From: "Maciej W. Rozycki" <macro@orcam.me.uk>
To: gdb-patches@sourceware.org
Cc: Jovan Dmitrovic <jovan.dmitrovic@htecgroup.com>,
Djordje Todorovic <Djordje.Todorovic@htecgroup.com>,
Milica Matic <milica.matic@htecgroup.com>,
"Maciej W. Rozycki" <macro@globalfoundries.com>
Subject: [PATCH v2 08/12] MIPS/testsuite: Verify microMIPS branch stepping
Date: Mon, 17 Aug 2026 17:53:56 +0100 (BST) [thread overview]
Message-ID: <alpine.DEB.2.21.2608162333440.14132@angie.orcam.me.uk> (raw)
In-Reply-To: <alpine.DEB.2.21.2608161728490.14132@angie.orcam.me.uk>
From: Maciej W. Rozycki <macro@globalfoundries.com>
Verify that breakpoints are correctly placed via `micromips_next_pc'
while single-stepping through branches specific to the microMIPS ASE.
Approved-By: Maciej W. Rozycki <macro@orcam.me.uk>
---
New change in v2.
---
gdb/testsuite/gdb.arch/micromips-branch.c | 78 ++++++++++++++++++++++++++++
gdb/testsuite/gdb.arch/micromips-branch.exp | 30 ++++++++++
gdb/testsuite/gdb.arch/mips-allow.exp.tcl | 29 ++++++++++
3 files changed, 137 insertions(+)
gdb-micromips-next-pc-test.diff
Index: binutils-gdb/gdb/testsuite/gdb.arch/micromips-branch.c
===================================================================
--- /dev/null
+++ binutils-gdb/gdb/testsuite/gdb.arch/micromips-branch.c
@@ -0,0 +1,78 @@
+/* This testcase is part of GDB, the GNU debugger.
+
+ Copyright (C) 2026 Free Software Foundation, Inc.
+
+ This program is free software; you can redistribute it and/or modify
+ it under the terms of the GNU General Public License as published by
+ the Free Software Foundation; either version 3 of the License, or
+ (at your option) any later version.
+
+ This program is distributed in the hope that it will be usefu,
+ but WITHOUT ANY WARRANTY; without even the implied warranty of
+ MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ GNU General Public License for more details.
+
+ You should have received a copy of the GNU General Public License
+ along with this program. If not, see <http://www.gnu.org/licenses/>. */
+
+/* Test single-stepping through microMIPS branch instructions. */
+
+int
+test_micromips_branch (void)
+{
+ /* Make 'err' available to the debugger to track the number of single
+ steps executed. Use `volatile' to prevent the variable from being
+ optimized away. */
+ volatile int err = -1;
+
+ int any = 0x55aa;
+ int mone = -1;
+ int zero = 0;
+ int one = 1;
+
+ asm volatile (
+ ".macro b_test op, args:vararg\n\t"
+ "\\op \\args, 0f\n\t"
+ " nop\n"
+ "nop\n"
+ "0:\n\t"
+ ".endm\n\t"
+
+ ".set push\n\t"
+ ".set noreorder\n\t"
+ ".globl step_start\n\t"
+ ".type step_start, @function\n"
+ "step_start:\n\t" /* Units: steps. */
+ "nop\n\t" /* NOP: 1s */
+ "b_test beqz16 %[zero]\n\t" /* Taken: 1s */
+ "b_test beqz16 %[any]\n\t" /* Not taken: 2s */
+ "b_test beqzc %[zero]\n\t" /* Taken: 1s */
+ "b_test beqzc %[any]\n\t" /* Not taken: 3s */
+ "b_test bnez16 %[zero]\n\t" /* Not taken: 2s */
+ "b_test bnez16 %[any]\n\t" /* Taken: 1s */
+ "b_test bnezc %[zero]\n\t" /* Not taken: 3s */
+ "b_test bnezc %[any]\n\t" /* Taken: 1s */
+ "b_test bltzals, %[mone]\n\t" /* Taken: 1s */
+ "b_test bltzals, %[zero]\n\t" /* Not taken: 2s */
+ "b_test bltzals, %[one]\n\t" /* Not taken: 2s */
+ "b_test bgezals, %[mone]\n\t" /* Not taken: 2s */
+ "b_test bgezals, %[zero]\n\t" /* Taken: 1s */
+ "b_test bgezals, %[one]\n\t" /* Taken: 1s */
+ "nop\n\t" /* NOP: 1s */
+ ".globl step_stop\n\t" /* Total: 25s */
+ ".type step_stop, @function\n"
+ "step_stop:\n\t"
+ ".set pop\n"
+ :
+ : [mone] "r" (mone), [zero] "r" (zero), [one] "r" (one),
+ [any] "r" (any)
+ : "$31");
+
+ return err;
+}
+
+int
+main (void)
+{
+ return test_micromips_branch ();
+}
Index: binutils-gdb/gdb/testsuite/gdb.arch/micromips-branch.exp
===================================================================
--- /dev/null
+++ binutils-gdb/gdb/testsuite/gdb.arch/micromips-branch.exp
@@ -0,0 +1,30 @@
+# Copyright (C) 2026 Free Software Foundation, Inc.
+
+# This program is free software; you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation; either version 3 of the License, or
+# (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program. If not, see <http://www.gnu.org/licenses/>.
+
+# Test single-stepping through microMIPS branch instructions.
+
+require {istarget "mips*-*-*"}
+
+source $srcdir/$subdir/mips-allow.exp.tcl
+
+require allow_micromips_ase_tests
+
+standard_testfile
+
+set steps 25
+foreach flag {-Wa,-W -mno-mips16 -mmicromips -minterlink-compressed} {
+ lappend compile_flags "additional_flags=$flag"
+}
+source $srcdir/$subdir/mips-stepi.exp.tcl
Index: binutils-gdb/gdb/testsuite/gdb.arch/mips-allow.exp.tcl
===================================================================
--- binutils-gdb.orig/gdb/testsuite/gdb.arch/mips-allow.exp.tcl
+++ binutils-gdb/gdb/testsuite/gdb.arch/mips-allow.exp.tcl
@@ -124,3 +124,32 @@ proc allow_mips16_ase_tests {} {
} \
{-Wa,-fatal-warnings -mno-micromips -mips16 -minterlink-compressed}]
}
+
+# Check for microMIPS ASE support. These instructions may be absent,
+# such as with MIPS16 compilations. Make sure an actual JRADDIUSP
+# machine instruction is produced and no macro expanded such as with
+# `-Wa,-minsn32'.
+proc allow_micromips_ase_tests {} {
+ return [allow_target_tests "allow_micromips_ase_tests" \
+ "microMIPS instruction support" "(:?Bus error|Illegal instruction)" \
+ {
+ int main() {
+ extern const char jr asm("jr");
+ register char *ra asm("$31") = &jr;
+
+ asm volatile (
+ ".set push\n\t"
+ ".set noreorder\n\t"
+ ".set nomacro\n\t"
+ "jraddiusp 0\n\t"
+ ".globl jr\n\t"
+ ".type jr, @function\n"
+ "jr:\n\t"
+ ".set pop\n"
+ :
+ : "r" (ra));
+ return 0;
+ }
+ } \
+ {-Wa,-fatal-warnings -mno-mips16 -mmicromips -minterlink-compressed}]
+}
next prev parent reply other threads:[~2026-08-17 16:54 UTC|newest]
Thread overview: 13+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-08-17 16:53 [PATCH v2 00/12] MIPS+testsuite: BLEZL stepping fix and associated test infrastructure Maciej W. Rozycki
2026-08-17 16:53 ` [PATCH v2 01/12] testsuite: Factor out target feature test template Maciej W. Rozycki
2026-08-17 16:53 ` [PATCH v2 02/12] PowerPC/testsuite: Reduce feature tests in terms of `allow_target_tests' Maciej W. Rozycki
2026-08-17 16:53 ` [PATCH v2 03/12] MIPS/testsuite: Verify MIPS I CPU branch stepping Maciej W. Rozycki
2026-08-17 16:53 ` [PATCH v2 04/12] MIPS: Correct BLEZL single-stepping Maciej W. Rozycki
2026-08-17 16:53 ` [PATCH v2 05/12] MIPS/testsuite: Verify MIPS II CPU branch stepping Maciej W. Rozycki
2026-08-17 16:53 ` [PATCH v2 06/12] MIPS/testsuite: Verify MIPS DSP ASE " Maciej W. Rozycki
2026-08-17 16:53 ` [PATCH v2 07/12] MIPS/testsuite: Verify MIPS16 " Maciej W. Rozycki
2026-08-17 16:53 ` Maciej W. Rozycki [this message]
2026-08-17 16:54 ` [PATCH v2 09/12] MIPS: Reorder a reference to "BGTZ, BGTZL" in `mips32_next_pc' Maciej W. Rozycki
2026-08-17 16:54 ` [PATCH v2 10/12] MIPS: Correct segment calculation for MIPS16 JAL/X Maciej W. Rozycki
2026-08-17 16:54 ` [PATCH v2 11/12] MIPS: Return correct size from `mips_insn_size' " Maciej W. Rozycki
2026-08-17 16:54 ` [PATCH v2 12/12] MIPS: Fix stepping through instructions branching to own delay slot Maciej W. Rozycki
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=alpine.DEB.2.21.2608162333440.14132@angie.orcam.me.uk \
--to=macro@orcam.me.uk \
--cc=Djordje.Todorovic@htecgroup.com \
--cc=gdb-patches@sourceware.org \
--cc=jovan.dmitrovic@htecgroup.com \
--cc=macro@globalfoundries.com \
--cc=milica.matic@htecgroup.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox