From: "Rob Quill" <rob.quill@gmail.com>
To: "Rob Quill" <rob.quill@gmail.com>, gdb-patches@sourceware.org
Subject: Re: Remove deprecated_set_value_type (part 1)
Date: Wed, 30 Jan 2008 12:06:00 -0000 [thread overview]
Message-ID: <baf6008d0801300338n119405c1x9d6507001ea4e945@mail.gmail.com> (raw)
In-Reply-To: <20080129195506.GE9019@caradoc.them.org>
On 29/01/2008, Daniel Jacobowitz <drow@false.org> wrote:
> I can't tell if this one is right. I don't understand what it's for
> either. Mind leaving it out for now?
>
No problem, I've taken it out now. Thanks for you help with this and
sorry about the formatting mistakes. I've attached the new patch,
which shows no regressions, below.
Rob
2008-01-30 Rob Quill <rob.quill@gmail.com>
Removes some uses of deprecated_set_value_type
* ada-lang.c (ada_coerce_to_simple_array_type): Create a new zero
value of the correct type instead of changing type.
(ada_value_assign): Call copy_value_and_change_type instead.
* c-valprint.c (c_value_print): Call copy_value_and_change_type.
* printcmd.c (printf_command): Create a zero value of the
correct type and copy the contents of the old value into it.
* valops.c (value_cast_pointers, value_cast, value_assign,
value_addr): Call value_value_copy_and_change_type instead
of copying the value and then changing the type.
* value.c (value_copy_and_change_type): Define.
* value.h (value_copy_and_change_type): Declare.
Index: gdb/ada-lang.c
===================================================================
RCS file: /cvs/src/src/gdb/ada-lang.c,v
retrieving revision 1.131
diff -u -p -r1.131 ada-lang.c
--- gdb/ada-lang.c 8 Jan 2008 19:28:08 -0000 1.131
+++ gdb/ada-lang.c 30 Jan 2008 11:20:33 -0000
@@ -1737,9 +1737,8 @@ struct type *
ada_coerce_to_simple_array_type (struct type *type)
{
struct value *mark = value_mark ();
- struct value *dummy = value_from_longest (builtin_type_long, 0);
+ struct value *dummy = value_zero (type, not_lval);
struct type *result;
- deprecated_set_value_type (dummy, type);
result = ada_type_of_array (dummy, 0);
value_free_to_mark (mark);
return result;
Index: gdb/c-valprint.c
===================================================================
RCS file: /cvs/src/src/gdb/c-valprint.c,v
retrieving revision 1.48
diff -u -p -r1.48 c-valprint.c
--- gdb/c-valprint.c 11 Jan 2008 13:34:14 -0000 1.48
+++ gdb/c-valprint.c 30 Jan 2008 11:20:33 -0000
@@ -562,8 +562,7 @@ c_value_print (struct value *val, struct
* error about a non-pointer type in value_rtti_target_type
*/
struct value *temparg;
- temparg=value_copy(val);
- deprecated_set_value_type (temparg, lookup_pointer_type
(TYPE_TARGET_TYPE(type)));
+ temparg=value_addr (val);
val=temparg;
}
/* Pointer to class, check real type of object */
Index: gdb/printcmd.c
===================================================================
RCS file: /cvs/src/src/gdb/printcmd.c,v
retrieving revision 1.116
diff -u -p -r1.116 printcmd.c
--- gdb/printcmd.c 11 Jan 2008 13:34:14 -0000 1.116
+++ gdb/printcmd.c 30 Jan 2008 11:20:38 -0000
@@ -2035,9 +2035,21 @@ printf_command (char *arg, int from_tty)
{
struct type *type = value_type (val_args[nargs]);
if (TYPE_LENGTH (type) == sizeof (float))
- deprecated_set_value_type (val_args[nargs], builtin_type_float);
+ {
+ struct value *temp = value_zero (builtin_type_float, not_lval);
+ memcpy (value_contents_writeable (temp),
+ value_contents (val_args[nargs]),
+ TYPE_LENGTH (builtin_type_float));
+ val_args[nargs] = temp;
+ }
if (TYPE_LENGTH (type) == sizeof (double))
- deprecated_set_value_type (val_args[nargs], builtin_type_double);
+ {
+ struct value *temp = value_zero (builtin_type_double, not_lval);
+ memcpy (value_contents_all_raw (temp),
+ value_contents_all_raw (val_args[nargs]),
+ TYPE_LENGTH (builtin_type_double));
+ val_args[nargs] = temp;
+ }
}
nargs++;
s = s1;
Index: gdb/valops.c
===================================================================
RCS file: /cvs/src/src/gdb/valops.c,v
retrieving revision 1.181
diff -u -p -r1.181 valops.c
--- gdb/valops.c 7 Jan 2008 22:33:57 -0000 1.181
+++ gdb/valops.c 30 Jan 2008 11:20:41 -0000
@@ -250,8 +250,7 @@ value_cast_pointers (struct type *type,
}
/* No superclass found, just change the pointer type. */
- arg2 = value_copy (arg2);
- deprecated_set_value_type (arg2, type);
+ arg2 = value_copy_and_change_type (arg2, type);
arg2 = value_change_enclosing_type (arg2, type);
set_value_pointed_to_offset (arg2, 0); /* pai: chk_val */
return arg2;
@@ -440,8 +439,7 @@ value_cast (struct type *type, struct va
if (code1 == TYPE_CODE_PTR && code2 == TYPE_CODE_PTR)
return value_cast_pointers (type, arg2);
- arg2 = value_copy (arg2);
- deprecated_set_value_type (arg2, type);
+ arg2 = value_copy_and_change_type (arg2, type);
arg2 = value_change_enclosing_type (arg2, type);
set_value_pointed_to_offset (arg2, 0); /* pai: chk_val */
return arg2;
@@ -754,10 +752,9 @@ value_assign (struct value *toval, struc
fromval = value_from_longest (type, fieldval);
}
- val = value_copy (toval);
+ val = value_copy_and_change_type(toval, type);
memcpy (value_contents_raw (val), value_contents (fromval),
TYPE_LENGTH (type));
- deprecated_set_value_type (val, type);
val = value_change_enclosing_type (val,
value_enclosing_type (fromval));
set_value_embedded_offset (val, value_embedded_offset (fromval));
@@ -884,9 +881,8 @@ value_addr (struct value *arg1)
/* Copy the value, but change the type from (T&) to (T*). We
keep the same location information, which is efficient, and
allows &(&X) to get the location containing the reference. */
- arg2 = value_copy (arg1);
- deprecated_set_value_type (arg2,
- lookup_pointer_type (TYPE_TARGET_TYPE (type)));
+ arg2 = value_copy_and_change_type (arg1,
+ lookup_pointer_type (TYPE_TARGET_TYPE (type)));
return arg2;
}
if (TYPE_CODE (type) == TYPE_CODE_FUNC)
Index: gdb/value.c
===================================================================
RCS file: /cvs/src/src/gdb/value.c,v
retrieving revision 1.56
diff -u -p -r1.56 value.c
--- gdb/value.c 16 Jan 2008 16:16:44 -0000 1.56
+++ gdb/value.c 30 Jan 2008 11:20:42 -0000
@@ -275,6 +275,15 @@ deprecated_set_value_type (struct value
value->type = type;
}
+struct value *
+value_copy_and_change_type (struct value *arg, struct type *type)
+{
+ struct value *val = value_copy (arg);
+ val->type = type;
+
+ return val;
+}
+
int
value_offset (struct value *value)
{
Index: gdb/value.h
===================================================================
RCS file: /cvs/src/src/gdb/value.h,v
retrieving revision 1.107
diff -u -p -r1.107 value.h
--- gdb/value.h 18 Jan 2008 17:07:40 -0000 1.107
+++ gdb/value.h 30 Jan 2008 11:20:43 -0000
@@ -56,6 +56,12 @@ extern struct type *value_type (struct v
extern void deprecated_set_value_type (struct value *value,
struct type *type);
+/* Copy ARG to new value. The new value is exactly the same, except
+ for its type, which is set to TYPE. */
+
+extern struct value *value_copy_and_change_type(struct value *arg,
+ struct type *type);
+
/* Only used for bitfields; number of bits contained in them. */
extern int value_bitsize (struct value *);
next prev parent reply other threads:[~2008-01-30 11:39 UTC|newest]
Thread overview: 8+ messages / expand[flat|nested] mbox.gz Atom feed top
2008-01-21 4:53 Rob Quill
2008-01-29 20:07 ` Daniel Jacobowitz
2008-01-30 12:06 ` Rob Quill [this message]
2008-01-30 18:06 ` Mark Kettenis
2008-02-26 2:24 ` Daniel Jacobowitz
2008-02-26 14:36 ` Rob Quill
2008-07-27 19:16 ` Rob Quill
2008-08-09 15:10 ` Rob Quill
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=baf6008d0801300338n119405c1x9d6507001ea4e945@mail.gmail.com \
--to=rob.quill@gmail.com \
--cc=gdb-patches@sourceware.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox