From: Tom Tromey <tom@tromey.com>
To: gdb-patches@sourceware.org
Cc: Tom Tromey <tom@tromey.com>
Subject: [RFA] Fix crash in "run" on macOS when gdb is not signed
Date: Thu, 28 Jun 2018 18:03:00 -0000 [thread overview]
Message-ID: <20180628180257.29883-1-tom@tromey.com> (raw)
On macOS, when gdb is not code-signed, it will throw an exception from
darwin_attach_pid. However, gdb also then crashes:
thread.c:93: internal-error: struct thread_info *inferior_thread(): Assertion `tp' failed.
I think the problem here is that darwin_attach_pid does not clean up
inferior_ptid and inf->pid on failure. This leads to a situation
where gdb tries to find a thread, but cannot.
In other cases, gdb would mourn the inferior at this point; but here
this is not possible because the target has not been pushed. Instead
this patch works by simply updating the inferior and inferior_ptid on
failure.
Tested by building an unsigned gdb on macOS and trying to run an
inferior.
gdb/ChangeLog
2018-06-28 Tom Tromey <tom@tromey.com>
PR cli/23340:
* darwin-nat.c (darwin_attach_pid): Reset inferior and
inferior_ptid on error.
---
gdb/ChangeLog | 6 +++
gdb/darwin-nat.c | 119 ++++++++++++++++++++++++++---------------------
2 files changed, 73 insertions(+), 52 deletions(-)
diff --git a/gdb/ChangeLog b/gdb/ChangeLog
index 417c563849a..ff4f0d9acb3 100644
--- a/gdb/ChangeLog
+++ b/gdb/ChangeLog
@@ -1,3 +1,9 @@
+2018-06-28 Tom Tromey <tom@tromey.com>
+
+ PR cli/23340:
+ * darwin-nat.c (darwin_attach_pid): Reset inferior and
+ inferior_ptid on error.
+
2018-06-28 Pedro Alves <palves@redhat.com>
* infrun.c (handle_inferior_event_1) <TARGET_WAITKIND_EXECD>:
diff --git a/gdb/darwin-nat.c b/gdb/darwin-nat.c
index 7dccce73926..6fb108846d0 100644
--- a/gdb/darwin-nat.c
+++ b/gdb/darwin-nat.c
@@ -1583,77 +1583,92 @@ darwin_attach_pid (struct inferior *inf)
darwin_inferior *priv = new darwin_inferior;
inf->priv.reset (priv);
- kret = task_for_pid (gdb_task, inf->pid, &priv->task);
- if (kret != KERN_SUCCESS)
+ TRY
{
- int status;
-
- if (!inf->attach_flag)
+ kret = task_for_pid (gdb_task, inf->pid, &priv->task);
+ if (kret != KERN_SUCCESS)
{
- kill (inf->pid, 9);
- waitpid (inf->pid, &status, 0);
- }
+ int status;
+
+ if (!inf->attach_flag)
+ {
+ kill (inf->pid, 9);
+ waitpid (inf->pid, &status, 0);
+ }
- error (_("Unable to find Mach task port for process-id %d: %s (0x%lx).\n"
+ error
+ (_("Unable to find Mach task port for process-id %d: %s (0x%lx).\n"
" (please check gdb is codesigned - see taskgated(8))"),
- inf->pid, mach_error_string (kret), (unsigned long) kret);
- }
+ inf->pid, mach_error_string (kret), (unsigned long) kret);
+ }
- inferior_debug (2, _("inferior task: 0x%x, pid: %d\n"),
- priv->task, inf->pid);
+ inferior_debug (2, _("inferior task: 0x%x, pid: %d\n"),
+ priv->task, inf->pid);
- if (darwin_ex_port == MACH_PORT_NULL)
- {
- /* Create a port to get exceptions. */
- kret = mach_port_allocate (gdb_task, MACH_PORT_RIGHT_RECEIVE,
- &darwin_ex_port);
- if (kret != KERN_SUCCESS)
- error (_("Unable to create exception port, mach_port_allocate "
- "returned: %d"),
- kret);
+ if (darwin_ex_port == MACH_PORT_NULL)
+ {
+ /* Create a port to get exceptions. */
+ kret = mach_port_allocate (gdb_task, MACH_PORT_RIGHT_RECEIVE,
+ &darwin_ex_port);
+ if (kret != KERN_SUCCESS)
+ error (_("Unable to create exception port, mach_port_allocate "
+ "returned: %d"),
+ kret);
- kret = mach_port_insert_right (gdb_task, darwin_ex_port, darwin_ex_port,
- MACH_MSG_TYPE_MAKE_SEND);
- if (kret != KERN_SUCCESS)
- error (_("Unable to create exception port, mach_port_insert_right "
- "returned: %d"),
- kret);
+ kret = mach_port_insert_right (gdb_task, darwin_ex_port,
+ darwin_ex_port,
+ MACH_MSG_TYPE_MAKE_SEND);
+ if (kret != KERN_SUCCESS)
+ error (_("Unable to create exception port, mach_port_insert_right "
+ "returned: %d"),
+ kret);
- /* Create a port set and put ex_port in it. */
- kret = mach_port_allocate (gdb_task, MACH_PORT_RIGHT_PORT_SET,
- &darwin_port_set);
+ /* Create a port set and put ex_port in it. */
+ kret = mach_port_allocate (gdb_task, MACH_PORT_RIGHT_PORT_SET,
+ &darwin_port_set);
+ if (kret != KERN_SUCCESS)
+ error (_("Unable to create port set, mach_port_allocate "
+ "returned: %d"),
+ kret);
+
+ kret = mach_port_move_member (gdb_task, darwin_ex_port,
+ darwin_port_set);
+ if (kret != KERN_SUCCESS)
+ error (_("Unable to move exception port into new port set, "
+ "mach_port_move_member\n"
+ "returned: %d"),
+ kret);
+ }
+
+ /* Create a port to be notified when the child task terminates. */
+ kret = mach_port_allocate (gdb_task, MACH_PORT_RIGHT_RECEIVE,
+ &priv->notify_port);
if (kret != KERN_SUCCESS)
- error (_("Unable to create port set, mach_port_allocate "
+ error (_("Unable to create notification port, mach_port_allocate "
"returned: %d"),
kret);
- kret = mach_port_move_member (gdb_task, darwin_ex_port, darwin_port_set);
+ kret = mach_port_move_member (gdb_task,
+ priv->notify_port, darwin_port_set);
if (kret != KERN_SUCCESS)
- error (_("Unable to move exception port into new port set, "
+ error (_("Unable to move notification port into new port set, "
"mach_port_move_member\n"
"returned: %d"),
kret);
- }
-
- /* Create a port to be notified when the child task terminates. */
- kret = mach_port_allocate (gdb_task, MACH_PORT_RIGHT_RECEIVE,
- &priv->notify_port);
- if (kret != KERN_SUCCESS)
- error (_("Unable to create notification port, mach_port_allocate "
- "returned: %d"),
- kret);
- kret = mach_port_move_member (gdb_task,
- priv->notify_port, darwin_port_set);
- if (kret != KERN_SUCCESS)
- error (_("Unable to move notification port into new port set, "
- "mach_port_move_member\n"
- "returned: %d"),
- kret);
+ darwin_setup_request_notification (inf);
- darwin_setup_request_notification (inf);
+ darwin_setup_exceptions (inf);
+ }
+ CATCH (ex, RETURN_MASK_ALL)
+ {
+ inf->pid = 0;
+ inf->priv.reset ();
+ inferior_ptid = null_ptid;
- darwin_setup_exceptions (inf);
+ throw_exception (ex);
+ }
+ END_CATCH
target_ops *darwin_ops = get_native_target ();
if (!target_is_pushed (darwin_ops))
--
2.17.1
next reply other threads:[~2018-06-28 18:03 UTC|newest]
Thread overview: 6+ messages / expand[flat|nested] mbox.gz Atom feed top
2018-06-28 18:03 Tom Tromey [this message]
2018-06-29 19:31 ` Pedro Alves
2018-07-02 15:33 ` Tom Tromey
2018-07-03 14:16 ` Pedro Alves
2018-07-04 11:46 ` Pedro Alves
2018-07-04 17:34 ` Tom Tromey
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20180628180257.29883-1-tom@tromey.com \
--to=tom@tromey.com \
--cc=gdb-patches@sourceware.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox