From: Tom Tromey <tromey@redhat.com>
To: Kevin Pouget <kevin.pouget@gmail.com>
Cc: gdb-patches@sourceware.org
Subject: Re: [RFC] Python Finish Breakpoints
Date: Tue, 20 Dec 2011 20:55:00 -0000 [thread overview]
Message-ID: <m34nwvges0.fsf@fleche.redhat.com> (raw)
In-Reply-To: <CAPftXU+ck+RVjxBZba6YEQa+yOMj1sPrD=k21aKXzbWevH6epg@mail.gmail.com> (Kevin Pouget's message of "Fri, 9 Dec 2011 10:31:45 +0100")
>>>>> "Kevin" == Kevin Pouget <kevin.pouget@gmail.com> writes:
Kevin> 2011-12-09 Kevin Pouget <kevin.pouget@st.com>
Kevin> Introduce gdb.FinishBreakpoint in Python
[...]
One last little thing, in the test suite.
Kevin> diff --git a/gdb/testsuite/gdb.python/py-finish-breakpoint.exp b/gdb/testsuite/gdb.python/py-finish-breakpoint.exp
Kevin> +if $tracelevel then {
Kevin> + strace $tracelevel
Kevin> +}
Here, this needs to check whether shlibs are ok, like:
if {[skip_shlib_tests]} {
untested $name.exp
return -1
}
Kevin> +# Start with a fresh gdb.
Kevin> +clean_restart ${testfile}
After clean_restart you need
gdb_load_shlibs $lib_sl
I think there are a few of these in this .exp file.
I don't think you really needed shared libraries for this test, but now
that you did it, it is fine.
Patch ok with this fixed up. Thanks!
Tom
next prev parent reply other threads:[~2011-12-20 20:38 UTC|newest]
Thread overview: 74+ messages / expand[flat|nested] mbox.gz Atom feed top
[not found] <BANLkTim+YH64zkWvdz2_kVUUj=AJ7v4LKw@mail.gmail.com>
[not found] ` <BANLkTi=gtHzWzXOJzB+a19=jkfk1hGwQBg@mail.gmail.com>
[not found] ` <BANLkTikVdqbMqjguTV8ct0TWiBDhHGYtLg@mail.gmail.com>
2011-05-11 7:44 ` Kevin Pouget
2011-05-11 10:31 ` Phil Muldoon
2011-05-11 11:29 ` Kevin Pouget
2011-05-12 10:38 ` Kevin Pouget
2011-05-12 10:50 ` Phil Muldoon
2011-05-12 11:29 ` Kevin Pouget
[not found] ` <BANLkTi=Eu-5B4YyhP2rGdQXgXbBN-EmLKA@mail.gmail.com>
[not found] ` <BANLkTikt2hEUcXkGVH44NaUcwiF1SGdMaw@mail.gmail.com>
[not found] ` <BANLkTi=UpgogckTD5MZsW+PC5d2F8X-+jA@mail.gmail.com>
[not found] ` <BANLkTi==bj50mZgFKq_qA-+3-2CQA3tBVw@mail.gmail.com>
[not found] ` <BANLkTimmYEmvKT_984jYEVZnA5RGFpEgNw@mail.gmail.com>
2011-05-19 16:21 ` Tom Tromey
2011-05-24 12:51 ` Kevin Pouget
2011-05-27 20:30 ` Tom Tromey
2011-05-30 9:29 ` Kevin Pouget
2011-10-13 14:34 ` Kevin Pouget
2011-10-20 20:12 ` Tom Tromey
2011-10-20 20:58 ` Tom Tromey
2011-10-21 8:15 ` Kevin Pouget
2011-10-24 11:43 ` Kevin Pouget
2011-10-24 13:20 ` Eli Zaretskii
2011-10-24 14:30 ` Kevin Pouget
2011-10-24 17:14 ` Eli Zaretskii
2011-10-24 15:31 ` Kevin Pouget
2011-10-24 16:27 ` Phil Muldoon
2011-10-25 11:05 ` Kevin Pouget
2011-10-25 11:37 ` Phil Muldoon
2011-10-25 12:22 ` Kevin Pouget
2011-10-28 8:33 ` Kevin Pouget
2011-10-28 20:51 ` Tom Tromey
2011-11-02 14:44 ` Kevin Pouget
2011-11-04 14:25 ` Kevin Pouget
2011-11-04 21:04 ` Tom Tromey
2011-11-09 14:10 ` Kevin Pouget
2011-11-16 10:53 ` Kevin Pouget
2011-11-17 17:49 ` Tom Tromey
2011-11-17 17:48 ` Tom Tromey
[not found] ` <CAPftXUJwtGJhqFyfX6LVK87QH2xeLkvv5kx=yaEnYJMv0YR_rw@mail.gmail.com>
2011-11-24 8:27 ` Kevin Pouget
2011-11-30 16:02 ` Kevin Pouget
2011-12-02 21:49 ` Tom Tromey
2011-12-05 9:29 ` Kevin Pouget
2011-12-06 21:18 ` Tom Tromey
2011-12-07 13:35 ` Kevin Pouget
2011-12-08 15:30 ` Tom Tromey
2011-12-08 16:10 ` Kevin Pouget
2011-12-08 18:08 ` Kevin Pouget
2011-12-09 9:53 ` Kevin Pouget
2011-12-18 19:22 ` Kevin Pouget
2011-12-20 20:55 ` Tom Tromey [this message]
2011-12-20 20:58 ` Kevin Pouget
2011-12-21 7:16 ` Joel Brobecker
2011-12-21 17:13 ` Tom Tromey
[not found] ` <CAPftXUKXh9ekZ2kiwQ=5zbrjst+9VH9-eZk8h+Z-9SpQ1WqdLw@mail.gmail.com>
[not found] ` <CAPftXULQFggY3Nz2byC0fMZA1sg4Nymp3hAhe8aSuLNG4cauFg@mail.gmail.com>
[not found] ` <CAPftXUJALHd=-fajVwgowqfCDfXO6JMxSkorWD6CQArsg-PedQ@mail.gmail.com>
[not found] ` <CAPftXULKC8gp3L87+PZEF3dj3crv9bh-uzZpRiYKjqEw_xyptQ@mail.gmail.com>
2011-12-27 4:18 ` Joel Brobecker
2011-12-27 9:40 ` Kevin Pouget
2011-12-27 12:22 ` Joel Brobecker
2011-12-27 9:34 ` Kevin Pouget
2011-12-24 23:56 ` [patch] Fix gdb.python/py-finish-breakpoint.exp new FAIL on x86_64-m32 [Re: [RFC] Python Finish Breakpoints] Jan Kratochvil
2011-12-27 11:13 ` Kevin Pouget
2011-12-27 21:39 ` [commit] " Jan Kratochvil
2012-01-04 17:45 ` Ulrich Weigand
2012-01-04 17:58 ` [commit 7.4] " Jan Kratochvil
2012-01-04 18:10 ` Ulrich Weigand
2011-12-26 11:28 ` [patch] Fix remote.c crash on gdbserver close (+fix py-finish-breakpoint.exp for gdbserver) " Jan Kratochvil
2011-12-27 23:30 ` [patch] Fix remote.c crash on gdbserver close (+fix py-finish-breakpoint.exp for gdbserver) [rediff] Jan Kratochvil
2012-01-02 17:57 ` Tom Tromey
2012-01-02 19:49 ` Pedro Alves
2012-01-19 16:24 ` Call target_close after unpushing, not before (was: Re: [patch] Fix remote.c crash on gdbserver close (+fix py-finish-breakpoint.exp for gdbserver)) Pedro Alves
2012-01-19 16:27 ` Jan Kratochvil
2012-01-19 16:37 ` Call target_close after unpushing, not before Pedro Alves
2012-01-19 16:53 ` [commit] Re: Call target_close after unpushing, not before (was: Re: [patch] Fix remote.c crash on gdbserver close (+fix py-finish-breakpoint.exp for gdbserver)) Jan Kratochvil
2012-01-04 14:49 ` [RFC] Python Finish Breakpoints Ulrich Weigand
2012-01-04 15:24 ` Kevin Pouget
2012-01-04 16:29 ` Ulrich Weigand
2012-01-04 16:42 ` Tom Tromey
2012-01-04 16:40 ` Tom Tromey
2012-01-04 17:13 ` Ulrich Weigand
2012-01-09 9:21 ` Kevin Pouget
2012-01-27 17:01 ` Kevin Pouget
2011-10-28 19:26 ` Tom Tromey
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=m34nwvges0.fsf@fleche.redhat.com \
--to=tromey@redhat.com \
--cc=gdb-patches@sourceware.org \
--cc=kevin.pouget@gmail.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox