* [ltt-dev] LTTng Build issue
@ 2010-09-14 13:39 srimanta panda
2010-09-14 13:39 ` srimanta panda
` (2 more replies)
0 siblings, 3 replies; 8+ messages in thread
From: srimanta panda @ 2010-09-14 13:39 UTC (permalink / raw)
Hi,
?
I am quite new to this LLTng.
I am trying to build the Kernel 2.6.34 with the ltt patch .221 for ARM platform. Its gives me link error related to the? trace-clock functionalities.
I tried to figured out and found that it is not able to compile the trace-clock.c because of some flag HAVE_TRACE_CLOCK_GENERIC, which is present in the KConfig of the init folder.
?
I tried to enable the flag in the "kernel.spec", but is not able to set it because it is inside of menuconfig for CGROUPS. If I enable CGROUPS, it tells me to disable some other flags which I have no idea it is correct to do so.
?
I saw the previous patches for the kernel 2.6.33 and found that the HAVE_TRACE_CLOCK and HAVE_TRACE_CLOCK_GENERIC is added in different locations. It was not inside CGROUP menuconfig.
?
I wondering if the two flags have been added in the wrong place in the new patch .221??
?
Can you please help me out if I am doing any thing wrong to set the trace-clock?
--
Cheers,
Srimanta
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.casi.polymtl.ca/pipermail/lttng-dev/attachments/20100914/2e744a7c/attachment-0003.htm>
^ permalink raw reply [flat|nested] 8+ messages in thread* [ltt-dev] LTTng Build issue
2010-09-14 13:39 [ltt-dev] LTTng Build issue srimanta panda
@ 2010-09-14 13:39 ` srimanta panda
2010-09-14 13:39 ` srimanta panda
2010-09-14 15:52 ` Mathieu Desnoyers
2 siblings, 0 replies; 8+ messages in thread
From: srimanta panda @ 2010-09-14 13:39 UTC (permalink / raw)
Hi,
?
I am quite new to this LLTng.
I am trying to build the Kernel 2.6.34 with the ltt patch .221 for ARM platform. Its gives me link error related to the? trace-clock functionalities.
I tried to figured out and found that it is not able to compile the trace-clock.c because of some flag HAVE_TRACE_CLOCK_GENERIC, which is present in the KConfig of the init folder.
?
I tried to enable the flag in the "kernel.spec", but is not able to set it because it is inside of menuconfig for CGROUPS. If I enable CGROUPS, it tells me to disable some other flags which I have no idea it is correct to do so.
?
I saw the previous patches for the kernel 2.6.33 and found that the HAVE_TRACE_CLOCK and HAVE_TRACE_CLOCK_GENERIC is added in different locations. It was not inside CGROUP menuconfig.
?
I wondering if the two flags have been added in the wrong place in the new patch .221??
?
Can you please help me out if I am doing any thing wrong to set the trace-clock?
--
Cheers,
Srimanta
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.casi.polymtl.ca/pipermail/ltt-dev/attachments/20100914/2e744a7c/attachment.htm>
^ permalink raw reply [flat|nested] 8+ messages in thread
* [ltt-dev] LTTng Build issue
2010-09-14 13:39 [ltt-dev] LTTng Build issue srimanta panda
2010-09-14 13:39 ` srimanta panda
@ 2010-09-14 13:39 ` srimanta panda
2010-09-14 15:52 ` Mathieu Desnoyers
2 siblings, 0 replies; 8+ messages in thread
From: srimanta panda @ 2010-09-14 13:39 UTC (permalink / raw)
Hi,
?
I am quite new to this LLTng.
I am trying to build the Kernel 2.6.34 with the ltt patch .221 for ARM platform. Its gives me link error related to the? trace-clock functionalities.
I tried to figured out and found that it is not able to compile the trace-clock.c because of some flag HAVE_TRACE_CLOCK_GENERIC, which is present in the KConfig of the init folder.
?
I tried to enable the flag in the "kernel.spec", but is not able to set it because it is inside of menuconfig for CGROUPS. If I enable CGROUPS, it tells me to disable some other flags which I have no idea it is correct to do so.
?
I saw the previous patches for the kernel 2.6.33 and found that the HAVE_TRACE_CLOCK and HAVE_TRACE_CLOCK_GENERIC is added in different locations. It was not inside CGROUP menuconfig.
?
I wondering if the two flags have been added in the wrong place in the new patch .221??
?
Can you please help me out if I am doing any thing wrong to set the trace-clock?
--
Cheers,
Srimanta
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.casi.polymtl.ca/pipermail/lttng-dev/attachments/20100914/2e744a7c/attachment-0002.htm>
^ permalink raw reply [flat|nested] 8+ messages in thread
* [ltt-dev] LTTng Build issue
2010-09-14 13:39 [ltt-dev] LTTng Build issue srimanta panda
2010-09-14 13:39 ` srimanta panda
2010-09-14 13:39 ` srimanta panda
@ 2010-09-14 15:52 ` Mathieu Desnoyers
2010-09-14 16:04 ` Mathieu Desnoyers
2 siblings, 1 reply; 8+ messages in thread
From: Mathieu Desnoyers @ 2010-09-14 15:52 UTC (permalink / raw)
* srimanta panda (panda_srimanta at yahoo.co.in) wrote:
> Hi,
> ?
> I am quite new to this LLTng.
> I am trying to build the Kernel 2.6.34 with the ltt patch .221 for ARM platform. Its gives me link error related to the? trace-clock functionalities.
> I tried to figured out and found that it is not able to compile the trace-clock.c because of some flag HAVE_TRACE_CLOCK_GENERIC, which is present in the KConfig of the init folder.
> ?
> I tried to enable the flag in the "kernel.spec", but is not able to set it because it is inside of menuconfig for CGROUPS. If I enable CGROUPS, it tells me to disable some other flags which I have no idea it is correct to do so.
> ?
> I saw the previous patches for the kernel 2.6.33 and found that the HAVE_TRACE_CLOCK and HAVE_TRACE_CLOCK_GENERIC is added in different locations. It was not inside CGROUP menuconfig.
> ?
> I wondering if the two flags have been added in the wrong place in the new patch .221??
> ?
> Can you please help me out if I am doing any thing wrong to set the trace-clock?
You are very certainly right. I'll look into this and come up with a
fix.
Thanks for reporting the problem
Mathieu
>
> --
> Cheers,
> Srimanta
>
> _______________________________________________
> ltt-dev mailing list
> ltt-dev at lists.casi.polymtl.ca
> http://lists.casi.polymtl.ca/cgi-bin/mailman/listinfo/ltt-dev
--
Mathieu Desnoyers
Operating System Efficiency R&D Consultant
EfficiOS Inc.
http://www.efficios.com
^ permalink raw reply [flat|nested] 8+ messages in thread
* [ltt-dev] LTTng Build issue
2010-09-14 15:52 ` Mathieu Desnoyers
@ 2010-09-14 16:04 ` Mathieu Desnoyers
0 siblings, 0 replies; 8+ messages in thread
From: Mathieu Desnoyers @ 2010-09-14 16:04 UTC (permalink / raw)
* Mathieu Desnoyers (compudj at krystal.dyndns.org) wrote:
> * srimanta panda (panda_srimanta at yahoo.co.in) wrote:
> > Hi,
> > ?
> > I am quite new to this LLTng.
> > I am trying to build the Kernel 2.6.34 with the ltt patch .221 for ARM platform. Its gives me link error related to the? trace-clock functionalities.
> > I tried to figured out and found that it is not able to compile the trace-clock.c because of some flag HAVE_TRACE_CLOCK_GENERIC, which is present in the KConfig of the init folder.
> > ?
> > I tried to enable the flag in the "kernel.spec", but is not able to set it because it is inside of menuconfig for CGROUPS. If I enable CGROUPS, it tells me to disable some other flags which I have no idea it is correct to do so.
> > ?
> > I saw the previous patches for the kernel 2.6.33 and found that the HAVE_TRACE_CLOCK and HAVE_TRACE_CLOCK_GENERIC is added in different locations. It was not inside CGROUP menuconfig.
> > ?
> > I wondering if the two flags have been added in the wrong place in the new patch .221??
> > ?
> > Can you please help me out if I am doing any thing wrong to set the trace-clock?
>
> You are very certainly right. I'll look into this and come up with a
> fix.
>
> Thanks for reporting the problem
>
> Mathieu
>
Can you check if this fix works for you ?
trace clock kconfig options were incorrectly in cgroups menu (rebase error)
Signed-off-by: Mathieu Desnoyers <mathieu.desnoyers at efficios.com>
---
init/Kconfig | 70 +++++++++++++++++++++++++++++------------------------------
1 file changed, 35 insertions(+), 35 deletions(-)
Index: linux-2.6-lttng/init/Kconfig
===================================================================
--- linux-2.6-lttng.orig/init/Kconfig
+++ linux-2.6-lttng/init/Kconfig
@@ -590,41 +590,6 @@ config CGROUP_MEM_RES_CTLR_SWAP
Now, memory usage of swap_cgroup is 2 bytes per entry. If swap page
size is 4096bytes, 512k per 1Gbytes of swap.
-#
-# Architectures with a 64-bits get_cycles() should select this.
-# They should also define
-# get_cycles_barrier() : instruction synchronization barrier if required
-# get_cycles_rate() : cycle counter rate, in HZ. If 0, TSC are not synchronized
-# across CPUs or their frequency may vary due to frequency scaling.
-#
-config HAVE_GET_CYCLES
- def_bool n
-
-#
-# Architectures with a specialized tracing clock should select this.
-#
-config HAVE_TRACE_CLOCK
- def_bool n
-
-config HAVE_TRACE_CLOCK_GENERIC
- bool
- default y if (!HAVE_TRACE_CLOCK)
- default n if HAVE_TRACE_CLOCK
- select HAVE_TRACE_CLOCK_32_TO_64 if (!64BIT)
-
-#
-# Architectures with only a 32-bits clock source should select this.
-#
-config HAVE_TRACE_CLOCK_32_TO_64
- def_bool n
-
-#
-# Architectures which need to dynamically detect if their TSC is unsynchronized
-# across cpus should select this.
-#
-config HAVE_UNSYNCHRONIZED_TSC
- def_bool n
-
menuconfig CGROUP_SCHED
bool "Group CPU scheduler"
depends on EXPERIMENTAL && CGROUPS
@@ -683,6 +648,41 @@ config DEBUG_BLK_CGROUP
endif # CGROUPS
+#
+# Architectures with a 64-bits get_cycles() should select this.
+# They should also define
+# get_cycles_barrier() : instruction synchronization barrier if required
+# get_cycles_rate() : cycle counter rate, in HZ. If 0, TSC are not synchronized
+# across CPUs or their frequency may vary due to frequency scaling.
+#
+config HAVE_GET_CYCLES
+ def_bool n
+
+#
+# Architectures with a specialized tracing clock should select this.
+#
+config HAVE_TRACE_CLOCK
+ def_bool n
+
+config HAVE_TRACE_CLOCK_GENERIC
+ bool
+ default y if (!HAVE_TRACE_CLOCK)
+ default n if HAVE_TRACE_CLOCK
+ select HAVE_TRACE_CLOCK_32_TO_64 if (!64BIT)
+
+#
+# Architectures with only a 32-bits clock source should select this.
+#
+config HAVE_TRACE_CLOCK_32_TO_64
+ def_bool n
+
+#
+# Architectures which need to dynamically detect if their TSC is unsynchronized
+# across cpus should select this.
+#
+config HAVE_UNSYNCHRONIZED_TSC
+ def_bool n
+
config MM_OWNER
bool
--
Mathieu Desnoyers
Operating System Efficiency R&D Consultant
EfficiOS Inc.
http://www.efficios.com
^ permalink raw reply [flat|nested] 8+ messages in thread
* [ltt-dev] LTTng Build issue
@ 2010-09-14 8:35 Srimanta Panda
2010-09-14 8:35 ` Srimanta Panda
2010-09-14 8:35 ` Srimanta Panda
0 siblings, 2 replies; 8+ messages in thread
From: Srimanta Panda @ 2010-09-14 8:35 UTC (permalink / raw)
Hi,
I am quite new to this LLTng.
I am trying to build the Kernel 2.6.34 with the ltt patch .221 for ARM
platform. Its gives me link error related to the trace-clock
functionalities.
I tried to figured out and found that it is not able to compile the
trace-clock.c because of some flag HAVE_TRACE_CLOCK_GENERIC, which is
present in the KConfig of the init folder.
I tried to enable the flag in the "kernel.spec", but is not able to set it
because it is inside of menuconfig for CGROUPS. If I enable CGROUPS, it
tells me to disable some other flags which I have no idea it is correct to
do so.
I saw the previous patches for the kernel 2.6.33 and found that the
HAVE_TRACE_CLOCK and HAVE_TRACE_CLOCK_GENERIC is added in different
locations. It was not inside CGROUP menuconfig.
I wondering if the two flags have been added in the wrong place in the new
patch .221??
Can you please help me out if I am doing any thing wrong to set
the trace-clock?
--
Cheers,
Srimanta
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.casi.polymtl.ca/pipermail/lttng-dev/attachments/20100914/185b5256/attachment-0002.htm>
^ permalink raw reply [flat|nested] 8+ messages in thread
* [ltt-dev] LTTng Build issue
2010-09-14 8:35 Srimanta Panda
@ 2010-09-14 8:35 ` Srimanta Panda
2010-09-14 8:35 ` Srimanta Panda
1 sibling, 0 replies; 8+ messages in thread
From: Srimanta Panda @ 2010-09-14 8:35 UTC (permalink / raw)
Hi,
I am quite new to this LLTng.
I am trying to build the Kernel 2.6.34 with the ltt patch .221 for ARM
platform. Its gives me link error related to the trace-clock
functionalities.
I tried to figured out and found that it is not able to compile the
trace-clock.c because of some flag HAVE_TRACE_CLOCK_GENERIC, which is
present in the KConfig of the init folder.
I tried to enable the flag in the "kernel.spec", but is not able to set it
because it is inside of menuconfig for CGROUPS. If I enable CGROUPS, it
tells me to disable some other flags which I have no idea it is correct to
do so.
I saw the previous patches for the kernel 2.6.33 and found that the
HAVE_TRACE_CLOCK and HAVE_TRACE_CLOCK_GENERIC is added in different
locations. It was not inside CGROUP menuconfig.
I wondering if the two flags have been added in the wrong place in the new
patch .221??
Can you please help me out if I am doing any thing wrong to set
the trace-clock?
--
Cheers,
Srimanta
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.casi.polymtl.ca/pipermail/ltt-dev/attachments/20100914/185b5256/attachment.htm>
^ permalink raw reply [flat|nested] 8+ messages in thread
* [ltt-dev] LTTng Build issue
2010-09-14 8:35 Srimanta Panda
2010-09-14 8:35 ` Srimanta Panda
@ 2010-09-14 8:35 ` Srimanta Panda
1 sibling, 0 replies; 8+ messages in thread
From: Srimanta Panda @ 2010-09-14 8:35 UTC (permalink / raw)
Hi,
I am quite new to this LLTng.
I am trying to build the Kernel 2.6.34 with the ltt patch .221 for ARM
platform. Its gives me link error related to the trace-clock
functionalities.
I tried to figured out and found that it is not able to compile the
trace-clock.c because of some flag HAVE_TRACE_CLOCK_GENERIC, which is
present in the KConfig of the init folder.
I tried to enable the flag in the "kernel.spec", but is not able to set it
because it is inside of menuconfig for CGROUPS. If I enable CGROUPS, it
tells me to disable some other flags which I have no idea it is correct to
do so.
I saw the previous patches for the kernel 2.6.33 and found that the
HAVE_TRACE_CLOCK and HAVE_TRACE_CLOCK_GENERIC is added in different
locations. It was not inside CGROUP menuconfig.
I wondering if the two flags have been added in the wrong place in the new
patch .221??
Can you please help me out if I am doing any thing wrong to set
the trace-clock?
--
Cheers,
Srimanta
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.casi.polymtl.ca/pipermail/lttng-dev/attachments/20100914/185b5256/attachment-0001.htm>
^ permalink raw reply [flat|nested] 8+ messages in thread
end of thread, other threads:[~2010-09-14 16:04 UTC | newest]
Thread overview: 8+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2010-09-14 13:39 [ltt-dev] LTTng Build issue srimanta panda
2010-09-14 13:39 ` srimanta panda
2010-09-14 13:39 ` srimanta panda
2010-09-14 15:52 ` Mathieu Desnoyers
2010-09-14 16:04 ` Mathieu Desnoyers
-- strict thread matches above, loose matches on Subject: below --
2010-09-14 8:35 Srimanta Panda
2010-09-14 8:35 ` Srimanta Panda
2010-09-14 8:35 ` Srimanta Panda
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox