Mirror of the gdb-patches mailing list
 help / color / mirror / Atom feed
* [rfc] [9/9] Multi-target support: Add --enable-targets= option
@ 2007-10-26  1:31 Ulrich Weigand
  2007-10-26  9:35 ` Eli Zaretskii
  0 siblings, 1 reply; 5+ messages in thread
From: Ulrich Weigand @ 2007-10-26  1:31 UTC (permalink / raw)
  To: gdb-patches

Hello,

this finally adds the --enable-targets= configure option.  The semantics
is exactly the same as the existing binutils precedent.  The basic idea
is that configure executes configure.tgt multiple times, once for each
desired target configuration, and accumulates all setting where appropriate
(currently only gdb_target_obs).  Other settings remain to be determined
by the "master" target only.

The one special case is --enable-targets=all, which simply uses an
explicit list of all target-dependent object files in the Makefile.
(This also matches precedent, e.g. in the linker.)

Bye,
Ulrich


ChangeLog:

	* configure.ac (--enable-targets): New configure option.
	Collect gdb_target_obs of multiple targets into TARGET_OBS.
	Call configure.tgt multiple times, using $targ as operand.
	* configure.tgt: Operate on $targ instead of $target.
	* configure: Regenerate.
	* Makefile.in (ALL_TARGET_OBS): Define.

diff -urNp gdb-orig/gdb/configure gdb-head/gdb/configure
--- gdb-orig/gdb/configure	2007-10-25 23:49:47.714216171 +0200
+++ gdb-head/gdb/configure	2007-10-26 00:00:31.824201573 +0200
@@ -860,6 +860,7 @@ Optional Features:
   --enable-FEATURE[=ARG]  include FEATURE [ARG=yes]
   --enable-maintainer-mode  enable make rules and dependencies not useful
 			  (and sometimes confusing) to the casual installer
+  --enable-targets        alternative target configurations
   --disable-gdbcli        disable command-line interface (CLI)
   --disable-gdbmi         disable machine-interface (MI)
   --enable-tui            enable full-screen terminal user interface (TUI)
@@ -3080,6 +3081,20 @@ esac
 subdirs="$subdirs doc testsuite"
 
 
+# Check whether to support alternative target configurations
+# Check whether --enable-targets or --disable-targets was given.
+if test "${enable_targets+set}" = set; then
+  enableval="$enable_targets"
+  case "${enableval}" in
+  yes | "") { { echo "$as_me:$LINENO: error: enable-targets option must specify target names or 'all'" >&5
+echo "$as_me: error: enable-targets option must specify target names or 'all'" >&2;}
+   { (exit 1); exit 1; }; }
+            ;;
+  no)       enable_targets= ;;
+  *)        enable_targets=$enableval ;;
+esac
+fi;
+
 # Provide defaults for some variables set by the per-host and per-target
 # configuration.
 gdb_host_obs=posix-hdep.o
@@ -3092,7 +3107,49 @@ fi
 
 . $srcdir/configure.host
 
-. $srcdir/configure.tgt
+# Accumulate some settings from configure.tgt over all enabled targets
+
+TARGET_OBS=
+all_targets=
+
+for targ_alias in `echo $target_alias $enable_targets | sed 's/,/ /g'`
+do
+  if test "$targ_alias" = "all"; then
+    all_targets=true
+  else
+    # Canonicalize the secondary target names.
+    result=`$ac_config_sub $targ_alias 2>/dev/null`
+    if test -n "$result"; then
+        targ=$result
+    else
+        targ=$targ_alias
+    fi
+
+    . ${srcdir}/configure.tgt
+
+    # Target-specific object files
+    for i in ${gdb_target_obs}; do
+        case " $TARGET_OBS " in
+        *" ${i} "*) ;;
+        *)
+          TARGET_OBS="$TARGET_OBS ${i}"
+          ;;
+        esac
+    done
+  fi
+done
+
+if test x${all_targets} = xtrue; then
+  TARGET_OBS='$(ALL_TARGET_OBS)'
+fi
+
+
+
+# For other settings, only the main target counts.
+gdb_sim=
+gdb_osabi=
+build_gdbserver=
+targ=$target; . ${srcdir}/configure.tgt
 
 # Fetch the default architecture and default target vector from BFD.
 targ=$target; . $srcdir/../bfd/config.bfd
@@ -3116,9 +3173,6 @@ _ACEOF
 
 fi
 
-TARGET_OBS="${gdb_target_obs}"
-
-
 test "$program_prefix" != NONE &&
   program_transform_name="s,^,$program_prefix,;$program_transform_name"
 # Use a double $ so make ignores it.
diff -urNp gdb-orig/gdb/configure.ac gdb-head/gdb/configure.ac
--- gdb-orig/gdb/configure.ac	2007-10-25 23:49:47.724214729 +0200
+++ gdb-head/gdb/configure.ac	2007-10-26 00:00:31.868195229 +0200
@@ -91,6 +91,16 @@ esac
 
 AC_CONFIG_SUBDIRS(doc testsuite)
 
+# Check whether to support alternative target configurations
+AC_ARG_ENABLE(targets,
+[  --enable-targets        alternative target configurations],
+[case "${enableval}" in
+  yes | "") AC_ERROR(enable-targets option must specify target names or 'all')
+            ;;
+  no)       enable_targets= ;;
+  *)        enable_targets=$enableval ;;
+esac])
+
 # Provide defaults for some variables set by the per-host and per-target
 # configuration.
 gdb_host_obs=posix-hdep.o
@@ -103,7 +113,49 @@ fi
 
 . $srcdir/configure.host
 
-. $srcdir/configure.tgt
+# Accumulate some settings from configure.tgt over all enabled targets
+
+TARGET_OBS=
+all_targets=
+
+for targ_alias in `echo $target_alias $enable_targets | sed 's/,/ /g'`
+do
+  if test "$targ_alias" = "all"; then
+    all_targets=true
+  else
+    # Canonicalize the secondary target names.
+    result=`$ac_config_sub $targ_alias 2>/dev/null`
+    if test -n "$result"; then
+        targ=$result
+    else
+        targ=$targ_alias
+    fi
+
+    . ${srcdir}/configure.tgt
+
+    # Target-specific object files
+    for i in ${gdb_target_obs}; do
+        case " $TARGET_OBS " in
+        *" ${i} "*) ;;
+        *)
+          TARGET_OBS="$TARGET_OBS ${i}"
+          ;;
+        esac
+    done
+  fi
+done
+
+if test x${all_targets} = xtrue; then
+  TARGET_OBS='$(ALL_TARGET_OBS)'
+fi
+
+AC_SUBST(TARGET_OBS)
+
+# For other settings, only the main target counts.
+gdb_sim=
+gdb_osabi=
+build_gdbserver=
+targ=$target; . ${srcdir}/configure.tgt
 
 # Fetch the default architecture and default target vector from BFD.
 targ=$target; . $srcdir/../bfd/config.bfd
@@ -121,9 +173,6 @@ if test "x$targ_defvec" != x; then
     [Define to BFD's default target vector. ])
 fi
 
-TARGET_OBS="${gdb_target_obs}"
-AC_SUBST(TARGET_OBS)
-
 AC_ARG_PROGRAM
 
 # The CLI cannot be disabled yet, but may be in the future.
diff -urNp gdb-orig/gdb/configure.tgt gdb-head/gdb/configure.tgt
--- gdb-orig/gdb/configure.tgt	2007-10-25 23:49:47.730213864 +0200
+++ gdb-head/gdb/configure.tgt	2007-10-26 00:01:59.428865689 +0200
@@ -7,7 +7,7 @@
 #  gdb_osabi		default OS ABI to use with target
 #  build_gdbserver	set to "yes" if gdbserver supports target
 
-case $target in
+case $targ in
  d10v-*-* | \
  hppa*-*-hiux* | \
  i[34567]86-ncr-* | \
@@ -19,7 +19,7 @@ case $target in
  rs6000-*-lynxos* | \
  sh*-*-pe | \
  null)
-    echo "*** Configuration $target is obsolete." >&2
+    echo "*** Configuration $targ is obsolete." >&2
     echo "*** Support has been REMOVED." >&2
     exit 1
     ;;
@@ -27,7 +27,7 @@ esac
 
 # map target info into gdb names.
 
-case "${target}" in
+case "${targ}" in
 
 alpha*-*-osf*)
 	# Target: Little-endian Alpha running OSF/1
@@ -521,7 +521,7 @@ esac
 
 # map target onto default OS ABI
 
-case "${target}" in
+case "${targ}" in
 *-*-freebsd*)	gdb_osabi=GDB_OSABI_FREEBSD_ELF ;;
 *-*-linux*)	gdb_osabi=GDB_OSABI_LINUX ;;
 *-*-nto*)	gdb_osabi=GDB_OSABI_QNXNTO ;;
diff -urNp gdb-orig/gdb/Makefile.in gdb-head/gdb/Makefile.in
--- gdb-orig/gdb/Makefile.in	2007-10-26 00:00:20.966038303 +0200
+++ gdb-head/gdb/Makefile.in	2007-10-26 00:00:31.884192922 +0200
@@ -425,6 +425,62 @@ SIM_OBS = @SIM_OBS@
 # Target-dependent object files.
 TARGET_OBS = @TARGET_OBS@
 
+# All target-dependent objects files (used with --enable-targets=all).
+ALL_TARGET_OBS = \
+	alphabsd-tdep.o alphafbsd-tdep.o alpha-linux-tdep.o alpha-mdebug-tdep.o \
+	alphanbsd-tdep.o alphaobsd-tdep.o alpha-osf1-tdep.o alpha-tdep.o \
+	amd64fbsd-tdep.o amd64-linux-tdep.o amd64nbsd-tdep.o amd64obsd-tdep.o \
+	amd64-sol2-tdep.o amd64-tdep.o \
+	armbsd-tdep.o arm-linux-tdep.o armnbsd-tdep.o armobsd-tdep.o \
+	arm-tdep.o arm-wince-tdep.o \
+	avr-tdep.o \
+	cris-tdep.o \
+	frv-linux-tdep.o frv-tdep.o \
+	h8300-tdep.o \
+	hppabsd-tdep.o hppa-hpux-tdep.o hppa-linux-tdep.o hppa-tdep.o \
+	i386bsd-tdep.o i386-cygwin-tdep.o i386fbsd-tdep.o i386gnu-tdep.o \
+	i386-linux-tdep.o i386nbsd-tdep.o i386-nto-tdep.o i386obsd-tdep.o \
+	i386-sol2-tdep.o i386-tdep.o i387-tdep.o \
+	ia64-linux-tdep.o ia64-tdep.o \
+	iq2000-tdep.o \
+	m32c-tdep.o \
+	m32r-linux-tdep.o m32r-tdep.o \
+	m68hc11-tdep.o \
+	m68kbsd-tdep.o m68klinux-tdep.o m68k-tdep.o \
+	m88k-tdep.o \
+	mep-tdep.o \
+	mips64obsd-tdep.o mips-irix-tdep.o mips-linux-tdep.o \
+	mipsnbsd-tdep.o mips-tdep.o \
+	mn10300-linux-tdep.o mn10300-tdep.o \
+	mt-tdep.o \
+	nto-tdep.o \
+	ppc-linux-tdep.o ppcnbsd-tdep.o ppcobsd-tdep.o ppc-sysv-tdep.o \
+	rs6000-aix-tdep.o rs6000-tdep.o \
+	s390-tdep.o \
+	score-tdep.o \
+	sh64-tdep.o sh-linux-tdep.o shnbsd-tdep.o sh-tdep.o \
+	sparc64fbsd-tdep.o sparc64-linux-tdep.o sparc64nbsd-tdep.o \
+	sparc64obsd-tdep.o sparc64-sol2-tdep.o sparc64-tdep.o \
+	sparc-linux-tdep.o sparcnbsd-tdep.o sparcobsd-tdep.o \
+	sparc-sol2-tdep.o sparc-tdep.o \
+	spu-tdep.o \
+	v850-tdep.o \
+	vaxnbsd-tdep.o vaxobsd-tdep.o vax-tdep.o \
+	xstormy16-tdep.o \
+	xtensa-config.o xtensa-tdep.o \
+	glibc-tdep.o \
+	bsd-uthread.o \
+	nbsd-tdep.o obsd-tdep.o \
+	sol2-tdep.o \
+	solib.o solib-frv.o solib-irix.o solib-svr4.o solib-target.o \
+	solib-som.o solib-pa64.o \
+	dbug-rom.o dink32-rom.o ppcbug-rom.o m32r-rom.o dsrec.o monitor.o \
+	remote-m32r-sdi.o \
+	xcoffread.o \
+	prologue-value.o \
+	symfile-mem.o \
+	corelow.o
+
 # Host-dependent makefile fragment comes in here.
 @host_makefile_frag@
 # End of host-dependent makefile fragment
-- 
  Dr. Ulrich Weigand
  GNU Toolchain for Linux on System z and Cell BE
  Ulrich.Weigand@de.ibm.com


^ permalink raw reply	[flat|nested] 5+ messages in thread
end of thread, other threads:[~2007-10-26 15:30 UTC | newest]

Thread overview: 5+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2007-10-26  1:31 [rfc] [9/9] Multi-target support: Add --enable-targets= option Ulrich Weigand
2007-10-26  9:35 ` Eli Zaretskii
2007-10-26 13:05   ` Daniel Jacobowitz
2007-10-26 14:54     ` Ulrich Weigand
2007-10-26 15:39       ` Eli Zaretskii

This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox