some questions about gdb

some questions about gdb

[loody]

hi all:
I have some questions about using gdb
1. I compile the kernel with -g but I cannot see the disassembly.
My pc increase 4 when I type 'n' but I cannot see the disassembly.

Program received signal 0, Signal 0.
0x8043e59c in kernel_entry () at arch/mips/kernel/head.S:97
97	#else
(gdb) n

Program received signal 0, Signal 0.
0x8043e5a0 in kernel_entry () at arch/mips/kernel/head.S:97
97	#else
(gdb) si

Program received signal 0, Signal 0.
0x8043e5a4 in kernel_entry () at arch/mips/kernel/head.S:97
97	#else
(gdb)

Did I miss any configuration?

2. I search gdb and which tell me there is a command, disassemble /m,
which can mix source and assembly.
But I use it on my mips platform, it said:
(gdb) disassemble /m irq_enter
A syntax error in expression, near `/m'.
(gdb) list
276     void irq_enter(void)
277     {
278             int cpu = smp_processor_id();
279
280             rcu_irq_enter();
281             if (idle_cpu(cpu) && !in_interrupt()) {
282                     __irq_enter();
283                     tick_check_idle(cpu);
284             } else
285                     __irq_enter();
(gdb)

3. is any document about how to compile insight6.8.1 with mips gdb 7.2?
I google it and I found for arm version
http://old.nabble.com/patch-for-insight-6.8.1-to29485252.html
if I do the same thing for mips gdb, should I patch gdb?


-- 
Thanks for your help,
miloody

Re: some questions about gdb

[loody]

hi all:

2011/1/8 loody <miloody@gmail.com>:
> hi all:
> I have some questions about using gdb
> 1. I compile the kernel with -g but I cannot see the disassembly.
> My pc increase 4 when I type 'n' but I cannot see the disassembly.
>
> Program received signal 0, Signal 0.
> 0x8043e59c in kernel_entry () at arch/mips/kernel/head.S:97
> 97      #else
> (gdb) n
>
> Program received signal 0, Signal 0.
> 0x8043e5a0 in kernel_entry () at arch/mips/kernel/head.S:97
> 97      #else
> (gdb) si
>
> Program received signal 0, Signal 0.
> 0x8043e5a4 in kernel_entry () at arch/mips/kernel/head.S:97
> 97      #else
> (gdb)
>
> Did I miss any configuration?
>
> 2. I search gdb and which tell me there is a command, disassemble /m,
> which can mix source and assembly.
> But I use it on my mips platform, it said:
> (gdb) disassemble /m irq_enter
> A syntax error in expression, near `/m'.
> (gdb) list
> 276     void irq_enter(void)
> 277     {
> 278             int cpu = smp_processor_id();
> 279
> 280             rcu_irq_enter();
> 281             if (idle_cpu(cpu) && !in_interrupt()) {
> 282                     __irq_enter();
> 283                     tick_check_idle(cpu);
> 284             } else
> 285                     __irq_enter();
> (gdb)
>
> 3. is any document about how to compile insight6.8.1 with mips gdb 7.2?
> I google it and I found for arm version
> http://old.nabble.com/patch-for-insight-6.8.1-to29485252.html
> if I do the same thing for mips gdb, should I patch gdb?
There is something I forget to say, I can successfully compile insight
6.8.1 for debug mips but source window is blank.
so I want to try whether it will be fine if I change the default gdb
from 6.8 to 7.2.
What I only need to do is just change gdb folder with the new one.
thanks a lot,
miloody

Re: some questions about gdb

[Tom Tromey]

>>>>> ">" == loody  <miloody@gmail.com> writes:

>> 1. I compile the kernel with -g but I cannot see the disassembly.
>> My pc increase 4 when I type 'n' but I cannot see the disassembly.

I don't know what is going on here.

>> 2. I search gdb and which tell me there is a command, disassemble /m,
>> which can mix source and assembly.
>> But I use it on my mips platform, it said:
>> (gdb) disassemble /m irq_enter
>> A syntax error in expression, near `/m'.

You probably have too old a version of gdb.

>> 3. is any document about how to compile insight6.8.1 with mips gdb 7.2?

You can't do this.  You have to get a corresponding version of Insight.
I don't know whether a new version of Insight has been released.

Tom

Re: some questions about gdb

[Keith Seitz]

On 01/10/2011 12:58 PM, Tom Tromey wrote:
> You can't do this.  You have to get a corresponding version of Insight.
> I don't know whether a new version of Insight has been released.

No, I haven't made a release since 6.8. Mostly because I didn't think no 
one else was using it. There have been enough requests, though, to 
warrant a release.

I will release Insight shortly after the next GDB release. I am just 
fiddling with MinGW (which I hope to have "done" today-ish).

But as it is, you can grab a CVS snapshot of src/gdb/gdbtk and 
src/libgui (and src/tcl, src/tk/, src/itcl if you need those) from the 
around the same date as the release you're interested in.

If you want a 7.2 vintage Insight, CVS HEAD should work. Just drop in 
src/gdb/gdbtk and src/libgui, and you should be able to build Insight. 
This can be discussed on the insight@ mailing list if more details are 
needed.

Keith

Re: some questions about gdb

[loody]

hi keith and Tom:

2011/1/11 Keith Seitz <keiths@redhat.com>:
> On 01/10/2011 12:58 PM, Tom Tromey wrote:
>>
>> You can't do this.  You have to get a corresponding version of Insight.
>> I don't know whether a new version of Insight has been released.
>
> No, I haven't made a release since 6.8. Mostly because I didn't think no one
> else was using it. There have been enough requests, though, to warrant a
> release.
>
> I will release Insight shortly after the next GDB release. I am just
> fiddling with MinGW (which I hope to have "done" today-ish).
>
> But as it is, you can grab a CVS snapshot of src/gdb/gdbtk and src/libgui
> (and src/tcl, src/tk/, src/itcl if you need those) from the around the same
> date as the release you're interested in.
>
> If you want a 7.2 vintage Insight, CVS HEAD should work. Just drop in
> src/gdb/gdbtk and src/libgui, and you should be able to build Insight. This
> can be discussed on the insight@ mailing list if more details are needed.
I got the head version from insight CVS and it works with gdb 7.2.
But each time I press "n", gdb step as I press "si".
That means "n" should be like execute a line of c code, but on my gdb,
it execute an assembly line.
I config it as mipsel-linux.
Should I add more configs?
Thanks your help,
miloody

Re: some questions about gdb

[Tom Tromey]

>>>>> ">" == loody  <miloody@gmail.com> writes:

>> I got the head version from insight CVS and it works with gdb 7.2.
>> But each time I press "n", gdb step as I press "si".
>> That means "n" should be like execute a line of c code, but on my gdb,
>> it execute an assembly line.
>> I config it as mipsel-linux.
>> Should I add more configs?

Offhand, I don't know what this problem is.  Do you have the same
problem with the CLI gdb?

Note that insight has its own mailing list.
You may get better results asking there.

Tom

Re: some questions about gdb

[Petr Hluzín]

Hello

On 10 January 2011 22:47, Keith Seitz <keiths@redhat.com> wrote:
> On 01/10/2011 12:58 PM, Tom Tromey wrote:
>>
>> You can't do this.  You have to get a corresponding version of Insight.
>> I don't know whether a new version of Insight has been released.
>
> No, I haven't made a release since 6.8. Mostly because I didn't think no one
> else was using it. There have been enough requests, though, to warrant a
> release.

Just to throw some numbers for amusement:

According to Ubuntu Popularity Contest [1] about 21 people did use
Insight package recently. If this includes only last 30 days (I do not
know, it is not documented) the Holidays did skew the number. About
2443 did install the package, though.

Of course Ubuntu's audience is not programmers. Debian's Popularity
Contest claims 95204 submissions so we cannot tell either.

[1] http://popcon.ubuntu.com/by_inst (17 MB)

-- 
Petr Hluzin