PSIM Documentation

PSIM Documentation

[Manoj Iyer]

The readme file under src/sim/ppc mentions links to ftp sites that have
information on how to build and run the simulator.

""A description of how to build PSIM is contained in the file:

                ftp://ftp.ci.com.au/pub/psim/INSTALL
        or      ftp://cambridge.cygnus.com/pub/psim/INSTALL

while an overview of how to use PSIM is in:

        ftp://ftp.ci.com.au/pub/psim/RUN
or      ftp://cambridge.cygnus.com/pub/psim/RUN
""

But none of these links work for me. Are there any alternate sites where
this docmentation is available?


-----
manjo
+++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
+ Cogito ergo sum                                                          +
+++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++

Re: PSIM Documentation

[Dwayne Grant McConnell]

On Wed, 1 Jun 2005, Manoj Iyer wrote:

> The readme file under src/sim/ppc mentions links to ftp sites that have
> information on how to build and run the simulator.
> 
> ""A description of how to build PSIM is contained in the file:
> 
>                 ftp://ftp.ci.com.au/pub/psim/INSTALL
>         or      ftp://cambridge.cygnus.com/pub/psim/INSTALL
> 
> while an overview of how to use PSIM is in:
> 
>         ftp://ftp.ci.com.au/pub/psim/RUN
> or      ftp://cambridge.cygnus.com/pub/psim/RUN
> ""
> 
> But none of these links work for me. Are there any alternate sites where
> this docmentation is available?

ftp://ftp.ci.com.au/pub/psim/README says...

Psim has moved to a new home:
	
	http://sourceware.cygnus.com/psim/

but sourceware.cygnus.com has been replaced by sourceware.com I believe so
http://sourceware.org/psim/
has information.

-- 
Dwayne Grant McConnell <dgm69@us.ibm.com>
Lotus Notes: Dwayne McConnell/Austin/IBM@IBMUS

Re: PSIM Documentation

[Manoj Iyer]

yes but did you try the link? it does not work.


-----
manjo
+++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
+ Cogito ergo sum                                                          +
+++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++

On Wed, 1 Jun 2005, Dwayne Grant McConnell wrote:

> On Wed, 1 Jun 2005, Manoj Iyer wrote:
>
> > The readme file under src/sim/ppc mentions links to ftp sites that have
> > information on how to build and run the simulator.
> >
> > ""A description of how to build PSIM is contained in the file:
> >
> >                 ftp://ftp.ci.com.au/pub/psim/INSTALL
> >         or      ftp://cambridge.cygnus.com/pub/psim/INSTALL
> >
> > while an overview of how to use PSIM is in:
> >
> >         ftp://ftp.ci.com.au/pub/psim/RUN
> > or      ftp://cambridge.cygnus.com/pub/psim/RUN
> > ""
> >
> > But none of these links work for me. Are there any alternate sites where
> > this docmentation is available?
>
> ftp://ftp.ci.com.au/pub/psim/README says...
>
> Psim has moved to a new home:
>
> 	http://sourceware.cygnus.com/psim/
>
> but sourceware.cygnus.com has been replaced by sourceware.com I believe so
> http://sourceware.org/psim/
> has information.
>
> --
> Dwayne Grant McConnell <dgm69@us.ibm.com>
> Lotus Notes: Dwayne McConnell/Austin/IBM@IBMUS
>
>

Re: PSIM Documentation

[Dwayne Grant McConnell]

On Wed, 1 Jun 2005, Manoj Iyer wrote:

> yes but did you try the link? it does not work.

Which link? http://sourceware.org/psim/ works for me. As does the
PSIM User Guide and Reference Manual (http://sourceware.org/psim/manual)
which includes information on building and running. (I haven't tried them 
myself so YMMV.)


> On Wed, 1 Jun 2005, Dwayne Grant McConnell wrote:
> 
> > On Wed, 1 Jun 2005, Manoj Iyer wrote:
> >
> > > The readme file under src/sim/ppc mentions links to ftp sites that have
> > > information on how to build and run the simulator.
> > >
> > > ""A description of how to build PSIM is contained in the file:
> > >
> > >                 ftp://ftp.ci.com.au/pub/psim/INSTALL
> > >         or      ftp://cambridge.cygnus.com/pub/psim/INSTALL
> > >
> > > while an overview of how to use PSIM is in:
> > >
> > >         ftp://ftp.ci.com.au/pub/psim/RUN
> > > or      ftp://cambridge.cygnus.com/pub/psim/RUN
> > > ""
> > >
> > > But none of these links work for me. Are there any alternate sites where
> > > this docmentation is available?
> >
> > ftp://ftp.ci.com.au/pub/psim/README says...
> >
> > Psim has moved to a new home:
> >
> > 	http://sourceware.cygnus.com/psim/
> >
> > but sourceware.cygnus.com has been replaced by sourceware.com I believe so
> > http://sourceware.org/psim/
> > has information.
> >
> > --
> > Dwayne Grant McConnell <dgm69@us.ibm.com>
> > Lotus Notes: Dwayne McConnell/Austin/IBM@IBMUS
> >
> >
> 
> 

-- 
Dwayne Grant McConnell <dgm69@us.ibm.com>
Lotus Notes: Dwayne McConnell/Austin/IBM@IBMUS

RE: PSIM Documentation

[Dave Korn]

----Original Message----
>From: Manoj Iyer
>Sent: 01 June 2005 17:33

> yes but did you try the link? it does not work.
> 

dk@mace /artimi/firmware> wget 'ftp://ftp.ci.com.au/pub/psim/README'
--18:01:23--  ftp://ftp.ci.com.au/pub/psim/README
           => `README'
Resolving ftp.ci.com.au... 203.1.242.2
Connecting to ftp.ci.com.au[203.1.242.2]:21... connected.
Logging in as anonymous ... Logged in!
==> SYST ... done.    ==> PWD ... done.
==> TYPE I ... done.  ==> CWD /pub/psim ... done.
==> PORT ... done.    ==> RETR README ... done.
Length: 70 (unauthoritative)

100%[====================================>] 70            --.--K/s

18:01:35 (683.59 KB/s) - `README' saved [70]

dk@mace /artimi/firmware>


  It works fine (but is *very* slow on some occasions).  Either your
NAT/firewall is giving you problems, or you just didn't wait long enough.


    cheers,
      DaveK
-- 
Can't think of a witty .sigline today....

RE: PSIM Documentation

[Manoj Iyer]

Thanks dave,

Logged off from my vpnclient, my apologies dwayne, yes that link works, I
guess it was my vpnclient or the firewall...

manjo@grumpy:~/documents$ wget ftp://ftp.ci.com.au/pub/psim/README
--20:02:06--  ftp://ftp.ci.com.au/pub/psim/README
           => `README'
Resolving ftp.ci.com.au... 203.1.242.2
Connecting to ftp.ci.com.au[203.1.242.2]:21... connected.
Logging in as anonymous ... Logged in!
==> SYST ... done.    ==> PWD ... done.
==> TYPE I ... done.  ==> CWD /pub/psim ... done.
==> PASV ... done.    ==> RETR README ... done.
Length: 70 (unauthoritative)

100%[====================================>] 70            --.--K/s

20:02:10 (100.68 KB/s) - `README' saved [70]


Thank
-----
manjo
+++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
+ Cogito ergo sum                                                          +
+++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++

On Wed, 1 Jun 2005, Dave Korn wrote:

> ----Original Message----
> >From: Manoj Iyer
> >Sent: 01 June 2005 17:33
>
> > yes but did you try the link? it does not work.
> >
>
> dk@mace /artimi/firmware> wget 'ftp://ftp.ci.com.au/pub/psim/README'
> --18:01:23--  ftp://ftp.ci.com.au/pub/psim/README
>            => `README'
> Resolving ftp.ci.com.au... 203.1.242.2
> Connecting to ftp.ci.com.au[203.1.242.2]:21... connected.
> Logging in as anonymous ... Logged in!
> ==> SYST ... done.    ==> PWD ... done.
> ==> TYPE I ... done.  ==> CWD /pub/psim ... done.
> ==> PORT ... done.    ==> RETR README ... done.
> Length: 70 (unauthoritative)
>
> 100%[====================================>] 70            --.--K/s
>
> 18:01:35 (683.59 KB/s) - `README' saved [70]
>
> dk@mace /artimi/firmware>
>
>
>   It works fine (but is *very* slow on some occasions).  Either your
> NAT/firewall is giving you problems, or you just didn't wait long enough.
>
>
>     cheers,
>       DaveK
> --
> Can't think of a witty .sigline today....
>
>

RE: PSIM Documentation

[Manoj Iyer]

oops not yet... that was not the document I was looking for, that document
contains the link that dwayne posted originaly and that does not work...

http://sourceware.cygnus.com/psim/

Any new links for PSIM documentation?
-----
manjo
+++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
+ Cogito ergo sum                                                          +
+++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++

On Wed, 1 Jun 2005, Manoj Iyer wrote:

>
> Thanks dave,
>
> Logged off from my vpnclient, my apologies dwayne, yes that link works, I
> guess it was my vpnclient or the firewall...
>
> manjo@grumpy:~/documents$ wget ftp://ftp.ci.com.au/pub/psim/README
> --20:02:06--  ftp://ftp.ci.com.au/pub/psim/README
>            => `README'
> Resolving ftp.ci.com.au... 203.1.242.2
> Connecting to ftp.ci.com.au[203.1.242.2]:21... connected.
> Logging in as anonymous ... Logged in!
> ==> SYST ... done.    ==> PWD ... done.
> ==> TYPE I ... done.  ==> CWD /pub/psim ... done.
> ==> PASV ... done.    ==> RETR README ... done.
> Length: 70 (unauthoritative)
>
> 100%[====================================>] 70            --.--K/s
>
> 20:02:10 (100.68 KB/s) - `README' saved [70]
>
>
> Thank
> -----
> manjo
> +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
> + Cogito ergo sum                                                          +
> +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
>
> On Wed, 1 Jun 2005, Dave Korn wrote:
>
> > ----Original Message----
> > >From: Manoj Iyer
> > >Sent: 01 June 2005 17:33
> >
> > > yes but did you try the link? it does not work.
> > >
> >
> > dk@mace /artimi/firmware> wget 'ftp://ftp.ci.com.au/pub/psim/README'
> > --18:01:23--  ftp://ftp.ci.com.au/pub/psim/README
> >            => `README'
> > Resolving ftp.ci.com.au... 203.1.242.2
> > Connecting to ftp.ci.com.au[203.1.242.2]:21... connected.
> > Logging in as anonymous ... Logged in!
> > ==> SYST ... done.    ==> PWD ... done.
> > ==> TYPE I ... done.  ==> CWD /pub/psim ... done.
> > ==> PORT ... done.    ==> RETR README ... done.
> > Length: 70 (unauthoritative)
> >
> > 100%[====================================>] 70            --.--K/s
> >
> > 18:01:35 (683.59 KB/s) - `README' saved [70]
> >
> > dk@mace /artimi/firmware>
> >
> >
> >   It works fine (but is *very* slow on some occasions).  Either your
> > NAT/firewall is giving you problems, or you just didn't wait long enough.
> >
> >
> >     cheers,
> >       DaveK
> > --
> > Can't think of a witty .sigline today....
> >
> >
>

RE: PSIM Documentation

[Dave Korn]

----Original Message----
>From: Manoj Iyer
>Sent: 01 June 2005 19:00

> oops not yet... that was not the document I was looking for, that document
> contains the link that dwayne posted originaly and that does not work...
> 
> http://sourceware.cygnus.com/psim/


  Re-read Dwayne's post!  And his reply!



    cheers,
      DaveK
-- 
Can't think of a witty .sigline today....

Determine if running under GDB

[Nick Savoiu]

Can a program tell if it's being run under GBD control?

Thanks,
Nick

Re: PSIM Documentation

[Andrew Cagney]

Manoj Iyer wrote:

(yes as others have pointed out the host name changed).

I've the original source sitting here.  I'll add it to the repository 
(with a proper fsf (C)) once the FSF signed off on some paper work. 
DJE@ibm can provide you with more details.
.