Mirror of the lttng-dev mailing list
 help / color / mirror / Atom feed
From: david.goulet@polymtl.ca (David Goulet)
Subject: [ltt-dev] liburcu cache line size
Date: Tue, 17 Aug 2010 15:06:18 -0400	[thread overview]
Message-ID: <4C6ADDAA.6020408@polymtl.ca> (raw)
In-Reply-To: <20100817185122.GA4384@Krystal>



On 10-08-17 02:51 PM, Mathieu Desnoyers wrote:
> * David Goulet (david.goulet at polymtl.ca) wrote:
>> Hi,
>>
>> I have some doubt about the value of #define CACHE_LINE_SIZE
>> (urcu/arch_x86.h) that is set to 128.
>>
>> After some research and looking on my computer, the x86 architecture
>> seems to have most of the time 64 bytes size. On my i7 920, here's what
>> I have :
>>
>> # getconf LEVEL1_DCACHE_LINESIZE
>> 64
>>
>> # cat /sys/devices/system/cpu/cpu0/cache/index0/coherency_line_size
>> 64
>>
>> Since the Intel NetBurst microarch., the Intel manual says 64 bytes also
>> and it has not changed apparently for Nehalem.
>>
>> So, Mathieu, why 128 bytes? UST is using that, if it's the wrong value
>> here for x86, it could have an effect on cache pressure since 2 lines
>> are required for structure less then 64 bytes.
>
> See Linux kernel source:
>
> arch/x86/Kconfig.cpu
>
> #
> # Define implied options from the CPU selection here
> config X86_INTERNODE_CACHE_SHIFT
>          int
>          default "12" if X86_VSMP
>          default "7" if NUMA
>          default X86_L1_CACHE_SHIFT
>
> and
>
> config X86_L1_CACHE_SHIFT
>          int
>          default "7" if MPENTIUM4 || MPSC
>          default "6" if MK7 || MK8 || MPENTIUMM || MCORE2 || MATOM ||
> MVIAC7 || X86_GENERIC || GENERIC_CPU
>          default "4" if X86_ELAN || M486 || M386 || MGEODEGX1
>          default "5" if MWINCHIP3D || MWINCHIPC6 || MCRUSOE || MEFFICEON
> || MCYRIXIII || MK6 || MPENTIUMIII || MPENTIUMII || M686 || M586MMX ||
> M586TSC || M586 || MVIAC3_2 || MGEODE_LX
>
> So Pentium 4 seems to have 128 bytes cache lines.
>

Yep I saw that and this is why I'm asking because only NUMA, P4 and vSMP 
machines are bigger then 64 bytes. The rest is 64 bytes (X86 generic, 
Core 2(Nehalem), Atom).

So you are saying that you prefer use 128 bytes knowing that most of X86 
is lower or equal to 64 bytes?

> Hopefully the ScaleMP vSMP machine are rare enough (they would require a
> 4k alignment).
>
> NUMA is not that rare, and requires 128 bytes cache lines too.
>
> Can you send a patch for userspace RCU that documents this briefly in
> urcu/arch_x86.h ? (just a summary of the info I pasted here would be
> fine)
>
> Thanks,
>
> Mathieu
>
>
>
>
>
>>
>> Thanks!
>> --
>> David Goulet
>> LTTng project, DORSAL Lab.
>>
>> PGP/GPG : 1024D/16BD8563
>> BE3C 672B 9331 9796 291A  14C6 4AF7 C14B 16BD 8563
>>
>> _______________________________________________
>> ltt-dev mailing list
>> ltt-dev at lists.casi.polymtl.ca
>> http://lists.casi.polymtl.ca/cgi-bin/mailman/listinfo/ltt-dev
>>
>

-- 
David Goulet
LTTng project, DORSAL Lab.

PGP/GPG : 1024D/16BD8563
BE3C 672B 9331 9796 291A  14C6 4AF7 C14B 16BD 8563




  reply	other threads:[~2010-08-17 19:06 UTC|newest]

Thread overview: 15+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2010-08-17 18:30 David Goulet
2010-08-17 18:51 ` Mathieu Desnoyers
2010-08-17 19:06   ` David Goulet [this message]
2010-08-17 19:45     ` Mathieu Desnoyers
2010-08-17 19:54       ` Mathieu Desnoyers
2010-08-17 20:04         ` Alexandre Montplaisir
2010-08-17 20:27           ` Mathieu Desnoyers
2010-08-17 20:36             ` Alexandre Montplaisir
2010-08-17 20:53               ` Mathieu Desnoyers
2010-08-17 19:58       ` David Goulet
2010-08-17 20:24         ` Mathieu Desnoyers
2010-08-17 20:40           ` David Goulet
2010-08-17 20:51             ` Mathieu Desnoyers
2010-08-17 20:53               ` David Goulet
2010-08-17 20:55                 ` Mathieu Desnoyers

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=4C6ADDAA.6020408@polymtl.ca \
    --to=david.goulet@polymtl.ca \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox