From: Charlie Jenkins <charlie@rivosinc.com>
To: Sameer Natu <snatu@whileone.in>, Andrew Burgess <aburgess@redhat.com>
Cc: gdb-patches@sourceware.org
Subject: Re: [PATCH v5] RISC-V: support for vector register accesses via ptrace() in RISC-V Linux native
Date: Tue, 17 Jun 2025 16:43:15 -0700 [thread overview]
Message-ID: <aFH9kyDGSwMrRo1w@ghost> (raw)
In-Reply-To: <aCYpbZRtFLzJMnOt@ghost>
On Thu, May 15, 2025 at 10:50:37AM -0700, Charlie Jenkins wrote:
> On Wed, May 07, 2025 at 02:16:23PM -0700, Charlie Jenkins wrote:
> > On Wed, May 07, 2025 at 11:57:09AM +0000, Sameer Natu wrote:
> > > From: Sameer Natu <snatu@whileone.in>
> > >
> > > Add vector registers and CSRs
> > >
> > > Co-Authored-By: Greg Savin <greg.savin@sifive.com>
> > Reviewed-by: Charlie Jenkins <charlie@rivosinc.com>
> > Tested-by: Charlie Jenkins <charlie@rivosinc.com>
> >
> > Andrew, please let us know your feedback!
>
> Just pinging this thread in case it got lost.
Andrew, it would be great to have this merged in. Do you have concerns
with this patch?
- Charlie
>
> >
> > - Charlie
> >
> >
> > > ---
> > > A v5 re-spin of the original patch. Tested with latest kernel 6.14.2 on RISCV QEMU.
> > > Removed Magic Numbers from v2 patch and worked on review comments of v2 patch.
> > > ---
> > > gdb/arch/riscv.c | 180 ++++++++++++++++++++++++++++++++++-
> > > gdb/nat/riscv-linux-tdesc.c | 68 +++++++++++++
> > > gdb/nat/riscv-linux-tdesc.h | 24 +++++
> > > gdb/riscv-linux-nat.c | 162 +++++++++++++++++++++++++++++++
> > > gdb/riscv-linux-tdep.c | 133 ++++++++++++++++++++++++++
> > > gdb/riscv-tdep.c | 49 +++++++++-
> > > gdb/riscv-tdep.h | 6 ++
> > > gdbserver/linux-riscv-low.cc | 110 +++++++++++++++++++++
> > > include/elf/common.h | 1 +
> > > 9 files changed, 726 insertions(+), 7 deletions(-)
> > >
> > > diff --git a/gdb/arch/riscv.c b/gdb/arch/riscv.c
> > > index a6188ea3a8c..f1f5d83d60a 100644
> > > --- a/gdb/arch/riscv.c
> > > +++ b/gdb/arch/riscv.c
> > > @@ -25,12 +25,30 @@
> > > #include "../features/riscv/64bit-fpu.c"
> > > #include "../features/riscv/rv32e-xregs.c"
> > >
> > > +#include "opcode/riscv-opc.h"
> > > +
> > > #ifndef GDBSERVER
> > > #define STATIC_IN_GDB static
> > > #else
> > > #define STATIC_IN_GDB
> > > #endif
> > >
> > > +#ifdef GDBSERVER
> > > +/* Work around issue where trying to include riscv-tdep.h (to get access to canonical RISCV_V0_REGNUM declaration
> > > + from that header) is problamtic for gdbserver build. */
> > > +#define RISCV_V0_REGNUM 4162
> > > +#else
> > > +#include "riscv-tdep.h"
> > > +#include "defs.h"
> > > +#endif
> > > +
> > > +static int
> > > +create_feature_riscv_vector_from_features (struct target_desc *result,
> > > + long regnum,
> > > + const struct riscv_gdbarch_features
> > > + features);
> > > +
> > > +
> > > /* See arch/riscv.h. */
> > >
> > > STATIC_IN_GDB target_desc_up
> > > @@ -83,15 +101,169 @@ riscv_create_target_description (const struct riscv_gdbarch_features features)
> > > else if (features.flen == 8)
> > > regnum = create_feature_riscv_64bit_fpu (tdesc.get (), regnum);
> > >
> > > - /* Currently GDB only supports vector features coming from remote
> > > - targets. We don't support creating vector features on native targets
> > > - (yet). */
> > > if (features.vlen != 0)
> > > - error (_("unable to create vector feature"));
> > > + regnum =
> > > + create_feature_riscv_vector_from_features (tdesc.get (),
> > > + regnum, features);
> > >
> > > return tdesc;
> > > }
> > >
> > > +
> > > +
> > > +/* Usually, these target_desc instances are static for an architecture, and expressable
> > > + in XML format, but this is a special case where length of a RISC-V vector register
> > > + is not architecturally fixed to a constant (the maximuim width is a defined constant,
> > > + but it's nice to tailor a target description the actual VLENB) */
> > > +static int
> > > +create_feature_riscv_vector_from_features (struct target_desc *result,
> > > + long regnum,
> > > + const struct riscv_gdbarch_features
> > > + features)
> > > +{
> > > + struct tdesc_feature *feature;
> > > + unsigned long bitsize;
> > > +
> > > + feature = tdesc_create_feature (result, "org.gnu.gdb.riscv.vector");
> > > + tdesc_type *element_type;
> > > +
> > > + /* if VLENB is present (which we know it is present if execution reaches this function),
> > > + then we know by definition that it is at least 4 bytes wide */
> > > +
> > > + element_type = tdesc_named_type (feature, "uint8");
> > > + tdesc_create_vector (feature, "bytes", element_type, features.vlen);
> > > +
> > > + element_type = tdesc_named_type (feature, "uint16");
> > > + tdesc_create_vector (feature, "shorts", element_type, features.vlen / 2);
> > > +
> > > + element_type = tdesc_named_type (feature, "uint32");
> > > + tdesc_create_vector (feature, "words", element_type, features.vlen / 4);
> > > +
> > > + /* Need VLENB value checks for element chunks larger than 4 bytes */
> > > +
> > > + if (features.vlen >= 8)
> > > + {
> > > + element_type = tdesc_named_type (feature, "uint64");
> > > + tdesc_create_vector (feature, "longs", element_type, features.vlen / 8);
> > > + }
> > > +
> > > + /* QEMU and OpenOCD include the quads width in their target descriptions, so we're
> > > + following that precedent, even if it's not particularly useful in practice, yet */
> > > +
> > > + if (features.vlen >= 16)
> > > + {
> > > + element_type = tdesc_named_type (feature, "uint128");
> > > + tdesc_create_vector (feature, "quads", element_type,
> > > + features.vlen / 16);
> > > + }
> > > +
> > > + tdesc_type_with_fields *type_with_fields;
> > > + type_with_fields = tdesc_create_union (feature, "riscv_vector");
> > > + tdesc_type *field_type;
> > > +
> > > + if (features.vlen >= 16)
> > > + {
> > > + field_type = tdesc_named_type (feature, "quads");
> > > + tdesc_add_field (type_with_fields, "q", field_type);
> > > + }
> > > + if (features.vlen >= 8)
> > > + {
> > > + field_type = tdesc_named_type (feature, "longs");
> > > + tdesc_add_field (type_with_fields, "l", field_type);
> > > + }
> > > +
> > > + /* Again, we know vlenb is >= 4, so no if guards needed for words/shorts/bytes */
> > > +
> > > + field_type = tdesc_named_type (feature, "words");
> > > + tdesc_add_field (type_with_fields, "w", field_type);
> > > +
> > > + field_type = tdesc_named_type (feature, "shorts");
> > > + tdesc_add_field (type_with_fields, "s", field_type);
> > > +
> > > + field_type = tdesc_named_type (feature, "bytes");
> > > + tdesc_add_field (type_with_fields, "b", field_type);
> > > +
> > > + /* Register vector and CSR definitions using stable magic regnums to
> > > + ensure compatibility across GDB and gdbserver builds. */
> > > + tdesc_create_reg (feature, "vstart", regnum++, 1, NULL, features.xlen * 8, "int");
> > > + tdesc_create_reg (feature, "vxsat", regnum++, 1, NULL, features.xlen * 8, "int");
> > > + tdesc_create_reg (feature, "vxrm", regnum++, 1, NULL, features.xlen * 8, "int");
> > > + tdesc_create_reg (feature, "vcsr", regnum++, 1, NULL, features.xlen * 8, "int");
> > > + tdesc_create_reg (feature, "vl", regnum++, 1, NULL, features.xlen * 8, "int");
> > > + tdesc_create_reg (feature, "vtype", regnum++, 1, NULL, features.xlen * 8, "int");
> > > + tdesc_create_reg (feature, "vlenb", regnum++, 1, NULL, features.xlen * 8, "int");
> > > +
> > > + bitsize = features.vlen * 8;
> > > + tdesc_create_reg (feature, "v0", regnum++, 1, NULL, bitsize,
> > > + "riscv_vector");
> > > + tdesc_create_reg (feature, "v1", regnum++, 1, NULL, bitsize,
> > > + "riscv_vector");
> > > + tdesc_create_reg (feature, "v2", regnum++, 1, NULL, bitsize,
> > > + "riscv_vector");
> > > + tdesc_create_reg (feature, "v3", regnum++, 1, NULL, bitsize,
> > > + "riscv_vector");
> > > + tdesc_create_reg (feature, "v4", regnum++, 1, NULL, bitsize,
> > > + "riscv_vector");
> > > + tdesc_create_reg (feature, "v5", regnum++, 1, NULL, bitsize,
> > > + "riscv_vector");
> > > + tdesc_create_reg (feature, "v6", regnum++, 1, NULL, bitsize,
> > > + "riscv_vector");
> > > + tdesc_create_reg (feature, "v7", regnum++, 1, NULL, bitsize,
> > > + "riscv_vector");
> > > + tdesc_create_reg (feature, "v8", regnum++, 1, NULL, bitsize,
> > > + "riscv_vector");
> > > + tdesc_create_reg (feature, "v9", regnum++, 1, NULL, bitsize,
> > > + "riscv_vector");
> > > + tdesc_create_reg (feature, "v10", regnum++, 1, NULL, bitsize,
> > > + "riscv_vector");
> > > + tdesc_create_reg (feature, "v11", regnum++, 1, NULL, bitsize,
> > > + "riscv_vector");
> > > + tdesc_create_reg (feature, "v12", regnum++, 1, NULL, bitsize,
> > > + "riscv_vector");
> > > + tdesc_create_reg (feature, "v13", regnum++, 1, NULL, bitsize,
> > > + "riscv_vector");
> > > + tdesc_create_reg (feature, "v14", regnum++, 1, NULL, bitsize,
> > > + "riscv_vector");
> > > + tdesc_create_reg (feature, "v15", regnum++, 1, NULL, bitsize,
> > > + "riscv_vector");
> > > + tdesc_create_reg (feature, "v16", regnum++, 1, NULL, bitsize,
> > > + "riscv_vector");
> > > + tdesc_create_reg (feature, "v17", regnum++, 1, NULL, bitsize,
> > > + "riscv_vector");
> > > + tdesc_create_reg (feature, "v18", regnum++, 1, NULL, bitsize,
> > > + "riscv_vector");
> > > + tdesc_create_reg (feature, "v19", regnum++, 1, NULL, bitsize,
> > > + "riscv_vector");
> > > + tdesc_create_reg (feature, "v20", regnum++, 1, NULL, bitsize,
> > > + "riscv_vector");
> > > + tdesc_create_reg (feature, "v21", regnum++, 1, NULL, bitsize,
> > > + "riscv_vector");
> > > + tdesc_create_reg (feature, "v22", regnum++, 1, NULL, bitsize,
> > > + "riscv_vector");
> > > + tdesc_create_reg (feature, "v23", regnum++, 1, NULL, bitsize,
> > > + "riscv_vector");
> > > + tdesc_create_reg (feature, "v24", regnum++, 1, NULL, bitsize,
> > > + "riscv_vector");
> > > + tdesc_create_reg (feature, "v25", regnum++, 1, NULL, bitsize,
> > > + "riscv_vector");
> > > + tdesc_create_reg (feature, "v26", regnum++, 1, NULL, bitsize,
> > > + "riscv_vector");
> > > + tdesc_create_reg (feature, "v27", regnum++, 1, NULL, bitsize,
> > > + "riscv_vector");
> > > + tdesc_create_reg (feature, "v28", regnum++, 1, NULL, bitsize,
> > > + "riscv_vector");
> > > + tdesc_create_reg (feature, "v29", regnum++, 1, NULL, bitsize,
> > > + "riscv_vector");
> > > + tdesc_create_reg (feature, "v30", regnum++, 1, NULL, bitsize,
> > > + "riscv_vector");
> > > + tdesc_create_reg (feature, "v31", regnum++, 1, NULL, bitsize,
> > > + "riscv_vector");
> > > +
> > > +
> > > + return regnum;
> > > +}
> > > +
> > > +
> > > #ifndef GDBSERVER
> > >
> > > /* Wrapper used by std::unordered_map to generate hash for feature set. */
> > > diff --git a/gdb/nat/riscv-linux-tdesc.c b/gdb/nat/riscv-linux-tdesc.c
> > > index 254a25ccefe..80d1ca64ba9 100644
> > > --- a/gdb/nat/riscv-linux-tdesc.c
> > > +++ b/gdb/nat/riscv-linux-tdesc.c
> > > @@ -22,14 +22,18 @@
> > > #include "elf/common.h"
> > > #include "nat/gdb_ptrace.h"
> > > #include "nat/riscv-linux-tdesc.h"
> > > +#include "gdbsupport/gdb_setjmp.h"
> > >
> > > #include <sys/uio.h>
> > > +#include <signal.h>
> > >
> > > /* Work around glibc header breakage causing ELF_NFPREG not to be usable. */
> > > #ifndef NFPREG
> > > # define NFPREG 33
> > > #endif
> > >
> > > +static unsigned long safe_read_vlenb ();
> > > +
> > > /* See nat/riscv-linux-tdesc.h. */
> > >
> > > struct riscv_gdbarch_features
> > > @@ -78,5 +82,69 @@ riscv_linux_read_features (int tid)
> > > break;
> > > }
> > >
> > > + features.vlen = safe_read_vlenb ();
> > > +
> > > return features;
> > > }
> > > +
> > > +static SIGJMP_BUF sigill_guard_jmp_buf;
> > > +
> > > +static void
> > > +sigill_guard (int sig)
> > > +{
> > > + /* this will gets us back to caller deeper in the call stack, with an indication that
> > > + an illegal instruction condition was encountered */
> > > + SIGLONGJMP (sigill_guard_jmp_buf, -1);
> > > +
> > > + /* control won't get here */
> > > +}
> > > +
> > > +
> > > +
> > > +static unsigned long
> > > +safe_read_vlenb ()
> > > +{
> > > + /* Surrounding the attempt here to read VLENB CSR to have a signal handler set up
> > > + to trap illegal instruction condition (SIGILL), and if a trap happens during this call,
> > > + get control back within this function and return 0 in that case.
> > > + */
> > > + unsigned long vlenb = 0;
> > > + struct sigaction our_action = { 0 };
> > > + struct sigaction original_action;
> > > + int sysresult;
> > > +
> > > +
> > > + our_action.sa_handler = sigill_guard;
> > > +
> > > + sysresult = sigaction (SIGILL, &our_action, &original_action);
> > > + if (sysresult != 0)
> > > + {
> > > + perror
> > > + ("Error installing temporary SIGILL handler in safe_read_vlenb()");
> > > + }
> > > +
> > > + if (SIGSETJMP (sigill_guard_jmp_buf, 1) == 0)
> > > + {
> > > + asm ("csrr %0, vlenb":"=r" (vlenb));
> > > + }
> > > + else
> > > + {
> > > + /* Must've generated an illegal instruction condition; we'll figure this means
> > > + no vector unit is present */
> > > + vlenb = 0;
> > > + }
> > > +
> > > +
> > > + if (sysresult == 0)
> > > + {
> > > + /* re-install former handler */
> > > + sysresult = sigaction (SIGILL, &original_action, NULL);
> > > + if (sysresult != 0)
> > > + {
> > > + perror
> > > + ("Error re-installing original SIGILL handler in safe_read_vlenb()");
> > > + }
> > > +
> > > + }
> > > + return vlenb;
> > > +}
> > > diff --git a/gdb/nat/riscv-linux-tdesc.h b/gdb/nat/riscv-linux-tdesc.h
> > > index de10d91caae..76f8d2f0cdd 100644
> > > --- a/gdb/nat/riscv-linux-tdesc.h
> > > +++ b/gdb/nat/riscv-linux-tdesc.h
> > > @@ -20,9 +20,33 @@
> > > #define GDB_NAT_RISCV_LINUX_TDESC_H
> > >
> > > #include "arch/riscv.h"
> > > +#include "asm/ptrace.h"
> > >
> > > /* Determine XLEN and FLEN for the LWP identified by TID, and return a
> > > corresponding features object. */
> > > struct riscv_gdbarch_features riscv_linux_read_features (int tid);
> > >
> > > +#define RISCV_MAX_VLENB (8192)
> > > +
> > > +/* Some branches and/or commits of linux kernel named this "struct __riscv_v_state",
> > > + and later it was changed to "struct __riscv_v_ext_state",
> > > + so using a macro to stand-in for that struct type to make it easier to modify
> > > + in a single place, if compiling against one of those older Linux kernel commits */
> > > +#ifndef RISCV_VECTOR_STATE_T
> > > +#define RISCV_VECTOR_STATE_T struct __riscv_v_ext_state
> > > +#endif
> > > +
> > > +/* Struct for use in ptrace() calls for vector CSRs/registers */
> > > +struct __riscv_vregs
> > > +{
> > > + RISCV_VECTOR_STATE_T vstate;
> > > + gdb_byte data[RISCV_MAX_VLENB * 32]; /* data will arrive packed, VLENB bytes per element, not necessarily RISCV_MAX_VLENB bytes per element */
> > > +};
> > > +
> > > +#define VCSR_MASK_VXSAT 0x1
> > > +#define VCSR_POS_VXSAT 0
> > > +#define VCSR_MASK_VXRM 0x3
> > > +#define VCSR_POS_VXRM 1
> > > +
> > > +
> > > #endif /* GDB_NAT_RISCV_LINUX_TDESC_H */
> > > diff --git a/gdb/riscv-linux-nat.c b/gdb/riscv-linux-nat.c
> > > index 8846329afc6..a8dcc1e637a 100644
> > > --- a/gdb/riscv-linux-nat.c
> > > +++ b/gdb/riscv-linux-nat.c
> > > @@ -21,6 +21,7 @@
> > > #include "linux-nat.h"
> > > #include "riscv-tdep.h"
> > > #include "inferior.h"
> > > +#include "regset.h"
> > >
> > > #include "elf/common.h"
> > >
> > > @@ -124,6 +125,113 @@ supply_fpregset_regnum (struct regcache *regcache, const prfpregset_t *fpregs,
> > > }
> > > }
> > >
> > > +#define MEMBER_SIZE(type, member) sizeof(((type *) 0)->member)
> > > +
> > > +static const regcache_map_entry riscv_linux_vregmap[] =
> > > +{
> > > + { 1, RISCV_CSR_VSTART_REGNUM, MEMBER_SIZE(struct __riscv_vregs, vstate.vstart) },
> > > + { 1, RISCV_CSR_VL_REGNUM, MEMBER_SIZE(struct __riscv_vregs, vstate.vl) },
> > > + { 1, RISCV_CSR_VTYPE_REGNUM, MEMBER_SIZE(struct __riscv_vregs, vstate.vtype) },
> > > + { 1, RISCV_CSR_VCSR_REGNUM, MEMBER_SIZE(struct __riscv_vregs, vstate.vcsr) },
> > > + /* struct __riscv_vregs member "datap" is a pointer that doesn't correspond
> > > + to a register value. In the context of ptrace(), member is always zero,
> > > + with V0..V31 values inline after that. So, skipping datap */
> > > + { 1, REGCACHE_MAP_SKIP, MEMBER_SIZE(struct __riscv_vregs, vstate.datap) },
> > > + /* Here's V0..V31. Specifying 0 as size leads to a call to register_size()
> > > + for size determination */
> > > + { 32, RISCV_V0_REGNUM, 0 },
> > > + { 0 }, /* count==0 represents termination of entries */
> > > +};
> > > +
> > > +/* Define the vector register regset. */
> > > +
> > > +static const struct regset riscv_linux_vregset =
> > > +{
> > > + riscv_linux_vregmap,
> > > + regcache_supply_regset /* Other RISC-V regsets use riscv_supply_regset here; not sure that'd be correct for this case */,
> > > + regcache_collect_regset
> > > +};
> > > +
> > > +
> > > +/* Supply RISC-V vector register values (including inferred CSRs) to the GDB regcache. */
> > > +
> > > +static void
> > > +supply_vregset_regnum (struct regcache *regcache,
> > > + const struct __riscv_vregs *vregs, int regnum)
> > > +{
> > > + const gdb_byte *buf;
> > > + int vlenb = register_size (regcache->arch (), RISCV_V0_REGNUM);
> > > +
> > > + regcache_supply_regset (&riscv_linux_vregset, regcache, regnum, vregs, sizeof(*vregs));
> > > +
> > > + if (regnum == -1 || regnum == RISCV_CSR_VLENB_REGNUM)
> > > + {
> > > + /* we already have a local copy above, use that (widened for XLEN padding) */
> > > + uint64_t xlen_safe_vlenb = vlenb;
> > > + buf = (gdb_byte *) & xlen_safe_vlenb;
> > > + regcache->raw_supply (RISCV_CSR_VLENB_REGNUM, buf);
> > > + }
> > > +
> > > + if (regnum == -1 || regnum == RISCV_CSR_VXSAT_REGNUM)
> > > + {
> > > + /* this CSR is not part of vregs->vstate literally, but we can infer a value from vcsr */
> > > + uint64_t vxsat = ((vregs->vstate.vcsr >> VCSR_POS_VXSAT) & VCSR_MASK_VXSAT);
> > > + buf = (gdb_byte *) & vxsat;
> > > + regcache->raw_supply (RISCV_CSR_VXSAT_REGNUM, buf);
> > > + }
> > > +
> > > + if (regnum == -1 || regnum == RISCV_CSR_VXRM_REGNUM)
> > > + {
> > > + /* this CSR is not part of vregs->vstate literally, but we can infer a value from vcsr */
> > > + uint64_t vxrm = ((vregs->vstate.vcsr >> VCSR_POS_VXRM) & VCSR_MASK_VXRM);
> > > + buf = (gdb_byte *) & vxrm;
> > > + regcache->raw_supply (RISCV_CSR_VXRM_REGNUM, buf);
> > > + }
> > > +}
> > > +
> > > +/* Collect RISC-V vector register values (including inferred CSRs) from the GDB regcache. */
> > > +static void
> > > +fill_vregset (const struct regcache *regcache, struct __riscv_vregs *vregs,
> > > + int regnum)
> > > +{
> > > + regcache_collect_regset (&riscv_linux_vregset, regcache, regnum, vregs, sizeof(*vregs));
> > > +
> > > + if (regnum == -1 || regnum == RISCV_CSR_VCSR_REGNUM || regnum == RISCV_CSR_VXSAT_REGNUM
> > > + || regnum == RISCV_CSR_VXRM_REGNUM)
> > > + {
> > > + uint64_t vxsat_from_regcache;
> > > + uint64_t vxrm_from_regcache;
> > > +
> > > + if ( ! (regnum == -1 || regnum == RISCV_CSR_VCSR_REGNUM) )
> > > + {
> > > + /* We don't already have the VCSR value, from the earlier regcache_collect_regset call, so let's get it now. */
> > > + regcache_collect_regset (&riscv_linux_vregset, regcache, RISCV_CSR_VCSR_REGNUM, vregs, sizeof(*vregs));
> > > + }
> > > +
> > > + if (regnum == RISCV_CSR_VXSAT_REGNUM)
> > > + {
> > > + /* Overwrite VCSR with the VXSAT bit here. */
> > > + gdb_byte *buf = (gdb_byte *) &vxsat_from_regcache;
> > > + regcache->raw_collect (RISCV_CSR_VXSAT_REGNUM, buf);
> > > + vregs->vstate.vcsr &= ~((uint64_t) VCSR_MASK_VXSAT << VCSR_POS_VXSAT);
> > > + vregs->vstate.vcsr |= ((vxsat_from_regcache & VCSR_MASK_VXSAT) << VCSR_POS_VXSAT);
> > > + }
> > > +
> > > + if (regnum == RISCV_CSR_VXRM_REGNUM)
> > > + {
> > > + /* Overwrite VCSR with the VXRM bit here. */
> > > + gdb_byte *buf = (gdb_byte *) &vxsat_from_regcache;
> > > + regcache->raw_collect (RISCV_CSR_VXRM_REGNUM, buf);
> > > + vregs->vstate.vcsr &= ~((uint64_t) VCSR_MASK_VXRM << VCSR_POS_VXRM);
> > > + vregs->vstate.vcsr |= ((vxrm_from_regcache & VCSR_MASK_VXRM) << VCSR_POS_VXRM);
> > > + }
> > > + }
> > > +
> > > + /* VLENB register is not writable, so that's why nothing is collected here for that register. */
> > > +
> > > +}
> > > +
> > > +
> > > /* Copy all floating point registers from regset FPREGS into REGCACHE. */
> > >
> > > void
> > > @@ -254,6 +362,31 @@ riscv_linux_nat_target::fetch_registers (struct regcache *regcache, int regnum)
> > > supply_fpregset_regnum (regcache, ®s, regnum);
> > > }
> > >
> > > + /* if Linux kernel was not configured to support RISC-V vectors, then
> > > + the ptrace call will return -1, and we just won't get vector registers,
> > > + but in that case it wouldn't be an error that needs user attention.
> > > + */
> > > + if ((regnum >= RISCV_V0_REGNUM && regnum <= RISCV_V31_REGNUM)
> > > + || (regnum == RISCV_CSR_VSTART_REGNUM)
> > > + || (regnum == RISCV_CSR_VL_REGNUM)
> > > + || (regnum == RISCV_CSR_VTYPE_REGNUM)
> > > + || (regnum == RISCV_CSR_VCSR_REGNUM)
> > > + || (regnum == RISCV_CSR_VLENB_REGNUM)
> > > + || (regnum == RISCV_CSR_VXSAT_REGNUM)
> > > + || (regnum == RISCV_CSR_VXRM_REGNUM)
> > > + || (regnum == -1))
> > > + {
> > > + struct iovec iov;
> > > + struct __riscv_vregs vregs;
> > > +
> > > + iov.iov_base = &vregs;
> > > + iov.iov_len = sizeof (vregs);
> > > +
> > > + if (ptrace (PTRACE_GETREGSET, tid, NT_RISCV_VECTOR,
> > > + (PTRACE_TYPE_ARG3) & iov) == 0)
> > > + supply_vregset_regnum (regcache, &vregs, regnum);
> > > + }
> > > +
> > > if ((regnum == RISCV_CSR_MISA_REGNUM)
> > > || (regnum == -1))
> > > {
> > > @@ -323,6 +456,35 @@ riscv_linux_nat_target::store_registers (struct regcache *regcache, int regnum)
> > > }
> > > }
> > >
> > > + /* VLENB isn't writable, so we'll skip considering that one, if it's being
> > > + specified alone */
> > > + if ((regnum >= RISCV_V0_REGNUM && regnum <= RISCV_V31_REGNUM)
> > > + || (regnum == RISCV_CSR_VSTART_REGNUM)
> > > + || (regnum == RISCV_CSR_VL_REGNUM)
> > > + || (regnum == RISCV_CSR_VTYPE_REGNUM)
> > > + || (regnum == RISCV_CSR_VCSR_REGNUM)
> > > + || (regnum == RISCV_CSR_VXSAT_REGNUM)
> > > + || (regnum == RISCV_CSR_VXRM_REGNUM)
> > > + || (regnum == -1))
> > > + {
> > > + struct iovec iov;
> > > + struct __riscv_vregs vregs;
> > > +
> > > + iov.iov_base = &vregs;
> > > + iov.iov_len = sizeof (vregs);
> > > +
> > > + if (ptrace (PTRACE_GETREGSET, tid, NT_RISCV_VECTOR,
> > > + (PTRACE_TYPE_ARG3) & iov) == 0)
> > > + {
> > > + fill_vregset (regcache, &vregs, regnum);
> > > +
> > > + if (ptrace (PTRACE_SETREGSET, tid, NT_RISCV_VECTOR,
> > > + (PTRACE_TYPE_ARG3) & iov) == -1)
> > > + perror_with_name (_("Couldn't set vector registers"));
> > > + }
> > > + }
> > > +
> > > +
> > > /* Access to CSRs has potential security issues, don't support them for
> > > now. */
> > > }
> > > diff --git a/gdb/riscv-linux-tdep.c b/gdb/riscv-linux-tdep.c
> > > index e1ea6158a45..e9531094de5 100644
> > > --- a/gdb/riscv-linux-tdep.c
> > > +++ b/gdb/riscv-linux-tdep.c
> > > @@ -38,6 +38,10 @@ extern unsigned int record_debug;
> > >
> > > #define RISCV_NR_rt_sigreturn 139
> > >
> > > +/* Magic number written to the head.magic field of struct __sc_riscv_v_state that kernel
> > > + places in the reserved area of struct sigcontext. Comes from <asm/sigcontext.h> */
> > > +#define RVV_MAGIC 0x53465457
> > > +
> > > /* Define the general register mapping. The kernel puts the PC at offset 0,
> > > gdb puts it at offset 32. Register x0 is always 0 and can be ignored.
> > > Registers x1 to x31 are in the same place. */
> > > @@ -126,8 +130,123 @@ static const struct tramp_frame riscv_linux_sigframe = {
> > > mcontext_t uc_mcontext;
> > > }; */
> > >
> > > +
> > > +/* Read RVV magic and size fields from address REGS_BASE and return true if a valid
> > > + RISC-V vector context header is found, otherwise return false. THIS_FRAME is used
> > > + for the architecture and byte-order when reading memory. VLEN and XLEN are the
> > > + v-register and x-register sizes (in bytes) and are used for validation. */
> > > +
> > > +static bool
> > > +riscv_linux_vector_sigframe_header_check (frame_info_ptr this_frame,
> > > + int vlen, int xlen,
> > > + CORE_ADDR regs_base)
> > > +{
> > > + uint32_t rvv_magic;
> > > + uint32_t rvv_size;
> > > + bool info_good = false;
> > > +
> > > + /* If vector information is available, then we should see this structure at this address:
> > > + struct __riscv_ctx_hdr {
> > > + __u32 magic; (RVV_MAGIC).
> > > + __u32 size; (size of struct __sc_riscv_v_state + vector register data size (32*VLENB))
> > > + } head;
> > > + */
> > > +
> > > + rvv_magic =
> > > + get_frame_memory_unsigned (this_frame, regs_base, sizeof (rvv_magic));
> > > + regs_base += sizeof (rvv_magic);
> > > + rvv_size =
> > > + get_frame_memory_unsigned (this_frame, regs_base, sizeof (rvv_magic));
> > > + regs_base += sizeof (rvv_size);
> > > +
> > > +
> > > + info_good = (rvv_magic == RVV_MAGIC);
> > > + if (!info_good)
> > > + {
> > > + /* Not an error, because kernels can be configured without CONFIG_VECTOR, but worth noting if frame debug
> > > + setting is turned on */
> > > + frame_debug_printf
> > > + ("Did not find RISC-V vector information in ucontext (kernel not built with CONFIG_VECTOR?)");
> > > +
> > > + return false;
> > > + }
> > > +
> > > + if (frame_debug)
> > > + {
> > > + uint32_t expected_rvv_size;
> > > +
> > > + frame_debug_printf
> > > + ("Located RISC-V vector information in signal frame ucontext (info size %u)",
> > > + rvv_size);
> > > +
> > > + /* sanity check the reported size; should be sizeof(uint32_t) + sizeof(uint32_t) + 5 * XLENB + 32 * vlen */
> > > + expected_rvv_size = sizeof (uint32_t) /* magic */ +
> > > + sizeof (uint32_t) /* size */ +
> > > + 5 * xlen /* vstart, vl, vtype, vcsr, and datap */ +
> > > + 32 * vlen; /* v0..v31 values */
> > > +
> > > + if (rvv_size != expected_rvv_size)
> > > + {
> > > + warning (_("Size in RISC-V vector information header in ucontext (%u) differs from expected size (%u)."),
> > > + rvv_size, expected_rvv_size);
> > > +
> > > + /* Additional debug details if frame_debug is on. */
> > > + frame_debug_printf ("Detailed size mismatch: expected %u based on VLEN=%d and XLEN=%d",
> > > + expected_rvv_size, vlen, xlen);
> > > + }
> > > + }
> > > +
> > > + return info_good;
> > > +}
> > > +
> > > +static CORE_ADDR
> > > +riscv_linux_sigframe_vector_init (frame_info_ptr this_frame,
> > > + struct trad_frame_cache *this_cache,
> > > + CORE_ADDR regs_base, int xlen, int vlen)
> > > +{
> > > + int vfieldidx;
> > > + CORE_ADDR p_datap;
> > > + CORE_ADDR datap;
> > > +
> > > + /* vstart, vl, vtype, vcsr, and datap are XLEN sized fields (unsigned long) from this point. */
> > > + vfieldidx = 0;
> > > + trad_frame_set_reg_addr (this_cache, RISCV_CSR_VSTART_REGNUM,
> > > + regs_base + (vfieldidx * xlen));
> > > + vfieldidx++;
> > > + trad_frame_set_reg_addr (this_cache, RISCV_CSR_VL_REGNUM,
> > > + regs_base + (vfieldidx * xlen));
> > > +
> > > + vfieldidx++;
> > > + trad_frame_set_reg_addr (this_cache, RISCV_CSR_VTYPE_REGNUM,
> > > + regs_base + (vfieldidx * xlen));
> > > +
> > > + vfieldidx++;
> > > + trad_frame_set_reg_addr (this_cache, RISCV_CSR_VCSR_REGNUM,
> > > + regs_base + (vfieldidx * xlen));
> > > +
> > > + /* for the datap member, there is one level of memory indirection to get the address of
> > > + the block of values for v0..v31 */
> > > + vfieldidx++;
> > > + p_datap = regs_base + (vfieldidx * xlen);
> > > + datap = get_frame_memory_unsigned (this_frame, p_datap, xlen);
> > > + regs_base = datap;
> > > + for (int i = 0; i < 32; i++)
> > > + {
> > > + trad_frame_set_reg_addr (this_cache, RISCV_V0_REGNUM + i,
> > > + regs_base + (i * vlen));
> > > + }
> > > + regs_base += 32 * vlen;
> > > +
> > > + return regs_base;
> > > +}
> > > +
> > > +
> > > #define SIGFRAME_SIGINFO_SIZE 128
> > > #define UCONTEXT_MCONTEXT_OFFSET 176
> > > +#define MCONTEXT_VECTOR_OFFSET 784 /* offset of struct mcontext's __reserved field,
> > > + which is where the struct __sc_riscv_v_state is overlaid */
> > > +#define RISCV_CONTEXT_HEADER_SIZE 8 /* size of struct __riscv_ctx_hdr {__u32 magic; __u32 size; } */
> > > +
> > >
> > > static void
> > > riscv_linux_sigframe_init (const struct tramp_frame *self,
> > > @@ -138,6 +257,7 @@ riscv_linux_sigframe_init (const struct tramp_frame *self,
> > > struct gdbarch *gdbarch = get_frame_arch (this_frame);
> > > int xlen = riscv_isa_xlen (gdbarch);
> > > int flen = riscv_isa_flen (gdbarch);
> > > + int vlen = riscv_isa_vlen (gdbarch);
> > > CORE_ADDR frame_sp = get_frame_sp (this_frame);
> > > CORE_ADDR mcontext_base;
> > > CORE_ADDR regs_base;
> > > @@ -161,6 +281,19 @@ riscv_linux_sigframe_init (const struct tramp_frame *self,
> > > regs_base += 32 * flen;
> > > trad_frame_set_reg_addr (this_cache, RISCV_CSR_FCSR_REGNUM, regs_base);
> > >
> > > + /* Handle the vector registers, if present. */
> > > + if (vlen > 0)
> > > + {
> > > + regs_base = mcontext_base + MCONTEXT_VECTOR_OFFSET;
> > > + if (riscv_linux_vector_sigframe_header_check
> > > + (this_frame, vlen, xlen, regs_base))
> > > + {
> > > + regs_base += RISCV_CONTEXT_HEADER_SIZE; /* advance past the header */
> > > + riscv_linux_sigframe_vector_init (this_frame, this_cache, regs_base,
> > > + xlen, vlen);
> > > + }
> > > + }
> > > +
> > > /* Choice of the bottom of the sigframe is somewhat arbitrary. */
> > > trad_frame_set_id (this_cache, frame_id_build (frame_sp, func));
> > > }
> > > diff --git a/gdb/riscv-tdep.c b/gdb/riscv-tdep.c
> > > index a735c095b0d..f61a3429b70 100644
> > > --- a/gdb/riscv-tdep.c
> > > +++ b/gdb/riscv-tdep.c
> > > @@ -47,6 +47,7 @@
> > > #include "remote.h"
> > > #include "target-descriptions.h"
> > > #include "dwarf2/frame.h"
> > > +#include "dwarf2/expr.h"
> > > #include "user-regs.h"
> > > #include "valprint.h"
> > > #include "opcode/riscv-opc.h"
> > > @@ -653,6 +654,14 @@ struct riscv_vector_feature : public riscv_register_feature
> > > { RISCV_V0_REGNUM + 29, { "v29" } },
> > > { RISCV_V0_REGNUM + 30, { "v30" } },
> > > { RISCV_V0_REGNUM + 31, { "v31" } },
> > > + /* vector CSRs */
> > > + { RISCV_CSR_VSTART_REGNUM, { "vstart" } },
> > > + { RISCV_CSR_VXSAT_REGNUM, { "vxsat" } },
> > > + { RISCV_CSR_VXRM_REGNUM, { "vxrm" } },
> > > + { RISCV_CSR_VL_REGNUM, { "vl" } },
> > > + { RISCV_CSR_VTYPE_REGNUM, { "vtype" } },
> > > + { RISCV_CSR_VCSR_REGNUM, { "vcsr" } },
> > > + { RISCV_CSR_VLENB_REGNUM, { "vlenb" } },
> > > };
> > > }
> > >
> > > @@ -684,10 +693,16 @@ struct riscv_vector_feature : public riscv_register_feature
> > > return true;
> > > }
> > >
> > > - /* Check all of the vector registers are present. */
> > > + /* Check all of the vector registers are present. We also
> > > + check that the vector CSRs are present too, though if these
> > > + are missing this is not fatal. */
> > > for (const auto ® : m_registers)
> > > {
> > > - if (!reg.check (tdesc_data, feature_vector, aliases))
> > > + bool found = reg.check (tdesc_data, feature_vector, aliases);
> > > +
> > > + bool is_ctrl_reg_p = !(reg.regnum >= RISCV_V0_REGNUM && reg.regnum <= RISCV_V31_REGNUM);
> > > +
> > > + if (!found && !is_ctrl_reg_p)
> > > return false;
> > > }
> > >
> > > @@ -697,6 +712,12 @@ struct riscv_vector_feature : public riscv_register_feature
> > > int vector_bitsize = -1;
> > > for (const auto ® : m_registers)
> > > {
> > > +
> > > + bool is_ctrl_reg_p = !(reg.regnum >= RISCV_V0_REGNUM && reg.regnum <= RISCV_V31_REGNUM);
> > > +
> > > + if (is_ctrl_reg_p)
> > > + continue;
> > > +
> > > int reg_bitsize = -1;
> > > for (const char *name : reg.names)
> > > {
> > > @@ -819,6 +840,16 @@ riscv_abi_embedded (struct gdbarch *gdbarch)
> > > return tdep->abi_features.embedded;
> > > }
> > >
> > > +/* See riscv-tdep.h. */
> > > +
> > > +int
> > > +riscv_isa_vlen (struct gdbarch *gdbarch)
> > > +{
> > > + riscv_gdbarch_tdep *tdep = gdbarch_tdep<riscv_gdbarch_tdep> (gdbarch);
> > > + return tdep->isa_features.vlen;
> > > +}
> > > +
> > > +
> > > /* Return true if the target for GDBARCH has floating point hardware. */
> > >
> > > static bool
> > > @@ -1470,7 +1501,19 @@ riscv_register_reggroup_p (struct gdbarch *gdbarch, int regnum,
> > > return 0;
> > > }
> > > else if (reggroup == vector_reggroup)
> > > - return (regnum >= RISCV_V0_REGNUM && regnum <= RISCV_V31_REGNUM);
> > > + {
> > > + if (regnum >= RISCV_V0_REGNUM && regnum <= RISCV_V31_REGNUM)
> > > + return 1;
> > > + if (regnum == RISCV_CSR_VSTART_REGNUM
> > > + || regnum == RISCV_CSR_VXSAT_REGNUM
> > > + || regnum == RISCV_CSR_VXRM_REGNUM
> > > + || regnum == RISCV_CSR_VL_REGNUM
> > > + || regnum == RISCV_CSR_VTYPE_REGNUM
> > > + || regnum == RISCV_CSR_VCSR_REGNUM
> > > + || regnum == RISCV_CSR_VLENB_REGNUM)
> > > + return 1;
> > > + return 0;
> > > + }
> > > else
> > > return 0;
> > > }
> > > diff --git a/gdb/riscv-tdep.h b/gdb/riscv-tdep.h
> > > index 2903aefd007..82213f820f3 100644
> > > --- a/gdb/riscv-tdep.h
> > > +++ b/gdb/riscv-tdep.h
> > > @@ -50,6 +50,7 @@ enum
> > > RISCV_LAST_FP_REGNUM = 64, /* Last Floating Point Register */
> > >
> > > RISCV_FIRST_CSR_REGNUM = 65, /* First CSR */
> > > +
> > > #define DECLARE_CSR(name, num, class, define_version, abort_version) \
> > > RISCV_ ## num ## _REGNUM = RISCV_FIRST_CSR_REGNUM + num,
> > > #include "opcode/riscv-opc.h"
> > > @@ -158,6 +159,11 @@ extern int riscv_abi_flen (struct gdbarch *gdbarch);
> > > argument registers. */
> > > extern bool riscv_abi_embedded (struct gdbarch *gdbarch);
> > >
> > > +/* Return the width in bytes of the hardware vector registers for
> > > + GDBARCH. If this architecture has no vector registers, then
> > > + return 0. */
> > > +extern int riscv_isa_vlen (struct gdbarch *gdbarch);
> > > +
> > > /* Single step based on where the current instruction will take us. */
> > > extern std::vector<CORE_ADDR> riscv_software_single_step
> > > (struct regcache *regcache);
> > > diff --git a/gdbserver/linux-riscv-low.cc b/gdbserver/linux-riscv-low.cc
> > > index 8c742f406a2..face971a5e7 100644
> > > --- a/gdbserver/linux-riscv-low.cc
> > > +++ b/gdbserver/linux-riscv-low.cc
> > > @@ -161,6 +161,113 @@ riscv_store_fpregset (struct regcache *regcache, const void *buf)
> > > supply_register_by_name (regcache, "fcsr", regbuf);
> > > }
> > >
> > > +/* Collect vector registers from REGCACHE into BUF. */
> > > +
> > > +static void
> > > +riscv_fill_vregset (struct regcache *regcache, void *buf)
> > > +{
> > > + const struct target_desc *tdesc = regcache->tdesc;
> > > + int regno = find_regno (tdesc, "v0");
> > > + int vlenb = register_size (regcache->tdesc, regno);
> > > + uint64_t u64_vlenb = vlenb; /* pad to max XLEN for buffer conversion */
> > > + uint64_t u64_vxsat = 0;
> > > + uint64_t u64_vxrm = 0;
> > > + uint64_t u64_vcsr = 0;
> > > + gdb_byte *regbuf;
> > > + int i;
> > > +
> > > + /* Since vxsat and equivalent bits in vcsr are aliases (and same for vxrm), we have a dilemma.
> > > + For this gdb -> gdbserver topology, if the aliased pairs have values that disagree, then
> > > + which value should take precedence? We don't know which alias was most
> > > + recently assigned. We're just getting a block of register values including vxsat, vxrm,
> > > + and vcsr. We have to impose some kind of rule for predictable resolution to resolve any inconsistency.
> > > + For now, let's say that vxsat and vxrm take precedence, and those values will be applied to the
> > > + corresponding fields in vcsr. Reconcile these 3 interdependent registers now:
> > > + */
> > > + regbuf = (gdb_byte *) & u64_vcsr;
> > > + collect_register_by_name (regcache, "vcsr", regbuf);
> > > + regbuf = (gdb_byte *) & u64_vxsat;
> > > + collect_register_by_name (regcache, "vxsat", regbuf);
> > > + regbuf = (gdb_byte *) & u64_vxrm;
> > > + collect_register_by_name (regcache, "vxrm", regbuf);
> > > +
> > > + u64_vcsr &= ~((uint64_t)VCSR_MASK_VXSAT << VCSR_POS_VXSAT);
> > > + u64_vcsr |= ((u64_vxsat & VCSR_MASK_VXSAT) << VCSR_POS_VXSAT);
> > > + u64_vcsr &= ~((uint64_t)VCSR_MASK_VXRM << VCSR_POS_VXRM);
> > > + u64_vcsr |= ((u64_vxrm & VCSR_MASK_VXRM) << VCSR_POS_VXRM);
> > > +
> > > + /* Replace the original vcsr value with the "cooked" value */
> > > + regbuf = (gdb_byte *) & u64_vcsr;
> > > + supply_register_by_name (regcache, "vcsr", regbuf);
> > > +
> > > + /* Now stage the ptrace buffer (it'll receive the cooked vcsr value) */
> > > +
> > > + regbuf = (gdb_byte *) buf + offsetof (struct __riscv_vregs, vstate.vstart);
> > > + collect_register_by_name (regcache, "vstart", regbuf);
> > > + regbuf = (gdb_byte *) buf + offsetof (struct __riscv_vregs, vstate.vl);
> > > + collect_register_by_name (regcache, "vl", regbuf);
> > > + regbuf = (gdb_byte *) buf + offsetof (struct __riscv_vregs, vstate.vtype);
> > > + collect_register_by_name (regcache, "vtype", regbuf);
> > > + regbuf = (gdb_byte *) buf + offsetof (struct __riscv_vregs, vstate.vcsr);
> > > + collect_register_by_name (regcache, "vcsr", regbuf);
> > > + regbuf = (gdb_byte *) & u64_vlenb;
> > > + collect_register_by_name (regcache, "vlenb", regbuf);
> > > +
> > > +
> > > + regbuf = (gdb_byte *) buf + offsetof (struct __riscv_vregs, data);
> > > + for (i = 0; i < 32; i++, regbuf += vlenb)
> > > + collect_register (regcache, regno + i, regbuf);
> > > +}
> > > +
> > > +/* Supply vector registers from BUF into REGCACHE. */
> > > +
> > > +static void
> > > +riscv_store_vregset (struct regcache *regcache, const void *buf)
> > > +{
> > > + const struct target_desc *tdesc = regcache->tdesc;
> > > + int regno = find_regno (tdesc, "v0");
> > > + int vlenb = register_size (regcache->tdesc, regno);
> > > + uint64_t u64_vlenb = vlenb; /* pad to max XLEN for buffer conversion */
> > > + uint64_t vcsr;
> > > + uint64_t vxsat;
> > > + uint64_t vxrm;
> > > + const gdb_byte *regbuf;
> > > + int i;
> > > +
> > > + regbuf =
> > > + (const gdb_byte *) buf + offsetof (struct __riscv_vregs, vstate.vstart);
> > > + supply_register_by_name (regcache, "vstart", regbuf);
> > > + regbuf =
> > > + (const gdb_byte *) buf + offsetof (struct __riscv_vregs, vstate.vl);
> > > + supply_register_by_name (regcache, "vl", regbuf);
> > > + regbuf =
> > > + (const gdb_byte *) buf + offsetof (struct __riscv_vregs, vstate.vtype);
> > > + supply_register_by_name (regcache, "vtype", regbuf);
> > > + regbuf =
> > > + (const gdb_byte *) buf + offsetof (struct __riscv_vregs, vstate.vcsr);
> > > + supply_register_by_name (regcache, "vcsr", regbuf);
> > > + /* also store off a non-byte-wise copy of vcsr, to derive values for vxsat and vxrm */
> > > + vcsr = *(uint64_t*)regbuf;
> > > + /* vlenb isn't part of vstate, but we have already inferred its value by running code on this
> > > + hart, and we're assuming homogeneous VLENB if it's an SMP system */
> > > + regbuf = (gdb_byte *) & u64_vlenb;
> > > + supply_register_by_name (regcache, "vlenb", regbuf);
> > > +
> > > + /* vxsat and vxrm, are not part of vstate, so we have to extract from VCSR
> > > + value */
> > > + vxsat = ((vcsr >> VCSR_POS_VXSAT) & VCSR_MASK_VXSAT);
> > > + regbuf = (gdb_byte *) &vxsat;
> > > + supply_register_by_name (regcache, "vxsat", regbuf);
> > > + vxrm = ((vcsr >> VCSR_POS_VXRM) & VCSR_MASK_VXRM);
> > > + regbuf = (gdb_byte *) &vxrm;
> > > + supply_register_by_name (regcache, "vxrm", regbuf);
> > > +
> > > + /* v0..v31 */
> > > + regbuf = (const gdb_byte *) buf + offsetof (struct __riscv_vregs, data);
> > > + for (i = 0; i < 32; i++, regbuf += vlenb)
> > > + supply_register (regcache, regno + i, regbuf);
> > > +}
> > > +
> > > /* RISC-V/Linux regsets. FPRs are optional and come in different sizes,
> > > so define multiple regsets for them marking them all as OPTIONAL_REGS
> > > rather than FP_REGS, so that "regsets_fetch_inferior_registers" picks
> > > @@ -178,6 +285,9 @@ static struct regset_info riscv_regsets[] = {
> > > { PTRACE_GETREGSET, PTRACE_SETREGSET, NT_FPREGSET,
> > > sizeof (struct __riscv_mc_f_ext_state), OPTIONAL_REGS,
> > > riscv_fill_fpregset, riscv_store_fpregset },
> > > + { PTRACE_GETREGSET, PTRACE_SETREGSET, NT_RISCV_VECTOR,
> > > + sizeof (struct __riscv_vregs), OPTIONAL_REGS,
> > > + riscv_fill_vregset, riscv_store_vregset },
> > > NULL_REGSET
> > > };
> > >
> > > diff --git a/include/elf/common.h b/include/elf/common.h
> > > index fd032d1e03e..7003f987b94 100644
> > > --- a/include/elf/common.h
> > > +++ b/include/elf/common.h
> > > @@ -758,6 +758,7 @@
> > > /* note name must be "LINUX". */
> > > #define NT_RISCV_CSR 0x900 /* RISC-V Control and Status Registers */
> > > /* note name must be "LINUX". */
> > > +#define NT_RISCV_VECTOR 0x901 /* RISC-V Vector Registers. */
> > > #define NT_SIGINFO 0x53494749 /* Fields of siginfo_t. */
> > > #define NT_FILE 0x46494c45 /* Description of mapped files. */
> > >
> > > --
> > > 2.43.0
> > >
next prev parent reply other threads:[~2025-06-17 23:44 UTC|newest]
Thread overview: 6+ messages / expand[flat|nested] mbox.gz Atom feed top
2025-05-07 11:57 Sameer Natu
2025-05-07 21:16 ` Charlie Jenkins
2025-05-15 17:50 ` Charlie Jenkins
2025-06-17 23:43 ` Charlie Jenkins [this message]
2025-06-18 15:28 ` Andrew Burgess
2025-06-19 17:27 ` Andrew Burgess
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=aFH9kyDGSwMrRo1w@ghost \
--to=charlie@rivosinc.com \
--cc=aburgess@redhat.com \
--cc=gdb-patches@sourceware.org \
--cc=snatu@whileone.in \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox