* [ltt-dev] [UST PATCH] Set the exit status of ustctl main function v3
@ 2010-09-09 16:48 David Goulet
2010-09-09 17:01 ` Mathieu Desnoyers
0 siblings, 1 reply; 2+ messages in thread
From: David Goulet @ 2010-09-09 16:48 UTC (permalink / raw)
Each possible command checks the return value and, on error,
print on stderr and set the retval. This makes ustctl return
an EXIT_FAILURE on any command that fails.
Signed-off-by: David Goulet <david.goulet at polymtl.ca>
---
ustctl/ustctl.c | 56 +++++++++++++++++++++++++++++++++++++++++++-----------
1 files changed, 44 insertions(+), 12 deletions(-)
diff --git a/ustctl/ustctl.c b/ustctl/ustctl.c
index d290975..35bea7a 100644
--- a/ustctl/ustctl.c
+++ b/ustctl/ustctl.c
@@ -170,6 +170,7 @@ int main(int argc, char *argv[])
{
pid_t *pidit;
int result;
+ int retval = EXIT_SUCCESS;
char *tmp;
struct ust_opts opts;
@@ -222,6 +223,7 @@ int main(int argc, char *argv[])
result = ustcmd_create_trace(*pidit);
if (result) {
ERR("error while trying to create trace with PID %u\n", (unsigned int) *pidit);
+ retval = EXIT_FAILURE;
break;
}
break;
@@ -230,6 +232,7 @@ int main(int argc, char *argv[])
result = ustcmd_start_trace(*pidit);
if (result) {
ERR("error while trying to for trace with PID %u\n", (unsigned int) *pidit);
+ retval = EXIT_FAILURE;
break;
}
break;
@@ -238,6 +241,7 @@ int main(int argc, char *argv[])
result = ustcmd_stop_trace(*pidit);
if (result) {
ERR("error while trying to stop trace for PID %u\n", (unsigned int) *pidit);
+ retval = EXIT_FAILURE;
break;
}
break;
@@ -246,6 +250,7 @@ int main(int argc, char *argv[])
result = ustcmd_destroy_trace(*pidit);
if (result) {
ERR("error while trying to destroy trace with PID %u\n", (unsigned int) *pidit);
+ retval = EXIT_FAILURE;
break;
}
break;
@@ -253,9 +258,8 @@ int main(int argc, char *argv[])
case LIST_MARKERS:
cmsf = NULL;
if (ustcmd_get_cmsf(&cmsf, *pidit)) {
- fprintf(stderr,
- "error while trying to list markers for"
- " PID %u\n", (unsigned int) *pidit);
+ ERR("error while trying to list markers for PID %u\n", (unsigned int) *pidit);
+ retval = EXIT_FAILURE;
break;
}
unsigned int i = 0;
@@ -273,26 +277,49 @@ int main(int argc, char *argv[])
break;
case ENABLE_MARKER:
- if(opts.regex)
- ustcmd_set_marker_state(opts.regex, 1, *pidit);
+ if (opts.regex) {
+ if (ustcmd_set_marker_state(opts.regex, 1, *pidit)) {
+ ERR("error while trying to enable marker %s with PID %u\n",
+ opts.regex, (unsigned int) *pidit);
+ retval = EXIT_FAILURE;
+ }
+ }
break;
case DISABLE_MARKER:
- if(opts.regex)
- ustcmd_set_marker_state(opts.regex, 0, *pidit);
+ if (opts.regex) {
+ if (ustcmd_set_marker_state(opts.regex, 0, *pidit)) {
+ ERR("error while trying to disable marker %s with PID %u\n",
+ opts.regex, (unsigned int) *pidit);
+ retval = EXIT_FAILURE;
+ }
+ }
break;
case SET_SUBBUF_SIZE:
- ustcmd_set_subbuf_size(opts.regex, *pidit);
+ if (opts.regex) {
+ if (ustcmd_set_subbuf_size(opts.regex, *pidit)) {
+ ERR("error while trying to set the size of subbuffers with PID %u\n",
+ (unsigned int) *pidit);
+ retval = EXIT_FAILURE;
+ }
+ }
break;
case SET_SUBBUF_NUM:
- ustcmd_set_subbuf_num(opts.regex, *pidit);
+ if (opts.regex) {
+ if (ustcmd_set_subbuf_num(opts.regex, *pidit)) {
+ ERR("error while trying to set the number of subbuffers with PID %u\n",
+ (unsigned int) *pidit);
+ retval = EXIT_FAILURE;
+ }
+ }
break;
case GET_SUBBUF_SIZE:
result = ustcmd_get_subbuf_size(opts.regex, *pidit);
if (result == -1) {
ERR("error while trying to get_subuf_size with PID %u\n", (unsigned int) *pidit);
+ retval = EXIT_FAILURE;
break;
}
@@ -303,6 +330,7 @@ int main(int argc, char *argv[])
result = ustcmd_get_subbuf_num(opts.regex, *pidit);
if (result == -1) {
ERR("error while trying to get_subuf_num with PID %u\n", (unsigned int) *pidit);
+ retval = EXIT_FAILURE;
break;
}
@@ -313,7 +341,7 @@ int main(int argc, char *argv[])
result = ustcmd_alloc_trace(*pidit);
if (result) {
ERR("error while trying to alloc trace with PID %u\n", (unsigned int) *pidit);
- break;
+ retval = EXIT_FAILURE;
}
break;
@@ -321,6 +349,7 @@ int main(int argc, char *argv[])
result = ustcmd_get_sock_path(&tmp, *pidit);
if (result) {
ERR("error while trying to get sock path for PID %u\n", (unsigned int) *pidit);
+ retval = EXIT_FAILURE;
break;
}
printf("the socket path is %s\n", tmp);
@@ -331,6 +360,7 @@ int main(int argc, char *argv[])
result = ustcmd_set_sock_path(opts.regex, *pidit);
if (result) {
ERR("error while trying to set sock path for PID %u\n", (unsigned int) *pidit);
+ retval = EXIT_FAILURE;
}
break;
@@ -338,12 +368,14 @@ int main(int argc, char *argv[])
result = ustcmd_force_switch(*pidit);
if (result) {
ERR("error while trying to force switch for PID %u\n", (unsigned int) *pidit);
+ retval = EXIT_FAILURE;
}
break;
default:
ERR("unknown command\n");
- break;
+ retval = EXIT_FAILURE;
+ break;
}
pidit++;
@@ -356,6 +388,6 @@ int main(int argc, char *argv[])
free(opts.regex);
}
- return 0;
+ return retval;
}
--
1.7.2.3
^ permalink raw reply [flat|nested] 2+ messages in thread* [ltt-dev] [UST PATCH] Set the exit status of ustctl main function v3
2010-09-09 16:48 [ltt-dev] [UST PATCH] Set the exit status of ustctl main function v3 David Goulet
@ 2010-09-09 17:01 ` Mathieu Desnoyers
0 siblings, 0 replies; 2+ messages in thread
From: Mathieu Desnoyers @ 2010-09-09 17:01 UTC (permalink / raw)
* David Goulet (david.goulet at polymtl.ca) wrote:
> Each possible command checks the return value and, on error,
> print on stderr and set the retval. This makes ustctl return
> an EXIT_FAILURE on any command that fails.
>
> Signed-off-by: David Goulet <david.goulet at polymtl.ca>
Acked-by: Mathieu Desnoyers <mathieu.desnoyers at efficios.com>
> ---
> ustctl/ustctl.c | 56 +++++++++++++++++++++++++++++++++++++++++++-----------
> 1 files changed, 44 insertions(+), 12 deletions(-)
>
> diff --git a/ustctl/ustctl.c b/ustctl/ustctl.c
> index d290975..35bea7a 100644
> --- a/ustctl/ustctl.c
> +++ b/ustctl/ustctl.c
> @@ -170,6 +170,7 @@ int main(int argc, char *argv[])
> {
> pid_t *pidit;
> int result;
> + int retval = EXIT_SUCCESS;
> char *tmp;
> struct ust_opts opts;
>
> @@ -222,6 +223,7 @@ int main(int argc, char *argv[])
> result = ustcmd_create_trace(*pidit);
> if (result) {
> ERR("error while trying to create trace with PID %u\n", (unsigned int) *pidit);
> + retval = EXIT_FAILURE;
> break;
> }
> break;
> @@ -230,6 +232,7 @@ int main(int argc, char *argv[])
> result = ustcmd_start_trace(*pidit);
> if (result) {
> ERR("error while trying to for trace with PID %u\n", (unsigned int) *pidit);
> + retval = EXIT_FAILURE;
> break;
> }
> break;
> @@ -238,6 +241,7 @@ int main(int argc, char *argv[])
> result = ustcmd_stop_trace(*pidit);
> if (result) {
> ERR("error while trying to stop trace for PID %u\n", (unsigned int) *pidit);
> + retval = EXIT_FAILURE;
> break;
> }
> break;
> @@ -246,6 +250,7 @@ int main(int argc, char *argv[])
> result = ustcmd_destroy_trace(*pidit);
> if (result) {
> ERR("error while trying to destroy trace with PID %u\n", (unsigned int) *pidit);
> + retval = EXIT_FAILURE;
> break;
> }
> break;
> @@ -253,9 +258,8 @@ int main(int argc, char *argv[])
> case LIST_MARKERS:
> cmsf = NULL;
> if (ustcmd_get_cmsf(&cmsf, *pidit)) {
> - fprintf(stderr,
> - "error while trying to list markers for"
> - " PID %u\n", (unsigned int) *pidit);
> + ERR("error while trying to list markers for PID %u\n", (unsigned int) *pidit);
> + retval = EXIT_FAILURE;
> break;
> }
> unsigned int i = 0;
> @@ -273,26 +277,49 @@ int main(int argc, char *argv[])
> break;
>
> case ENABLE_MARKER:
> - if(opts.regex)
> - ustcmd_set_marker_state(opts.regex, 1, *pidit);
> + if (opts.regex) {
> + if (ustcmd_set_marker_state(opts.regex, 1, *pidit)) {
> + ERR("error while trying to enable marker %s with PID %u\n",
> + opts.regex, (unsigned int) *pidit);
> + retval = EXIT_FAILURE;
> + }
> + }
> break;
> case DISABLE_MARKER:
> - if(opts.regex)
> - ustcmd_set_marker_state(opts.regex, 0, *pidit);
> + if (opts.regex) {
> + if (ustcmd_set_marker_state(opts.regex, 0, *pidit)) {
> + ERR("error while trying to disable marker %s with PID %u\n",
> + opts.regex, (unsigned int) *pidit);
> + retval = EXIT_FAILURE;
> + }
> + }
> break;
>
> case SET_SUBBUF_SIZE:
> - ustcmd_set_subbuf_size(opts.regex, *pidit);
> + if (opts.regex) {
> + if (ustcmd_set_subbuf_size(opts.regex, *pidit)) {
> + ERR("error while trying to set the size of subbuffers with PID %u\n",
> + (unsigned int) *pidit);
> + retval = EXIT_FAILURE;
> + }
> + }
> break;
>
> case SET_SUBBUF_NUM:
> - ustcmd_set_subbuf_num(opts.regex, *pidit);
> + if (opts.regex) {
> + if (ustcmd_set_subbuf_num(opts.regex, *pidit)) {
> + ERR("error while trying to set the number of subbuffers with PID %u\n",
> + (unsigned int) *pidit);
> + retval = EXIT_FAILURE;
> + }
> + }
> break;
>
> case GET_SUBBUF_SIZE:
> result = ustcmd_get_subbuf_size(opts.regex, *pidit);
> if (result == -1) {
> ERR("error while trying to get_subuf_size with PID %u\n", (unsigned int) *pidit);
> + retval = EXIT_FAILURE;
> break;
> }
>
> @@ -303,6 +330,7 @@ int main(int argc, char *argv[])
> result = ustcmd_get_subbuf_num(opts.regex, *pidit);
> if (result == -1) {
> ERR("error while trying to get_subuf_num with PID %u\n", (unsigned int) *pidit);
> + retval = EXIT_FAILURE;
> break;
> }
>
> @@ -313,7 +341,7 @@ int main(int argc, char *argv[])
> result = ustcmd_alloc_trace(*pidit);
> if (result) {
> ERR("error while trying to alloc trace with PID %u\n", (unsigned int) *pidit);
> - break;
> + retval = EXIT_FAILURE;
> }
> break;
>
> @@ -321,6 +349,7 @@ int main(int argc, char *argv[])
> result = ustcmd_get_sock_path(&tmp, *pidit);
> if (result) {
> ERR("error while trying to get sock path for PID %u\n", (unsigned int) *pidit);
> + retval = EXIT_FAILURE;
> break;
> }
> printf("the socket path is %s\n", tmp);
> @@ -331,6 +360,7 @@ int main(int argc, char *argv[])
> result = ustcmd_set_sock_path(opts.regex, *pidit);
> if (result) {
> ERR("error while trying to set sock path for PID %u\n", (unsigned int) *pidit);
> + retval = EXIT_FAILURE;
> }
> break;
>
> @@ -338,12 +368,14 @@ int main(int argc, char *argv[])
> result = ustcmd_force_switch(*pidit);
> if (result) {
> ERR("error while trying to force switch for PID %u\n", (unsigned int) *pidit);
> + retval = EXIT_FAILURE;
> }
> break;
>
> default:
> ERR("unknown command\n");
> - break;
> + retval = EXIT_FAILURE;
> + break;
> }
>
> pidit++;
> @@ -356,6 +388,6 @@ int main(int argc, char *argv[])
> free(opts.regex);
> }
>
> - return 0;
> + return retval;
> }
>
> --
> 1.7.2.3
>
>
> _______________________________________________
> ltt-dev mailing list
> ltt-dev at lists.casi.polymtl.ca
> http://lists.casi.polymtl.ca/cgi-bin/mailman/listinfo/ltt-dev
>
--
Mathieu Desnoyers
Operating System Efficiency R&D Consultant
EfficiOS Inc.
http://www.efficios.com
^ permalink raw reply [flat|nested] 2+ messages in thread
end of thread, other threads:[~2010-09-09 17:01 UTC | newest]
Thread overview: 2+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2010-09-09 16:48 [ltt-dev] [UST PATCH] Set the exit status of ustctl main function v3 David Goulet
2010-09-09 17:01 ` Mathieu Desnoyers
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox