Ignoring packet error, continuing... with --host=sparc-sun-solari s2.5.1 --target=i386-coff using GNU gdb 4.17-intelp2-990419

Ignoring packet error, continuing... with --host=sparc-sun-solari s2.5.1 --target=i386-coff using GNU gdb 4.17-intelp2-990419

[Setty, Vinay J (Vinay)** CTR **]

Hi all,
I am using GNU gdb 4.17-intelp2-990419 with --host=sparc-sun-solaris2.5.1
--target=i386-coff configuration options and my target intel pentium II
achitecture is connected throught an ethernet serial port. and I am running
gdb client in solaris workstation. The problem is whenever I try to give any
command in gdb clinet I get the following error. some times I am able to set
the break point but if I give continue it doesn't stop at the break point.

The error is :
Ignoring packet error, continuing...
Ignoring packet error, continuing...
Ignoring packet error, continuing...
Ignoring packet error, continuing...
Remote packet too long:
01000000dc341200080100a000000000ba552206ba552206dc4000000000000000000000ffff
0000000000000000ffff0000000000000000ffff0000000000000000ffff0000000000000000
0000000000000000000000000000ba552206ba552206dc440800b4632a06e82c0b0602000000
1000000008000000080000000800000008000000080000000000000000000000ffff00000000
000000000000ffff0000000000000000ffff0000000000000000ffff00000000000000000000
0000000000000000000
Ignoring packet error, continuing...
Ignoring packet error, continuing...
Remote packet too long:
01000000dc341200080100a000000000ba55200008000000080000000000000000000000ffff
0000000000000000ffff0000000000000000ffff0000000000000000ffff0000000000000000
000000000000080100a000000000ba552206ba552206dc440800b4632a06e82c0b0602000000
1000000008000000080000000800000008000000080000000000000000000000f000000ffff0
000000000000000ffff0000000000000000ffff0000000000000000ffff00000000000000000
0000000000000000000
Ignoring packet error, continuing...
Remote packet too long:
01000000dc341200080100a000000000ba50000ba552206ba552206dc440800b4632a06e82c0
b06020000001000000008000000080000000800000008000000080000000000000000000000f
fff00000000000000000000000ffff0000000000000000ffff0000000000000000ffff000000
0000000000000000000000000000000000000000000000000000000000000004632a06e82c0b
06020000001000000008000000080000000800000008000000080000000000000000000000ff
ff0000000000000000f
Ignoring packet error, continuing...
Remote packet too long:
01000000dc341200080100a000000000ba00000ba552206ba552206dc440800b4632a06e82c0
b06020000001000000008000000080000000800000008000000080000000000000000000000f
fff00000000000000000000000ffff0000000000000000ffff0000000000000000ffff000000
000000000000000000000000000000000000000000000000000000000000004632a0--
-Type <return> to continue, or q <return> to quit---

If any of u have any solution please tell me, it would be of great help.
Thanks in advance

Regards,
Vinay Setty,
Project Intern,
Lucent Technologies,
Extn: 2045
Direct: 51191045

Re: Ignoring packet error, continuing... with --host=sparc-sun-solari s2.5.1 --target=i386-coff using GNU gdb 4.17-intelp2-990419

[Steven Johnson]

Hi Vinay,

The response you are going to get is "Your version of GDB is 6 years 
old, we suggest you upgrade to a newer version and try that".

Ignoring packet error, continuing...

means your target is sending data that your version of GDB doesnt like.  
This is possible because your target is newer that the version of GDB 
you are using, and the Remote Protocol probably has changed in the last 
6 years.  At least to the extent that there may be new features or 
replies your old version of GDB doesnt support. It could also be for any 
number of other reasons, all of which, including this one, would be 
speculation.

The only way you are going to track this is turn on Remote Serial 
protocol debuging (I dont know how to do this in V4.17, check your docs) 
and then look at the messages your version of GDB is sending, and what 
it is receiving in reply, and what it expects to receive. (Again check 
your docs, the remote serial protocol should be documented in there).  
You also may want to check the code, sometimes things like case 
sensitivity of hex numbers, and the like arent well documented.  So your 
target sends a hex number in uppercase, but for that response GDB only 
likes lower case (that sort of thing).  So if it looks right with your 
understanding of the doc, check the code for more enlightenment.  If its 
this sort of thing, you will have to either modify your target, or GDB 
so they can understand one another.

I know this isnt a very helpful reply, but is there any reason why you 
have to use a 6 year old version of GDB?  If you can use a newer 
version, you might want to try that, and save frustration.  You may be 
left with the same problem, but at least you will know it isnt because 
of your vintage GDB.

Steven Johnson


Setty, Vinay J (Vinay)** CTR ** wrote:

>Hi all,
>I am using GNU gdb 4.17-intelp2-990419 with --host=sparc-sun-solaris2.5.1
>--target=i386-coff configuration options and my target intel pentium II
>achitecture is connected throught an ethernet serial port. and I am running
>gdb client in solaris workstation. The problem is whenever I try to give any
>command in gdb clinet I get the following error. some times I am able to set
>the break point but if I give continue it doesn't stop at the break point.
>
>The error is :
>Ignoring packet error, continuing...
>  
>