From: Hui Zhu <teawater@gmail.com>
To: Pedro Alves <palves@redhat.com>
Cc: Hui Zhu <hui_zhu@mentor.com>, Tom Tromey <tromey@redhat.com>,
gdb-patches@sourceware.org
Subject: Re: [PATCH]testsuite: test for disconnected-tracing
Date: Thu, 10 May 2012 15:05:00 -0000 [thread overview]
Message-ID: <CANFwon0UNKq_XGC+NkrGn18JKEPR6T1Hpo52-j=JosuOnUSxKw@mail.gmail.com> (raw)
In-Reply-To: <4FABAD08.5020305@redhat.com>
[-- Attachment #1: Type: text/plain, Size: 2803 bytes --]
On Thu, May 10, 2012 at 7:56 PM, Pedro Alves <palves@redhat.com> wrote:
> On 05/10/2012 05:18 AM, Hui Zhu wrote:
>
>> On 04/11/12 13:44, Hui Zhu wrote:
>>> On 04/05/12 19:50, Pedro Alves wrote:
>>>> On 04/05/2012 09:14 AM, Hui Zhu wrote:
>>>>
>>>>> I post a new version patch according to your comments.
>>>>> And I have test it with gdb-7.4 and got fail.
>>>>
>>>>
>>>> Thanks. Only a few nits remain, and this is technically ready to
>>>> check in. See below.
>>>>
>>>> However, what's the status of your copyright assignment? Last I
>>>> heard (and from what I see in FSF's copyright assignment records), we
>>>> still can't accept changes from you on behalf of Mentor. :-(
>>>
>>> What I got is it is OK now. I will send you a mail and cc the people that about the law.
>>
>> Hi Pedro,
>>
>> The copyright issue is OK now.
>
>
> Yep, took a while, but it's sorted now. Thanks for your patience.
>
>> Do you think I can check in this patch?
>
>
> I took another look at the patch, and I now notice you didn't address
> some of my early comments in <http://sourceware.org/ml/gdb-patches/2012-03/msg00987.html>:
>
>> Please always look at the resulting messages in gdb.sum:
> ..
>> There are duplicate messages here. See
>> <http://sourceware.org/gdb/wiki/GDBTestcaseCookbook#Make_sure_test_messages_are_unique>.
>>
>> I'd lowercase the "First", etc., in the test messages. It's much more common.
>
> This is what I get now:
>
>>cat testsuite/gdb.sum| grep PASS | sort | uniq -c | sort -nr
> 2 PASS: gdb.trace/disconnected-tracing.exp: reconnect after unload
> 2 PASS: gdb.trace/disconnected-tracing.exp: disconnect
> 1 PASS: gdb.trace/disconnected-tracing.exp: tstart
> 1 PASS: gdb.trace/disconnected-tracing.exp: trace main
> 1 PASS: gdb.trace/disconnected-tracing.exp: Third info tracepoints
> 1 PASS: gdb.trace/disconnected-tracing.exp: set disconnected-tracing on
> 1 PASS: gdb.trace/disconnected-tracing.exp: set confirm off
> 1 PASS: gdb.trace/disconnected-tracing.exp: Second info tracepoints
> 1 PASS: gdb.trace/disconnected-tracing.exp: Fourth info tracepoints
> 1 PASS: gdb.trace/disconnected-tracing.exp: First info tracepoints
>
> Yao also made a valid comment here:
>
> <http://sourceware.org/ml/gdb-patches/2012-04/msg00124.html>
>
> that doesn't appear to have been addressed.
>
> --
> Pedro Alves
Hi Pedro,
I post a new version that lowercase the pass info and update
Makefile.in according to Yao's comments. Please help me review it.
Thanks,
Hui
2012-05-10 Hui Zhu <hui_zhu@mentor.com>
* gdb.trace/Makefile.in (PROGS): Add disconnected-tracing.
* gdb.trace/disconnected-tracing.c: New file.
* gdb.trace/disconnected-tracing.exp: New file.
[-- Attachment #2: disconnected-tracing.txt --]
[-- Type: text/plain, Size: 4103 bytes --]
---
testsuite/gdb.trace/Makefile.in | 6 +-
testsuite/gdb.trace/disconnected-tracing.c | 21 +++++++
testsuite/gdb.trace/disconnected-tracing.exp | 76 +++++++++++++++++++++++++++
3 files changed, 100 insertions(+), 3 deletions(-)
--- a/testsuite/gdb.trace/Makefile.in
+++ b/testsuite/gdb.trace/Makefile.in
@@ -3,9 +3,9 @@ srcdir = @srcdir@
.PHONY: all clean mostlyclean distclean realclean
-PROGS = ax backtrace deltrace infotrace packetlen passc-dyn passcount \
- report save-trace tfile tfind tracecmd tsv unavailable while-dyn \
- while-stepping
+PROGS = ax backtrace deltrace disconnected-tracing infotrace packetlen \
+ passc-dyn passcount report save-trace tfile tfind tracecmd tsv \
+ unavailable while-dyn while-stepping
all info install-info dvi install uninstall installcheck check:
@echo "Nothing to be done for $@..."
--- /dev/null
+++ b/testsuite/gdb.trace/disconnected-tracing.c
@@ -0,0 +1,21 @@
+/* This testcase is part of GDB, the GNU debugger.
+
+ Copyright 2012 Free Software Foundation, Inc.
+
+ This program is free software; you can redistribute it and/or modify
+ it under the terms of the GNU General Public License as published by
+ the Free Software Foundation; either version 3 of the License, or
+ (at your option) any later version.
+
+ This program is distributed in the hope that it will be useful,
+ but WITHOUT ANY WARRANTY; without even the implied warranty of
+ MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ GNU General Public License for more details.
+
+ You should have received a copy of the GNU General Public License
+ along with this program. If not, see <http://www.gnu.org/licenses/>. */
+
+int main ()
+{
+ return 0;
+}
--- /dev/null
+++ b/testsuite/gdb.trace/disconnected-tracing.exp
@@ -0,0 +1,76 @@
+# Copyright 2012 Free Software Foundation, Inc.
+#
+# This program is free software; you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation; either version 3 of the License, or
+# (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program. If not, see <http://www.gnu.org/licenses/>.
+
+# Test of disconnected-tracing.
+
+load_lib "trace-support.exp";
+
+set testfile "disconnected-tracing"
+set executable $testfile
+set srcfile ${testfile}.c
+set binfile $objdir/$subdir/$testfile
+set expfile $testfile.exp
+set gdbserver_reconnect_p 1
+
+if { [info proc gdb_reconnect] == "" } {
+ unsupported "target does not support reconnect"
+ return -1
+}
+
+if [prepare_for_testing $expfile $executable $srcfile \
+ {debug nowarnings}] {
+ untested "failed to prepare for trace tests"
+ return -1
+}
+
+if ![runto_main] {
+ fail "can't run to main to check for trace support"
+ return -1
+}
+
+if ![gdb_target_supports_trace] {
+ unsupported "target does not support trace"
+ return -1;
+}
+
+delete_breakpoints
+gdb_test_no_output "set confirm off"
+gdb_test_no_output "set disconnected-tracing on"
+gdb_test "trace main" ".*"
+gdb_test_no_output "tstart"
+
+gdb_test "info tracepoints" ".*in main at.*" "first info tracepoints"
+
+gdb_test "disconnect" "Ending remote debugging\\."
+if { [gdb_reconnect] == 0 } {
+ pass "reconnect after unload"
+} else {
+ fail "reconnect after unload"
+ return 0
+}
+gdb_test "info tracepoints" ".*in main at.*" "second info tracepoints"
+
+delete_breakpoints
+gdb_test "info tracepoints" ".*No tracepoints..*" "third info tracepoints"
+
+gdb_test "disconnect" "Ending remote debugging\\."
+if { [gdb_reconnect] == 0 } {
+ pass "reconnect after unload"
+} else {
+ fail "reconnect after unload"
+ return 0
+}
+gdb_test "info tracepoints" ".*in main at.*" "fourth info tracepoints"
+
next prev parent reply other threads:[~2012-05-10 15:05 UTC|newest]
Thread overview: 15+ messages / expand[flat|nested] mbox.gz Atom feed top
2012-03-27 14:00 Hui Zhu
2012-03-28 18:51 ` Tom Tromey
2012-03-29 1:17 ` Hui Zhu
2012-03-29 11:37 ` Pedro Alves
2012-04-05 8:14 ` Hui Zhu
2012-04-05 11:51 ` Pedro Alves
2012-04-11 5:58 ` Hui Zhu
2012-05-10 4:19 ` Hui Zhu
2012-05-10 11:57 ` Pedro Alves
2012-05-10 15:05 ` Hui Zhu [this message]
2012-05-10 15:10 ` Pedro Alves
2012-05-11 0:59 ` Hui Zhu
2012-05-11 10:45 ` Pedro Alves
2012-05-14 2:25 ` Hui Zhu
2012-04-08 7:59 ` Yao Qi
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to='CANFwon0UNKq_XGC+NkrGn18JKEPR6T1Hpo52-j=JosuOnUSxKw@mail.gmail.com' \
--to=teawater@gmail.com \
--cc=gdb-patches@sourceware.org \
--cc=hui_zhu@mentor.com \
--cc=palves@redhat.com \
--cc=tromey@redhat.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox