[PATCH v3] Exit code of exited inferiors in -list-thread-groups

[PATCH v3] Exit code of exited inferiors in -list-thread-groups

[Simon Marchi]

Here is a new version of my patch to show the exit code of exited 
inferiors in -list-thread-groups. I made changes following Pedro's 
comments at:
http://sourceware.org/ml/gdb-patches/2013-06/msg00126.html

This patch depends on this one (fixes to mi test suite):
http://sourceware.org/ml/gdb-patches/2013-06/msg00374.html

gdb/ChangeLog:
2013-06-17  Simon Marchi <simon.marchi@ericsson.com>

	* NEWS: Announce new exit-code field.
	* inferior.c (exit_inferior_1): Don't clear exit code.
	(inferior_appeared): Clear exit code.
	* mi/mi-main.c (print_one_inferior): Add printing of the exit
	code.

gdb/testsuite/ChangeLog:
2013-06-17  Simon Marchi <simon.marchi@ericsson.com>

	* gdb.mi/mi-exit-code.exp: New file.
	* gdb.mi/mi-exit-code.c: New file.

gdb/doc/ChangeLog:
2013-06-17  Simon Marchi <simon.marchi@ericsson.com>

	* gdb.texinfo: Document new exit-code field.
---
  gdb/NEWS                              |  3 ++
  gdb/doc/gdb.texinfo                   |  5 +++
  gdb/inferior.c                        |  4 +-
  gdb/mi/mi-main.c                      |  3 ++
  gdb/testsuite/gdb.mi/mi-exit-code.c   | 29 ++++++++++++++
  gdb/testsuite/gdb.mi/mi-exit-code.exp | 71 
+++++++++++++++++++++++++++++++++++
  6 files changed, 113 insertions(+), 2 deletions(-)
  create mode 100644 gdb/testsuite/gdb.mi/mi-exit-code.c
  create mode 100644 gdb/testsuite/gdb.mi/mi-exit-code.exp

diff --git a/gdb/NEWS b/gdb/NEWS
index eea9917..8bd095a 100644
--- a/gdb/NEWS
+++ b/gdb/NEWS
@@ -76,6 +76,9 @@ show range-stepping

    ** The new command -dprintf-insert sets a dynamic printf breakpoint.

+  ** The -list-thread-groups command outputs an exit-code field for
+     inferiors that have exited.
+
  * New system-wide configuration scripts
    A GDB installation now provides scripts suitable for use as system-wide
    configuration scripts for the following systems:
diff --git a/gdb/doc/gdb.texinfo b/gdb/doc/gdb.texinfo
index e6ec4ff..1b4bc7e 100644
--- a/gdb/doc/gdb.texinfo
+++ b/gdb/doc/gdb.texinfo
@@ -34513,6 +34513,11 @@ valid type.
  The target-specific process identifier.  This field is only present
  for thread groups of type @samp{process} and only if the process exists.

+@item exit-code
+The exit code of this thread group when it last exited.  This field is
+only present for thread groups of type @samp{process} and only if the
+process is not running.
+
  @item num_children
  The number of children this thread group has.  This field may be
  absent for an available thread group.
diff --git a/gdb/inferior.c b/gdb/inferior.c
index b9e9a8d..3f111aa 100644
--- a/gdb/inferior.c
+++ b/gdb/inferior.c
@@ -276,8 +276,6 @@ exit_inferior_1 (struct inferior *inftoex, int silent)
        inf->vfork_child = NULL;
      }

-  inf->has_exit_code = 0;
-  inf->exit_code = 0;
    inf->pending_detach = 0;
  }

@@ -323,6 +321,8 @@ void
  inferior_appeared (struct inferior *inf, int pid)
  {
    inf->pid = pid;
+  inf->has_exit_code = 0;
+  inf->exit_code = 0;

    observer_notify_inferior_appeared (inf);
  }
diff --git a/gdb/mi/mi-main.c b/gdb/mi/mi-main.c
index 956fc5c..0a10930 100644
--- a/gdb/mi/mi-main.c
+++ b/gdb/mi/mi-main.c
@@ -571,6 +571,9 @@ print_one_inferior (struct inferior *inferior, void 
*xdata)

        ui_out_field_fmt (uiout, "id", "i%d", inferior->num);
        ui_out_field_string (uiout, "type", "process");
+      if (inferior->has_exit_code)
+	ui_out_field_string (uiout, "exit-code",
+			     int_string (inferior->exit_code, 8, 0, 0, 1));
        if (inferior->pid != 0)
  	ui_out_field_int (uiout, "pid", inferior->pid);

diff --git a/gdb/testsuite/gdb.mi/mi-exit-code.c 
b/gdb/testsuite/gdb.mi/mi-exit-code.c
new file mode 100644
index 0000000..a523385
--- /dev/null
+++ b/gdb/testsuite/gdb.mi/mi-exit-code.c
@@ -0,0 +1,29 @@
+/* Copyright 1999-2013 Free Software Foundation, Inc.
+
+   This file is part of GDB.
+
+   This program is free software; you can redistribute it and/or modify
+   it under the terms of the GNU General Public License as published by
+   the Free Software Foundation; either version 3 of the License, or
+   (at your option) any later version.
+
+   This program is distributed in the hope that it will be useful,
+   but WITHOUT ANY WARRANTY; without even the implied warranty of
+   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+   GNU General Public License for more details.
+
+   You should have received a copy of the GNU General Public License
+   along with this program.  If not, see 
<http://www.gnu.org/licenses/>.  */
+
+int exit_code = 0;
+
+int
+main(int argc, char **argv)
+{
+  if (argc > 1)
+    {
+      exit_code = atoi (argv[1]);
+    }
+
+  return exit_code;
+}
diff --git a/gdb/testsuite/gdb.mi/mi-exit-code.exp 
b/gdb/testsuite/gdb.mi/mi-exit-code.exp
new file mode 100644
index 0000000..50d8530
--- /dev/null
+++ b/gdb/testsuite/gdb.mi/mi-exit-code.exp
@@ -0,0 +1,71 @@
+# Copyright 1999-2013 Free Software Foundation, Inc.
+
+# This program is free software; you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation; either version 3 of the License, or
+# (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program.  If not, see <http://www.gnu.org/licenses/>.
+
+load_lib mi-support.exp
+set MIFLAGS "-i=mi"
+
+gdb_exit
+if [mi_gdb_start] {
+    continue
+}
+
+standard_testfile
+
+if { [gdb_compile "${srcdir}/${subdir}/${srcfile}" "${binfile}" 
executable {debug}] != "" } {
+
+    untested mi-exit-code.exp
+    return -1
+}
+
+proc test_list_thread_groups { } {
+    global hex
+    global decimal
+
+    # Check before any run, exit-code should not be present.
+    mi_gdb_test "122-list-thread-groups" 
"122\\^done,groups=\\\[\{id=\"i1\",type=\"process\"\}\]" 
"-list-thread-groups before any run"
+
+    mi_run_to_main
+
+    # Check during the run, exit-code should not be present.
+    mi_gdb_test "123-list-thread-groups" 
"123\\^done,groups=\\\[\{id=\"i1\",type=\"process\",pid=\"$decimal\",executable=\".*\".*" 
"-list-thread-groups during first run"
+
+    # Exit the inferior.
+    mi_send_resuming_command "exec-continue" "continuing to exit 
inferior (first run)"
+    mi_expect_stop "exited-normally" "" "" "" "" "" "exiting inferior 
(first run)"
+
+    # Check after the run, exit-code should be present.
+    mi_gdb_test "124-list-thread-groups" 
"124\\^done,groups=\\\[\{id=\"i1\",type=\"process\",exit-code=\"0\",executable=\".*\"\}\]" 
"-list-thread-groups after first run"
+
+    mi_run_to_main
+
+    # Write the exit code we want in the global var
+    mi_gdb_test "-data-write-memory-bytes &exit_code 08"
+
+    # Check during the second run, exit-code should not be present.
+    mi_gdb_test "125-list-thread-groups" 
"125\\^done,groups=\\\[\{id=\"i1\",type=\"process\",pid=\"$decimal\",executable=\".*\".*" 
"-list-thread-groups during second run"
+
+    # Exit the inferior.
+    mi_send_resuming_command "exec-continue" "continuing to exit 
inferior (second run)"
+    mi_expect_stop "exited" "" "" "" "" "" "exiting inferior (second run)"
+
+    # Check after the second run, exit-code should be present.
+    mi_gdb_test "126-list-thread-groups" 
"126\\^done,groups=\\\[\{id=\"i1\",type=\"process\",exit-code=\"010\",executable=\".*\"\}\]" 
"-list-thread-groups after second run"
+
+}
+
+test_list_thread_groups
+
+mi_gdb_exit
+return 0

Re: [PATCH v3] Exit code of exited inferiors in -list-thread-groups

[Pedro Alves]

On 06/17/2013 06:55 PM, Simon Marchi wrote:
> Here is a new version of my patch to show the exit code of exited inferiors in -list-thread-groups. 
> I made changes following Pedro's comments at:
> http://sourceware.org/ml/gdb-patches/2013-06/msg00126.html

Thanks.

> gdb/doc/ChangeLog:
> 2013-06-17  Simon Marchi <simon.marchi@ericsson.com>
> 
>     * gdb.texinfo: Document new exit-code field.

This should mention the node name in the bit that goes
in ()'s.  See existing examples.  It should also mention
-list-thread-groups.

> ---
>  gdb/NEWS                              |  3 ++
>  gdb/doc/gdb.texinfo                   |  5 +++
>  gdb/inferior.c                        |  4 +-
>  gdb/mi/mi-main.c                      |  3 ++
>  gdb/testsuite/gdb.mi/mi-exit-code.c   | 29 ++++++++++++++
>  gdb/testsuite/gdb.mi/mi-exit-code.exp | 71 +++++++++++++++++++++++++++++++++++
>  6 files changed, 113 insertions(+), 2 deletions(-)
>  create mode 100644 gdb/testsuite/gdb.mi/mi-exit-code.c
>  create mode 100644 gdb/testsuite/gdb.mi/mi-exit-code.exp
> 

> +@item exit-code
> +The exit code of this thread group when it last exited.  This field is
> +only present for thread groups of type @samp{process} and only if the
> +process is not running.
> +

>        ui_out_field_fmt (uiout, "id", "i%d", inferior->num);
>        ui_out_field_string (uiout, "type", "process");
> +      if (inferior->has_exit_code)
> +    ui_out_field_string (uiout, "exit-code",
> +                 int_string (inferior->exit_code, 8, 0, 0, 1));

Indentation is still wrong here though.  Should be:

      if (inferior->has_exit_code)
	ui_out_field_string (uiout, "exit-code",
			     int_string (inferior->exit_code, 8, 0, 0, 1));


(note: the tabs are not optional)



>        if (inferior->pid != 0)
>      ui_out_field_int (uiout, "pid", inferior->pid);
> 
> diff --git a/gdb/testsuite/gdb.mi/mi-exit-code.c b/gdb/testsuite/gdb.mi/mi-exit-code.c
> new file mode 100644
> index 0000000..a523385
> --- /dev/null
> +++ b/gdb/testsuite/gdb.mi/mi-exit-code.c
> @@ -0,0 +1,29 @@
> +/* Copyright 1999-2013 Free Software Foundation, Inc.
> +
> +   This file is part of GDB.
> +
> +   This program is free software; you can redistribute it and/or modify
> +   it under the terms of the GNU General Public License as published by
> +   the Free Software Foundation; either version 3 of the License, or
> +   (at your option) any later version.
> +
> +   This program is distributed in the hope that it will be useful,
> +   but WITHOUT ANY WARRANTY; without even the implied warranty of
> +   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
> +   GNU General Public License for more details.
> +
> +   You should have received a copy of the GNU General Public License
> +   along with this program.  If not, see <http://www.gnu.org/licenses/>.  */
> +
> +int exit_code = 0;
> +
> +int
> +main(int argc, char **argv)

Space before parens.

> +{
> +  if (argc > 1)
> +    {
> +      exit_code = atoi (argv[1]);
> +    }

Single statement gets no braces.

> +
> +  return exit_code;
> +}
> diff --git a/gdb/testsuite/gdb.mi/mi-exit-code.exp b/gdb/testsuite/gdb.mi/mi-exit-code.exp
> new file mode 100644
> index 0000000..50d8530
> --- /dev/null
> +++ b/gdb/testsuite/gdb.mi/mi-exit-code.exp
> @@ -0,0 +1,71 @@
> +# Copyright 1999-2013 Free Software Foundation, Inc.
> +
> +# This program is free software; you can redistribute it and/or modify
> +# it under the terms of the GNU General Public License as published by
> +# the Free Software Foundation; either version 3 of the License, or
> +# (at your option) any later version.
> +#
> +# This program is distributed in the hope that it will be useful,
> +# but WITHOUT ANY WARRANTY; without even the implied warranty of
> +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
> +# GNU General Public License for more details.
> +#
> +# You should have received a copy of the GNU General Public License
> +# along with this program.  If not, see <http://www.gnu.org/licenses/>.
> +
> +load_lib mi-support.exp
> +set MIFLAGS "-i=mi"
> +
> +gdb_exit
> +if [mi_gdb_start] {
> +    continue
> +}
> +
> +standard_testfile
> +
> +if { [gdb_compile "${srcdir}/${subdir}/${srcfile}" "${binfile}" executable {debug}] != "" } {
> +
> +    untested mi-exit-code.exp

untested "failed to compile $testfile"

http://sourceware.org/gdb/wiki/GDBTestcaseCookbook#A.22untested.22_calls

> +    return -1
> +}
> +
> +proc test_list_thread_groups { } {
> +    global hex

Note this one is unused.  (though my proposal below adds one).

> +    global decimal
> +
> +    # Check before any run, exit-code should not be present.
> +    mi_gdb_test "122-list-thread-groups" "122\\^done,groups=\\\[\{id=\"i1\",type=\"process\"\}\]" "-list-thread-groups before any run"

IMO, it's better to split these long lines between arguments.

> +
> +    mi_run_to_main
> +
> +    # Check during the run, exit-code should not be present.
> +    mi_gdb_test "123-list-thread-groups" "123\\^done,groups=\\\[\{id=\"i1\",type=\"process\",pid=\"$decimal\",executable=\".*\".*" "-list-thread-groups during first run"
> +
> +    # Exit the inferior.
> +    mi_send_resuming_command "exec-continue" "continuing to exit inferior (first run)"
> +    mi_expect_stop "exited-normally" "" "" "" "" "" "exiting inferior (first run)"
> +
> +    # Check after the run, exit-code should be present.
> +    mi_gdb_test "124-list-thread-groups" "124\\^done,groups=\\\[\{id=\"i1\",type=\"process\",exit-code=\"0\",executable=\".*\"\}\]" "-list-thread-groups after first run"
> +
> +    mi_run_to_main

http://sourceware.org/gdb/wiki/GDBTestcaseCookbook#Make_sure_test_messages_are_unique

$ cat testsuite/gdb.sum| grep PASS | sort | uniq -c | sort -n
      1 PASS: gdb.mi/mi-exit-code.exp: exiting inferior (first run)
      1 PASS: gdb.mi/mi-exit-code.exp: exiting inferior (second run)
      1 PASS: gdb.mi/mi-exit-code.exp: -list-thread-groups after first run
      1 PASS: gdb.mi/mi-exit-code.exp: -list-thread-groups after second run
      1 PASS: gdb.mi/mi-exit-code.exp: -list-thread-groups before any run
      1 PASS: gdb.mi/mi-exit-code.exp: -list-thread-groups during first run
      1 PASS: gdb.mi/mi-exit-code.exp: -list-thread-groups during second run
      2 PASS: gdb.mi/mi-exit-code.exp: breakpoint at main
      2 PASS: gdb.mi/mi-exit-code.exp: mi runto main

Note the 2's.

Instead of manually caring to do "first run", "second run" etc. in
each test, we can use with_test_prefix, and that neatly takes care
of those 2's as well.

> +
> +    # Write the exit code we want in the global var
> +    mi_gdb_test "-data-write-memory-bytes &exit_code 08"

This -data-write-memory-bytes is writing one byte to the address of
exit_code (and int), and expecting exit_code to end up with value 8.
That assumes a little endian target; it'll do the wrong thing on big
endian targets, like e.g., PowerPC.  We can just do "set var exit_code = 8"
instead, and let GDB worry about such details.

I went ahead and did all these changes on top of your patch, so you
could see what I mean.  I tweaked the messages and comments a
little.  We now get:

$ cat testsuite/gdb.sum | grep PASS | sort | uniq -c | sort -n
      1 PASS: gdb.mi/mi-exit-code.exp: first run: breakpoint at main
      1 PASS: gdb.mi/mi-exit-code.exp: first run: exit normally
      1 PASS: gdb.mi/mi-exit-code.exp: first run: -list-thread-groups after exit shows exit-code
      1 PASS: gdb.mi/mi-exit-code.exp: first run: -list-thread-groups during run shows no exit-code
      1 PASS: gdb.mi/mi-exit-code.exp: first run: mi runto main
      1 PASS: gdb.mi/mi-exit-code.exp: -list-thread-groups before run shows no exit-code
      1 PASS: gdb.mi/mi-exit-code.exp: second run: breakpoint at main
      1 PASS: gdb.mi/mi-exit-code.exp: second run: exit with code
      1 PASS: gdb.mi/mi-exit-code.exp: second run: -list-thread-groups after exit shows exit-code
      1 PASS: gdb.mi/mi-exit-code.exp: second run: -list-thread-groups during run shows no exit-code
      1 PASS: gdb.mi/mi-exit-code.exp: second run: mi runto main
      1 PASS: gdb.mi/mi-exit-code.exp: second run: write exit code

$ cat testsuite/gdb.sum | grep PASS 
PASS: gdb.mi/mi-exit-code.exp: -list-thread-groups before run shows no exit-code
PASS: gdb.mi/mi-exit-code.exp: first run: breakpoint at main
PASS: gdb.mi/mi-exit-code.exp: first run: mi runto main
PASS: gdb.mi/mi-exit-code.exp: first run: -list-thread-groups during run shows no exit-code
PASS: gdb.mi/mi-exit-code.exp: first run: exit normally
PASS: gdb.mi/mi-exit-code.exp: first run: -list-thread-groups after exit shows exit-code
PASS: gdb.mi/mi-exit-code.exp: second run: breakpoint at main
PASS: gdb.mi/mi-exit-code.exp: second run: mi runto main
PASS: gdb.mi/mi-exit-code.exp: second run: write exit code
PASS: gdb.mi/mi-exit-code.exp: second run: -list-thread-groups during run shows no exit-code
PASS: gdb.mi/mi-exit-code.exp: second run: exit with code
PASS: gdb.mi/mi-exit-code.exp: second run: -list-thread-groups after exit shows exit-code

Could you merge this into your patch, please?

---

 gdb/testsuite/gdb.mi/mi-exit-code.c   |    6 +-
 gdb/testsuite/gdb.mi/mi-exit-code.exp |   81 ++++++++++++++++++++-------------
 2 files changed, 51 insertions(+), 36 deletions(-)

diff --git a/gdb/mi/mi-main.c b/gdb/mi/mi-main.c
index 4fa0c93..0a10930 100644
--- a/gdb/mi/mi-main.c
+++ b/gdb/mi/mi-main.c
@@ -572,8 +572,8 @@ print_one_inferior (struct inferior *inferior, void *xdata)
       ui_out_field_fmt (uiout, "id", "i%d", inferior->num);
       ui_out_field_string (uiout, "type", "process");
       if (inferior->has_exit_code)
-    ui_out_field_string (uiout, "exit-code",
-                 int_string (inferior->exit_code, 8, 0, 0, 1));
+	ui_out_field_string (uiout, "exit-code",
+			     int_string (inferior->exit_code, 8, 0, 0, 1));
       if (inferior->pid != 0)
 	ui_out_field_int (uiout, "pid", inferior->pid);
 
diff --git a/gdb/testsuite/gdb.mi/mi-exit-code.c b/gdb/testsuite/gdb.mi/mi-exit-code.c
index a523385..564efc7 100644
--- a/gdb/testsuite/gdb.mi/mi-exit-code.c
+++ b/gdb/testsuite/gdb.mi/mi-exit-code.c
@@ -18,12 +18,10 @@
 int exit_code = 0;
 
 int
-main(int argc, char **argv)
+main (int argc, char **argv)
 {
   if (argc > 1)
-    {
-      exit_code = atoi (argv[1]);
-    }
+    exit_code = atoi (argv[1]);
 
   return exit_code;
 }
diff --git a/gdb/testsuite/gdb.mi/mi-exit-code.exp b/gdb/testsuite/gdb.mi/mi-exit-code.exp
index 50d8530..c68c7cc 100644
--- a/gdb/testsuite/gdb.mi/mi-exit-code.exp
+++ b/gdb/testsuite/gdb.mi/mi-exit-code.exp
@@ -24,8 +24,7 @@ if [mi_gdb_start] {
 standard_testfile
 
 if { [gdb_compile "${srcdir}/${subdir}/${srcfile}" "${binfile}" executable {debug}] != "" } {
-
-    untested mi-exit-code.exp
+    untested "failed to compile $testfile"
     return -1
 }
 
@@ -33,36 +32,54 @@ proc test_list_thread_groups { } {
     global hex
     global decimal
 
-    # Check before any run, exit-code should not be present.
-    mi_gdb_test "122-list-thread-groups" "122\\^done,groups=\\\[\{id=\"i1\",type=\"process\"\}\]" "-list-thread-groups before any run"
-
-    mi_run_to_main
-
-    # Check during the run, exit-code should not be present.
-    mi_gdb_test "123-list-thread-groups" "123\\^done,groups=\\\[\{id=\"i1\",type=\"process\",pid=\"$decimal\",executable=\".*\".*" "-list-thread-groups during first run"
-
-    # Exit the inferior.
-    mi_send_resuming_command "exec-continue" "continuing to exit inferior (first run)"
-    mi_expect_stop "exited-normally" "" "" "" "" "" "exiting inferior (first run)"
-
-    # Check after the run, exit-code should be present.
-    mi_gdb_test "124-list-thread-groups" "124\\^done,groups=\\\[\{id=\"i1\",type=\"process\",exit-code=\"0\",executable=\".*\"\}\]" "-list-thread-groups after first run"
-
-    mi_run_to_main
-
-    # Write the exit code we want in the global var
-    mi_gdb_test "-data-write-memory-bytes &exit_code 08"
-
-    # Check during the second run, exit-code should not be present.
-    mi_gdb_test "125-list-thread-groups" "125\\^done,groups=\\\[\{id=\"i1\",type=\"process\",pid=\"$decimal\",executable=\".*\".*" "-list-thread-groups during second run"
-
-    # Exit the inferior.
-    mi_send_resuming_command "exec-continue" "continuing to exit inferior (second run)"
-    mi_expect_stop "exited" "" "" "" "" "" "exiting inferior (second run)"
-
-    # Check after the second run, exit-code should be present.
-    mi_gdb_test "126-list-thread-groups" "126\\^done,groups=\\\[\{id=\"i1\",type=\"process\",exit-code=\"010\",executable=\".*\"\}\]" "-list-thread-groups after second run"
-
+    # Before any run, exit-code should not be present.
+    mi_gdb_test \
+	"122-list-thread-groups" \
+	"122\\^done,groups=\\\[\{id=\"i1\",type=\"process\"\}\]" \
+	"-list-thread-groups before run shows no exit-code"
+
+    with_test_prefix "first run" {
+	mi_run_to_main
+
+	# During the run, exit-code should not be present.
+	mi_gdb_test \
+	    "123-list-thread-groups" \
+	    "123\\^done,groups=\\\[\{id=\"i1\",type=\"process\",pid=\"$decimal\",executable=\".*\".*" \
+	    "-list-thread-groups during run shows no exit-code"
+
+	# Exit the inferior.
+	mi_send_resuming_command "exec-continue" "continuing to inferior exit"
+	mi_expect_stop "exited-normally" "" "" "" "" "" "exit normally"
+
+	# After the run, exit-code should be present.
+	mi_gdb_test \
+	    "124-list-thread-groups" \
+	    "124\\^done,groups=\\\[\{id=\"i1\",type=\"process\",exit-code=\"0\",executable=\".*\"\}\]" \
+	    "-list-thread-groups after exit shows exit-code"
+    }
+
+    with_test_prefix "second run" {
+	mi_run_to_main
+
+	# Write the exit code we want in the global var
+	mi_gdb_test "set var exit_code = 8" ".*\\^done" "write exit code"
+
+	# During the second run, exit-code should not be present.
+	mi_gdb_test \
+	    "125-list-thread-groups" \
+	    "125\\^done,groups=\\\[\{id=\"i1\",type=\"process\",pid=\"$decimal\",executable=\".*\".*" \
+	    "-list-thread-groups during run shows no exit-code"
+
+	# Exit the inferior.
+	mi_send_resuming_command "exec-continue" "continuing to inferior exit"
+	mi_expect_stop "exited" "" "" "" "" "" "exit with code"
+
+	# After the second run, exit-code should be present.
+	mi_gdb_test \
+	    "126-list-thread-groups" \
+	    "126\\^done,groups=\\\[\{id=\"i1\",type=\"process\",exit-code=\"010\",executable=\".*\"\}\]" \
+	    "-list-thread-groups after exit shows exit-code"
+    }
 }
 
 test_list_thread_groups

Re: [PATCH v3] Exit code of exited inferiors in -list-thread-groups

[Simon Marchi]

On 13-06-18 08:42 AM, Pedro Alves wrote:
>> gdb/doc/ChangeLog:
>> 2013-06-17  Simon Marchi <simon.marchi@ericsson.com>
>>
>>     * gdb.texinfo: Document new exit-code field.
> 
> This should mention the node name in the bit that goes
> in ()'s.  See existing examples.  It should also mention
> -list-thread-groups.

Ok, so it would look like:

2013-06-25  Simon Marchi <simon.marchi@ericsson.com>

	* gdb.texinfo (Miscellaneous gdb/mi Commands): Document new
	exit-code field in -list-thread-groups output.

> I went ahead and did all these changes on top of your patch, so you
> could see what I mean.  I tweaked the messages and comments a
> little.  

Thanks for that and the comments. The test looks much cleaner with these
changes.

I suppose this patch will be ready to merge once the legal process is
completed and I get the access ?

Re: [PATCH v3] Exit code of exited inferiors in -list-thread-groups

[Pedro Alves]

On 06/25/2013 08:49 PM, Simon Marchi wrote:
> On 13-06-18 08:42 AM, Pedro Alves wrote:
>>> gdb/doc/ChangeLog:
>>> 2013-06-17  Simon Marchi <simon.marchi@ericsson.com>
>>>
>>>     * gdb.texinfo: Document new exit-code field.
>>
>> This should mention the node name in the bit that goes
>> in ()'s.  See existing examples.  It should also mention
>> -list-thread-groups.
> 
> Ok, so it would look like:
> 
> 2013-06-25  Simon Marchi <simon.marchi@ericsson.com>
> 
> 	* gdb.texinfo (Miscellaneous gdb/mi Commands): Document new
> 	exit-code field in -list-thread-groups output.
> 
>> I went ahead and did all these changes on top of your patch, so you
>> could see what I mean.  I tweaked the messages and comments a
>> little.  
> 
> Thanks for that and the comments. The test looks much cleaner with these
> changes.
> 
> I suppose this patch will be ready to merge once the legal process is
> completed and I get the access ?

Yep.  Could you post the final version, so we have it in the
archives, and so we can give everyone else a chance of seeing it
in final proposed version too?

Thanks!

-- 
Pedro Alves