Re: [PATCH] Add CTF support to GDB [5] Add test for CTF function

[Hui Zhu <teawater@gmail.com>]

[-- Attachment #1: Type: text/plain, Size: 1904 bytes --]

On Wed, Jan 16, 2013 at 5:52 PM, Yao Qi <yao@codesourcery.com> wrote:
> On 01/16/2013 03:38 PM, Hui Zhu wrote:
>>
>> make check RUNTESTFLAGS="--target_board=native-gdbserver ctf.exp"
>> remote_exec host "babeltrace $ctfdir < /dev/null" "" ""  "output" will
>> get error.  I think that is why gas_version have "if [is_remote host]"
>> for that.
>
>
> What is the error?  'remote_exec host' has been used in some places in gdb
> testsuite so it should work well.  The one-line statement below works with
> combinations of {remote-host, local-host} x {babeltrace installed,
> babeltrace not installed}

ERROR: tcl error sourcing ../../../gdb/gdb/testsuite/gdb.trace/ctf.exp.
ERROR: bad spawn_id (process died earlier?)

This is what I got.

>
>   set ctfdir "foo"
>   set status [remote_exec host "babeltrace $ctfdir < /dev/null"]
>   verbose -log "status\[0\] ([lindex $status 0])"
>   verbose -log "status\[1\] ([lindex $status 1])"
>
> 1) babeltrace installed (local-host and remote-host).  We'll get,
> status[0] (1)
> status[1] ([error] opening trace "foo" for reading.
>
> 2) babeltrace not installed, local-host.  We'll get,
> status[0] (-1)
> status[1] (spawn failed)
>
> 3) babeltrace not installed, remote-host.  We'll get,
> status[0] (1)
> status[1] (sh: babeltrace: command not found)
>
> We can match 'status[1]' to know the different results of executing
> 'babeltrace' on host.
>
> P.S.  I am not good at tcl/expect, so I may miss something.

Thanks.  I am very clear about this way.  Do you mind I keep current
way that I just used?

>
> --
> Yao (齐尧)


According to the reveiw from Abid.  I found that we need a test for
while-stepping.  So I add test for that.

Thanks,
Hui

2013-01-18  Hui Zhu  <hui_zhu@mentor.com>

	* gdb.trace/Makefile.in (PROGS): Add ctf.
	* gdb.trace/ctf.c: New file.
	* gdb.trace/ctf.exp: New file.

[-- Attachment #2: ctf-test.txt --]
[-- Type: text/plain, Size: 7982 bytes --]

--- a/testsuite/gdb.trace/Makefile.in
+++ b/testsuite/gdb.trace/Makefile.in
@@ -3,7 +3,7 @@ srcdir = @srcdir@
 
 .PHONY: all clean mostlyclean distclean realclean
 
-PROGS = ax backtrace deltrace disconnected-tracing infotrace packetlen \
+PROGS = ax backtrace ctf deltrace disconnected-tracing infotrace packetlen \
 	passc-dyn passcount report save-trace tfile tfind tracecmd tsv \
 	unavailable while-dyn while-stepping
 
--- /dev/null
+++ b/testsuite/gdb.trace/ctf.c
@@ -0,0 +1,48 @@
+/* CTF test program.
+
+   Copyright (C) 2013 Free Software Foundation, Inc.
+
+   This file is part of GDB.
+
+   This program is free software; you can redistribute it and/or modify
+   it under the terms of the GNU General Public License as published by
+   the Free Software Foundation; either version 3 of the License, or
+   (at your option) any later version.
+
+   This program is distributed in the hope that it will be useful,
+   but WITHOUT ANY WARRANTY; without even the implied warranty of
+   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+   GNU General Public License for more details.
+
+   You should have received a copy of the GNU General Public License
+   along with this program.  If not, see <http://www.gnu.org/licenses/>.  */
+
+typedef char test_t1;
+typedef test_t1 test_t2;
+typedef test_t2 test_t3;
+
+int
+main ()
+{
+  int i;
+  int a = 0;
+  test_t3 b = 1;
+  test_t3 c[][4] = {"123", "456", "789", "123", "456", "789"};
+  struct
+    {
+      int a;
+      int b;
+    } d[2][2] = {{{1, 2}, {3, 4}}, {{5, 6}, {7, 8}}};
+
+  for (i = 0; i < 10; i++)
+    {
+      ++a;  /* set tracepoint 1 here */
+      ++b;  /* set tracepoint 2 here */
+      ++c[0][1];
+      ++d[0][1].a;
+    }
+
+  /* set breakpoint end here */
+
+  return 0;
+}
--- /dev/null
+++ b/testsuite/gdb.trace/ctf.exp
@@ -0,0 +1,173 @@
+#   Copyright 2013 Free Software Foundation, Inc.
+#
+# This program is free software; you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation; either version 3 of the License, or
+# (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program.  If not, see <http://www.gnu.org/licenses/>.
+
+load_lib "trace-support.exp";
+
+proc file_contents { filename } {
+    set file [open $filename r]
+    set contents [read $file]
+    close $file
+    return $contents
+}
+
+standard_testfile
+set executable $testfile
+set expfile $testfile.exp
+set ctfdir $testfile.ctf
+
+if [prepare_for_testing $expfile $executable $srcfile \
+        {debug nowarnings}] {
+    untested "failed to prepare for trace tests"
+    return -1
+}
+
+if ![runto_main] {
+    fail "can't run to main to check for trace support"
+    return -1
+}
+
+if ![gdb_target_supports_trace] {
+    unsupported "target does not support trace"
+    return -1;
+}
+
+
+#Test "tsave -ctf"
+
+set trace_location1 [gdb_get_line_number "set tracepoint 1 here"]
+gdb_test "trace $trace_location1" "Tracepoint ${decimal} at .*"
+gdb_trace_setactions "set action for line $trace_location1" "" \
+	"collect \$local" "^$" \
+	"while-stepping 1" "^$" \
+	"collect \$local" "^$" \
+	"end" "^$" \
+	"end" ""
+
+set trace_location2 [gdb_get_line_number "set tracepoint 2 here"]
+gdb_test "trace $trace_location2" "Tracepoint ${decimal} at .*"
+gdb_trace_setactions "set action for line $trace_location2" "" \
+	"collect \$reg" "^$" \
+	"while-stepping 1" "^$" \
+	"collect \$reg" "^$" \
+	"end" "^$" \
+	"end" ""
+
+gdb_test_no_output "tstart"
+
+set break_end [gdb_get_line_number "set breakpoint end here"]
+gdb_test "break $break_end" "Breakpoint ${decimal} at .*"
+
+gdb_test "continue" "Continuing\\.\[ \r\n\]+Breakpoint.*"
+gdb_test_no_output "tstop"
+
+gdb_test "tsave -ctf $ctfdir" "Trace data saved to directory \'$ctfdir\'."
+
+#Get the pathname of babeltrace and set it to $which_babeltrace.
+#If host doesn't have babeltrace, $which_babeltrace will set to 0.
+if [info exists BABELTRACE] {
+    set which_babeltrace ${BABELTRACE}
+} else {
+    if [is_remote host] then {
+	remote_exec host "which babeltrace" "" "" "babeltrace.which"
+	remote_upload host "babeltrace.which"
+	set which_babeltrace [file_contents "babeltrace.which"]
+	remote_file build delete "babeltrace.which"
+	remote_file host delete "babeltrace.which"
+    } else {
+	set which_babeltrace [which babeltrace]
+    }
+}
+
+#Use $which_babeltrace check $ctfdir.
+if { $which_babeltrace == 0 } then {
+    unsupported "babeltrace check ctf directory"
+} else {
+    #Let babeltrace output an error to make sure current way is right.
+    if [is_remote host] then {
+	remote_exec host "$which_babeltrace not_exist < /dev/null" "" "" "babeltrace.output"
+	remote_upload host "babeltrace.output"
+	set babeltrace_output [file_contents "babeltrace.output"]
+	remote_file build delete "babeltrace.output"
+	remote_file host delete "babeltrace.output"
+    } else {
+	catch "exec $which_babeltrace not_exist < /dev/null" babeltrace_output
+    }
+    if { [string last "\[error\]" $babeltrace_output] == -1 } then {
+	unsupported "cannot handle babeltrace output"
+    } else {
+	if [is_remote host] then {
+	    remote_exec host "$which_babeltrace $ctfdir < /dev/null" "" "" "babeltrace.output"
+	    remote_upload host "babeltrace.output"
+	    set babeltrace_output [file_contents "babeltrace.output"]
+	    remote_file build delete "babeltrace.output"
+	    remote_file host delete "babeltrace.output"
+	} else {
+	    catch "exec $which_babeltrace $ctfdir < /dev/null" babeltrace_output
+	}
+	if { [string last "\[error\]" $babeltrace_output] != -1 } then {
+	    fail "babeltrace open ctf directory"
+	}
+    }
+}
+
+
+#Test "target ctf" with $ctfdir.
+gdb_test_no_output "set confirm off"
+gdb_test_no_output "kill"
+gdb_test_multiple "target ctf $ctfdir" "" {
+    -re "Undefined target command: \"ctf ctf\.ctf\"\.  Try \"help target\"\.\r\n$gdb_prompt $" {
+	unsupported "target does not support ctf"
+	remote_exec host "rm -rf $ctfdir"
+	return -1;
+    }
+    -re ".*fail.*\r\n$gdb_prompt $" {
+	fail "target ctf $ctfdir"
+    }
+    -re "\r\n$gdb_prompt $" {
+        pass "target ctf $ctfdir"
+    }
+}
+
+gdb_test "tfind 0" ".*Found trace frame 0.*" "target ctf tfind 0"
+gdb_test "tdump" ".*b = 1.*a = 0.*i = 0.*" "first target ctf tdump"
+gdb_test "print \$b" ".* = 1.*" "first target ctf print \$b"
+gdb_test "print \$a" ".* = 0.*" "first target ctf print \$a"
+gdb_test "print \$i" ".* = 0.*" "first target ctf print \$i"
+
+gdb_test "tfind 1" ".*Found trace frame 1.*" "target ctf tfind 1"
+gdb_test "tdump" ".*b = 1.*a = 1.*i = 0.*" "second target ctf tdump"
+gdb_test "print \$b" ".* = 1.*" "second target ctf print \$b"
+gdb_test "print \$a" ".* = 1.*" "second target ctf print \$a"
+gdb_test "print \$i" ".* = 0.*" "second target ctf print \$i"
+
+gdb_test "tfind 2" ".*Found trace frame 2.*" "target ctf tfind 2"
+
+gdb_test "tfind 3" ".*Found trace frame 3.*" "target ctf tfind 3"
+
+gdb_test "tfind 4" ".*Found trace frame 4.*" "target ctf tfind 4"
+gdb_test "tdump" ".*b = 2.*a = 1.*i = 1.*" "third target ctf tdump"
+gdb_test "print \$b" ".* = 2.*" "third target ctf print \$b"
+gdb_test "print \$a" ".* = 1.*" "third target ctf print \$a"
+gdb_test "print \$i" ".* = 1.*" "third target ctf print \$i"
+
+gdb_test "tfind 5" ".*Found trace frame 5.*" "target ctf tfind 5"
+gdb_test "tdump" ".*b = 2.*a = 2.*i = 1.*" "fourth target ctf tdump"
+gdb_test "print \$b" ".* = 2.*" "fourth target ctf print \$b"
+gdb_test "print \$a" ".* = 2.*" "fourth target ctf print \$a"
+gdb_test "print \$i" ".* = 1.*" "fourth target ctf print \$i"
+
+#Clean
+
+#remote_exec host "rm -rf $ctfdir"