* [ltt-dev] Time in trace passes too slowly
@ 2011-04-12 22:05 Francis Giraldeau
2011-04-13 15:38 ` Mathieu Desnoyers
[not found] ` <BLU0-SMTP705696D47DFABC88D7F84596AA0@phx.gbl>
0 siblings, 2 replies; 3+ messages in thread
From: Francis Giraldeau @ 2011-04-12 22:05 UTC (permalink / raw)
Hi,
In a trace, the time difference between two timestamps doesn't match the
time it should have elapsed. For example, when measuring the duration of
"sleep 1" in the trace, 0.358s is obtained. The real duration of the
sleep is indeed 1 second. The error seems proportional to a constant
factor.
I get this behavior on a 32 bits Ubuntu with 2.6.35-24-lttng from the
PPA. I'm running the same version of kernel but configured with 64 bits
and durations are correct.
I put a sample trace here:
http://secretaire.dorsal.polymtl.ca/~fgiraldeau/sleep-1x-1sec.tar.gz
Seems a bug to me, or maybe I'm doing something wrong?
Cheer,
Francis
^ permalink raw reply [flat|nested] 3+ messages in thread
* [ltt-dev] Time in trace passes too slowly
2011-04-12 22:05 [ltt-dev] Time in trace passes too slowly Francis Giraldeau
@ 2011-04-13 15:38 ` Mathieu Desnoyers
[not found] ` <BLU0-SMTP705696D47DFABC88D7F84596AA0@phx.gbl>
1 sibling, 0 replies; 3+ messages in thread
From: Mathieu Desnoyers @ 2011-04-13 15:38 UTC (permalink / raw)
* Francis Giraldeau (francis.giraldeau at usherbrooke.ca) wrote:
> Hi,
>
> In a trace, the time difference between two timestamps doesn't match the
> time it should have elapsed. For example, when measuring the duration of
> "sleep 1" in the trace, 0.358s is obtained. The real duration of the
> sleep is indeed 1 second. The error seems proportional to a constant
> factor.
>
> I get this behavior on a 32 bits Ubuntu with 2.6.35-24-lttng from the
> PPA. I'm running the same version of kernel but configured with 64 bits
> and durations are correct.
>
> I put a sample trace here:
>
> http://secretaire.dorsal.polymtl.ca/~fgiraldeau/sleep-1x-1sec.tar.gz
>
> Seems a bug to me, or maybe I'm doing something wrong?
What is the output of your /proc/cpuinfo ?
Can you paste your dmesg ?
Thanks,
Mathieu
>
> Cheer,
>
> Francis
>
>
> _______________________________________________
> ltt-dev mailing list
> ltt-dev at lists.casi.polymtl.ca
> http://lists.casi.polymtl.ca/cgi-bin/mailman/listinfo/ltt-dev
>
--
Mathieu Desnoyers
Operating System Efficiency R&D Consultant
EfficiOS Inc.
http://www.efficios.com
^ permalink raw reply [flat|nested] 3+ messages in thread
* [ltt-dev] Time in trace passes too slowly
[not found] ` <BLU0-SMTP705696D47DFABC88D7F84596AA0@phx.gbl>
@ 2011-04-18 14:11 ` Francis Giraldeau
0 siblings, 0 replies; 3+ messages in thread
From: Francis Giraldeau @ 2011-04-18 14:11 UTC (permalink / raw)
On Wed, 2011-04-13 at 11:38 -0400, Mathieu Desnoyers wrote:
> * Francis Giraldeau (francis.giraldeau at usherbrooke.ca) wrote:
> > Hi,
> >
> > In a trace, the time difference between two timestamps doesn't match the
> > time it should have elapsed. For example, when measuring the duration of
> > "sleep 1" in the trace, 0.358s is obtained. The real duration of the
> > sleep is indeed 1 second. The error seems proportional to a constant
> > factor.
> >
> > I get this behavior on a 32 bits Ubuntu with 2.6.35-24-lttng from the
> > PPA. I'm running the same version of kernel but configured with 64 bits
> > and durations are correct.
> >
> > I put a sample trace here:
> >
> > http://secretaire.dorsal.polymtl.ca/~fgiraldeau/sleep-1x-1sec.tar.gz
> >
> > Seems a bug to me, or maybe I'm doing something wrong?
>
> What is the output of your /proc/cpuinfo ?
>
> Can you paste your dmesg ?
The required information is attached, but I performed the trace again
and the problem does not occur. I tried to trace after sleep cycle,
changing the CPU frequency, still correct. I don't know what happened to
get those weird timestamps. Since I can't reproduce the problem, I will
not be able to tell if it's solved... If I discover an effective way to
reproduce the wrong behavior, I will post it.
Cheer,
Francis
-------------- next part --------------
processor : 0
vendor_id : GenuineIntel
cpu family : 6
model : 14
model name : Genuine Intel(R) CPU T2400 @ 1.83GHz
stepping : 8
cpu MHz : 1000.000
cache size : 2048 KB
physical id : 0
siblings : 2
core id : 0
cpu cores : 2
apicid : 0
initial apicid : 0
fdiv_bug : no
hlt_bug : no
f00f_bug : no
coma_bug : no
fpu : yes
fpu_exception : yes
cpuid level : 10
wp : yes
flags : fpu vme de pse tsc msr pae mce cx8 apic mtrr pge mca cmov clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe nx constant_tsc arch_perfmon bts aperfmperf pni monitor vmx est tm2 xtpr pdcm dts
bogomips : 3661.75
clflush size : 64
cache_alignment : 64
address sizes : 32 bits physical, 32 bits virtual
power management:
processor : 1
vendor_id : GenuineIntel
cpu family : 6
model : 14
model name : Genuine Intel(R) CPU T2400 @ 1.83GHz
stepping : 8
cpu MHz : 1000.000
cache size : 2048 KB
physical id : 0
siblings : 2
core id : 1
cpu cores : 2
apicid : 1
initial apicid : 1
fdiv_bug : no
hlt_bug : no
f00f_bug : no
coma_bug : no
fpu : yes
fpu_exception : yes
cpuid level : 10
wp : yes
flags : fpu vme de pse tsc msr pae mce cx8 apic mtrr pge mca cmov clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe nx constant_tsc arch_perfmon bts aperfmperf pni monitor vmx est tm2 xtpr pdcm dts
bogomips : 3661.77
clflush size : 64
cache_alignment : 64
address sizes : 32 bits physical, 32 bits virtual
power management:
-------------- next part --------------
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 2.6.35-24-lttng (buildd at nannyberry) (gcc version 4.4.5 (Ubuntu/Linaro 4.4.4-14ubuntu5) ) #37~lttng1-Ubuntu SMP Sun Oct 31 05:21:09 UTC 2010 (Ubuntu 2.6.35-24.37~lttng1-lttng 2.6.35.7)
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
[ 0.000000] BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000ede00 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 000000007f0bd000 (usable)
[ 0.000000] BIOS-e820: 000000007f0bd000 - 000000007f2be000 (ACPI NVS)
[ 0.000000] BIOS-e820: 000000007f2be000 - 000000007feb9000 (ACPI data)
[ 0.000000] BIOS-e820: 000000007feb9000 - 000000007feef000 (ACPI NVS)
[ 0.000000] BIOS-e820: 000000007feef000 - 000000007ff00000 (ACPI data)
[ 0.000000] BIOS-e820: 000000007ff00000 - 0000000080000000 (reserved)
[ 0.000000] BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved)
[ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
[ 0.000000] BIOS-e820: 00000000fed14000 - 00000000fed1a000 (reserved)
[ 0.000000] BIOS-e820: 00000000fed1c000 - 00000000fed20000 (reserved)
[ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
[ 0.000000] BIOS-e820: 00000000ffe00000 - 0000000100000000 (reserved)
[ 0.000000] Notice: NX (Execute Disable) protection cannot be enabled: non-PAE kernel!
[ 0.000000] DMI 2.4 present.
[ 0.000000] e820 update range: 0000000000000000 - 0000000000001000 (usable) ==> (reserved)
[ 0.000000] e820 remove range: 00000000000a0000 - 0000000000100000 (usable)
[ 0.000000] last_pfn = 0x7f0bd max_arch_pfn = 0x100000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF uncachable
[ 0.000000] C0000-CFFFF write-protect
[ 0.000000] D0000-DFFFF uncachable
[ 0.000000] E0000-FFFFF write-protect
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 0FFE00000 mask FFFE00000 write-protect
[ 0.000000] 1 base 000000000 mask F80000000 write-back
[ 0.000000] 2 base 07FF00000 mask FFFF00000 uncachable
[ 0.000000] 3 disabled
[ 0.000000] 4 disabled
[ 0.000000] 5 disabled
[ 0.000000] 6 disabled
[ 0.000000] 7 disabled
[ 0.000000] PAT not supported by CPU.
[ 0.000000] e820 update range: 0000000000002000 - 0000000000010000 (usable) ==> (reserved)
[ 0.000000] Scanning 1 areas for low memory corruption
[ 0.000000] modified physical RAM map:
[ 0.000000] modified: 0000000000000000 - 0000000000001000 (reserved)
[ 0.000000] modified: 0000000000001000 - 0000000000002000 (usable)
[ 0.000000] modified: 0000000000002000 - 0000000000010000 (reserved)
[ 0.000000] modified: 0000000000010000 - 000000000009fc00 (usable)
[ 0.000000] modified: 000000000009fc00 - 00000000000a0000 (reserved)
[ 0.000000] modified: 00000000000ede00 - 0000000000100000 (reserved)
[ 0.000000] modified: 0000000000100000 - 000000007f0bd000 (usable)
[ 0.000000] modified: 000000007f0bd000 - 000000007f2be000 (ACPI NVS)
[ 0.000000] modified: 000000007f2be000 - 000000007feb9000 (ACPI data)
[ 0.000000] modified: 000000007feb9000 - 000000007feef000 (ACPI NVS)
[ 0.000000] modified: 000000007feef000 - 000000007ff00000 (ACPI data)
[ 0.000000] modified: 000000007ff00000 - 0000000080000000 (reserved)
[ 0.000000] modified: 00000000e0000000 - 00000000f0000000 (reserved)
[ 0.000000] modified: 00000000fec00000 - 00000000fec01000 (reserved)
[ 0.000000] modified: 00000000fed14000 - 00000000fed1a000 (reserved)
[ 0.000000] modified: 00000000fed1c000 - 00000000fed20000 (reserved)
[ 0.000000] modified: 00000000fee00000 - 00000000fee01000 (reserved)
[ 0.000000] modified: 00000000ffe00000 - 0000000100000000 (reserved)
[ 0.000000] initial memory mapped : 0 - 00c00000
[ 0.000000] init_memory_mapping: 0000000000000000-00000000377fe000
[ 0.000000] 0000000000 - 0000400000 page 4k
[ 0.000000] 0000400000 - 0037400000 page 2M
[ 0.000000] 0037400000 - 00377fe000 page 4k
[ 0.000000] kernel direct mapping tables up to 377fe000 @ 15000-1a000
[ 0.000000] RAMDISK: 370b5000 - 37ff0000
[ 0.000000] Allocated new RAMDISK: 009b1000 - 018ebc64
[ 0.000000] Move RAMDISK from 00000000370b5000 - 0000000037fefc63 to 009b1000 - 018ebc63
[ 0.000000] ACPI: RSDP 000fe020 00024 (v02 APPLE )
[ 0.000000] ACPI: XSDT 7fefd120 00074 (v01 APPLE Apple00 00000055 01000013)
[ 0.000000] ACPI: FACP 7fefb000 000F4 (v03 APPLE Apple00 00000055 Loki 0000005F)
[ 0.000000] ACPI: DSDT 7fef0000 048C0 (v01 APPLE MacBookP 00010001 INTL 20050309)
[ 0.000000] ACPI: FACS 7febb000 00040
[ 0.000000] ACPI: HPET 7fefa000 00038 (v01 APPLE Apple00 00000001 Loki 0000005F)
[ 0.000000] ACPI: APIC 7fef9000 00068 (v01 APPLE Apple00 00000001 Loki 0000005F)
[ 0.000000] ACPI: MCFG 7fef8000 0003C (v01 APPLE Apple00 00000001 Loki 0000005F)
[ 0.000000] ACPI: ASF! 7fef7000 0009C (v32 APPLE Apple00 00000001 Loki 0000005F)
[ 0.000000] ACPI: SBST 7fef6000 00030 (v01 APPLE Apple00 00000001 Loki 0000005F)
[ 0.000000] ACPI: ECDT 7fef5000 00053 (v01 APPLE Apple00 00000001 Loki 0000005F)
[ 0.000000] ACPI: SSDT 7feb6000 0064F (v01 APPLE SataPri 00001000 INTL 20050309)
[ 0.000000] ACPI: SSDT 7feb5000 0069C (v01 APPLE SataSec 00001000 INTL 20050309)
[ 0.000000] ACPI: SSDT 7feef000 004DC (v01 APPLE CpuPm 00003000 INTL 20050309)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] 1144MB HIGHMEM available.
[ 0.000000] 887MB LOWMEM available.
[ 0.000000] mapped low ram: 0 - 377fe000
[ 0.000000] low ram: 0 - 377fe000
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0x00000001 -> 0x00001000
[ 0.000000] Normal 0x00001000 -> 0x000377fe
[ 0.000000] HighMem 0x000377fe -> 0x0007f0bd
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] early_node_map[3] active PFN ranges
[ 0.000000] 0: 0x00000001 -> 0x00000002
[ 0.000000] 0: 0x00000010 -> 0x0000009f
[ 0.000000] 0: 0x00000100 -> 0x0007f0bd
[ 0.000000] On node 0 totalpages: 520269
[ 0.000000] free_area_init_node: node 0, pgdat c0807e40, node_mem_map c18ed020
[ 0.000000] DMA zone: 32 pages used for memmap
[ 0.000000] DMA zone: 0 pages reserved
[ 0.000000] DMA zone: 3952 pages, LIFO batch:0
[ 0.000000] Normal zone: 1744 pages used for memmap
[ 0.000000] Normal zone: 221486 pages, LIFO batch:31
[ 0.000000] HighMem zone: 2290 pages used for memmap
[ 0.000000] HighMem zone: 290765 pages, LIFO batch:31
[ 0.000000] Using APIC driver default
[ 0.000000] ACPI: PM-Timer IO Port: 0x408
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[ 0.000000] ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 1, version 32, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[ 0.000000] SMP: Allowing 2 CPUs, 0 hotplug CPUs
[ 0.000000] nr_irqs_gsi: 40
[ 0.000000] early_res array is doubled to 64 at [16000 - 167ff]
[ 0.000000] PM: Registered nosave memory: 0000000000002000 - 0000000000010000
[ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
[ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000ee000
[ 0.000000] PM: Registered nosave memory: 00000000000ee000 - 0000000000100000
[ 0.000000] Allocating PCI resources starting at 80000000 (gap: 80000000:60000000)
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] setup_percpu: NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:2 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 14 pages/cpu @c2c00000 s36480 r0 d20864 u2097152
[ 0.000000] pcpu-alloc: s36480 r0 d20864 u2097152 alloc=1*4194304
[ 0.000000] pcpu-alloc: [0] 0 1
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 516203
[ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-2.6.35-24-lttng root=UUID=1b4d9240-fa4b-43c1-a188-e3fb72b88216 ro quiet splash
[ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
[ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 0.000000] Enabling fast FPU save and restore... done.
[ 0.000000] Enabling unmasked SIMD FPU exception support... done.
[ 0.000000] Initializing CPU#0
[ 0.000000] allocated 10407600 bytes of page_cgroup
[ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
[ 0.000000] Subtract (51 early reservations)
[ 0.000000] #1 [0000001000 - 0000002000] EX TRAMPOLINE
[ 0.000000] #2 [0000100000 - 00009accdc] TEXT DATA BSS
[ 0.000000] #3 [000009fc00 - 0000100000] BIOS reserved
[ 0.000000] #4 [00009ad000 - 00009b0211] BRK
[ 0.000000] #5 [0000010000 - 0000011000] TRAMPOLINE
[ 0.000000] #6 [0000011000 - 0000015000] ACPI WAKEUP
[ 0.000000] #7 [0000015000 - 0000016000] PGTABLE
[ 0.000000] #8 [00009b1000 - 00018ec000] NEW RAMDISK
[ 0.000000] #9 [00018ec000 - 00018ed000] BOOTMEM
[ 0.000000] #10 [00018ed000 - 00028d5000] BOOTMEM
[ 0.000000] #11 [00028d5000 - 00028d5004] BOOTMEM
[ 0.000000] #12 [00028d5040 - 00028d5100] BOOTMEM
[ 0.000000] #13 [00028d5100 - 00028d5154] BOOTMEM
[ 0.000000] #14 [00028d5180 - 00028d8180] BOOTMEM
[ 0.000000] #15 [00028d8180 - 00028d81ec] BOOTMEM
[ 0.000000] #16 [00028d8200 - 00028de200] BOOTMEM
[ 0.000000] #17 [00028de200 - 00028de225] BOOTMEM
[ 0.000000] #18 [00028de240 - 00028de267] BOOTMEM
[ 0.000000] #19 [00028de280 - 00028de478] BOOTMEM
[ 0.000000] #20 [00028de480 - 00028de4c0] BOOTMEM
[ 0.000000] #21 [00028de4c0 - 00028de500] BOOTMEM
[ 0.000000] #22 [00028de500 - 00028de540] BOOTMEM
[ 0.000000] #23 [00028de540 - 00028de580] BOOTMEM
[ 0.000000] #24 [00028de580 - 00028de5c0] BOOTMEM
[ 0.000000] #25 [00028de5c0 - 00028de600] BOOTMEM
[ 0.000000] #26 [00028de600 - 00028de640] BOOTMEM
[ 0.000000] #27 [00028de640 - 00028de680] BOOTMEM
[ 0.000000] #28 [00028de680 - 00028de6c0] BOOTMEM
[ 0.000000] #29 [00028de6c0 - 00028de700] BOOTMEM
[ 0.000000] #30 [00028de700 - 00028de740] BOOTMEM
[ 0.000000] #31 [00028de740 - 00028de780] BOOTMEM
[ 0.000000] #32 [00028de780 - 00028de7c0] BOOTMEM
[ 0.000000] #33 [00028de7c0 - 00028de800] BOOTMEM
[ 0.000000] #34 [00028de800 - 00028de840] BOOTMEM
[ 0.000000] #35 [00028de840 - 00028de850] BOOTMEM
[ 0.000000] #36 [00028de880 - 00028de890] BOOTMEM
[ 0.000000] #37 [00028de8c0 - 00028de928] BOOTMEM
[ 0.000000] #38 [00028de940 - 00028de9a8] BOOTMEM
[ 0.000000] #39 [0002c00000 - 0002c0e000] BOOTMEM
[ 0.000000] #40 [0002e00000 - 0002e0e000] BOOTMEM
[ 0.000000] #41 [00028e09c0 - 00028e09c4] BOOTMEM
[ 0.000000] #42 [00028e0a00 - 00028e0a04] BOOTMEM
[ 0.000000] #43 [00028e0a40 - 00028e0a48] BOOTMEM
[ 0.000000] #44 [00028e0a80 - 00028e0a88] BOOTMEM
[ 0.000000] #45 [00028e0ac0 - 00028e0b68] BOOTMEM
[ 0.000000] #46 [00028e0b80 - 00028e0be8] BOOTMEM
[ 0.000000] #47 [00028e0c00 - 00028e4c00] BOOTMEM
[ 0.000000] #48 [00028e4c00 - 0002964c00] BOOTMEM
[ 0.000000] #49 [0002964c00 - 00029a4c00] BOOTMEM
[ 0.000000] #50 [0002e0e000 - 00037faeb0] BOOTMEM
[ 0.000000] Initializing HighMem for node 0 (000377fe:0007f0bd)
[ 0.000000] Memory: 2029156k/2081524k available (4949k kernel code, 51920k reserved, 2362k data, 684k init, 1172220k highmem)
[ 0.000000] virtual kernel memory layout:
[ 0.000000] fixmap : 0xfff16000 - 0xfffff000 ( 932 kB)
[ 0.000000] pkmap : 0xff800000 - 0xffc00000 (4096 kB)
[ 0.000000] vmalloc : 0xf7ffe000 - 0xff7fe000 ( 120 MB)
[ 0.000000] lowmem : 0xc0000000 - 0xf77fe000 ( 887 MB)
[ 0.000000] .init : 0xc0825000 - 0xc08d0000 ( 684 kB)
[ 0.000000] .data : 0xc05d5792 - 0xc0824368 (2362 kB)
[ 0.000000] .text : 0xc0100000 - 0xc05d5792 (4949 kB)
[ 0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok.
[ 0.000000] SLUB: Genslabs=13, HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] RCU dyntick-idle grace-period acceleration is enabled.
[ 0.000000] RCU-based detection of stalled CPUs is disabled.
[ 0.000000] Verbose stalled-CPUs detection is disabled.
[ 0.000000] NR_IRQS:2304 nr_irqs:512
[ 0.000000] Extended CMOS year: 2000
[ 0.000000] Console: colour VGA+ 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] hpet clockevent registered
[ 0.000000] Fast TSC calibration failed
[ 0.000000] TSC: Unable to calibrate against PIT
[ 0.000000] TSC: using HPET reference calibration
[ 0.000000] Detected 1830.876 MHz processor.
[ 0.016006] Calibrating delay loop (skipped), value calculated using timer frequency.. 3661.75 BogoMIPS (lpj=7323504)
[ 0.016012] pid_max: default: 32768 minimum: 301
[ 0.016033] Security Framework initialized
[ 0.016053] AppArmor: AppArmor initialized
[ 0.016055] Yama: becoming mindful.
[ 0.016121] Mount-cache hash table entries: 512
[ 0.016269] Initializing cgroup subsys ns
[ 0.016275] Initializing cgroup subsys cpuacct
[ 0.016280] Initializing cgroup subsys memory
[ 0.016291] Initializing cgroup subsys devices
[ 0.016294] Initializing cgroup subsys freezer
[ 0.016297] Initializing cgroup subsys net_cls
[ 0.016328] CPU: Physical Processor ID: 0
[ 0.016330] CPU: Processor Core ID: 0
[ 0.016334] mce: CPU supports 6 MCE banks
[ 0.016345] CPU0: Thermal monitoring enabled (TM2)
[ 0.016349] using mwait in idle threads.
[ 0.016357] Performance Events: Core events, core PMU driver.
[ 0.016368] ... version: 1
[ 0.016370] ... bit width: 40
[ 0.016372] ... generic registers: 2
[ 0.016375] ... value mask: 000000ffffffffff
[ 0.016377] ... max period: 000000007fffffff
[ 0.016380] ... fixed-purpose events: 0
[ 0.016382] ... event mask: 0000000000000003
[ 0.020187] ACPI: Core revision 20100428
[ 0.036009] ftrace: converting mcount calls to 0f 1f 44 00 00
[ 0.036016] ftrace: allocating 21862 entries in 43 pages
[ 0.040058] Enabling APIC mode: Flat. Using 1 I/O APICs
[ 0.040439] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.081442] CPU0: Genuine Intel(R) CPU T2400 @ 1.83GHz stepping 08
[ 0.084000] Booting Node 0, Processors #1 Ok.
[ 0.020000] Initializing CPU#1
[ 0.168061] checking TSC synchronization [CPU#0 -> CPU#1]: passed.
[ 0.168308] Brought up 2 CPUs
[ 0.168312] Total of 2 processors activated (7323.53 BogoMIPS).
[ 0.168880] devtmpfs: initialized
[ 0.169216] regulator: core version 0.5
[ 0.169251] Time: 19:02:17 Date: 04/17/11
[ 0.169298] NET: Registered protocol family 16
[ 0.169328] Trying to unpack rootfs image as initramfs...
[ 0.169451] EISA bus registered
[ 0.169462] ACPI: bus type pci registered
[ 0.169548] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[ 0.169552] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820
[ 0.169555] PCI: Using MMCONFIG for extended config space
[ 0.169558] PCI: Using configuration type 1 for base access
[ 0.176160] bio: create slab <bio-0> at 0
[ 0.177540] ACPI: EC: EC description table is found, configuring boot EC
[ 0.180598] ACPI: BIOS _OSI(Linux) query ignored
[ 0.184325] ACPI: SSDT 7feb3c90 0022A (v01 APPLE Cpu0Ist 00003000 INTL 20050309)
[ 0.184736] ACPI: Dynamic OEM Table Load:
[ 0.184741] ACPI: SSDT (null) 0022A (v01 APPLE Cpu0Ist 00003000 INTL 20050309)
[ 0.184992] ACPI: SSDT 7feb2c10 002C3 (v01 APPLE Cpu0Cst 00003001 INTL 20050309)
[ 0.185382] ACPI: Dynamic OEM Table Load:
[ 0.185386] ACPI: SSDT (null) 002C3 (v01 APPLE Cpu0Cst 00003001 INTL 20050309)
[ 0.185828] ACPI: SSDT 7feb3f10 00087 (v01 APPLE Cpu1Ist 00003000 INTL 20050309)
[ 0.186228] ACPI: Dynamic OEM Table Load:
[ 0.186232] ACPI: SSDT (null) 00087 (v01 APPLE Cpu1Ist 00003000 INTL 20050309)
[ 0.186401] ACPI: SSDT 7feb2f10 00085 (v01 APPLE Cpu1Cst 00003000 INTL 20050309)
[ 0.186793] ACPI: Dynamic OEM Table Load:
[ 0.186797] ACPI: SSDT (null) 00085 (v01 APPLE Cpu1Cst 00003000 INTL 20050309)
[ 0.186866] ACPI: Interpreter enabled
[ 0.186871] ACPI: (supports S0 S3 S4 S5)
[ 0.186897] ACPI: Using IOAPIC for interrupt routing
[ 0.198408] ACPI: EC: GPE = 0x17, I/O: command/status = 0x66, data = 0x62
[ 0.198408] ACPI: No dock devices found.
[ 0.198408] PCI: Ignoring host bridge windows from ACPI; if necessary, use "pci=use_crs" and report a bug
[ 0.198408] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[ 0.200953] pci_root PNP0A08:00: host bridge window [io 0x0000-0x0cf7] (ignored)
[ 0.200957] pci_root PNP0A08:00: host bridge window [io 0x0d00-0xffff] (ignored)
[ 0.200960] pci_root PNP0A08:00: host bridge window [mem 0x000a0000-0x000bffff] (ignored)
[ 0.200965] pci_root PNP0A08:00: host bridge window [mem 0x80000000-0xfebfffff] (ignored)
[ 0.201061] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
[ 0.201065] pci 0000:00:01.0: PME# disabled
[ 0.201097] pci 0000:00:07.0: reg 10: [mem 0x90404000-0x90404fff]
[ 0.201192] pci 0000:00:1b.0: reg 10: [mem 0x90400000-0x90403fff 64bit]
[ 0.201255] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[ 0.201261] pci 0000:00:1b.0: PME# disabled
[ 0.201363] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[ 0.201369] pci 0000:00:1c.0: PME# disabled
[ 0.201475] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
[ 0.201481] pci 0000:00:1c.1: PME# disabled
[ 0.201585] pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
[ 0.201591] pci 0000:00:1c.2: PME# disabled
[ 0.201660] pci 0000:00:1d.0: reg 20: [io 0x40a0-0x40bf]
[ 0.201726] pci 0000:00:1d.1: reg 20: [io 0x4080-0x409f]
[ 0.201792] pci 0000:00:1d.2: reg 20: [io 0x4060-0x407f]
[ 0.201858] pci 0000:00:1d.3: reg 20: [io 0x4040-0x405f]
[ 0.201922] pci 0000:00:1d.7: reg 10: [mem 0x90405400-0x904057ff]
[ 0.201987] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
[ 0.201994] pci 0000:00:1d.7: PME# disabled
[ 0.202163] pci 0000:00:1f.0: quirk: [io 0x0400-0x047f] claimed by ICH6 ACPI/GPIO/TCO
[ 0.202168] pci 0000:00:1f.0: quirk: [io 0x0500-0x053f] claimed by ICH6 GPIO
[ 0.202174] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 1 PIO at 0680 (mask 000f)
[ 0.202179] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 2 PIO at 1640 (mask 000f)
[ 0.202185] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 3 PIO at 4700 (mask 0003)
[ 0.202190] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 4 PIO at 0300 (mask 001f)
[ 0.202245] pci 0000:00:1f.1: reg 10: [io 0x40e8-0x40ef]
[ 0.202253] pci 0000:00:1f.1: reg 14: [io 0x40fc-0x40ff]
[ 0.202262] pci 0000:00:1f.1: reg 18: [io 0x40e0-0x40e7]
[ 0.202271] pci 0000:00:1f.1: reg 1c: [io 0x40f8-0x40fb]
[ 0.202279] pci 0000:00:1f.1: reg 20: [io 0x40c0-0x40cf]
[ 0.202334] pci 0000:00:1f.2: reg 10: [io 0x40d8-0x40df]
[ 0.202343] pci 0000:00:1f.2: reg 14: [io 0x40f4-0x40f7]
[ 0.202352] pci 0000:00:1f.2: reg 18: [io 0x40d0-0x40d7]
[ 0.202360] pci 0000:00:1f.2: reg 1c: [io 0x40f0-0x40f3]
[ 0.202369] pci 0000:00:1f.2: reg 20: [io 0x4020-0x402f]
[ 0.202378] pci 0000:00:1f.2: reg 24: [mem 0x90405000-0x904053ff]
[ 0.202410] pci 0000:00:1f.2: PME# supported from D3hot
[ 0.202415] pci 0000:00:1f.2: PME# disabled
[ 0.202478] pci 0000:00:1f.3: reg 20: [io 0xefa0-0xefbf]
[ 0.202587] pci 0000:01:00.0: reg 10: [mem 0x80000000-0x87ffffff pref]
[ 0.202598] pci 0000:01:00.0: reg 14: [io 0x3000-0x30ff]
[ 0.202610] pci 0000:01:00.0: reg 18: [mem 0x90300000-0x9030ffff]
[ 0.202642] pci 0000:01:00.0: reg 30: [mem 0xfffe0000-0xffffffff pref]
[ 0.202689] pci 0000:01:00.0: supports D1 D2
[ 0.202715] pci 0000:01:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force'
[ 0.202729] pci 0000:00:01.0: PCI bridge to [bus 01-01]
[ 0.202734] pci 0000:00:01.0: bridge window [io 0x3000-0x3fff]
[ 0.202738] pci 0000:00:01.0: bridge window [mem 0x90300000-0x903fffff]
[ 0.202744] pci 0000:00:01.0: bridge window [mem 0x80000000-0x87ffffff 64bit pref]
[ 0.202860] pci 0000:02:00.0: reg 10: [mem 0x90200000-0x90203fff 64bit]
[ 0.202872] pci 0000:02:00.0: reg 18: [io 0x2000-0x20ff]
[ 0.202909] pci 0000:02:00.0: reg 30: [mem 0xfffe0000-0xffffffff pref]
[ 0.202965] pci 0000:02:00.0: supports D1 D2
[ 0.202968] pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.202975] pci 0000:02:00.0: PME# disabled
[ 0.202994] pci 0000:02:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force'
[ 0.203008] pci 0000:00:1c.0: PCI bridge to [bus 02-02]
[ 0.203014] pci 0000:00:1c.0: bridge window [io 0x2000-0x2fff]
[ 0.203020] pci 0000:00:1c.0: bridge window [mem 0x90200000-0x902fffff]
[ 0.203029] pci 0000:00:1c.0: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
[ 0.203140] pci 0000:03:00.0: reg 10: [mem 0x90100000-0x9010ffff 64bit]
[ 0.203266] pci 0000:03:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force'
[ 0.203279] pci 0000:00:1c.1: PCI bridge to [bus 03-03]
[ 0.203285] pci 0000:00:1c.1: bridge window [io 0xf000-0x0000] (disabled)
[ 0.203292] pci 0000:00:1c.1: bridge window [mem 0x90100000-0x901fffff]
[ 0.203301] pci 0000:00:1c.1: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
[ 0.203365] pci 0000:00:1c.2: PCI bridge to [bus 04-0b]
[ 0.203371] pci 0000:00:1c.2: bridge window [io 0x1000-0x1fff]
[ 0.203377] pci 0000:00:1c.2: bridge window [mem 0x8c100000-0x900fffff]
[ 0.203386] pci 0000:00:1c.2: bridge window [mem 0x88000000-0x8bffffff 64bit pref]
[ 0.203458] pci 0000:0c:03.0: reg 10: [mem 0x8c000000-0x8c000fff]
[ 0.203521] pci 0000:0c:03.0: supports D1 D2
[ 0.203524] pci 0000:0c:03.0: PME# supported from D0 D1 D2 D3hot
[ 0.203530] pci 0000:0c:03.0: PME# disabled
[ 0.203591] pci 0000:00:1e.0: PCI bridge to [bus 0c-0c] (subtractive decode)
[ 0.203597] pci 0000:00:1e.0: bridge window [io 0xf000-0x0000] (disabled)
[ 0.203604] pci 0000:00:1e.0: bridge window [mem 0x8c000000-0x8c0fffff]
[ 0.203613] pci 0000:00:1e.0: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
[ 0.203616] pci 0000:00:1e.0: bridge window [io 0x0000-0xffff] (subtractive decode)
[ 0.203620] pci 0000:00:1e.0: bridge window [mem 0x00000000-0xffffffff] (subtractive decode)
[ 0.203653] pci_bus 0000:00: on NUMA node 0
[ 0.203659] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 0.203909] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEGP._PRT]
[ 0.204017] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP01._PRT]
[ 0.204114] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP02._PRT]
[ 0.204209] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP03._PRT]
[ 0.204330] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCIB._PRT]
[ 0.213005] ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 5 6 7 10 12 14 15) *11
[ 0.213122] ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 5 6 7 *11 12 14 15)
[ 0.213234] ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 5 6 7 10 12 14 15) *11
[ 0.213348] ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 7 *11 12 14 15)
[ 0.213458] ACPI: PCI Interrupt Link [LNKE] (IRQs 1 3 4 5 6 7 10 12 14 15) *0, disabled.
[ 0.213571] ACPI: PCI Interrupt Link [LNKF] (IRQs 1 3 4 5 6 7 11 12 14 15) *0, disabled.
[ 0.213685] ACPI: PCI Interrupt Link [LNKG] (IRQs 1 3 4 5 6 7 10 12 14 15) *11
[ 0.213799] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 *11 12 14 15)
[ 0.213853] HEST: Table is not found!
[ 0.213968] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
[ 0.213974] vgaarb: loaded
[ 0.214174] SCSI subsystem initialized
[ 0.216280] libata version 3.00 loaded.
[ 0.216280] usbcore: registered new interface driver usbfs
[ 0.216280] usbcore: registered new interface driver hub
[ 0.216280] usbcore: registered new device driver usb
[ 0.216301] ACPI: WMI: Mapper loaded
[ 0.216304] PCI: Using ACPI for IRQ routing
[ 0.216307] PCI: pci_cache_line_size set to 64 bytes
[ 0.216419] reserve RAM buffer: 0000000000002000 - 000000000000ffff
[ 0.216423] reserve RAM buffer: 000000000009fc00 - 000000000009ffff
[ 0.216426] reserve RAM buffer: 000000007f0bd000 - 000000007fffffff
[ 0.216547] NetLabel: Initializing
[ 0.216549] NetLabel: domain hash size = 128
[ 0.216551] NetLabel: protocols = UNLABELED CIPSOv4
[ 0.216568] NetLabel: unlabeled traffic allowed by default
[ 0.216606] HPET: 3 timers in total, 0 timers will be used for per-cpu timer
[ 0.216614] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
[ 0.216621] hpet0: 3 comparators, 64-bit 14.318180 MHz counter
[ 0.224033] Switching to clocksource tsc
[ 0.236816] AppArmor: AppArmor Filesystem Enabled
[ 0.236836] pnp: PnP ACPI init
[ 0.236864] ACPI: bus type pnp registered
[ 0.238802] pnp 00:08: disabling [io 0x1640-0x164f] because it overlaps 0000:00:1c.2 BAR 13 [io 0x1000-0x1fff]
[ 0.245413] pnp: PnP ACPI: found 10 devices
[ 0.245417] ACPI: ACPI bus type pnp unregistered
[ 0.245422] PnPBIOS: Disabled by ACPI PNP
[ 0.245442] system 00:01: [mem 0xe0000000-0xefffffff] has been reserved
[ 0.245446] system 00:01: [mem 0xfed14000-0xfed17fff] has been reserved
[ 0.245450] system 00:01: [mem 0xfed18000-0xfed18fff] has been reserved
[ 0.245454] system 00:01: [mem 0xfed19000-0xfed19fff] has been reserved
[ 0.245458] system 00:01: [mem 0xfed1c000-0xfed1ffff] has been reserved
[ 0.245462] system 00:01: [mem 0xfed20000-0xfed8ffff] has been reserved
[ 0.245471] system 00:06: [mem 0xfed00000-0xfed003ff] has been reserved
[ 0.245590] system 00:08: [io 0x0680-0x06ef] has been reserved
[ 0.245617] system 00:08: [io 0x0800-0x080f] has been reserved
[ 0.245642] system 00:08: [io 0x0810-0x0817] has been reserved
[ 0.245645] system 00:08: [io 0x0400-0x047f] has been reserved
[ 0.245649] system 00:08: [io 0x0500-0x053f] has been reserved
[ 0.282082] pci 0000:01:00.0: no compatible bridge window for [mem 0xfffe0000-0xffffffff pref]
[ 0.282090] pci 0000:02:00.0: no compatible bridge window for [mem 0xfffe0000-0xffffffff pref]
[ 0.282155] pci 0000:00:1c.0: BAR 15: assigned [mem 0x90500000-0x906fffff pref]
[ 0.282159] pci 0000:00:1c.1: BAR 15: assigned [mem 0x90700000-0x908fffff 64bit pref]
[ 0.282164] pci 0000:00:1c.1: BAR 13: assigned [io 0x5000-0x5fff]
[ 0.282169] pci 0000:01:00.0: BAR 6: assigned [mem 0x90320000-0x9033ffff pref]
[ 0.282173] pci 0000:00:01.0: PCI bridge to [bus 01-01]
[ 0.282177] pci 0000:00:01.0: bridge window [io 0x3000-0x3fff]
[ 0.282182] pci 0000:00:01.0: bridge window [mem 0x90300000-0x903fffff]
[ 0.282187] pci 0000:00:01.0: bridge window [mem 0x80000000-0x87ffffff 64bit pref]
[ 0.282193] pci 0000:02:00.0: BAR 6: assigned [mem 0x90500000-0x9051ffff pref]
[ 0.282196] pci 0000:00:1c.0: PCI bridge to [bus 02-02]
[ 0.282201] pci 0000:00:1c.0: bridge window [io 0x2000-0x2fff]
[ 0.282208] pci 0000:00:1c.0: bridge window [mem 0x90200000-0x902fffff]
[ 0.282214] pci 0000:00:1c.0: bridge window [mem 0x90500000-0x906fffff pref]
[ 0.282223] pci 0000:00:1c.1: PCI bridge to [bus 03-03]
[ 0.282227] pci 0000:00:1c.1: bridge window [io 0x5000-0x5fff]
[ 0.282234] pci 0000:00:1c.1: bridge window [mem 0x90100000-0x901fffff]
[ 0.282240] pci 0000:00:1c.1: bridge window [mem 0x90700000-0x908fffff 64bit pref]
[ 0.282249] pci 0000:00:1c.2: PCI bridge to [bus 04-0b]
[ 0.282254] pci 0000:00:1c.2: bridge window [io 0x1000-0x1fff]
[ 0.282261] pci 0000:00:1c.2: bridge window [mem 0x8c100000-0x900fffff]
[ 0.282267] pci 0000:00:1c.2: bridge window [mem 0x88000000-0x8bffffff 64bit pref]
[ 0.282276] pci 0000:00:1e.0: PCI bridge to [bus 0c-0c]
[ 0.282279] pci 0000:00:1e.0: bridge window [io disabled]
[ 0.282286] pci 0000:00:1e.0: bridge window [mem 0x8c000000-0x8c0fffff]
[ 0.282292] pci 0000:00:1e.0: bridge window [mem pref disabled]
[ 0.282316] alloc irq_desc for 16 on node -1
[ 0.282318] alloc kstat_irqs on node -1
[ 0.282328] pci 0000:00:01.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 0.282333] pci 0000:00:01.0: setting latency timer to 64
[ 0.282344] alloc irq_desc for 17 on node -1
[ 0.282347] alloc kstat_irqs on node -1
[ 0.282351] pci 0000:00:1c.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[ 0.282357] pci 0000:00:1c.0: setting latency timer to 64
[ 0.282369] pci 0000:00:1c.1: PCI INT B -> GSI 16 (level, low) -> IRQ 16
[ 0.282375] pci 0000:00:1c.1: setting latency timer to 64
[ 0.282386] alloc irq_desc for 18 on node -1
[ 0.282388] alloc kstat_irqs on node -1
[ 0.282393] pci 0000:00:1c.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 0.282398] pci 0000:00:1c.2: setting latency timer to 64
[ 0.282502] pci 0000:00:1e.0: power state changed by ACPI to D0
[ 0.282562] pci 0000:00:1e.0: power state changed by ACPI to D0
[ 0.282570] pci 0000:00:1e.0: setting latency timer to 64
[ 0.282575] pci_bus 0000:00: resource 0 [io 0x0000-0xffff]
[ 0.282579] pci_bus 0000:00: resource 1 [mem 0x00000000-0xffffffff]
[ 0.282583] pci_bus 0000:01: resource 0 [io 0x3000-0x3fff]
[ 0.282586] pci_bus 0000:01: resource 1 [mem 0x90300000-0x903fffff]
[ 0.282589] pci_bus 0000:01: resource 2 [mem 0x80000000-0x87ffffff 64bit pref]
[ 0.282593] pci_bus 0000:02: resource 0 [io 0x2000-0x2fff]
[ 0.282596] pci_bus 0000:02: resource 1 [mem 0x90200000-0x902fffff]
[ 0.282599] pci_bus 0000:02: resource 2 [mem 0x90500000-0x906fffff pref]
[ 0.282602] pci_bus 0000:03: resource 0 [io 0x5000-0x5fff]
[ 0.282605] pci_bus 0000:03: resource 1 [mem 0x90100000-0x901fffff]
[ 0.282609] pci_bus 0000:03: resource 2 [mem 0x90700000-0x908fffff 64bit pref]
[ 0.282612] pci_bus 0000:04: resource 0 [io 0x1000-0x1fff]
[ 0.282615] pci_bus 0000:04: resource 1 [mem 0x8c100000-0x900fffff]
[ 0.282619] pci_bus 0000:04: resource 2 [mem 0x88000000-0x8bffffff 64bit pref]
[ 0.282622] pci_bus 0000:0c: resource 1 [mem 0x8c000000-0x8c0fffff]
[ 0.282625] pci_bus 0000:0c: resource 4 [io 0x0000-0xffff]
[ 0.282628] pci_bus 0000:0c: resource 5 [mem 0x00000000-0xffffffff]
[ 0.282678] NET: Registered protocol family 2
[ 0.282767] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 0.283061] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
[ 0.283778] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
[ 0.284128] TCP: Hash tables configured (established 131072 bind 65536)
[ 0.284132] TCP reno registered
[ 0.284139] UDP hash table entries: 512 (order: 2, 16384 bytes)
[ 0.284154] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
[ 0.284289] NET: Registered protocol family 1
[ 0.284542] pci 0000:01:00.0: Boot video device
[ 0.284556] PCI: CLS mismatch (256 != 64), using 64 bytes
[ 0.284804] cpufreq-nforce2: No nForce2 chipset.
[ 0.284846] Scanning for low memory corruption every 60 seconds
[ 0.285030] audit: initializing netlink socket (disabled)
[ 0.285041] type=2000 audit(1303066936.280:1): initialized
[ 0.298245] highmem bounce pool size: 64 pages
[ 0.298252] HugeTLB registered 4 MB page size, pre-allocated 0 pages
[ 0.300496] VFS: Disk quotas dquot_6.5.2
[ 0.300574] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 0.301302] fuse init (API version 7.14)
[ 0.301413] msgmni has been set to 1673
[ 0.302762] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[ 0.302767] io scheduler noop registered
[ 0.302769] io scheduler deadline registered
[ 0.302785] io scheduler cfq registered (default)
[ 0.302924] pcieport 0000:00:01.0: setting latency timer to 64
[ 0.302956] alloc irq_desc for 40 on node -1
[ 0.302959] alloc kstat_irqs on node -1
[ 0.302969] pcieport 0000:00:01.0: irq 40 for MSI/MSI-X
[ 0.303044] pcieport 0000:00:1c.0: setting latency timer to 64
[ 0.303092] alloc irq_desc for 41 on node -1
[ 0.303094] alloc kstat_irqs on node -1
[ 0.303104] pcieport 0000:00:1c.0: irq 41 for MSI/MSI-X
[ 0.303216] pcieport 0000:00:1c.1: setting latency timer to 64
[ 0.303264] alloc irq_desc for 42 on node -1
[ 0.303266] alloc kstat_irqs on node -1
[ 0.303276] pcieport 0000:00:1c.1: irq 42 for MSI/MSI-X
[ 0.303386] pcieport 0000:00:1c.2: setting latency timer to 64
[ 0.303435] alloc irq_desc for 43 on node -1
[ 0.303437] alloc kstat_irqs on node -1
[ 0.303447] pcieport 0000:00:1c.2: irq 43 for MSI/MSI-X
[ 0.303593] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 0.307627] pciehp 0000:00:1c.0:pcie04: HPC vendor_id 8086 device_id 27d0 ss_vid 0 ss_did 0
[ 0.307676] pciehp 0000:00:1c.0:pcie04: service driver pciehp loaded
[ 0.307697] pciehp 0000:00:1c.1:pcie04: HPC vendor_id 8086 device_id 27d2 ss_vid 0 ss_did 0
[ 0.307733] pciehp 0000:00:1c.1:pcie04: service driver pciehp loaded
[ 0.307751] pciehp 0000:00:1c.2:pcie04: HPC vendor_id 8086 device_id 27d4 ss_vid 0 ss_did 0
[ 0.307787] pciehp 0000:00:1c.2:pcie04: service driver pciehp loaded
[ 0.307797] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[ 0.307914] efifb: dmi detected MacBookPro1,1 - framebuffer at 80010000 (1440x900, stride 5888)
[ 0.307923] intel_idle: MWAIT substates: 0x22220
[ 0.307925] intel_idle: does not run on family 6 model 14
[ 0.308029] ACPI: AC Adapter [ADP1] (on-line)
[ 0.308124] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input0
[ 0.308165] ACPI: Lid Switch [LID0]
[ 0.308224] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input1
[ 0.308230] ACPI: Power Button [PWRB]
[ 0.308283] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input2
[ 0.308288] ACPI: Sleep Button [SLPB]
[ 0.308359] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3
[ 0.308364] ACPI: Power Button [PWRF]
[ 0.308619] ACPI: acpi_idle registered with cpuidle
[ 0.308840] Monitor-Mwait will be used to enter C-1 state
[ 0.308878] Monitor-Mwait will be used to enter C-2 state
[ 0.308909] Monitor-Mwait will be used to enter C-3 state
[ 0.308917] Marking TSC unstable due to TSC halts in idle
[ 0.309050] Switching to clocksource hpet
[ 0.321264] ERST: Table is not found!
[ 0.321567] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 0.323372] brd: module loaded
[ 0.324035] loop: module loaded
[ 0.324257] ata_piix 0000:00:1f.1: version 2.13
[ 0.324312] ata_piix 0000:00:1f.1: power state changed by ACPI to D0
[ 0.324351] ata_piix 0000:00:1f.1: power state changed by ACPI to D0
[ 0.324362] ata_piix 0000:00:1f.1: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[ 0.324413] ata_piix 0000:00:1f.1: setting latency timer to 64
[ 0.325162] scsi0 : ata_piix
[ 0.325254] isapnp: Scanning for PnP cards...
[ 0.330823] scsi1 : ata_piix
[ 0.380437] ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0x40c0 irq 14
[ 0.380442] ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0x40c8 irq 15
[ 0.380483] ata_piix 0000:00:1f.2: enabling device (0005 -> 0007)
[ 0.380493] alloc irq_desc for 19 on node -1
[ 0.380496] alloc kstat_irqs on node -1
[ 0.380504] ata_piix 0000:00:1f.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[ 0.380511] ata_piix 0000:00:1f.2: MAP [ P0 P2 -- -- ]
[ 0.521930] ACPI: Battery Slot [BAT0] (battery present)
[ 0.536111] ata_piix 0000:00:1f.2: setting latency timer to 64
[ 0.549811] scsi2 : ata_piix
[ 0.556225] scsi3 : ata_piix
[ 0.557397] ata3: SATA max UDMA/133 cmd 0x40d8 ctl 0x40f4 bmdma 0x4020 irq 19
[ 0.557401] ata4: SATA max UDMA/133 cmd 0x40d0 ctl 0x40f0 bmdma 0x4028 irq 19
[ 0.557825] Fixed MDIO Bus: probed
[ 0.557867] PPP generic driver version 2.4.2
[ 0.557943] tun: Universal TUN/TAP device driver, 1.6
[ 0.557945] tun: (C) 1999-2004 Max Krasnyansky <maxk at qualcomm.com>
[ 0.558051] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 0.558080] alloc irq_desc for 23 on node -1
[ 0.558082] alloc kstat_irqs on node -1
[ 0.558091] ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[ 0.558112] ehci_hcd 0000:00:1d.7: setting latency timer to 64
[ 0.558117] ehci_hcd 0000:00:1d.7: EHCI Host Controller
[ 0.558165] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1
[ 0.558190] ehci_hcd 0000:00:1d.7: using broken periodic workaround
[ 0.558203] ehci_hcd 0000:00:1d.7: debug port 1
[ 0.562097] ehci_hcd 0000:00:1d.7: cache line size of 64 is not supported
[ 0.562120] ehci_hcd 0000:00:1d.7: irq 23, io mem 0x90405400
[ 0.584098] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
[ 0.584300] hub 1-0:1.0: USB hub found
[ 0.584307] hub 1-0:1.0: 8 ports detected
[ 0.584418] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 0.584439] uhci_hcd: USB Universal Host Controller Interface driver
[ 0.584490] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[ 0.584501] uhci_hcd 0000:00:1d.0: setting latency timer to 64
[ 0.584506] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[ 0.584557] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
[ 0.584591] uhci_hcd 0000:00:1d.0: irq 23, io base 0x000040a0
[ 0.584731] hub 2-0:1.0: USB hub found
[ 0.584737] hub 2-0:1.0: 2 ports detected
[ 0.584814] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[ 0.584821] uhci_hcd 0000:00:1d.1: setting latency timer to 64
[ 0.584825] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[ 0.584865] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3
[ 0.584897] uhci_hcd 0000:00:1d.1: irq 19, io base 0x00004080
[ 0.585045] hub 3-0:1.0: USB hub found
[ 0.585050] hub 3-0:1.0: 2 ports detected
[ 0.585118] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 0.585126] uhci_hcd 0000:00:1d.2: setting latency timer to 64
[ 0.585130] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[ 0.585172] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4
[ 0.585217] uhci_hcd 0000:00:1d.2: irq 18, io base 0x00004060
[ 0.585360] hub 4-0:1.0: USB hub found
[ 0.585367] hub 4-0:1.0: 2 ports detected
[ 0.585437] uhci_hcd 0000:00:1d.3: PCI INT D -> GSI 16 (level, low) -> IRQ 16
[ 0.585444] uhci_hcd 0000:00:1d.3: setting latency timer to 64
[ 0.585448] uhci_hcd 0000:00:1d.3: UHCI Host Controller
[ 0.585495] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5
[ 0.585535] uhci_hcd 0000:00:1d.3: irq 16, io base 0x00004040
[ 0.585672] hub 5-0:1.0: USB hub found
[ 0.585676] hub 5-0:1.0: 2 ports detected
[ 0.585822] PNP: No PS/2 controller found. Probing ports directly.
[ 0.586713] i8042.c: No controller found.
[ 0.586778] mice: PS/2 mouse device common for all mice
[ 0.586981] rtc_cmos 00:09: RTC can wake from S4
[ 0.587029] rtc_cmos 00:09: rtc core: registered rtc_cmos as rtc0
[ 0.587065] rtc0: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
[ 0.587198] device-mapper: uevent: version 1.0.3
[ 0.596480] device-mapper: ioctl: 4.17.0-ioctl (2010-03-05) initialised: dm-devel at redhat.com
[ 0.680579] isapnp: No Plug & Play device found
[ 0.692242] Freeing initrd memory: 15596k freed
[ 0.692266] ata1.00: ATAPI: MATSHITADVD-R UJ-857, HAE4, max UDMA/66
[ 0.701406] device-mapper: multipath: version 1.1.1 loaded
[ 0.701416] device-mapper: multipath round-robin: version 1.0.0 loaded
[ 0.701690] EISA: Probing bus 0 at eisa.0
[ 0.701701] Cannot allocate resource for EISA slot 1
[ 0.701704] Cannot allocate resource for EISA slot 2
[ 0.701706] Cannot allocate resource for EISA slot 3
[ 0.701709] Cannot allocate resource for EISA slot 4
[ 0.701713] Cannot allocate resource for EISA slot 5
[ 0.701728] EISA: Detected 0 cards.
[ 0.702001] cpuidle: using governor ladder
[ 0.702135] cpuidle: using governor menu
[ 0.702523] TCP cubic registered
[ 0.702690] NET: Registered protocol family 10
[ 0.703143] lo: Disabled Privacy Extensions
[ 0.703430] NET: Registered protocol family 17
[ 0.706693] Using IPI No-Shortcut mode
[ 0.706819] PM: Resume from disk failed.
[ 0.706834] registered taskstats version 1
[ 0.707180] Magic number: 7:242:41
[ 0.707198] bdi 7:6: hash matches
[ 0.707314] rtc_cmos 00:09: setting system clock to 2011-04-17 19:02:17 UTC (1303066937)
[ 0.707318] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[ 0.707320] EDD information not available.
[ 0.709565] ata1.00: configured for UDMA/66
[ 0.711795] scsi 0:0:0:0: CD-ROM MATSHITA DVD-R UJ-857 HAE4 PQ: 0 ANSI: 5
[ 0.716360] sr0: scsi3-mmc drive: 24x/24x writer cd/rw xa/form2 cdda tray
[ 0.716366] Uniform CD-ROM driver Revision: 3.20
[ 0.716560] sr 0:0:0:0: Attached scsi CD-ROM sr0
[ 0.716680] sr 0:0:0:0: Attached scsi generic sg0 type 5
[ 0.764983] ata3.01: ATA-7: ST910021AS, 3.06, max UDMA/133
[ 0.764990] ata3.01: 195371568 sectors, multi 16: LBA48 NCQ (depth 0/32)
[ 0.781616] ata3.01: configured for UDMA/133
[ 0.781739] scsi 2:0:1:0: Direct-Access ATA ST910021AS 3.06 PQ: 0 ANSI: 5
[ 0.781882] sd 2:0:1:0: [sda] 195371568 512-byte logical blocks: (100 GB/93.1 GiB)
[ 0.781897] sd 2:0:1:0: Attached scsi generic sg1 type 0
[ 0.781979] sd 2:0:1:0: [sda] Write Protect is off
[ 0.781983] sd 2:0:1:0: [sda] Mode Sense: 00 3a 00 00
[ 0.782022] sd 2:0:1:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 0.782297] sda: sda1 sda2 sda3 sda4 sda5
[ 0.882427] sd 2:0:1:0: [sda] Attached SCSI disk
[ 0.882456] Freeing unused kernel memory: 684k freed
[ 0.882913] Write protecting the kernel text: 4952k
[ 0.882979] Write protecting the kernel read-only data: 1988k
[ 0.903289] udev[93]: starting version 163
[ 1.004428] usb 1-3: new high speed USB device using ehci_hcd and address 3
[ 1.019301] sky2: driver version 1.28
[ 1.019354] sky2 0000:02:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 1.019370] sky2 0000:02:00.0: setting latency timer to 64
[ 1.019405] sky2 0000:02:00.0: Yukon-2 EC chip revision 2
[ 1.019511] alloc irq_desc for 44 on node -1
[ 1.019514] alloc kstat_irqs on node -1
[ 1.019532] sky2 0000:02:00.0: irq 44 for MSI/MSI-X
[ 1.020744] sky2 0000:02:00.0: eth0: addr 00:16:cb:86:4a:ac
[ 1.040937] Linux agpgart interface v0.103
[ 1.105725] [drm] Initialized drm 1.1.0 20060810
[ 1.109835] firewire_ohci 0000:0c:03.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19
[ 1.138002] hub 1-3:1.0: USB hub found
[ 1.138312] hub 1-3:1.0: 4 ports detected
[ 1.162854] [drm] radeon defaulting to kernel modesetting.
[ 1.162858] [drm] radeon kernel modesetting enabled.
[ 1.162927] radeon 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 1.162933] radeon 0000:01:00.0: setting latency timer to 64
[ 1.164778] [drm] initializing kernel modesetting (RV530 0x1002:0x71C5).
[ 1.164952] [drm] register mmio base: 0x90300000
[ 1.164955] [drm] register mmio size: 65536
[ 1.165117] ATOM BIOS: M56P
[ 1.165150] [drm] Generation 2 PCI interface, using max accessible memory
[ 1.165156] radeon 0000:01:00.0: VRAM: 128M 0x00000000 - 0x07FFFFFF (128M used)
[ 1.165160] radeon 0000:01:00.0: GTT: 512M 0x08000000 - 0x27FFFFFF
[ 1.165243] alloc irq_desc for 45 on node -1
[ 1.165246] alloc kstat_irqs on node -1
[ 1.165258] radeon 0000:01:00.0: irq 45 for MSI/MSI-X
[ 1.165265] radeon 0000:01:00.0: radeon: using MSI.
[ 1.165293] [drm] radeon: irq initialized.
[ 1.166084] [drm] Detected VRAM RAM=128M, BAR=128M
[ 1.166088] [drm] RAM width 128bits DDR
[ 1.166220] [TTM] Zone kernel: Available graphics memory: 436608 kiB.
[ 1.166223] [TTM] Zone highmem: Available graphics memory: 1022718 kiB.
[ 1.166226] [TTM] Initializing pool allocator.
[ 1.166252] [drm] radeon: 128M of VRAM memory ready
[ 1.166254] [drm] radeon: 512M of GTT memory ready.
[ 1.166281] [drm] GART: num cpu pages 131072, num gpu pages 131072
[ 1.167992] [drm] radeon: 1 quad pipes, 2 z pipes initialized.
[ 1.169480] [drm] PCIE GART of 512M enabled (table at 0x00040000).
[ 1.169539] [drm] Loading R500 Microcode
[ 1.171350] [drm] radeon: ring at 0x0000000008000000
[ 1.171395] [drm] ring test succeeded in 12 usecs
[ 1.171614] [drm] radeon: ib pool ready.
[ 1.171752] [drm] ib test succeeded in 0 usecs
[ 1.171763] failed to evaluate ATIF got AE_BAD_PARAMETER
[ 1.171766] radeon 0000:01:00.0: Error during ACPI methods call
[ 1.171801] [drm] Default TV standard: NTSC
[ 1.171888] [drm] Default TV standard: NTSC
[ 1.171977] [drm] Radeon Display Connectors
[ 1.171979] [drm] Connector 0:
[ 1.171981] [drm] LVDS
[ 1.171985] [drm] DDC: 0x7e60 0x7e60 0x7e64 0x7e64 0x7e68 0x7e68 0x7e6c 0x7e6c
[ 1.171987] [drm] Encoders:
[ 1.171990] [drm] LCD1: INTERNAL_LVTM1
[ 1.171992] [drm] Connector 1:
[ 1.171994] [drm] S-video
[ 1.171995] [drm] Encoders:
[ 1.171997] [drm] TV1: INTERNAL_KLDSCP_DAC2
[ 1.172000] [drm] Connector 2:
[ 1.172001] [drm] DVI-I
[ 1.172003] [drm] HPD1
[ 1.172006] [drm] DDC: 0x7e40 0x7e40 0x7e44 0x7e44 0x7e48 0x7e48 0x7e4c 0x7e4c
[ 1.172009] [drm] Encoders:
[ 1.172011] [drm] CRT2: INTERNAL_KLDSCP_DAC2
[ 1.172013] [drm] DFP1: INTERNAL_KLDSCP_TMDS1
[ 1.244027] firewire_ohci: Added fw-ohci device 0000:0c:03.0, OHCI v1.0, 8 IR + 8 IT contexts, quirks 0x0
[ 1.248040] usb 1-4: new high speed USB device using ehci_hcd and address 4
[ 1.278721] [drm] Possible lm63 thermal controller at 0x4c
[ 1.278791] [drm] radeon: power management initialized
[ 1.494003] [drm] fb mappable at 0x800C0000
[ 1.494006] [drm] vram apper at 0x80000000
[ 1.494009] [drm] size 7258112
[ 1.494011] [drm] fb depth is 24
[ 1.494013] [drm] pitch is 6912
[ 1.523727] Console: switching to colour frame buffer device 180x56
[ 1.530065] fb0: radeondrmfb frame buffer device
[ 1.530068] drm: registered panic notifier
[ 1.530072] Slow work thread pool: Starting up
[ 1.530225] Slow work thread pool: Ready
[ 1.530232] [drm] Initialized radeon 2.5.0 20080528 for 0000:01:00.0 on minor 0
[ 1.736190] firewire_core: created device fw0: GUID 0016cbfffe5693cc, S400
[ 1.844033] usb 2-2: new full speed USB device using uhci_hcd and address 2
[ 2.060542] usbcore: registered new interface driver hiddev
[ 2.060805] usbcore: registered new interface driver usbhid
[ 2.060807] usbhid: USB HID core driver
[ 2.068786] input: Apple Computer Apple Internal Keyboard / Trackpad as /devices/pci0000:00/0000:00:1d.0/usb2/2-2/2-2:1.0/input/input4
[ 2.068975] apple 0003:05AC:0218.0001: input,hidraw0: USB HID v1.11 Keyboard [Apple Computer Apple Internal Keyboard / Trackpad] on usb-0000:00:1d.0-2/input0
[ 2.071792] input: Apple Computer Apple Internal Keyboard / Trackpad as /devices/pci0000:00/0000:00:1d.0/usb2/2-2/2-2:1.2/input/input5
[ 2.071948] apple 0003:05AC:0218.0002: input,hidraw1: USB HID v1.11 Device [Apple Computer Apple Internal Keyboard / Trackpad] on usb-0000:00:1d.0-2/input2
[ 2.284077] usb 4-2: new full speed USB device using uhci_hcd and address 2
[ 2.470492] generic-usb 0003:05AC:8240.0003: hiddev96,hidraw2: USB HID v1.11 Device [Apple Computer, Inc. IR Receiver] on usb-0000:00:1d.2-2/input0
[ 2.708059] usb 5-1: new full speed USB device using uhci_hcd and address 2
[ 2.909766] input: HID 05ac:1000 as /devices/pci0000:00/0000:00:1d.3/usb5/5-1/5-1:1.0/input/input6
[ 2.909860] generic-usb 0003:05AC:1000.0004: input,hidraw3: USB HID v1.11 Keyboard [HID 05ac:1000] on usb-0000:00:1d.3-1/input0
[ 2.949850] input: HID 05ac:1000 as /devices/pci0000:00/0000:00:1d.3/usb5/5-1/5-1:1.1/input/input7
[ 2.949968] generic-usb 0003:05AC:1000.0005: input,hidraw4: USB HID v1.11 Mouse [HID 05ac:1000] on usb-0000:00:1d.3-1/input1
[ 3.020390] usb 1-3.1: new low speed USB device using ehci_hcd and address 7
[ 3.132183] input: Logitech Logitech USB Keyboard as /devices/pci0000:00/0000:00:1d.7/usb1/1-3/1-3.1/1-3.1:1.0/input/input8
[ 3.132295] generic-usb 0003:046D:C308.0006: input,hidraw5: USB HID v1.10 Keyboard [Logitech Logitech USB Keyboard] on usb-0000:00:1d.7-3.1/input0
[ 3.146892] input: Logitech Logitech USB Keyboard as /devices/pci0000:00/0000:00:1d.7/usb1/1-3/1-3.1/1-3.1:1.1/input/input9
[ 3.147023] generic-usb 0003:046D:C308.0007: input,hidraw6: USB HID v1.10 Mouse [Logitech Logitech USB Keyboard] on usb-0000:00:1d.7-3.1/input1
[ 3.216387] usb 1-3.2: new low speed USB device using ehci_hcd and address 8
[ 3.318093] input: Logitech USB-PS/2 Optical Mouse as /devices/pci0000:00/0000:00:1d.7/usb1/1-3/1-3.2/1-3.2:1.0/input/input10
[ 3.318214] generic-usb 0003:046D:C00E.0008: input,hidraw7: USB HID v1.10 Mouse [Logitech USB-PS/2 Optical Mouse] on usb-0000:00:1d.7-3.2/input0
[ 3.388408] usb 1-3.3: new full speed USB device using ehci_hcd and address 9
[ 3.552420] usb 1-3.4: new high speed USB device using ehci_hcd and address 10
[ 3.694444] Initializing USB Mass Storage driver...
[ 3.694589] usb-storage 1-3.4:1.0: Quirks match for vid 0bc2 pid 3010: 8000
[ 3.694655] scsi4 : usb-storage 1-3.4:1.0
[ 3.694759] usbcore: registered new interface driver usb-storage
[ 3.694762] USB Mass Storage support registered.
[ 4.697625] scsi 4:0:0:0: Direct-Access Seagate FreeAgent Pro 400A PQ: 0 ANSI: 4
[ 4.698628] sd 4:0:0:0: Attached scsi generic sg2 type 0
[ 4.702708] sd 4:0:0:0: [sdb] 976773168 512-byte logical blocks: (500 GB/465 GiB)
[ 4.705327] sd 4:0:0:0: [sdb] Write Protect is off
[ 4.705334] sd 4:0:0:0: [sdb] Mode Sense: 1c 00 00 00
[ 4.705340] sd 4:0:0:0: [sdb] Assuming drive cache: write through
[ 4.711951] sd 4:0:0:0: [sdb] Assuming drive cache: write through
[ 4.711960] sdb: sdb1
[ 4.721081] sd 4:0:0:0: [sdb] Assuming drive cache: write through
[ 4.721089] sd 4:0:0:0: [sdb] Attached SCSI disk
[ 7.282358] EXT4-fs (sda4): mounted filesystem with ordered data mode. Opts: (null)
[ 11.950803] udev[464]: starting version 163
[ 12.217029] EXT4-fs (sda4): re-mounted. Opts: errors=remount-ro
[ 12.794928] usb 5-1: usbfs: USBDEVFS_CONTROL failed cmd hid2hci rqt 64 rq 0 len 0 ret -84
[ 12.800086] usb 5-1: USB disconnect, address 2
[ 13.483005] appletouch: Geyser mode initialized.
[ 13.483285] input: appletouch as /devices/pci0000:00/0000:00:1d.0/usb2/2-2/2-2:1.1/input/input11
[ 13.483693] usbcore: registered new interface driver appletouch
[ 13.537268] usb 5-1: new full speed USB device using uhci_hcd and address 3
[ 14.095071] applesmc: Apple MacBook Pro detected:
[ 14.095076] applesmc: - Model with accelerometer
[ 14.095078] applesmc: - Model with light sensors and backlight
[ 14.095081] applesmc: - Model with 12 temperature sensors
[ 14.149756] applesmc: device successfully initialized (0xe0, 0x00).
[ 14.149760] applesmc: device successfully initialized.
[ 14.150570] applesmc: 2 fans found.
[ 14.177301] input: applesmc as /devices/platform/applesmc.768/input/input12
[ 14.209717] Registered led device: smc::kbd_backlight
[ 14.209745] applesmc: driver successfully loaded.
[ 14.790107] Bluetooth: Core ver 2.15
[ 14.790407] NET: Registered protocol family 31
[ 14.790410] Bluetooth: HCI device and connection manager initialized
[ 14.790414] Bluetooth: HCI socket layer initialized
[ 14.814171] cfg80211: Calling CRDA to update world regulatory domain
[ 14.865917] tpm_inf_pnp 00:03: Found TPM with ID IFX0101
[ 14.865975] tpm_inf_pnp 00:03: TPM found: config base 0x4e, data base 0x4700, chip version 0x000b, vendor id 0x15d1 (Infineon), product id 0x000b (SLB 9635 TT 1.2)
[ 15.163186] Unable to load isight firmware
[ 15.163230] usbcore: registered new interface driver isight_firmware
[ 15.229433] Bluetooth: Generic Bluetooth USB driver ver 0.6
[ 15.229660] usbcore: registered new interface driver btusb
[ 15.302312] intel_rng: FWH not detected
[ 15.427459] leds_ss4200: no LED devices found
[ 15.634609] lp: driver loaded but no devices found
[ 16.277876] ath5k 0000:03:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[ 16.277891] ath5k 0000:03:00.0: setting latency timer to 64
[ 16.277934] ath5k 0000:03:00.0: registered as 'phy0'
[ 16.285792] type=1400 audit(1303066953.076:2): apparmor="STATUS" operation="profile_load" name="/sbin/dhclient3" pid=615 comm="apparmor_parser"
[ 16.286510] type=1400 audit(1303066953.076:3): apparmor="STATUS" operation="profile_load" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=615 comm="apparmor_parser"
[ 16.286903] type=1400 audit(1303066953.076:4): apparmor="STATUS" operation="profile_load" name="/usr/lib/connman/scripts/dhclient-script" pid=615 comm="apparmor_parser"
[ 16.837724] ath: EEPROM regdomain: 0x65
[ 16.837729] ath: EEPROM indicates we should expect a direct regpair map
[ 16.837734] ath: Country alpha2 being used: 00
[ 16.837736] ath: Regpair used: 0x65
[ 16.875090] cfg80211: World regulatory domain updated:
[ 16.875094] (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[ 16.875098] (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 16.875102] (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 16.875105] (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 16.875109] (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 16.875112] (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 16.909431] alloc irq_desc for 22 on node -1
[ 16.909435] alloc kstat_irqs on node -1
[ 16.909444] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
[ 16.909495] alloc irq_desc for 46 on node -1
[ 16.909498] alloc kstat_irqs on node -1
[ 16.909511] HDA Intel 0000:00:1b.0: irq 46 for MSI/MSI-X
[ 16.909548] HDA Intel 0000:00:1b.0: setting latency timer to 64
[ 17.247131] hda_codec: STAC922x, Apple subsys_id=106b0200
[ 17.268642] input: HDA Intel Line In at Ext Rear Jack as /devices/pci0000:00/0000:00:1b.0/sound/card0/input13
[ 17.268762] input: HDA Intel HP Out at Ext Rear Jack as /devices/pci0000:00/0000:00:1b.0/sound/card0/input14
[ 17.272651] phy0: Selected rate control algorithm 'minstrel'
[ 17.273386] ath5k phy0: Atheros AR5414 chip found (MAC: 0xa3, PHY: 0x61)
[ 18.006777] usblp0: USB Bidirectional printer dev 9 if 0 alt 1 proto 2 vid 0x03F0 pid 0x0D17
[ 18.006821] usbcore: registered new interface driver usblp
[ 21.619455] type=1400 audit(1303066958.408:5): apparmor="STATUS" operation="profile_replace" name="/sbin/dhclient3" pid=1172 comm="apparmor_parser"
[ 21.620328] type=1400 audit(1303066958.412:6): apparmor="STATUS" operation="profile_replace" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=1172 comm="apparmor_parser"
[ 21.620725] type=1400 audit(1303066958.412:7): apparmor="STATUS" operation="profile_replace" name="/usr/lib/connman/scripts/dhclient-script" pid=1172 comm="apparmor_parser"
[ 21.935841] padlock: VIA PadLock not detected.
[ 21.980487] type=1400 audit(1303066958.772:8): apparmor="STATUS" operation="profile_load" name="/usr/share/gdm/guest-session/Xsession" pid=1171 comm="apparmor_parser"
[ 22.901162] padlock: VIA PadLock Hash Engine not detected.
[ 23.433868] ppdev: user-space parallel port driver
[ 23.515195] type=1400 audit(1303066960.304:9): apparmor="STATUS" operation="profile_load" name="/usr/lib/cups/backend/cups-pdf" pid=1195 comm="apparmor_parser"
[ 23.516136] type=1400 audit(1303066960.308:10): apparmor="STATUS" operation="profile_load" name="/usr/sbin/cupsd" pid=1195 comm="apparmor_parser"
[ 23.780204] type=1400 audit(1303066960.572:11): apparmor="STATUS" operation="profile_load" name="/usr/sbin/dhcpd3" pid=1292 comm="apparmor_parser"
[ 23.946820] type=1400 audit(1303066960.736:12): apparmor="STATUS" operation="profile_load" name="/usr/sbin/tcpdump" pid=1299 comm="apparmor_parser"
[ 24.066940] type=1400 audit(1303066960.856:13): apparmor="STATUS" operation="profile_load" name="/usr/bin/evince" pid=1173 comm="apparmor_parser"
[ 24.076100] type=1400 audit(1303066960.868:14): apparmor="STATUS" operation="profile_load" name="/usr/bin/evince-previewer" pid=1173 comm="apparmor_parser"
[ 26.225175] sky2 0000:02:00.0: eth0: enabling interface
[ 26.225401] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 26.243360] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 26.915353] Adding 3416060k swap on /dev/mapper/cryptswap1. Priority:-1 extents:1 across:3416060k
[ 29.048653] usb 1-3.3: usbfs: interface 0 claimed by usblp while 'usb' sets config #1
[ 49.768441] EXT4-fs (sda4): re-mounted. Opts: errors=remount-ro,commit=0
[ 51.116829] Bluetooth: L2CAP ver 2.14
[ 51.116833] Bluetooth: L2CAP socket layer initialized
[ 51.268420] input: Mouseemu virtual keyboard as /devices/virtual/input/input15
[ 51.268649] input: Mouseemu virtual mouse as /devices/virtual/input/input16
[ 51.269751] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 51.269755] Bluetooth: BNEP filters: protocol multicast
[ 51.335894] Bluetooth: SCO (Voice Link) ver 0.6
[ 51.335898] Bluetooth: SCO socket layer initialized
[ 51.778543] Bluetooth: RFCOMM TTY layer initialized
[ 51.778550] Bluetooth: RFCOMM socket layer initialized
[ 51.778553] Bluetooth: RFCOMM ver 1.11
[ 99.513569] Bluetooth: HIDP (Human Interface Emulation) ver 1.2
[ 111.315527] wlan0: authenticate with 00:11:95:3d:6b:4b (try 1)
[ 111.320393] wlan0: authenticated
[ 111.320420] wlan0: associate with 00:11:95:3d:6b:4b (try 1)
[ 111.323371] wlan0: RX AssocResp from 00:11:95:3d:6b:4b (capab=0x431 status=0 aid=14)
[ 111.323428] wlan0: associated
[ 111.324189] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[ 118.686353] EXT3-fs: barriers not enabled
[ 118.694831] kjournald starting. Commit interval 5 seconds
[ 118.695386] EXT3-fs (sdb1): warning: checktime reached, running e2fsck is recommended
[ 118.696467] EXT3-fs (sdb1): using internal journal
[ 118.696478] EXT3-fs (sdb1): mounted filesystem with ordered data mode
[ 122.032028] wlan0: no IPv6 routers present
[ 3058.827497] lo: Disabled Privacy Extensions
[ 6246.670194] lo: Disabled Privacy Extensions
[ 7310.865625] CE: hpet increased min_delta_ns to 7500 nsec
[ 7310.866467] CE: hpet increased min_delta_ns to 11250 nsec
[ 7310.866954] CE: hpet increased min_delta_ns to 16875 nsec
[ 7310.867296] CE: hpet increased min_delta_ns to 25312 nsec
[ 7310.867646] CE: hpet increased min_delta_ns to 37968 nsec
[ 7316.969370] CE: hpet increased min_delta_ns to 56952 nsec
[ 7319.373765] CE: hpet increased min_delta_ns to 85428 nsec
[23344.407880] CE: hpet increased min_delta_ns to 128142 nsec
[23344.489901] CE: hpet increased min_delta_ns to 192213 nsec
[23344.538389] CE: hpet increased min_delta_ns to 288319 nsec
[23409.941816] CE: hpet increased min_delta_ns to 432478 nsec
[23812.309747] hrtimer: interrupt took 1208667 ns
[44025.290518] wlan0: deauthenticated from 00:11:95:3d:6b:4b (Reason: 3)
[44025.301352] cfg80211: All devices are disconnected, going to restore regulatory settings
[44025.301364] cfg80211: Restoring regulatory settings
[44025.301372] cfg80211: Calling CRDA to update world regulatory domain
[44025.487428] cfg80211: World regulatory domain updated:
[44025.487438] (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[44025.487445] (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[44025.487452] (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[44025.487458] (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[44025.487464] (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[44025.487471] (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[44028.015199] wlan0: authenticate with 00:11:95:3d:6b:4b (try 1)
[44028.016746] wlan0: authenticated
[44028.016768] wlan0: associate with 00:11:95:3d:6b:4b (try 1)
[44028.018890] wlan0: RX AssocResp from 00:11:95:3d:6b:4b (capab=0x431 status=0 aid=14)
[44028.018898] wlan0: associated
[57702.411273] wlan0: deauthenticated from 00:11:95:3d:6b:4b (Reason: 3)
[57702.421517] cfg80211: All devices are disconnected, going to restore regulatory settings
[57702.421530] cfg80211: Restoring regulatory settings
[57702.421537] cfg80211: Calling CRDA to update world regulatory domain
[57702.429063] cfg80211: World regulatory domain updated:
[57702.429070] (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[57702.429077] (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[57702.429084] (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[57702.429090] (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[57702.429097] (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[57702.429103] (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[57705.143641] wlan0: authenticate with 00:11:95:3d:6b:4b (try 1)
[57705.145100] wlan0: authenticated
[57705.145125] wlan0: associate with 00:11:95:3d:6b:4b (try 1)
[57705.147091] wlan0: RX AssocResp from 00:11:95:3d:6b:4b (capab=0x431 status=0 aid=14)
[57705.147097] wlan0: associated
[66693.098131] lo: Disabled Privacy Extensions
^ permalink raw reply [flat|nested] 3+ messages in thread
end of thread, other threads:[~2011-04-18 14:11 UTC | newest]
Thread overview: 3+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2011-04-12 22:05 [ltt-dev] Time in trace passes too slowly Francis Giraldeau
2011-04-13 15:38 ` Mathieu Desnoyers
[not found] ` <BLU0-SMTP705696D47DFABC88D7F84596AA0@phx.gbl>
2011-04-18 14:11 ` Francis Giraldeau
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox