From: Yao Qi <qiyaoltc@gmail.com>
To: Antoine Tremblay <antoine.tremblay@ericsson.com>
Cc: <gdb-patches@sourceware.org>, <qiyaoltc@gmail.com>
Subject: Re: [PATCH v7.2] Support software single step on ARM in GDBServer
Date: Fri, 11 Dec 2015 17:28:00 -0000 [thread overview]
Message-ID: <86lh90q4hf.fsf@gmail.com> (raw)
In-Reply-To: <1449851185-9066-1-git-send-email-antoine.tremblay@ericsson.com> (Antoine Tremblay's message of "Fri, 11 Dec 2015 11:26:25 -0500")
Antoine Tremblay <antoine.tremblay@ericsson.com> writes:
> Change the name of the ops read_memory_unsigned_integer to read_mem_uint
>
> OK like that ?
Yes.
>
> ---
> This patch teaches GDBServer how to software single step on ARM
> linux by sharing code with GDB.
>
> The arm_get_next_pcs function in GDB is now shared with GDBServer. So that
> GDBServer can use the function to return the possible addresses of the next PC.
>
> A proper shared context was also needed so that we could share the code, this
> context is described in the arm_get_next_pcs structure.
>
> Testing :
>
> No regressions, tested on ubuntu 14.04 ARMv7 and x86.
> With gdbserver-{native,extended} / { -marm -mthumb }
>
> gdb/ChangeLog:
>
> * Makefile.in (ALL_TARGET_OBS): Append arm-get-next-pcs.o, arm-linux.o.
> (ALLDEPFILES): Append arm-get-next-pcs.c, arm-linux.c
> (arm-linux.o): New rule.
> (arm-get-next-pcs.o): New rule.
> * arch/arm-get-next-pcs.c: New file.
> * arch/arm-get-next-pcs.h: New file.
> * arch/arm-linux.h: New file.
> * arch/arm-linux.c: New file.
> * arm.c: Include common-regcache.c.
> (thumb_advance_itstate): Moved from arm-tdep.c.
> (arm_instruction_changes_pc): Likewise.
> (thumb_instruction_changes_pc): Likewise.
> (thumb2_instruction_changes_pc): Likewise.
> (shifted_reg_val): Likewise.
> * arm.h (submask): Move macro from arm-tdep.h
> (bit): Likewise.
> (bits): Likewise.
> (sbits): Likewise.
> (BranchDest): Likewise.
> (thumb_advance_itstate): Moved declaration from arm-tdep.h
> (arm_instruction_changes_pc): Likewise.
> (thumb_instruction_changes_pc): Likewise.
> (thumb2_instruction_changes_pc): Likewise.
> (shifted_reg_val): Likewise.
> * arm-linux-tdep.c: Include arch/arm.h, arch/arm-get-next-pcs.h
> arch/arm-linux.h.
> (arm_linux_get_next_pcs_ops): New struct.
> (ARM_SIGCONTEXT_R0, ARM_UCONTEXT_SIGCONTEXT,
> ARM_OLD_RT_SIGFRAME_SIGINFO, ARM_OLD_RT_SIGFRAME_UCONTEXT,
> ARM_NEW_RT_SIGFRAME_UCONTEXT, ARM_NEW_SIGFRAME_MAGIC): Move stack
> layout defines to arch/arm-linux.h.
> (arm_linux_sigreturn_next_pc_offset): Move to arch/arm-linux.c.
> (arm_linux_software_single_step): Adjust for arm_get_next_pcs
> implementation.
> * arm-tdep.c: Include arch/arm-get-next-pcs.h.
> (arm_get_next_pcs_ops): New struct.
> (submask): Move macro to arm.h.
> (bit): Likewise.
> (bits): Likewise.
> (sbits): Likewise.
> (BranchDest): Likewise.
> (thumb_instruction_changes_pc): Move to arm.c
> (thumb2_instruction_changes_pc): Likewise.
> (arm_instruction_changes_pc): Likewise.
> (shifted_reg_val): Likewise.
> (thumb_advance_itstate): Likewise.
> (thumb_get_next_pc_raw): Move to arm-get-next-pcs.c.
> (arm_get_next_pc_raw): Likewise.
> (arm_get_next_pc): Likewise.
> (thumb_deal_with_atomic_sequence_raw): Likewise.
> (arm_deal_with_atomic_sequence_raw): Likewise.
> (arm_deal_with_atomic_sequence): Likewise.
> (arm_get_next_pcs_read_memory_unsigned_integer): New function.
> (arm_get_next_pcs_addr_bits_remove): Likewise.
> (arm_get_next_pcs_syscall_next_pc): Likewise.
> (arm_get_next_pcs_is_thumb): Likewise.
> (arm_software_single_step): Adjust for arm_get_next_pcs
> implementation.
> * arm-tdep.h: (arm_get_next_pc): Remove declaration.
> (arm_get_next_pcs_read_memory_unsigned_integer):
> New declaration.
> (arm_get_next_pcs_addr_bits_remove): Likewise.
> (arm_get_next_pcs_syscall_next_pc): Likewise.
> (arm_get_next_pcs_is_thumb): Likewise.
> (arm_deal_with_atomic_sequence: Remove declaration.
> * common/gdb_vecs.h: Add CORE_ADDR vector definition.
> * configure.tgt (aarch64*-*-linux): Add arm-get-next-pcs.o, arm-linux.o.
ChangeLog line max length is 74.
https://sourceware.org/gdb/wiki/ContributionChecklist
> (arm*-wince-pe): Add arm-get-next-pcs.o.
> (arm*-*-linux*): Add arm-get-next-pcs.o, arm-linux.o, arm-get-next-pcs.o
> (arm*-*-netbsd* | arm*-*-knetbsd*-gnu): Add arm-get-next-pcs.o.
Replace "|" with ",".
> (arm*-*-openbsd*): Likewise.
> (arm*-*-symbianelf*): Likewise.
> (arm*-*-*): Likewise.
> * symtab.h: Move CORE_ADDR vector definition to gdb_vecs.h.
>
> gdb/gdbserver/ChangeLog:
>
> * Makefile.in (SFILES): Append arch/arm-linux.c,
> arch/arm-get-next-pcs.c.
> (arm-linux.o): New rule.
> (arm-get-next-pcs.o): New rule.
> * configure.srv (arm*-*-linux*): Add arm-get-next-pcs.o,
> arm-linux.o.
> * linux-aarch32-low.c (arm_abi_breakpoint): Remove macro. Moved
> to linux-aarch32-low.c.
> (arm_eabi_breakpoint, arm_breakpoint): Likewise.
> (arm_breakpoint_len, thumb_breakpoint): Likewise.
> (thumb_breakpoint_len, thumb2_breakpoint): Likewise.
> (thumb2_breakpoint_len): Likewise.
These are not started with TAB.
> +
> + if ((inst1 & 0xff00) == 0xbd00) /* pop {rlist, pc} */
> + {
> + CORE_ADDR sp;
> +
> + /* Fetch the saved PC from the stack. It's stored above
> + all of the other registers. */
> + offset = bitcount (bits (inst1, 0, 7)) * INT_REGISTER_SIZE;
> + sp = regcache_raw_get_unsigned (regcache, ARM_SP_REGNUM);
> + nextpc = self->ops->read_mem_uint (sp + offset, 4, byte_order);
Redundant spaces.
--
Yao (齐尧)
next prev parent reply other threads:[~2015-12-11 17:28 UTC|newest]
Thread overview: 48+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-12-08 14:07 [PATCH v7 0/8] Support software single step and conditional breakpoints " Antoine Tremblay
2015-12-08 14:07 ` [PATCH v7 5/8] Share regcache function regcache_raw_read_unsigned Antoine Tremblay
2015-12-08 14:07 ` [PATCH v7 1/8] Replace breakpoint_reinsert_addr by get_next_pcs operation in GDBServer Antoine Tremblay
2015-12-08 14:07 ` [PATCH v7 2/8] Share some ARM target dependent code from GDB with GDBServer Antoine Tremblay
2015-12-08 14:07 ` [PATCH v7 3/8] Use xml-syscall to compare syscall numbers in arm_linux_sigreturn_return-addr Antoine Tremblay
2015-12-11 11:29 ` Yao Qi
2015-12-11 11:59 ` Pedro Alves
2015-12-11 12:02 ` Yao Qi
2015-12-11 12:05 ` Pedro Alves
2015-12-11 12:31 ` Antoine Tremblay
2015-12-11 12:47 ` Pedro Alves
2015-12-11 13:04 ` Antoine Tremblay
2015-12-11 13:20 ` Pedro Alves
2015-12-11 13:25 ` Antoine Tremblay
2015-12-15 12:46 ` Antoine Tremblay
2015-12-16 15:59 ` Pedro Alves
2015-12-16 16:36 ` Yao Qi
2015-12-16 16:37 ` Antoine Tremblay
2015-12-11 12:29 ` Antoine Tremblay
2015-12-16 15:59 ` Pedro Alves
2015-12-16 16:05 ` Antoine Tremblay
2015-12-16 16:24 ` [PATCH v7.1 " Antoine Tremblay
2015-12-17 10:09 ` Yao Qi
2015-12-17 10:17 ` Pedro Alves
2015-12-17 12:51 ` Antoine Tremblay
2015-12-17 13:25 ` Yao Qi
2015-12-17 13:36 ` Antoine Tremblay
2015-12-08 14:07 ` [PATCH v7 4/8] Refactor arm_software_single_step to use regcache Antoine Tremblay
2015-12-11 11:37 ` Yao Qi
2015-12-11 12:41 ` Antoine Tremblay
2015-12-08 14:08 ` [PATCH v7 7/8] Enable software single stepping for while-stepping actions in GDBServer Antoine Tremblay
2015-12-08 14:08 ` [PATCH v7 6/8] Support software single step on ARM " Antoine Tremblay
2015-12-09 20:09 ` [PATCH v7.1] " Antoine Tremblay
2015-12-11 13:28 ` Yao Qi
2015-12-11 13:36 ` Antoine Tremblay
2015-12-11 13:41 ` Antoine Tremblay
2015-12-11 14:45 ` Yao Qi
2015-12-11 14:43 ` Yao Qi
2015-12-11 15:06 ` Antoine Tremblay
2015-12-11 15:26 ` Antoine Tremblay
2015-12-11 15:38 ` Yao Qi
2015-12-11 16:11 ` Antoine Tremblay
2015-12-11 16:26 ` [PATCH v7.2] " Antoine Tremblay
2015-12-11 17:28 ` Yao Qi [this message]
2015-12-11 17:52 ` Antoine Tremblay
2015-12-08 14:08 ` [PATCH v7 8/8] Enable conditional breakpoints for targets that support software single step " Antoine Tremblay
2015-12-10 15:59 ` [PATCH v7 0/8] Support software single step and conditional breakpoints on ARM " Yao Qi
2015-12-10 16:02 ` Antoine Tremblay
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=86lh90q4hf.fsf@gmail.com \
--to=qiyaoltc@gmail.com \
--cc=antoine.tremblay@ericsson.com \
--cc=gdb-patches@sourceware.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox