Mirror of the gdb-patches mailing list
 help / color / mirror / Atom feed
* Re: [PATCH] - Accept optional printed address at function breakpoints
@ 2003-12-08 16:53 Michael Elizabeth Chastain
  0 siblings, 0 replies; 6+ messages in thread
From: Michael Elizabeth Chastain @ 2003-12-08 16:53 UTC (permalink / raw)
  To: drow, fnf; +Cc: gdb-patches

drow> This is a debug info bug.  Your patch is not correct; when you say
drow> "break LINE" or "break FUNCTION" and there is debug info, it's GDB's
drow> established behavior to stop at the beginning of a line.  By not
drow> allowing the address we verify that GDB is stopping at the beginning of
drow> a line as expected.

That's right.  It's a subtle way of testing that the line number
information is correct.  If gdb prints a machine address in addition
to a line number, then either gcc has a bug in debug info output,
or gdb has a bug in debug info input.

Michael C


^ permalink raw reply	[flat|nested] 6+ messages in thread
* Re: [PATCH] - Accept optional printed address at function breakpoints
@ 2003-12-08 18:02 Michael Elizabeth Chastain
  0 siblings, 0 replies; 6+ messages in thread
From: Michael Elizabeth Chastain @ 2003-12-08 18:02 UTC (permalink / raw)
  To: fnf; +Cc: drow, gdb-patches

Fred Fish writes:
> On one hand, I can see the value of having just a single test that
> focuses on confirming/enforcing this behavior and be more lenient
> about the patterns we accept in general.  On the other hand, I can see
> that having dozens of new failures pop up due to a change in gcc debug
> output could be helpful in getting enough attention to get the problem
> fixed.

I favor the first hand.  I would like to have one specific test script
which is devoted to this issue with a bunch of cases in it.  Then let it
slide in every other test script.

To be sure, we might not get complete coverage of this bug without all
the windfall testing from other places.  But it's just not a very
important bug to users, so I think it's not worth vitiating other parts
of the test suite just to get more coverage of this bug.

As far as the "dozens of new failures" go, it is easier for me if a bug
causes one FAIL rather than a dozen FAILs.  I do track every individual
result change.

Michael C


^ permalink raw reply	[flat|nested] 6+ messages in thread
* [PATCH] - Accept optional printed address at function breakpoints
@ 2003-12-08 16:25 Fred Fish
  2003-12-08 16:48 ` Daniel Jacobowitz
  2003-12-09  4:39 ` Fred Fish
  0 siblings, 2 replies; 6+ messages in thread
From: Fred Fish @ 2003-12-08 16:25 UTC (permalink / raw)
  To: gdb-patches; +Cc: fnf

I decided to investigate the following failure in funcargs.exp:

  FAIL: gdb.base/funcargs.exp: continue to call6k

The problem can reproduced using:

  void foo ()
  {
  }

  void bar ()
  {
    static int dummy = 0;
  }

  main ()
  {
    foo ();
    bar ();
  }

Using x86 native gdb:

  $ gcc -g -o x x.c
  $ gdb -nw -nx x
  GNU gdb 2003-12-07-cvs
  Copyright 2003 Free Software Foundation, Inc.
  GDB is free software, covered by the GNU General Public License, and you are
  welcome to change it and/or distribute copies of it under certain conditions.
  Type "show copying" to see the conditions.
  There is absolutely no warranty for GDB.  Type "show warranty" for details.
  This GDB was configured as "i686-pc-linux-gnu"...Using host libthread_db library "/lib/tls/libthread_db.so.1".
  
  (gdb) br foo
  Breakpoint 1 at 0x8048327: file x.c, line 2.
  (gdb) br bar
  Breakpoint 2 at 0x804832c: file x.c, line 8.
  (gdb) run
  Starting program: /links3/build/sourceware/gdb/T-i686-pc-linux-gnu/gdb/x 
  
  Breakpoint 1, 0x08048327 in foo () at x.c:2
  2       {
  (gdb) x/i $pc
  0x8048327 <foo+3>:      pop    %ebp
  (gdb) c
  Continuing.
  
  Breakpoint 2, bar () at x.c:8
  8       }
  (gdb) x/i $pc
  0x804832c <bar+3>:      pop    %ebp
  (gdb) 

There are two things to note from the above run:

  (1) Both functions stop at the same relative position in each of
  foo() and bar().  Gdb is smart enough to break at the first 
  instruction after the prologue.

  (2) The breakpoint message for bar() does NOT include an address,
  while the one for foo() does contain an address.

These messages are tested in lib/gdb.exp with:

  proc gdb_continue { function } {
    global decimal

    return [gdb_test "continue" ".*Breakpoint $decimal, $function .*" "continue to $function"];
  }

which does NOT allow any address in the breakpoint message.

If you disassemble the object file you can see the problem:

  00000000 <foo>:
  foo():
  /build/sourceware/gdb/T-i686-pc-linux-gnu/gdb/x.c:2
     0:   55                      push   %ebp
     1:   89 e5                   mov    %esp,%ebp
     3:   5d                      pop    %ebp
     4:   c3                      ret    
  
  00000005 <bar>:
  bar():
  /build/sourceware/gdb/T-i686-pc-linux-gnu/gdb/x.c:6
     5:   55                      push   %ebp
     6:   89 e5                   mov    %esp,%ebp
  /build/sourceware/gdb/T-i686-pc-linux-gnu/gdb/x.c:8
     8:   5d                      pop    %ebp
     9:   c3                      ret    
  
For the failing case (foo), the entire function body is covered by
just one source line, line number 2.  For the succeeding case (bar)
there are two line numbers, one for the prologue code and one for the
epilogue code.

The documented behavior of gdb is to NOT print the address when it
hits a breakpoint at the first instruction associated with a new source
code line.

It's also interesting to note that the generated code is identical for
both functions, leading to a separate issue (bug?) of why gcc
generates different debug info for the two functions.

If we punt on the issue of whether or not the debug info is correct,
this patch fixes the problem.

-Fred

==================================================================

2003-12-08  Fred Fish  <fnf@redhat.com>

	* lib/gdb.exp (gdb_continue): Accept optional address printed
	when stopping at a breakpointed function.
 
Index: lib/gdb.exp
===================================================================
RCS file: /cvs/src/src/gdb/testsuite/lib/gdb.exp,v
retrieving revision 1.41
diff -c -r1.41 gdb.exp
*** lib/gdb.exp	23 Nov 2003 01:09:19 -0000	1.41
--- lib/gdb.exp	8 Dec 2003 16:21:36 -0000
***************
*** 1616,1623 ****
  
  proc gdb_continue { function } {
      global decimal
  
!     return [gdb_test "continue" ".*Breakpoint $decimal, $function .*" "continue to $function"];
  }
  
  proc default_gdb_init { args } {
--- 1616,1624 ----
  
  proc gdb_continue { function } {
      global decimal
+     global hex
  
!     return [gdb_test "continue" ".*Breakpoint $decimal, ($hex in )?$function .*" "continue to $function"];
  }
  
  proc default_gdb_init { args } {


^ permalink raw reply	[flat|nested] 6+ messages in thread
end of thread, other threads:[~2003-12-09  4:39 UTC | newest]

Thread overview: 6+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2003-12-08 16:53 [PATCH] - Accept optional printed address at function breakpoints Michael Elizabeth Chastain
  -- strict thread matches above, loose matches on Subject: below --
2003-12-08 18:02 Michael Elizabeth Chastain
2003-12-08 16:25 Fred Fish
2003-12-08 16:48 ` Daniel Jacobowitz
2003-12-08 17:51   ` Fred Fish
2003-12-09  4:39 ` Fred Fish

This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox