From: Tristan Gingold <gingold@adacore.com>
To: Jan Kratochvil <jan.kratochvil@redhat.com>
Cc: Pedro Alves <palves@redhat.com>,
"gdb-patches@sourceware.org ml" <gdb-patches@sourceware.org>
Subject: Re: RFA: Try to include libunwind-ia64.h in libunwind-frame.h
Date: Mon, 13 Feb 2012 08:41:00 -0000 [thread overview]
Message-ID: <D19E242A-9AFA-4A9E-8B13-A1DD9B51FE57@adacore.com> (raw)
In-Reply-To: <20120211140919.GA24043@host2.jankratochvil.net>
On Feb 11, 2012, at 3:09 PM, Jan Kratochvil wrote:
> On Fri, 10 Feb 2012 19:33:34 +0100, Pedro Alves wrote:
>> What about --enable-targets=all, or --target=x86_64-foo --enable-target=ia64-xxx ?
>
> Fixed.
Looks good to me.
[Although I wouldn't have cared about non-ia64 targets, as libunwind is used only by ia64]
Tristan.
>
>
> Thanks,
> Jan
>
>
> 2012-02-11 Jan Kratochvil <jan.kratochvil@redhat.com>
> Tristan Gingold <gingold@adacore.com>
>
> * configure.ac (gdb_target_cpu_has_ia64): New variable. Set it for
> --target and --enable-targets parameters.
> (--with-libunwind=auto): Set enable_libunwind for either of
> libunwind.h or libunwind-ia64.h with $gdb_target_cpu_has_ia64.
> * configure: Regenerate.
> * libunwind-frame.h: Conditionalize the file for HAVE_LIBUNWIND and
> not HAVE_LIBUNWIND_H. Include libunwind-ia64.h instead of libunwind.h
> if possible.
>
> --- a/gdb/configure.ac
> +++ b/gdb/configure.ac
> @@ -184,6 +184,13 @@ fi
> TARGET_OBS=
> all_targets=
>
> +# Set to true if any of the supported targets uses ia64 CPU.
> +# libunwind libraries can be installed for multiple architecture targets but
> +# GDB libunwind-frame.c can support only architecture. If there are multiple
> +# target architectures supported by libunwind prefer ia64 - while GDB can
> +# unwind other architectures on its own GDB can unwind ia64 only with libunwind.
> +gdb_target_cpu_has_ia64=false
> +
> for targ_alias in `echo $target_alias $enable_targets | sed 's/,/ /g'`
> do
> if test "$targ_alias" = "all"; then
> @@ -216,6 +223,12 @@ do
> if test x${want64} = xfalse; then
> . ${srcdir}/../bfd/config.bfd
> fi
> +
> + case "$targ" in
> + ia64*)
> + gdb_target_cpu_has_ia64=true
> + ;;
> + esac
> fi
> done
>
> @@ -241,6 +254,7 @@ if test x${all_targets} = xtrue; then
> else
> TARGET_OBS='$(ALL_TARGET_OBS)'
> fi
> + gdb_target_cpu_has_ia64=true
> fi
>
> AC_SUBST(TARGET_OBS)
> @@ -349,8 +363,10 @@ AS_HELP_STRING([--with-libunwind], [use libunwind frame unwinding support]),
> *) AC_MSG_ERROR(bad value ${withval} for GDB with-libunwind option) ;;
> esac],[
> AC_CHECK_HEADERS(libunwind.h libunwind-ia64.h)
> - if test x"$ac_cv_header_libunwind_h" = xyes -a x"$ac_cv_header_libunwind_ia64_h" = xyes; then
> - enable_libunwind=yes;
> + if $gdb_target_cpu_has_ia64 && test x"$ac_cv_header_libunwind_ia64_h" = xyes; then
> + enable_libunwind=yes
> + elif test x"$ac_cv_header_libunwind_h" = xyes; then
> + enable_libunwind=yes
> fi
> ])
>
> --- a/gdb/libunwind-frame.h
> +++ b/gdb/libunwind-frame.h
> @@ -19,7 +19,7 @@
> You should have received a copy of the GNU General Public License
> along with this program. If not, see <http://www.gnu.org/licenses/>. */
>
> -#ifdef HAVE_LIBUNWIND_H
> +#ifdef HAVE_LIBUNWIND
>
> struct frame_info;
> struct frame_id;
> @@ -29,7 +29,13 @@ struct gdbarch;
> #ifndef LIBUNWIND_FRAME_H
> #define LIBUNWIND_FRAME_H 1
>
> -#include "libunwind.h"
> +#if defined HAVE_LIBUNWIND_IA64_H
> +# include "libunwind-ia64.h"
> +#elif defined HAVE_LIBUNWIND_H
> +# include "libunwind.h"
> +#else
> +# error "HAVE_LIBUNWIND && !HAVE_LIBUNWIND_IA64_H && !HAVE_LIBUNWIND_H"
> +#endif
>
> struct libunwind_descr
> {
> @@ -73,4 +79,4 @@ int libunwind_get_reg_special (struct gdbarch *gdbarch,
>
> #endif /* libunwind-frame.h */
>
> -#endif /* HAVE_LIBUNWIND_H */
> +#endif /* HAVE_LIBUNWIND */
next prev parent reply other threads:[~2012-02-13 8:41 UTC|newest]
Thread overview: 38+ messages / expand[flat|nested] mbox.gz Atom feed top
2012-02-02 16:32 Tristan Gingold
2012-02-10 12:31 ` Jan Kratochvil
2012-02-10 13:15 ` Tristan Gingold
2012-02-10 13:21 ` Jan Kratochvil
2012-02-10 13:27 ` Joel Brobecker
2012-02-10 13:45 ` Tristan Gingold
2012-02-10 14:04 ` Tristan Gingold
2012-02-10 14:09 ` Jan Kratochvil
2012-02-10 14:14 ` Tristan Gingold
2012-02-10 18:27 ` Jan Kratochvil
2012-02-10 18:34 ` Pedro Alves
2012-02-10 18:44 ` Jan Kratochvil
2012-02-10 18:59 ` Pedro Alves
2012-02-10 19:38 ` Jan Kratochvil
2012-02-11 14:10 ` Jan Kratochvil
2012-02-13 8:41 ` Tristan Gingold [this message]
2012-02-13 18:58 ` Pedro Alves
2012-02-13 19:03 ` Jan Kratochvil
2012-02-13 19:20 ` Pedro Alves
2012-02-13 19:27 ` Jan Kratochvil
2012-02-13 20:05 ` Pedro Alves
2012-02-14 7:28 ` Jan Kratochvil
2012-02-14 12:14 ` Pedro Alves
2012-02-14 14:36 ` Jan Kratochvil
2012-02-14 14:53 ` Pedro Alves
2012-02-20 20:54 ` Jan Kratochvil
2012-02-20 22:30 ` Pedro Alves
2012-02-20 22:37 ` Joel Brobecker
2012-02-20 22:39 ` Joel Brobecker
2012-02-20 22:57 ` Pedro Alves
2012-02-20 23:20 ` Joel Brobecker
2012-02-21 6:48 ` Jan Kratochvil
2012-02-21 13:36 ` Pedro Alves
2012-02-21 19:10 ` Tom Tromey
2012-02-22 7:56 ` Tristan Gingold
2012-02-22 14:52 ` Jan Kratochvil
2012-02-21 20:18 ` Jan Kratochvil
2012-02-21 20:43 ` Pedro Alves
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=D19E242A-9AFA-4A9E-8B13-A1DD9B51FE57@adacore.com \
--to=gingold@adacore.com \
--cc=gdb-patches@sourceware.org \
--cc=jan.kratochvil@redhat.com \
--cc=palves@redhat.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox