
+ }
+ if (f1in) ifd1 = fileno(f1in);
+ if (ifd1 == 0) {
+ if (callback && !callback->isatty(callback, ifd1)) {
+ tty_setup = 0;
+ }
+ if (sis_verbose)
+ printf("serial port A on stdin/stdout\n");
+ if (!dumbio) {
+ tcgetattr(ifd1, &ioc1);
+ if (tty_setup) {
+ iocold1 = ioc1;
+ ioc1.c_lflag &= ~(ICANON | ECHO);
+ ioc1.c_cc[VMIN] = 0;
+ ioc1.c_cc[VTIME] = 0;
+ }
+ }
+ f1open = 1;
+ }
+
+ if (f1out) {
+ ofd1 = fileno(f1out);
+ if (!dumbio && tty_setup && ofd1 == 1) setbuf(f1out, NULL);
+ }
+
+ wnuma = 0;
+
+
+ grlib_apbpp_add(GRLIB_PP_ID(VENDOR_GAISLER, GAISLER_APBUART, 1, 3),
+ GRLIB_PP_APBADDR(0x80000100, 0xFFF));
+}
+
+static uint32
+grlib_read_uart(uint32 addr)
+{
+
+ unsigned tmp;
+
+ tmp = 0;
+ switch (addr & 0xff) {
+
+ case 0x00: /* UART 1 RX/TX */
+#ifndef _WIN32
+#ifdef FAST_UART
+
+ if (aind < anum) {
+ if ((aind + 1) < anum)
+ set_irq(3);
+ return ((uint32) aq[aind++]);
+ } else {
+ if (f1open) {
+ anum = DO_STDIO_READ(ifd1, aq, UARTBUF);
+ }
+ else {
+ anum = 0;
+ }
+ if (anum > 0) {
+ aind = 0;
+ if ((aind + 1) < anum)
+ set_irq(3);
+ return ((uint32) aq[aind++]);
+ } else {
+ return ((uint32) aq[aind]);
+ }
+
+ }
+#else
+ tmp = uarta_data;
+ uarta_data &= ~UART_DR;
+ uart_stat_reg &= ~UARTA_DR;
+ return tmp;
+#endif
+#else
+ return(0);
+#endif
+ break;
+
+ case 0x04: /* UART status register */
+#ifndef _WIN32
+#ifdef FAST_UART
+
+ Ucontrol = 0;
+ if (aind < anum) {
+ Ucontrol |= 0x00000001;
+ } else {
+ if (f1open) {
+ anum = DO_STDIO_READ(ifd1, aq, UARTBUF);
+ }
+ else {
+ anum = 0;
+ }
+ if (anum > 0) {
+ Ucontrol |= 0x00000001;
+ aind = 0;
+ set_irq(3);
+ }
+ }
+ Ucontrol |= 0x00000006;
+ return (Ucontrol);
+#else
+ return (uart_stat_reg);
+#endif
+#else
+ return(0x00060006);
+#endif
+ break;
+ default:
+ if (sis_verbose)
+ printf("Read from unimplemented MEC register (%x)\n", addr);
+
+ }
+ return 0;
+}
+
+static void
+grlib_write_uart(uint32 addr, uint32 data)
+{
+ unsigned char c;
+
+ c = (unsigned char) data;
+ switch (addr & 0xff) {
+
+ case 0x00: /* UART A */
+#ifdef FAST_UART
+ if (f1open) {
+ if (wnuma < UARTBUF)
+ wbufa[wnuma++] = c;
+ else {
+ while (wnuma) {
+ if (ofd1 == 1 && callback)
+ wnuma -= callback->write_stdout(callback, wbufa, wnuma);
+ else
+ wnuma -= fwrite(wbufa, 1, wnuma, f1out);
+ }
+ wbufa[wnuma++] = c;
+ }
+ }
+ set_irq(3);
+#else
+ if (uart_stat_reg & UARTA_SRE) {
+ uarta_sreg = c;
+ uart_stat_reg &= ~UARTA_SRE;
+ event(uarta_tx, 0, UART_TX_TIME);
+ } else {
+ uarta_hreg = c;
+ uart_stat_reg &= ~UARTA_HRE;
+ }
+#endif
+ break;
+
+ case 0x04: /* UART status register */
+#ifndef FAST_UART
+ uart_stat_reg &= 1;
+#endif
+ break;
+ default:
+ if (sis_verbose)
+ printf("Write to unimplemented APB register (%x)\n", addr);
+
+ }
+}
+
+static void
+flush_uart(void)
+{
+ while (wnuma && f1open) {
+ if (ofd1 == 1 && callback) {
+ wnuma -= callback->write_stdout(callback, wbufa, wnuma);
+ callback->flush_stdout(callback);
+ }
+ else
+ wnuma -= fwrite(wbufa, 1, wnuma, f1out);
+ }
+}
+
+
+
+static void
+uarta_tx(void)
+{
+ while (f1open) {
+ if (ofd1 == 1 && callback) {
+ while (callback->write_stdout(callback, &uarta_sreg, 1) != 1);
+ }
+ else {
+ while (fwrite(&uarta_sreg, 1, 1, f1out) != 1);
+ }
+ }
+ if (uart_stat_reg & UARTA_HRE) {
+ uart_stat_reg |= UARTA_SRE;
+ } else {
+ uarta_sreg = uarta_hreg;
+ uart_stat_reg |= UARTA_HRE;
+ event(uarta_tx, 0, UART_TX_TIME);
+ }
+ set_irq(3);
+}
+
+static void
+uart_rx(caddr_t arg)
+{
+ int32 rsize;
+ char rxd;
+
+
+ rsize = 0;
+ if (f1open)
+ rsize = DO_STDIO_READ (ifd1, &rxd, 1);
+ else
+ rsize = 0;
+ if (rsize > 0) {
+ uarta_data = rxd;
+ if (uart_stat_reg & UARTA_DR) {
+ uart_stat_reg |= UARTA_OR;
+ }
+ uart_stat_reg |= UARTA_DR;
+ set_irq (3);
+ }
+ event(uart_rx, 0, UART_RX_TIME);
+}
+
+static void
+uart_intr(caddr_t arg)
+{
+ /* Check for UART interrupts every 1000 clk. */
+ grlib_read_uart(APBUART_STATUS);
+ flush_uart();
+ event(uart_intr, 0, UART_FLUSH_TIME);
+}
+
+
+static void
+uart_irq_start(void)
+{
+#ifdef FAST_UART
+ event (uart_intr, 0, UART_FLUSH_TIME);
+#else
+#ifndef _WIN32
+ event (uart_rx, 0, UART_RX_TIME);
+#endif
+#endif
+}
+
+/* GPTIMER. */
+
+static void
+gpt_intr(caddr_t arg)
+{
+ int i;
+
+ for (i=0; i<NGPTIMERS; i++) {
+ if (gpt_ctrl[i] & 1) {
+ gpt_counter[i] -= 1;
+ if (gpt_counter[i] == -1) {
+ if (gpt_ctrl[i] & 8)
+ set_irq(GPTIMER_IRQ + i);
+ if (gpt_ctrl[i] & 2)
+ gpt_counter[i] = gpt_reload[i];
+ }
+ }
+ }
+ event(gpt_intr, 0, gpt_scaler + 1);
+ gpt_scaler_start = now();
+}
+
+static void
+gpt_init(void)
+{
+ if (sis_verbose)
+ printf("GPT started (period %d)\n\r", gpt_scaler + 1);
+
+ grlib_apbpp_add(GRLIB_PP_ID(VENDOR_GAISLER, GAISLER_GPTIMER, 0, 8),
+ GRLIB_PP_APBADDR(0x80000300, 0xFFF));
+}
+
+static void
+gpt_reset(void)
+{
+ event(gpt_intr, 0, gpt_scaler + 1);
+ gpt_scaler_start = now();
+}
+
+static void
+gpt_scaler_set(uint32 val)
+{
+ /* Mask for 16-bit scaler. */
+ gpt_scaler = val & 0x0ffff;
+}
+
+static void
+timer_ctrl(uint32 val, int i)
+{
+ if (val & 4) {
+ /* Reload. */
+ gpt_counter[i] = gpt_reload[i];
+ }
+ gpt_ctrl[i] = val & 0xb;
+}
+
+/* Store data in host byte order. MEM points to the beginning of the
+ emulated memory; WADDR contains the index the emulated memory,
+ DATA points to words in host byte order to be stored. SZ contains log(2)
+ of the number of bytes to retrieve, and can be 0 (1 byte), 1 (one half-word),
+ 2 (one word), or 3 (two words); WS should return the number of wait-states. */
+
+static void
+store_bytes (unsigned char *mem, uint32 waddr, uint32 *data, int32 sz, int32 *ws)
+{
+ switch (sz) {
+ case 0:
+#ifdef HOST_LITTLE_ENDIAN
+ waddr ^= 3;
+#endif
+ mem[waddr] = *data & 0x0ff;
+ *ws = 0;
+ break;
+ case 1:
+#ifdef HOST_LITTLE_ENDIAN
+ waddr ^= 2;
+#endif
+ memcpy(&mem[waddr], data, 2);
+ *ws = 0;
+ break;
+ case 2:
+ memcpy(&mem[waddr], data, 4);
+ *ws = 0;
+ break;
+ case 3:
+ memcpy(&mem[waddr], data, 8);
+ *ws = 0;
+ break;
+ }
+}
+
+
+/* Memory emulation. */
+
+static int
+memory_iread (uint32 addr, uint32 *data, int32 *ws)
+{
+ if ((addr >= RAM_START) && (addr < RAM_END)) {
+ memcpy(data, &ramb[addr & RAM_MASK], 4);
+ *ws = 0;
+ return (0);
+ } else if (addr < ROM_END) {
+ memcpy(data, &romb[addr], 4);
+ *ws = 0;
+ return (0);
+ }
+
+ printf("Memory exception at %x (illegal address)\n", addr);
+ *ws = MEM_EX_WS;
+ return (1);
+}
+
+static int
+memory_read(uint32 addr, uint32 *data, int32 sz, int32 *ws)
+{
+ int32 mexc;
+
+ if ((addr >= RAM_START) && (addr < RAM_END)) {
+ memcpy(data, &ramb[addr & RAM_MASK & ~3], 4);
+ *ws = 0;
+ return (0);
+ } else if ((addr >= APBPP_START) && (addr <= APBPP_END)) {
+ *data = grlib_apbpnp_read(addr);
+ if (sis_verbose > 1)
+ printf("APB PP read a: %08x, d: %08x\n",addr, *data);
+ *ws = 4;
+ return (0);
+ } else if ((addr >= APBSTART) && (addr < APBEND)) {
+ mexc = apb_read(addr, data);
+ if (mexc) {
+ *ws = MEM_EX_WS;
+ } else {
+ *ws = 0;
+ }
+ return (mexc);
+ } else if ((addr >= AHBPP_START) && (addr <= AHBPP_END)) {
+ if (sis_verbose > 1)
+ printf("AHB PP read a: %08x, d: %08x\n",addr, *data);
+ *data = grlib_ahbpnp_read(addr);
+ *ws = 4;
+ return (0);
+ } else if (addr < ROM_END) {
+ memcpy(data, &romb[addr & ~3], 4);
+ *ws = 0;
+ return (0);
+ }
+
+ printf("Memory exception at %x (illegal address)\n", addr);
+ *ws = MEM_EX_WS;
+ return (1);
+}
+
+static int
+memory_read_asi(int32 asi, uint32 addr, uint32 *data, int32 sz, int32 *ws)
+{
+ if (asi == 2) {
+ if (addr == 0)
+ *data = cache_ctrl;
+ else
+ *data = 0;
+ return MOK;
+ } else
+ return(memory_read(addr, data, sz, ws));
+}
+
+static int
+memory_write(uint32 addr, uint32 *data, int32 sz, int32 *ws)
+{
+ uint32 byte_addr;
+ uint32 byte_mask;
+ uint32 waddr;
+ uint32 *ram;
+ int32 mexc;
+ int i;
+ int wphit[2];
+
+ if ((addr >= RAM_START) && (addr < RAM_END)) {
+ waddr = addr & RAM_MASK;
+ store_bytes (ramb, waddr, data, sz, ws);
+ return 0;
+
+ } else if ((addr >= APBSTART) && (addr < APBEND)) {
+ if (sz != 2) {
+ *ws = MEM_EX_WS;
+ return 1;
+ }
+ apb_write(addr, *data);
+ *ws = 0;
+ return 0;
+
+ } else if (addr < ROM_END) {
+ *ws = 0;
+ store_bytes (romb, addr, data, sz, ws);
+ return 0;
+ }
+
+ *ws = MEM_EX_WS;
+ return 1;
+}
+
+static int
+memory_write_asi(int32 asi, uint32 addr, uint32 *data, int32 sz, int32 *ws)
+{
+ if (asi == 2) {
+ cache_ctrl = *data & 0x81000f;
+ if (sis_verbose)
+ printf("cache ctrl reg : 0x%08x\n", cache_ctrl);
+ return MOK;
+ } else
+ return(memory_write(addr, data, sz, ws));
+}
+
+static unsigned char *
+get_mem_ptr(uint32 addr, uint32 size)
+{
+ if ((addr + size) < ROM_END) {
+ return (&romb[addr]);
+ } else if ((addr >= RAM_START) && ((addr + size) < RAM_END)) {
+ return (&ramb[addr & RAM_MASK]);
+ }
+
+ return ((char *) -1);
+}
+
+static int
+sis_memory_write(uint32 addr, const unsigned char * data, uint32 length)
+{
+ char *mem;
+
+ if ((mem = get_mem_ptr(addr, length)) == ((char *) -1))
+ return (0);
+
+ memcpy(mem, data, length);
+ return (length);
+}
+
+static int
+sis_memory_read(uint32 addr, char *data, uint32 length)
+{
+ char *mem;
+ int ws;
+
+ if (length == 4) {
+ memory_read(addr, (uint32 *) data, length, &ws);
+ return(4);
+ }
+
+ if ((mem = get_mem_ptr(addr, length)) == ((char *) -1))
+ return (0);
+
+ memcpy(data, mem, length);
+ return (length);
+}
+
+static void
+boot_init (void)
+{
+ /* Generate 1 MHz RTC tick. */
+ apb_write(GPTIMER_SCALER, sregs.freq-1);
+ apb_write(GPTIMER_SCLOAD, sregs.freq-1);
+ apb_write(GPTIMER_TIMER1, -1);
+ apb_write(GPTIMER_RELOAD1, -1);
+ apb_write(GPTIMER_CTRL1, 0x7);
+
+ sregs.wim = 2;
+ sregs.psr = 0xF30010e0;
+ sregs.r[30] = RAM_END;
+ sregs.r[14] = sregs.r[30] - 96*4;
+ cache_ctrl = 0x81000f;
+}
+
+const struct memsys leon3 = {
+ init_sim,
+ reset,
+ error_mode,
+ sim_halt,
+ exit_sim,
+ init_stdio,
+ restore_stdio,
+ memory_iread,
+ memory_read,
+ memory_read_asi,
+ memory_write,
+ memory_write_asi,
+ sis_memory_write,
+ sis_memory_read,
+ boot_init
+};
diff --git a/sim/erc32/sis.c b/sim/erc32/sis.c
index ff8a373..c41539a 100644
--- a/sim/erc32/sis.c
+++ b/sim/erc32/sis.c
@@ -142,7 +142,7 @@ main(argc, argv)
for (i = 0; i < 64; i++)
cmdq[i] = 0;
printf("\n SIS - SPARC instruction simulator %s, copyright Jiri Gaisler 1995\n", sis_version);
- printf(" Bug-reports to jgais@wd.estec.esa.nl\n\n");
+ printf(" Bug-reports to jiri@gaisler.se\n\n");
while (stat < argc) {
if (argv[stat][0] == '-') {
if (strcmp(argv[stat], "-v") == 0) {
@@ -181,6 +181,10 @@ main(argc, argv)
dumbio = 1;
} else if (strcmp(argv[stat], "-nouartrx") == 0) {
nouartrx = 1;
+ } else if (strcmp(argv[stat], "-leon3") == 0) {
+ ms = &leon3;
+ if (freq == 14) freq = 50;
+ cputype = CPU_LEON3;
} else if (strcmp(argv[stat], "-v") == 0) {
sis_verbose += 1;
} else {
@@ -193,13 +197,19 @@ main(argc, argv)
}
stat++;
}
+
+ switch (cputype) {
+ case CPU_LEON3:
+ printf(" LEON3 emulation enabled\n");
+ break;
+ default:
+ printf(" ERC32 emulation enabled\n");
+ }
+
if (nfp)
- printf("FPU disabled\n");
-#ifdef ERA
- if (era)
- printf("ERA ECC emulation enabled\n");
-#endif
+ printf(" FPU disabled\n");
sregs.freq = freq;
+ printf("\n");
INIT_DISASSEMBLE_INFO(dinfo, stdout, (fprintf_ftype) fprintf);
#ifdef HOST_LITTLE_ENDIAN
diff --git a/sim/erc32/sis.h b/sim/erc32/sis.h
index 7f94d55..464f389 100644
--- a/sim/erc32/sis.h
+++ b/sim/erc32/sis.h
@@ -152,6 +152,29 @@ struct irqcell {
int32 arg;
};
+struct memsys {
+ void (*init_sim) (void);
+ void (*reset) (void);
+ void (*error_mode) (uint32 pc);
+ void (*sim_halt) (void);
+ void (*exit_sim) (void);
+ void (*init_stdio) (void);
+ void (*restore_stdio) (void);
+ int (*memory_iread) (uint32 addr, uint32 *data, int32 *ws);
+ int (*memory_read) (uint32 addr, uint32 *data,
+ int32 sz, int32 *ws);
+ int (*memory_read_asi) (int32 asi, uint32 addr, uint32 *data,
+ int32 sz, int32 *ws);
+ int (*memory_write) (uint32 addr, uint32 *data,
+ int32 sz, int32 *ws);
+ int (*memory_write_asi) (int32 asi, uint32 addr, uint32 *data,
+ int32 sz, int32 *ws);
+ int (*sis_memory_write) (uint32 addr,
+ const unsigned char *data, uint32 length);
+ int (*sis_memory_read) (uint32 addr, char *data,
+ uint32 length);
+ void (*boot_init) (void);
+};
#define OK 0
#define TIME_OUT 1
@@ -159,6 +182,8 @@ struct irqcell {
#define ERROR 3
#define CTRL_C 4
+#define CPU_LEON3 3
+
/* Prototypes */
/* erc32.c */
@@ -214,6 +239,7 @@ extern int nouartrx;
extern host_callback *sim_callback;
extern int current_target_byte_order;
extern int dumbio;
+extern int cputype;
/* exec.c */
extern int dispatch_instruction (struct pstate *sregs);
@@ -234,23 +260,7 @@ extern void set_fsr (uint32 fsr);
extern void usage (void);
extern void gen_help (void);
-struct memsys {
- void (*init_sim) (void);
- void (*reset) (void);
- void (*error_mode) (uint32 pc);
- void (*sim_halt) (void);
- void (*exit_sim) (void);
- void (*init_stdio) (void);
- void (*restore_stdio) (void);
- int (*memory_iread) (uint32 addr, uint32 *data, int32 *ws);
- int (*memory_read) (int32 asi, uint32 addr, uint32 *data,
- int32 sz, int32 *ws);
- int (*memory_write) (int32 asi, uint32 addr, uint32 *data,
- int32 sz, int32 *ws);
- int (*sis_memory_write) (uint32 addr,
- const unsigned char *data, uint32 length);
- int (*sis_memory_read) (uint32 addr, char *data,
- uint32 length);
-};
-
extern const struct memsys *ms;
+
+/* leon3.c */
+extern const struct memsys leon3;
--
1.9.1
^ permalink raw reply [flat|nested] 34+ messages in thread
* [PATCH v3 13/14] sim/erc32: Add data watchpoint support
2015-03-01 21:10 [PATCH v3 00/14] Update of the SPARC SIS simulator Jiri Gaisler
` (7 preceding siblings ...)
2015-03-01 21:11 ` [PATCH v3 01/14] sim/erc32: Added -v command line switch for verbose output Jiri Gaisler
@ 2015-03-01 21:11 ` Jiri Gaisler
2015-03-01 21:11 ` [PATCH v3 11/14] sim/erc32: Add support for LEON2 processor emulation Jiri Gaisler
` (4 subsequent siblings)
13 siblings, 0 replies; 34+ messages in thread
From: Jiri Gaisler @ 2015-03-01 21:11 UTC (permalink / raw)
To: gdb-patches; +Cc: Jiri Gaisler
Add watchpoint to all processor targets (erc32, leon2, leon3).
---
sim/erc32/exec.c | 54 ++++++++++++++++++++++++++------
sim/erc32/func.c | 93 ++++++++++++++++++++++++++++++++++++++++++++++++++++++--
sim/erc32/sis.c | 32 ++++++++++++++-----
sim/erc32/sis.h | 23 +++++++++++++-
4 files changed, 181 insertions(+), 21 deletions(-)
diff --git a/sim/erc32/exec.c b/sim/erc32/exec.c
index a2d0e50..62e84bf 100644
--- a/sim/erc32/exec.c
+++ b/sim/erc32/exec.c
@@ -395,6 +395,20 @@ extract_byte_signed (uint32 data, uint32 address)
return(tmp);
}
+/* Decode watchpoint address mask from opcode. Not correct for LDST,
+ SWAP and STFSR but watchpoints will work anyway. */
+
+static unsigned char
+wpmask(uint32 op3)
+{
+ switch (op3 & 3) {
+ case 0: return(3); /* word */
+ case 1: return(0); /* byte */
+ case 2: return(1); /* half-word */
+ case 3: return(7); /* double word */
+ }
+}
+
int
dispatch_instruction (sregs)
struct pstate *sregs;
@@ -698,6 +712,12 @@ dispatch_instruction (sregs)
}
if (eicc & 1) {
sregs->trap = (0x80 | ((rs1 + operand2) & 0x7f));
+ if ((sregs->trap == 129) && (sis_gdb_break) &&
+ (sregs->inst == 0x91d02001))
+ {
+ sregs->trap = WPT_TRAP;
+ sregs->bphit = 1;
+ }
}
break;
@@ -1211,18 +1231,25 @@ dispatch_instruction (sregs)
address = rs1 + operand2;
- if (sregs->psr & PSR_S)
- asi = 11;
- else
- asi = 10;
-
if (op3 & 4) {
sregs->icnt = T_ST; /* Set store instruction count */
+ if (sregs->wpwnum) {
+ if (sregs->wphit = check_wpw(sregs, address, wpmask(op3))) {
+ sregs->trap = WPT_TRAP;
+ break;
+ }
+ }
#ifdef STAT
sregs->nstore++;
#endif
} else {
sregs->icnt = T_LD; /* Set load instruction count */
+ if (sregs->wprnum) {
+ if (sregs->wphit = check_wpr(sregs, address, wpmask(op3))) {
+ sregs->trap = WPT_TRAP;
+ break;
+ }
+ }
#ifdef STAT
sregs->nload++;
#endif
@@ -2133,12 +2160,18 @@ execute_trap(sregs)
{
int32 cwp;
- if (sregs->trap == 256) {
- sregs->pc = 0;
- sregs->npc = 4;
- sregs->trap = 0;
- } else if (sregs->trap == 257) {
+ if (sregs->trap >= 256) {
+ switch (sregs->trap) {
+ case 256:
+ sregs->pc = 0;
+ sregs->npc = 4;
+ sregs->trap = 0;
+ break;
+ case ERROR_TRAP:
return (ERROR);
+ case WPT_TRAP:
+ return (WPT_HIT);
+ }
} else {
if ((sregs->psr & PSR_ET) == 0)
@@ -2231,6 +2264,7 @@ init_regs(sregs)
sregs->fpu_pres = !nfp;
set_fsr(sregs->fsr);
sregs->bphit = 0;
+ sregs->wphit = 0;
sregs->ildreg = 0;
sregs->ildtime = 0;
diff --git a/sim/erc32/func.c b/sim/erc32/func.c
index ed303e4..b89c7f1 100644
--- a/sim/erc32/func.c
+++ b/sim/erc32/func.c
@@ -61,7 +61,9 @@ uint32 last_load_addr = 0;
int nouartrx = 0;
host_callback *sim_callback;
const struct memsys *ms = &erc32sys;
-int cputype = 0; /* 0 = erc32, 3 = leon3 */
+int cputype = 0; /* 0 = erc32, 2 = leon2,3 = leon3 */
+int sis_gdb_break;
+
#ifdef ERRINJ
uint32 errcnt = 0;
@@ -627,7 +629,54 @@ exec_cmd(sregs, cmd)
stat = run_sim(sregs, UINT64_MAX, 0);
daddr = sregs->pc;
ms->sim_halt();
- } else
+ } else if (strncmp(cmd1, "wp", clen) == 0) {
+ for (i = 0; i < sregs->wprnum; i++) {
+ printf(" %d : 0x%08x (read)\n", i + 1, sregs->wprs[i]);
+ }
+ for (i = 0; i < sregs->wpwnum; i++) {
+ printf(" %d : 0x%08x (write)\n", i + 1, sregs->wpws[i]);
+ }
+ } else if (strncmp(cmd1, "+wpr", clen) == 0) {
+ if ((cmd1 = strtok(NULL, " \t\n\r")) != NULL) {
+ sregs->wprs[sregs->wprnum] = VAL(cmd1) & ~0x3;
+ sregs->wprm[sregs->wprnum] = 3;
+ printf("added read watchpoint %d at 0x%08x\n",
+ sregs->wprnum + 1, sregs->wprs[sregs->wprnum]);
+ sregs->wprnum += 1;
+ }
+ } else if (strncmp(cmd1, "-wpr", clen) == 0) {
+ if ((cmd1 = strtok(NULL, " \t\n\r")) != NULL) {
+ i = VAL(cmd1) - 1;
+ if ((i >= 0) && (i < sregs->wprnum)) {
+ printf("deleted read watchpoint %d at 0x%08x\n", i + 1,
+ sregs->wprs[i]);
+ for (; i < sregs->wprnum - 1; i++) {
+ sregs->wprs[i] = sregs->wprs[i + 1];
+ }
+ sregs->wprnum -= 1;
+ }
+ }
+ } else if (strncmp(cmd1, "+wpw", clen) == 0) {
+ if ((cmd1 = strtok(NULL, " \t\n\r")) != NULL) {
+ sregs->wpws[sregs->wpwnum] = VAL(cmd1) & ~0x3;
+ sregs->wpwm[sregs->wpwnum] = 3;
+ printf("added write watchpoint %d at 0x%08x\n",
+ sregs->wpwnum + 1, sregs->wpws[sregs->wpwnum]);
+ sregs->wpwnum += 1;
+ }
+ } else if (strncmp(cmd1, "-wpw", clen) == 0) {
+ if ((cmd1 = strtok(NULL, " \t\n\r")) != NULL) {
+ i = VAL(cmd1) - 1;
+ if ((i >= 0) && (i < sregs->wpwnum)) {
+ printf("deleted write watchpoint %d at 0x%08x\n", i + 1,
+ sregs->wpws[i]);
+ for (; i < sregs->wpwnum - 1; i++) {
+ sregs->wpws[i] = sregs->wpws[i + 1];
+ }
+ sregs->wpwnum -= 1;
+ }
+ }
+ } else
printf("syntax error\n");
}
if (cmdsave2 != NULL)
@@ -717,6 +766,8 @@ init_bpt(sregs)
struct pstate *sregs;
{
sregs->bptnum = 0;
+ sregs->wprnum = 0;
+ sregs->wpwnum = 0;
sregs->histlen = 0;
sregs->histind = 0;
sregs->histbuf = NULL;
@@ -1028,6 +1079,44 @@ check_bpt(sregs)
return (0);
}
+int
+check_wpr(sregs, address, mask)
+ struct pstate *sregs;
+ int32 address;
+ unsigned char mask;
+{
+ int32 i, msk;
+
+ for (i = 0; i < sregs->wprnum; i++) {
+ msk = ~(mask | sregs->wprm[i]);
+ if (((address ^ sregs->wprs[i]) & msk) == 0) {
+ sregs->wpaddress = address;
+ if (sregs->wphit) return (0);
+ return (WPT_HIT);
+ }
+ }
+ return (0);
+}
+
+int
+check_wpw(sregs, address, mask)
+ struct pstate *sregs;
+ int32 address;
+ unsigned char mask;
+{
+ int32 i, msk;
+
+ for (i = 0; i < sregs->wpwnum; i++) {
+ msk = ~(mask | sregs->wpwm[i]);
+ if (((address ^ sregs->wpws[i]) & msk) == 0) {
+ sregs->wpaddress = address;
+ if (sregs->wphit) return (0);
+ return (WPT_HIT);
+ }
+ }
+ return (0);
+}
+
void
reset_all()
{
diff --git a/sim/erc32/sis.c b/sim/erc32/sis.c
index b266361..1981bd2 100644
--- a/sim/erc32/sis.c
+++ b/sim/erc32/sis.c
@@ -75,11 +75,7 @@ run_sim(sregs, icount, dis)
sregs->trap = I_ACC_EXC;
} else {
if (deb) {
- if ((sregs->bphit = check_bpt(sregs)) != 0) {
- ms->restore_stdio();
- return (BPT_HIT);
- }
- if (sregs->histlen) {
+ if (sregs->histlen) {
sregs->histbuf[sregs->histind].addr = sregs->pc;
sregs->histbuf[sregs->histind].time = ebase.simtime;
sregs->histind++;
@@ -90,14 +86,25 @@ run_sim(sregs, icount, dis)
printf(" %8" PRIu64 " ", ebase.simtime);
dis_mem(sregs->pc, 1, &dinfo);
}
+ if ((sregs->bptnum) && (sregs->bphit = check_bpt(sregs)))
+ icount = 0;
+ else {
+ dispatch_instruction(sregs);
+ icount--;
+ }
+ } else {
+ dispatch_instruction(sregs);
+ icount--;
}
- dispatch_instruction(sregs);
- icount--;
}
}
if (sregs->trap) {
irq = 0;
- sregs->err_mode = execute_trap(sregs);
+ if ((sregs->err_mode = execute_trap(sregs)) == WPT_HIT) {
+ sregs->err_mode = 0;
+ sregs->trap = 0;
+ icount = 0;
+ }
if (sregs->err_mode) {
ms->error_mode(sregs->pc);
icount = 0;
@@ -118,6 +125,10 @@ run_sim(sregs, icount, dis)
ctrl_c = 0;
return (CTRL_C);
}
+ if (sregs->bphit)
+ return (BPT_HIT);
+ if (sregs->wphit)
+ return (WPT_HIT);
return (TIME_OUT);
}
@@ -283,6 +294,11 @@ main(argc, argv)
printf(" %8" PRIu64 " ", ebase.simtime);
dis_mem(sregs.pc, 1, &dinfo);
break;
+ case WPT_HIT:
+ printf("watchpoint at 0x%08x reached, pc = 0x%08x\n",
+ sregs.wpaddress, sregs.pc);
+ sregs.wphit = 1;
+ break;
default:
break;
}
diff --git a/sim/erc32/sis.h b/sim/erc32/sis.h
index 6110192..dcce207 100644
--- a/sim/erc32/sis.h
+++ b/sim/erc32/sis.h
@@ -40,8 +40,10 @@
/* Maximum # of floating point queue */
#define FPUQN 1
-/* Maximum # of breakpoints */
+/* Maximum # of breakpoints and watchpoints */
#define BPT_MAX 256
+#define WPR_MAX 256
+#define WPW_MAX 256
struct histype {
unsigned addr;
@@ -101,6 +103,14 @@ struct pstate {
uint32 bptnum;
uint32 bphit;
uint32 bpts[BPT_MAX]; /* Breakpoints */
+ uint32 wprnum;
+ uint32 wphit;
+ uint32 wprs[WPR_MAX]; /* Read Watchpoints */
+ unsigned char wprm[WPR_MAX]; /* Read Watchpoint masks*/
+ uint32 wpwnum;
+ uint32 wpws[WPW_MAX]; /* Write Watchpoints */
+ unsigned char wpwm[WPW_MAX]; /* Write Watchpoint masks */
+ uint32 wpaddress;
uint32 ltime; /* Load interlock time */
uint32 hold; /* IU hold cycles in current inst */
@@ -176,12 +186,19 @@ struct memsys {
void (*boot_init) (void);
};
+/* return values for run_sim */
#define OK 0
#define TIME_OUT 1
#define BPT_HIT 2
#define ERROR 3
#define CTRL_C 4
+#define WPT_HIT 5
+/* special simulator trap types */
+#define ERROR_TRAP 257
+#define WPT_TRAP 258
+
+/* cpu type defines */
#define CPU_LEON2 2
#define CPU_LEON3 3
@@ -232,6 +249,9 @@ extern void advance_time (struct pstate *sregs);
extern uint32 now (void);
extern int wait_for_irq (void);
extern int check_bpt (struct pstate *sregs);
+extern int check_wpr(struct pstate *sregs, int32 address, unsigned char mask);
+extern int check_wpw(struct pstate *sregs, int32 address, unsigned char mask);
+
extern void reset_all (void);
extern void sys_reset (void);
extern void sys_halt (void);
@@ -241,6 +261,7 @@ extern host_callback *sim_callback;
extern int current_target_byte_order;
extern int dumbio;
extern int cputype;
+extern int sis_gdb_break;
/* exec.c */
extern int dispatch_instruction (struct pstate *sregs);
--
1.9.1
^ permalink raw reply [flat|nested] 34+ messages in thread
* [PATCH v3 07/14] sim/erc32: Use gdb callback for UART I/O when linked with gdb.
2015-03-01 21:10 [PATCH v3 00/14] Update of the SPARC SIS simulator Jiri Gaisler
` (9 preceding siblings ...)
2015-03-01 21:11 ` [PATCH v3 11/14] sim/erc32: Add support for LEON2 processor emulation Jiri Gaisler
@ 2015-03-01 21:11 ` Jiri Gaisler
2015-03-02 1:19 ` Mike Frysinger
2015-03-01 21:11 ` [PATCH v3 10/14] sim/erc32: Add support for LEON3 processor emulation Jiri Gaisler
` (2 subsequent siblings)
13 siblings, 1 reply; 34+ messages in thread
From: Jiri Gaisler @ 2015-03-01 21:11 UTC (permalink / raw)
To: gdb-patches; +Cc: Jiri Gaisler
Use the host_callback feature for printing when linked with gdb.
---
sim/erc32/erc32.c | 97 +++++++++++++++++++++++++++++++++++++++++++++---------
sim/erc32/func.c | 2 ++
sim/erc32/interf.c | 5 +--
sim/erc32/sis.c | 2 ++
sim/erc32/sis.h | 4 ++-
5 files changed, 92 insertions(+), 18 deletions(-)
diff --git a/sim/erc32/erc32.c b/sim/erc32/erc32.c
index 4b608d8..c0dc731 100644
--- a/sim/erc32/erc32.c
+++ b/sim/erc32/erc32.c
@@ -22,6 +22,7 @@
/* The control space devices */
#include "config.h"
+#include <errno.h>
#include <sys/types.h>
#include <stdio.h>
#include <string.h>
@@ -39,6 +40,7 @@ extern int rom8,wrp,uben;
extern char uart_dev1[], uart_dev2[];
int dumbio = 0; /* normal, smart, terminal oriented IO by default */
+int tty_setup = 1; /* default setup if not a tty */
/* MEC registers */
#define MEC_START 0x01f80000
@@ -301,12 +303,15 @@ static void store_bytes (unsigned char *mem, uint32 waddr,
extern int ext_irl;
+static host_callback *callback;
+
/* One-time init */
void
init_sim()
{
+ callback = sim_callback;
port_init();
}
@@ -944,10 +949,14 @@ init_stdio()
{
if (dumbio)
return; /* do nothing */
- if (!ifd1)
+ if (ifd1 == 0 && f1open) {
tcsetattr(0, TCSANOW, &ioc1);
- if (!ifd2)
+ tcflush(ifd1, TCIFLUSH);
+ }
+ if (ifd2 == 0 && f1open) {
tcsetattr(0, TCSANOW, &ioc2);
+ tcflush(ifd2, TCIFLUSH);
+ }
}
void
@@ -955,16 +964,18 @@ restore_stdio()
{
if (dumbio)
return; /* do nothing */
- if (!ifd1)
+ if (ifd1 == 0 && f1open && tty_setup)
tcsetattr(0, TCSANOW, &iocold1);
- if (!ifd2)
+ if (ifd2 == 0 && f2open && tty_setup)
tcsetattr(0, TCSANOW, &iocold2);
}
#define DO_STDIO_READ( _fd_, _buf_, _len_ ) \
- ( dumbio \
+ ( dumbio || nouartrx \
? (0) /* no bytes read, no delay */ \
- : read( _fd_, _buf_, _len_ ) )
+ : (_fd_) == 1 && callback ? \
+ callback->read_stdin (callback, _buf_, _len_) : \
+ read( _fd_, _buf_, _len_ ) )
static void
@@ -994,21 +1005,26 @@ port_init()
}
if (f1in) ifd1 = fileno(f1in);
if (ifd1 == 0) {
+ if (callback && !callback->isatty(callback, ifd1)) {
+ tty_setup = 0;
+ }
if (sis_verbose)
printf("serial port A on stdin/stdout\n");
if (!dumbio) {
tcgetattr(ifd1, &ioc1);
+ if (tty_setup) {
iocold1 = ioc1;
ioc1.c_lflag &= ~(ICANON | ECHO);
ioc1.c_cc[VMIN] = 0;
ioc1.c_cc[VTIME] = 0;
}
+ }
f1open = 1;
}
if (f1out) {
ofd1 = fileno(f1out);
- if (!dumbio && ofd1 == 1) setbuf(f1out, NULL);
+ if (!dumbio && tty_setup && ofd1 == 1) setbuf(f1out, NULL);
}
if (uart_dev2[0] != 0)
@@ -1027,17 +1043,19 @@ port_init()
printf("serial port B on stdin/stdout\n");
if (!dumbio) {
tcgetattr(ifd2, &ioc2);
+ if (tty_setup) {
iocold2 = ioc2;
ioc2.c_lflag &= ~(ICANON | ECHO);
ioc2.c_cc[VMIN] = 0;
ioc2.c_cc[VTIME] = 0;
}
+ }
f2open = 1;
}
if (f2out) {
ofd2 = fileno(f2out);
- if (!dumbio && ofd2 == 1) setbuf(f2out, NULL);
+ if (!dumbio && tty_setup && ofd2 == 1) setbuf(f2out, NULL);
}
wnuma = wnumb = 0;
@@ -1066,6 +1084,9 @@ read_uart(addr)
if (f1open) {
anum = DO_STDIO_READ(ifd1, aq, UARTBUF);
}
+ else {
+ anum = 0;
+ }
if (anum > 0) {
aind = 0;
if ((aind + 1) < anum)
@@ -1098,6 +1119,9 @@ read_uart(addr)
if (f2open) {
bnum = DO_STDIO_READ(ifd2, bq, UARTBUF);
}
+ else {
+ bnum = 0;
+ }
if (bnum > 0) {
bind = 0;
if ((bind + 1) < bnum)
@@ -1130,6 +1154,9 @@ read_uart(addr)
if (f1open) {
anum = DO_STDIO_READ(ifd1, aq, UARTBUF);
}
+ else {
+ anum = 0;
+ }
if (anum > 0) {
Ucontrol |= 0x00000001;
aind = 0;
@@ -1142,6 +1169,9 @@ read_uart(addr)
if (f2open) {
bnum = DO_STDIO_READ(ifd2, bq, UARTBUF);
}
+ else {
+ bnum = 0;
+ }
if (bnum > 0) {
Ucontrol |= 0x00010000;
bind = 0;
@@ -1182,8 +1212,12 @@ write_uart(addr, data)
if (wnuma < UARTBUF)
wbufa[wnuma++] = c;
else {
- while (wnuma)
+ while (wnuma) {
+ if (ofd1 == 1 && callback)
+ wnuma -= callback->write_stdout(callback, wbufa, wnuma);
+ else
wnuma -= fwrite(wbufa, 1, wnuma, f1out);
+ }
wbufa[wnuma++] = c;
}
}
@@ -1206,8 +1240,12 @@ write_uart(addr, data)
if (wnumb < UARTBUF)
wbufb[wnumb++] = c;
else {
- while (wnumb)
+ while (wnumb) {
+ if (ofd1 == 1 && callback)
+ wnumb -= callback->write_stdout(callback, wbufb, wnumb);
+ else
wnumb -= fwrite(wbufb, 1, wnumb, f2out);
+ }
wbufb[wnumb++] = c;
}
}
@@ -1245,19 +1283,37 @@ write_uart(addr, data)
static void
flush_uart()
{
- while (wnuma && f1open)
+ while (wnuma && f1open) {
+ if (ofd1 == 1 && callback) {
+ wnuma -= callback->write_stdout(callback, wbufa, wnuma);
+ callback->flush_stdout(callback);
+ }
+ else
wnuma -= fwrite(wbufa, 1, wnuma, f1out);
- while (wnumb && f2open)
+ }
+ while (wnumb && f2open) {
+ if (ofd2 == 1 && callback) {
+ wnuma -= callback->write_stdout(callback, wbufb, wnuma);
+ callback->flush_stdout(callback);
+ }
+ else
wnumb -= fwrite(wbufb, 1, wnumb, f2out);
}
+}
static void
uarta_tx()
{
-
- while (f1open && fwrite(&uarta_sreg, 1, 1, f1out) != 1);
+ while (f1open) {
+ if (ofd1 == 1 && callback) {
+ while (callback->write_stdout(callback, &uarta_sreg, 1) != 1);
+ }
+ else {
+ while (fwrite(&uarta_sreg, 1, 1, f1out) != 1);
+ }
+ }
if (uart_stat_reg & UARTA_HRE) {
uart_stat_reg |= UARTA_SRE;
} else {
@@ -1271,7 +1327,14 @@ uarta_tx()
static void
uartb_tx()
{
- while (f2open && fwrite(&uartb_sreg, 1, 1, f2out) != 1);
+ while (f2open) {
+ if (ofd2 == 1 && callback) {
+ while (callback->write_stdout(callback, &uarta_sreg, 1) != 1);
+ }
+ else {
+ while (fwrite(&uartb_sreg, 1, 1, f2out) != 1);
+ }
+ }
if (uart_stat_reg & UARTB_HRE) {
uart_stat_reg |= UARTB_SRE;
} else {
@@ -1293,6 +1356,8 @@ uart_rx(arg)
rsize = 0;
if (f1open)
rsize = DO_STDIO_READ(ifd1, &rxd, 1);
+ else
+ rsize = 0;
if (rsize > 0) {
uarta_data = UART_DR | rxd;
if (uart_stat_reg & UARTA_HRE)
@@ -1309,6 +1374,8 @@ uart_rx(arg)
rsize = 0;
if (f2open)
rsize = DO_STDIO_READ(ifd2, &rxd, 1);
+ else
+ rsize = 0;
if (rsize) {
uartb_data = UART_DR | rxd;
if (uart_stat_reg & UARTB_HRE)
diff --git a/sim/erc32/func.c b/sim/erc32/func.c
index 82c0deb..dd8bc52 100644
--- a/sim/erc32/func.c
+++ b/sim/erc32/func.c
@@ -52,6 +52,8 @@ char uart_dev1[128] = "";
char uart_dev2[128] = "";
extern int ext_irl;
uint32 last_load_addr = 0;
+int nouartrx = 0;
+host_callback *sim_callback;
#ifdef ERRINJ
uint32 errcnt = 0;
diff --git a/sim/erc32/interf.c b/sim/erc32/interf.c
index dd7283e..497b3b3 100644
--- a/sim/erc32/interf.c
+++ b/sim/erc32/interf.c
@@ -61,8 +61,6 @@ extern char uart_dev1[], uart_dev2[];
int sis_gdb_break = 1;
-host_callback *sim_callback;
-
int
run_sim(sregs, icount, dis)
struct pstate *sregs;
@@ -210,6 +208,9 @@ sim_open (kind, callback, abfd, argv)
if (strcmp(argv[stat], "-dumbio") == 0) {
dumbio = 1;
} else
+ if (strcmp(argv[stat], "-nouartrx") == 0) {
+ nouartrx = 1;
+ } else
if (strcmp(argv[stat], "-wrp") == 0) {
wrp = 1;
} else
diff --git a/sim/erc32/sis.c b/sim/erc32/sis.c
index b066a56..2623fc5 100644
--- a/sim/erc32/sis.c
+++ b/sim/erc32/sis.c
@@ -202,6 +202,8 @@ main(argc, argv)
#endif
} else if (strcmp(argv[stat], "-dumbio") == 0) {
dumbio = 1;
+ } else if (strcmp(argv[stat], "-nouartrx") == 0) {
+ nouartrx = 1;
} else if (strcmp(argv[stat], "-v") == 0) {
sis_verbose += 1;
} else {
diff --git a/sim/erc32/sis.h b/sim/erc32/sis.h
index 742d2d8..188825c 100644
--- a/sim/erc32/sis.h
+++ b/sim/erc32/sis.h
@@ -162,7 +162,7 @@ struct irqcell {
/* Prototypes */
/* erc32.c */
-extern void init_sim (void);
+extern void init_sim ();
extern void reset (void);
extern void error_mode (uint32 pc);
extern void sim_halt (void);
@@ -203,6 +203,8 @@ extern void reset_all (void);
extern void sys_reset (void);
extern void sys_halt (void);
extern double get_time (void);
+extern int nouartrx;
+extern host_callback *sim_callback;
/* exec.c */
extern int dispatch_instruction (struct pstate *sregs);
--
1.9.1
^ permalink raw reply [flat|nested] 34+ messages in thread
* [PATCH v3 12/14] sim/erc32: Updated documentation.
2015-03-01 21:10 [PATCH v3 00/14] Update of the SPARC SIS simulator Jiri Gaisler
` (4 preceding siblings ...)
2015-03-01 21:11 ` [PATCH v3 09/14] sim/erc32: Move local extern declarations into sis.h Jiri Gaisler
@ 2015-03-01 21:11 ` Jiri Gaisler
2015-03-01 21:11 ` [PATCH v3 08/14] sim/erc32: Access memory subsystem through struct memsys Jiri Gaisler
` (7 subsequent siblings)
13 siblings, 0 replies; 34+ messages in thread
From: Jiri Gaisler @ 2015-03-01 21:11 UTC (permalink / raw)
To: gdb-patches; +Cc: Jiri Gaisler
Cleaned up documentation. Obsolote README files were removed,
main documentation on operation is now in READMEM.sis.
---
sim/erc32/NEWS | 108 ----------------------------
sim/erc32/README.gdb | 67 -----------------
sim/erc32/README.leon2 | 53 ++++++++++++++
sim/erc32/README.sis | 191 ++++++++++++++++---------------------------------
sim/erc32/startsim | 4 --
5 files changed, 116 insertions(+), 307 deletions(-)
delete mode 100644 sim/erc32/NEWS
delete mode 100644 sim/erc32/README.gdb
create mode 100644 sim/erc32/README.leon2
delete mode 100644 sim/erc32/startsim
diff --git a/sim/erc32/NEWS b/sim/erc32/NEWS
deleted file mode 100644
index dd24b7b..0000000
--- a/sim/erc32/NEWS
+++ /dev/null
@@ -1,108 +0,0 @@
-
-version 2.0 05-02-96
---------------------
-
-* Switched to bfd library. Any supported format (elf, coff, ...) can be used.
-* The UART devices can be set through -uart1 and -uart2 switches.
-* Switched to GNU readline.
-* Added -c option to run batch files at startup
-* 'reg' command can show different register windows (eg 'reg w3').
-* Use 'help' for online help on simulator commands
-
-version 1.8.1 20-01-96
---------------------
-
-* added -mevrev0 switch to simulate MEC rev.0 bugs in timer and uart
-
-* added -iurev0 switch to simulate IU rev.0 jmpl/restore bug
-
-* Added sis command 'batch' to run batch files
-
-
-version 1.8 30-10-95
---------------------
-
-* Added s-record support. Use the '-s' switch with sis or the 'load' command.
-
-* IU load dependencies are now modelled
-
-version 1.7 30-10-95
---------------------
-
-* Power-down mode implemented in erc32.c.
-
-* Performance display shows the ratio between simulator-time and real-time.
-
-
-version 1.6.2 25-10-95
---------------------
-
-* The UARTs can now be run at a given speed (simulator time) to better
- simulate the behaviour of interrupt routines. The "true mode" is
- selected through a compile switch in the makefile.
-
-
-version 1.6 28-09-95
---------------------
-
-* Major reorganisation of the code. mec.c and mem.c merged into erc32.c.
-
-* The load command does NOT longer load the initialised data at an address
- defined by .bdata. This is done in srt0.s using _environ.
-
-* Additional MEC functionallity added - software reset, memory access
- protection and waitstate configuration register.
-
-* interf.c - a GDB interface added
-
-* -v switch (verbose) added
-
-version 1.5 14-09-95
---------------------
-
-* Added a instruction trace buffer, enabled through the 'hist' command.
-
-* Added a 'perf' command to display statistics such as instruction mix,
- CPI, FPU holds etc.
-
-* Added -nfp switch to disable FPU.
-
-* Added -freq switch to set simulated frequency.
-
-version 1.4 22-08-95
---------------------
-
-* A -g is provided for those who have problems with GNU readline().
-
-version 1.3 26-07-95
---------------------
-
-* No major news, just a bug fix release ...
-
-
-version 1.2 13-07-95
---------------------
-
-* Added setting of IU registers through the 'reg' command. See README.
-
-* The GNU readline() function is used for command input. However, a
-ctrl-D still kills the simulator ...
-
-
-version 1.1 07-07-95
---------------------
-
-
-* Added a 'go' command
-
-* Added cycle counting for interrupt overhead.
-
-* Function 'get_mem_ptr' takes one more parameter to avoid segmentation
- faults if a.out files are loaded outside the simulated memory. See README.
-
-* Added user-defined function sim_stop().
-
-* Added a reset command. See README.
-
-* Implemented buffered output for MEC uarts to improve output speed.
-
diff --git a/sim/erc32/README.gdb b/sim/erc32/README.gdb
deleted file mode 100644
index 619fcb3..0000000
--- a/sim/erc32/README.gdb
+++ /dev/null
@@ -1,67 +0,0 @@
-How to use SIS with GDB
------------------------
-
-1. Building GDB with SIS
-
-To build GDB with the SIS/ERC32 simulator, configure with option
-'--target sparc-erc32-aout' and build as usual.
-
-2. Attaching the simulator
-
-To attach GDB to the simulator, use:
-
-target sim [options] [files]
-
-The following options are supported:
-
- -nfp Disable FPU. FPops will cause an FPU disabled trap.
-
- -freq <f> Set the simulated "system clock" to <f> MHz.
-
- -v Verbose mode.
-
- -nogdb Disable GDB breakpoint handling (see below)
-
-The listed [files] are expected to be in aout format and will be
-loaded in the simulator memory prior. This could be used to load
-a boot block at address 0x0 if the application is linked to run
-from RAM (0x2000000).
-
-To start debugging a program type 'load <program>' and debug as
-usual.
-
-The native simulator commands can be reached using the GDB 'sim'
-command:
-
-sim <sis_command>
-
-Direct simulator commands during a GDB session must be issued
-with care not to disturb GDB's operation ...
-
-For info on supported ERC32 functionality, see README.sis.
-
-
-3. Loading aout files
-
-The GDB load command loads an aout file into the simulator
-memory with the data section starting directly after the text
-section regardless of wich start address was specified for the data
-at link time! This means that your applications either has to include
-a routine that initialise the data segment at the proper address or
-link with the data placed directly after the text section.
-
-A copying routine is fairly simple, just copy all data between
-_etext and _data to a memory loaction starting at _environ. This
-should be done at the same time as the bss is cleared (in srt0.s).
-
-
-4. GDB breakpoint handling
-
-GDB inserts breakpoint in the form of the 'ta 1' instruction. The
-GDB-integrated simulator will therefore recognize the breakpoint
-instruction and return control to GDB. If the application uses
-'ta 1', the breakpoint detection can be disabled with the -nogdb
-switch. In this case however, GDB breakpoints will not work.
-
-
-Report problems to Jiri Gaisler ESA/ESTEC (jgais@wd.estec.esa.nl)
diff --git a/sim/erc32/README.leon2 b/sim/erc32/README.leon2
new file mode 100644
index 0000000..3820eca
--- /dev/null
+++ b/sim/erc32/README.leon2
@@ -0,0 +1,53 @@
+
+1. LEON2 emulation
+
+The file 'leon2.c' contains a model of simple LEON2 sub-system. It
+contains 16 Mbyte ROM and 16 Mbyte RAM. Standard peripherals
+such as interrupt controller, UART and timer are provided.
+The model can execute leon2 binaries that do not require an
+MMU.
+
+To start sis in Leon2 mode, add the -leon2 switch. In gdb,
+use 'target sim -leon2' .
+
+1.1 UART
+
+One LEON2 UART is emaulted, and is located at address 0x80000070.
+The following registers are implemeted:
+
+- UART RX and TX register (0x80000070)
+- UART status register (0x80000074)
+
+The UART generates interrupt 3.
+
+1.2 Timer unit
+
+The LEON2 timer unit is emulated and located at address 0x80000040.
+It is configured with two timers and separate interrupts (8 and 9).
+The scaler is configured to 16 bits, while the counters are 32 bits.
+
+1.3 Interrupt controller
+
+The interrupt controller is implemented as described in the
+LEON2 IP manual, with the exception of the interrupt level register.
+Secondary interrupts are not supported. The registers are located
+at address 0x80000090.
+
+1.5 Memory interface
+
+The following memory areas are valid for the Leon3 simulator:
+
+0x00000000 - 0x01000000 ROM (16 Mbyte, loaded at start-up)
+0x40000000 - 0x41000000 RAM (16 Mbyte, loaded at start-up)
+0x80000000 - 0x81000000 APB bus, including plug&play
+0xFFFFF000 - 0xFFFFFFFF AHB plug&play area
+
+Access to non-existing memory will result in a memory exception trap.
+
+1.8 Power-down mode
+
+The Leon2 power-down register (0x80000018) is supported. When power-down is
+entered, time is skipped forward until the next event in the event queue.
+However, if the simulator event queue is empty, power-down mode is not
+entered since no interrupt would be generated to exit from the mode. A
+Ctrl-C in the simulator window will exit the power-down mode.
diff --git a/sim/erc32/README.sis b/sim/erc32/README.sis
index aadba3c..1a3a8e0 100644
--- a/sim/erc32/README.sis
+++ b/sim/erc32/README.sis
@@ -13,11 +13,12 @@ and peripherals.
The simulator is started as follows:
-sis [-leon3] [-uart1 uart_device1] [-uart2 uart_device2]
- [-nfp] [-freq frequency] [-c batch_file] [files]
+sis [-leon2] [-leon3] [-uart1 uart_device1] [-uart2 uart_device2]
+ [-nfp] [-freq frequency] [-c batch_file] [-v] [files]
-By default, SIS emulates an ERC32 system. The -leon3 switch
-enables emulation of a LEON3 SOC system.
+By default, SIS emulates an ERC32 system. The -leon2 switch enables
+LEON2 emulation, while the -leon3 switch enables emulation of a
+LEON3 SOC system.
The emulated console uart is connected to stdin/stdout. The -uart[1,2]
switch can be used to connect the uarts to other devices.
@@ -143,8 +144,50 @@ Typing a 'Ctrl-C' will interrupt a running simulator.
Short forms of the commands are allowed, e.g 'c' 'co' or 'con' are all
interpreted as 'cont'.
+2. Using SIS with GDB
-3. Simulator core
+To attach GDB to the simulator, use:
+
+target sim [options]
+
+The following options are supported:
+
+ -leon2 Emulate a LEON2 system
+
+ -leon3 Emulate a LEON3 system
+
+ -nfp Disable FPU. FPops will cause an FPU disabled trap.
+
+ -freq <f> Set the simulated "system clock" to <f> MHz.
+
+ -v Verbose mode.
+
+ -nogdb Disable GDB breakpoint handling (see below)
+
+To start debugging a program type 'load <program>' and debug as
+usual.
+
+The native simulator commands can be reached using the GDB 'sim'
+command:
+
+sim <sis_command>
+
+Direct simulator commands during a GDB session must be issued
+with care not to disturb GDB's operation ...
+
+A program can be restarted in GDB by first issuing the load command,
+followed by run.
+
+3. GDB breakpoint handling
+
+GDB inserts breakpoint in the form of the 'ta 1' instruction. The
+GDB-integrated simulator will therefore recognize the breakpoint
+instruction and return control to GDB. If the application uses
+'ta 1', the breakpoint detection can be disabled with the -nogdb
+switch. In this case however, GDB breakpoints will not work.
+
+
+4. Simulator core
In ERC32 mode, SIS emulates the behavior of the 90C601E and 90C602E
sparc IU and FPU from Matra MHS. These are roughly equivalent to the
@@ -153,129 +196,10 @@ maintained and incremented according the IU and FPU instruction timing.
The parallel execution between the IU and FPU is modelled, as well as
stalls due to operand dependencies (FPU).
-In Leon3 mode, the core emulates the Leon3 SPARC V8 core from
+In Leon2/3 mode, the core emulates the Leon2/3 SPARC V8 core from
Gaisler Research. All SPARC V8 instructions are supported but
emulation is not fully cycle-true as the cache is not emulated.
-The core interacts with the user-defined memory modules through
-a number of functions. The memory module must provide the following
-functions:
-
-int memory_read(asi,addr,data,ws)
-int asi;
-unsigned int addr;
-unsigned int *data;
-int *ws;
-
-int memory_write(asi,addr,data,sz,ws)
-int asi;
-unsigned int addr;
-unsigned int *data;
-int sz;
-int *ws;
-
-int sis_memory_read(addr, data, length)
-unsigned int addr;
-char *data;
-unsigned int length;
-
-int sis_memory_write(addr, data, length)
-unsigned int addr;
-char *data;
-unsigned int length;
-
-int init_sim()
-
-int reset()
-
-int error_mode(pc)
-unsigned int pc;
-
-memory_read() is used by the simulator to fetch instructions and
-operands. The address space identifier (asi) and address is passed as
-parameters. The read data should be assigned to the data pointer
-(*data) and the number of waitstate to *ws. 'memory_read' should return
-0 on success and 1 on failure. A failure will cause a data or
-instruction fetch trap. memory_read() always reads one 32-bit word.
-
-sis_memory_read() is used by the simulator to display and disassemble
-memory contants. The function should copy 'length' bytes of the simulated
-memory starting at 'addr' to '*data'.
-The sis_memory_read() should return 1 on success and 0 on failure.
-Failure should only be indicated if access to unimplemented memory is attempted.
-
-memory_write() is used to write to memory. In addition to the asi
-and address parameters, the size of the written data is given by 'sz'.
-The pointer *data points to the data to be written. The 'sz' is coded
-as follows:
-
- sz access type
- 0 byte
- 1 halfword
- 2 word
- 3 double-word
-
-If a double word is written, the most significant word is in data[0] and
-the least significant in data[1].
-
-sis_memory_write() is used by the simulator during loading of programs.
-The function should copy 'length' bytes from *data to the simulated
-memory starting at 'addr'. sis_memory_write() should return 1 on
-success and 0 on failure. Failure should only be indicated if access
-to unimplemented memory is attempted. See erc32.c for more details
-on how to define the memory emulation functions.
-
-The 'init_sim' is called once when the simulator is started. This function
-should be used to perform initialisations of user defined memory or
-peripherals that only have to be done once, such as opening files etc.
-
-The 'reset' is called every time the simulator is reset, i.e. when a
-'run' command is given. This function should be used to simulate a power
-on reset of memory and peripherals.
-
-error_mode() is called by the simulator when the IU goes into error mode,
-typically if a trap is caused when traps are disabled. The memory module
-can then take actions, such as issue a reset.
-
-sys_reset() can be called by the memory module to reset the simulator. A
-reset will empty the event queue and perform a power-on reset.
-
-4. Events and interrupts
-
-The simulator supports an event queue and the generation of processor
-interrupts. The following functions are available to the user-defined
-memory module:
-
-event(cfunc,arg,delta)
-void (*cfunc)();
-int arg;
-unsigned int delta;
-
-set_int(level,callback,arg)
-int level;
-void (*callback)();
-int arg;
-
-clear_int(level)
-int level;
-
-sim_stop()
-
-The 'event' functions will schedule the execution of the function 'cfunc'
-at time 'now + delta' clock cycles. The parameter 'arg' is passed as a
-parameter to 'cfunc'.
-
-The 'set_int' function set the processor interrupt 'level'. When the interrupt
-is taken, the function 'callback' is called with the argument 'arg'. This
-will also clear the interrupt. An interrupt can be cleared before it is
-taken by calling 'clear_int' with the appropriate interrupt level.
-
-The sim_stop function is called each time the simulator stops execution.
-It can be used to flush buffered devices to get a clean state during
-single stepping etc.
-
-See 'erc32.c' for examples on how to use events and interrupts.
-
5. Memory module
The ERC32 memory module (erc32.c) emulates the functions of memory and
@@ -292,6 +216,19 @@ the MEC asic developed for the 90C601/2. It includes the following functions:
See README.erc32 on how the MEC functions are emulated.
+The Leon2 memory module (leon2.c) emulates on-chip peripherals and
+external memory for a simple Leon2 system. The modules includes the
+following functions:
+
+* AHB and APB buses
+* One UART
+* Interrupt controller
+* Timer unit with two timers
+* PROM/SRAM memory controller
+* 16 Mbyte PROM, 16 Mbyte SRAM
+
+See README.leon2 for further details on Leon2 emulation.
+
The Leon3 memory module (leon3.c) emulates on-chip peripherals and
external memory for a simple Leon3 system. The modules includes the
following functions:
@@ -305,9 +242,7 @@ following functions:
See README.leon3 for further details on Leon3 emulation.
-6. Compile and linking programs
-
-7. IU and FPU instruction timing.
+6. IU and FPU instruction timing.
The simulator provides cycle true simulation for ERC32. The following table
shows the emulated instruction timing for 90C601E & 90C602E:
diff --git a/sim/erc32/startsim b/sim/erc32/startsim
deleted file mode 100644
index 1b9b41c..0000000
--- a/sim/erc32/startsim
+++ /dev/null
@@ -1,4 +0,0 @@
-#
-xterm -e sis $* &
-xterm -e tip /dev/ttypc &
-
--
1.9.1
^ permalink raw reply [flat|nested] 34+ messages in thread
* Re: [PATCH v3 01/14] sim/erc32: Added -v command line switch for verbose output
2015-03-01 21:11 ` [PATCH v3 01/14] sim/erc32: Added -v command line switch for verbose output Jiri Gaisler
@ 2015-03-02 0:59 ` Mike Frysinger
0 siblings, 0 replies; 34+ messages in thread
From: Mike Frysinger @ 2015-03-02 0:59 UTC (permalink / raw)
To: Jiri Gaisler; +Cc: gdb-patches
[-- Attachment #1: Type: text/plain, Size: 418 bytes --]
On 01 Mar 2015 22:10, Jiri Gaisler wrote:
> * help.c (usage) : update usage help print-out
>
> * sis.c (run_sim) : increase debug level with -v. Also print
> simulation time in long long format.
> ---
> sim/erc32/func.c | 5 +++--
> sim/erc32/help.c | 2 +-
> sim/erc32/sis.c | 9 ++++++---
> sim/erc32/sis.h | 8 +++-----
looks like the ChangeLog needs updating. it doesn't match the diff.
-mike
[-- Attachment #2: Digital signature --]
[-- Type: application/pgp-signature, Size: 819 bytes --]
^ permalink raw reply [flat|nested] 34+ messages in thread
* Re: [PATCH v3 02/14] sim/erc32: Removed type mismatch compiler warnings
2015-03-01 21:10 ` [PATCH v3 02/14] sim/erc32: Removed type mismatch compiler warnings Jiri Gaisler
@ 2015-03-02 1:04 ` Mike Frysinger
0 siblings, 0 replies; 34+ messages in thread
From: Mike Frysinger @ 2015-03-02 1:04 UTC (permalink / raw)
To: Jiri Gaisler; +Cc: gdb-patches
[-- Attachment #1: Type: text/plain, Size: 1010 bytes --]
On 01 Mar 2015 22:10, Jiri Gaisler wrote:
> while (!feof(fp)) {
> - lbuf[0] = 0;
> - fgets(lbuf, 1023, fp);
> - if ((strlen(lbuf) > 0) && (lbuf[strlen(lbuf) - 1] == '\n'))
> + if (getline(&lbuf, &len, fp) == -1)
> + break;
do you still need the feof check ? getline will do that for you:
while (getline(&lbuf, &len, fp) != -1)
> + if ((strlen(lbuf) > 0) && (lbuf[strlen(lbuf) - 1] == '\n')) {
> lbuf[strlen(lbuf) - 1] = 0;
is gcc smart enough to cache that strlen call ? might be better to do it
yourself:
size_t slen = strlen(lbuf);
if (slen && lbuf[slen - 1] == '\n')
lbuf[slen - 1] = 0;
> @@ -383,7 +387,7 @@ exec_cmd(sregs, cmd)
> {
> char *cmd1, *cmd2;
> int32 stat;
> - uint32 len, i, clen, j;
> + uint32 len, i, clen, j, tmp;
> static uint32 daddr = 0;
> char *cmdsave;
>
do you still need |tmp| now that you changed how the system() warning is
silenced ?
-mike
[-- Attachment #2: Digital signature --]
[-- Type: application/pgp-signature, Size: 819 bytes --]
^ permalink raw reply [flat|nested] 34+ messages in thread
* Re: [PATCH v3 03/14] sim/erc32: Switched emulated memory to host endian order.
2015-03-01 21:10 ` [PATCH v3 03/14] sim/erc32: Switched emulated memory to host endian order Jiri Gaisler
@ 2015-03-02 1:13 ` Mike Frysinger
2015-03-12 21:25 ` Jiri Gaisler
0 siblings, 1 reply; 34+ messages in thread
From: Mike Frysinger @ 2015-03-02 1:13 UTC (permalink / raw)
To: Jiri Gaisler; +Cc: gdb-patches
[-- Attachment #1: Type: text/plain, Size: 3190 bytes --]
On 01 Mar 2015 22:10, Jiri Gaisler wrote:
> --- a/sim/erc32/erc32.c
> +++ b/sim/erc32/erc32.c
>
> if ((addr >= mem_ramstart) && (addr < (mem_ramstart + mem_ramsz))) {
> - fetch_bytes (asi, &ramb[addr & mem_rammask], data, sz);
> + *data = *((uint32 *) & (ramb[addr & mem_rammask & ~3]));
pretty sure this too should be a memcpy. also applies to the other updates to
this func in this patch.
> --- a/sim/erc32/exec.c
> +++ b/sim/erc32/exec.c
>
> +static int
> +extract_short (uint32 data, uint32 address)
> +{
> + return((data >> ((2 - (address & 2)) * 8)) & 0xffff);
needs to be a space after the return
> +static int
> +extract_short_signed (uint32 data, uint32 address)
> +{
> + uint32 tmp;
> + tmp = ((data >> ((2 - (address & 2)) * 8)) & 0xffff);
you could merge these two statements if you wanted
> + if (tmp & 0x8000) tmp |= 0xffff0000;
uncuddle this
> + return(tmp);
drop the paren
> +static int
> +extract_byte (uint32 data, uint32 address)
> +{
> + return((data >> ((3 - (address & 3)) * 8)) & 0xff);
space after the return
> +static int
> +extract_byte_signed (uint32 data, uint32 address)
> +{
> + uint32 tmp;
> + tmp = ((data >> ((3 - (address & 3)) * 8)) & 0xff);
merge if you want
> + if (tmp & 0x80) tmp |= 0xffffff00;
uncuddle
> + return(tmp);
drop paren
> --- a/sim/erc32/func.c
> +++ b/sim/erc32/func.c
>
> + if (isprint(p[j^end]))
> + putchar(p[j^end]);
spaces around that ^ operator
> @@ -841,10 +850,11 @@ dis_mem(addr, len, info)
> {
> uint32 i;
> unsigned char data[4];
> + uint32 *wdata = (uint32 *) data;
use a union ? :)
> while (section_size > 0) {
> - char buffer[1024];
> int count;
> + char buffer[1024];
> + uint32 *wbuffer = (uint32 *) buffer;
use a union
> +#ifdef HOST_LITTLE_ENDIAN
> + for (i = 0; i < (count / 4); i++) wbuffer[i] = ntohl(wbuffer[i]); // endian swap
> +#endif
sim-endian.h already provides a lot of helper funcs that i'm pretty sure you
can use here.
> @@ -356,7 +360,19 @@ sim_write(sd, mem, buf, length)
> const unsigned char *buf;
> int length;
> {
> +#ifdef HOST_LITTLE_ENDIAN
> + int *ibufp = (int *) buf;
> + int ibuf[8192];
> + int i, len;
> +
> + if (length >= 4)
> + for (i = 0; i < length; i += 4) {
> + ibuf[i] = ntohl(ibufp[i]);
> + }
> + return (sis_memory_write(mem, (char *) ibuf, length));
> +#else
> return (sis_memory_write(mem, buf, length));
> +#endif
same here
> @@ -366,7 +382,20 @@ sim_read(sd, mem, buf, length)
> unsigned char *buf;
> int length;
> {
> +#ifdef HOST_LITTLE_ENDIAN
> + int *ibuf = (int *) buf;
> + int i, len;
> +
> + len = sis_memory_read(mem, buf, length);
> + if (length >= 4)
> + for (i = 0; i < length; i += 4) {
> + *ibuf = htonl(*ibuf);
> + ibuf++;
> + }
> + return (len);
> +#else
> return (sis_memory_read(mem, buf, length));
> +#endif
and here
-mike
[-- Attachment #2: Digital signature --]
[-- Type: application/pgp-signature, Size: 819 bytes --]
^ permalink raw reply [flat|nested] 34+ messages in thread
* Re: [PATCH v3 05/14] sim/erc32: Use memory_iread() function for instruction fetching.
2015-03-01 21:10 ` [PATCH v3 05/14] sim/erc32: Use memory_iread() function for instruction fetching Jiri Gaisler
@ 2015-03-02 1:15 ` Mike Frysinger
[not found] ` <55020795.4080009@gaisler.se>
0 siblings, 1 reply; 34+ messages in thread
From: Mike Frysinger @ 2015-03-02 1:15 UTC (permalink / raw)
To: Jiri Gaisler; +Cc: gdb-patches
[-- Attachment #1: Type: text/plain, Size: 437 bytes --]
On 01 Mar 2015 22:10, Jiri Gaisler wrote:
> --- a/sim/erc32/erc32.c
> +++ b/sim/erc32/erc32.c
>
> + return (0);
drop the paren
> + return (0);
here too
> + printf("Memory exception at %x (illegal address)\n", addr);
space after the printf
should this be writing to stderr ?
> --- a/sim/erc32/interf.c
> +++ b/sim/erc32/interf.c
>
> + mexc = memory_iread(sregs->pc, &sregs->inst, &sregs->hold);
space before the (
-mike
[-- Attachment #2: Digital signature --]
[-- Type: application/pgp-signature, Size: 819 bytes --]
^ permalink raw reply [flat|nested] 34+ messages in thread
* Re: [PATCH v3 06/14] sim/erc32: Fix a few compiler warnings
2015-03-01 21:10 ` [PATCH v3 06/14] sim/erc32: Fix a few compiler warnings Jiri Gaisler
@ 2015-03-02 1:18 ` Mike Frysinger
0 siblings, 0 replies; 34+ messages in thread
From: Mike Frysinger @ 2015-03-02 1:18 UTC (permalink / raw)
To: Jiri Gaisler; +Cc: gdb-patches
[-- Attachment #1: Type: text/plain, Size: 351 bytes --]
On 01 Mar 2015 22:10, Jiri Gaisler wrote:
> --- a/sim/erc32/sis.h
> +++ b/sim/erc32/sis.h
>
> extern void reset_all (void);
> extern void sys_reset (void);
> extern void sys_halt (void);
> -extern int bfd_load (char *fname);
> extern double get_time (void);
this patch fixes up exec_cmd and that looks fine. this one change is
unrelated ?
-mike
[-- Attachment #2: Digital signature --]
[-- Type: application/pgp-signature, Size: 819 bytes --]
^ permalink raw reply [flat|nested] 34+ messages in thread
* Re: [PATCH v3 07/14] sim/erc32: Use gdb callback for UART I/O when linked with gdb.
2015-03-01 21:11 ` [PATCH v3 07/14] sim/erc32: Use gdb callback for UART I/O when linked with gdb Jiri Gaisler
@ 2015-03-02 1:19 ` Mike Frysinger
0 siblings, 0 replies; 34+ messages in thread
From: Mike Frysinger @ 2015-03-02 1:19 UTC (permalink / raw)
To: Jiri Gaisler; +Cc: gdb-patches
[-- Attachment #1: Type: text/plain, Size: 388 bytes --]
On 01 Mar 2015 22:10, Jiri Gaisler wrote:
> --- a/sim/erc32/sis.h
> +++ b/sim/erc32/sis.h
>
> /* Prototypes */
>
> /* erc32.c */
> -extern void init_sim (void);
> +extern void init_sim ();
> extern void reset (void);
> extern void error_mode (uint32 pc);
> extern void sim_halt (void);
why ? not only does it look unrelated to this patch, this looks wrong.
-mike
[-- Attachment #2: Digital signature --]
[-- Type: application/pgp-signature, Size: 819 bytes --]
^ permalink raw reply [flat|nested] 34+ messages in thread
* Re: [PATCH v3 08/14] sim/erc32: Access memory subsystem through struct memsys.
2015-03-01 21:11 ` [PATCH v3 08/14] sim/erc32: Access memory subsystem through struct memsys Jiri Gaisler
@ 2015-03-02 1:20 ` Mike Frysinger
0 siblings, 0 replies; 34+ messages in thread
From: Mike Frysinger @ 2015-03-02 1:20 UTC (permalink / raw)
To: Jiri Gaisler; +Cc: gdb-patches
[-- Attachment #1: Type: text/plain, Size: 431 bytes --]
On 01 Mar 2015 22:10, Jiri Gaisler wrote:
> --- a/sim/erc32/erc32.c
> +++ b/sim/erc32/erc32.c
>
> -int dumbio = 0; /* normal, smart, terminal oriented IO by default */
> -int tty_setup = 1; /* default setup if not a tty */
> +static int tty_setup = 1; /* default setup if not a tty */
you just added this in patch 7. shouldn't you squash this change into that ?
as well as some of these other uart changes ?
-mike
[-- Attachment #2: Digital signature --]
[-- Type: application/pgp-signature, Size: 819 bytes --]
^ permalink raw reply [flat|nested] 34+ messages in thread
* Re: [PATCH v3 10/14] sim/erc32: Add support for LEON3 processor emulation.
2015-03-01 21:11 ` [PATCH v3 10/14] sim/erc32: Add support for LEON3 processor emulation Jiri Gaisler
@ 2015-03-05 17:35 ` Mike Frysinger
2015-03-05 17:49 ` Joel Brobecker
0 siblings, 1 reply; 34+ messages in thread
From: Mike Frysinger @ 2015-03-05 17:35 UTC (permalink / raw)
To: Jiri Gaisler; +Cc: gdb-patches
[-- Attachment #1: Type: text/plain, Size: 682 bytes --]
On 01 Mar 2015 22:10, Jiri Gaisler wrote:
> + if (sregs.psr & 0x080) asi = 11; else asi = 10;
please unwrap all the new if statements
although in cases like this you could just use the tertiary operator:
asi = (sregs.psr & 0x080) ? 11 : 10;
> + return(memory_read(addr, data, sz, ws));
return isn't a func, so it shouldn't be written like one:
return memory_read(...);
applies to multiple places in this patch.
> +static uint32 apbppmem[32*2]; /* 32-entry APB PP AREA */
space around the * op. applies to multiple places in this patch.
> +static void
> +error_mode(pc)
> + uint32 pc;
> +{
when writing new functions, avoid old func styles
-mike
[-- Attachment #2: Digital signature --]
[-- Type: application/pgp-signature, Size: 819 bytes --]
^ permalink raw reply [flat|nested] 34+ messages in thread
* Re: [PATCH v3 10/14] sim/erc32: Add support for LEON3 processor emulation.
2015-03-05 17:35 ` Mike Frysinger
@ 2015-03-05 17:49 ` Joel Brobecker
2015-03-05 18:20 ` Mike Frysinger
0 siblings, 1 reply; 34+ messages in thread
From: Joel Brobecker @ 2015-03-05 17:49 UTC (permalink / raw)
To: Jiri Gaisler, gdb-patches
> > + return(memory_read(addr, data, sz, ws));
>
> return isn't a func, so it shouldn't be written like one:
> return memory_read(...);
Small formatting nit: space before the '(' in function calls...
--
Joel
^ permalink raw reply [flat|nested] 34+ messages in thread
* Re: [PATCH v3 10/14] sim/erc32: Add support for LEON3 processor emulation.
2015-03-05 17:49 ` Joel Brobecker
@ 2015-03-05 18:20 ` Mike Frysinger
0 siblings, 0 replies; 34+ messages in thread
From: Mike Frysinger @ 2015-03-05 18:20 UTC (permalink / raw)
To: Joel Brobecker; +Cc: Jiri Gaisler, gdb-patches
[-- Attachment #1: Type: text/plain, Size: 409 bytes --]
On 05 Mar 2015 09:49, Joel Brobecker wrote:
> > > + return(memory_read(addr, data, sz, ws));
> >
> > return isn't a func, so it shouldn't be written like one:
> > return memory_read(...);
>
> Small formatting nit: space before the '(' in function calls...
i was letting that one go here because the current code ignores that in most
places. but yeah, that would also be nice to fix.
-mike
[-- Attachment #2: Digital signature --]
[-- Type: application/pgp-signature, Size: 819 bytes --]
^ permalink raw reply [flat|nested] 34+ messages in thread
* Re: [PATCH v3 03/14] sim/erc32: Switched emulated memory to host endian order.
2015-03-02 1:13 ` Mike Frysinger
@ 2015-03-12 21:25 ` Jiri Gaisler
2015-03-12 23:55 ` Mike Frysinger
0 siblings, 1 reply; 34+ messages in thread
From: Jiri Gaisler @ 2015-03-12 21:25 UTC (permalink / raw)
To: gdb-patches
[-- Attachment #1: Type: text/plain, Size: 570 bytes --]
On 02/03/15 02:13, Mike Frysinger wrote:
>> +#ifdef HOST_LITTLE_ENDIAN
>> > + for (i = 0; i < (count / 4); i++) wbuffer[i] = ntohl(wbuffer[i]); // endian swap
>> > +#endif
> sim-endian.h already provides a lot of helper funcs that i'm pretty sure you
> can use here.
>
I don't understand why ntohl() is a problem. It is a common Posix function
that converts big endian to host endian, exactly what is needed. Using
sim-endian.h pulls in a lot of the sim-*.c files due to dependencies and
makes the simulator larger than necessary ....
Jiri.
[-- Attachment #2: OpenPGP digital signature --]
[-- Type: application/pgp-signature, Size: 884 bytes --]
^ permalink raw reply [flat|nested] 34+ messages in thread
* Re: [PATCH v3 03/14] sim/erc32: Switched emulated memory to host endian order.
2015-03-12 21:25 ` Jiri Gaisler
@ 2015-03-12 23:55 ` Mike Frysinger
[not found] ` <55029ED9.5070009@gaisler.se>
0 siblings, 1 reply; 34+ messages in thread
From: Mike Frysinger @ 2015-03-12 23:55 UTC (permalink / raw)
To: Jiri Gaisler; +Cc: gdb-patches
[-- Attachment #1: Type: text/plain, Size: 1426 bytes --]
On 12 Mar 2015 22:25, Jiri Gaisler wrote:
> On 02/03/15 02:13, Mike Frysinger wrote:
> >> +#ifdef HOST_LITTLE_ENDIAN
> >> > + for (i = 0; i < (count / 4); i++) wbuffer[i] = ntohl(wbuffer[i]); // endian swap
> >> > +#endif
> >
> > sim-endian.h already provides a lot of helper funcs that i'm pretty sure you
> > can use here.
>
> I don't understand why ntohl() is a problem. It is a common Posix function
> that converts big endian to host endian, exactly what is needed. Using
> sim-endian.h pulls in a lot of the sim-*.c files due to dependencies and
> makes the simulator larger than necessary ....
"network" has no meaning here. using it as a proxy for moving between big
endian and native endian when there are clear functions that the sim has
standardized on isn't correct. your code also (1) requires duplicating branches
and (2) inline preprocessor checks. it also does not properly handle bi-endian
builds. sim-endian does all of these for you. the whole point of common/ is
to delete code from each sim rather than open coding it everywhere.
wrt size, i don't think that's a compelling argument. we're talking units of
KiB here, and i can't even count that low :P.
if you're having trouble converting the build over (compiling/linking errors),
then we can discuss that. but it'd be a matter of "do we do it now or later"
rather than "do we do ever convert".
-mike
[-- Attachment #2: Digital signature --]
[-- Type: application/pgp-signature, Size: 819 bytes --]
^ permalink raw reply [flat|nested] 34+ messages in thread
* Re: [PATCH v3 05/14] sim/erc32: Use memory_iread() function for instruction fetching.
[not found] ` <55020795.4080009@gaisler.se>
@ 2015-03-13 0:15 ` Mike Frysinger
0 siblings, 0 replies; 34+ messages in thread
From: Mike Frysinger @ 2015-03-13 0:15 UTC (permalink / raw)
To: Jiri Gaisler; +Cc: gdb-patches
[-- Attachment #1: Type: text/plain, Size: 918 bytes --]
[re-adding cc]
On 12 Mar 2015 22:39, Jiri Gaisler wrote:
> On 02/03/15 02:15, Mike Frysinger wrote:
> > On 01 Mar 2015 22:10, Jiri Gaisler wrote:
> >> --- a/sim/erc32/erc32.c
> >> +++ b/sim/erc32/erc32.c
>
> >> + printf("Memory exception at %x (illegal address)\n", addr);
> >
> > space after the printf
> >
> > should this be writing to stderr ?
>
> Not really. The exception occurred in the emulated program, which is not
> uncommon and useful during target debugging. The simulator has not
> encountered any error.
if the sim isn't stopping, i don't think it's correct to display anything at
all. it is valid to simulate code that purposefully makes bad/weird memory
accesses and then recover at runtime using signal handlers. uncommon perhaps,
but not invalid.
for diagnostic info meant for the developer, putting it behind a debug/trace
knob would make more sense.
-mike
[-- Attachment #2: Digital signature --]
[-- Type: application/pgp-signature, Size: 819 bytes --]
^ permalink raw reply [flat|nested] 34+ messages in thread
* Re: [PATCH v3 03/14] sim/erc32: Switched emulated memory to host endian order.
[not found] ` <55029ED9.5070009@gaisler.se>
@ 2015-03-14 7:45 ` Mike Frysinger
[not found] ` <5503FDF9.8000109@gaisler.se>
0 siblings, 1 reply; 34+ messages in thread
From: Mike Frysinger @ 2015-03-14 7:45 UTC (permalink / raw)
To: Jiri Gaisler; +Cc: gdb-patches
[-- Attachment #1: Type: text/plain, Size: 2597 bytes --]
[ read gdb lists to cc ]
On 13 Mar 2015 09:24, Jiri Gaisler wrote:
> On 13/03/15 00:55, Mike Frysinger wrote:
> > On 12 Mar 2015 22:25, Jiri Gaisler wrote:
> >> On 02/03/15 02:13, Mike Frysinger wrote:
> >>>> +#ifdef HOST_LITTLE_ENDIAN
> >>>>> + for (i = 0; i < (count / 4); i++) wbuffer[i] = ntohl(wbuffer[i]); // endian swap
> >>>>> +#endif
> >>>
> >>> sim-endian.h already provides a lot of helper funcs that i'm pretty sure you
> >>> can use here.
> >>
> >> I don't understand why ntohl() is a problem. It is a common Posix function
> >> that converts big endian to host endian, exactly what is needed. Using
> >> sim-endian.h pulls in a lot of the sim-*.c files due to dependencies and
> >> makes the simulator larger than necessary ....
> >
> > "network" has no meaning here. using it as a proxy for moving between big
> > endian and native endian when there are clear functions that the sim has
> > standardized on isn't correct. your code also (1) requires duplicating branches
> > and (2) inline preprocessor checks. it also does not properly handle bi-endian
> > builds. sim-endian does all of these for you. the whole point of common/ is
> > to delete code from each sim rather than open coding it everywhere.
> >
> > wrt size, i don't think that's a compelling argument. we're talking units of
> > KiB here, and i can't even count that low :P.
> >
> > if you're having trouble converting the build over (compiling/linking errors),
> > then we can discuss that. but it'd be a matter of "do we do it now or later"
> > rather than "do we do ever convert".
>
> Right. I tried to use the T2H_4 macro, but can't get it to compile.
> I included <sim-basics.h> and added sim-endian.o and sim-io.o to the
> Makefile, but it complains about unresolved function etc. Do I really
> need to create a sim-main.c and sim-main.h just to use T2H?
i've pushed a patch to bury the sim-io.h include in sim-assert.h (since that's
the header that actually uses the sim_io_xxx funcs). if you define your own
ASSERT/SIM_ASSERT macros, it should be avoided for now. just make sure you add
a note that they should get converted to sim-assert.h at some point.
> Is there
> any documentation whatsoever on how to use the sim/common interface?
not really ... normally you'd use the nrun.c main which implies you'd write the
overall sim in a certain way, so you'd get all the funcs in there for free. but
for existing old sims (like the sparc one), it's harder to deal with.
i've been very slowly converting things over
-mike
[-- Attachment #2: Digital signature --]
[-- Type: application/pgp-signature, Size: 819 bytes --]
^ permalink raw reply [flat|nested] 34+ messages in thread
* Re: [PATCH v3 03/14] sim/erc32: Switched emulated memory to host endian order.
[not found] ` <5503FDF9.8000109@gaisler.se>
@ 2015-03-14 10:24 ` Mike Frysinger
2015-03-14 20:44 ` Jiri Gaisler
0 siblings, 1 reply; 34+ messages in thread
From: Mike Frysinger @ 2015-03-14 10:24 UTC (permalink / raw)
To: Jiri Gaisler; +Cc: gdb-patches
[-- Attachment #1: Type: text/plain, Size: 3565 bytes --]
On 14 Mar 2015 10:23, Jiri Gaisler wrote:
> On 14/03/15 08:45, Mike Frysinger wrote:
> > On 13 Mar 2015 09:24, Jiri Gaisler wrote:
> >> On 13/03/15 00:55, Mike Frysinger wrote:
> >>> On 12 Mar 2015 22:25, Jiri Gaisler wrote:
> >>>> On 02/03/15 02:13, Mike Frysinger wrote:
> >>>>>> +#ifdef HOST_LITTLE_ENDIAN
> >>>>>>> + for (i = 0; i < (count / 4); i++) wbuffer[i] = ntohl(wbuffer[i]); // endian swap
> >>>>>>> +#endif
> >>>>>
> >>>>> sim-endian.h already provides a lot of helper funcs that i'm pretty sure you
> >>>>> can use here.
> >>>>
> >>>> I don't understand why ntohl() is a problem. It is a common Posix function
> >>>> that converts big endian to host endian, exactly what is needed. Using
> >>>> sim-endian.h pulls in a lot of the sim-*.c files due to dependencies and
> >>>> makes the simulator larger than necessary ....
> >>>
> >>> "network" has no meaning here. using it as a proxy for moving between big
> >>> endian and native endian when there are clear functions that the sim has
> >>> standardized on isn't correct. your code also (1) requires duplicating branches
> >>> and (2) inline preprocessor checks. it also does not properly handle bi-endian
> >>> builds. sim-endian does all of these for you. the whole point of common/ is
> >>> to delete code from each sim rather than open coding it everywhere.
> >>>
> >>> wrt size, i don't think that's a compelling argument. we're talking units of
> >>> KiB here, and i can't even count that low :P.
> >>>
> >>> if you're having trouble converting the build over (compiling/linking errors),
> >>> then we can discuss that. but it'd be a matter of "do we do it now or later"
> >>> rather than "do we do ever convert".
> >>
> >> Right. I tried to use the T2H_4 macro, but can't get it to compile.
> >> I included <sim-basics.h> and added sim-endian.o and sim-io.o to the
> >> Makefile, but it complains about unresolved function etc. Do I really
> >> need to create a sim-main.c and sim-main.h just to use T2H?
> >
> > i've pushed a patch to bury the sim-io.h include in sim-assert.h (since that's
> > the header that actually uses the sim_io_xxx funcs). if you define your own
> > ASSERT/SIM_ASSERT macros, it should be avoided for now. just make sure you add
> > a note that they should get converted to sim-assert.h at some point.
>
> I'm not sure this helps. sim-endian.c includes sim-assert.h, so I get the
> same problem even after your patch:
>
> gcc -DHAVE_CONFIG_H -DPROFILE=1 -DWITH_PROFILE=-1 -DWITH_HOST_BYTE_ORDER=LITTLE_ENDIAN -DDEFAULT_INLINE=0 -DFAST_UART -I../../../../../ibm/src/gdb/binutils-gdb/sim/erc32/../.. -I. -I../../../../../ibm/src/gdb/binutils-gdb/sim/erc32 -I../common
> -I../../../../../ibm/src/gdb/binutils-gdb/sim/erc32/../common -I../../include -I../../../../../ibm/src/gdb/binutils-gdb/sim/erc32/../../include -I../../bfd -I../../../../../ibm/src/gdb/binutils-gdb/sim/erc32/../../bfd -I../../opcodes
> -I../../../../../ibm/src/gdb/binutils-gdb/sim/erc32/../../opcodes -g -O2 -static-libstdc++ -static-libgcc -o run \
> run.o libsim.a ../../bfd/libbfd.a ../../opcodes/libopcodes.a ../../libiberty/libiberty.a -ltermcap -ldl -lz -lnsl ../../readline/libreadline.a -ltermcap -lm
> libsim.a(sim-endian.o): In function `offset_1':
> /home/jiri/src/gdb/v4/sim/erc32/../../../../../ibm/src/gdb/binutils-gdb/sim/erc32/../common/sim-n-endian.h:145: undefined reference to `sim_io_error'
did you define ASSERT/SIM_ASSERT before including sim-endian.h ?
-mike
[-- Attachment #2: Digital signature --]
[-- Type: application/pgp-signature, Size: 819 bytes --]
^ permalink raw reply [flat|nested] 34+ messages in thread
* Re: [PATCH v3 03/14] sim/erc32: Switched emulated memory to host endian order.
2015-03-14 10:24 ` Mike Frysinger
@ 2015-03-14 20:44 ` Jiri Gaisler
2015-03-17 8:06 ` Mike Frysinger
0 siblings, 1 reply; 34+ messages in thread
From: Jiri Gaisler @ 2015-03-14 20:44 UTC (permalink / raw)
To: gdb-patches
[-- Attachment #1: Type: text/plain, Size: 4116 bytes --]
On 14/03/15 11:23, Mike Frysinger wrote:
> On 14 Mar 2015 10:23, Jiri Gaisler wrote:
>> On 14/03/15 08:45, Mike Frysinger wrote:
>>> On 13 Mar 2015 09:24, Jiri Gaisler wrote:
>>>> On 13/03/15 00:55, Mike Frysinger wrote:
>>>>> On 12 Mar 2015 22:25, Jiri Gaisler wrote:
>>>>>> On 02/03/15 02:13, Mike Frysinger wrote:
>>>>>>>> +#ifdef HOST_LITTLE_ENDIAN
>>>>>>>>> + for (i = 0; i < (count / 4); i++) wbuffer[i] = ntohl(wbuffer[i]); // endian swap
>>>>>>>>> +#endif
>>>>>>>
>>>>>>> sim-endian.h already provides a lot of helper funcs that i'm pretty sure you
>>>>>>> can use here.
>>>>>>
>>>>>> I don't understand why ntohl() is a problem. It is a common Posix function
>>>>>> that converts big endian to host endian, exactly what is needed. Using
>>>>>> sim-endian.h pulls in a lot of the sim-*.c files due to dependencies and
>>>>>> makes the simulator larger than necessary ....
>>>>>
>>>>> "network" has no meaning here. using it as a proxy for moving between big
>>>>> endian and native endian when there are clear functions that the sim has
>>>>> standardized on isn't correct. your code also (1) requires duplicating branches
>>>>> and (2) inline preprocessor checks. it also does not properly handle bi-endian
>>>>> builds. sim-endian does all of these for you. the whole point of common/ is
>>>>> to delete code from each sim rather than open coding it everywhere.
>>>>>
>>>>> wrt size, i don't think that's a compelling argument. we're talking units of
>>>>> KiB here, and i can't even count that low :P.
>>>>>
>>>>> if you're having trouble converting the build over (compiling/linking errors),
>>>>> then we can discuss that. but it'd be a matter of "do we do it now or later"
>>>>> rather than "do we do ever convert".
>>>>
>>>> Right. I tried to use the T2H_4 macro, but can't get it to compile.
>>>> I included <sim-basics.h> and added sim-endian.o and sim-io.o to the
>>>> Makefile, but it complains about unresolved function etc. Do I really
>>>> need to create a sim-main.c and sim-main.h just to use T2H?
>>>
>>> i've pushed a patch to bury the sim-io.h include in sim-assert.h (since that's
>>> the header that actually uses the sim_io_xxx funcs). if you define your own
>>> ASSERT/SIM_ASSERT macros, it should be avoided for now. just make sure you add
>>> a note that they should get converted to sim-assert.h at some point.
>>
>> I'm not sure this helps. sim-endian.c includes sim-assert.h, so I get the
>> same problem even after your patch:
>>
>> gcc -DHAVE_CONFIG_H -DPROFILE=1 -DWITH_PROFILE=-1 -DWITH_HOST_BYTE_ORDER=LITTLE_ENDIAN -DDEFAULT_INLINE=0 -DFAST_UART -I../../../../../ibm/src/gdb/binutils-gdb/sim/erc32/../.. -I. -I../../../../../ibm/src/gdb/binutils-gdb/sim/erc32 -I../common
>> -I../../../../../ibm/src/gdb/binutils-gdb/sim/erc32/../common -I../../include -I../../../../../ibm/src/gdb/binutils-gdb/sim/erc32/../../include -I../../bfd -I../../../../../ibm/src/gdb/binutils-gdb/sim/erc32/../../bfd -I../../opcodes
>> -I../../../../../ibm/src/gdb/binutils-gdb/sim/erc32/../../opcodes -g -O2 -static-libstdc++ -static-libgcc -o run \
>> run.o libsim.a ../../bfd/libbfd.a ../../opcodes/libopcodes.a ../../libiberty/libiberty.a -ltermcap -ldl -lz -lnsl ../../readline/libreadline.a -ltermcap -lm
>> libsim.a(sim-endian.o): In function `offset_1':
>> /home/jiri/src/gdb/v4/sim/erc32/../../../../../ibm/src/gdb/binutils-gdb/sim/erc32/../common/sim-n-endian.h:145: undefined reference to `sim_io_error'
>
> did you define ASSERT/SIM_ASSERT before including sim-endian.h ?
No, I included sim-basic.h in my code. Including sim-endian.h only will not
work due to dependencies on other include files. I don't see how this will
change how sim-endian.o is built though, as it is compiled separately.
I did manage to compile the code by including sim-endian.c directly into my
own code (func.c) rather then building it separately:
#include <sim-assert.h>
#undef ASSERT
#define ASSERT(x) if (0) {}
#include <sim-endian.c>
Is this acceptable ...?
Jiri.
[-- Attachment #2: OpenPGP digital signature --]
[-- Type: application/pgp-signature, Size: 884 bytes --]
^ permalink raw reply [flat|nested] 34+ messages in thread
* Re: [PATCH v3 04/14] sim/erc32: use SIM_AC_OPTION_HOSTENDIAN to probe for host endianess
2015-03-01 21:11 ` [PATCH v3 04/14] sim/erc32: use SIM_AC_OPTION_HOSTENDIAN to probe for host endianess Jiri Gaisler
@ 2015-03-16 5:19 ` Mike Frysinger
0 siblings, 0 replies; 34+ messages in thread
From: Mike Frysinger @ 2015-03-16 5:19 UTC (permalink / raw)
To: Jiri Gaisler; +Cc: gdb-patches
[-- Attachment #1: Type: text/plain, Size: 115 bytes --]
i've pushed this now as i was trying to make unrelated changes and the end.c
file was breaking the build
-mike
[-- Attachment #2: Digital signature --]
[-- Type: application/pgp-signature, Size: 819 bytes --]
^ permalink raw reply [flat|nested] 34+ messages in thread
* Re: [PATCH v3 03/14] sim/erc32: Switched emulated memory to host endian order.
2015-03-14 20:44 ` Jiri Gaisler
@ 2015-03-17 8:06 ` Mike Frysinger
2015-03-21 20:40 ` Jiri Gaisler
0 siblings, 1 reply; 34+ messages in thread
From: Mike Frysinger @ 2015-03-17 8:06 UTC (permalink / raw)
To: Jiri Gaisler; +Cc: gdb-patches
[-- Attachment #1: Type: text/plain, Size: 4556 bytes --]
On 14 Mar 2015 21:44, Jiri Gaisler wrote:
> On 14/03/15 11:23, Mike Frysinger wrote:
> > On 14 Mar 2015 10:23, Jiri Gaisler wrote:
> >> On 14/03/15 08:45, Mike Frysinger wrote:
> >>> On 13 Mar 2015 09:24, Jiri Gaisler wrote:
> >>>> On 13/03/15 00:55, Mike Frysinger wrote:
> >>>>> On 12 Mar 2015 22:25, Jiri Gaisler wrote:
> >>>>>> On 02/03/15 02:13, Mike Frysinger wrote:
> >>>>>>>> +#ifdef HOST_LITTLE_ENDIAN
> >>>>>>>>> + for (i = 0; i < (count / 4); i++) wbuffer[i] = ntohl(wbuffer[i]); // endian swap
> >>>>>>>>> +#endif
> >>>>>>>
> >>>>>>> sim-endian.h already provides a lot of helper funcs that i'm pretty sure you
> >>>>>>> can use here.
> >>>>>>
> >>>>>> I don't understand why ntohl() is a problem. It is a common Posix function
> >>>>>> that converts big endian to host endian, exactly what is needed. Using
> >>>>>> sim-endian.h pulls in a lot of the sim-*.c files due to dependencies and
> >>>>>> makes the simulator larger than necessary ....
> >>>>>
> >>>>> "network" has no meaning here. using it as a proxy for moving between big
> >>>>> endian and native endian when there are clear functions that the sim has
> >>>>> standardized on isn't correct. your code also (1) requires duplicating branches
> >>>>> and (2) inline preprocessor checks. it also does not properly handle bi-endian
> >>>>> builds. sim-endian does all of these for you. the whole point of common/ is
> >>>>> to delete code from each sim rather than open coding it everywhere.
> >>>>>
> >>>>> wrt size, i don't think that's a compelling argument. we're talking units of
> >>>>> KiB here, and i can't even count that low :P.
> >>>>>
> >>>>> if you're having trouble converting the build over (compiling/linking errors),
> >>>>> then we can discuss that. but it'd be a matter of "do we do it now or later"
> >>>>> rather than "do we do ever convert".
> >>>>
> >>>> Right. I tried to use the T2H_4 macro, but can't get it to compile.
> >>>> I included <sim-basics.h> and added sim-endian.o and sim-io.o to the
> >>>> Makefile, but it complains about unresolved function etc. Do I really
> >>>> need to create a sim-main.c and sim-main.h just to use T2H?
> >>>
> >>> i've pushed a patch to bury the sim-io.h include in sim-assert.h (since that's
> >>> the header that actually uses the sim_io_xxx funcs). if you define your own
> >>> ASSERT/SIM_ASSERT macros, it should be avoided for now. just make sure you add
> >>> a note that they should get converted to sim-assert.h at some point.
> >>
> >> I'm not sure this helps. sim-endian.c includes sim-assert.h, so I get the
> >> same problem even after your patch:
> >>
> >> gcc -DHAVE_CONFIG_H -DPROFILE=1 -DWITH_PROFILE=-1 -DWITH_HOST_BYTE_ORDER=LITTLE_ENDIAN -DDEFAULT_INLINE=0 -DFAST_UART -I../../../../../ibm/src/gdb/binutils-gdb/sim/erc32/../.. -I. -I../../../../../ibm/src/gdb/binutils-gdb/sim/erc32 -I../common
> >> -I../../../../../ibm/src/gdb/binutils-gdb/sim/erc32/../common -I../../include -I../../../../../ibm/src/gdb/binutils-gdb/sim/erc32/../../include -I../../bfd -I../../../../../ibm/src/gdb/binutils-gdb/sim/erc32/../../bfd -I../../opcodes
> >> -I../../../../../ibm/src/gdb/binutils-gdb/sim/erc32/../../opcodes -g -O2 -static-libstdc++ -static-libgcc -o run \
> >> run.o libsim.a ../../bfd/libbfd.a ../../opcodes/libopcodes.a ../../libiberty/libiberty.a -ltermcap -ldl -lz -lnsl ../../readline/libreadline.a -ltermcap -lm
> >> libsim.a(sim-endian.o): In function `offset_1':
> >> /home/jiri/src/gdb/v4/sim/erc32/../../../../../ibm/src/gdb/binutils-gdb/sim/erc32/../common/sim-n-endian.h:145: undefined reference to `sim_io_error'
> >
> > did you define ASSERT/SIM_ASSERT before including sim-endian.h ?
>
> No, I included sim-basic.h in my code. Including sim-endian.h only will not
> work due to dependencies on other include files. I don't see how this will
> change how sim-endian.o is built though, as it is compiled separately.
>
> I did manage to compile the code by including sim-endian.c directly into my
> own code (func.c) rather then building it separately:
>
> #include <sim-assert.h>
> #undef ASSERT
> #define ASSERT(x) if (0) {}
> #include <sim-endian.c>
>
> Is this acceptable ...?
lets go with your first patch with some /* TODO */ added in these areas. we
need to some more clean up in this sim and lay some basic ground work before we
can have it start using common/. i didn't realize just how disconnected erc32
was from everything else.
-mike
[-- Attachment #2: Digital signature --]
[-- Type: application/pgp-signature, Size: 819 bytes --]
^ permalink raw reply [flat|nested] 34+ messages in thread
* Re: [PATCH v3 03/14] sim/erc32: Switched emulated memory to host endian order.
2015-03-17 8:06 ` Mike Frysinger
@ 2015-03-21 20:40 ` Jiri Gaisler
0 siblings, 0 replies; 34+ messages in thread
From: Jiri Gaisler @ 2015-03-21 20:40 UTC (permalink / raw)
To: Mike Frysinger, gdb-patches
-----BEGIN PGP SIGNED MESSAGE-----
Hash: SHA1
On 17/03/15 09:06, Mike Frysinger wrote:
> On 14 Mar 2015 21:44, Jiri Gaisler wrote:
>> On 14/03/15 11:23, Mike Frysinger wrote:
>>> On 14 Mar 2015 10:23, Jiri Gaisler wrote:
>>>> On 14/03/15 08:45, Mike Frysinger wrote:
>>>>> On 13 Mar 2015 09:24, Jiri Gaisler wrote:
>>>>>> On 13/03/15 00:55, Mike Frysinger wrote:
>>>>>>> On 12 Mar 2015 22:25, Jiri Gaisler wrote:
>>>>>>>> On 02/03/15 02:13, Mike Frysinger wrote:
>>>>>>>>>> +#ifdef HOST_LITTLE_ENDIAN
>>>>>>>>>>> + for (i = 0; i < (count / 4); i++) wbuffer[i] = ntohl(wbuffer[i]); // endian swap +#endif
>>>>>>>>>
>>>>>>>>> sim-endian.h already provides a lot of helper funcs that i'm pretty sure you can use here.
>>>>>>>>
>>>>>>>> I don't understand why ntohl() is a problem. It is a common Posix function that converts big endian to host endian, exactly what is needed. Using sim-endian.h pulls in a lot of the sim-*.c files due to dependencies and makes the simulator larger than necessary
>>>>>>>> ....
>>>>>>>
>>>>>>> "network" has no meaning here. using it as a proxy for moving between big endian and native endian when there are clear functions that the sim has standardized on isn't correct. your code also (1) requires duplicating branches and (2) inline preprocessor
>>>>>>> checks. it also does not properly handle bi-endian builds. sim-endian does all of these for you. the whole point of common/ is to delete code from each sim rather than open coding it everywhere.
>>>>>>>
>>>>>>> wrt size, i don't think that's a compelling argument. we're talking units of KiB here, and i can't even count that low :P.
>>>>>>>
>>>>>>> if you're having trouble converting the build over (compiling/linking errors), then we can discuss that. but it'd be a matter of "do we do it now or later" rather than "do we do ever convert".
>>>>>>
>>>>>> Right. I tried to use the T2H_4 macro, but can't get it to compile. I included <sim-basics.h> and added sim-endian.o and sim-io.o to the Makefile, but it complains about unresolved function etc. Do I really need to create a sim-main.c and sim-main.h just to use
>>>>>> T2H?
>>>>>
>>>>> i've pushed a patch to bury the sim-io.h include in sim-assert.h (since that's the header that actually uses the sim_io_xxx funcs). if you define your own ASSERT/SIM_ASSERT macros, it should be avoided for now. just make sure you add a note that they should get
>>>>> converted to sim-assert.h at some point.
>>>>
>>>> I'm not sure this helps. sim-endian.c includes sim-assert.h, so I get the same problem even after your patch:
>>>>
>>>> gcc -DHAVE_CONFIG_H -DPROFILE=1 -DWITH_PROFILE=-1 -DWITH_HOST_BYTE_ORDER=LITTLE_ENDIAN -DDEFAULT_INLINE=0 -DFAST_UART -I../../../../../ibm/src/gdb/binutils-gdb/sim/erc32/../.. -I. -I../../../../../ibm/src/gdb/binutils-gdb/sim/erc32 -I../common
>>>> -I../../../../../ibm/src/gdb/binutils-gdb/sim/erc32/../common -I../../include -I../../../../../ibm/src/gdb/binutils-gdb/sim/erc32/../../include -I../../bfd -I../../../../../ibm/src/gdb/binutils-gdb/sim/erc32/../../bfd -I../../opcodes
>>>> -I../../../../../ibm/src/gdb/binutils-gdb/sim/erc32/../../opcodes -g -O2 -static-libstdc++ -static-libgcc -o run \ run.o libsim.a ../../bfd/libbfd.a ../../opcodes/libopcodes.a ../../libiberty/libiberty.a -ltermcap -ldl -lz -lnsl ../../readline/libreadline.a
>>>> -ltermcap -lm libsim.a(sim-endian.o): In function `offset_1': /home/jiri/src/gdb/v4/sim/erc32/../../../../../ibm/src/gdb/binutils-gdb/sim/erc32/../common/sim-n-endian.h:145: undefined reference to `sim_io_error'
>>>
>>> did you define ASSERT/SIM_ASSERT before including sim-endian.h ?
>>
>> No, I included sim-basic.h in my code. Including sim-endian.h only will not work due to dependencies on other include files. I don't see how this will change how sim-endian.o is built though, as it is compiled separately.
>>
>> I did manage to compile the code by including sim-endian.c directly into my own code (func.c) rather then building it separately:
>>
>> #include <sim-assert.h> #undef ASSERT #define ASSERT(x) if (0) {} #include <sim-endian.c>
>>
>> Is this acceptable ...?
>
> lets go with your first patch with some /* TODO */ added in these areas. we need to some more clean up in this sim and lay some basic ground work before we can have it start using common/. i didn't realize just how disconnected erc32 was from everything else. -mike
v4 of this patch uses sim-endian.c and everything compiles fine.
Should I revert to not using sim-endian.c and post a v5 of the patches?
Jiri.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1
Comment: Using GnuPG with Thunderbird - http://www.enigmail.net/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=vYan
-----END PGP SIGNATURE-----
^ permalink raw reply [flat|nested] 34+ messages in thread
end of thread, other threads:[~2015-03-21 20:40 UTC | newest]
Thread overview: 34+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2015-03-01 21:10 [PATCH v3 00/14] Update of the SPARC SIS simulator Jiri Gaisler
2015-03-01 21:10 ` [PATCH v3 03/14] sim/erc32: Switched emulated memory to host endian order Jiri Gaisler
2015-03-02 1:13 ` Mike Frysinger
2015-03-12 21:25 ` Jiri Gaisler
2015-03-12 23:55 ` Mike Frysinger
[not found] ` <55029ED9.5070009@gaisler.se>
2015-03-14 7:45 ` Mike Frysinger
[not found] ` <5503FDF9.8000109@gaisler.se>
2015-03-14 10:24 ` Mike Frysinger
2015-03-14 20:44 ` Jiri Gaisler
2015-03-17 8:06 ` Mike Frysinger
2015-03-21 20:40 ` Jiri Gaisler
2015-03-01 21:10 ` [PATCH v3 06/14] sim/erc32: Fix a few compiler warnings Jiri Gaisler
2015-03-02 1:18 ` Mike Frysinger
2015-03-01 21:10 ` [PATCH v3 05/14] sim/erc32: Use memory_iread() function for instruction fetching Jiri Gaisler
2015-03-02 1:15 ` Mike Frysinger
[not found] ` <55020795.4080009@gaisler.se>
2015-03-13 0:15 ` Mike Frysinger
2015-03-01 21:10 ` [PATCH v3 02/14] sim/erc32: Removed type mismatch compiler warnings Jiri Gaisler
2015-03-02 1:04 ` Mike Frysinger
2015-03-01 21:11 ` [PATCH v3 09/14] sim/erc32: Move local extern declarations into sis.h Jiri Gaisler
2015-03-01 21:11 ` [PATCH v3 12/14] sim/erc32: Updated documentation Jiri Gaisler
2015-03-01 21:11 ` [PATCH v3 08/14] sim/erc32: Access memory subsystem through struct memsys Jiri Gaisler
2015-03-02 1:20 ` Mike Frysinger
2015-03-01 21:11 ` [PATCH v3 01/14] sim/erc32: Added -v command line switch for verbose output Jiri Gaisler
2015-03-02 0:59 ` Mike Frysinger
2015-03-01 21:11 ` [PATCH v3 13/14] sim/erc32: Add data watchpoint support Jiri Gaisler
2015-03-01 21:11 ` [PATCH v3 11/14] sim/erc32: Add support for LEON2 processor emulation Jiri Gaisler
2015-03-01 21:11 ` [PATCH v3 07/14] sim/erc32: Use gdb callback for UART I/O when linked with gdb Jiri Gaisler
2015-03-02 1:19 ` Mike Frysinger
2015-03-01 21:11 ` [PATCH v3 10/14] sim/erc32: Add support for LEON3 processor emulation Jiri Gaisler
2015-03-05 17:35 ` Mike Frysinger
2015-03-05 17:49 ` Joel Brobecker
2015-03-05 18:20 ` Mike Frysinger
2015-03-01 21:11 ` [PATCH v3 04/14] sim/erc32: use SIM_AC_OPTION_HOSTENDIAN to probe for host endianess Jiri Gaisler
2015-03-16 5:19 ` Mike Frysinger
2015-03-01 21:11 ` [PATCH v3 14/14] Add watchpoint support to gdb simulator interface Jiri Gaisler
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox