Re: remote debugging on one serial line

Re: remote debugging on one serial line

[Michael Elizabeth Chastain]

Hello Agust,

> I.e. I have to use the same line for console (minicom), file transfer
> (rzsz) and remote gdb with gdbserver.  My question is: has anybody been
> successfull in doing that and if so how?

Perhaps you could run ppp on the serial line to get to TCP/IP protocol.
Then use telnet for the console access, ftp for the file transfer,
and normal TCP/IP for gdb server.

Just a thought,

Michael C

Re: remote debugging on one serial line

[Kris Warkentin]

> Hello Agust,
>
> > I.e. I have to use the same line for console (minicom), file transfer
> > (rzsz) and remote gdb with gdbserver.  My question is: has anybody been
> > successfull in doing that and if so how?
>
> Perhaps you could run ppp on the serial line to get to TCP/IP protocol.
> Then use telnet for the console access, ftp for the file transfer,
> and normal TCP/IP for gdb server.

This is the solution we recommend to our customers who debug over serial and
we've found it to be very successful (except for the pain of setting up ppp
but ymmv ;-)

Kris

RE: remote debugging on one serial line

[Agust Karlsson]

> -----Original Message-----
> From:	Kris Warkentin [SMTP:kewarken@qnx.com]
> Sent:	Friday, January 17, 2003 8:07 PM
> To:	Michael Elizabeth Chastain; gdb@sources.redhat.com; Gusti@pallas.dk
> Subject:	Re: remote debugging on one serial line
> 
> > Hello Agust,
> >
> > > I.e. I have to use the same line for console (minicom), file transfer
> > > (rzsz) and remote gdb with gdbserver.  My question is: has anybody
> been
> > > successfull in doing that and if so how?
> >
> > Perhaps you could run ppp on the serial line to get to TCP/IP protocol.
> > Then use telnet for the console access, ftp for the file transfer,
> > and normal TCP/IP for gdb server.
> 
> This is the solution we recommend to our customers who debug over serial
> and
> we've found it to be very successful (except for the pain of setting up
> ppp
> but ymmv ;-)
> 
	Unfortunatly that is not a possibility as my kernel goes to big to
fit in the limited ROM I have if I compile the TCP/IP support into the
kernel.

	Gusti
--
Agust Karlsson            mailto:gusti@pallas.dk
Pallas Informatik A/S     http://www.pallas.dk
Allerød Stationsvej 2D    Tel.: +45 48 10 24 10
DK-3450 Allerød           Fax.: +45 48 10 24 01

remote debugging on one serial line

[Agust Karlsson]

I am developing an embedded linux system on a platform (AMD Elan SC400)
where I only have one serial line available for all communications with the
host.
I.e. I have to use the same line for console (minicom), file transfer (rzsz)
and remote gdb with gdbserver.
My question is: has anybody been successfull in doing that and if so how?

Best regards
Gusti

--
Agust Karlsson            mailto:gusti@pallas.dk
Pallas Informatik A/S     http://www.pallas.dk
Allerød Stationsvej 2D    Tel.: +45 48 10 24 10
DK-3450 Allerød           Fax.: +45 48 10 24 01