* [ltt-dev] debian packaging
2010-05-19 15:23 ` Jon Bernard
@ 2010-05-19 16:05 ` Mathieu Desnoyers
2010-05-19 18:08 ` Jon Bernard
2010-05-20 14:56 ` kerstin.jonsson
2010-05-20 16:05 ` kerstin.jonsson
2 siblings, 1 reply; 13+ messages in thread
From: Mathieu Desnoyers @ 2010-05-19 16:05 UTC (permalink / raw)
* Jon Bernard (jbernard at debian.org) wrote:
> * kerstin.jonsson <kerstin.jonsson at ericsson.com> wrote:
> > Hi,
> >
> > I have added a "deb" target to the ust and lttv make files, to
> > enable build of debian packages, I also did some minor changes to
> > the documentation - NB! not the contents, only to enable deb install
> > of the manual as info pages.
> >
> > This is something that I did only for our own convenience, (i.e. the
> > debian control files needs more work before these patches can be
> > made public) we are using pbuilder to create boot images for
> > different targets and then it's neat to have everything installable
> > from deb packets.
> >
> > Is this something that may be of interest? I'd be happy to mail the
> > patches. Or is the intention to keep the packaging separate from the
> > source tree?
>
> Hi Kerstin, thanks for your interest! I'm more than happy to collaborate
> on the debian packaging.
>
> I much prefer to keep the debian packaging development separate from
> upstream development. The git repositories for this are hosted at
> http://git.debian.org/ Ust and liburcu are available in Debian unstable
> and testing, but if you need packages for lenny, let me know. I should
> be able to backport them with little effort.
I'm also OK with keeping the packaging info out of upstream. It's up to
the package maintainers. It also helps separating development from
distribution work, and thus distribute the work.
>
> ltt-control is nearly done, I have a manpage or two to write and it will
> be ready for upload. I can push a snapshot of this effort to a git
> repository if you're interested.
>
> For lttv, I'm only waiting for the licensing to be updated before I can
> upload that package.
Oh ? I thought I did it ? Is there something still missing on that front ?
I fear this fell off the table.
I would appreciate if you can send me an update report on the licensing
issues so I can take care of the missing bits.
Thanks,
Mathieu
>
> Any patches you have please send them along and I'll make sure they get
> included.
>
> Cheers
>
> --
> Jon
>
> _______________________________________________
> ltt-dev mailing list
> ltt-dev at lists.casi.polymtl.ca
> http://lists.casi.polymtl.ca/cgi-bin/mailman/listinfo/ltt-dev
>
--
Mathieu Desnoyers
Operating System Efficiency R&D Consultant
EfficiOS Inc.
http://www.efficios.com
^ permalink raw reply [flat|nested] 13+ messages in thread
* [ltt-dev] debian packaging
2010-05-19 16:05 ` Mathieu Desnoyers
@ 2010-05-19 18:08 ` Jon Bernard
2010-05-19 18:13 ` Mathieu Desnoyers
0 siblings, 1 reply; 13+ messages in thread
From: Jon Bernard @ 2010-05-19 18:08 UTC (permalink / raw)
* Mathieu Desnoyers <compudj at krystal.dyndns.org> wrote:
> * Jon Bernard (jbernard at debian.org) wrote:
> > * kerstin.jonsson <kerstin.jonsson at ericsson.com> wrote:
> > > Hi,
> > >
> > > I have added a "deb" target to the ust and lttv make files, to
> > > enable build of debian packages, I also did some minor changes to
> > > the documentation - NB! not the contents, only to enable deb install
> > > of the manual as info pages.
> > >
> > > This is something that I did only for our own convenience, (i.e. the
> > > debian control files needs more work before these patches can be
> > > made public) we are using pbuilder to create boot images for
> > > different targets and then it's neat to have everything installable
> > > from deb packets.
> > >
> > > Is this something that may be of interest? I'd be happy to mail the
> > > patches. Or is the intention to keep the packaging separate from the
> > > source tree?
> >
> > Hi Kerstin, thanks for your interest! I'm more than happy to collaborate
> > on the debian packaging.
> >
> > I much prefer to keep the debian packaging development separate from
> > upstream development. The git repositories for this are hosted at
> > http://git.debian.org/ Ust and liburcu are available in Debian unstable
> > and testing, but if you need packages for lenny, let me know. I should
> > be able to backport them with little effort.
>
> I'm also OK with keeping the packaging info out of upstream. It's up to
> the package maintainers. It also helps separating development from
> distribution work, and thus distribute the work.
>
> >
> > ltt-control is nearly done, I have a manpage or two to write and it will
> > be ready for upload. I can push a snapshot of this effort to a git
> > repository if you're interested.
> >
> > For lttv, I'm only waiting for the licensing to be updated before I can
> > upload that package.
>
> Oh ? I thought I did it ? Is there something still missing on that front ?
> I fear this fell off the table.
>
> I would appreciate if you can send me an update report on the licensing
> issues so I can take care of the missing bits.
Actually, I believe you are correct now that I've looked again.
Following is the output from license check for reference. It looks
consistent with COPYING, so all is fine unless you see something in the
list that looks out of place. Sorry for the confusion.
./contrib/fsm_checker/FD_CHECK/fd.h: *No copyright* UNKNOWN
./contrib/fsm_checker/FD_CHECK/fd_checker.c: *No copyright* UNKNOWN
./contrib/fsm_checker/FD_CHECK/fd.c: *No copyright* UNKNOWN
./contrib/fsm_checker/CHROOT_CHECK/chroot_jail.h: *No copyright* UNKNOWN
./contrib/fsm_checker/CHROOT_CHECK/chroot_checker.c: *No copyright* UNKNOWN
./contrib/fsm_checker/CHROOT_CHECK/chroot_jail.c: *No copyright* UNKNOWN
./contrib/fsm_checker/LOCK_CHECK/lockclass.c: *No copyright* UNKNOWN
./contrib/fsm_checker/LOCK_CHECK/lockclass.h: *No copyright* UNKNOWN
./contrib/fsm_checker/LOCK_CHECK/fsm_locking.c: *No copyright* UNKNOWN
./contrib/fsm_checker/RT_CHECK/rt_checker.c: *No copyright* UNKNOWN
./contrib/fsm_checker/RT_CHECK/realtime.h: *No copyright* UNKNOWN
./contrib/fsm_checker/RT_CHECK/realtime.c: *No copyright* UNKNOWN
./autogen.sh: *No copyright* UNKNOWN
./scripts/autogen_lttvtraceread_loader.sh: *No copyright* UNKNOWN
./ltt/time.h: LGPL (v2.1) (with incorrect FSF address)
./ltt/marker.c: LGPL (v2.1) (with incorrect FSF address)
./ltt/marker-field.h: *No copyright* UNKNOWN
./ltt/lttvtraceread_loader.c: *No copyright* UNKNOWN
./ltt/ltt.h: LGPL (v2.1) (with incorrect FSF address)
./ltt/event.c: LGPL (v2.1) (with incorrect FSF address)
./ltt/marker-desc.h: *No copyright* UNKNOWN
./ltt/tracefile.c: LGPL (v2.1) (with incorrect FSF address)
./ltt/event.h: *No copyright* UNKNOWN
./ltt/marker.h: *No copyright* UNKNOWN
./ltt/ltt-private.h: LGPL (v2.1) (with incorrect FSF address)
./ltt/ltt-types.h: LGPL (v2.1) (with incorrect FSF address)
./ltt/jni_interface.c: LGPL (v2.1) (with incorrect FSF address)
./ltt/compiler.h: LGPL (v2.1) (with incorrect FSF address)
./ltt/trace.h: LGPL (v2.1) (with incorrect FSF address)
./lttv/lttv/attribute.c: GPL (v2) (with incorrect FSF address)
./lttv/lttv/print.h: GPL (v2) (with incorrect FSF address)
./lttv/lttv/state.c: GPL (v2) (with incorrect FSF address)
./lttv/lttv/contextmacros.h: LGPL (v2.1) (with incorrect FSF address)
./lttv/lttv/module.h: GPL (v2) (with incorrect FSF address)
./lttv/lttv/batchtest.c: GPL (v2) (with incorrect FSF address)
./lttv/lttv/tracecontext.c: GPL (v2) (with incorrect FSF address)
./lttv/lttv/iattribute.c: GPL (v2) (with incorrect FSF address)
./lttv/lttv/stats.c: GPL (v2) (with incorrect FSF address)
./lttv/lttv/option.h: GPL (v2) (with incorrect FSF address)
./lttv/lttv/hook.h: GPL (v2) (with incorrect FSF address)
./lttv/lttv/sync/sync_chain.h: LGPL (v2.1 or later)
./lttv/lttv/sync/event_matching_distributor.h: LGPL (v2.1 or later)
./lttv/lttv/sync/event_processing_lttng_null.h: LGPL (v2.1 or later)
./lttv/lttv/sync/event_analysis_linreg.h: LGPL (v2.1 or later)
./lttv/lttv/sync/event_matching_broadcast.c: LGPL (v2.1 or later)
./lttv/lttv/sync/event_analysis_eval.h: LGPL (v2.1 or later)
./lttv/lttv/sync/event_processing_lttng_null.c: LGPL (v2.1 or later)
./lttv/lttv/sync/graph_functions.c: LGPL (v2.1 or later)
./lttv/lttv/sync/sync_chain_lttv.c: LGPL (v2.1 or later)
./lttv/lttv/sync/graph_functions.h: LGPL (v2.1 or later)
./lttv/lttv/sync/event_processing_text.h: LGPL (v2.1 or later)
./lttv/lttv/sync/factor_reduction.h: LGPL (v2.1 or later)
./lttv/lttv/sync/lookup3.h: *No copyright* UNKNOWN
./lttv/lttv/sync/event_analysis_chull.h: LGPL (v2.1 or later)
./lttv/lttv/sync/sync_chain_unittest.c: LGPL (v2.1 or later)
./lttv/lttv/sync/sync_chain.c: LGPL (v2.1 or later)
./lttv/lttv/sync/data_structures.c: LGPL (v2.1 or later)
./lttv/lttv/sync/event_analysis_linreg.c: LGPL (v2.1 or later)
./lttv/lttv/sync/event_analysis_eval.c: LGPL (v2.1 or later)
./lttv/lttv/sync/event_processing.h: LGPL (v2.1 or later)
./lttv/lttv/sync/event_processing_text.c: LGPL (v2.1 or later)
./lttv/lttv/sync/event_matching_distributor.c: LGPL (v2.1 or later)
./lttv/lttv/sync/event_matching.h: LGPL (v2.1 or later)
./lttv/lttv/sync/sync_chain_lttv.h: LGPL (v2.1 or later)
./lttv/lttv/sync/event_matching_tcp.h: LGPL (v2.1 or later)
./lttv/lttv/sync/event_processing_lttng_common.c: LGPL (v2.1 or later)
./lttv/lttv/sync/event_matching_broadcast.h: LGPL (v2.1 or later)
./lttv/lttv/sync/event_processing_lttng_standard.c: LGPL (v2.1 or later)
./lttv/lttv/sync/factor_reduction_accuracy.c: LGPL (v2.1 or later)
./lttv/lttv/sync/event_matching_tcp.c: LGPL (v2.1 or later)
./lttv/lttv/sync/event_processing_lttng_standard.h: LGPL (v2.1 or later)
./lttv/lttv/sync/event_processing_lttng_common.h: LGPL (v2.1 or later)
./lttv/lttv/sync/event_analysis.h: LGPL (v2.1 or later)
./lttv/lttv/sync/event_analysis_chull.c: LGPL (v2.1 or later)
./lttv/lttv/sync/data_structures.h: LGPL (v2.1 or later)
./lttv/lttv/sync/factor_reduction_accuracy.h: LGPL (v2.1 or later)
./lttv/lttv/lttv.h: GPL (v2) (with incorrect FSF address)
./lttv/lttv/state.h: GPL (v2) (with incorrect FSF address)
./lttv/lttv/module.c: GPL (v2) (with incorrect FSF address)
./lttv/lttv/print.c: GPL (v2) (with incorrect FSF address)
./lttv/lttv/attribute.h: GPL (v2) (with incorrect FSF address)
./lttv/lttv/lttv-gui.sh: *No copyright* UNKNOWN
./lttv/lttv/iattribute.h: GPL (v2) (with incorrect FSF address)
./lttv/lttv/stats.h: GPL (v2) (with incorrect FSF address)
./lttv/lttv/lttv.sh: *No copyright* UNKNOWN
./lttv/lttv/hook.c: GPL (v2) (with incorrect FSF address)
./lttv/lttv/filter.c: GPL (v2) (with incorrect FSF address)
./lttv/lttv/main.c: GPL (v2) (with incorrect FSF address)
./lttv/lttv/traceset.c: GPL (v2) (with incorrect FSF address)
./lttv/lttv/option.c: GPL (v2) (with incorrect FSF address)
./lttv/lttv/filter.h: GPL (v2) (with incorrect FSF address)
./lttv/lttv/traceset.h: GPL (v2) (with incorrect FSF address)
./lttv/lttv/tracecontext.h: GPL (v2) (with incorrect FSF address)
./lttv/modules/text/depanalysis.c: GPL (v2) (with incorrect FSF address)
./lttv/modules/text/sync_chain_batch.c: GPL (v2) (with incorrect FSF address)
./lttv/modules/text/precomputeState.c: GPL (v2) (with incorrect FSF address)
./lttv/modules/text/batchAnalysis.c: GPL (v2) (with incorrect FSF address)
./lttv/modules/text/batchanalysis.h: GPL (v2) (with incorrect FSF address)
./lttv/modules/text/sstack.h: *No copyright* UNKNOWN
./lttv/modules/text/textFilter.c: GPL (v2) (with incorrect FSF address)
./lttv/modules/text/sstack.c: *No copyright* UNKNOWN
./lttv/modules/text/textDump.c: GPL (v2) (with incorrect FSF address)
./lttv/modules/gui/tracecontrol/tracecontrol.c: GPL (v2) (with incorrect FSF address)
./lttv/modules/gui/detailedevents/lttv_plugin_evd.c: GPL (v2) (with incorrect FSF address)
./lttv/modules/gui/detailedevents/lttv_plugin_evd.h: GPL (v2) (with incorrect FSF address)
./lttv/modules/gui/detailedevents/events.c: GPL (v2) (with incorrect FSF address)
./lttv/modules/gui/detailedevents/events.h: *No copyright* UNKNOWN
./lttv/modules/gui/resourceview/lttv_plugin_cfv.c: GPL (v2) (with incorrect FSF address)
./lttv/modules/gui/resourceview/drawitem.c: GPL (v2) (with incorrect FSF address)
./lttv/modules/gui/resourceview/lttv_plugin_cfv.h: GPL (v2) (with incorrect FSF address)
./lttv/modules/gui/resourceview/test.c: GPL (v2) (with incorrect FSF address)
./lttv/modules/gui/resourceview/cfv.c: GPL (v2) (with incorrect FSF address)
./lttv/modules/gui/resourceview/processlist.h: GPL (v2) (with incorrect FSF address)
./lttv/modules/gui/resourceview/module.c: GPL (v2) (with incorrect FSF address)
./lttv/modules/gui/resourceview/processlist.c: GPL (v2) (with incorrect FSF address)
./lttv/modules/gui/resourceview/drawitem.h: GPL (v2) (with incorrect FSF address)
./lttv/modules/gui/resourceview/eventhooks.c: GPL (v2) (with incorrect FSF address)
./lttv/modules/gui/resourceview/drawing.h: GPL (v2) (with incorrect FSF address)
./lttv/modules/gui/resourceview/drawing.c: GPL (v2) (with incorrect FSF address)
./lttv/modules/gui/resourceview/cfv.h: GPL (v2) (with incorrect FSF address)
./lttv/modules/gui/resourceview/eventhooks.h: GPL (v2) (with incorrect FSF address)
./lttv/modules/gui/diskperformance/diskperformance.c: GPL (v2) (with incorrect FSF address)
./lttv/modules/gui/tutorial/tutorial.c: GPL (v2) (with incorrect FSF address)
./lttv/modules/gui/filter/filter.c: GPL (v2) (with incorrect FSF address)
./lttv/modules/gui/controlflow/lttv_plugin_cfv.c: GPL (v2) (with incorrect FSF address)
./lttv/modules/gui/controlflow/drawitem.c: GPL (v2) (with incorrect FSF address)
./lttv/modules/gui/controlflow/lttv_plugin_cfv.h: GPL (v2) (with incorrect FSF address)
./lttv/modules/gui/controlflow/test.c: GPL (v2) (with incorrect FSF address)
./lttv/modules/gui/controlflow/cfv.c: GPL (v2) (with incorrect FSF address)
./lttv/modules/gui/controlflow/processlist.h: GPL (v2) (with incorrect FSF address)
./lttv/modules/gui/controlflow/module.c: GPL (v2) (with incorrect FSF address)
./lttv/modules/gui/controlflow/processlist.c: GPL (v2) (with incorrect FSF address)
./lttv/modules/gui/controlflow/drawitem.h: GPL (v2) (with incorrect FSF address)
./lttv/modules/gui/controlflow/eventhooks.c: GPL (v2) (with incorrect FSF address)
./lttv/modules/gui/controlflow/drawing.h: GPL (v2) (with incorrect FSF address)
./lttv/modules/gui/controlflow/drawing.c: GPL (v2) (with incorrect FSF address)
./lttv/modules/gui/controlflow/cfv.h: GPL (v2) (with incorrect FSF address)
./lttv/modules/gui/controlflow/eventhooks.h: GPL (v2) (with incorrect FSF address)
./lttv/modules/gui/interrupts/interrupts.c: GPL (v2) (with incorrect FSF address)
./lttv/modules/gui/histogram/histobuttonwidget.h: GPL (v2) (with incorrect FSF address)
./lttv/modules/gui/histogram/histocfv.c: GPL (v2) (with incorrect FSF address)
./lttv/modules/gui/histogram/histodrawitem.h: GPL (v2) (with incorrect FSF address)
./lttv/modules/gui/histogram/histodrawing.c: GPL (v2) (with incorrect FSF address)
./lttv/modules/gui/histogram/histodrawing.h: GPL (v2) (with incorrect FSF address)
./lttv/modules/gui/histogram/histomodule.c: GPL (v2) (with incorrect FSF address)
./lttv/modules/gui/histogram/histoeventhooks.c: GPL (v2) (with incorrect FSF address)
./lttv/modules/gui/histogram/histodrawitem.c: GPL (v2) (with incorrect FSF address)
./lttv/modules/gui/histogram/histocfv.h: GPL (v2) (with incorrect FSF address)
./lttv/modules/gui/histogram/histobuttonwidget.c: GPL (v2) (with incorrect FSF address)
./lttv/modules/gui/histogram/histoeventhooks.h: GPL (v2) (with incorrect FSF address)
./lttv/modules/gui/lttvwindow/lttvwindow/menu.h: GPL (v2) (with incorrect FSF address)
./lttv/modules/gui/lttvwindow/lttvwindow/mainwindow.h: GPL (v2) (with incorrect FSF address)
./lttv/modules/gui/lttvwindow/lttvwindow/computetrace.c: GPL (v2) (with incorrect FSF address)
./lttv/modules/gui/lttvwindow/lttvwindow/lttv_plugin.h: GPL (v2) (with incorrect FSF address)
./lttv/modules/gui/lttvwindow/lttvwindow/mainwindow-private.h: GPL (v2) (with incorrect FSF address)
./lttv/modules/gui/lttvwindow/lttvwindow/callbacks.c: GPL (v2) (with incorrect FSF address)
./lttv/modules/gui/lttvwindow/lttvwindow/lttvwindowtraces.c: GPL (v2) (with incorrect FSF address)
./lttv/modules/gui/lttvwindow/lttvwindow/lttvwindow.h: GPL (v2) (with incorrect FSF address)
./lttv/modules/gui/lttvwindow/lttvwindow/gtkmultivpaned.c: GPL (v2) (with incorrect FSF address)
./lttv/modules/gui/lttvwindow/lttvwindow/toolbar.c: GPL (v2) (with incorrect FSF address)
./lttv/modules/gui/lttvwindow/lttvwindow/init_module.c: GPL (v2) (with incorrect FSF address) GENERATED FILE
./lttv/modules/gui/lttvwindow/lttvwindow/gtkmultivpaned.h: GPL (v2) (with incorrect FSF address)
./lttv/modules/gui/lttvwindow/lttvwindow/lttv_plugin.c: GPL (v2) (with incorrect FSF address)
./lttv/modules/gui/lttvwindow/lttvwindow/menu.c: GPL (v2) (with incorrect FSF address)
./lttv/modules/gui/lttvwindow/lttvwindow/lttv_plugin_tab.c: GPL (v2) (with incorrect FSF address)
./lttv/modules/gui/lttvwindow/lttvwindow/lttvwindow.c: GPL (v2) (with incorrect FSF address)
./lttv/modules/gui/lttvwindow/lttvwindow/interface.c: GPL (v2) (with incorrect FSF address) GENERATED FILE
./lttv/modules/gui/lttvwindow/lttvwindow/callbacks.h: GPL (v2) (with incorrect FSF address)
./lttv/modules/gui/lttvwindow/lttvwindow/interface.h: GPL (v2) (with incorrect FSF address) GENERATED FILE
./lttv/modules/gui/lttvwindow/lttvwindow/toolbar.h: GPL (v2) (with incorrect FSF address)
./lttv/modules/gui/lttvwindow/lttvwindow/lttv_plugin_tab.h: GPL (v2) (with incorrect FSF address)
./lttv/modules/gui/lttvwindow/lttvwindow/support.c: GPL (v2) (with incorrect FSF address) GENERATED FILE
./lttv/modules/gui/lttvwindow/lttvwindow/test_main.c: *No copyright* GENERATED FILE
./lttv/modules/gui/lttvwindow/lttvwindow/support.h: GPL (v2) (with incorrect FSF address) GENERATED FILE
./lttv/modules/gui/lttvwindow/lttvwindow/lttvwindowtraces.h: GPL (v2) (with incorrect FSF address)
./lttv/modules/gui/statistics/statistics.c: GPL (v2) (with incorrect FSF address)
./lttv/modules/examples/samplemodule.c: *No copyright* UNKNOWN
./lttv/modules/examples/samplemodule2.c: *No copyright* UNKNOWN
./lttv/modules/examples/sampledep.c: *No copyright* UNKNOWN
./profile.sh: *No copyright* UNKNOWN
--
Jon
^ permalink raw reply [flat|nested] 13+ messages in thread
* [ltt-dev] debian packaging
2010-05-19 18:08 ` Jon Bernard
@ 2010-05-19 18:13 ` Mathieu Desnoyers
0 siblings, 0 replies; 13+ messages in thread
From: Mathieu Desnoyers @ 2010-05-19 18:13 UTC (permalink / raw)
* Jon Bernard (jbernard at debian.org) wrote:
> * Mathieu Desnoyers <compudj at krystal.dyndns.org> wrote:
> > * Jon Bernard (jbernard at debian.org) wrote:
> > > * kerstin.jonsson <kerstin.jonsson at ericsson.com> wrote:
> > > > Hi,
> > > >
> > > > I have added a "deb" target to the ust and lttv make files, to
> > > > enable build of debian packages, I also did some minor changes to
> > > > the documentation - NB! not the contents, only to enable deb install
> > > > of the manual as info pages.
> > > >
> > > > This is something that I did only for our own convenience, (i.e. the
> > > > debian control files needs more work before these patches can be
> > > > made public) we are using pbuilder to create boot images for
> > > > different targets and then it's neat to have everything installable
> > > > from deb packets.
> > > >
> > > > Is this something that may be of interest? I'd be happy to mail the
> > > > patches. Or is the intention to keep the packaging separate from the
> > > > source tree?
> > >
> > > Hi Kerstin, thanks for your interest! I'm more than happy to collaborate
> > > on the debian packaging.
> > >
> > > I much prefer to keep the debian packaging development separate from
> > > upstream development. The git repositories for this are hosted at
> > > http://git.debian.org/ Ust and liburcu are available in Debian unstable
> > > and testing, but if you need packages for lenny, let me know. I should
> > > be able to backport them with little effort.
> >
> > I'm also OK with keeping the packaging info out of upstream. It's up to
> > the package maintainers. It also helps separating development from
> > distribution work, and thus distribute the work.
> >
> > >
> > > ltt-control is nearly done, I have a manpage or two to write and it will
> > > be ready for upload. I can push a snapshot of this effort to a git
> > > repository if you're interested.
> > >
> > > For lttv, I'm only waiting for the licensing to be updated before I can
> > > upload that package.
> >
> > Oh ? I thought I did it ? Is there something still missing on that front ?
> > I fear this fell off the table.
> >
> > I would appreciate if you can send me an update report on the licensing
> > issues so I can take care of the missing bits.
>
> Actually, I believe you are correct now that I've looked again.
> Following is the output from license check for reference. It looks
> consistent with COPYING, so all is fine unless you see something in the
> list that looks out of place. Sorry for the confusion.
It all looks fine. Please feel free to contribute a patch to fix the
incorrect FSF address warnings if you think it is of any use.
Thanks,
Mathieu
>
> ./contrib/fsm_checker/FD_CHECK/fd.h: *No copyright* UNKNOWN
> ./contrib/fsm_checker/FD_CHECK/fd_checker.c: *No copyright* UNKNOWN
> ./contrib/fsm_checker/FD_CHECK/fd.c: *No copyright* UNKNOWN
> ./contrib/fsm_checker/CHROOT_CHECK/chroot_jail.h: *No copyright* UNKNOWN
> ./contrib/fsm_checker/CHROOT_CHECK/chroot_checker.c: *No copyright* UNKNOWN
> ./contrib/fsm_checker/CHROOT_CHECK/chroot_jail.c: *No copyright* UNKNOWN
> ./contrib/fsm_checker/LOCK_CHECK/lockclass.c: *No copyright* UNKNOWN
> ./contrib/fsm_checker/LOCK_CHECK/lockclass.h: *No copyright* UNKNOWN
> ./contrib/fsm_checker/LOCK_CHECK/fsm_locking.c: *No copyright* UNKNOWN
> ./contrib/fsm_checker/RT_CHECK/rt_checker.c: *No copyright* UNKNOWN
> ./contrib/fsm_checker/RT_CHECK/realtime.h: *No copyright* UNKNOWN
> ./contrib/fsm_checker/RT_CHECK/realtime.c: *No copyright* UNKNOWN
> ./autogen.sh: *No copyright* UNKNOWN
> ./scripts/autogen_lttvtraceread_loader.sh: *No copyright* UNKNOWN
> ./ltt/time.h: LGPL (v2.1) (with incorrect FSF address)
> ./ltt/marker.c: LGPL (v2.1) (with incorrect FSF address)
> ./ltt/marker-field.h: *No copyright* UNKNOWN
> ./ltt/lttvtraceread_loader.c: *No copyright* UNKNOWN
> ./ltt/ltt.h: LGPL (v2.1) (with incorrect FSF address)
> ./ltt/event.c: LGPL (v2.1) (with incorrect FSF address)
> ./ltt/marker-desc.h: *No copyright* UNKNOWN
> ./ltt/tracefile.c: LGPL (v2.1) (with incorrect FSF address)
> ./ltt/event.h: *No copyright* UNKNOWN
> ./ltt/marker.h: *No copyright* UNKNOWN
> ./ltt/ltt-private.h: LGPL (v2.1) (with incorrect FSF address)
> ./ltt/ltt-types.h: LGPL (v2.1) (with incorrect FSF address)
> ./ltt/jni_interface.c: LGPL (v2.1) (with incorrect FSF address)
> ./ltt/compiler.h: LGPL (v2.1) (with incorrect FSF address)
> ./ltt/trace.h: LGPL (v2.1) (with incorrect FSF address)
> ./lttv/lttv/attribute.c: GPL (v2) (with incorrect FSF address)
> ./lttv/lttv/print.h: GPL (v2) (with incorrect FSF address)
> ./lttv/lttv/state.c: GPL (v2) (with incorrect FSF address)
> ./lttv/lttv/contextmacros.h: LGPL (v2.1) (with incorrect FSF address)
> ./lttv/lttv/module.h: GPL (v2) (with incorrect FSF address)
> ./lttv/lttv/batchtest.c: GPL (v2) (with incorrect FSF address)
> ./lttv/lttv/tracecontext.c: GPL (v2) (with incorrect FSF address)
> ./lttv/lttv/iattribute.c: GPL (v2) (with incorrect FSF address)
> ./lttv/lttv/stats.c: GPL (v2) (with incorrect FSF address)
> ./lttv/lttv/option.h: GPL (v2) (with incorrect FSF address)
> ./lttv/lttv/hook.h: GPL (v2) (with incorrect FSF address)
> ./lttv/lttv/sync/sync_chain.h: LGPL (v2.1 or later)
> ./lttv/lttv/sync/event_matching_distributor.h: LGPL (v2.1 or later)
> ./lttv/lttv/sync/event_processing_lttng_null.h: LGPL (v2.1 or later)
> ./lttv/lttv/sync/event_analysis_linreg.h: LGPL (v2.1 or later)
> ./lttv/lttv/sync/event_matching_broadcast.c: LGPL (v2.1 or later)
> ./lttv/lttv/sync/event_analysis_eval.h: LGPL (v2.1 or later)
> ./lttv/lttv/sync/event_processing_lttng_null.c: LGPL (v2.1 or later)
> ./lttv/lttv/sync/graph_functions.c: LGPL (v2.1 or later)
> ./lttv/lttv/sync/sync_chain_lttv.c: LGPL (v2.1 or later)
> ./lttv/lttv/sync/graph_functions.h: LGPL (v2.1 or later)
> ./lttv/lttv/sync/event_processing_text.h: LGPL (v2.1 or later)
> ./lttv/lttv/sync/factor_reduction.h: LGPL (v2.1 or later)
> ./lttv/lttv/sync/lookup3.h: *No copyright* UNKNOWN
> ./lttv/lttv/sync/event_analysis_chull.h: LGPL (v2.1 or later)
> ./lttv/lttv/sync/sync_chain_unittest.c: LGPL (v2.1 or later)
> ./lttv/lttv/sync/sync_chain.c: LGPL (v2.1 or later)
> ./lttv/lttv/sync/data_structures.c: LGPL (v2.1 or later)
> ./lttv/lttv/sync/event_analysis_linreg.c: LGPL (v2.1 or later)
> ./lttv/lttv/sync/event_analysis_eval.c: LGPL (v2.1 or later)
> ./lttv/lttv/sync/event_processing.h: LGPL (v2.1 or later)
> ./lttv/lttv/sync/event_processing_text.c: LGPL (v2.1 or later)
> ./lttv/lttv/sync/event_matching_distributor.c: LGPL (v2.1 or later)
> ./lttv/lttv/sync/event_matching.h: LGPL (v2.1 or later)
> ./lttv/lttv/sync/sync_chain_lttv.h: LGPL (v2.1 or later)
> ./lttv/lttv/sync/event_matching_tcp.h: LGPL (v2.1 or later)
> ./lttv/lttv/sync/event_processing_lttng_common.c: LGPL (v2.1 or later)
> ./lttv/lttv/sync/event_matching_broadcast.h: LGPL (v2.1 or later)
> ./lttv/lttv/sync/event_processing_lttng_standard.c: LGPL (v2.1 or later)
> ./lttv/lttv/sync/factor_reduction_accuracy.c: LGPL (v2.1 or later)
> ./lttv/lttv/sync/event_matching_tcp.c: LGPL (v2.1 or later)
> ./lttv/lttv/sync/event_processing_lttng_standard.h: LGPL (v2.1 or later)
> ./lttv/lttv/sync/event_processing_lttng_common.h: LGPL (v2.1 or later)
> ./lttv/lttv/sync/event_analysis.h: LGPL (v2.1 or later)
> ./lttv/lttv/sync/event_analysis_chull.c: LGPL (v2.1 or later)
> ./lttv/lttv/sync/data_structures.h: LGPL (v2.1 or later)
> ./lttv/lttv/sync/factor_reduction_accuracy.h: LGPL (v2.1 or later)
> ./lttv/lttv/lttv.h: GPL (v2) (with incorrect FSF address)
> ./lttv/lttv/state.h: GPL (v2) (with incorrect FSF address)
> ./lttv/lttv/module.c: GPL (v2) (with incorrect FSF address)
> ./lttv/lttv/print.c: GPL (v2) (with incorrect FSF address)
> ./lttv/lttv/attribute.h: GPL (v2) (with incorrect FSF address)
> ./lttv/lttv/lttv-gui.sh: *No copyright* UNKNOWN
> ./lttv/lttv/iattribute.h: GPL (v2) (with incorrect FSF address)
> ./lttv/lttv/stats.h: GPL (v2) (with incorrect FSF address)
> ./lttv/lttv/lttv.sh: *No copyright* UNKNOWN
> ./lttv/lttv/hook.c: GPL (v2) (with incorrect FSF address)
> ./lttv/lttv/filter.c: GPL (v2) (with incorrect FSF address)
> ./lttv/lttv/main.c: GPL (v2) (with incorrect FSF address)
> ./lttv/lttv/traceset.c: GPL (v2) (with incorrect FSF address)
> ./lttv/lttv/option.c: GPL (v2) (with incorrect FSF address)
> ./lttv/lttv/filter.h: GPL (v2) (with incorrect FSF address)
> ./lttv/lttv/traceset.h: GPL (v2) (with incorrect FSF address)
> ./lttv/lttv/tracecontext.h: GPL (v2) (with incorrect FSF address)
> ./lttv/modules/text/depanalysis.c: GPL (v2) (with incorrect FSF address)
> ./lttv/modules/text/sync_chain_batch.c: GPL (v2) (with incorrect FSF address)
> ./lttv/modules/text/precomputeState.c: GPL (v2) (with incorrect FSF address)
> ./lttv/modules/text/batchAnalysis.c: GPL (v2) (with incorrect FSF address)
> ./lttv/modules/text/batchanalysis.h: GPL (v2) (with incorrect FSF address)
> ./lttv/modules/text/sstack.h: *No copyright* UNKNOWN
> ./lttv/modules/text/textFilter.c: GPL (v2) (with incorrect FSF address)
> ./lttv/modules/text/sstack.c: *No copyright* UNKNOWN
> ./lttv/modules/text/textDump.c: GPL (v2) (with incorrect FSF address)
> ./lttv/modules/gui/tracecontrol/tracecontrol.c: GPL (v2) (with incorrect FSF address)
> ./lttv/modules/gui/detailedevents/lttv_plugin_evd.c: GPL (v2) (with incorrect FSF address)
> ./lttv/modules/gui/detailedevents/lttv_plugin_evd.h: GPL (v2) (with incorrect FSF address)
> ./lttv/modules/gui/detailedevents/events.c: GPL (v2) (with incorrect FSF address)
> ./lttv/modules/gui/detailedevents/events.h: *No copyright* UNKNOWN
> ./lttv/modules/gui/resourceview/lttv_plugin_cfv.c: GPL (v2) (with incorrect FSF address)
> ./lttv/modules/gui/resourceview/drawitem.c: GPL (v2) (with incorrect FSF address)
> ./lttv/modules/gui/resourceview/lttv_plugin_cfv.h: GPL (v2) (with incorrect FSF address)
> ./lttv/modules/gui/resourceview/test.c: GPL (v2) (with incorrect FSF address)
> ./lttv/modules/gui/resourceview/cfv.c: GPL (v2) (with incorrect FSF address)
> ./lttv/modules/gui/resourceview/processlist.h: GPL (v2) (with incorrect FSF address)
> ./lttv/modules/gui/resourceview/module.c: GPL (v2) (with incorrect FSF address)
> ./lttv/modules/gui/resourceview/processlist.c: GPL (v2) (with incorrect FSF address)
> ./lttv/modules/gui/resourceview/drawitem.h: GPL (v2) (with incorrect FSF address)
> ./lttv/modules/gui/resourceview/eventhooks.c: GPL (v2) (with incorrect FSF address)
> ./lttv/modules/gui/resourceview/drawing.h: GPL (v2) (with incorrect FSF address)
> ./lttv/modules/gui/resourceview/drawing.c: GPL (v2) (with incorrect FSF address)
> ./lttv/modules/gui/resourceview/cfv.h: GPL (v2) (with incorrect FSF address)
> ./lttv/modules/gui/resourceview/eventhooks.h: GPL (v2) (with incorrect FSF address)
> ./lttv/modules/gui/diskperformance/diskperformance.c: GPL (v2) (with incorrect FSF address)
> ./lttv/modules/gui/tutorial/tutorial.c: GPL (v2) (with incorrect FSF address)
> ./lttv/modules/gui/filter/filter.c: GPL (v2) (with incorrect FSF address)
> ./lttv/modules/gui/controlflow/lttv_plugin_cfv.c: GPL (v2) (with incorrect FSF address)
> ./lttv/modules/gui/controlflow/drawitem.c: GPL (v2) (with incorrect FSF address)
> ./lttv/modules/gui/controlflow/lttv_plugin_cfv.h: GPL (v2) (with incorrect FSF address)
> ./lttv/modules/gui/controlflow/test.c: GPL (v2) (with incorrect FSF address)
> ./lttv/modules/gui/controlflow/cfv.c: GPL (v2) (with incorrect FSF address)
> ./lttv/modules/gui/controlflow/processlist.h: GPL (v2) (with incorrect FSF address)
> ./lttv/modules/gui/controlflow/module.c: GPL (v2) (with incorrect FSF address)
> ./lttv/modules/gui/controlflow/processlist.c: GPL (v2) (with incorrect FSF address)
> ./lttv/modules/gui/controlflow/drawitem.h: GPL (v2) (with incorrect FSF address)
> ./lttv/modules/gui/controlflow/eventhooks.c: GPL (v2) (with incorrect FSF address)
> ./lttv/modules/gui/controlflow/drawing.h: GPL (v2) (with incorrect FSF address)
> ./lttv/modules/gui/controlflow/drawing.c: GPL (v2) (with incorrect FSF address)
> ./lttv/modules/gui/controlflow/cfv.h: GPL (v2) (with incorrect FSF address)
> ./lttv/modules/gui/controlflow/eventhooks.h: GPL (v2) (with incorrect FSF address)
> ./lttv/modules/gui/interrupts/interrupts.c: GPL (v2) (with incorrect FSF address)
> ./lttv/modules/gui/histogram/histobuttonwidget.h: GPL (v2) (with incorrect FSF address)
> ./lttv/modules/gui/histogram/histocfv.c: GPL (v2) (with incorrect FSF address)
> ./lttv/modules/gui/histogram/histodrawitem.h: GPL (v2) (with incorrect FSF address)
> ./lttv/modules/gui/histogram/histodrawing.c: GPL (v2) (with incorrect FSF address)
> ./lttv/modules/gui/histogram/histodrawing.h: GPL (v2) (with incorrect FSF address)
> ./lttv/modules/gui/histogram/histomodule.c: GPL (v2) (with incorrect FSF address)
> ./lttv/modules/gui/histogram/histoeventhooks.c: GPL (v2) (with incorrect FSF address)
> ./lttv/modules/gui/histogram/histodrawitem.c: GPL (v2) (with incorrect FSF address)
> ./lttv/modules/gui/histogram/histocfv.h: GPL (v2) (with incorrect FSF address)
> ./lttv/modules/gui/histogram/histobuttonwidget.c: GPL (v2) (with incorrect FSF address)
> ./lttv/modules/gui/histogram/histoeventhooks.h: GPL (v2) (with incorrect FSF address)
> ./lttv/modules/gui/lttvwindow/lttvwindow/menu.h: GPL (v2) (with incorrect FSF address)
> ./lttv/modules/gui/lttvwindow/lttvwindow/mainwindow.h: GPL (v2) (with incorrect FSF address)
> ./lttv/modules/gui/lttvwindow/lttvwindow/computetrace.c: GPL (v2) (with incorrect FSF address)
> ./lttv/modules/gui/lttvwindow/lttvwindow/lttv_plugin.h: GPL (v2) (with incorrect FSF address)
> ./lttv/modules/gui/lttvwindow/lttvwindow/mainwindow-private.h: GPL (v2) (with incorrect FSF address)
> ./lttv/modules/gui/lttvwindow/lttvwindow/callbacks.c: GPL (v2) (with incorrect FSF address)
> ./lttv/modules/gui/lttvwindow/lttvwindow/lttvwindowtraces.c: GPL (v2) (with incorrect FSF address)
> ./lttv/modules/gui/lttvwindow/lttvwindow/lttvwindow.h: GPL (v2) (with incorrect FSF address)
> ./lttv/modules/gui/lttvwindow/lttvwindow/gtkmultivpaned.c: GPL (v2) (with incorrect FSF address)
> ./lttv/modules/gui/lttvwindow/lttvwindow/toolbar.c: GPL (v2) (with incorrect FSF address)
> ./lttv/modules/gui/lttvwindow/lttvwindow/init_module.c: GPL (v2) (with incorrect FSF address) GENERATED FILE
> ./lttv/modules/gui/lttvwindow/lttvwindow/gtkmultivpaned.h: GPL (v2) (with incorrect FSF address)
> ./lttv/modules/gui/lttvwindow/lttvwindow/lttv_plugin.c: GPL (v2) (with incorrect FSF address)
> ./lttv/modules/gui/lttvwindow/lttvwindow/menu.c: GPL (v2) (with incorrect FSF address)
> ./lttv/modules/gui/lttvwindow/lttvwindow/lttv_plugin_tab.c: GPL (v2) (with incorrect FSF address)
> ./lttv/modules/gui/lttvwindow/lttvwindow/lttvwindow.c: GPL (v2) (with incorrect FSF address)
> ./lttv/modules/gui/lttvwindow/lttvwindow/interface.c: GPL (v2) (with incorrect FSF address) GENERATED FILE
> ./lttv/modules/gui/lttvwindow/lttvwindow/callbacks.h: GPL (v2) (with incorrect FSF address)
> ./lttv/modules/gui/lttvwindow/lttvwindow/interface.h: GPL (v2) (with incorrect FSF address) GENERATED FILE
> ./lttv/modules/gui/lttvwindow/lttvwindow/toolbar.h: GPL (v2) (with incorrect FSF address)
> ./lttv/modules/gui/lttvwindow/lttvwindow/lttv_plugin_tab.h: GPL (v2) (with incorrect FSF address)
> ./lttv/modules/gui/lttvwindow/lttvwindow/support.c: GPL (v2) (with incorrect FSF address) GENERATED FILE
> ./lttv/modules/gui/lttvwindow/lttvwindow/test_main.c: *No copyright* GENERATED FILE
> ./lttv/modules/gui/lttvwindow/lttvwindow/support.h: GPL (v2) (with incorrect FSF address) GENERATED FILE
> ./lttv/modules/gui/lttvwindow/lttvwindow/lttvwindowtraces.h: GPL (v2) (with incorrect FSF address)
> ./lttv/modules/gui/statistics/statistics.c: GPL (v2) (with incorrect FSF address)
> ./lttv/modules/examples/samplemodule.c: *No copyright* UNKNOWN
> ./lttv/modules/examples/samplemodule2.c: *No copyright* UNKNOWN
> ./lttv/modules/examples/sampledep.c: *No copyright* UNKNOWN
> ./profile.sh: *No copyright* UNKNOWN
>
> --
> Jon
>
> _______________________________________________
> ltt-dev mailing list
> ltt-dev at lists.casi.polymtl.ca
> http://lists.casi.polymtl.ca/cgi-bin/mailman/listinfo/ltt-dev
>
--
Mathieu Desnoyers
Operating System Efficiency R&D Consultant
EfficiOS Inc.
http://www.efficios.com
^ permalink raw reply [flat|nested] 13+ messages in thread
* [ltt-dev] debian packaging
2010-05-19 15:23 ` Jon Bernard
2010-05-19 16:05 ` Mathieu Desnoyers
@ 2010-05-20 14:56 ` kerstin.jonsson
2010-05-20 16:05 ` kerstin.jonsson
2 siblings, 0 replies; 13+ messages in thread
From: kerstin.jonsson @ 2010-05-20 14:56 UTC (permalink / raw)
On 05/19/2010 05:23 PM, Jon Bernard wrote:
> * kerstin.jonsson<kerstin.jonsson at ericsson.com> wrote:
>
>> Hi,
>>
>> I have added a "deb" target to the ust and lttv make files, to
>> enable build of debian packages, I also did some minor changes to
>> the documentation - NB! not the contents, only to enable deb install
>> of the manual as info pages.
>>
>> This is something that I did only for our own convenience, (i.e. the
>> debian control files needs more work before these patches can be
>> made public) we are using pbuilder to create boot images for
>> different targets and then it's neat to have everything installable
>> from deb packets.
>>
>> Is this something that may be of interest? I'd be happy to mail the
>> patches. Or is the intention to keep the packaging separate from the
>> source tree?
>>
> Hi Kerstin, thanks for your interest! I'm more than happy to collaborate
> on the debian packaging.
>
>
Hi Bernard,
I'm afraid that I don't have much of value to contribute. I'll try to
explain why (in few words;D)
Nils and I have a setup where we use separate machines for building and
testing,
we try to automate the process of creating boot images for different
target machines
as far as possible. If you look at the problem from that angle you may
easier understand
why we find it very convenient to have the packaging tools included in
the source tree.
We fully understand (and respect), however, your reasons for wanting to
keep the packaging separate.
The reason I suspect you may not find anything useful in my series of
patches
(which I will force upon you anyway) is that I focused only on creating
usable and installable
.deb packets, and didn't pay any attention whatsoever to formalities in
debian packet control files.
As I saw it, the easiest way of doing the packaging in-tree was to base
the packaging on the tar archive
produced by the make distcheck target - so this is what I did.
The distcheck target, however, would not build cleanly so I had to do
some minor modifications
to the automake system to fix that.
As Nils an I are beginners we found it useful to have the manual
installed as info pages on our
target machines - some additional changes to the make system + info
install tags added to
the texinfo was needed to achieve that.
Then I created a set of truly rudimentary debian control files and just
added a deb target to
the top Makefile.am.
I did this for ust as well as for lttv, how do you prefer having the
patches, inline or attached?
Best Regards,
Kerstin
> I much prefer to keep the debian packaging development separate from
> upstream development. The git repositories for this are hosted at
> http://git.debian.org/ Ust and liburcu are available in Debian unstable
> and testing, but if you need packages for lenny, let me know. I should
> be able to backport them with little effort.
>
>
Hi Bernard,
> ltt-control is nearly done, I have a manpage or two to write and it will
> be ready for upload. I can push a snapshot of this effort to a git
> repository if you're interested.
>
> For lttv, I'm only waiting for the licensing to be updated before I can
> upload that package.
>
> Any patches you have please send them along and I'll make sure they get
> included.
>
> Cheers
>
>
^ permalink raw reply [flat|nested] 13+ messages in thread
* [ltt-dev] debian packaging
2010-05-19 15:23 ` Jon Bernard
2010-05-19 16:05 ` Mathieu Desnoyers
2010-05-20 14:56 ` kerstin.jonsson
@ 2010-05-20 16:05 ` kerstin.jonsson
2010-05-20 16:05 ` kerstin.jonsson
` (2 more replies)
2 siblings, 3 replies; 13+ messages in thread
From: kerstin.jonsson @ 2010-05-20 16:05 UTC (permalink / raw)
On 05/19/2010 05:23 PM, Jon Bernard wrote:
> * kerstin.jonsson<kerstin.jonsson at ericsson.com> wrote:
>
>> Hi,
>>
>> I have added a "deb" target to the ust and lttv make files, to
>> enable build of debian packages, I also did some minor changes to
>> the documentation - NB! not the contents, only to enable deb install
>> of the manual as info pages.
>>
>> This is something that I did only for our own convenience, (i.e. the
>> debian control files needs more work before these patches can be
>> made public) we are using pbuilder to create boot images for
>> different targets and then it's neat to have everything installable
>> from deb packets.
>>
>> Is this something that may be of interest? I'd be happy to mail the
>> patches. Or is the intention to keep the packaging separate from the
>> source tree?
>>
>
Hi again, sorry! I was interrupted.
> Hi Kerstin, thanks for your interest! I'm more than happy to collaborate
> on the debian packaging.
>
> I much prefer to keep the debian packaging development separate from
> upstream development. The git repositories for this are hosted at
> http://git.debian.org/ Ust and liburcu are available in Debian unstable
> and testing, but if you need packages for lenny, let me know. I should
> be able to backport them with little effort.
>
>
We are using testing and unstable but the problem we wanted to solve was
to have a simple way of including our own modifications to UST into the
boot images we create for the target machines. LTTV, however, is a different
matter, we will not do any modifications to lttv and then it's very nice to
be able to download the package directly. But still, testing and unstable
is just what we're looking for.
> ltt-control is nearly done, I have a manpage or two to write and it will
> be ready for upload. I can push a snapshot of this effort to a git
> repository if you're interested.
>
>
We most certainly are:D
> For lttv, I'm only waiting for the licensing to be updated before I can
> upload that package.
>
> Any patches you have please send them along and I'll make sure they get
> included.
>
>
Since my lttv patches are soon to be obsolete, also for us, I'll attache
only the patches that I did to the UST source tree.
Best Regards,
Kerstin
> Cheers
>
>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: 0001-Add-man-to-EXTRA_DIST-target-to-enable-clean-make-di.patch
Type: text/x-patch
Size: 578 bytes
Desc: not available
URL: <http://lists.casi.polymtl.ca/pipermail/lttng-dev/attachments/20100520/bebf18ad/attachment-0018.bin>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: 0002-Added-debian-packet-configuration-files.patch
Type: text/x-patch
Size: 7313 bytes
Desc: not available
URL: <http://lists.casi.polymtl.ca/pipermail/lttng-dev/attachments/20100520/bebf18ad/attachment-0019.bin>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: 0003-modified-make-to-build-ust-manual-as-info-page.patch
Type: text/x-patch
Size: 32271 bytes
Desc: not available
URL: <http://lists.casi.polymtl.ca/pipermail/lttng-dev/attachments/20100520/bebf18ad/attachment-0020.bin>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: 0004-Added-ust-clock.h-to-Makefile.am-to-enable-make-dist.patch
Type: text/x-patch
Size: 682 bytes
Desc: not available
URL: <http://lists.casi.polymtl.ca/pipermail/lttng-dev/attachments/20100520/bebf18ad/attachment-0021.bin>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: 0005-added-deb-make-target.patch
Type: text/x-patch
Size: 1356 bytes
Desc: not available
URL: <http://lists.casi.polymtl.ca/pipermail/lttng-dev/attachments/20100520/bebf18ad/attachment-0022.bin>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: 0006-ignore-generated-files.patch
Type: text/x-patch
Size: 551 bytes
Desc: not available
URL: <http://lists.casi.polymtl.ca/pipermail/lttng-dev/attachments/20100520/bebf18ad/attachment-0023.bin>
^ permalink raw reply [flat|nested] 13+ messages in thread* [ltt-dev] debian packaging
2010-05-20 16:05 ` kerstin.jonsson
@ 2010-05-20 16:05 ` kerstin.jonsson
2010-05-20 16:05 ` kerstin.jonsson
2010-05-26 15:27 ` Jon Bernard
2 siblings, 0 replies; 13+ messages in thread
From: kerstin.jonsson @ 2010-05-20 16:05 UTC (permalink / raw)
On 05/19/2010 05:23 PM, Jon Bernard wrote:
> * kerstin.jonsson<kerstin.jonsson at ericsson.com> wrote:
>
>> Hi,
>>
>> I have added a "deb" target to the ust and lttv make files, to
>> enable build of debian packages, I also did some minor changes to
>> the documentation - NB! not the contents, only to enable deb install
>> of the manual as info pages.
>>
>> This is something that I did only for our own convenience, (i.e. the
>> debian control files needs more work before these patches can be
>> made public) we are using pbuilder to create boot images for
>> different targets and then it's neat to have everything installable
>> from deb packets.
>>
>> Is this something that may be of interest? I'd be happy to mail the
>> patches. Or is the intention to keep the packaging separate from the
>> source tree?
>>
>
Hi again, sorry! I was interrupted.
> Hi Kerstin, thanks for your interest! I'm more than happy to collaborate
> on the debian packaging.
>
> I much prefer to keep the debian packaging development separate from
> upstream development. The git repositories for this are hosted at
> http://git.debian.org/ Ust and liburcu are available in Debian unstable
> and testing, but if you need packages for lenny, let me know. I should
> be able to backport them with little effort.
>
>
We are using testing and unstable but the problem we wanted to solve was
to have a simple way of including our own modifications to UST into the
boot images we create for the target machines. LTTV, however, is a different
matter, we will not do any modifications to lttv and then it's very nice to
be able to download the package directly. But still, testing and unstable
is just what we're looking for.
> ltt-control is nearly done, I have a manpage or two to write and it will
> be ready for upload. I can push a snapshot of this effort to a git
> repository if you're interested.
>
>
We most certainly are:D
> For lttv, I'm only waiting for the licensing to be updated before I can
> upload that package.
>
> Any patches you have please send them along and I'll make sure they get
> included.
>
>
Since my lttv patches are soon to be obsolete, also for us, I'll attache
only the patches that I did to the UST source tree.
Best Regards,
Kerstin
> Cheers
>
>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: 0001-Add-man-to-EXTRA_DIST-target-to-enable-clean-make-di.patch
Type: text/x-patch
Size: 578 bytes
Desc: not available
URL: <http://lists.casi.polymtl.ca/pipermail/ltt-dev/attachments/20100520/bebf18ad/attachment-0006.bin>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: 0002-Added-debian-packet-configuration-files.patch
Type: text/x-patch
Size: 7313 bytes
Desc: not available
URL: <http://lists.casi.polymtl.ca/pipermail/ltt-dev/attachments/20100520/bebf18ad/attachment-0007.bin>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: 0003-modified-make-to-build-ust-manual-as-info-page.patch
Type: text/x-patch
Size: 32271 bytes
Desc: not available
URL: <http://lists.casi.polymtl.ca/pipermail/ltt-dev/attachments/20100520/bebf18ad/attachment-0008.bin>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: 0004-Added-ust-clock.h-to-Makefile.am-to-enable-make-dist.patch
Type: text/x-patch
Size: 682 bytes
Desc: not available
URL: <http://lists.casi.polymtl.ca/pipermail/ltt-dev/attachments/20100520/bebf18ad/attachment-0009.bin>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: 0005-added-deb-make-target.patch
Type: text/x-patch
Size: 1356 bytes
Desc: not available
URL: <http://lists.casi.polymtl.ca/pipermail/ltt-dev/attachments/20100520/bebf18ad/attachment-0010.bin>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: 0006-ignore-generated-files.patch
Type: text/x-patch
Size: 551 bytes
Desc: not available
URL: <http://lists.casi.polymtl.ca/pipermail/ltt-dev/attachments/20100520/bebf18ad/attachment-0011.bin>
^ permalink raw reply [flat|nested] 13+ messages in thread
* [ltt-dev] debian packaging
2010-05-20 16:05 ` kerstin.jonsson
2010-05-20 16:05 ` kerstin.jonsson
@ 2010-05-20 16:05 ` kerstin.jonsson
2010-05-26 15:27 ` Jon Bernard
2 siblings, 0 replies; 13+ messages in thread
From: kerstin.jonsson @ 2010-05-20 16:05 UTC (permalink / raw)
On 05/19/2010 05:23 PM, Jon Bernard wrote:
> * kerstin.jonsson<kerstin.jonsson at ericsson.com> wrote:
>
>> Hi,
>>
>> I have added a "deb" target to the ust and lttv make files, to
>> enable build of debian packages, I also did some minor changes to
>> the documentation - NB! not the contents, only to enable deb install
>> of the manual as info pages.
>>
>> This is something that I did only for our own convenience, (i.e. the
>> debian control files needs more work before these patches can be
>> made public) we are using pbuilder to create boot images for
>> different targets and then it's neat to have everything installable
>> from deb packets.
>>
>> Is this something that may be of interest? I'd be happy to mail the
>> patches. Or is the intention to keep the packaging separate from the
>> source tree?
>>
>
Hi again, sorry! I was interrupted.
> Hi Kerstin, thanks for your interest! I'm more than happy to collaborate
> on the debian packaging.
>
> I much prefer to keep the debian packaging development separate from
> upstream development. The git repositories for this are hosted at
> http://git.debian.org/ Ust and liburcu are available in Debian unstable
> and testing, but if you need packages for lenny, let me know. I should
> be able to backport them with little effort.
>
>
We are using testing and unstable but the problem we wanted to solve was
to have a simple way of including our own modifications to UST into the
boot images we create for the target machines. LTTV, however, is a different
matter, we will not do any modifications to lttv and then it's very nice to
be able to download the package directly. But still, testing and unstable
is just what we're looking for.
> ltt-control is nearly done, I have a manpage or two to write and it will
> be ready for upload. I can push a snapshot of this effort to a git
> repository if you're interested.
>
>
We most certainly are:D
> For lttv, I'm only waiting for the licensing to be updated before I can
> upload that package.
>
> Any patches you have please send them along and I'll make sure they get
> included.
>
>
Since my lttv patches are soon to be obsolete, also for us, I'll attache
only the patches that I did to the UST source tree.
Best Regards,
Kerstin
> Cheers
>
>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: 0001-Add-man-to-EXTRA_DIST-target-to-enable-clean-make-di.patch
Type: text/x-patch
Size: 578 bytes
Desc: not available
URL: <http://lists.casi.polymtl.ca/pipermail/lttng-dev/attachments/20100520/bebf18ad/attachment-0012.bin>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: 0002-Added-debian-packet-configuration-files.patch
Type: text/x-patch
Size: 7313 bytes
Desc: not available
URL: <http://lists.casi.polymtl.ca/pipermail/lttng-dev/attachments/20100520/bebf18ad/attachment-0013.bin>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: 0003-modified-make-to-build-ust-manual-as-info-page.patch
Type: text/x-patch
Size: 32271 bytes
Desc: not available
URL: <http://lists.casi.polymtl.ca/pipermail/lttng-dev/attachments/20100520/bebf18ad/attachment-0014.bin>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: 0004-Added-ust-clock.h-to-Makefile.am-to-enable-make-dist.patch
Type: text/x-patch
Size: 682 bytes
Desc: not available
URL: <http://lists.casi.polymtl.ca/pipermail/lttng-dev/attachments/20100520/bebf18ad/attachment-0015.bin>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: 0005-added-deb-make-target.patch
Type: text/x-patch
Size: 1356 bytes
Desc: not available
URL: <http://lists.casi.polymtl.ca/pipermail/lttng-dev/attachments/20100520/bebf18ad/attachment-0016.bin>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: 0006-ignore-generated-files.patch
Type: text/x-patch
Size: 551 bytes
Desc: not available
URL: <http://lists.casi.polymtl.ca/pipermail/lttng-dev/attachments/20100520/bebf18ad/attachment-0017.bin>
^ permalink raw reply [flat|nested] 13+ messages in thread
* [ltt-dev] debian packaging
2010-05-20 16:05 ` kerstin.jonsson
2010-05-20 16:05 ` kerstin.jonsson
2010-05-20 16:05 ` kerstin.jonsson
@ 2010-05-26 15:27 ` Jon Bernard
2010-05-26 17:00 ` kerstin jonsson
2010-05-30 13:41 ` Jon Bernard
2 siblings, 2 replies; 13+ messages in thread
From: Jon Bernard @ 2010-05-26 15:27 UTC (permalink / raw)
* kerstin.jonsson <kerstin.jonsson at ericsson.com> wrote:
> On 05/19/2010 05:23 PM, Jon Bernard wrote:
> >* kerstin.jonsson<kerstin.jonsson at ericsson.com> wrote:
> >>Hi,
> >>
> >>I have added a "deb" target to the ust and lttv make files, to
> >>enable build of debian packages, I also did some minor changes to
> >>the documentation - NB! not the contents, only to enable deb install
> >>of the manual as info pages.
> >>
> >>This is something that I did only for our own convenience, (i.e. the
> >>debian control files needs more work before these patches can be
> >>made public) we are using pbuilder to create boot images for
> >>different targets and then it's neat to have everything installable
> >>from deb packets.
> >>
> >>Is this something that may be of interest? I'd be happy to mail the
> >>patches. Or is the intention to keep the packaging separate from the
> >>source tree?
>
> Hi again, sorry! I was interrupted.
>
> >Hi Kerstin, thanks for your interest! I'm more than happy to
> >collaborate on the debian packaging.
> >
> >I much prefer to keep the debian packaging development separate from
> >upstream development. The git repositories for this are hosted at
> >http://git.debian.org/ Ust and liburcu are available in Debian
> >unstable and testing, but if you need packages for lenny, let me
> >know. I should be able to backport them with little effort.
>
> We are using testing and unstable but the problem we wanted to solve
> was to have a simple way of including our own modifications to UST
> into the boot images we create for the target machines. LTTV, however,
> is a different matter, we will not do any modifications to lttv and
> then it's very nice to be able to download the package directly. But
> still, testing and unstable is just what we're looking for.
The patches look quite good. With the exception of your manual/info page
modifications, the official packages should already include the changes
you've made. The debian repository for this work is found at [1].
I'll look into the info page changes and try to get something included
that works for you. Was there a specific reason for renaming the
manual.texinfo file?
[1]: http://git.debian.org/?p=collab-maint/ust.git;a=summary
> >ltt-control is nearly done, I have a manpage or two to write and it will
> >be ready for upload. I can push a snapshot of this effort to a git
> >repository if you're interested.
>
> We most certainly are:D
I've uploaded ltt-control and it's currently waiting in the NEW queue
for review [2]. I've also pushed a snapshot of the packaging work to [3]
if you're interested.
[2]: http://ftp-master.debian.org/new/ltt-control_0.86-19052010-1.html
[3]: http://git.debian.org/?p=users/jbernard/ltt-control.git;a=summary
--
Jon
^ permalink raw reply [flat|nested] 13+ messages in thread
* [ltt-dev] debian packaging
2010-05-26 15:27 ` Jon Bernard
@ 2010-05-26 17:00 ` kerstin jonsson
2010-05-30 13:41 ` Jon Bernard
1 sibling, 0 replies; 13+ messages in thread
From: kerstin jonsson @ 2010-05-26 17:00 UTC (permalink / raw)
On 05/26/2010 05:27 PM, Jon Bernard wrote:
> * kerstin.jonsson<kerstin.jonsson at ericsson.com> wrote:
>
>> On 05/19/2010 05:23 PM, Jon Bernard wrote:
>>
>>> * kerstin.jonsson<kerstin.jonsson at ericsson.com> wrote:
>>>
>>>> Hi,
>>>>
>>>> I have added a "deb" target to the ust and lttv make files, to
>>>> enable build of debian packages, I also did some minor changes to
>>>> the documentation - NB! not the contents, only to enable deb install
>>>> of the manual as info pages.
>>>>
>>>> This is something that I did only for our own convenience, (i.e. the
>>>> debian control files needs more work before these patches can be
>>>> made public) we are using pbuilder to create boot images for
>>>> different targets and then it's neat to have everything installable
>>>>
>>> >from deb packets.
>>>
>>>> Is this something that may be of interest? I'd be happy to mail the
>>>> patches. Or is the intention to keep the packaging separate from the
>>>> source tree?
>>>>
>> Hi again, sorry! I was interrupted.
>>
>>
>>> Hi Kerstin, thanks for your interest! I'm more than happy to
>>> collaborate on the debian packaging.
>>>
>>> I much prefer to keep the debian packaging development separate from
>>> upstream development. The git repositories for this are hosted at
>>> http://git.debian.org/ Ust and liburcu are available in Debian
>>> unstable and testing, but if you need packages for lenny, let me
>>> know. I should be able to backport them with little effort.
>>>
>> We are using testing and unstable but the problem we wanted to solve
>> was to have a simple way of including our own modifications to UST
>> into the boot images we create for the target machines. LTTV, however,
>> is a different matter, we will not do any modifications to lttv and
>> then it's very nice to be able to download the package directly. But
>> still, testing and unstable is just what we're looking for.
>>
> The patches look quite good. With the exception of your manual/info page
> modifications, the official packages should already include the changes
> you've made. The debian repository for this work is found at [1].
>
> I'll look into the info page changes and try to get something included
> that works for you. Was there a specific reason for renaming the
> manual.texinfo file?
>
Only that the automake target for some reason refused to build when
using the old name and I gave up trying to understand why, I'm not
on best terms with these modern automagic tools yet;D
> [1]: http://git.debian.org/?p=collab-maint/ust.git;a=summary
>
>
>>> ltt-control is nearly done, I have a manpage or two to write and it will
>>> be ready for upload. I can push a snapshot of this effort to a git
>>> repository if you're interested.
>>>
>> We most certainly are:D
>>
> I've uploaded ltt-control and it's currently waiting in the NEW queue
> for review [2]. I've also pushed a snapshot of the packaging work to [3]
> if you're interested.
>
> [2]: http://ftp-master.debian.org/new/ltt-control_0.86-19052010-1.html
> [3]: http://git.debian.org/?p=users/jbernard/ltt-control.git;a=summary
>
>
Ok. thanks!
^ permalink raw reply [flat|nested] 13+ messages in thread
* [ltt-dev] debian packaging
2010-05-26 15:27 ` Jon Bernard
2010-05-26 17:00 ` kerstin jonsson
@ 2010-05-30 13:41 ` Jon Bernard
1 sibling, 0 replies; 13+ messages in thread
From: Jon Bernard @ 2010-05-30 13:41 UTC (permalink / raw)
* Jon Bernard <jbernard at debian.org> wrote:
> * kerstin.jonsson <kerstin.jonsson at ericsson.com> wrote:
> > On 05/19/2010 05:23 PM, Jon Bernard wrote:
> > >* kerstin.jonsson<kerstin.jonsson at ericsson.com> wrote:
> > >>Hi,
> > >>
> > >>I have added a "deb" target to the ust and lttv make files, to
> > >>enable build of debian packages, I also did some minor changes to
> > >>the documentation - NB! not the contents, only to enable deb install
> > >>of the manual as info pages.
> > >>
> > >>This is something that I did only for our own convenience, (i.e. the
> > >>debian control files needs more work before these patches can be
> > >>made public) we are using pbuilder to create boot images for
> > >>different targets and then it's neat to have everything installable
> > >>from deb packets.
> > >>
> > >>Is this something that may be of interest? I'd be happy to mail the
> > >>patches. Or is the intention to keep the packaging separate from the
> > >>source tree?
> >
> > Hi again, sorry! I was interrupted.
> >
> > >Hi Kerstin, thanks for your interest! I'm more than happy to
> > >collaborate on the debian packaging.
> > >
> > >I much prefer to keep the debian packaging development separate from
> > >upstream development. The git repositories for this are hosted at
> > >http://git.debian.org/ Ust and liburcu are available in Debian
> > >unstable and testing, but if you need packages for lenny, let me
> > >know. I should be able to backport them with little effort.
> >
> > We are using testing and unstable but the problem we wanted to solve
> > was to have a simple way of including our own modifications to UST
> > into the boot images we create for the target machines. LTTV, however,
> > is a different matter, we will not do any modifications to lttv and
> > then it's very nice to be able to download the package directly. But
> > still, testing and unstable is just what we're looking for.
>
> The patches look quite good. With the exception of your manual/info page
> modifications, the official packages should already include the changes
> you've made. The debian repository for this work is found at [1].
>
> I'll look into the info page changes and try to get something included
> that works for you. Was there a specific reason for renaming the
> manual.texinfo file?
>
> [1]: http://git.debian.org/?p=collab-maint/ust.git;a=summary
>
> > >ltt-control is nearly done, I have a manpage or two to write and it will
> > >be ready for upload. I can push a snapshot of this effort to a git
> > >repository if you're interested.
> >
> > We most certainly are:D
>
> I've uploaded ltt-control and it's currently waiting in the NEW queue
> for review [2]. I've also pushed a snapshot of the packaging work to [3]
> if you're interested.
>
> [2]: http://ftp-master.debian.org/new/ltt-control_0.86-19052010-1.html
> [3]: http://git.debian.org/?p=users/jbernard/ltt-control.git;a=summary
ltt-control was accepted this morning, official repository is at:
http://git.debian.org/?p=collab-maint/ltt-control.git;a=summary
--
Jon
^ permalink raw reply [flat|nested] 13+ messages in thread