* [ltt-dev] the problem of using LTTNG on ARM
2009-01-19 8:46 ` [ltt-dev] the problem of using LTTNG on ARM long xu
@ 2009-01-19 8:46 ` long xu
2009-01-19 8:46 ` long xu
2009-01-19 9:17 ` Akyurek, Ali (EXT)
2 siblings, 0 replies; 6+ messages in thread
From: long xu @ 2009-01-19 8:46 UTC (permalink / raw)
---------- Forwarded message ----------
From: long xu <long.x.xu@gmail.com>
Date: 2009/1/16
Subject: the problem of using LTTNG on ARM
To: mlm-lttv-dev-help at krystal.dyndns.org
HELLO,
I have built the ltt-control package for the ARM,
and the command lttctl de lttd can work now.
But i can't crosse-build the markers-userspace, it
like that the markers-userspace can't support the ARM.
When i use the ltt-armall.sh, it trace like this:
-----------------------------------------------------------------------
ltt-armall.sh
Connecting all markers
/usr/bin/ltt-armall.sh: line 5: awk: not found
Connecting high-rate markers to tap
/usr/bin/ltt-armall.sh: line 41: awk: not found
-----------------------------------------------------------------------
and when i use the lttctl -C -w /tmp/trace1 trace1:
--------------------------------------------------------------------------------
lttctl -C -w /tmp/trace1 trace1
Linux Trace Toolkit Trace Control 0.62-23122008
Controlling trace : trace1
lttctl: Creating trace
lttctl: Forking lttd
Error in executing the lttd daemon: No such file or directory
lttd process running failed
--------------------------------------------------------------------------------
whether it need to install the markers-userspace before use
the commands? or there is same other problems?
Thanks,
Best regard,
XU Long
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.casi.polymtl.ca/pipermail/ltt-dev/attachments/20090119/59d09631/attachment-0001.htm>
^ permalink raw reply [flat|nested] 6+ messages in thread
* [ltt-dev] the problem of using LTTNG on ARM
2009-01-19 8:46 ` [ltt-dev] the problem of using LTTNG on ARM long xu
2009-01-19 8:46 ` long xu
@ 2009-01-19 8:46 ` long xu
2009-01-19 9:17 ` Akyurek, Ali (EXT)
2 siblings, 0 replies; 6+ messages in thread
From: long xu @ 2009-01-19 8:46 UTC (permalink / raw)
---------- Forwarded message ----------
From: long xu <long.x.xu@gmail.com>
Date: 2009/1/16
Subject: the problem of using LTTNG on ARM
To: mlm-lttv-dev-help at krystal.dyndns.org
HELLO,
I have built the ltt-control package for the ARM,
and the command lttctl de lttd can work now.
But i can't crosse-build the markers-userspace, it
like that the markers-userspace can't support the ARM.
When i use the ltt-armall.sh, it trace like this:
-----------------------------------------------------------------------
ltt-armall.sh
Connecting all markers
/usr/bin/ltt-armall.sh: line 5: awk: not found
Connecting high-rate markers to tap
/usr/bin/ltt-armall.sh: line 41: awk: not found
-----------------------------------------------------------------------
and when i use the lttctl -C -w /tmp/trace1 trace1:
--------------------------------------------------------------------------------
lttctl -C -w /tmp/trace1 trace1
Linux Trace Toolkit Trace Control 0.62-23122008
Controlling trace : trace1
lttctl: Creating trace
lttctl: Forking lttd
Error in executing the lttd daemon: No such file or directory
lttd process running failed
--------------------------------------------------------------------------------
whether it need to install the markers-userspace before use
the commands? or there is same other problems?
Thanks,
Best regard,
XU Long
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.casi.polymtl.ca/pipermail/lttng-dev/attachments/20090119/59d09631/attachment-0003.htm>
^ permalink raw reply [flat|nested] 6+ messages in thread
* [ltt-dev] the problem of using LTTNG on ARM
2009-01-19 8:46 ` [ltt-dev] the problem of using LTTNG on ARM long xu
2009-01-19 8:46 ` long xu
2009-01-19 8:46 ` long xu
@ 2009-01-19 9:17 ` Akyurek, Ali (EXT)
2009-01-19 9:17 ` Akyurek, Ali (EXT)
2009-01-19 9:17 ` Akyurek, Ali (EXT)
2 siblings, 2 replies; 6+ messages in thread
From: Akyurek, Ali (EXT) @ 2009-01-19 9:17 UTC (permalink / raw)
Hi, exactly same problems i've met before.
1.It seems your shell doesn't have awk utility.I think you use
busybox.Just build busybox with CONFIG_AWK = y
Then you'll have awk.
2.Unable to find lttd. be sure that if you used a prefix while
configuring the ltt-ctl. Then ltt-ctl wants to find lttd in that folder.
For example i configured ltt-ctl as follows
./configure ... --prefix=/home/user/ltt
After make & make install lttd file is in my host folder
/home/user/ltt/bin/lttd
In the target, ltt-ctl searchs lttd in this path
(/home/user/ltt/bin/lttd).
Hope these help.
________________________________
Von: long xu [mailto:long.x.xu at gmail.com]
Gesendet: Montag, 19. Januar 2009 09:47
An: ltt-dev at lists.casi.polymtl.ca
Betreff: [ltt-dev] the problem of using LTTNG on ARM
---------- Forwarded message ----------
From: long xu <long.x.xu@gmail.com>
Date: 2009/1/16
Subject: the problem of using LTTNG on ARM
To: mlm-lttv-dev-help at krystal.dyndns.org
HELLO,
I have built the ltt-control package for the ARM,
and the command lttctl de lttd can work now.
But i can't crosse-build the markers-userspace, it
like that the markers-userspace can't support the ARM.
When i use the ltt-armall.sh, it trace like this:
-----------------------------------------------------------------------
ltt-armall.sh
Connecting all markers
/usr/bin/ltt-armall.sh: line 5: awk: not found
Connecting high-rate markers to tap
/usr/bin/ltt-armall.sh: line 41: awk: not found
-----------------------------------------------------------------------
and when i use the lttctl -C -w /tmp/trace1 trace1:
------------------------------------------------------------------------
--------
lttctl -C -w /tmp/trace1 trace1
Linux Trace Toolkit Trace Control 0.62-23122008
Controlling trace : trace1
lttctl: Creating trace
lttctl: Forking lttd
Error in executing the lttd daemon: No such file or directory
lttd process running failed
------------------------------------------------------------------------
--------
whether it need to install the markers-userspace before use
the commands? or there is same other problems?
Thanks,
Best regard,
XU Long
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.casi.polymtl.ca/pipermail/lttng-dev/attachments/20090119/1ea97562/attachment-0001.htm>
^ permalink raw reply [flat|nested] 6+ messages in thread
* [ltt-dev] the problem of using LTTNG on ARM
2009-01-19 9:17 ` Akyurek, Ali (EXT)
@ 2009-01-19 9:17 ` Akyurek, Ali (EXT)
2009-01-19 9:17 ` Akyurek, Ali (EXT)
1 sibling, 0 replies; 6+ messages in thread
From: Akyurek, Ali (EXT) @ 2009-01-19 9:17 UTC (permalink / raw)
Hi, exactly same problems i've met before.
1.It seems your shell doesn't have awk utility.I think you use
busybox.Just build busybox with CONFIG_AWK = y
Then you'll have awk.
2.Unable to find lttd. be sure that if you used a prefix while
configuring the ltt-ctl. Then ltt-ctl wants to find lttd in that folder.
For example i configured ltt-ctl as follows
./configure ... --prefix=/home/user/ltt
After make & make install lttd file is in my host folder
/home/user/ltt/bin/lttd
In the target, ltt-ctl searchs lttd in this path
(/home/user/ltt/bin/lttd).
Hope these help.
________________________________
Von: long xu [mailto:long.x.xu at gmail.com]
Gesendet: Montag, 19. Januar 2009 09:47
An: ltt-dev at lists.casi.polymtl.ca
Betreff: [ltt-dev] the problem of using LTTNG on ARM
---------- Forwarded message ----------
From: long xu <long.x.xu@gmail.com>
Date: 2009/1/16
Subject: the problem of using LTTNG on ARM
To: mlm-lttv-dev-help at krystal.dyndns.org
HELLO,
I have built the ltt-control package for the ARM,
and the command lttctl de lttd can work now.
But i can't crosse-build the markers-userspace, it
like that the markers-userspace can't support the ARM.
When i use the ltt-armall.sh, it trace like this:
-----------------------------------------------------------------------
ltt-armall.sh
Connecting all markers
/usr/bin/ltt-armall.sh: line 5: awk: not found
Connecting high-rate markers to tap
/usr/bin/ltt-armall.sh: line 41: awk: not found
-----------------------------------------------------------------------
and when i use the lttctl -C -w /tmp/trace1 trace1:
------------------------------------------------------------------------
--------
lttctl -C -w /tmp/trace1 trace1
Linux Trace Toolkit Trace Control 0.62-23122008
Controlling trace : trace1
lttctl: Creating trace
lttctl: Forking lttd
Error in executing the lttd daemon: No such file or directory
lttd process running failed
------------------------------------------------------------------------
--------
whether it need to install the markers-userspace before use
the commands? or there is same other problems?
Thanks,
Best regard,
XU Long
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.casi.polymtl.ca/pipermail/ltt-dev/attachments/20090119/1ea97562/attachment.htm>
^ permalink raw reply [flat|nested] 6+ messages in thread
* [ltt-dev] the problem of using LTTNG on ARM
2009-01-19 9:17 ` Akyurek, Ali (EXT)
2009-01-19 9:17 ` Akyurek, Ali (EXT)
@ 2009-01-19 9:17 ` Akyurek, Ali (EXT)
1 sibling, 0 replies; 6+ messages in thread
From: Akyurek, Ali (EXT) @ 2009-01-19 9:17 UTC (permalink / raw)
Hi, exactly same problems i've met before.
1.It seems your shell doesn't have awk utility.I think you use
busybox.Just build busybox with CONFIG_AWK = y
Then you'll have awk.
2.Unable to find lttd. be sure that if you used a prefix while
configuring the ltt-ctl. Then ltt-ctl wants to find lttd in that folder.
For example i configured ltt-ctl as follows
./configure ... --prefix=/home/user/ltt
After make & make install lttd file is in my host folder
/home/user/ltt/bin/lttd
In the target, ltt-ctl searchs lttd in this path
(/home/user/ltt/bin/lttd).
Hope these help.
________________________________
Von: long xu [mailto:long.x.xu at gmail.com]
Gesendet: Montag, 19. Januar 2009 09:47
An: ltt-dev at lists.casi.polymtl.ca
Betreff: [ltt-dev] the problem of using LTTNG on ARM
---------- Forwarded message ----------
From: long xu <long.x.xu@gmail.com>
Date: 2009/1/16
Subject: the problem of using LTTNG on ARM
To: mlm-lttv-dev-help at krystal.dyndns.org
HELLO,
I have built the ltt-control package for the ARM,
and the command lttctl de lttd can work now.
But i can't crosse-build the markers-userspace, it
like that the markers-userspace can't support the ARM.
When i use the ltt-armall.sh, it trace like this:
-----------------------------------------------------------------------
ltt-armall.sh
Connecting all markers
/usr/bin/ltt-armall.sh: line 5: awk: not found
Connecting high-rate markers to tap
/usr/bin/ltt-armall.sh: line 41: awk: not found
-----------------------------------------------------------------------
and when i use the lttctl -C -w /tmp/trace1 trace1:
------------------------------------------------------------------------
--------
lttctl -C -w /tmp/trace1 trace1
Linux Trace Toolkit Trace Control 0.62-23122008
Controlling trace : trace1
lttctl: Creating trace
lttctl: Forking lttd
Error in executing the lttd daemon: No such file or directory
lttd process running failed
------------------------------------------------------------------------
--------
whether it need to install the markers-userspace before use
the commands? or there is same other problems?
Thanks,
Best regard,
XU Long
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.casi.polymtl.ca/pipermail/lttng-dev/attachments/20090119/1ea97562/attachment-0002.htm>
^ permalink raw reply [flat|nested] 6+ messages in thread