From: Will Newton <will.newton@linaro.org>
To: Omair Javaid <omair.javaid@linaro.org>
Cc: "gdb-patches@sourceware.org" <gdb-patches@sourceware.org>,
Patch Tracking <patches@linaro.org>
Subject: Re: [PATCH v3 1/6] Implements support for recording arm/thumb mode coprocessor instructions
Date: Wed, 13 Aug 2014 14:10:00 -0000 [thread overview]
Message-ID: <CANu=DmhTV1rPkiWq3z_67s+Qt3TGbgjF2PAhp0nj1eg+szUVEQ@mail.gmail.com> (raw)
In-Reply-To: <1407935535-27978-2-git-send-email-omair.javaid@linaro.org>
On 13 August 2014 14:12, Omair Javaid <omair.javaid@linaro.org> wrote:
> gdb:
>
> 2014-08-13 Omair Javaid <omair.javaid@linaro.org>
>
> * arm-tdep.c (arm_record_coproc_data_proc): Updated.
> (arm_record_asimd_vfp_coproc): Added record handler for asimd, vfp
> and coprocessor insn.
> (thumb2_record_coproc_insn): New function.
> (thumb2_record_decode_insn_handler): Updated.
> (decode_insn): Updated.
>
> ---
> gdb/arm-tdep.c | 122 ++++++++++++++++++++++++++++++++++++++++++++++++++++-----
> 1 file changed, 112 insertions(+), 10 deletions(-)
>
> diff --git a/gdb/arm-tdep.c b/gdb/arm-tdep.c
> index b746eee..607b92e 100644
> --- a/gdb/arm-tdep.c
> +++ b/gdb/arm-tdep.c
> @@ -11990,20 +11990,80 @@ arm_record_unsupported_insn (insn_decode_record *arm_insn_r)
> return -1;
> }
>
> +/* Handling opcode 110 insns. */
> +
> +static int
> +arm_record_asimd_vfp_coproc (insn_decode_record *arm_insn_r)
> +{
> + uint32_t op, op1, op1_sbit, op1_ebit, coproc;
> +
> + coproc = bits (arm_insn_r->arm_insn, 8, 11);
> + op1 = bits (arm_insn_r->arm_insn, 20, 25);
> + op1_sbit = bit (arm_insn_r->arm_insn, 24);
> + op1_ebit = bit (arm_insn_r->arm_insn, 20);
> + op = bit (arm_insn_r->arm_insn, 4);
op abd op1_sbit appear to be unused.
> +
> + if ((coproc & 0x0e) == 0x0a)
> + {
> + /* Handle extension register ld/st instructions. */
> + if (!(op1 & 0x20))
> + return arm_record_unsupported_insn (arm_insn_r);
> +
> + /* 64-bit transfers between arm core and extension registers. */
> + if ((op1 & 0x3e) == 0x04)
> + return arm_record_unsupported_insn (arm_insn_r);
> + }
> + else
> + {
> + /* Handle coprocessor ld/st instructions. */
> + if (!(op1 & 0x3a))
> + {
> + /* Store. */
> + if (!op1_ebit)
> + return arm_record_unsupported_insn (arm_insn_r);
> + else
> + /* Load. */
> + return arm_record_unsupported_insn (arm_insn_r);
> + }
> +
> + /* Move to coprocessor from two arm core registers. */
> + if (op1 == 0x4)
> + return arm_record_unsupported_insn (arm_insn_r);
> +
> + /* Move to two arm core registers from coprocessor. */
> + if (op1 == 0x5)
> + {
> + uint32_t reg_t[2];
> +
> + reg_t[0] = bits (arm_insn_r->arm_insn, 12, 15);
> + reg_t[1] = bits (arm_insn_r->arm_insn, 16, 19);
> + arm_insn_r->reg_rec_count = 2;
> +
> + REG_ALLOC (arm_insn_r->arm_regs, arm_insn_r->reg_rec_count, reg_t);
> + return 0;
> + }
> + }
> + return arm_record_unsupported_insn (arm_insn_r);
> +}
> +
> /* Handling opcode 111 insns. */
>
> static int
> arm_record_coproc_data_proc (insn_decode_record *arm_insn_r)
> {
> + uint32_t op, op1_sbit, op1_ebit, coproc;
> struct gdbarch_tdep *tdep = gdbarch_tdep (arm_insn_r->gdbarch);
> struct regcache *reg_cache = arm_insn_r->regcache;
> - uint32_t ret = 0; /* function return value: -1:record failure ; 0:success */
> ULONGEST u_regval = 0;
>
> arm_insn_r->opcode = bits (arm_insn_r->arm_insn, 24, 27);
> + coproc = bits (arm_insn_r->arm_insn, 8, 11);
> + op1_sbit = bit (arm_insn_r->arm_insn, 24);
> + op1_ebit = bit (arm_insn_r->arm_insn, 20);
> + op = bit (arm_insn_r->arm_insn, 4);
>
> /* Handle arm SWI/SVC system call instructions. */
> - if (15 == arm_insn_r->opcode)
> + if (op1_sbit)
> {
> if (tdep->arm_syscall_record != NULL)
> {
> @@ -12016,21 +12076,52 @@ arm_record_coproc_data_proc (insn_decode_record *arm_insn_r)
> else /* EABI. */
> regcache_raw_read_unsigned (reg_cache, 7, &svc_number);
>
> - ret = tdep->arm_syscall_record (reg_cache, svc_number);
> + return tdep->arm_syscall_record (reg_cache, svc_number);
> }
> else
> {
> printf_unfiltered (_("no syscall record support\n"));
> - ret = -1;
> + return -1;
> }
> }
> +
> + if ((coproc & 0x0e) == 0x0a)
> + {
> + /* VFP data-processing instructions. */
> + if (!op1_sbit && !op)
> + return arm_record_unsupported_insn (arm_insn_r);
> +
> + /* Advanced SIMD, VFP instructions. */
> + if (!op1_sbit && op)
> + return arm_record_unsupported_insn (arm_insn_r);
> + }
> else
> {
> - arm_record_unsupported_insn (arm_insn_r);
> - ret = -1;
> + /* Coprocessor data operations. */
> + if (!op1_sbit && !op)
> + return arm_record_unsupported_insn (arm_insn_r);
> +
> + /* Move to Coprocessor from ARM core register. */
> + if (!op1_sbit && !op1_ebit && op)
> + return arm_record_unsupported_insn (arm_insn_r);
> +
> + /* Move to arm core register from coprocessor. */
> + if (!op1_sbit && op1_ebit && op)
> + {
> + uint32_t record_buf[1];
> +
> + record_buf[0] = bits (arm_insn_r->arm_insn, 12, 15);
> + if (record_buf[0] == 15)
> + record_buf[0] = ARM_PS_REGNUM;
> +
> + arm_insn_r->reg_rec_count = 1;
> + REG_ALLOC (arm_insn_r->arm_regs, arm_insn_r->reg_rec_count,
> + record_buf);
> + return 0;
> + }
> }
>
> - return ret;
> + return arm_record_unsupported_insn (arm_insn_r);
> }
>
> /* Handling opcode 000 insns. */
> @@ -12946,6 +13037,17 @@ thumb2_record_lmul_lmla_div (insn_decode_record *thumb2_insn_r)
> return ARM_RECORD_SUCCESS;
> }
>
> +/* Record handler for thumb32 coprocessor instructions. */
> +
> +static int
> +thumb2_record_coproc_insn (insn_decode_record *thumb2_insn_r)
> +{
> + if (bit (thumb2_insn_r->arm_insn, 25))
> + return arm_record_coproc_data_proc (thumb2_insn_r);
> + else
> + return arm_record_asimd_vfp_coproc (thumb2_insn_r);
> +}
> +
> /* Decodes thumb2 instruction type and invokes its record handler. */
>
> static unsigned int
> @@ -12977,7 +13079,7 @@ thumb2_record_decode_insn_handler (insn_decode_record *thumb2_insn_r)
> else if (op2 & 0x40)
> {
> /* Co-processor instructions. */
> - arm_record_unsupported_insn (thumb2_insn_r);
> + return thumb2_record_coproc_insn (thumb2_insn_r);
> }
> }
> else if (op1 == 0x02)
> @@ -13043,7 +13145,7 @@ thumb2_record_decode_insn_handler (insn_decode_record *thumb2_insn_r)
> else if (op2 & 0x40)
> {
> /* Co-processor instructions. */
> - return arm_record_unsupported_insn (thumb2_insn_r);
> + return thumb2_record_coproc_insn (thumb2_insn_r);
> }
> }
>
> @@ -13087,7 +13189,7 @@ decode_insn (insn_decode_record *arm_record, record_type_t record_type,
> arm_record_ld_st_reg_offset, /* 011. */
> arm_record_ld_st_multiple, /* 100. */
> arm_record_b_bl, /* 101. */
> - arm_record_unsupported_insn, /* 110. */
> + arm_record_asimd_vfp_coproc, /* 110. */
> arm_record_coproc_data_proc /* 111. */
> };
>
> --
> 1.9.1
>
--
Will Newton
Toolchain Working Group, Linaro
next prev parent reply other threads:[~2014-08-13 14:10 UTC|newest]
Thread overview: 37+ messages / expand[flat|nested] mbox.gz Atom feed top
2014-08-13 13:13 [PATCH v3 0/6] ARM process record/replay improvements Omair Javaid
2014-08-13 13:13 ` [PATCH v3 2/6] Implements support for recording thumb2 ASIMD struct ld/st insn Omair Javaid
2014-08-13 14:10 ` Will Newton
2014-08-27 9:08 ` Omair Javaid
2014-08-27 10:09 ` Pedro Alves
2014-08-28 10:56 ` [PATCH v3 2/6] Implement support for recording thumb2 ASIMD struct ld/st insns Omair Javaid
2014-09-02 14:55 ` Will Newton
2014-09-10 11:16 ` Omair Javaid
2014-09-10 11:54 ` Will Newton
2014-08-13 13:13 ` [PATCH v3 4/6] Implement support for recording extension register ld/st insn Omair Javaid
2014-08-13 14:10 ` Will Newton
2014-08-27 9:21 ` Omair Javaid
2014-08-27 10:17 ` Pedro Alves
2014-08-28 12:56 ` Omair Javaid
2014-09-02 14:59 ` Will Newton
2014-09-10 11:29 ` Omair Javaid
2014-09-10 11:55 ` Will Newton
2014-08-13 13:13 ` [PATCH v3 6/6] Fix reverse-step and reverse-next over undebuggable solib code Omair Javaid
2014-08-27 9:09 ` Omair Javaid
2014-08-27 10:34 ` Pedro Alves
2014-08-13 13:13 ` [PATCH v3 1/6] Implements support for recording arm/thumb mode coprocessor instructions Omair Javaid
2014-08-13 14:10 ` Will Newton [this message]
2014-08-27 9:07 ` Omair Javaid
2014-08-27 10:05 ` Pedro Alves
2014-08-28 9:50 ` [PATCH] Implement " Omair Javaid
2014-09-02 14:51 ` Will Newton
2014-08-13 13:13 ` [PATCH v3 5/6] Implement support for recording vector data transfer instructions Omair Javaid
2014-08-13 14:10 ` Will Newton
2014-08-27 9:09 ` Omair Javaid
2014-08-27 10:19 ` Pedro Alves
2014-08-28 13:07 ` Omair Javaid
2014-08-13 13:13 ` [PATCH v3 3/6] Implement support for recording VFP data processing instructions Omair Javaid
2014-08-13 14:10 ` Will Newton
2014-08-27 9:10 ` Omair Javaid
2014-08-27 10:11 ` Pedro Alves
2014-08-28 11:06 ` Omair Javaid
2014-08-27 9:05 ` [PATCH v3 0/6] ARM process record/replay improvements Omair Javaid
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to='CANu=DmhTV1rPkiWq3z_67s+Qt3TGbgjF2PAhp0nj1eg+szUVEQ@mail.gmail.com' \
--to=will.newton@linaro.org \
--cc=gdb-patches@sourceware.org \
--cc=omair.javaid@linaro.org \
--cc=patches@linaro.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox