* [ltt-dev] Newibie questions: How to run LTT
@ 2008-12-23 18:12 Bizhan Gholikhamseh (bgholikh)
2008-12-23 18:12 ` Bizhan Gholikhamseh (bgholikh)
` (2 more replies)
0 siblings, 3 replies; 11+ messages in thread
From: Bizhan Gholikhamseh (bgholikh) @ 2008-12-23 18:12 UTC (permalink / raw)
Hi All,
I finally got some patch to apply to the 2.6.11 (Legcy software) to
enable the LTT (older version) on our embedded system.
Reading documentation it say the first thing I need to do is:
mkdir /mnt/relayfs
mount -t relayfs nodev /mnt/redlayfs.
It fails, is there any better documentation on what to do with this
older verison please?
Thanks,
B.
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.casi.polymtl.ca/pipermail/lttng-dev/attachments/20081223/dc64e226/attachment-0002.htm>
^ permalink raw reply [flat|nested] 11+ messages in thread
* [ltt-dev] Newibie questions: How to run LTT
2008-12-23 18:12 [ltt-dev] Newibie questions: How to run LTT Bizhan Gholikhamseh (bgholikh)
@ 2008-12-23 18:12 ` Bizhan Gholikhamseh (bgholikh)
2008-12-23 18:12 ` Bizhan Gholikhamseh (bgholikh)
[not found] ` <1E65288790442545B413D69F2A8D27DE04568F41@ERLD164A.ww004.siemens.net>
2 siblings, 0 replies; 11+ messages in thread
From: Bizhan Gholikhamseh (bgholikh) @ 2008-12-23 18:12 UTC (permalink / raw)
Hi All,
I finally got some patch to apply to the 2.6.11 (Legcy software) to
enable the LTT (older version) on our embedded system.
Reading documentation it say the first thing I need to do is:
mkdir /mnt/relayfs
mount -t relayfs nodev /mnt/redlayfs.
It fails, is there any better documentation on what to do with this
older verison please?
Thanks,
B.
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.casi.polymtl.ca/pipermail/lttng-dev/attachments/20081223/dc64e226/attachment-0001.htm>
^ permalink raw reply [flat|nested] 11+ messages in thread
* [ltt-dev] Newibie questions: How to run LTT
2008-12-23 18:12 [ltt-dev] Newibie questions: How to run LTT Bizhan Gholikhamseh (bgholikh)
2008-12-23 18:12 ` Bizhan Gholikhamseh (bgholikh)
@ 2008-12-23 18:12 ` Bizhan Gholikhamseh (bgholikh)
[not found] ` <1E65288790442545B413D69F2A8D27DE04568F41@ERLD164A.ww004.siemens.net>
2 siblings, 0 replies; 11+ messages in thread
From: Bizhan Gholikhamseh (bgholikh) @ 2008-12-23 18:12 UTC (permalink / raw)
Hi All,
I finally got some patch to apply to the 2.6.11 (Legcy software) to
enable the LTT (older version) on our embedded system.
Reading documentation it say the first thing I need to do is:
mkdir /mnt/relayfs
mount -t relayfs nodev /mnt/redlayfs.
It fails, is there any better documentation on what to do with this
older verison please?
Thanks,
B.
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.casi.polymtl.ca/pipermail/ltt-dev/attachments/20081223/dc64e226/attachment.htm>
^ permalink raw reply [flat|nested] 11+ messages in thread
* [ltt-dev] Newibie questions: How to run LTT
[not found] ` <1E65288790442545B413D69F2A8D27DE04568F41@ERLD164A.ww004.siemens.net>
@ 2008-12-23 18:29 ` Bizhan Gholikhamseh (bgholikh)
2008-12-23 18:37 ` Akyurek, Ali (EXT)
0 siblings, 1 reply; 11+ messages in thread
From: Bizhan Gholikhamseh (bgholikh) @ 2008-12-23 18:29 UTC (permalink / raw)
HI,
Yes, but I get the following error:
CTS:>mount -t relayfs nodev /mnt/relayfs
mount: Mounting nodev on /mnt/relayfs failed: No such device
> -----Original Message-----
> From: Akyurek, Ali (EXT) [mailto:ali.akyurek.ext@siemens.com]
> Sent: Tuesday, December 23, 2008 10:24 AM
> To: Bizhan Gholikhamseh (bgholikh)
> Subject: AW: [ltt-dev] Newibie questions: How to run LTT
>
> Hi, is CONFIG_RELAYFS_FS enabled in kernel configuration?
>
> ________________________________
>
> Von: Bizhan Gholikhamseh (bgholikh) [mailto:bgholikh at cisco.com]
> Gesendet: Dienstag, 23. Dezember 2008 19:13
> An: ltt-dev at lists.casi.polymtl.ca
> Betreff: [ltt-dev] Newibie questions: How to run LTT
>
>
>
> Hi All,
>
> I finally got some patch to apply to the 2.6.11 (Legcy software) to
enable
> the LTT (older version) on our embedded system.
>
> Reading documentation it say the first thing I need to do is:
>
> mkdir /mnt/relayfs
>
> mount -t relayfs nodev /mnt/redlayfs.
>
>
>
> It fails, is there any better documentation on what to do with this
older
> verison please?
>
>
>
> Thanks,
>
> B.
^ permalink raw reply [flat|nested] 11+ messages in thread
* [ltt-dev] Newibie questions: How to run LTT
2008-12-23 18:29 ` Bizhan Gholikhamseh (bgholikh)
@ 2008-12-23 18:37 ` Akyurek, Ali (EXT)
2008-12-23 18:51 ` Bizhan Gholikhamseh (bgholikh)
0 siblings, 1 reply; 11+ messages in thread
From: Akyurek, Ali (EXT) @ 2008-12-23 18:37 UTC (permalink / raw)
Hi, Could you please try this one:
mount -t relayfs relayfs /mnt/relay
-----Urspr?ngliche Nachricht-----
Von: Bizhan Gholikhamseh (bgholikh) [mailto:bgholikh at cisco.com]
Gesendet: Dienstag, 23. Dezember 2008 19:30
An: Akyurek, Ali (EXT)
Cc: ltt-dev at lists.casi.polymtl.ca
Betreff: RE: [ltt-dev] Newibie questions: How to run LTT
HI,
Yes, but I get the following error:
CTS:>mount -t relayfs nodev /mnt/relayfs
mount: Mounting nodev on /mnt/relayfs failed: No such device
> -----Original Message-----
> From: Akyurek, Ali (EXT) [mailto:ali.akyurek.ext@siemens.com]
> Sent: Tuesday, December 23, 2008 10:24 AM
> To: Bizhan Gholikhamseh (bgholikh)
> Subject: AW: [ltt-dev] Newibie questions: How to run LTT
>
> Hi, is CONFIG_RELAYFS_FS enabled in kernel configuration?
>
> ________________________________
>
> Von: Bizhan Gholikhamseh (bgholikh) [mailto:bgholikh at cisco.com]
> Gesendet: Dienstag, 23. Dezember 2008 19:13
> An: ltt-dev at lists.casi.polymtl.ca
> Betreff: [ltt-dev] Newibie questions: How to run LTT
>
>
>
> Hi All,
>
> I finally got some patch to apply to the 2.6.11 (Legcy software) to
enable
> the LTT (older version) on our embedded system.
>
> Reading documentation it say the first thing I need to do is:
>
> mkdir /mnt/relayfs
>
> mount -t relayfs nodev /mnt/redlayfs.
>
>
>
> It fails, is there any better documentation on what to do with this
older
> verison please?
>
>
>
> Thanks,
>
> B.
^ permalink raw reply [flat|nested] 11+ messages in thread
* [ltt-dev] Newibie questions: How to run LTT
2008-12-23 18:37 ` Akyurek, Ali (EXT)
@ 2008-12-23 18:51 ` Bizhan Gholikhamseh (bgholikh)
2008-12-23 18:55 ` Akyurek, Ali (EXT)
0 siblings, 1 reply; 11+ messages in thread
From: Bizhan Gholikhamseh (bgholikh) @ 2008-12-23 18:51 UTC (permalink / raw)
HI,
Thanks for helping me out, It still fails:
CTS:>mount -t relayfs relayfs /mnt/relay
mount: Mounting relayfs on /mnt/relay failed: No such device
> -----Original Message-----
> From: Akyurek, Ali (EXT) [mailto:ali.akyurek.ext@siemens.com]
> Sent: Tuesday, December 23, 2008 10:38 AM
> To: Bizhan Gholikhamseh (bgholikh)
> Cc: ltt-dev at lists.casi.polymtl.ca
> Subject: AW: [ltt-dev] Newibie questions: How to run LTT
>
>
> Hi, Could you please try this one:
>
> mount -t relayfs relayfs /mnt/relay
>
>
> -----Urspr?ngliche Nachricht-----
> Von: Bizhan Gholikhamseh (bgholikh) [mailto:bgholikh at cisco.com]
> Gesendet: Dienstag, 23. Dezember 2008 19:30
> An: Akyurek, Ali (EXT)
> Cc: ltt-dev at lists.casi.polymtl.ca
> Betreff: RE: [ltt-dev] Newibie questions: How to run LTT
>
> HI,
> Yes, but I get the following error:
>
> CTS:>mount -t relayfs nodev /mnt/relayfs
> mount: Mounting nodev on /mnt/relayfs failed: No such device
>
>
> > -----Original Message-----
> > From: Akyurek, Ali (EXT) [mailto:ali.akyurek.ext@siemens.com]
> > Sent: Tuesday, December 23, 2008 10:24 AM
> > To: Bizhan Gholikhamseh (bgholikh)
> > Subject: AW: [ltt-dev] Newibie questions: How to run LTT
> >
> > Hi, is CONFIG_RELAYFS_FS enabled in kernel configuration?
> >
> > ________________________________
> >
> > Von: Bizhan Gholikhamseh (bgholikh) [mailto:bgholikh at cisco.com]
> > Gesendet: Dienstag, 23. Dezember 2008 19:13
> > An: ltt-dev at lists.casi.polymtl.ca
> > Betreff: [ltt-dev] Newibie questions: How to run LTT
> >
> >
> >
> > Hi All,
> >
> > I finally got some patch to apply to the 2.6.11 (Legcy software) to
> enable
> > the LTT (older version) on our embedded system.
> >
> > Reading documentation it say the first thing I need to do is:
> >
> > mkdir /mnt/relayfs
> >
> > mount -t relayfs nodev /mnt/redlayfs.
> >
> >
> >
> > It fails, is there any better documentation on what to do with this
> older
> > verison please?
> >
> >
> >
> > Thanks,
> >
> > B.
^ permalink raw reply [flat|nested] 11+ messages in thread
* [ltt-dev] Newibie questions: How to run LTT
2008-12-23 18:51 ` Bizhan Gholikhamseh (bgholikh)
@ 2008-12-23 18:55 ` Akyurek, Ali (EXT)
2008-12-23 19:04 ` Bizhan Gholikhamseh (bgholikh)
0 siblings, 1 reply; 11+ messages in thread
From: Akyurek, Ali (EXT) @ 2008-12-23 18:55 UTC (permalink / raw)
Hi, but i don't know anymore to do.:(
Is relayfs module or builtin to the kernel?
If it is module, are you sure it is loaded succesfully?
-----Urspr?ngliche Nachricht-----
Von: Bizhan Gholikhamseh (bgholikh) [mailto:bgholikh at cisco.com]
Gesendet: Dienstag, 23. Dezember 2008 19:52
An: Akyurek, Ali (EXT)
Cc: ltt-dev at lists.casi.polymtl.ca
Betreff: RE: [ltt-dev] Newibie questions: How to run LTT
HI,
Thanks for helping me out, It still fails:
CTS:>mount -t relayfs relayfs /mnt/relay
mount: Mounting relayfs on /mnt/relay failed: No such device
> -----Original Message-----
> From: Akyurek, Ali (EXT) [mailto:ali.akyurek.ext@siemens.com]
> Sent: Tuesday, December 23, 2008 10:38 AM
> To: Bizhan Gholikhamseh (bgholikh)
> Cc: ltt-dev at lists.casi.polymtl.ca
> Subject: AW: [ltt-dev] Newibie questions: How to run LTT
>
>
> Hi, Could you please try this one:
>
> mount -t relayfs relayfs /mnt/relay
>
>
> -----Urspr?ngliche Nachricht-----
> Von: Bizhan Gholikhamseh (bgholikh) [mailto:bgholikh at cisco.com]
> Gesendet: Dienstag, 23. Dezember 2008 19:30
> An: Akyurek, Ali (EXT)
> Cc: ltt-dev at lists.casi.polymtl.ca
> Betreff: RE: [ltt-dev] Newibie questions: How to run LTT
>
> HI,
> Yes, but I get the following error:
>
> CTS:>mount -t relayfs nodev /mnt/relayfs
> mount: Mounting nodev on /mnt/relayfs failed: No such device
>
>
> > -----Original Message-----
> > From: Akyurek, Ali (EXT) [mailto:ali.akyurek.ext@siemens.com]
> > Sent: Tuesday, December 23, 2008 10:24 AM
> > To: Bizhan Gholikhamseh (bgholikh)
> > Subject: AW: [ltt-dev] Newibie questions: How to run LTT
> >
> > Hi, is CONFIG_RELAYFS_FS enabled in kernel configuration?
> >
> > ________________________________
> >
> > Von: Bizhan Gholikhamseh (bgholikh) [mailto:bgholikh at cisco.com]
> > Gesendet: Dienstag, 23. Dezember 2008 19:13
> > An: ltt-dev at lists.casi.polymtl.ca
> > Betreff: [ltt-dev] Newibie questions: How to run LTT
> >
> >
> >
> > Hi All,
> >
> > I finally got some patch to apply to the 2.6.11 (Legcy software) to
> enable
> > the LTT (older version) on our embedded system.
> >
> > Reading documentation it say the first thing I need to do is:
> >
> > mkdir /mnt/relayfs
> >
> > mount -t relayfs nodev /mnt/redlayfs.
> >
> >
> >
> > It fails, is there any better documentation on what to do with this
> older
> > verison please?
> >
> >
> >
> > Thanks,
> >
> > B.
^ permalink raw reply [flat|nested] 11+ messages in thread
* [ltt-dev] Newibie questions: How to run LTT
2008-12-23 18:55 ` Akyurek, Ali (EXT)
@ 2008-12-23 19:04 ` Bizhan Gholikhamseh (bgholikh)
2008-12-23 19:11 ` Akyurek, Ali (EXT)
0 siblings, 1 reply; 11+ messages in thread
From: Bizhan Gholikhamseh (bgholikh) @ 2008-12-23 19:04 UTC (permalink / raw)
HI,
It could be related to the "mount" version I am using??
> -----Original Message-----
> From: Akyurek, Ali (EXT) [mailto:ali.akyurek.ext@siemens.com]
> Sent: Tuesday, December 23, 2008 10:56 AM
> To: Bizhan Gholikhamseh (bgholikh)
> Cc: ltt-dev at lists.casi.polymtl.ca
> Subject: AW: [ltt-dev] Newibie questions: How to run LTT
>
> Hi, but i don't know anymore to do.:(
>
> Is relayfs module or builtin to the kernel?
>
> If it is module, are you sure it is loaded succesfully?
>
> -----Urspr?ngliche Nachricht-----
> Von: Bizhan Gholikhamseh (bgholikh) [mailto:bgholikh at cisco.com]
> Gesendet: Dienstag, 23. Dezember 2008 19:52
> An: Akyurek, Ali (EXT)
> Cc: ltt-dev at lists.casi.polymtl.ca
> Betreff: RE: [ltt-dev] Newibie questions: How to run LTT
>
> HI,
> Thanks for helping me out, It still fails:
>
> CTS:>mount -t relayfs relayfs /mnt/relay
> mount: Mounting relayfs on /mnt/relay failed: No such device
>
>
> > -----Original Message-----
> > From: Akyurek, Ali (EXT) [mailto:ali.akyurek.ext@siemens.com]
> > Sent: Tuesday, December 23, 2008 10:38 AM
> > To: Bizhan Gholikhamseh (bgholikh)
> > Cc: ltt-dev at lists.casi.polymtl.ca
> > Subject: AW: [ltt-dev] Newibie questions: How to run LTT
> >
> >
> > Hi, Could you please try this one:
> >
> > mount -t relayfs relayfs /mnt/relay
> >
> >
> > -----Urspr?ngliche Nachricht-----
> > Von: Bizhan Gholikhamseh (bgholikh) [mailto:bgholikh at cisco.com]
> > Gesendet: Dienstag, 23. Dezember 2008 19:30
> > An: Akyurek, Ali (EXT)
> > Cc: ltt-dev at lists.casi.polymtl.ca
> > Betreff: RE: [ltt-dev] Newibie questions: How to run LTT
> >
> > HI,
> > Yes, but I get the following error:
> >
> > CTS:>mount -t relayfs nodev /mnt/relayfs
> > mount: Mounting nodev on /mnt/relayfs failed: No such device
> >
> >
> > > -----Original Message-----
> > > From: Akyurek, Ali (EXT) [mailto:ali.akyurek.ext@siemens.com]
> > > Sent: Tuesday, December 23, 2008 10:24 AM
> > > To: Bizhan Gholikhamseh (bgholikh)
> > > Subject: AW: [ltt-dev] Newibie questions: How to run LTT
> > >
> > > Hi, is CONFIG_RELAYFS_FS enabled in kernel configuration?
> > >
> > > ________________________________
> > >
> > > Von: Bizhan Gholikhamseh (bgholikh) [mailto:bgholikh at cisco.com]
> > > Gesendet: Dienstag, 23. Dezember 2008 19:13
> > > An: ltt-dev at lists.casi.polymtl.ca
> > > Betreff: [ltt-dev] Newibie questions: How to run LTT
> > >
> > >
> > >
> > > Hi All,
> > >
> > > I finally got some patch to apply to the 2.6.11 (Legcy software) to
> > enable
> > > the LTT (older version) on our embedded system.
> > >
> > > Reading documentation it say the first thing I need to do is:
> > >
> > > mkdir /mnt/relayfs
> > >
> > > mount -t relayfs nodev /mnt/redlayfs.
> > >
> > >
> > >
> > > It fails, is there any better documentation on what to do with this
> > older
> > > verison please?
> > >
> > >
> > >
> > > Thanks,
> > >
> > > B.
^ permalink raw reply [flat|nested] 11+ messages in thread
* [ltt-dev] Newibie questions: How to run LTT
2008-12-23 19:04 ` Bizhan Gholikhamseh (bgholikh)
@ 2008-12-23 19:11 ` Akyurek, Ali (EXT)
2008-12-23 19:12 ` Bizhan Gholikhamseh (bgholikh)
0 siblings, 1 reply; 11+ messages in thread
From: Akyurek, Ali (EXT) @ 2008-12-23 19:11 UTC (permalink / raw)
Hi,
I don't think, but then you'd better ask this to relayfs creaters.
-----Urspr?ngliche Nachricht-----
Von: Bizhan Gholikhamseh (bgholikh) [mailto:bgholikh at cisco.com]
Gesendet: Dienstag, 23. Dezember 2008 20:05
An: Akyurek, Ali (EXT)
Cc: ltt-dev at lists.casi.polymtl.ca
Betreff: RE: [ltt-dev] Newibie questions: How to run LTT
HI,
It could be related to the "mount" version I am using??
> -----Original Message-----
> From: Akyurek, Ali (EXT) [mailto:ali.akyurek.ext@siemens.com]
> Sent: Tuesday, December 23, 2008 10:56 AM
> To: Bizhan Gholikhamseh (bgholikh)
> Cc: ltt-dev at lists.casi.polymtl.ca
> Subject: AW: [ltt-dev] Newibie questions: How to run LTT
>
> Hi, but i don't know anymore to do.:(
>
> Is relayfs module or builtin to the kernel?
>
> If it is module, are you sure it is loaded succesfully?
>
> -----Urspr?ngliche Nachricht-----
> Von: Bizhan Gholikhamseh (bgholikh) [mailto:bgholikh at cisco.com]
> Gesendet: Dienstag, 23. Dezember 2008 19:52
> An: Akyurek, Ali (EXT)
> Cc: ltt-dev at lists.casi.polymtl.ca
> Betreff: RE: [ltt-dev] Newibie questions: How to run LTT
>
> HI,
> Thanks for helping me out, It still fails:
>
> CTS:>mount -t relayfs relayfs /mnt/relay
> mount: Mounting relayfs on /mnt/relay failed: No such device
>
>
> > -----Original Message-----
> > From: Akyurek, Ali (EXT) [mailto:ali.akyurek.ext@siemens.com]
> > Sent: Tuesday, December 23, 2008 10:38 AM
> > To: Bizhan Gholikhamseh (bgholikh)
> > Cc: ltt-dev at lists.casi.polymtl.ca
> > Subject: AW: [ltt-dev] Newibie questions: How to run LTT
> >
> >
> > Hi, Could you please try this one:
> >
> > mount -t relayfs relayfs /mnt/relay
> >
> >
> > -----Urspr?ngliche Nachricht-----
> > Von: Bizhan Gholikhamseh (bgholikh) [mailto:bgholikh at cisco.com]
> > Gesendet: Dienstag, 23. Dezember 2008 19:30
> > An: Akyurek, Ali (EXT)
> > Cc: ltt-dev at lists.casi.polymtl.ca
> > Betreff: RE: [ltt-dev] Newibie questions: How to run LTT
> >
> > HI,
> > Yes, but I get the following error:
> >
> > CTS:>mount -t relayfs nodev /mnt/relayfs
> > mount: Mounting nodev on /mnt/relayfs failed: No such device
> >
> >
> > > -----Original Message-----
> > > From: Akyurek, Ali (EXT) [mailto:ali.akyurek.ext@siemens.com]
> > > Sent: Tuesday, December 23, 2008 10:24 AM
> > > To: Bizhan Gholikhamseh (bgholikh)
> > > Subject: AW: [ltt-dev] Newibie questions: How to run LTT
> > >
> > > Hi, is CONFIG_RELAYFS_FS enabled in kernel configuration?
> > >
> > > ________________________________
> > >
> > > Von: Bizhan Gholikhamseh (bgholikh) [mailto:bgholikh at cisco.com]
> > > Gesendet: Dienstag, 23. Dezember 2008 19:13
> > > An: ltt-dev at lists.casi.polymtl.ca
> > > Betreff: [ltt-dev] Newibie questions: How to run LTT
> > >
> > >
> > >
> > > Hi All,
> > >
> > > I finally got some patch to apply to the 2.6.11 (Legcy software) to
> > enable
> > > the LTT (older version) on our embedded system.
> > >
> > > Reading documentation it say the first thing I need to do is:
> > >
> > > mkdir /mnt/relayfs
> > >
> > > mount -t relayfs nodev /mnt/redlayfs.
> > >
> > >
> > >
> > > It fails, is there any better documentation on what to do with this
> > older
> > > verison please?
> > >
> > >
> > >
> > > Thanks,
> > >
> > > B.
^ permalink raw reply [flat|nested] 11+ messages in thread
* [ltt-dev] Newibie questions: How to run LTT
2008-12-23 19:11 ` Akyurek, Ali (EXT)
@ 2008-12-23 19:12 ` Bizhan Gholikhamseh (bgholikh)
2008-12-23 19:15 ` Akyurek, Ali (EXT)
0 siblings, 1 reply; 11+ messages in thread
From: Bizhan Gholikhamseh (bgholikh) @ 2008-12-23 19:12 UTC (permalink / raw)
HI
Do you know what is the email address of the relayfs creator?
> -----Original Message-----
> From: Akyurek, Ali (EXT) [mailto:ali.akyurek.ext@siemens.com]
> Sent: Tuesday, December 23, 2008 11:11 AM
> To: Bizhan Gholikhamseh (bgholikh)
> Cc: ltt-dev at lists.casi.polymtl.ca
> Subject: AW: [ltt-dev] Newibie questions: How to run LTT
>
>
> Hi,
> I don't think, but then you'd better ask this to relayfs creaters.
>
>
> -----Urspr?ngliche Nachricht-----
> Von: Bizhan Gholikhamseh (bgholikh) [mailto:bgholikh at cisco.com]
> Gesendet: Dienstag, 23. Dezember 2008 20:05
> An: Akyurek, Ali (EXT)
> Cc: ltt-dev at lists.casi.polymtl.ca
> Betreff: RE: [ltt-dev] Newibie questions: How to run LTT
>
> HI,
> It could be related to the "mount" version I am using??
>
>
> > -----Original Message-----
> > From: Akyurek, Ali (EXT) [mailto:ali.akyurek.ext@siemens.com]
> > Sent: Tuesday, December 23, 2008 10:56 AM
> > To: Bizhan Gholikhamseh (bgholikh)
> > Cc: ltt-dev at lists.casi.polymtl.ca
> > Subject: AW: [ltt-dev] Newibie questions: How to run LTT
> >
> > Hi, but i don't know anymore to do.:(
> >
> > Is relayfs module or builtin to the kernel?
> >
> > If it is module, are you sure it is loaded succesfully?
> >
> > -----Urspr?ngliche Nachricht-----
> > Von: Bizhan Gholikhamseh (bgholikh) [mailto:bgholikh at cisco.com]
> > Gesendet: Dienstag, 23. Dezember 2008 19:52
> > An: Akyurek, Ali (EXT)
> > Cc: ltt-dev at lists.casi.polymtl.ca
> > Betreff: RE: [ltt-dev] Newibie questions: How to run LTT
> >
> > HI,
> > Thanks for helping me out, It still fails:
> >
> > CTS:>mount -t relayfs relayfs /mnt/relay
> > mount: Mounting relayfs on /mnt/relay failed: No such device
> >
> >
> > > -----Original Message-----
> > > From: Akyurek, Ali (EXT) [mailto:ali.akyurek.ext@siemens.com]
> > > Sent: Tuesday, December 23, 2008 10:38 AM
> > > To: Bizhan Gholikhamseh (bgholikh)
> > > Cc: ltt-dev at lists.casi.polymtl.ca
> > > Subject: AW: [ltt-dev] Newibie questions: How to run LTT
> > >
> > >
> > > Hi, Could you please try this one:
> > >
> > > mount -t relayfs relayfs /mnt/relay
> > >
> > >
> > > -----Urspr?ngliche Nachricht-----
> > > Von: Bizhan Gholikhamseh (bgholikh) [mailto:bgholikh at cisco.com]
> > > Gesendet: Dienstag, 23. Dezember 2008 19:30
> > > An: Akyurek, Ali (EXT)
> > > Cc: ltt-dev at lists.casi.polymtl.ca
> > > Betreff: RE: [ltt-dev] Newibie questions: How to run LTT
> > >
> > > HI,
> > > Yes, but I get the following error:
> > >
> > > CTS:>mount -t relayfs nodev /mnt/relayfs
> > > mount: Mounting nodev on /mnt/relayfs failed: No such device
> > >
> > >
> > > > -----Original Message-----
> > > > From: Akyurek, Ali (EXT) [mailto:ali.akyurek.ext@siemens.com]
> > > > Sent: Tuesday, December 23, 2008 10:24 AM
> > > > To: Bizhan Gholikhamseh (bgholikh)
> > > > Subject: AW: [ltt-dev] Newibie questions: How to run LTT
> > > >
> > > > Hi, is CONFIG_RELAYFS_FS enabled in kernel configuration?
> > > >
> > > > ________________________________
> > > >
> > > > Von: Bizhan Gholikhamseh (bgholikh) [mailto:bgholikh at cisco.com]
> > > > Gesendet: Dienstag, 23. Dezember 2008 19:13
> > > > An: ltt-dev at lists.casi.polymtl.ca
> > > > Betreff: [ltt-dev] Newibie questions: How to run LTT
> > > >
> > > >
> > > >
> > > > Hi All,
> > > >
> > > > I finally got some patch to apply to the 2.6.11 (Legcy software) to
> > > enable
> > > > the LTT (older version) on our embedded system.
> > > >
> > > > Reading documentation it say the first thing I need to do is:
> > > >
> > > > mkdir /mnt/relayfs
> > > >
> > > > mount -t relayfs nodev /mnt/redlayfs.
> > > >
> > > >
> > > >
> > > > It fails, is there any better documentation on what to do with this
> > > older
> > > > verison please?
> > > >
> > > >
> > > >
> > > > Thanks,
> > > >
> > > > B.
^ permalink raw reply [flat|nested] 11+ messages in thread
* [ltt-dev] Newibie questions: How to run LTT
2008-12-23 19:12 ` Bizhan Gholikhamseh (bgholikh)
@ 2008-12-23 19:15 ` Akyurek, Ali (EXT)
0 siblings, 0 replies; 11+ messages in thread
From: Akyurek, Ali (EXT) @ 2008-12-23 19:15 UTC (permalink / raw)
Yep, http://relayfs.sourceforge.net/contact.html
Good luck.
-----Urspr?ngliche Nachricht-----
Von: Bizhan Gholikhamseh (bgholikh) [mailto:bgholikh at cisco.com]
Gesendet: Dienstag, 23. Dezember 2008 20:13
An: Akyurek, Ali (EXT)
Cc: ltt-dev at lists.casi.polymtl.ca
Betreff: RE: [ltt-dev] Newibie questions: How to run LTT
HI
Do you know what is the email address of the relayfs creator?
> -----Original Message-----
> From: Akyurek, Ali (EXT) [mailto:ali.akyurek.ext@siemens.com]
> Sent: Tuesday, December 23, 2008 11:11 AM
> To: Bizhan Gholikhamseh (bgholikh)
> Cc: ltt-dev at lists.casi.polymtl.ca
> Subject: AW: [ltt-dev] Newibie questions: How to run LTT
>
>
> Hi,
> I don't think, but then you'd better ask this to relayfs creaters.
>
>
> -----Urspr?ngliche Nachricht-----
> Von: Bizhan Gholikhamseh (bgholikh) [mailto:bgholikh at cisco.com]
> Gesendet: Dienstag, 23. Dezember 2008 20:05
> An: Akyurek, Ali (EXT)
> Cc: ltt-dev at lists.casi.polymtl.ca
> Betreff: RE: [ltt-dev] Newibie questions: How to run LTT
>
> HI,
> It could be related to the "mount" version I am using??
>
>
> > -----Original Message-----
> > From: Akyurek, Ali (EXT) [mailto:ali.akyurek.ext@siemens.com]
> > Sent: Tuesday, December 23, 2008 10:56 AM
> > To: Bizhan Gholikhamseh (bgholikh)
> > Cc: ltt-dev at lists.casi.polymtl.ca
> > Subject: AW: [ltt-dev] Newibie questions: How to run LTT
> >
> > Hi, but i don't know anymore to do.:(
> >
> > Is relayfs module or builtin to the kernel?
> >
> > If it is module, are you sure it is loaded succesfully?
> >
> > -----Urspr?ngliche Nachricht-----
> > Von: Bizhan Gholikhamseh (bgholikh) [mailto:bgholikh at cisco.com]
> > Gesendet: Dienstag, 23. Dezember 2008 19:52
> > An: Akyurek, Ali (EXT)
> > Cc: ltt-dev at lists.casi.polymtl.ca
> > Betreff: RE: [ltt-dev] Newibie questions: How to run LTT
> >
> > HI,
> > Thanks for helping me out, It still fails:
> >
> > CTS:>mount -t relayfs relayfs /mnt/relay
> > mount: Mounting relayfs on /mnt/relay failed: No such device
> >
> >
> > > -----Original Message-----
> > > From: Akyurek, Ali (EXT) [mailto:ali.akyurek.ext@siemens.com]
> > > Sent: Tuesday, December 23, 2008 10:38 AM
> > > To: Bizhan Gholikhamseh (bgholikh)
> > > Cc: ltt-dev at lists.casi.polymtl.ca
> > > Subject: AW: [ltt-dev] Newibie questions: How to run LTT
> > >
> > >
> > > Hi, Could you please try this one:
> > >
> > > mount -t relayfs relayfs /mnt/relay
> > >
> > >
> > > -----Urspr?ngliche Nachricht-----
> > > Von: Bizhan Gholikhamseh (bgholikh) [mailto:bgholikh at cisco.com]
> > > Gesendet: Dienstag, 23. Dezember 2008 19:30
> > > An: Akyurek, Ali (EXT)
> > > Cc: ltt-dev at lists.casi.polymtl.ca
> > > Betreff: RE: [ltt-dev] Newibie questions: How to run LTT
> > >
> > > HI,
> > > Yes, but I get the following error:
> > >
> > > CTS:>mount -t relayfs nodev /mnt/relayfs
> > > mount: Mounting nodev on /mnt/relayfs failed: No such device
> > >
> > >
> > > > -----Original Message-----
> > > > From: Akyurek, Ali (EXT) [mailto:ali.akyurek.ext@siemens.com]
> > > > Sent: Tuesday, December 23, 2008 10:24 AM
> > > > To: Bizhan Gholikhamseh (bgholikh)
> > > > Subject: AW: [ltt-dev] Newibie questions: How to run LTT
> > > >
> > > > Hi, is CONFIG_RELAYFS_FS enabled in kernel configuration?
> > > >
> > > > ________________________________
> > > >
> > > > Von: Bizhan Gholikhamseh (bgholikh) [mailto:bgholikh at cisco.com]
> > > > Gesendet: Dienstag, 23. Dezember 2008 19:13
> > > > An: ltt-dev at lists.casi.polymtl.ca
> > > > Betreff: [ltt-dev] Newibie questions: How to run LTT
> > > >
> > > >
> > > >
> > > > Hi All,
> > > >
> > > > I finally got some patch to apply to the 2.6.11 (Legcy software) to
> > > enable
> > > > the LTT (older version) on our embedded system.
> > > >
> > > > Reading documentation it say the first thing I need to do is:
> > > >
> > > > mkdir /mnt/relayfs
> > > >
> > > > mount -t relayfs nodev /mnt/redlayfs.
> > > >
> > > >
> > > >
> > > > It fails, is there any better documentation on what to do with this
> > > older
> > > > verison please?
> > > >
> > > >
> > > >
> > > > Thanks,
> > > >
> > > > B.
^ permalink raw reply [flat|nested] 11+ messages in thread
end of thread, other threads:[~2008-12-23 19:15 UTC | newest]
Thread overview: 11+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2008-12-23 18:12 [ltt-dev] Newibie questions: How to run LTT Bizhan Gholikhamseh (bgholikh)
2008-12-23 18:12 ` Bizhan Gholikhamseh (bgholikh)
2008-12-23 18:12 ` Bizhan Gholikhamseh (bgholikh)
[not found] ` <1E65288790442545B413D69F2A8D27DE04568F41@ERLD164A.ww004.siemens.net>
2008-12-23 18:29 ` Bizhan Gholikhamseh (bgholikh)
2008-12-23 18:37 ` Akyurek, Ali (EXT)
2008-12-23 18:51 ` Bizhan Gholikhamseh (bgholikh)
2008-12-23 18:55 ` Akyurek, Ali (EXT)
2008-12-23 19:04 ` Bizhan Gholikhamseh (bgholikh)
2008-12-23 19:11 ` Akyurek, Ali (EXT)
2008-12-23 19:12 ` Bizhan Gholikhamseh (bgholikh)
2008-12-23 19:15 ` Akyurek, Ali (EXT)
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox