* Re: Unreviewed patch: add include/gdb/sim-sh.h (Was: Re: SH simulator register numbers: include/gdb/sim-sh.h)
[not found] ` <15622.28382.644505.747327@localhost.redhat.com>
@ 2002-06-12 5:33 ` Joern Rennecke
2002-06-12 14:34 ` Andrew Cagney
0 siblings, 1 reply; 2+ messages in thread
From: Joern Rennecke @ 2002-06-12 5:33 UTC (permalink / raw)
To: Elena Zannoni; +Cc: ac131313, binutils, gdb-patches, bje
[-- Attachment #1: Type: text/plain, Size: 807 bytes --]
Elena Zannoni wrote:
>
> Sorry.
> Can you format the file with one register per line?
> Take a look at sim-d10v.h, now that Andrew cleaned it up.
Ok.
> I am not sure that leaving holes in the register numbers is a good idea.
It's only leaving holes for specific subtargets that lack registers.
> Does this work with gdb as it is now?
Yes. This is just putting the SH[1-4], sh-dsp, sh3e, sh3-dsp constants
in place and uses them, istead of literals. I wanted to get this out of
the way before tackling the actual renumbering of the sh64 registers, to
cut down on the size of potentially controversial patches to review.
I have attached the updated patch set including the sim/sh patches.
--
--------------------------
SuperH
2430 Aztec West / Almondsbury / BRISTOL / BS32 4AQ
T:+44 1454 462330
[-- Attachment #2: sim-sh-patch --]
[-- Type: text/plain, Size: 17842 bytes --]
Wed Jun 12 13:20:51 2002 J"orn Rennecke <joern.rennecke@superh.com>
include/gdb:
* sim-sh.h: Add enum constants for sh[1-4], sh3e, sh3?-dsp.
sim/sh:
* Makefile (interp.o): Depend on $(srcroot)/include/gdb/sim-sh.h.
* interp.c: Include "gdb/sim-sh.h".
(sim_store_register, sim_fetch_register): Use constants defined there.
Index: include/gdb/sim-sh.h
===================================================================
RCS file: /cvs/src/src/include/gdb/sim-sh.h,v
retrieving revision 1.1
diff -p -r1.1 sim-sh.h
*** include/gdb/sim-sh.h 10 May 2002 22:53:56 -0000 1.1
--- include/gdb/sim-sh.h 12 Jun 2002 12:18:56 -0000
***************
*** 1,5 ****
/* This file defines the interface between the sh simulator and gdb.
! Copyright (C) 2002 Free Software Foundation, Inc.
This file is part of GDB.
--- 1,5 ----
/* This file defines the interface between the sh simulator and gdb.
! Copyright (C) 2000, 2002 Free Software Foundation, Inc.
This file is part of GDB.
*************** extern "C" { // }
*** 27,51 ****
/* The simulator makes use of the following register information. */
enum
! {
! SIM_SH64_R0_REGNUM = 0,
! SIM_SH64_SP_REGNUM = 15,
! SIM_SH64_PC_REGNUM = 64,
! SIM_SH64_SR_REGNUM = 65,
! SIM_SH64_SSR_REGNUM = 66,
! SIM_SH64_SPC_REGNUM = 67,
! SIM_SH64_TR0_REGNUM = 68,
! SIM_SH64_FPCSR_REGNUM = 76,
! SIM_SH64_FR0_REGNUM = 77
! };
enum
! {
! SIM_SH64_NR_REGS = 141, /* total number of architectural registers */
! SIM_SH64_NR_R_REGS = 64, /* number of general registers */
! SIM_SH64_NR_TR_REGS = 8, /* number of target registers */
! SIM_SH64_NR_FP_REGS = 64 /* number of floating point registers */
! };
#ifdef __cplusplus
}
--- 27,158 ----
/* The simulator makes use of the following register information. */
enum
! {
! SIM_SH_R0_REGNUM = 0,
! SIM_SH_R1_REGNUM,
! SIM_SH_R2_REGNUM,
! SIM_SH_R3_REGNUM,
! SIM_SH_R4_REGNUM,
! SIM_SH_R5_REGNUM,
! SIM_SH_R6_REGNUM,
! SIM_SH_R7_REGNUM,
! SIM_SH_R8_REGNUM,
! SIM_SH_R9_REGNUM,
! SIM_SH_R10_REGNUM,
! SIM_SH_R11_REGNUM,
! SIM_SH_R12_REGNUM,
! SIM_SH_R13_REGNUM,
! SIM_SH_R14_REGNUM,
! SIM_SH_R15_REGNUM,
! SIM_SH_PC_REGNUM,
! SIM_SH_PR_REGNUM,
! SIM_SH_GBR_REGNUM,
! SIM_SH_VBR_REGNUM,
! SIM_SH_MACH_REGNUM,
! SIM_SH_MACL_REGNUM,
! SIM_SH_SR_REGNUM,
! SIM_SH_FPUL_REGNUM,
! SIM_SH_FPSCR_REGNUM,
! SIM_SH_FR0_REGNUM, /* FRn registers: sh3e / sh4 */
! SIM_SH_FR1_REGNUM,
! SIM_SH_FR2_REGNUM,
! SIM_SH_FR3_REGNUM,
! SIM_SH_FR4_REGNUM,
! SIM_SH_FR5_REGNUM,
! SIM_SH_FR6_REGNUM,
! SIM_SH_FR7_REGNUM,
! SIM_SH_FR8_REGNUM,
! SIM_SH_FR9_REGNUM,
! SIM_SH_FR10_REGNUM,
! SIM_SH_FR11_REGNUM,
! SIM_SH_FR12_REGNUM,
! SIM_SH_FR13_REGNUM,
! SIM_SH_FR14_REGNUM,
! SIM_SH_FR15_REGNUM,
! SIM_SH_SSR_REGNUM, /* sh3{,e,-dsp}, sh4 */
! SIM_SH_SPC_REGNUM, /* sh3{,e,-dsp}, sh4 */
! SIM_SH_R0_BANK0_REGNUM, /* SIM_SH_Rn_BANKm_REGNUM: sh3[e] / sh4 */
! SIM_SH_R1_BANK0_REGNUM,
! SIM_SH_R2_BANK0_REGNUM,
! SIM_SH_R3_BANK0_REGNUM,
! SIM_SH_R4_BANK0_REGNUM,
! SIM_SH_R5_BANK0_REGNUM,
! SIM_SH_R6_BANK0_REGNUM,
! SIM_SH_R7_BANK0_REGNUM,
! SIM_SH_R0_BANK1_REGNUM,
! SIM_SH_R1_BANK1_REGNUM,
! SIM_SH_R2_BANK1_REGNUM,
! SIM_SH_R3_BANK1_REGNUM,
! SIM_SH_R4_BANK1_REGNUM,
! SIM_SH_R5_BANK1_REGNUM,
! SIM_SH_R6_BANK1_REGNUM,
! SIM_SH_R7_BANK1_REGNUM,
! SIM_SH_XF0_REGNUM,
! SIM_SH_XF1_REGNUM,
! SIM_SH_XF2_REGNUM,
! SIM_SH_XF3_REGNUM,
! SIM_SH_XF4_REGNUM,
! SIM_SH_XF5_REGNUM,
! SIM_SH_XF6_REGNUM,
! SIM_SH_XF7_REGNUM,
! SIM_SH_XF8_REGNUM,
! SIM_SH_XF9_REGNUM,
! SIM_SH_XF10_REGNUM,
! SIM_SH_XF11_REGNUM,
! SIM_SH_XF12_REGNUM,
! SIM_SH_XF13_REGNUM,
! SIM_SH_XF14_REGNUM,
! SIM_SH_XF15_REGNUM,
! SIM_SH_SGR_REGNUM,
! SIM_SH_DBR_REGNUM,
! SIM_SH4_NUM_REGS
! /* 77..127: room for expansion. */
! };
!
! /* sh[3]-dsp */
! enum
! {
! SIM_SH_DSR_REGNUM = SIM_SH_FPSCR_REGNUM,
! SIM_SH_A0G_REGNUM,
! SIM_SH_A0_REGNUM,
! SIM_SH_A1G_REGNUM,
! SIM_SH_A1_REGNUM,
! SIM_SH_M0_REGNUM,
! SIM_SH_M1_REGNUM,
! SIM_SH_X0_REGNUM,
! SIM_SH_X1_REGNUM,
! SIM_SH_Y0_REGNUM,
! SIM_SH_Y1_REGNUM,
!
! SIM_SH_MOD_REGNUM = SIM_SH_FR15_REGNUM,
!
! SIM_SH_RS_REGNUM = SIM_SH_R0_BANK0_REGNUM,
! SIM_SH_RE_REGNUM,
!
! SIM_SH_R0_BANK_REGNUM = SIM_SH_R0_BANK1_REGNUM,
! SIM_SH_R7_BANK_REGNUM = SIM_SH_R7_BANK1_REGNUM
! };
!
! enum
! {
! SIM_SH64_R0_REGNUM = 0,
! SIM_SH64_SP_REGNUM = 15,
! SIM_SH64_PC_REGNUM = 64,
! SIM_SH64_SR_REGNUM = 65,
! SIM_SH64_SSR_REGNUM = 66,
! SIM_SH64_SPC_REGNUM = 67,
! SIM_SH64_TR0_REGNUM = 68,
! SIM_SH64_FPCSR_REGNUM = 76,
! SIM_SH64_FR0_REGNUM = 77
! };
enum
! {
! SIM_SH64_NR_REGS = 141, /* total number of architectural registers */
! SIM_SH64_NR_R_REGS = 64, /* number of general registers */
! SIM_SH64_NR_TR_REGS = 8, /* number of target registers */
! SIM_SH64_NR_FP_REGS = 64 /* number of floating point registers */
! };
#ifdef __cplusplus
}
Index: sim/sh/Makefile.in
===================================================================
RCS file: /cvs/src/src/sim/sh/Makefile.in,v
retrieving revision 1.2
diff -p -r1.2 Makefile.in
*** sim/sh/Makefile.in 7 Jun 2000 14:59:16 -0000 1.2
--- sim/sh/Makefile.in 12 Jun 2002 12:18:56 -0000
*************** SIM_EXTRA_CLEAN = sh-clean
*** 24,30 ****
## COMMON_POST_CONFIG_FRAG
! interp.o: interp.c code.c table.c ppi.c
code.c: gencode
./gencode -x >code.c
--- 24,30 ----
## COMMON_POST_CONFIG_FRAG
! interp.o: interp.c code.c table.c ppi.c $(srcroot)/include/gdb/sim-sh.h
code.c: gencode
./gencode -x >code.c
Index: sim/sh/interp.c
===================================================================
RCS file: /cvs/src/src/sim/sh/interp.c,v
retrieving revision 1.5
diff -p -r1.5 interp.c
*** sim/sh/interp.c 9 Jun 2002 15:45:52 -0000 1.5
--- sim/sh/interp.c 12 Jun 2002 12:18:56 -0000
***************
*** 29,34 ****
--- 29,35 ----
#include "bfd.h"
#include "gdb/callback.h"
#include "gdb/remote-sim.h"
+ #include "gdb/sim-sh.h"
/* This file is local - if newlib changes, then so should this. */
#include "syscall.h"
*************** sim_store_register (sd, rn, memory, leng
*** 1790,1887 ****
val = swap (* (int *)memory);
switch (rn)
{
! case 0: case 1: case 2: case 3: case 4: case 5: case 6: case 7:
! case 8: case 9: case 10: case 11: case 12: case 13: case 14: case 15:
saved_state.asregs.regs[rn] = val;
break;
! case 16:
saved_state.asregs.pc = val;
break;
! case 17:
PR = val;
break;
! case 18:
GBR = val;
break;
! case 19:
VBR = val;
break;
! case 20:
MACH = val;
break;
! case 21:
MACL = val;
break;
! case 22:
SET_SR (val);
break;
! case 23:
FPUL = val;
break;
! case 24:
SET_FPSCR (val);
break;
! case 25:
if (target_dsp)
A0G = val;
! else case 26:
if (target_dsp)
A0 = val;
! else case 27:
if (target_dsp)
A1G = val;
! else case 28:
if (target_dsp)
A1 = val;
! else case 29:
if (target_dsp)
M0 = val;
! else case 30:
if (target_dsp)
M1 = val;
! else case 31:
if (target_dsp)
X0 = val;
! else case 32:
if (target_dsp)
X1 = val;
! else case 33:
if (target_dsp)
Y0 = val;
! else case 34:
if (target_dsp)
Y1 = val;
! else case 40:
if (target_dsp)
SET_MOD (val);
! else case 35: case 36: case 37: case 38: case 39:
! SET_FI (rn - 25, val);
break;
! case 41:
SSR = val;
break;
! case 42:
SPC = val;
break;
/* The rn_bank idiosyncracies are not due to hardware differences, but to
a weird aliasing naming scheme for sh3 / sh3e / sh4. */
! case 43:
if (target_dsp)
RS = val;
! else case 44:
if (target_dsp)
RE = val;
! else case 45: case 46: case 47: case 48: case 49: case 50:
if (SR_MD && SR_RB)
! Rn_BANK (rn - 43) = val;
else
! saved_state.asregs.regs[rn - 43] = val;
break;
! case 51: case 52: case 53: case 54: case 55: case 56: case 57: case 58:
if (target_dsp || ! SR_MD || ! SR_RB)
! SET_Rn_BANK (rn - 51, val);
else
! saved_state.asregs.regs[rn - 51] = val;
break;
default:
return 0;
--- 1791,1899 ----
val = swap (* (int *)memory);
switch (rn)
{
! case SIM_SH_R0_REGNUM: case SIM_SH_R1_REGNUM: case SIM_SH_R2_REGNUM:
! case SIM_SH_R3_REGNUM: case SIM_SH_R4_REGNUM: case SIM_SH_R5_REGNUM:
! case SIM_SH_R6_REGNUM: case SIM_SH_R7_REGNUM: case SIM_SH_R8_REGNUM:
! case SIM_SH_R9_REGNUM: case SIM_SH_R10_REGNUM: case SIM_SH_R11_REGNUM:
! case SIM_SH_R12_REGNUM: case SIM_SH_R13_REGNUM: case SIM_SH_R14_REGNUM:
! case SIM_SH_R15_REGNUM:
saved_state.asregs.regs[rn] = val;
break;
! case SIM_SH_PC_REGNUM:
saved_state.asregs.pc = val;
break;
! case SIM_SH_PR_REGNUM:
PR = val;
break;
! case SIM_SH_GBR_REGNUM:
GBR = val;
break;
! case SIM_SH_VBR_REGNUM:
VBR = val;
break;
! case SIM_SH_MACH_REGNUM:
MACH = val;
break;
! case SIM_SH_MACL_REGNUM:
MACL = val;
break;
! case SIM_SH_SR_REGNUM:
SET_SR (val);
break;
! case SIM_SH_FPUL_REGNUM:
FPUL = val;
break;
! case SIM_SH_FPSCR_REGNUM:
SET_FPSCR (val);
break;
! case SIM_SH_A0G_REGNUM:
if (target_dsp)
A0G = val;
! else case SIM_SH_A0_REGNUM:
if (target_dsp)
A0 = val;
! else case SIM_SH_A1G_REGNUM:
if (target_dsp)
A1G = val;
! else case SIM_SH_A1_REGNUM:
if (target_dsp)
A1 = val;
! else case SIM_SH_M0_REGNUM:
if (target_dsp)
M0 = val;
! else case SIM_SH_M1_REGNUM:
if (target_dsp)
M1 = val;
! else case SIM_SH_X0_REGNUM:
if (target_dsp)
X0 = val;
! else case SIM_SH_X1_REGNUM:
if (target_dsp)
X1 = val;
! else case SIM_SH_Y0_REGNUM:
if (target_dsp)
Y0 = val;
! else case SIM_SH_Y1_REGNUM:
if (target_dsp)
Y1 = val;
! else case SIM_SH_MOD_REGNUM:
if (target_dsp)
SET_MOD (val);
! else case SIM_SH_FR0_REGNUM+10:
! case SIM_SH_FR0_REGNUM+11: case SIM_SH_FR0_REGNUM+12:
! case SIM_SH_FR0_REGNUM+13: case SIM_SH_FR0_REGNUM+14:
! SET_FI (rn - SIM_SH_FR0_REGNUM, val);
break;
! case SIM_SH_SSR_REGNUM:
SSR = val;
break;
! case SIM_SH_SPC_REGNUM:
SPC = val;
break;
/* The rn_bank idiosyncracies are not due to hardware differences, but to
a weird aliasing naming scheme for sh3 / sh3e / sh4. */
! case SIM_SH_RS_REGNUM:
if (target_dsp)
RS = val;
! else case SIM_SH_RE_REGNUM:
if (target_dsp)
RE = val;
! else case SIM_SH_R0_BANK0_REGNUM+2: case SIM_SH_R0_BANK0_REGNUM+3:
! case SIM_SH_R0_BANK0_REGNUM+4: case SIM_SH_R0_BANK0_REGNUM+5:
! case SIM_SH_R0_BANK0_REGNUM+6: case SIM_SH_R0_BANK0_REGNUM+7:
if (SR_MD && SR_RB)
! Rn_BANK (rn - SIM_SH_R0_BANK0_REGNUM) = val;
else
! saved_state.asregs.regs[rn - SIM_SH_R0_BANK0_REGNUM] = val;
break;
! case SIM_SH_R0_BANK_REGNUM+0: case SIM_SH_R0_BANK_REGNUM+1:
! case SIM_SH_R0_BANK_REGNUM+2: case SIM_SH_R0_BANK_REGNUM+3:
! case SIM_SH_R0_BANK_REGNUM+4: case SIM_SH_R0_BANK_REGNUM+5:
! case SIM_SH_R0_BANK_REGNUM+6: case SIM_SH_R0_BANK_REGNUM+7:
if (target_dsp || ! SR_MD || ! SR_RB)
! SET_Rn_BANK (rn - SIM_SH_R0_BANK_REGNUM, val);
else
! saved_state.asregs.regs[rn - SIM_SH_R0_BANK1_REGNUM] = val;
break;
default:
return 0;
*************** sim_fetch_register (sd, rn, memory, leng
*** 1901,1996 ****
init_pointers ();
switch (rn)
{
! case 0: case 1: case 2: case 3: case 4: case 5: case 6: case 7:
! case 8: case 9: case 10: case 11: case 12: case 13: case 14: case 15:
val = saved_state.asregs.regs[rn];
break;
! case 16:
val = saved_state.asregs.pc;
break;
! case 17:
val = PR;
break;
! case 18:
val = GBR;
break;
! case 19:
val = VBR;
break;
! case 20:
val = MACH;
break;
! case 21:
val = MACL;
break;
! case 22:
val = GET_SR ();
break;
! case 23:
val = FPUL;
break;
! case 24:
val = GET_FPSCR ();
break;
! case 25:
! val = target_dsp ? SEXT (A0G) : FI (0);
! break;
! case 26:
! val = target_dsp ? A0 : FI (1);
! break;
! case 27:
! val = target_dsp ? SEXT (A1G) : FI (2);
! break;
! case 28:
! val = target_dsp ? A1 : FI (3);
! break;
! case 29:
! val = target_dsp ? M0 : FI (4);
! break;
! case 30:
! val = target_dsp ? M1 : FI (5);
! break;
! case 31:
! val = target_dsp ? X0 : FI (6);
! break;
! case 32:
! val = target_dsp ? X1 : FI (7);
! break;
! case 33:
! val = target_dsp ? Y0 : FI (8);
! break;
! case 34:
! val = target_dsp ? Y1 : FI (9);
! break;
! case 35: case 36: case 37: case 38: case 39:
! val = FI (rn - 25);
! break;
! case 40:
! val = target_dsp ? MOD : FI (15);
break;
! case 41:
val = SSR;
break;
! case 42:
val = SPC;
break;
/* The rn_bank idiosyncracies are not due to hardware differences, but to
a weird aliasing naming scheme for sh3 / sh3e / sh4. */
! case 43:
if (target_dsp)
val = RS;
! else case 44:
if (target_dsp)
val = RE;
! else case 45: case 46: case 47: case 48: case 49: case 50:
val = (SR_MD && SR_RB
! ? Rn_BANK (rn - 43)
! : saved_state.asregs.regs[rn - 43]);
break;
! case 51: case 52: case 53: case 54: case 55: case 56: case 57: case 58:
val = (target_dsp || ! SR_MD || ! SR_RB
! ? Rn_BANK (rn - 51)
! : saved_state.asregs.regs[rn - 51]);
break;
default:
return 0;
--- 1913,2019 ----
init_pointers ();
switch (rn)
{
! case SIM_SH_R0_REGNUM: case SIM_SH_R1_REGNUM: case SIM_SH_R2_REGNUM:
! case SIM_SH_R3_REGNUM: case SIM_SH_R4_REGNUM: case SIM_SH_R5_REGNUM:
! case SIM_SH_R6_REGNUM: case SIM_SH_R7_REGNUM: case SIM_SH_R8_REGNUM:
! case SIM_SH_R9_REGNUM: case SIM_SH_R10_REGNUM: case SIM_SH_R11_REGNUM:
! case SIM_SH_R12_REGNUM: case SIM_SH_R13_REGNUM: case SIM_SH_R14_REGNUM:
! case SIM_SH_R15_REGNUM:
val = saved_state.asregs.regs[rn];
break;
! case SIM_SH_PC_REGNUM:
val = saved_state.asregs.pc;
break;
! case SIM_SH_PR_REGNUM:
val = PR;
break;
! case SIM_SH_GBR_REGNUM:
val = GBR;
break;
! case SIM_SH_VBR_REGNUM:
val = VBR;
break;
! case SIM_SH_MACH_REGNUM:
val = MACH;
break;
! case SIM_SH_MACL_REGNUM:
val = MACL;
break;
! case SIM_SH_SR_REGNUM:
val = GET_SR ();
break;
! case SIM_SH_FPUL_REGNUM:
val = FPUL;
break;
! case SIM_SH_FPSCR_REGNUM:
val = GET_FPSCR ();
break;
! case SIM_SH_A0G_REGNUM:
! if (target_dsp)
! val = SEXT (A0G);
! else case SIM_SH_A0_REGNUM:
! if (target_dsp)
! val = A0;
! else case SIM_SH_A1G_REGNUM:
! if (target_dsp)
! val = SEXT (A1G);
! else case SIM_SH_A1_REGNUM:
! if (target_dsp)
! val = A1;
! else case SIM_SH_M0_REGNUM:
! if (target_dsp)
! val = M0;
! else case SIM_SH_M1_REGNUM:
! if (target_dsp)
! val = M1;
! else case SIM_SH_X0_REGNUM:
! if (target_dsp)
! val = X0;
! else case SIM_SH_X1_REGNUM:
! if (target_dsp)
! val = X1;
! else case SIM_SH_Y0_REGNUM:
! if (target_dsp)
! val = Y0;
! else case SIM_SH_Y1_REGNUM:
! if (target_dsp)
! val = Y1;
! else case SIM_SH_MOD_REGNUM:
! if (target_dsp)
! val = MOD;
! else case SIM_SH_FR0_REGNUM+10:
! case SIM_SH_FR0_REGNUM+11: case SIM_SH_FR0_REGNUM+12:
! case SIM_SH_FR0_REGNUM+13: case SIM_SH_FR0_REGNUM+14:
! val = FI (rn - SIM_SH_FR0_REGNUM);
break;
! case SIM_SH_SSR_REGNUM:
val = SSR;
break;
! case SIM_SH_SPC_REGNUM:
val = SPC;
break;
/* The rn_bank idiosyncracies are not due to hardware differences, but to
a weird aliasing naming scheme for sh3 / sh3e / sh4. */
! case SIM_SH_RS_REGNUM:
if (target_dsp)
val = RS;
! else case SIM_SH_RE_REGNUM:
if (target_dsp)
val = RE;
! else case SIM_SH_R0_BANK0_REGNUM+2: case SIM_SH_R0_BANK0_REGNUM+3:
! case SIM_SH_R0_BANK0_REGNUM+4: case SIM_SH_R0_BANK0_REGNUM+5:
! case SIM_SH_R0_BANK0_REGNUM+6: case SIM_SH_R0_BANK0_REGNUM+7:
val = (SR_MD && SR_RB
! ? Rn_BANK (rn - SIM_SH_R0_BANK0_REGNUM)
! : saved_state.asregs.regs[rn - SIM_SH_R0_BANK0_REGNUM]);
break;
! case SIM_SH_R0_BANK_REGNUM+0: case SIM_SH_R0_BANK_REGNUM+1:
! case SIM_SH_R0_BANK_REGNUM+2: case SIM_SH_R0_BANK_REGNUM+3:
! case SIM_SH_R0_BANK_REGNUM+4: case SIM_SH_R0_BANK_REGNUM+5:
! case SIM_SH_R0_BANK_REGNUM+6: case SIM_SH_R0_BANK_REGNUM+7:
val = (target_dsp || ! SR_MD || ! SR_RB
! ? Rn_BANK (rn - SIM_SH_R0_BANK_REGNUM)
! : saved_state.asregs.regs[rn - SIM_SH_R0_BANK1_REGNUM]);
break;
default:
return 0;
^ permalink raw reply [flat|nested] 2+ messages in thread