[rfa/doc] Revise ``obsolete''

[rfa/doc] Revise ``obsolete''

[Andrew Cagney]

[-- Attachment #1: Type: text/plain, Size: 139 bytes --]

Minor cleanup.

Main thing is to use @enumerate for the list of tasks.  That way people 
can say I'm ``Obosolete stage 4'' :-)

ok,
Andrew

[-- Attachment #2: diffs --]
[-- Type: text/plain, Size: 3796 bytes --]

2002-05-14  Andrew Cagney  <ac131313@redhat.com>

	* gdbint.texinfo (Releasing GDB): Rename ``Obsoleting any code''
	to ``Obsoleting code''.  Revise.

Index: gdbint.texinfo
===================================================================
RCS file: /cvs/src/src/gdb/doc/gdbint.texinfo,v
retrieving revision 1.84
diff -p -r1.84 gdbint.texinfo
*** gdbint.texinfo	13 May 2002 17:20:59 -0000	1.84
--- gdbint.texinfo	15 May 2002 00:17:28 -0000
*************** This means that changes such as adding a
*** 5037,5077 ****
  reason) support for a new host are considered acceptable.}
  
  
! @section Obsolete any code
  
  Before anything else, poke the other developers (and around the source
  code) to see if there is anything that can be removed from @value{GDBN}
  (an old target, an unused file).
  
  Obsolete code is identified by adding an @code{OBSOLETE} prefix to every
! line.  Doing this means that it is easy to identify obsolete code when
! grepping through the sources.
  
! The process has a number of steps and is intentionally slow --- this is
! to mainly ensure that people have had a reasonable chance to respond.
! Remember, everything on the internet takes a week.
  
! @itemize @bullet
  @item
! announce the change on @email{gdb@@sources.redhat.com, GDB mailing list}
  @item
! wait a week or so
  @item
! announce the change on @email{gdb-announce@@sources.redhat.com, GDB
! Announcement mailing list}
  @item
! wait a week or so
  @item
! go through and edit all relevant files and lines (e.g., in
! @file{configure.tgt}) so that they are prefixed with the word
! @code{OBSOLETE}.
! @end itemize
  
- @emph{Maintainer note: Removing old code, while regrettable, is a good
- thing.  Firstly it helps the developers by removing code that is either
- no longer relevant or simply wrong.  Secondly since it removes any
- history associated with the file (effectively clearing the slate) the
- developer has a much freer hand when it comes to fixing broken files.}
  
  
  @section Before the Branch
--- 5037,5086 ----
  reason) support for a new host are considered acceptable.}
  
  
! @section Obsoleting code
  
  Before anything else, poke the other developers (and around the source
  code) to see if there is anything that can be removed from @value{GDBN}
  (an old target, an unused file).
  
  Obsolete code is identified by adding an @code{OBSOLETE} prefix to every
! line.  Doing this means that it is easy to identify something that has
! been obsoleted when greping through the sources.
  
! The process is done in stages --- this is mainly to ensure that the
! wider @value{GDBN} community has a reasonable opportunity to respond.
! Remember, everything on the Internet takes a week.
  
! @enumerate
  @item
! Post the proposal on @email{gdb@@sources.redhat.com, the GDB mailing
! list} Creating a bug report to track the task's state, is also highly
! recommended.
  @item
! Wait a week or so.
  @item
! Post the proposal on @email{gdb-announce@@sources.redhat.com, the GDB
! Announcement mailing list}.
  @item
! Wait a week or so.
  @item
! Go through and edit all relevant files and lines so that they are
! prefixed with the word @code{OBSOLETE}.
! @item
! Wait until the next GDB version, containing this obsolete code, has been
! released.
! @item
! Remove the obsolete code.
! @end enumerate
! 
! @noindent
! @emph{Maintainer note: While removing old code is regrettable it is
! hopefully better for @value{GDBN}'s long term development.  Firstly it
! helps the developers by removing code that is either no longer relevant
! or simply wrong.  Secondly since it removes any history associated with
! the file (effectively clearing the slate) the developer has a much freer
! hand when it comes to fixing broken files.}
  
  
  
  @section Before the Branch

Re: [rfa/doc] Revise ``obsolete''

[Eli Zaretskii]

On Tue, 14 May 2002, Andrew Cagney wrote:

> Minor cleanup.

Okay with me.  Thanks.

Re: [rfa/doc] Revise ``obsolete''

[Andrew Cagney]

[-- Attachment #1: Type: text/plain, Size: 149 bytes --]

> On Tue, 14 May 2002, Andrew Cagney wrote:
> 
> 
>> Minor cleanup.
> 
> 
> Okay with me.  Thanks.
> 
Thanks, I've (finally) checked it in.

Andrew


[-- Attachment #2: mailbox-message://ac131313@movemail/fsf/gdb/patches/pending#684969 --]
[-- Type: message/rfc822, Size: 6647 bytes --]

[-- Attachment #2.1.1: Type: text/plain, Size: 139 bytes --]

Minor cleanup.

Main thing is to use @enumerate for the list of tasks.  That way people 
can say I'm ``Obosolete stage 4'' :-)

ok,
Andrew

[-- Attachment #2.1.2: diffs --]
[-- Type: text/plain, Size: 3796 bytes --]

2002-05-14  Andrew Cagney  <ac131313@redhat.com>

	* gdbint.texinfo (Releasing GDB): Rename ``Obsoleting any code''
	to ``Obsoleting code''.  Revise.

Index: gdbint.texinfo
===================================================================
RCS file: /cvs/src/src/gdb/doc/gdbint.texinfo,v
retrieving revision 1.84
diff -p -r1.84 gdbint.texinfo
*** gdbint.texinfo	13 May 2002 17:20:59 -0000	1.84
--- gdbint.texinfo	15 May 2002 00:17:28 -0000
*************** This means that changes such as adding a
*** 5037,5077 ****
  reason) support for a new host are considered acceptable.}
  
  
! @section Obsolete any code
  
  Before anything else, poke the other developers (and around the source
  code) to see if there is anything that can be removed from @value{GDBN}
  (an old target, an unused file).
  
  Obsolete code is identified by adding an @code{OBSOLETE} prefix to every
! line.  Doing this means that it is easy to identify obsolete code when
! grepping through the sources.
  
! The process has a number of steps and is intentionally slow --- this is
! to mainly ensure that people have had a reasonable chance to respond.
! Remember, everything on the internet takes a week.
  
! @itemize @bullet
  @item
! announce the change on @email{gdb@@sources.redhat.com, GDB mailing list}
  @item
! wait a week or so
  @item
! announce the change on @email{gdb-announce@@sources.redhat.com, GDB
! Announcement mailing list}
  @item
! wait a week or so
  @item
! go through and edit all relevant files and lines (e.g., in
! @file{configure.tgt}) so that they are prefixed with the word
! @code{OBSOLETE}.
! @end itemize
  
- @emph{Maintainer note: Removing old code, while regrettable, is a good
- thing.  Firstly it helps the developers by removing code that is either
- no longer relevant or simply wrong.  Secondly since it removes any
- history associated with the file (effectively clearing the slate) the
- developer has a much freer hand when it comes to fixing broken files.}
  
  
  @section Before the Branch
--- 5037,5086 ----
  reason) support for a new host are considered acceptable.}
  
  
! @section Obsoleting code
  
  Before anything else, poke the other developers (and around the source
  code) to see if there is anything that can be removed from @value{GDBN}
  (an old target, an unused file).
  
  Obsolete code is identified by adding an @code{OBSOLETE} prefix to every
! line.  Doing this means that it is easy to identify something that has
! been obsoleted when greping through the sources.
  
! The process is done in stages --- this is mainly to ensure that the
! wider @value{GDBN} community has a reasonable opportunity to respond.
! Remember, everything on the Internet takes a week.
  
! @enumerate
  @item
! Post the proposal on @email{gdb@@sources.redhat.com, the GDB mailing
! list} Creating a bug report to track the task's state, is also highly
! recommended.
  @item
! Wait a week or so.
  @item
! Post the proposal on @email{gdb-announce@@sources.redhat.com, the GDB
! Announcement mailing list}.
  @item
! Wait a week or so.
  @item
! Go through and edit all relevant files and lines so that they are
! prefixed with the word @code{OBSOLETE}.
! @item
! Wait until the next GDB version, containing this obsolete code, has been
! released.
! @item
! Remove the obsolete code.
! @end enumerate
! 
! @noindent
! @emph{Maintainer note: While removing old code is regrettable it is
! hopefully better for @value{GDBN}'s long term development.  Firstly it
! helps the developers by removing code that is either no longer relevant
! or simply wrong.  Secondly since it removes any history associated with
! the file (effectively clearing the slate) the developer has a much freer
! hand when it comes to fixing broken files.}
  
  
  
  @section Before the Branch