[ltt-dev] Fwd: Re: Lttng and Tiny Core?

[medvedm@ZIN-TECH.COM (Medved, Michael)]

Interestingly enough, when I just compile in Activate Markers and 
Immediate Value optimization, I get problems.  No lttng stuff.  Attached 
is the serial dump... after "Done" shows up on the console it just 
sits.  You can type, but it has no effect.

M

On 08/20/2010 03:52 PM, Mathieu Desnoyers wrote:
> * Medved, Michael (medvedm at ZIN-TECH.COM) wrote:
>    
>> Per Mathieu's email, I'm moving my question to this mailing list.
>>
>> In response to his question - I've already built the tiny core 2.6.33.3 kernel and installed it and it seems to work just fine.  So when I drop the patch into this build is when things start going awry.
>>
>> The 2.6.33 (already patched for TC) can be had here:
>>
>> http://distro.ibiblio.org/pub/linux/distributions/tinycorelinux/3.x/release/src/kernel/
>>
>>      
> OK, can you try disabling all the lttng-specific options and rebuild ?
>
> Also try compiling them as modules, loading one by one, see which one
> fails.
>
> Also having the console output you get when it crashes would be helpful.
> A serial console usually does the trick.
>
> Thanks,
>
> Mathieu
>
>    
>> M
>>
>> -------- Original Message --------
>> Subject: 	Re: Lttng and Tiny Core?	
>> Date: 	Fri, 20 Aug 2010 14:57:13 -0400	
>> From: 	Mathieu Desnoyers<mathieu.desnoyers@efficios.com>  <mailto:mathieu.desnoyers@efficios.com>  	
>> To: 	Medved, Michael<medvedm at ZIN-TECH.COM>  <mailto:medvedm at ZIN-TECH.COM>  	
>>
>>
>> * Medved, Michael (medvedm at ZIN-TECH.COM) wrote:
>>      
>>> Hi Mathieu-
>>>
>>> I'm a NASA contractor and I'd like to us lttng to do some
>>> tracing/profiling of some applications I'm writing for the ISS.  I'm
>>> using a linux distro called tiny core, and have successfully gotten the
>>> kernel to compile with the lttng patches applied (to a 2.6.33.3 kernel),
>>> but when I boot it, it doesn't go to the desktop like usual.  Instead it
>>> spits out a bunch of information (hex numbers, modprobe stuff, etc) and
>>> then goes to a blank line with no cursor, and it doesn't matter what I
>>> type, nothing happens.  Interestingly, if I put in a USB stick it spits
>>> out a bunch of info about it.  I compiled everything from that version
>>> of lttng (.213) into the kernel (none as modules).
>>>
>>> I didn't see any forums on the lttng website or any good place to ask my
>>> question, so I thought I'd drop you an email and see if you can point me
>>> in the right direction?
>>>        
>> Usually these questions go through the mailing list,
>> ltt-dev at lists.casi.polymtl.ca.
>>
>> You should probably try booting your kernel without the lttng patches applied to
>> make sure it's not just a matter of a missing driver (e.g. proprietary nvidia
>> ?) from your kernel per se.
>>
>> The problem may not even be related to lttng, so it would be good to check that
>> first. So you should try a 2.6.33.3 kernel without lttng applied.
>>
>> Thanks,
>>
>> Mathieu
>>
>>      
>>> Thanks!
>>> M
>>>        
>> -- 
>> Mathieu Desnoyers
>> Operating System Efficiency R&D Consultant
>> EfficiOS Inc.
>> http://www.efficios.com
>>
>> _______________________________________________
>> ltt-dev mailing list
>> ltt-dev at lists.casi.polymtl.ca
>> http://lists.casi.polymtl.ca/cgi-bin/mailman/listinfo/ltt-dev
>>
>>      
>    

-------------- next part --------------
An embedded and charset-unspecified text was scrubbed...
Name: com1output.txt
URL: <http://lists.casi.polymtl.ca/pipermail/lttng-dev/attachments/20100821/56a4cd11/attachment-0003.txt>