[lttng-dev] [PATCH lttng-tools 2/9] Fix: tests: error handling in high throughput limits test

[mathieu.desnoyers@efficios.com (Mathieu Desnoyers)]

----- On May 15, 2019, at 12:31 PM, Jonathan Rajotte jonathan.rajotte-julien at efficios.com wrote:

>> @@ -168,8 +187,7 @@ skip $isroot "Root access is needed to set bandwith limits.
>> Skipping all tests."
>>  {
>>  
>>  	# Catch sigint and try to cleanup limits
>> -	trap interrupt_cleanup SIGTERM
>> -	trap interrupt_cleanup SIGINT
>> +	trap interrupt_cleanup SIGTERM SIGINT
>>  
>>  	BW_LIMITS=(3200 1600 800 400 200 100 50 25)
>>  	for BW in ${BW_LIMITS[@]};
>> @@ -177,6 +195,7 @@ skip $isroot "Root access is needed to set bandwith limits.
>> Skipping all tests."
>>  		diag "Test high-throughput with bandwidth limit set to ${BW}kbits"
>>  
>>  		set_bw_limit $BW
>> +		ok $? "Setting bandwidth limit"
> 
> In case of failure here we should force a reset since it could lead to long
> timeout/hang depending on which tc command failed?
> 
> This could also be done inside set_bw_limit at each stage.

I'll do this. Will be in v2 of this patch.

Thanks,

Mathieu

> 
>>  
>>  		start_lttng_sessiond
>>  		start_lttng_relayd "-o $TRACE_PATH"
>> @@ -185,5 +204,6 @@ skip $isroot "Root access is needed to set bandwith limits.
>> Skipping all tests."
>>  		stop_lttng_relayd
>>  		stop_lttng_sessiond
>>  		reset_bw_limit
>> +		ok $? "Reset bandwith limits"
>>  	done
>>  }
>> --
>> 2.11.0
>> 
> 
> --
> Jonathan Rajotte-Julien
> EfficiOS

-- 
Mathieu Desnoyers
EfficiOS Inc.
http://www.efficios.com