From: "Theodore A. Roth" <troth@openavr.org>
To: Andrew Cagney <ac131313@redhat.com>
Cc: gdb-patches@sources.redhat.com
Subject: Re: [RFC/RFA] fix calculation of sizeof_g_packet
Date: Tue, 03 Jun 2003 23:13:00 -0000 [thread overview]
Message-ID: <Pine.LNX.4.53.0306031539250.17269@knuth.amplepower.com> (raw)
In-Reply-To: <3EDD1FA3.9020306@redhat.com>
[-- Attachment #1: Type: TEXT/PLAIN, Size: 1351 bytes --]
On Tue, 3 Jun 2003, Andrew Cagney wrote:
:) > The attached patch changes init_remote_state() so that sizeof_g_packet
:) > computed using REGISTER_RAW_SIZE() instead of blindly set to
:) > DEPRECATED_REGISTER_BYTES.
:) >
:) > I'm assuming two things which I'm not sure are true:
:) >
:) > 1) REGISTER_RAW_SIZE() is usable for all targets now
:) >
:) > 2) REGISTER_RAW_SIZE() is valid when passed pseudo register.
:) >
:) > Ok to commit?
:)
:) Just a few tweaks.
:) > - /* Start out by having the remote protocol mimic the existing
:) > - behavour - just copy in the description of the register cache. */
:) > - rs->sizeof_g_packet = DEPRECATED_REGISTER_BYTES; /* OK */
:) > + rs->sizeof_g_packet = 0;
:)
:) For the moment it is safer to do:
:)
:) if (DEPRECATED_REGISTER_BYTES_P ())
:) rs-> ... = ...;
:) else
:) rs-> ... = 0;
Well, DEPRECATED_REGISTER_BYTES_P() doesn't seem to exist.
So there should need to be a change in gdbarch.sh I assume.
Round two is attached.
Ok now?
Ted Roth
2003-06-03 Theodore A. Roth <troth@openavr.org>
* gdbarch.sh: Generate a predicate for DEPRECATED_REGISTER_BYTES.
* gdbarch.[ch]: Re-generate.
* remote.c (init_remote_state): Compute sizeof_g_packet by
accumulation of the size of all registers instead of blindly using
DEPRECATED_REGISTER_BYTES.
[-- Attachment #2: Type: TEXT/PLAIN, Size: 6324 bytes --]
2003-06-03 Theodore A. Roth <troth@openavr.org>
* gdbarch.sh: Generate a predicate for DEPRECATED_REGISTER_BYTES.
* gdbarch.[ch]: Re-generate.
* remote.c (init_remote_state): Compute sizeof_g_packet by
accumulation of the size of all registers instead of blindly using
DEPRECATED_REGISTER_BYTES.
Index: gdbarch.c
===================================================================
RCS file: /cvs/src/src/gdb/gdbarch.c,v
retrieving revision 1.218
diff -u -p -r1.218 gdbarch.c
--- gdbarch.c 2 Jun 2003 02:54:33 -0000 1.218
+++ gdbarch.c 3 Jun 2003 22:58:56 -0000
@@ -644,6 +644,7 @@ verify_gdbarch (struct gdbarch *gdbarch)
/* Skip verify of sdb_reg_to_regnum, invalid_p == 0 */
/* Skip verify of dwarf2_reg_to_regnum, invalid_p == 0 */
/* Skip verify of register_name, invalid_p == 0 */
+ /* Skip verify of deprecated_register_bytes, has predicate */
/* Skip verify of register_byte, has predicate */
/* Skip verify of register_raw_size, invalid_p == 0 */
/* Skip verify of deprecated_max_register_raw_size, has predicate */
@@ -1483,6 +1484,15 @@ gdbarch_dump (struct gdbarch *gdbarch, s
(long) current_gdbarch->deprecated_push_return_address
/*DEPRECATED_PUSH_RETURN_ADDRESS ()*/);
#endif
+#ifdef DEPRECATED_REGISTER_BYTES_P
+ fprintf_unfiltered (file,
+ "gdbarch_dump: %s # %s\n",
+ "DEPRECATED_REGISTER_BYTES_P()",
+ XSTRING (DEPRECATED_REGISTER_BYTES_P ()));
+ fprintf_unfiltered (file,
+ "gdbarch_dump: DEPRECATED_REGISTER_BYTES_P() = %d\n",
+ DEPRECATED_REGISTER_BYTES_P ());
+#endif
#ifdef DEPRECATED_REGISTER_BYTES
fprintf_unfiltered (file,
"gdbarch_dump: DEPRECATED_REGISTER_BYTES # %s\n",
@@ -3322,6 +3332,13 @@ set_gdbarch_deprecated_register_size (st
int deprecated_register_size)
{
gdbarch->deprecated_register_size = deprecated_register_size;
+}
+
+int
+gdbarch_deprecated_register_bytes_p (struct gdbarch *gdbarch)
+{
+ gdb_assert (gdbarch != NULL);
+ return gdbarch->deprecated_register_bytes != 0;
}
int
Index: gdbarch.h
===================================================================
RCS file: /cvs/src/src/gdb/gdbarch.h,v
retrieving revision 1.188
diff -u -p -r1.188 gdbarch.h
--- gdbarch.h 2 Jun 2003 02:54:33 -0000 1.188
+++ gdbarch.h 3 Jun 2003 22:58:57 -0000
@@ -662,6 +662,31 @@ extern void set_gdbarch_deprecated_regis
#define DEPRECATED_REGISTER_SIZE (gdbarch_deprecated_register_size (current_gdbarch))
#endif
+#if defined (DEPRECATED_REGISTER_BYTES)
+/* Legacy for systems yet to multi-arch DEPRECATED_REGISTER_BYTES */
+#if !defined (DEPRECATED_REGISTER_BYTES_P)
+#define DEPRECATED_REGISTER_BYTES_P() (1)
+#endif
+#endif
+
+/* Default predicate for non- multi-arch targets. */
+#if (!GDB_MULTI_ARCH) && !defined (DEPRECATED_REGISTER_BYTES_P)
+#define DEPRECATED_REGISTER_BYTES_P() (0)
+#endif
+
+extern int gdbarch_deprecated_register_bytes_p (struct gdbarch *gdbarch);
+#if (GDB_MULTI_ARCH > GDB_MULTI_ARCH_PARTIAL) && defined (DEPRECATED_REGISTER_BYTES_P)
+#error "Non multi-arch definition of DEPRECATED_REGISTER_BYTES"
+#endif
+#if (GDB_MULTI_ARCH > GDB_MULTI_ARCH_PARTIAL) || !defined (DEPRECATED_REGISTER_BYTES_P)
+#define DEPRECATED_REGISTER_BYTES_P() (gdbarch_deprecated_register_bytes_p (current_gdbarch))
+#endif
+
+/* Default (value) for non- multi-arch platforms. */
+#if (!GDB_MULTI_ARCH) && !defined (DEPRECATED_REGISTER_BYTES)
+#define DEPRECATED_REGISTER_BYTES (0)
+#endif
+
extern int gdbarch_deprecated_register_bytes (struct gdbarch *gdbarch);
extern void set_gdbarch_deprecated_register_bytes (struct gdbarch *gdbarch, int deprecated_register_bytes);
#if (GDB_MULTI_ARCH > GDB_MULTI_ARCH_PARTIAL) && defined (DEPRECATED_REGISTER_BYTES)
Index: gdbarch.sh
===================================================================
RCS file: /cvs/src/src/gdb/gdbarch.sh,v
retrieving revision 1.240
diff -u -p -r1.240 gdbarch.sh
--- gdbarch.sh 2 Jun 2003 02:54:34 -0000 1.240
+++ gdbarch.sh 3 Jun 2003 22:58:58 -0000
@@ -473,7 +473,7 @@ f:2:SDB_REG_TO_REGNUM:int:sdb_reg_to_reg
f:2:DWARF2_REG_TO_REGNUM:int:dwarf2_reg_to_regnum:int dwarf2_regnr:dwarf2_regnr:::no_op_reg_to_regnum::0
f:2:REGISTER_NAME:const char *:register_name:int regnr:regnr:::legacy_register_name::0
v::DEPRECATED_REGISTER_SIZE:int:deprecated_register_size
-v::DEPRECATED_REGISTER_BYTES:int:deprecated_register_bytes
+V::DEPRECATED_REGISTER_BYTES:int:deprecated_register_bytes
# NOTE: cagney/2002-05-02: This function with predicate has a valid
# (callable) initial value. As a consequence, even when the predicate
# is false, the corresponding function works. This simplifies the
Index: remote.c
===================================================================
RCS file: /cvs/src/src/gdb/remote.c,v
retrieving revision 1.100
diff -u -p -r1.100 remote.c
--- remote.c 17 May 2003 05:59:58 -0000 1.100
+++ remote.c 3 Jun 2003 22:59:00 -0000
@@ -261,9 +261,10 @@ init_remote_state (struct gdbarch *gdbar
int regnum;
struct remote_state *rs = xmalloc (sizeof (struct remote_state));
- /* Start out by having the remote protocol mimic the existing
- behavour - just copy in the description of the register cache. */
- rs->sizeof_g_packet = DEPRECATED_REGISTER_BYTES; /* OK */
+ if (DEPRECATED_REGISTER_BYTES_P ())
+ rs->sizeof_g_packet = DEPRECATED_REGISTER_BYTES;
+ else
+ rs->sizeof_g_packet = 0;
/* Assume a 1:1 regnum<->pnum table. */
rs->regs = xcalloc (NUM_REGS + NUM_PSEUDO_REGS, sizeof (struct packet_reg));
@@ -274,8 +275,11 @@ init_remote_state (struct gdbarch *gdbar
r->regnum = regnum;
r->offset = REGISTER_BYTE (regnum);
r->in_g_packet = (regnum < NUM_REGS);
- /* ...size = REGISTER_RAW_SIZE (regnum); */
/* ...name = REGISTER_NAME (regnum); */
+
+ /* Compute packet size by accumulating the size of all registers. */
+ if (!DEPRECATED_REGISTER_BYTES_P ())
+ rs->sizeof_g_packet += register_size (current_gdbarch, regnum);
}
/* Default maximum number of characters in a packet body. Many
next prev parent reply other threads:[~2003-06-03 23:13 UTC|newest]
Thread overview: 5+ messages / expand[flat|nested] mbox.gz Atom feed top
2003-06-03 21:48 Theodore A. Roth
2003-06-03 22:22 ` Andrew Cagney
2003-06-03 23:13 ` Theodore A. Roth [this message]
2003-06-04 2:46 ` Andrew Cagney
2003-06-04 4:35 ` Theodore A. Roth
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=Pine.LNX.4.53.0306031539250.17269@knuth.amplepower.com \
--to=troth@openavr.org \
--cc=ac131313@redhat.com \
--cc=gdb-patches@sources.redhat.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox