From: Alex Chronopoulos <achronop@gmail.com>
To: gdb-patches@sourceware.org
Cc: Alex Chronopoulos <achronop@gmail.com>
Subject: [PATCH v6] Change message when reaching end of reverse history.
Date: Fri, 2 Aug 2024 18:43:06 +0200 [thread overview]
Message-ID: <20240802164306.252264-1-achronop@gmail.com> (raw)
In a record session, when we move backward, GDB switches from normal
execution to simulation. Moving forward again, the emulation continues
until the end of the reverse history. When the end is reached, the
execution stops, and a warning message is shown. This message has been
modified to indicate that the forward emulation has reached the end, but
the execution can continue as normal, and the recording will also continue.
Before this patch, the warning message shown in that case was the same as
in the reverse case. This meant that when the end of history was reached in
either backward or forward emulation, the same message was displayed:
"No more reverse-execution history."
This message has changed for these two cases. Backward emulation:
"Reached end of recorded history; stopping.
Backward execution from here not possible."
Forward emulation:
"Reached end of recorded history; stopping.
Following forward execution will be added to history."
The reason for this change is that the initial message was deceiving, for
the forward case, making the user believe that forward debugging could not
continue.
Bug: https://sourceware.org/bugzilla/show_bug.cgi?id=31224
---
gdb/NEWS | 5 +++
gdb/infrun.c | 9 +++++-
.../gdb.btrace/multi-thread-step.exp | 6 ++--
gdb/testsuite/gdb.btrace/nohist.exp | 2 +-
gdb/testsuite/gdb.btrace/non-stop.exp | 32 ++++++++++++-------
gdb/testsuite/gdb.btrace/stepi.exp | 14 ++++----
gdb/testsuite/gdb.reverse/break-precsave.exp | 6 ++--
gdb/testsuite/gdb.reverse/break-reverse.exp | 4 +--
.../gdb.reverse/machinestate-precsave.exp | 2 +-
gdb/testsuite/gdb.reverse/sigall-precsave.exp | 2 +-
gdb/testsuite/gdb.reverse/sigall-reverse.exp | 2 +-
.../gdb.reverse/singlejmp-reverse.exp | 6 ++--
12 files changed, 57 insertions(+), 33 deletions(-)
diff --git a/gdb/NEWS b/gdb/NEWS
index 50c033a7cfd..5d457b37796 100644
--- a/gdb/NEWS
+++ b/gdb/NEWS
@@ -20,6 +20,11 @@
* MTE (Memory Tagging Extension) debugging is now supported on AArch64 baremetal
targets.
+* In a record session, when a forward emulation reaches the end of the reverse
+ history, the warning message has been changed to indicate that the end of the
+ history has been reached. It also specifies that the forward execution can
+ continue, and the recording will also continue.
+
*** Changes in GDB 15
* The MPX commands "show/set mpx bound" have been deprecated, as Intel
diff --git a/gdb/infrun.c b/gdb/infrun.c
index 06b454bf78f..a0d1b99be3e 100644
--- a/gdb/infrun.c
+++ b/gdb/infrun.c
@@ -9266,8 +9266,15 @@ print_no_history_reason (struct ui_out *uiout)
{
if (uiout->is_mi_like_p ())
uiout->field_string ("reason", async_reason_lookup (EXEC_ASYNC_NO_HISTORY));
+ else if (execution_direction == EXEC_FORWARD)
+ uiout->text ("\nReached end of recorded history; stopping.\nFollowing "
+ "forward execution will be added to history.\n");
else
- uiout->text ("\nNo more reverse-execution history.\n");
+ {
+ gdb_assert (execution_direction == EXEC_REVERSE);
+ uiout->text ("\nReached end of recorded history; stopping.\nBackward "
+ "execution from here not possible.\n");
+ }
}
/* Print current location without a level number, if we have changed
diff --git a/gdb/testsuite/gdb.btrace/multi-thread-step.exp b/gdb/testsuite/gdb.btrace/multi-thread-step.exp
index 154db9ae515..cd20e8ad9f0 100644
--- a/gdb/testsuite/gdb.btrace/multi-thread-step.exp
+++ b/gdb/testsuite/gdb.btrace/multi-thread-step.exp
@@ -111,14 +111,14 @@ proc test_cont {} {
with_test_prefix "cont" {
gdb_test "thread 1" ".*"
with_test_prefix "thread 1" {
- gdb_test "continue" "No more reverse-execution history.*"
+ gdb_test "continue" "Reached end of recorded history.*"
check_not_replaying 1
check_replay_insn 2 2
}
gdb_test "thread 2" ".*"
with_test_prefix "thread 2" {
- gdb_test "continue" "No more reverse-execution history.*"
+ gdb_test "continue" "Reached end of recorded history.*"
check_not_replaying 1
check_not_replaying 2
@@ -128,7 +128,7 @@ proc test_cont {} {
proc test_cont_all {} {
with_test_prefix "cont-all" {
- gdb_test "continue" "No more reverse-execution history.*"
+ gdb_test "continue" "Reached end of recorded history.*"
# this works because we're lock-stepping threads that executed exactly
# the same code starting from the same instruction.
diff --git a/gdb/testsuite/gdb.btrace/nohist.exp b/gdb/testsuite/gdb.btrace/nohist.exp
index d71909181c4..ac6a41c63e4 100644
--- a/gdb/testsuite/gdb.btrace/nohist.exp
+++ b/gdb/testsuite/gdb.btrace/nohist.exp
@@ -42,7 +42,7 @@ with_test_prefix "forward" {
check_not_replaying
}
-gdb_test "reverse-continue" "No more reverse-execution history\.\r\n.*"
+gdb_test "reverse-continue" "Reached end of recorded history; stopping.*"
with_test_prefix "backward" {
check_not_replaying
diff --git a/gdb/testsuite/gdb.btrace/non-stop.exp b/gdb/testsuite/gdb.btrace/non-stop.exp
index 62c940e4cd6..5e43545f6a9 100644
--- a/gdb/testsuite/gdb.btrace/non-stop.exp
+++ b/gdb/testsuite/gdb.btrace/non-stop.exp
@@ -79,16 +79,26 @@ proc gdb_cont_to_bp_line { line threads nthreads } {
$nthreads
}
-proc gdb_cont_to_no_history { threads cmd nthreads } {
+proc gdb_cont_to_no_history_backward { threads cmd nthreads } {
gdb_cont_to $threads $cmd \
[multi_line \
- "No more reverse-execution history\." \
+ "Reached end of recorded.*Backward execution.*" \
"\[^\\\r\\\n\]*" \
"\[^\\\r\\\n\]*" \
] \
$nthreads
}
+proc gdb_cont_to_no_history_forward { threads cmd nthreads } {
+ gdb_cont_to $threads $cmd \
+ [multi_line \
+ "Reached end of recorded.*Following forward.*" \
+ "\[^\\\r\\\n\]*" \
+ "\[^\\\r\\\n\]*" \
+ ] \
+ $nthreads
+}
+
# trace the code between the two breakpoints
with_test_prefix "prepare" {
gdb_cont_to_bp_line "$srcfile:$bp_1" all 2
@@ -176,14 +186,14 @@ with_test_prefix "reverse-step" {
with_test_prefix "continue" {
with_test_prefix "thread 1" {
with_test_prefix "continue" {
- gdb_cont_to_no_history 1 "continue" 1
+ gdb_cont_to_no_history_forward 1 "continue" 1
gdb_test "thread apply 1 info record" \
".*Recorded \[0-9\]+ instructions \[^\\\r\\\n\]*"
gdb_test "thread apply 2 info record" \
".*Replay in progress\. At instruction 5\."
}
with_test_prefix "reverse-continue" {
- gdb_cont_to_no_history 1 "reverse-continue" 1
+ gdb_cont_to_no_history_backward 1 "reverse-continue" 1
gdb_test "thread apply 1 info record" \
".*Replay in progress\. At instruction 1\."
gdb_test "thread apply 2 info record" \
@@ -193,14 +203,14 @@ with_test_prefix "continue" {
with_test_prefix "thread 2" {
with_test_prefix "continue" {
- gdb_cont_to_no_history 2 "continue" 1
+ gdb_cont_to_no_history_forward 2 "continue" 1
gdb_test "thread apply 1 info record" \
".*Replay in progress\. At instruction 1\."
gdb_test "thread apply 2 info record" \
".*Recorded \[0-9\]+ instructions \[^\\\r\\\n\]*"
}
with_test_prefix "reverse-continue" {
- gdb_cont_to_no_history 2 "reverse-continue" 1
+ gdb_cont_to_no_history_backward 2 "reverse-continue" 1
gdb_test "thread apply 1 info record" \
".*Replay in progress\. At instruction 1\."
gdb_test "thread apply 2 info record" \
@@ -215,8 +225,8 @@ with_test_prefix "no progress" {
gdb_test "thread apply 1 record goto end" ".*"
gdb_test "thread apply 2 record goto begin" ".*"
- gdb_cont_to_no_history 1 "continue" 1
- gdb_cont_to_no_history 1 "step" 1
+ gdb_cont_to_no_history_forward 1 "continue" 1
+ gdb_cont_to_no_history_forward 1 "step" 1
gdb_test "thread apply 1 info record" \
".*Recorded \[0-9\]+ instructions \[^\\\r\\\n\]*"
gdb_test "thread apply 2 info record" \
@@ -227,8 +237,8 @@ with_test_prefix "no progress" {
gdb_test "thread apply 1 record goto begin" ".*"
gdb_test "thread apply 2 record goto end" ".*"
- gdb_cont_to_no_history 2 "continue" 1
- gdb_cont_to_no_history 2 "step" 1
+ gdb_cont_to_no_history_forward 2 "continue" 1
+ gdb_cont_to_no_history_forward 2 "step" 1
gdb_test "thread apply 1 info record" \
".*Replay in progress\. At instruction 1\."
gdb_test "thread apply 2 info record" \
@@ -238,7 +248,7 @@ with_test_prefix "no progress" {
with_test_prefix "all" {
gdb_test "thread apply all record goto begin" ".*"
- gdb_cont_to_no_history all "continue" 2
+ gdb_cont_to_no_history_forward all "continue" 2
gdb_test "thread apply 1 info record" \
".*Recorded \[0-9\]+ instructions \[^\\\r\\\n\]*"
gdb_test "thread apply 2 info record" \
diff --git a/gdb/testsuite/gdb.btrace/stepi.exp b/gdb/testsuite/gdb.btrace/stepi.exp
index a70a5adf046..689bc792b24 100644
--- a/gdb/testsuite/gdb.btrace/stepi.exp
+++ b/gdb/testsuite/gdb.btrace/stepi.exp
@@ -100,7 +100,7 @@ with_test_prefix "reverse-nexti.1" {
# we can't reverse-nexti any further
with_test_prefix "reverse-nexti.2" {
gdb_test "reverse-nexti" \
- "No more reverse-execution history\.\r\n.*main\.2.*" \
+ "Reached end of recorded history; stopping\.\r\n.*main\.2.*" \
"reverse-nexti.2"
check_replay_at 1
}
@@ -140,20 +140,20 @@ with_test_prefix "goto begin" {
with_test_prefix "reverse-stepi" {
gdb_test "reverse-stepi" \
- "No more reverse-execution history\.\r\n.*main\.2.*" \
+ "Reached end of recorded history; stopping\.\r\n.*main\.2.*" \
"reverse-stepi.1"
gdb_test "reverse-stepi" \
- "No more reverse-execution history\.\r\n.*main\.2.*" \
+ "Reached end of recorded history; stopping\.\r\n.*main\.2.*" \
"reverse-stepi.2"
check_replay_at 1
}
with_test_prefix "reverse-nexti" {
gdb_test "reverse-nexti" \
- "No more reverse-execution history\.\r\n.*main\.2.*" \
+ "Reached end of recorded history; stopping\.\r\n.*main\.2.*" \
"reverse-nexti.1"
gdb_test "reverse-nexti" \
- "No more reverse-execution history\.\r\n.*main\.2.*" \
+ "Reached end of recorded history; stopping\.\r\n.*main\.2.*" \
"reverse-nexti.2"
check_replay_at 1
}
@@ -169,10 +169,10 @@ with_test_prefix "goto begin" {
with_test_prefix "reverse-stepi" {
gdb_test "reverse-stepi" ".*main\.2.*" "reverse-stepi.1"
gdb_test "reverse-stepi" \
- "No more reverse-execution history\.\r\n.*main\.2.*" \
+ "Reached end of recorded history; stopping\.\r\n.*main\.2.*" \
"reverse-stepi.2"
gdb_test "reverse-stepi" \
- "No more reverse-execution history\.\r\n.*main\.2.*" \
+ "Reached end of recorded history; stopping\.\r\n.*main\.2.*" \
"reverse-stepi.3"
check_replay_at 1
}
diff --git a/gdb/testsuite/gdb.reverse/break-precsave.exp b/gdb/testsuite/gdb.reverse/break-precsave.exp
index b9d94681247..6d9b312185f 100644
--- a/gdb/testsuite/gdb.reverse/break-precsave.exp
+++ b/gdb/testsuite/gdb.reverse/break-precsave.exp
@@ -73,7 +73,7 @@ proc precsave_tests {} {
-re ".*Breakpoint $decimal,.*$srcfile:$end_location.*$gdb_prompt $" {
pass "go to end of main forward"
}
- -re "No more reverse-execution history.* end of main .*$gdb_prompt $" {
+ -re -wrap "Reached end of recorded.*Following forward.* end of main .*" {
pass "go to end of main forward"
}
}
@@ -87,7 +87,7 @@ proc precsave_tests {} {
-re ".*Breakpoint $decimal,.*$srcfile:$main_location.*$gdb_prompt $" {
pass "main backward"
}
- -re "No more reverse-execution history.* break in main .*$gdb_prompt $" {
+ -re -wrap "Reached end of recorded.*Backward execution.* break in main .*" {
pass "main backward"
}
}
@@ -103,7 +103,7 @@ proc precsave_tests {} {
-re ".*Breakpoint $decimal,.*$srcfile:$end_location.*$gdb_prompt $" {
pass "end of record log"
}
- -re "No more reverse-execution history.* end of main .*$gdb_prompt $" {
+ -re -wrap "Reached end of recorded.*Following forward.* end of main .*" {
pass "end of record log"
}
}
diff --git a/gdb/testsuite/gdb.reverse/break-reverse.exp b/gdb/testsuite/gdb.reverse/break-reverse.exp
index 1dd327ca654..66e9712707f 100644
--- a/gdb/testsuite/gdb.reverse/break-reverse.exp
+++ b/gdb/testsuite/gdb.reverse/break-reverse.exp
@@ -64,7 +64,7 @@ gdb_test_multiple "continue" "main backward" {
-re ".*Breakpoint $decimal,.*$srcfile:$main_location.*$gdb_prompt $" {
pass "main backward"
}
- -re "No more reverse-execution history.* break in main .*$gdb_prompt $" {
+ -re -wrap "Reached end of recorded history.*Backward execution.*" {
pass "main backward"
}
}
@@ -80,7 +80,7 @@ gdb_test_multiple "continue" "end of record log" {
-re ".*Breakpoint $decimal,.*$srcfile:$end_location.*$gdb_prompt $" {
pass "end of record log"
}
- -re "No more reverse-execution history.* end of main .*$gdb_prompt $" {
+ -re -wrap "Reached end of recorded history.*Following forward.*" {
pass "end of record log"
}
}
diff --git a/gdb/testsuite/gdb.reverse/machinestate-precsave.exp b/gdb/testsuite/gdb.reverse/machinestate-precsave.exp
index 19c5934bfdf..cedca0f9b65 100644
--- a/gdb/testsuite/gdb.reverse/machinestate-precsave.exp
+++ b/gdb/testsuite/gdb.reverse/machinestate-precsave.exp
@@ -85,7 +85,7 @@ gdb_test_multiple "continue" "go to end of main forward" {
-re ".*Breakpoint $decimal,.*$srcfile:$endmain.*$gdb_prompt $" {
pass "go to end of main forward"
}
- -re "No more reverse-execution history.* end main .*$gdb_prompt $" {
+ -re -wrap "Reached end of recorded history.*Following forward.*" {
pass "go to end of main forward"
}
}
diff --git a/gdb/testsuite/gdb.reverse/sigall-precsave.exp b/gdb/testsuite/gdb.reverse/sigall-precsave.exp
index e5890ad7af7..aab4551c874 100644
--- a/gdb/testsuite/gdb.reverse/sigall-precsave.exp
+++ b/gdb/testsuite/gdb.reverse/sigall-precsave.exp
@@ -128,7 +128,7 @@ proc test_one_sig_reverse {prevsig} {
xfail "$testmsg (handled)"
}
}
- -re "No more reverse-execution history.*kill.*$gdb_prompt " {
+ -re "Reached end of recorded history.*Backward execution.*kill.*$gdb_prompt " {
if {$saw_signal} {
pass "$testmsg (handled)"
} else {
diff --git a/gdb/testsuite/gdb.reverse/sigall-reverse.exp b/gdb/testsuite/gdb.reverse/sigall-reverse.exp
index f2cf55b8ae4..884b178f9ee 100644
--- a/gdb/testsuite/gdb.reverse/sigall-reverse.exp
+++ b/gdb/testsuite/gdb.reverse/sigall-reverse.exp
@@ -134,7 +134,7 @@ proc test_one_sig_reverse {prevsig} {
xfail "$testmsg (handled)"
}
}
- -re "No more reverse-execution history.*kill.*$gdb_prompt " {
+ -re "Reached end of recorded.*Backward execution.*kill.*$gdb_prompt " {
if {$saw_signal} {
pass "$testmsg (handled)"
} else {
diff --git a/gdb/testsuite/gdb.reverse/singlejmp-reverse.exp b/gdb/testsuite/gdb.reverse/singlejmp-reverse.exp
index 971d88b5ce6..73923564514 100644
--- a/gdb/testsuite/gdb.reverse/singlejmp-reverse.exp
+++ b/gdb/testsuite/gdb.reverse/singlejmp-reverse.exp
@@ -50,11 +50,13 @@ gdb_test "next" {nodebug \(\);} "next to nodebug"
gdb_test "next" {v = 3;} "next to v = 3"
# FAIL was:
-# No more reverse-execution history.
+# Reached end of recorded history; stopping.
+# Backward execution from here not possible.
# {
gdb_test "reverse-step" {nodebug \(\);}
# FAIL was:
-# No more reverse-execution history.
+# Reached end of recorded history; stopping.
+# Backward execution from here not possible.
# {
gdb_test "reverse-next" {f \(\);}
--
2.45.2
next reply other threads:[~2024-08-02 16:43 UTC|newest]
Thread overview: 10+ messages / expand[flat|nested] mbox.gz Atom feed top
2024-08-02 16:43 Alex Chronopoulos [this message]
2024-08-12 19:50 ` Guinevere Larsen
2024-08-13 8:52 ` Metzger, Markus T
2024-08-13 11:55 ` Guinevere Larsen
2024-08-13 18:18 ` Alex Chronopoulos
2024-08-13 18:26 ` Guinevere Larsen
2024-08-23 12:25 ` Alex Chronopoulos
2024-08-26 13:41 ` Guinevere Larsen
2024-08-27 10:17 ` Tom de Vries
2024-08-27 11:07 ` Guinevere Larsen
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20240802164306.252264-1-achronop@gmail.com \
--to=achronop@gmail.com \
--cc=gdb-patches@sourceware.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox