* [PATCH] A few comment cleanups
@ 2014-12-17 19:01 Simon Marchi
2014-12-17 19:37 ` Doug Evans
0 siblings, 1 reply; 5+ messages in thread
From: Simon Marchi @ 2014-12-17 19:01 UTC (permalink / raw)
To: gdb-patches; +Cc: Simon Marchi
I stumbled upon a few comments that I think are outdated.
Comment for elfread.c (elf_symfile_init): As far as history goes in git,
I don't see anything related to that.
Comment for elfread.c (elf_symfile_read): References a parameter that was
removed in 1999.
Comment for struct sym_fns/sym_offsets: References a parameter that was
changed in 1999.
gdb/ChangeLog:
* elfread.c (elf_symfile_init): Remove stale comment.
(elf_symfile_read): Same.
* symfile.h (struct sym_fns): Same.
---
gdb/elfread.c | 13 +------------
gdb/symfile.h | 6 +-----
2 files changed, 2 insertions(+), 17 deletions(-)
diff --git a/gdb/elfread.c b/gdb/elfread.c
index b4ec067..93e5045 100644
--- a/gdb/elfread.c
+++ b/gdb/elfread.c
@@ -1236,10 +1236,6 @@ elf_read_minimal_symbols (struct objfile *objfile, int symfile_flags,
We have been initialized by a call to elf_symfile_init, which
currently does nothing.
- SECTION_OFFSETS is a set of offsets to apply to relocate the symbols
- in each section. We simplify it down to a single offset for all
- symbols. FIXME.
-
This function only does the minimum work necessary for letting the
user "name" things symbolically; it does not read the entire symtab.
Instead, it reads the external and static symbols and puts them in partial
@@ -1418,14 +1414,7 @@ elf_symfile_finish (struct objfile *objfile)
dwarf2_free_objfile (objfile);
}
-/* ELF specific initialization routine for reading symbols.
-
- It is passed a pointer to a struct sym_fns which contains, among other
- things, the BFD for the file whose symbols are being read, and a slot for
- a pointer to "private data" which we can fill with goodies.
-
- For now at least, we have nothing in particular to do, so this function is
- just a stub. */
+/* ELF specific initialization routine for reading symbols. */
static void
elf_symfile_init (struct objfile *objfile)
diff --git a/gdb/symfile.h b/gdb/symfile.h
index 1e8c230..b2cb089 100644
--- a/gdb/symfile.h
+++ b/gdb/symfile.h
@@ -354,11 +354,7 @@ struct sym_fns
void (*sym_finish) (struct objfile *);
/* This function produces a file-dependent section_offsets
- structure, allocated in the objfile's storage, and based on the
- parameter. The parameter is currently a CORE_ADDR (FIXME!) for
- backward compatibility with the higher levels of GDB. It should
- probably be changed to a string, where NULL means the default,
- and others are parsed in a file dependent way. */
+ structure, allocated in the objfile's storage. */
void (*sym_offsets) (struct objfile *, const struct section_addr_info *);
--
2.1.3
^ permalink raw reply [flat|nested] 5+ messages in thread
* Re: [PATCH] A few comment cleanups
2014-12-17 19:01 [PATCH] A few comment cleanups Simon Marchi
@ 2014-12-17 19:37 ` Doug Evans
2014-12-17 21:45 ` Simon Marchi
0 siblings, 1 reply; 5+ messages in thread
From: Doug Evans @ 2014-12-17 19:37 UTC (permalink / raw)
To: Simon Marchi; +Cc: gdb-patches
On Wed, Dec 17, 2014 at 11:01 AM, Simon Marchi
<simon.marchi@ericsson.com> wrote:
> I stumbled upon a few comments that I think are outdated.
>
> Comment for elfread.c (elf_symfile_init): As far as history goes in git,
> I don't see anything related to that.
>
> Comment for elfread.c (elf_symfile_read): References a parameter that was
> removed in 1999.
>
> Comment for struct sym_fns/sym_offsets: References a parameter that was
> changed in 1999.
>
> gdb/ChangeLog:
>
> * elfread.c (elf_symfile_init): Remove stale comment.
> (elf_symfile_read): Same.
> * symfile.h (struct sym_fns): Same.
Hi.
Ok with one nit, below.
> ---
> gdb/elfread.c | 13 +------------
> gdb/symfile.h | 6 +-----
> 2 files changed, 2 insertions(+), 17 deletions(-)
>
> diff --git a/gdb/elfread.c b/gdb/elfread.c
> index b4ec067..93e5045 100644
> --- a/gdb/elfread.c
> +++ b/gdb/elfread.c
> @@ -1236,10 +1236,6 @@ elf_read_minimal_symbols (struct objfile *objfile, int symfile_flags,
> We have been initialized by a call to elf_symfile_init, which
> currently does nothing.
>
> - SECTION_OFFSETS is a set of offsets to apply to relocate the symbols
> - in each section. We simplify it down to a single offset for all
> - symbols. FIXME.
> -
> This function only does the minimum work necessary for letting the
> user "name" things symbolically; it does not read the entire symtab.
> Instead, it reads the external and static symbols and puts them in partial
> @@ -1418,14 +1414,7 @@ elf_symfile_finish (struct objfile *objfile)
> dwarf2_free_objfile (objfile);
> }
>
> -/* ELF specific initialization routine for reading symbols.
> -
> - It is passed a pointer to a struct sym_fns which contains, among other
> - things, the BFD for the file whose symbols are being read, and a slot for
> - a pointer to "private data" which we can fill with goodies.
> -
> - For now at least, we have nothing in particular to do, so this function is
> - just a stub. */
> +/* ELF specific initialization routine for reading symbols. */
>
> static void
> elf_symfile_init (struct objfile *objfile)
> diff --git a/gdb/symfile.h b/gdb/symfile.h
> index 1e8c230..b2cb089 100644
> --- a/gdb/symfile.h
> +++ b/gdb/symfile.h
> @@ -354,11 +354,7 @@ struct sym_fns
> void (*sym_finish) (struct objfile *);
>
> /* This function produces a file-dependent section_offsets
> - structure, allocated in the objfile's storage, and based on the
> - parameter. The parameter is currently a CORE_ADDR (FIXME!) for
> - backward compatibility with the higher levels of GDB. It should
> - probably be changed to a string, where NULL means the default,
> - and others are parsed in a file dependent way. */
> + structure, allocated in the objfile's storage. */
>
> void (*sym_offsets) (struct objfile *, const struct section_addr_info *);
Can I ask you to document what the struct section_addr_info * argument is for?
^ permalink raw reply [flat|nested] 5+ messages in thread
* Re: [PATCH] A few comment cleanups
2014-12-17 19:37 ` Doug Evans
@ 2014-12-17 21:45 ` Simon Marchi
2014-12-17 22:30 ` Doug Evans
0 siblings, 1 reply; 5+ messages in thread
From: Simon Marchi @ 2014-12-17 21:45 UTC (permalink / raw)
To: Doug Evans; +Cc: gdb-patches
[-- Attachment #1: Type: text/plain, Size: 3696 bytes --]
On 2014-12-17 02:37 PM, Doug Evans wrote:
> On Wed, Dec 17, 2014 at 11:01 AM, Simon Marchi
> <simon.marchi@ericsson.com> wrote:
>> I stumbled upon a few comments that I think are outdated.
>>
>> Comment for elfread.c (elf_symfile_init): As far as history goes in git,
>> I don't see anything related to that.
>>
>> Comment for elfread.c (elf_symfile_read): References a parameter that was
>> removed in 1999.
>>
>> Comment for struct sym_fns/sym_offsets: References a parameter that was
>> changed in 1999.
>>
>> gdb/ChangeLog:
>>
>> * elfread.c (elf_symfile_init): Remove stale comment.
>> (elf_symfile_read): Same.
>> * symfile.h (struct sym_fns): Same.
>
> Hi.
> Ok with one nit, below.
>
>> ---
>> gdb/elfread.c | 13 +------------
>> gdb/symfile.h | 6 +-----
>> 2 files changed, 2 insertions(+), 17 deletions(-)
>>
>> diff --git a/gdb/elfread.c b/gdb/elfread.c
>> index b4ec067..93e5045 100644
>> --- a/gdb/elfread.c
>> +++ b/gdb/elfread.c
>> @@ -1236,10 +1236,6 @@ elf_read_minimal_symbols (struct objfile *objfile, int symfile_flags,
>> We have been initialized by a call to elf_symfile_init, which
>> currently does nothing.
>>
>> - SECTION_OFFSETS is a set of offsets to apply to relocate the symbols
>> - in each section. We simplify it down to a single offset for all
>> - symbols. FIXME.
>> -
>> This function only does the minimum work necessary for letting the
>> user "name" things symbolically; it does not read the entire symtab.
>> Instead, it reads the external and static symbols and puts them in partial
>> @@ -1418,14 +1414,7 @@ elf_symfile_finish (struct objfile *objfile)
>> dwarf2_free_objfile (objfile);
>> }
>>
>> -/* ELF specific initialization routine for reading symbols.
>> -
>> - It is passed a pointer to a struct sym_fns which contains, among other
>> - things, the BFD for the file whose symbols are being read, and a slot for
>> - a pointer to "private data" which we can fill with goodies.
>> -
>> - For now at least, we have nothing in particular to do, so this function is
>> - just a stub. */
>> +/* ELF specific initialization routine for reading symbols. */
>>
>> static void
>> elf_symfile_init (struct objfile *objfile)
>> diff --git a/gdb/symfile.h b/gdb/symfile.h
>> index 1e8c230..b2cb089 100644
>> --- a/gdb/symfile.h
>> +++ b/gdb/symfile.h
>> @@ -354,11 +354,7 @@ struct sym_fns
>> void (*sym_finish) (struct objfile *);
>>
>> /* This function produces a file-dependent section_offsets
>> - structure, allocated in the objfile's storage, and based on the
>> - parameter. The parameter is currently a CORE_ADDR (FIXME!) for
>> - backward compatibility with the higher levels of GDB. It should
>> - probably be changed to a string, where NULL means the default,
>> - and others are parsed in a file dependent way. */
>> + structure, allocated in the objfile's storage. */
>>
>> void (*sym_offsets) (struct objfile *, const struct section_addr_info *);
>
> Can I ask you to document what the struct section_addr_info * argument is for?
>
Hmm I am not sure my knowledge allows me to produce a useful comment. Don't hesitate to
correct/enhance. Here is my first shot, after a bit of code reading:
/* This function produces a file-dependent section_offsets
structure, allocated in the objfile's storage.
The section_addr_info structure contains the offset of loadable and
allocated sections, relative to the absolute offsets found in the BFD. */
void (*sym_offsets) (struct objfile *, const struct section_addr_info *);
[-- Attachment #2: S/MIME Cryptographic Signature --]
[-- Type: application/pkcs7-signature, Size: 4079 bytes --]
^ permalink raw reply [flat|nested] 5+ messages in thread
* Re: [PATCH] A few comment cleanups
2014-12-17 21:45 ` Simon Marchi
@ 2014-12-17 22:30 ` Doug Evans
2014-12-18 18:26 ` Simon Marchi
0 siblings, 1 reply; 5+ messages in thread
From: Doug Evans @ 2014-12-17 22:30 UTC (permalink / raw)
To: Simon Marchi; +Cc: gdb-patches
On Wed, Dec 17, 2014 at 1:45 PM, Simon Marchi <simon.marchi@ericsson.com> wrote:
> On 2014-12-17 02:37 PM, Doug Evans wrote:
>> On Wed, Dec 17, 2014 at 11:01 AM, Simon Marchi
>> <simon.marchi@ericsson.com> wrote:
>>> I stumbled upon a few comments that I think are outdated.
>>>
>>> Comment for elfread.c (elf_symfile_init): As far as history goes in git,
>>> I don't see anything related to that.
>>>
>>> Comment for elfread.c (elf_symfile_read): References a parameter that was
>>> removed in 1999.
>>>
>>> Comment for struct sym_fns/sym_offsets: References a parameter that was
>>> changed in 1999.
>>>
>>> gdb/ChangeLog:
>>>
>>> * elfread.c (elf_symfile_init): Remove stale comment.
>>> (elf_symfile_read): Same.
>>> * symfile.h (struct sym_fns): Same.
>>
>> Hi.
>> Ok with one nit, below.
>>
>>> ---
>>> gdb/elfread.c | 13 +------------
>>> gdb/symfile.h | 6 +-----
>>> 2 files changed, 2 insertions(+), 17 deletions(-)
>>>
>>> diff --git a/gdb/elfread.c b/gdb/elfread.c
>>> index b4ec067..93e5045 100644
>>> --- a/gdb/elfread.c
>>> +++ b/gdb/elfread.c
>>> @@ -1236,10 +1236,6 @@ elf_read_minimal_symbols (struct objfile *objfile, int symfile_flags,
>>> We have been initialized by a call to elf_symfile_init, which
>>> currently does nothing.
>>>
>>> - SECTION_OFFSETS is a set of offsets to apply to relocate the symbols
>>> - in each section. We simplify it down to a single offset for all
>>> - symbols. FIXME.
>>> -
>>> This function only does the minimum work necessary for letting the
>>> user "name" things symbolically; it does not read the entire symtab.
>>> Instead, it reads the external and static symbols and puts them in partial
>>> @@ -1418,14 +1414,7 @@ elf_symfile_finish (struct objfile *objfile)
>>> dwarf2_free_objfile (objfile);
>>> }
>>>
>>> -/* ELF specific initialization routine for reading symbols.
>>> -
>>> - It is passed a pointer to a struct sym_fns which contains, among other
>>> - things, the BFD for the file whose symbols are being read, and a slot for
>>> - a pointer to "private data" which we can fill with goodies.
>>> -
>>> - For now at least, we have nothing in particular to do, so this function is
>>> - just a stub. */
>>> +/* ELF specific initialization routine for reading symbols. */
>>>
>>> static void
>>> elf_symfile_init (struct objfile *objfile)
>>> diff --git a/gdb/symfile.h b/gdb/symfile.h
>>> index 1e8c230..b2cb089 100644
>>> --- a/gdb/symfile.h
>>> +++ b/gdb/symfile.h
>>> @@ -354,11 +354,7 @@ struct sym_fns
>>> void (*sym_finish) (struct objfile *);
>>>
>>> /* This function produces a file-dependent section_offsets
>>> - structure, allocated in the objfile's storage, and based on the
>>> - parameter. The parameter is currently a CORE_ADDR (FIXME!) for
>>> - backward compatibility with the higher levels of GDB. It should
>>> - probably be changed to a string, where NULL means the default,
>>> - and others are parsed in a file dependent way. */
>>> + structure, allocated in the objfile's storage. */
>>>
>>> void (*sym_offsets) (struct objfile *, const struct section_addr_info *);
>>
>> Can I ask you to document what the struct section_addr_info * argument is for?
>>
>
> Hmm I am not sure my knowledge allows me to produce a useful comment. Don't hesitate to
> correct/enhance. Here is my first shot, after a bit of code reading:
>
> /* This function produces a file-dependent section_offsets
> structure, allocated in the objfile's storage.
>
> The section_addr_info structure contains the offset of loadable and
> allocated sections, relative to the absolute offsets found in the BFD. */
>
> void (*sym_offsets) (struct objfile *, const struct section_addr_info *);
"works for me"
Thanks!
^ permalink raw reply [flat|nested] 5+ messages in thread
* Re: [PATCH] A few comment cleanups
2014-12-17 22:30 ` Doug Evans
@ 2014-12-18 18:26 ` Simon Marchi
0 siblings, 0 replies; 5+ messages in thread
From: Simon Marchi @ 2014-12-18 18:26 UTC (permalink / raw)
To: Doug Evans; +Cc: gdb-patches
[-- Attachment #1: Type: text/plain, Size: 7611 bytes --]
On 2014-12-17 05:30 PM, Doug Evans wrote:
> On Wed, Dec 17, 2014 at 1:45 PM, Simon Marchi <simon.marchi@ericsson.com> wrote:
>> On 2014-12-17 02:37 PM, Doug Evans wrote:
>>> On Wed, Dec 17, 2014 at 11:01 AM, Simon Marchi
>>> <simon.marchi@ericsson.com> wrote:
>>>> I stumbled upon a few comments that I think are outdated.
>>>>
>>>> Comment for elfread.c (elf_symfile_init): As far as history goes in git,
>>>> I don't see anything related to that.
>>>>
>>>> Comment for elfread.c (elf_symfile_read): References a parameter that was
>>>> removed in 1999.
>>>>
>>>> Comment for struct sym_fns/sym_offsets: References a parameter that was
>>>> changed in 1999.
>>>>
>>>> gdb/ChangeLog:
>>>>
>>>> * elfread.c (elf_symfile_init): Remove stale comment.
>>>> (elf_symfile_read): Same.
>>>> * symfile.h (struct sym_fns): Same.
>>>
>>> Hi.
>>> Ok with one nit, below.
>>>
>>>> ---
>>>> gdb/elfread.c | 13 +------------
>>>> gdb/symfile.h | 6 +-----
>>>> 2 files changed, 2 insertions(+), 17 deletions(-)
>>>>
>>>> diff --git a/gdb/elfread.c b/gdb/elfread.c
>>>> index b4ec067..93e5045 100644
>>>> --- a/gdb/elfread.c
>>>> +++ b/gdb/elfread.c
>>>> @@ -1236,10 +1236,6 @@ elf_read_minimal_symbols (struct objfile *objfile, int symfile_flags,
>>>> We have been initialized by a call to elf_symfile_init, which
>>>> currently does nothing.
>>>>
>>>> - SECTION_OFFSETS is a set of offsets to apply to relocate the symbols
>>>> - in each section. We simplify it down to a single offset for all
>>>> - symbols. FIXME.
>>>> -
>>>> This function only does the minimum work necessary for letting the
>>>> user "name" things symbolically; it does not read the entire symtab.
>>>> Instead, it reads the external and static symbols and puts them in partial
>>>> @@ -1418,14 +1414,7 @@ elf_symfile_finish (struct objfile *objfile)
>>>> dwarf2_free_objfile (objfile);
>>>> }
>>>>
>>>> -/* ELF specific initialization routine for reading symbols.
>>>> -
>>>> - It is passed a pointer to a struct sym_fns which contains, among other
>>>> - things, the BFD for the file whose symbols are being read, and a slot for
>>>> - a pointer to "private data" which we can fill with goodies.
>>>> -
>>>> - For now at least, we have nothing in particular to do, so this function is
>>>> - just a stub. */
>>>> +/* ELF specific initialization routine for reading symbols. */
>>>>
>>>> static void
>>>> elf_symfile_init (struct objfile *objfile)
>>>> diff --git a/gdb/symfile.h b/gdb/symfile.h
>>>> index 1e8c230..b2cb089 100644
>>>> --- a/gdb/symfile.h
>>>> +++ b/gdb/symfile.h
>>>> @@ -354,11 +354,7 @@ struct sym_fns
>>>> void (*sym_finish) (struct objfile *);
>>>>
>>>> /* This function produces a file-dependent section_offsets
>>>> - structure, allocated in the objfile's storage, and based on the
>>>> - parameter. The parameter is currently a CORE_ADDR (FIXME!) for
>>>> - backward compatibility with the higher levels of GDB. It should
>>>> - probably be changed to a string, where NULL means the default,
>>>> - and others are parsed in a file dependent way. */
>>>> + structure, allocated in the objfile's storage. */
>>>>
>>>> void (*sym_offsets) (struct objfile *, const struct section_addr_info *);
>>>
>>> Can I ask you to document what the struct section_addr_info * argument is for?
>>>
>>
>> Hmm I am not sure my knowledge allows me to produce a useful comment. Don't hesitate to
>> correct/enhance. Here is my first shot, after a bit of code reading:
>>
>> /* This function produces a file-dependent section_offsets
>> structure, allocated in the objfile's storage.
>>
>> The section_addr_info structure contains the offset of loadable and
>> allocated sections, relative to the absolute offsets found in the BFD. */
>>
>> void (*sym_offsets) (struct objfile *, const struct section_addr_info *);
>
> "works for me"
>
> Thanks!
Pushed with that change, thanks!
From db7a9bcd53534a32abf4d75a93838c6bdbf876fa Mon Sep 17 00:00:00 2001
From: Simon Marchi <simon.marchi@ericsson.com>
Date: Thu, 18 Dec 2014 11:39:44 -0500
Subject: [PATCH] A few comment cleanups
I stumbled upon a few comments that I think are outdated.
Comment for elfread.c (elf_symfile_init): As far as history goes in git,
I don't see anything related to that.
Comment for elfread.c (elf_symfile_read): References a parameter that was
removed in 1999.
Comment for struct sym_fns/sym_offsets: References a parameter that was
changed in 1999.
gdb/ChangeLog:
* elfread.c (elf_symfile_init): Remove stale comment.
(elf_symfile_read): Same.
* symfile.h (struct sym_fns): Same.
---
gdb/ChangeLog | 6 ++++++
gdb/elfread.c | 13 +------------
gdb/symfile.h | 10 +++++-----
3 files changed, 12 insertions(+), 17 deletions(-)
diff --git a/gdb/ChangeLog b/gdb/ChangeLog
index 348a48f..adb24d4 100644
--- a/gdb/ChangeLog
+++ b/gdb/ChangeLog
@@ -1,3 +1,9 @@
+2014-12-18 Simon Marchi <simon.marchi@ericsson.com>
+
+ * elfread.c (elf_symfile_init): Remove stale comment.
+ (elf_symfile_read): Same.
+ * symfile.h (struct sym_fns): Same.
+
2014-12-18 Nigel Stephens <nigel@mips.com>
Maciej W. Rozycki <macro@codesourcery.com>
diff --git a/gdb/elfread.c b/gdb/elfread.c
index b4ec067..93e5045 100644
--- a/gdb/elfread.c
+++ b/gdb/elfread.c
@@ -1236,10 +1236,6 @@ elf_read_minimal_symbols (struct objfile *objfile, int symfile_flags,
We have been initialized by a call to elf_symfile_init, which
currently does nothing.
- SECTION_OFFSETS is a set of offsets to apply to relocate the symbols
- in each section. We simplify it down to a single offset for all
- symbols. FIXME.
-
This function only does the minimum work necessary for letting the
user "name" things symbolically; it does not read the entire symtab.
Instead, it reads the external and static symbols and puts them in partial
@@ -1418,14 +1414,7 @@ elf_symfile_finish (struct objfile *objfile)
dwarf2_free_objfile (objfile);
}
-/* ELF specific initialization routine for reading symbols.
-
- It is passed a pointer to a struct sym_fns which contains, among other
- things, the BFD for the file whose symbols are being read, and a slot for
- a pointer to "private data" which we can fill with goodies.
-
- For now at least, we have nothing in particular to do, so this function is
- just a stub. */
+/* ELF specific initialization routine for reading symbols. */
static void
elf_symfile_init (struct objfile *objfile)
diff --git a/gdb/symfile.h b/gdb/symfile.h
index 1e8c230..081bc4e 100644
--- a/gdb/symfile.h
+++ b/gdb/symfile.h
@@ -353,12 +353,12 @@ struct sym_fns
void (*sym_finish) (struct objfile *);
+
/* This function produces a file-dependent section_offsets
- structure, allocated in the objfile's storage, and based on the
- parameter. The parameter is currently a CORE_ADDR (FIXME!) for
- backward compatibility with the higher levels of GDB. It should
- probably be changed to a string, where NULL means the default,
- and others are parsed in a file dependent way. */
+ structure, allocated in the objfile's storage.
+
+ The section_addr_info structure contains the offset of loadable and
+ allocated sections, relative to the absolute offsets found in the BFD. */
void (*sym_offsets) (struct objfile *, const struct section_addr_info *);
--
2.1.3
[-- Attachment #2: S/MIME Cryptographic Signature --]
[-- Type: application/pkcs7-signature, Size: 4079 bytes --]
^ permalink raw reply [flat|nested] 5+ messages in thread
end of thread, other threads:[~2014-12-18 18:26 UTC | newest]
Thread overview: 5+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2014-12-17 19:01 [PATCH] A few comment cleanups Simon Marchi
2014-12-17 19:37 ` Doug Evans
2014-12-17 21:45 ` Simon Marchi
2014-12-17 22:30 ` Doug Evans
2014-12-18 18:26 ` Simon Marchi
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox