* Re: Patch to gdb.texinfo
2000-03-13 0:59 ` Patch to gdb.texinfo Eli Zaretskii
@ 2000-03-13 1:33 ` Eli Zaretskii
0 siblings, 0 replies; 2+ messages in thread
From: Eli Zaretskii @ 2000-03-13 1:33 UTC (permalink / raw)
To: Dmitry Sivachenko; +Cc: gdb-patches
> > -For complicated cases, you can specify an arbitrary number of @r{-T}@var{section} @var{address}
> > +For complicated cases, you can specify an arbitrary number of @samp{@r{-T}@var{section} @var{address}}
> I don't see the rationale for this change. Could you please explain?
>
> Look at the printable copy. Single quotes around `-Tsection address'
> looks better.
You don't need a @samp to add the quotes.
What I wanted to point out was that a @samp whose effect is
effectively undone by @r and @var is not necessary.
I'll let Stan decide on this one.
From dima@Chg.RU Mon Mar 13 01:44:00 2000
From: Dmitry Sivachenko <dima@Chg.RU>
To: eliz@is.elta.co.il
Cc: gdb-patches@sourceware.cygnus.com
Subject: Re: Patch to gdb.texinfo
Date: Mon, 13 Mar 2000 01:44:00 -0000
Message-id: <200003130944.MAA64255@netserv1.chg.ru>
References: <200003130906.MAA63437@netserv1.chg.ru> <200003121611.TAA45044@netserv1.chg.ru> <200003130859.DAA25938@indy.delorie.com> <200003130933.EAA25971@indy.delorie.com>
X-SW-Source: 2000-03/msg00224.html
Content-length: 771
> > -For complicated cases, you can specify an arbitrary number of @r{-T}@var{section} @var{address}
> > +For complicated cases, you can specify an arbitrary number of @samp{@r{-T}@var{section} @var{address}}
> I don't see the rationale for this change. Could you please explain?
>
> Look at the printable copy. Single quotes around `-Tsection address'
> looks better.
You don't need a @samp to add the quotes.
What I wanted to point out was that a @samp whose effect is
effectively undone by @r and @var is not necessary.
I'll let Stan decide on this one.
OK, may be it is better to replace @samp with explicit quotes (`.....').
--dima
From Peter.Schauer@regent.e-technik.tu-muenchen.de Mon Mar 13 01:48:00 2000
From: "Peter.Schauer" <Peter.Schauer@regent.e-technik.tu-muenchen.de>
To: gdb-patches@sourceware.cygnus.com
Subject: RFD: infrun.c: No bpstat_stop_status call after proceed over break ?
Date: Mon, 13 Mar 2000 01:48:00 -0000
Message-id: <200003130948.KAA07547@reisser.regent.e-technik.tu-muenchen.de>
X-SW-Source: 2000-03/msg00226.html
Content-length: 4730
I am currently trying to fix a GDB bug with missing watchpoint triggers
after proceeding over a breakpoint on x86 targets.
Here is an example, using gdb.c++/annota2:
(gdb) b main
Breakpoint 1 at 0x8048b3a: file annota2.cc, line 21.
(gdb) r
Starting program: annota2
Breakpoint 1, main () at annota2.cc:21
21 a.x = 0;
(gdb) watch a.x
Watchpoint 2: a.x
(gdb) c
Continuing.
Watchpoint 2: a.x
Old value = -536882292
New value = 1
main () at annota2.cc:23
23 a.y = 2;
(gdb)
The breakpoint at main is at the instruction which should cause the
watchpoint trigger (a.x = 0).
When continuing over the breakpoint, breakpoints are removed and the target
is single stepped with trap_expected set to one.
After the step GDB does not reexamine the stop reason, missing the watchpoint
trigger at a.x = 0 and stops too late at the second watchpoint trigger.
Here is the relevant code from handle_inferior_event:
/* Don't even think about breakpoints
if just proceeded over a breakpoint.
However, if we are trying to proceed over a breakpoint
and end up in sigtramp, then through_sigtramp_breakpoint
will be set and we should check whether we've hit the
step breakpoint. */
if (stop_signal == TARGET_SIGNAL_TRAP && trap_expected
&& through_sigtramp_breakpoint == NULL)
bpstat_clear (&stop_bpstat);
else
{
/* See if there is a breakpoint at the current PC. */
stop_bpstat = bpstat_stop_status
(&stop_pc,
.
.
I currently have no idea why we need to special case the proceed over
a breakpoint here, perhaps it is some historic remnant (although I do have
this nagging feeling that I might miss something obvious).
The patch below would get rid of the special case and fix the problem, it
causes no testsuite regressions. Note that bpstat_clear is called and
stop_print_frame is set to 1 unconditionally already a few lines above the
bpstat_stop_status call, so there is no need to do it again.
Any suggestions why we should need the old special case ?
2000-03-12 Peter Schauer <pes@regent.e-technik.tu-muenchen.de>
* infrun.c (handle_inferior_event): Remove special case for stop
after proceeding over a breakpoint, it caused missed watchpoints.
*** gdb/infrun.c.orig Thu Feb 24 13:41:46 2000
--- gdb/infrun.c Mon Mar 13 10:11:50 2000
***************
*** 2076,2110 ****
return;
}
! /* Don't even think about breakpoints
! if just proceeded over a breakpoint.
!
! However, if we are trying to proceed over a breakpoint
! and end up in sigtramp, then through_sigtramp_breakpoint
! will be set and we should check whether we've hit the
! step breakpoint. */
! if (stop_signal == TARGET_SIGNAL_TRAP && trap_expected
! && through_sigtramp_breakpoint == NULL)
! bpstat_clear (&stop_bpstat);
! else
! {
! /* See if there is a breakpoint at the current PC. */
! stop_bpstat = bpstat_stop_status
! (&stop_pc,
! /* Pass TRUE if our reason for stopping is something other
! than hitting a breakpoint. We do this by checking that
! 1) stepping is going on and 2) we didn't hit a breakpoint
! in a signal handler without an intervening stop in
! sigtramp, which is detected by a new stack pointer value
! below any usual function calling stack adjustments. */
! (currently_stepping (ecs)
! && !(step_range_end
! && INNER_THAN (read_sp (), (step_sp - 16))))
! );
! /* Following in case break condition called a
! function. */
! stop_print_frame = 1;
! }
if (stop_signal == TARGET_SIGNAL_TRAP)
ecs->random_signal
--- 2092,2114 ----
return;
}
! /* See if there is a breakpoint at the current PC.
! Older versions of GDB did not call bpstat_stop_status after
! proceeding over a breakpoint, causing missed watchpoints when
! proceeding over a breakpoint on an instruction which triggers
! a watchpoint. */
! stop_bpstat = bpstat_stop_status
! (&stop_pc,
! /* Pass TRUE if our reason for stopping is something other
! than hitting a breakpoint. We do this by checking that
! 1) stepping is going on and 2) we didn't hit a breakpoint
! in a signal handler without an intervening stop in
! sigtramp, which is detected by a new stack pointer value
! below any usual function calling stack adjustments. */
! (currently_stepping (ecs)
! && !(step_range_end
! && INNER_THAN (read_sp (), (step_sp - 16))))
! );
if (stop_signal == TARGET_SIGNAL_TRAP)
ecs->random_signal
--
Peter Schauer pes@regent.e-technik.tu-muenchen.de
From Peter.Schauer@regent.e-technik.tu-muenchen.de Mon Mar 13 01:48:00 2000
From: "Peter.Schauer" <Peter.Schauer@regent.e-technik.tu-muenchen.de>
To: gdb-patches@sourceware.cygnus.com
Subject: RFA: infrun.c, breakpoint.c: Kludge for Solaris x86 hardware watchpoint support
Date: Mon, 13 Mar 2000 01:48:00 -0000
Message-id: <200003130947.KAA07528@reisser.regent.e-technik.tu-muenchen.de>
X-SW-Source: 2000-03/msg00225.html
Content-length: 2985
Unfortunately I'd need the following kludge to work around a Solaris x86
kernel problem with hardware watchpoint support.
See the comment in the patches for a description of the problem.
Any objections ?
2000-03-12 Peter Schauer <pes@regent.e-technik.tu-muenchen.de>
breakpoint.c, breakpoint.h (remove_hw_watchpoints): New function.
infrun.c (resume): Remove hardware watchpoints before stepping
when CANNOT_STEP_HW_WATCHPOINTS is nonzero.
*** gdb/breakpoint.c.orig Thu Feb 24 13:41:33 2000
--- gdb/breakpoint.c Sat Mar 4 11:42:48 2000
***************
*** 1080,1085 ****
--- 1081,1107 ----
}
int
+ remove_hw_watchpoints ()
+ {
+ register struct breakpoint *b;
+ int val;
+
+ ALL_BREAKPOINTS (b)
+ {
+ if (b->inserted
+ && (b->type == bp_hardware_watchpoint
+ || b->type == bp_read_watchpoint
+ || b->type == bp_access_watchpoint))
+ {
+ val = remove_breakpoint (b, mark_uninserted);
+ if (val != 0)
+ return val;
+ }
+ }
+ return 0;
+ }
+
+ int
reattach_breakpoints (pid)
int pid;
{
*** ./gdb/breakpoint.h.orig Thu Feb 3 05:14:27 2000
--- ./gdb/breakpoint.h Sat Mar 4 11:42:48 2000
***************
*** 562,567 ****
--- 562,568 ----
extern int insert_breakpoints PARAMS ((void));
extern int remove_breakpoints PARAMS ((void));
+ extern int remove_hw_watchpoints PARAMS ((void));
/* This function can be used to physically insert eventpoints from the
specified traced inferior process, without modifying the breakpoint
*** gdb/infrun.c.orig Thu Feb 24 13:41:46 2000
--- gdb/infrun.c Mon Mar 13 09:35:54 2000
***************
*** 296,301 ****
--- 296,308 ----
#define HAVE_CONTINUABLE_WATCHPOINT 1
#endif
+ #ifndef CANNOT_STEP_HW_WATCHPOINTS
+ #define CANNOT_STEP_HW_WATCHPOINTS 0
+ #else
+ #undef CANNOT_STEP_HW_WATCHPOINTS
+ #define CANNOT_STEP_HW_WATCHPOINTS 1
+ #endif
+
/* Tables of how to react to signals; the user sets them. */
static unsigned char *signal_stop;
***************
*** 796,801 ****
--- 803,820 ----
if (step && breakpoints_inserted && breakpoint_here_p (read_pc ()))
step = 0;
#endif
+
+ /* Some targets (e.g. Solaris x86) have a kernel bug when stepping
+ over an instruction that causes a page fault without triggering
+ a hardware watchpoint. The kernel properly notices that it shouldn't
+ stop, because the hardware watchpoint is not triggered, but it forgets
+ the step request and continues the program normally.
+ Work around the problem by removing hardware watchpoints if a step is
+ requested, GDB will check for a hardware watchpoint trigger after the
+ step anyway. */
+ if (CANNOT_STEP_HW_WATCHPOINTS && step && breakpoints_inserted)
+ remove_hw_watchpoints ();
+
/* Normally, by the time we reach `resume', the breakpoints are either
removed or inserted, as appropriate. The exception is if we're sitting
--
Peter Schauer pes@regent.e-technik.tu-muenchen.de
From ac131313@cygnus.com Mon Mar 13 02:05:00 2000
From: Andrew Cagney <ac131313@cygnus.com>
To: GDB Patches <gdb-patches@sourceware.cygnus.com>
Subject: [PATCH] Fix C++ overloading, add support for seeing through references.
Date: Mon, 13 Mar 2000 02:05:00 -0000
Message-id: <38CCBD3A.35459C1C@cygnus.com>
X-SW-Source: 2000-03/msg00227.html
Content-length: 19325
FYI,
I've committed the attatched from Daniel Berlin (except for minor
edits). It has a very interesting effect on the arm-elf -> arm-sim
testsuite results:
==> before
# of expected passes 5715
# of unexpected failures 36
# of unexpected successes 2
# of expected failures 193
# of unresolved testcases 79
# of untested testcases 18
# of unsupported tests 2
==> after
# of expected passes 5716
# of unexpected failures 36
# of unexpected successes 16
# of expected failures 178
# of unresolved testcases 79
# of untested testcases 18
# of unsupported tests 2
where the actual changes are ( ``<'' for old, ``>'' for new):
< XFAIL: gdb.c++/derivation.exp: print value of g_instance.afoo()
< XFAIL: gdb.c++/derivation.exp: print value of g_instance.bfoo()
< XFAIL: gdb.c++/derivation.exp: print value of g_instance.cfoo()
> XPASS: gdb.c++/derivation.exp: print value of g_instance.afoo()
> XPASS: gdb.c++/derivation.exp: print value of g_instance.bfoo()
> XPASS: gdb.c++/derivation.exp: print value of g_instance.cfoo()
< XFAIL: gdb.c++/overload.exp: print call overloaded func 1 arg
< XFAIL: gdb.c++/overload.exp: print call overloaded func 2 args
< XFAIL: gdb.c++/overload.exp: print call overloaded func 3 args
> XPASS: gdb.c++/overload.exp: print call overloaded func 1 arg
> XPASS: gdb.c++/overload.exp: print call overloaded func 2 args
> XPASS: gdb.c++/overload.exp: print call overloaded func 3 args
< XFAIL: gdb.c++/overload.exp: print call overloaded func void arg
> XPASS: gdb.c++/overload.exp: print call overloaded func void arg
< XFAIL: gdb.c++/overload.exp: print call overloaded func signed char
arg
< XFAIL: gdb.c++/overload.exp: print call overloaded func unsigned char
arg
> XPASS: gdb.c++/overload.exp: print call overloaded func signed char arg
> XPASS: gdb.c++/overload.exp: print call overloaded func unsigned char arg
< XFAIL: gdb.c++/overload.exp: print call overloaded func unsigned int
arg
> XPASS: gdb.c++/overload.exp: print call overloaded func unsigned int arg
< XFAIL: gdb.c++/templates.exp: print t5i.value
> PASS: gdb.c++/templates.exp: print t5i.value()
< XFAIL: gdb.c++/virtfunc.exp: print pAe->f()
< XFAIL: gdb.c++/virtfunc.exp: print pAa->f()
> XPASS: gdb.c++/virtfunc.exp: print pAe->f()
> XPASS: gdb.c++/virtfunc.exp: print pAa->f()
< XFAIL: gdb.c++/virtfunc.exp: print pDd->vg()
> XPASS: gdb.c++/virtfunc.exp: print pDd->vg()
< XFAIL: gdb.c++/virtfunc.exp: print pVB->vvb()
> XPASS: gdb.c++/virtfunc.exp: print pVB->vvb()
so fixed some long outstanding bugs.
Andrew
Mon Mar 13 18:54:42 2000 Andrew Cagney <cagney@b1.cygnus.com>
From 2000-03-10 Daniel Berlin <dan@cgsoftware.com> Fix C++
overloading, add support for seeing through references:
* valops.c (find_overload_match): Handle STABS overloading for
C++.
(find_overload_match): Look in right place for function arguments
in the debug info.
(find_overload_match): Rather than giving up when we have >1
perfect match, just choose one, especially since the
recommendation GDB gives ("disambiguate it by specifying function
signature"), is basically impossible.
(check_field_in): STREQ->strcmp_iw
(search_struct_field): STREQ->strcmp_iw
(find_method_list): STREQ->strcmp_iw
* gdbtypes.c (rank_one_type): Add ability to see through
references.
(rank_one_type): strcmp->strcmp_iw, because the whitespace could
be different.
(rank_function): Rank function properly (was doing it wrong
before, comparing the wrong parts of the arrays)
(rank_one_type): Change #if 0 to #ifdef DEBUG_OLOAD.
* gdbtypes.h: Add REFERENCE_CONVERSION_BADNESS for "badness"
associated with converting a non-reference to a reference.
* gdbtypes.c (rank_one_type): Add comment on how to eliminate the
#ifdef DEBUG_OLOAD.
Index: gdbtypes.c
===================================================================
RCS file: /cvs/src/src/gdb/gdbtypes.c,v
retrieving revision 1.3
diff -p -r1.3 gdbtypes.c
*** gdbtypes.c 2000/03/13 07:30:00 1.3
--- gdbtypes.c 2000/03/13 08:47:00
*************** lookup_struct_elt_type (type, name, noer
*** 994,1000 ****
{
char *t_field_name = TYPE_FIELD_NAME (type, i);
! if (t_field_name && STREQ (t_field_name, name))
{
return TYPE_FIELD_TYPE (type, i);
}
--- 994,1000 ----
{
char *t_field_name = TYPE_FIELD_NAME (type, i);
! if (t_field_name && (strcmp_iw (t_field_name, name) == 0))
{
return TYPE_FIELD_TYPE (type, i);
}
*************** rank_function (parms, nparms, args, narg
*** 2136,2143 ****
LENGTH_MATCH (bv) = (nargs != nparms) ? LENGTH_MISMATCH_BADNESS : 0;
/* Now rank all the parameters of the candidate function */
! for (i = 1; i <= min_len; i++)
! bv->rank[i] = rank_one_type (parms[i - 1], args[i - 1]);
/* If more arguments than parameters, add dummy entries */
for (i = min_len + 1; i <= nargs; i++)
--- 2136,2143 ----
LENGTH_MATCH (bv) = (nargs != nparms) ? LENGTH_MISMATCH_BADNESS : 0;
/* Now rank all the parameters of the candidate function */
! for (i = 1; i < min_len; i++)
! bv->rank[i] = rank_one_type (parms[i], args[i]);
/* If more arguments than parameters, add dummy entries */
for (i = min_len + 1; i <= nargs; i++)
*************** rank_one_type (parm, arg)
*** 2178,2185 ****
if (parm == arg)
return 0;
! #if 0
! /* Debugging only */
printf ("------ Arg is %s [%d], parm is %s [%d]\n",
TYPE_NAME (arg), TYPE_CODE (arg), TYPE_NAME (parm), TYPE_CODE (parm));
#endif
--- 2178,2198 ----
if (parm == arg)
return 0;
! /* See through references, since we can almost make non-references
! references. */
! if (TYPE_CODE (arg) == TYPE_CODE_REF)
! return (rank_one_type (TYPE_TARGET_TYPE (arg), parm)
! + REFERENCE_CONVERSION_BADNESS);
! if (TYPE_CODE (parm) == TYPE_CODE_REF)
! return (rank_one_type (arg, TYPE_TARGET_TYPE (parm))
! + REFERENCE_CONVERSION_BADNESS);
!
! #ifdef DEBUG_OLOAD
! /* Debugging only. */
! /* FIXME/FYI: cagney/2000-03-13: No need to #ifdef this sort of
! thing. Instead add a command like ``set debug gdbtypes <int>''.
! (A predicate to this is the addition of the ``set debug''). Also,
! send the output to gdb_stderr and don't use printf. */
printf ("------ Arg is %s [%d], parm is %s [%d]\n",
TYPE_NAME (arg), TYPE_CODE (arg), TYPE_NAME (parm), TYPE_CODE (parm));
#endif
*************** rank_one_type (parm, arg)
*** 2246,2261 ****
{
if (TYPE_UNSIGNED (arg))
{
! if (!strcmp (TYPE_NAME (parm), TYPE_NAME (arg)))
return 0; /* unsigned int -> unsigned int, or unsigned long -> unsigned long */
! else if (!strcmp (TYPE_NAME (arg), "int") && !strcmp (TYPE_NAME (parm), "long"))
return INTEGER_PROMOTION_BADNESS; /* unsigned int -> unsigned long */
else
return INTEGER_COERCION_BADNESS; /* unsigned long -> unsigned int */
}
else
{
! if (!strcmp (TYPE_NAME (arg), "long") && !strcmp (TYPE_NAME (parm), "int"))
return INTEGER_COERCION_BADNESS; /* signed long -> unsigned int */
else
return INTEGER_CONVERSION_BADNESS; /* signed int/long -> unsigned int/long */
--- 2259,2274 ----
{
if (TYPE_UNSIGNED (arg))
{
! if (!strcmp_iw (TYPE_NAME (parm), TYPE_NAME (arg)))
return 0; /* unsigned int -> unsigned int, or unsigned long -> unsigned long */
! else if (!strcmp_iw (TYPE_NAME (arg), "int") && !strcmp_iw (TYPE_NAME (parm), "long"))
return INTEGER_PROMOTION_BADNESS; /* unsigned int -> unsigned long */
else
return INTEGER_COERCION_BADNESS; /* unsigned long -> unsigned int */
}
else
{
! if (!strcmp_iw (TYPE_NAME (arg), "long") && !strcmp_iw (TYPE_NAME (parm), "int"))
return INTEGER_COERCION_BADNESS; /* signed long -> unsigned int */
else
return INTEGER_CONVERSION_BADNESS; /* signed int/long -> unsigned int/long */
*************** rank_one_type (parm, arg)
*** 2263,2271 ****
}
else if (!TYPE_NOSIGN (arg) && !TYPE_UNSIGNED (arg))
{
! if (!strcmp (TYPE_NAME (parm), TYPE_NAME (arg)))
return 0;
! else if (!strcmp (TYPE_NAME (arg), "int") && !strcmp (TYPE_NAME (parm), "long"))
return INTEGER_PROMOTION_BADNESS;
else
return INTEGER_COERCION_BADNESS;
--- 2276,2284 ----
}
else if (!TYPE_NOSIGN (arg) && !TYPE_UNSIGNED (arg))
{
! if (!strcmp_iw (TYPE_NAME (parm), TYPE_NAME (arg)))
return 0;
! else if (!strcmp_iw (TYPE_NAME (arg), "int") && !strcmp_iw (TYPE_NAME (parm), "long"))
return INTEGER_PROMOTION_BADNESS;
else
return INTEGER_COERCION_BADNESS;
Index: gdbtypes.h
===================================================================
RCS file: /cvs/src/src/gdb/gdbtypes.h,v
retrieving revision 1.3
diff -p -r1.3 gdbtypes.h
*** gdbtypes.h 2000/03/13 07:30:00 1.3
--- gdbtypes.h 2000/03/13 08:47:03
*************** count_virtual_fns PARAMS ((struct type *
*** 1129,1136 ****
#define POINTER_CONVERSION_BADNESS 2
/* Badness of conversion of pointer to void pointer */
#define VOID_PTR_CONVERSION_BADNESS 2
! /* Badness of convering derived to base class */
#define BASE_CONVERSION_BADNESS 2
/* Non-standard conversions allowed by the debugger */
/* Converting a pointer to an int is usually OK */
--- 1129,1138 ----
#define POINTER_CONVERSION_BADNESS 2
/* Badness of conversion of pointer to void pointer */
#define VOID_PTR_CONVERSION_BADNESS 2
! /* Badness of converting derived to base class */
#define BASE_CONVERSION_BADNESS 2
+ /* Badness of converting from non-reference to reference */
+ #define REFERENCE_CONVERSION_BADNESS 2
/* Non-standard conversions allowed by the debugger */
/* Converting a pointer to an int is usually OK */
Index: valops.c
===================================================================
RCS file: /cvs/src/src/gdb/valops.c,v
retrieving revision 1.5
diff -p -r1.5 valops.c
*** valops.c 2000/03/13 07:30:00 1.5
--- valops.c 2000/03/13 08:47:19
*************** search_struct_field (name, arg1, offset,
*** 2068,2074 ****
{
char *t_field_name = TYPE_FIELD_NAME (type, i);
! if (t_field_name && STREQ (t_field_name, name))
{
value_ptr v;
if (TYPE_FIELD_STATIC (type, i))
--- 2068,2074 ----
{
char *t_field_name = TYPE_FIELD_NAME (type, i);
! if (t_field_name && (strcmp_iw (t_field_name, name) == 0))
{
value_ptr v;
if (TYPE_FIELD_STATIC (type, i))
*************** search_struct_field (name, arg1, offset,
*** 2083,2089 ****
if (t_field_name
&& (t_field_name[0] == '\0'
|| (TYPE_CODE (type) == TYPE_CODE_UNION
! && STREQ (t_field_name, "else"))))
{
struct type *field_type = TYPE_FIELD_TYPE (type, i);
if (TYPE_CODE (field_type) == TYPE_CODE_UNION
--- 2083,2089 ----
if (t_field_name
&& (t_field_name[0] == '\0'
|| (TYPE_CODE (type) == TYPE_CODE_UNION
! && (strcmp_iw (t_field_name, "else") == 0))))
{
struct type *field_type = TYPE_FIELD_TYPE (type, i);
if (TYPE_CODE (field_type) == TYPE_CODE_UNION
*************** search_struct_field (name, arg1, offset,
*** 2128,2134 ****
is not yet filled in. */
int found_baseclass = (looking_for_baseclass
&& TYPE_BASECLASS_NAME (type, i) != NULL
! && STREQ (name, TYPE_BASECLASS_NAME (type, i)));
if (BASETYPE_VIA_VIRTUAL (type, i))
{
--- 2128,2134 ----
is not yet filled in. */
int found_baseclass = (looking_for_baseclass
&& TYPE_BASECLASS_NAME (type, i) != NULL
! && (strcmp_iw (name, TYPE_BASECLASS_NAME (type, i)) == 0));
if (BASETYPE_VIA_VIRTUAL (type, i))
{
*************** search_struct_method (name, arg1p, args,
*** 2314,2320 ****
else if (cplus_demangle_opname (t_field_name, dem_opname, 0))
t_field_name = dem_opname;
}
! if (t_field_name && STREQ (t_field_name, name))
{
int j = TYPE_FN_FIELDLIST_LENGTH (type, i) - 1;
struct fn_field *f = TYPE_FN_FIELDLIST1 (type, i);
--- 2314,2320 ----
else if (cplus_demangle_opname (t_field_name, dem_opname, 0))
t_field_name = dem_opname;
}
! if (t_field_name && (strcmp_iw (t_field_name, name) == 0))
{
int j = TYPE_FN_FIELDLIST_LENGTH (type, i) - 1;
struct fn_field *f = TYPE_FN_FIELDLIST1 (type, i);
*************** find_method_list (argp, method, offset,
*** 2570,2576 ****
{
/* pai: FIXME What about operators and type conversions? */
char *fn_field_name = TYPE_FN_FIELDLIST_NAME (type, i);
! if (fn_field_name && STREQ (fn_field_name, method))
{
*num_fns = TYPE_FN_FIELDLIST_LENGTH (type, i);
*basetype = type;
--- 2570,2576 ----
{
/* pai: FIXME What about operators and type conversions? */
char *fn_field_name = TYPE_FN_FIELDLIST_NAME (type, i);
! if (fn_field_name && (strcmp_iw (fn_field_name, method) == 0))
{
*num_fns = TYPE_FN_FIELDLIST_LENGTH (type, i);
*basetype = type;
*************** find_overload_match (arg_types, nargs, n
*** 2740,2745 ****
--- 2740,2748 ----
/* Get the list of overloaded methods or functions */
if (method)
{
+ int i;
+ int len;
+ struct type *domain;
obj_type_name = TYPE_NAME (VALUE_TYPE (obj));
/* Hack: evaluate_subexp_standard often passes in a pointer
value rather than the object itself, so try again */
*************** find_overload_match (arg_types, nargs, n
*** 2756,2761 ****
--- 2759,2784 ----
obj_type_name,
(obj_type_name && *obj_type_name) ? "::" : "",
name);
+ domain = TYPE_DOMAIN_TYPE (fns_ptr[0].type);
+ len = TYPE_NFN_FIELDS (domain);
+ /* NOTE: dan/2000-03-10: This stuff is for STABS, which won't
+ give us the info we need directly in the types. We have to
+ use the method stub conversion to get it. Be aware that this
+ is by no means perfect, and if you use STABS, please move to
+ DWARF-2, or something like it, because trying to improve
+ overloading using STABS is really a waste of time. */
+ for (i = 0; i < len; i++)
+ {
+ int j;
+ struct fn_field *f = TYPE_FN_FIELDLIST1 (domain, i);
+ int len2 = TYPE_FN_FIELDLIST_LENGTH (domain, i);
+
+ for (j = 0; j < len2; j++)
+ {
+ if (TYPE_FN_FIELD_STUB (f, j))
+ check_stub_method (domain, i, j);
+ }
+ }
}
else
{
*************** find_overload_match (arg_types, nargs, n
*** 2782,2795 ****
/* Consider each candidate in turn */
for (ix = 0; ix < num_fns; ix++)
{
! /* Number of parameters for current candidate */
! nparms = method ? TYPE_NFIELDS (fns_ptr[ix].type)
! : TYPE_NFIELDS (SYMBOL_TYPE (oload_syms[ix]));
/* Prepare array of parameter types */
parm_types = (struct type **) xmalloc (nparms * (sizeof (struct type *)));
for (jj = 0; jj < nparms; jj++)
! parm_types[jj] = method ? TYPE_FIELD_TYPE (fns_ptr[ix].type, jj)
: TYPE_FIELD_TYPE (SYMBOL_TYPE (oload_syms[ix]), jj);
/* Compare parameter types to supplied argument types */
--- 2805,2832 ----
/* Consider each candidate in turn */
for (ix = 0; ix < num_fns; ix++)
{
! if (method)
! {
! /* For static member functions, we won't have a this pointer, but nothing
! else seems to handle them right now, so we just pretend ourselves */
! nparms=0;
+ if (TYPE_FN_FIELD_ARGS(fns_ptr,ix))
+ {
+ while (TYPE_CODE(TYPE_FN_FIELD_ARGS(fns_ptr,ix)[nparms]) != TYPE_CODE_VOID)
+ nparms++;
+ }
+ }
+ else
+ {
+ /* If it's not a method, this is the proper place */
+ nparms=TYPE_NFIELDS(SYMBOL_TYPE(oload_syms[ix]));
+ }
+
/* Prepare array of parameter types */
parm_types = (struct type **) xmalloc (nparms * (sizeof (struct type *)));
for (jj = 0; jj < nparms; jj++)
! parm_types[jj] = method ? (TYPE_FN_FIELD_ARGS(fns_ptr,ix)[jj])
: TYPE_FIELD_TYPE (SYMBOL_TYPE (oload_syms[ix]), jj);
/* Compare parameter types to supplied argument types */
*************** find_overload_match (arg_types, nargs, n
*** 2826,2841 ****
}
free (parm_types);
#ifdef DEBUG_OLOAD
if (method)
printf ("Overloaded method instance %s, # of parms %d\n", fns_ptr[ix].physname, nparms);
else
printf ("Overloaded function instance %s # of parms %d\n", SYMBOL_DEMANGLED_NAME (oload_syms[ix]), nparms);
! for (jj = 0; jj <= nargs; jj++)
printf ("...Badness @ %d : %d\n", jj, bv->rank[jj]);
printf ("Overload resolution champion is %d, ambiguous? %d\n", oload_champ, oload_ambiguous);
#endif
} /* end loop over all candidates */
if (oload_ambiguous)
{
if (method)
--- 2863,2885 ----
}
free (parm_types);
#ifdef DEBUG_OLOAD
+ /* FIXME: cagney/2000-03-12: Send the output to gdb_stderr. See
+ comments above about adding a ``set debug'' command. */
if (method)
printf ("Overloaded method instance %s, # of parms %d\n", fns_ptr[ix].physname, nparms);
else
printf ("Overloaded function instance %s # of parms %d\n", SYMBOL_DEMANGLED_NAME (oload_syms[ix]), nparms);
! for (jj = 0; jj < nargs; jj++)
printf ("...Badness @ %d : %d\n", jj, bv->rank[jj]);
printf ("Overload resolution champion is %d, ambiguous? %d\n", oload_champ, oload_ambiguous);
#endif
} /* end loop over all candidates */
+ /* NOTE: dan/2000-03-10: Seems to be a better idea to just pick one
+ if they have the exact same goodness. This is because there is no
+ way to differentiate based on return type, which we need to in
+ cases like overloads of .begin() <It's both const and non-const> */
+ #if 0
if (oload_ambiguous)
{
if (method)
*************** find_overload_match (arg_types, nargs, n
*** 2847,2852 ****
--- 2891,2897 ----
error ("Cannot resolve overloaded function %s to unique instance; disambiguate by specifying function signature",
func_name);
}
+ #endif
/* Check how bad the best match is */
for (ix = 1; ix <= nargs; ix++)
*************** check_field_in (type, name)
*** 2943,2949 ****
for (i = TYPE_NFIELDS (type) - 1; i >= TYPE_N_BASECLASSES (type); i--)
{
char *t_field_name = TYPE_FIELD_NAME (type, i);
! if (t_field_name && STREQ (t_field_name, name))
return 1;
}
--- 2988,2994 ----
for (i = TYPE_NFIELDS (type) - 1; i >= TYPE_N_BASECLASSES (type); i--)
{
char *t_field_name = TYPE_FIELD_NAME (type, i);
! if (t_field_name && (strcmp_iw (t_field_name, name) == 0))
return 1;
}
*************** check_field_in (type, name)
*** 2960,2966 ****
for (i = TYPE_NFN_FIELDS (type) - 1; i >= 0; --i)
{
! if (STREQ (TYPE_FN_FIELDLIST_NAME (type, i), name))
return 1;
}
--- 3005,3011 ----
for (i = TYPE_NFN_FIELDS (type) - 1; i >= 0; --i)
{
! if (strcmp_iw (TYPE_FN_FIELDLIST_NAME (type, i), name) == 0)
return 1;
}
From ac131313@cygnus.com Mon Mar 13 02:51:00 2000
From: Andrew Cagney <ac131313@cygnus.com>
To: GDB Patches <gdb-patches@sourceware.cygnus.com>
Subject: [RFC] Notes on QUIT and STREQ et.al.
Date: Mon, 13 Mar 2000 02:51:00 -0000
Message-id: <38CCC819.1071F28E@cygnus.com>
X-SW-Source: 2000-03/msg00228.html
Content-length: 1709
The attatched spells out the long term prospects of both STREQ et.al.
and QUIT.
Look OK to everyone?
Andrew
Mon Mar 13 21:21:41 2000 Andrew Cagney <cagney@b1.cygnus.com>
* defs.h (STREQ): Note that the STR* macros do not need to be
used.
(QUIT): Note that this can probably be replaced by a function.
Index: defs.h
===================================================================
RCS file: /cvs/src/src/gdb/defs.h,v
retrieving revision 1.11
diff -p -r1.11 defs.h
*** defs.h 2000/03/13 07:30:00 1.11
--- defs.h 2000/03/13 10:24:00
*************** extern int core_addr_greaterthan (CORE_A
*** 120,125 ****
--- 120,130 ----
/* Gdb does *lots* of string compares. Use macros to speed them up by
avoiding function calls if the first characters are not the same. */
+ /* NOTE: cagney/2000-03-13: There is no reason for using these macros
+ in new code (which is just short of marking them as deprecated).
+ While old code can continue to refer to them, new code is better
+ off using the more familar strcmp(). */
+
#define STRCMP(a,b) (*(a) == *(b) ? strcmp ((a), (b)) : (int)*(a) - (int)*(b))
#define STREQ(a,b) (*(a) == *(b) ? !strcmp ((a), (b)) : 0)
#define STREQN(a,b,c) (*(a) == *(b) ? !strncmp ((a), (b), (c)) : 0)
*************** extern int immediate_quit;
*** 152,157 ****
--- 157,167 ----
extern int sevenbit_strings;
extern void quit (void);
+
+ /* FIXME: cagney/2000-03-13: It has been suggested that the peformance
+ benefits of having a ``QUIT'' macro rather than a function are
+ marginal. Before QUIT can be replaced by a function, a profile
+ confirming this, would be needed. */
#ifdef QUIT
/* do twice to force compiler warning */
From kettenis@wins.uva.nl Mon Mar 13 06:12:00 2000
From: Mark Kettenis <kettenis@wins.uva.nl>
To: ac131313@cygnus.com
Cc: gdb-patches@sourceware.cygnus.com
Subject: Re: [RFC] Notes on QUIT and STREQ et.al.
Date: Mon, 13 Mar 2000 06:12:00 -0000
Message-id: <200003131412.PAA16094@landau.wins.uva.nl>
References: <38CCC819.1071F28E@cygnus.com>
X-SW-Source: 2000-03/msg00229.html
Content-length: 573
Date: Mon, 13 Mar 2000 21:51:05 +1100
From: Andrew Cagney <ac131313@cygnus.com>
The attatched spells out the long term prospects of both STREQ et.al.
and QUIT.
Look OK to everyone?
Well, STRCMP really doesn't make any sense. A decent compiler in
combination with appropriate headers will take care of the
optimization.
I'm not sure if we want STREQ to go. I think that `STREQ (a, b)' is
both easier to read and easier to type than `strcmp (a, b) == 0'.
There are quite a few GNU projects that use exactly the same macro in
exactly the same way.
Mark
^ permalink raw reply [flat|nested] 2+ messages in thread