* [PATCHv2] gdb: Don't drop SIGSTOP during stop_all_threads
[not found] <6841cae5-f4d4-a1d4-be74-4db2718bb949@redhat.com>
@ 2018-06-14 19:46 ` Andrew Burgess
2018-06-15 12:12 ` Pedro Alves
0 siblings, 1 reply; 2+ messages in thread
From: Andrew Burgess @ 2018-06-14 19:46 UTC (permalink / raw)
To: gdb-patches; +Cc: Richard Bunt, Andrew Burgess
This is an update based on Pedro's feedback:
All of the spelling/grammar issues should have been fixed.
The actual code changes in GDB are identical.
The biggest change is in the test which I've updated to work with:
--target_board=native-extended-gdbserver
Initially once I changed from using gdb_spawn_with_cmdline_opts to
gdb_start as suggested the test hung with gdbserver, and I though that
I'd found a bug in gdbserver.
Not so, turns out I was just hitting the same issue which caused the
preload library to break GDB with v1 of my patch.
So, in this version the preload library is a little more complex. I
now try to emulate the kernels sending of SIGCHLD after a short period
of time in order to make it appear like the child thread status really
has just arrived from the kernel later than it really did. This works
better than I had hoped, with this change in place not only does the
test now pass on gdbserver, but with the preload library I can (in a
very simple test) use GDB as normal.
---
This patch fixes an issue where GDB would sometimes hang when
attaching to a multi-threaded process. This issue was especially
likely to trigger if the machine (running the inferior) was under
load.
In summary, the problem is an imbalance between two functions in
linux-nat.c, stop_callback and stop_wait_callback. In stop_callback
we send SIGSTOP to a thread, but _only_ if the thread is not already
stopped, and if it is not signalled, which means it should stop soon.
In stop_wait_callback we wait for the SIGSTOP to arrive, however, we
are aware that the thread might have been signalled for some other
reason, and so if a signal other than SIGSTOP causes the thread to
stop then we stash that signal away so it can be reported back later.
If we get a SIGSTOP then this is discarded, after all, this signal was
sent from stop_callback. Except that this might not be the case, it
could be that SIGSTOP was sent to a thread from elsewhere in GDB, in
which case we would not have sent another SIGSTOP from stop_callback
and the SIGSTOP received in stop_wait_callback should not be ignored.
Below I've laid out the exact sequence of events that I saw that lead
me to track down the above diagnosis.
After attaching to the inferior GDB sends a SIGSTOP to all of the
threads and then returns to the event loop waiting for interesting
things to happen.
Eventually the first target event is detected (this will be the first
SIGSTOP arriving) and GDB calls inferior_event_handler which calls
fetch_inferior_event. Inside fetch_inferior_event GDB calls
do_target_wait which calls target_wait to find a thread with an event.
The target_wait call ends up in linux_nat_wait_1, which first checks
to see if any threads already have stashed stop events to report, and
if there are none then we enter a loop fetching as many events as
possible out of the kernel. This event fetching is non-blocking, and
we give up once the kernel has no more events ready to give us.
All of the events from the kernel are passed through
linux_nat_filter_event which stashes the wait status for all of the
threads that reported a SIGSTOP, these will be returned by future
calls to linux_nat_wait_1.
Lets assume for a moment that we've attached to a multi-threaded
inferior, and that all but one thread has reported its stop during the
initial wait call in linux_nat_wait_1. The other thread will be
reporting a SIGSTOP, but the kernel has not yet managed to deliver
that signal to GDB before GDB gave up waiting and continued handling
the events it already had. GDB selects one of the threads that has
reported a SIGSTOP and passes this thread ID back to
fetch_inferior_event.
To handle the thread's SIGSTOP, GDB calls handle_signal_stop, which
calls stop_all_threads, this calls wait_one, which in turn calls
target_wait.
The first call to target_wait at this point will result in a stashed
wait status being returned, at which point we call setup_inferior.
The call to setup_inferior leads to a call into try_thread_db_load_1
which results in a call to linux_stop_and_wait_all_lwps. This in turn
calls stop_callback on each thread followed by stop_wait_callback on
each thread.
We're now ready to make the mistake. In stop_callback we see that our
problem thread is not stopped, but is signalled, so it should stop
soon. As a result we don't send another SIGSTOP.
We then enter stop_wait_callback, eventually the problem thread stops
with SIGSTOP which we _incorrectly_ assume came from stop_callback,
and we discard.
Once stop_wait_callback has done its damage we return from
linux_stop_and_wait_all_lwps, finish in try_thread_db_load_1, and
eventually unwind back to the call to setup_inferior in
stop_all_threads. GDB now loops around, and performs another
target_wait to get the next event from the inferior.
The target_wait calls causes us to once again reach linux_nat_wait_1,
and we pass through some code that calls resume_stopped_resumed_lwps.
This allows GDB to resume threads that are physically stopped, but
which GDB doesn't see any good reason for the thread to remain
stopped. In our case, the problem thread which had its SIGSTOP
discarded is stopped, but doesn't have a stashed wait status to
report, and so GDB sets the thread going again.
We are now stuck waiting for an event on the problem thread that might
never arrive.
When considering how to write a test for this bug I struggled. The
issue was only spotted _randomly_ when a machine was heavily loaded
with many multi-threaded applications, and GDB was being attached (by
script) to all of these applications in parallel. In one reproducer I
required around 5 applications each of 5 threads per machine core in
order to reproduce the bug 2 out of 3 times.
What we really want to do though is simulate the kernel being slow to
report events through waitpid during the initial attach. The solution
I came up with was to write an LD_PRELOAD library that intercepts
(some) waitpid calls and rate limits them to one per-second. Any more
than that simply return 0 indicating there's no event available.
Obviously this can only be applied to waitpid calls that have the
WNOHANG flag set.
Unfortunately, once you ignore a waitpid call GDB can get a bit stuck.
Usually, once the kernel has made a child status available to waitpid
GDB will be sent a SIGCHLD signal. However, if the kernel makes 5
child statuses available but, due to the preload library we only
collect one of them, then the kernel will not send any further SIGCHLD
signals, and so, when GDB, thinking that the remaining statuses have
not yet arrived sits waiting for a SIGCHLD it will be disappointed.
The solution, implemented within the preload library, is that, when we
hold back a waitpid result from GDB we spawn a new thread. This
thread delays for a short period, and then sends GDB a SIGCHLD. This
causes GDB to retry the waitpid, at which point sufficient time has
passed and our library allows the waitpid call to complete.
gdb/ChangeLog:
* linux-nat.c (stop_wait_callback): Don't discard SIGSTOP if it
was requested by GDB.
gdb/testsuite/ChangeLog:
* gdb.threads/attach-slow-waitpid.c: New file.
* gdb.threads/attach-slow-waitpid.exp: New file.
* gdb.threads/slow-waitpid.c: New file.
---
gdb/ChangeLog | 6 +
gdb/linux-nat.c | 14 +-
gdb/testsuite/ChangeLog | 7 +
gdb/testsuite/gdb.threads/attach-slow-waitpid.c | 77 +++++
gdb/testsuite/gdb.threads/attach-slow-waitpid.exp | 102 +++++++
gdb/testsuite/gdb.threads/slow-waitpid.c | 342 ++++++++++++++++++++++
6 files changed, 544 insertions(+), 4 deletions(-)
create mode 100644 gdb/testsuite/gdb.threads/attach-slow-waitpid.c
create mode 100644 gdb/testsuite/gdb.threads/attach-slow-waitpid.exp
create mode 100644 gdb/testsuite/gdb.threads/slow-waitpid.c
diff --git a/gdb/linux-nat.c b/gdb/linux-nat.c
index 445b59fa4ad..a07f41cf318 100644
--- a/gdb/linux-nat.c
+++ b/gdb/linux-nat.c
@@ -2527,17 +2527,23 @@ stop_wait_callback (struct lwp_info *lp, void *data)
}
else
{
- /* We caught the SIGSTOP that we intended to catch, so
- there's no SIGSTOP pending. */
+ /* We caught the SIGSTOP that we intended to catch. */
if (debug_linux_nat)
fprintf_unfiltered (gdb_stdlog,
"SWC: Expected SIGSTOP caught for %s.\n",
target_pid_to_str (lp->ptid));
- /* Reset SIGNALLED only after the stop_wait_callback call
- above as it does gdb_assert on SIGNALLED. */
lp->signalled = 0;
+
+ /* If we are waiting for this stop so we can report the thread
+ stopped then we need to record this status. Otherwise, we can
+ now discard this stop event. */
+ if (lp->last_resume_kind == resume_stop)
+ {
+ lp->status = status;
+ save_stop_reason (lp);
+ }
}
}
diff --git a/gdb/testsuite/gdb.threads/attach-slow-waitpid.c b/gdb/testsuite/gdb.threads/attach-slow-waitpid.c
new file mode 100644
index 00000000000..06e99ab22d1
--- /dev/null
+++ b/gdb/testsuite/gdb.threads/attach-slow-waitpid.c
@@ -0,0 +1,77 @@
+/* This testcase is part of GDB, the GNU debugger.
+
+ Copyright 2018 Free Software Foundation, Inc.
+
+ This program is free software; you can redistribute it and/or modify
+ it under the terms of the GNU General Public License as published by
+ the Free Software Foundation; either version 3 of the License, or
+ (at your option) any later version.
+
+ This program is distributed in the hope that it will be useful,
+ but WITHOUT ANY WARRANTY; without even the implied warranty of
+ MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ GNU General Public License for more details.
+
+ You should have received a copy of the GNU General Public License
+ along with this program. If not, see <http://www.gnu.org/licenses/>. */
+
+#include <pthread.h>
+#include <stdio.h>
+#include <stdlib.h>
+#include <assert.h>
+#define NUM_THREADS 4
+
+/* Crude spin lock. Threads all spin until this is set to 0. */
+int go = 1;
+
+/* Thread function, just spin until GO is set to 0. */
+void *
+perform_work (void *argument)
+{
+ /* Cast to volatile to ensure that ARGUMENT is loaded each time around
+ the loop. */
+ while (*((volatile int*) argument))
+ {
+ /* Nothing. */
+ }
+ return NULL;
+}
+
+/* The spin loop for the main thread. */
+void
+function (void)
+{
+ (void) perform_work (&go);
+ printf ("Finished from function\n");
+}
+
+/* Main program, create some threads which all spin waiting for GO to be
+ set to 0. */
+int
+main (void)
+{
+ pthread_t threads[NUM_THREADS];
+ int result_code;
+ unsigned index;
+
+ /* Create some threads. */
+ for (index = 0; index < NUM_THREADS; ++index)
+ {
+ printf ("In main: creating thread %d\n", index);
+ result_code = pthread_create (&threads[index], NULL, perform_work, &go);
+ assert (!result_code);
+ }
+
+ function ();
+
+ /* Wait for each thread to complete. */
+ for (index = 0; index < NUM_THREADS; ++index)
+ {
+ /* Block until thread INDEX completes. */
+ result_code = pthread_join (threads[index], NULL);
+ assert (!result_code);
+ printf ("In main: thread %d has completed\n", index);
+ }
+ printf ("In main: All threads completed successfully\n");
+ return 0;
+}
diff --git a/gdb/testsuite/gdb.threads/attach-slow-waitpid.exp b/gdb/testsuite/gdb.threads/attach-slow-waitpid.exp
new file mode 100644
index 00000000000..37230a5d76f
--- /dev/null
+++ b/gdb/testsuite/gdb.threads/attach-slow-waitpid.exp
@@ -0,0 +1,102 @@
+# Copyright 2018 Free Software Foundation, Inc.
+#
+# This program is free software; you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation; either version 3 of the License, or
+# (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program. If not, see <http://www.gnu.org/licenses/>.
+
+# This test script tries to expose a bug in some of the uses of
+# waitpid in the Linux native support within GDB. The problem was
+# spotted on systems which were heavily loaded when attaching to
+# threaded test programs. What happened was that during the initial
+# attach, the loop of waitpid calls that normally received the stop
+# events from each of the threads in the inferior was not receiving a
+# stop event for some threads (the kernel just hadn't sent the stop
+# event yet).
+#
+# GDB would then trigger a call to stop_all_threads which would
+# continue to wait for all of the outstanding threads to stop, when
+# the outstanding stop events finally arrived GDB would then
+# (incorrectly) discard the stop event, resume the thread, and
+# continue to wait for the thread to stop.... which it now never
+# would.
+#
+# In order to try and expose this issue reliably, this test preloads a
+# library that intercepts waitpid calls. All waitpid calls targeting
+# pid -1 with the WNOHANG flag are rate limited so that only 1 per
+# second can complete. Additional calls are forced to return 0
+# indicating no event waiting. This is enough to trigger the bug
+# during the attach phase, however, it breaks the rest of GDB's
+# behaviour, so we can't do more than attach with this library in
+# place.
+
+# This test only works on Linux
+if { ![isnative] || [is_remote host] || [use_gdb_stub]
+ || ![istarget *-linux*] } {
+ continue
+}
+
+standard_testfile
+
+set libfile slow-waitpid
+set libsrc "${srcdir}/${subdir}/${libfile}.c"
+set libobj [standard_output_file ${libfile}.so]
+
+with_test_prefix "compile preload library" {
+ # Compile the preload library. We only get away with this as we
+ # limit this test to running when ISNATIVE is true.
+ if { [gdb_compile_shlib_pthreads \
+ $libsrc $libobj {debug}] != "" } then {
+ return -1
+ }
+}
+
+with_test_prefix "compile test executable" {
+ # Compile the test program
+ if { [gdb_compile_pthreads \
+ "${srcdir}/${subdir}/${srcfile}" "${binfile}" \
+ executable {debug}] != "" } {
+ return -1
+ }
+}
+
+# Spawn GDB with LIB preloaded with LD_PRELOAD.
+
+proc gdb_spawn_with_ld_preload {lib} {
+ global env
+
+ save_vars { env(LD_PRELOAD) } {
+ if { ![info exists env(LD_PRELOAD) ]
+ || $env(LD_PRELOAD) == "" } {
+ set env(LD_PRELOAD) "$lib"
+ } else {
+ append env(LD_PRELOAD) ":$lib"
+ }
+
+ gdb_start
+ }
+}
+
+# Run test program in the background.
+set test_spawn_id [spawn_wait_for_attach $binfile]
+set testpid [spawn_id_get_pid $test_spawn_id]
+
+# Start GDB with preload library in place.
+gdb_spawn_with_ld_preload $libobj
+
+# Load binary, and attach to running program.
+gdb_load ${binfile}
+gdb_test "attach $testpid" "Attaching to program.*" "attach to target"
+
+gdb_exit
+
+# Kill of test program.
+kill_wait_spawned_process $test_spawn_id
diff --git a/gdb/testsuite/gdb.threads/slow-waitpid.c b/gdb/testsuite/gdb.threads/slow-waitpid.c
new file mode 100644
index 00000000000..e2498fbf727
--- /dev/null
+++ b/gdb/testsuite/gdb.threads/slow-waitpid.c
@@ -0,0 +1,342 @@
+/* This testcase is part of GDB, the GNU debugger.
+
+ Copyright 2018 Free Software Foundation, Inc.
+
+ This program is free software; you can redistribute it and/or modify
+ it under the terms of the GNU General Public License as published by
+ the Free Software Foundation; either version 3 of the License, or
+ (at your option) any later version.
+
+ This program is distributed in the hope that it will be useful,
+ but WITHOUT ANY WARRANTY; without even the implied warranty of
+ MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ GNU General Public License for more details.
+
+ You should have received a copy of the GNU General Public License
+ along with this program. If not, see <http://www.gnu.org/licenses/>. */
+
+/* This file contains a library that can be preloaded into GDB on Linux
+ using the LD_PRELOAD technique.
+
+ The library intercepts calls to WAITPID and SIGSUSPEND in order to
+ simulate the behaviour of a heavily loaded kernel.
+
+ When GDB wants to stop all threads in an inferior each thread is sent a
+ SIGSTOP, GDB will then wait for the signal to be received by the thread
+ with a waitpid call.
+
+ If the kernel is slow in either delivering the signal, or making the
+ result available to the waitpid call then GDB will enter a sigsuspend
+ call in order to wait for the inferior threads to change state, this is
+ signalled to GDB with a SIGCHLD.
+
+ A bug in GDB meant that in some cases we would deadlock during this
+ process. This was rarely seen as the kernel is usually quick at
+ delivering signals and making the results available to waitpid, so quick
+ that GDB would gather the statuses from all inferior threads in the
+ original pass.
+
+ The idea in this library is to rate limit calls to waitpid (where pid is
+ -1 and the WNOHANG option is set) so that only 1 per second can return
+ an answer. Any additional calls will report that no threads are
+ currently ready. This should match the behaviour we see on a slow
+ kernel.
+
+ However, given that usually when using this library, the kernel does
+ have the waitpid result ready this means that the kernel will never send
+ GDB a SIGCHLD. This means that when GDB enters sigsuspend it will block
+ forever. Alternatively, if GDB enters it's polling loop the lack of
+ SIGCHLD means that we will never see an event on the child threads. To
+ resolve these problems the library intercepts calls to sigsuspend and
+ forces the call to exit if there is a pending waitpid result. Also,
+ when we know that there's a waitpid result that we've ignored, we create
+ a new thread which, after a short delay, will send GDB a SIGCHLD. */
+
+#define _GNU_SOURCE
+
+#include <sys/types.h>
+#include <sys/wait.h>
+#include <sys/time.h>
+#include <stdlib.h>
+#include <stdio.h>
+#include <dlfcn.h>
+#include <string.h>
+#include <stdarg.h>
+#include <signal.h>
+#include <errno.h>
+#include <pthread.h>
+#include <unistd.h>
+
+/* Logging. */
+
+static void
+log_msg (const char *fmt, ...)
+{
+#ifdef LOGGING
+ va_list ap;
+
+ va_start (ap, fmt);
+ vfprintf (stderr, fmt, ap);
+ va_end (ap);
+#endif /* LOGGING */
+}
+
+/* Error handling, message and exit. */
+
+static void
+error (const char *fmt, ...)
+{
+ va_list ap;
+
+ va_start (ap, fmt);
+ vfprintf (stderr, fmt, ap);
+ va_end (ap);
+
+ exit (EXIT_FAILURE);
+}
+
+/* Cache the result of a waitpid call that has not been reported back to
+ GDB yet. We only ever cache a single result. Once we have a result
+ cached then later calls to waitpid with the WNOHANG option will return a
+ result of 0. */
+
+struct
+{
+ /* Flag to indicate when we have a result cached. */
+ int cached_p;
+
+ /* The cached result fields from a waitpid call. */
+ pid_t pid;
+ int wstatus;
+} cached_wait_status;
+
+/* Lock to hold when modifying SIGNAL_THREAD_ACTIVE_P. */
+
+pthread_mutex_t thread_creation_lock_obj = PTHREAD_MUTEX_INITIALIZER;
+#define thread_creation_lock (&thread_creation_lock_obj)
+
+/* This flag is only modified while holding the THREAD_CREATION_LOCK mutex.
+ When this flag is true then there is a signal thread alive that will be
+ sending a SIGCHLD at some point in the future. */
+
+int signal_thread_active_p;
+
+/* When we last allowed a waitpid to complete. */
+
+static struct timeval last_waitpid_time = { 0, 0 };
+
+/* The number of seconds that must elapse between calls to waitpid where
+ the pid is -1 and the WNOHANG option is set. If calls occur faster than
+ this then we force a result of 0 to be returned from waitpid. */
+
+#define WAITPID_MIN_TIME (1)
+
+/* Return true (non-zero) if we should skip this call to waitpid, or false
+ (zero) if this waitpid call should be handled with a call to the "real"
+ waitpid library. Allows 1 waitpid call per second. */
+
+static int
+should_skip_waitpid (void)
+{
+ struct timeval *tv = &last_waitpid_time;
+ if (tv->tv_sec == 0)
+ {
+ if (gettimeofday (tv, NULL) < 0)
+ error ("error: gettimeofday failed\n");
+ return 0; /* Don't skip. */
+ }
+ else
+ {
+ struct timeval new_tv;
+
+ if (gettimeofday (&new_tv, NULL) < 0)
+ error ("error: gettimeofday failed\n");
+
+ if ((new_tv.tv_sec - tv->tv_sec) < WAITPID_MIN_TIME)
+ return 1; /* Skip. */
+
+ *tv = new_tv;
+ }
+
+ /* Don't skip. */
+ return 0;
+}
+
+/* Perform a real waitpid call. */
+
+static pid_t
+real_waitpid (pid_t pid, int *wstatus, int options)
+{
+ typedef pid_t (*fptr_t) (pid_t, int *, int);
+ static fptr_t real_func = NULL;
+
+ if (real_func == NULL)
+ {
+ real_func = dlsym (RTLD_NEXT, "waitpid");
+ if (real_func == NULL)
+ error ("error: failed to find real waitpid\n");
+ }
+
+ return (*real_func) (pid, wstatus, options);
+}
+
+/* Thread worked created when we cached a waitpid result. Delays for
+ a short period of time and then sends SIGCHLD to the GDB process. This
+ should trigger GDB to call waitpid again, at which point we will make
+ the cached waitpid result available. */
+
+static void*
+send_sigchld_thread (void *arg)
+{
+ /* Delay one second longer than WAITPID_MIN_TIME so that there can be no
+ chance that a call to SHOULD_SKIP_WAITPID will return true one the
+ SIGCHLD is delivered and handled. */
+ sleep (WAITPID_MIN_TIME + 1);
+
+ pthread_mutex_lock (thread_creation_lock);
+ signal_thread_active_p = 0;
+
+ if (cached_wait_status.cached_p)
+ {
+ log_msg ("signal-thread: sending SIGCHLD\n");
+ kill (getpid (), SIGCHLD);
+ }
+
+ pthread_mutex_unlock (thread_creation_lock);
+ return NULL;
+}
+
+/* The waitpid entry point function. */
+
+pid_t
+waitpid (pid_t pid, int *wstatus, int options)
+{
+ log_msg ("waitpid: waitpid (%d, %p, 0x%x)\n", pid, wstatus, options);
+
+ if ((options & WNOHANG) != 0
+ && pid == -1
+ && should_skip_waitpid ())
+ {
+ if (!cached_wait_status.cached_p)
+ {
+ /* Do the waitpid call, but hold the result back. */
+ pid_t tmp_pid;
+ int tmp_wstatus;
+
+ tmp_pid = real_waitpid (-1, &tmp_wstatus, options);
+ if (tmp_pid > 0)
+ {
+ log_msg ("waitpid: delaying waitpid result (pid = %d)\n",
+ tmp_pid);
+
+ /* Cache the result. */
+ cached_wait_status.pid = tmp_pid;
+ cached_wait_status.wstatus = tmp_wstatus;
+ cached_wait_status.cached_p = 1;
+
+ /* Is there a thread around that will be sending a signal in
+ the near future? The prevents us from creating one
+ thread per call to waitpid when the calls occur in a
+ sequence. */
+ pthread_mutex_lock (thread_creation_lock);
+ if (!signal_thread_active_p)
+ {
+ sigset_t old_ss, new_ss;
+ pthread_t thread_id;
+ pthread_attr_t attr;
+
+ /* Create the new signal sending thread in detached
+ state. This means that the thread doesn't need to be
+ pthread_join'ed. Which is fine as there's no result
+ we care about. */
+ pthread_attr_init (&attr);
+ pthread_attr_setdetachstate (&attr, PTHREAD_CREATE_DETACHED);
+
+ /* Ensure the signal sending thread has all signals
+ blocked. We don't want any signals to GDB to be
+ handled in that thread. */
+ sigfillset (&new_ss);
+ sigprocmask (SIG_BLOCK, &new_ss, &old_ss);
+
+ log_msg ("waitpid: spawn thread to signal us\n");
+ if (pthread_create (&thread_id, &attr,
+ send_sigchld_thread, NULL) != 0)
+ error ("error: pthread_create failed\n");
+
+ signal_thread_active_p = 1;
+ sigprocmask (SIG_SETMASK, &old_ss, NULL);
+ pthread_attr_destroy (&attr);
+ }
+
+ pthread_mutex_unlock (thread_creation_lock);
+ }
+ }
+
+ log_msg ("waitpid: skipping\n");
+ return 0;
+ }
+
+ /* If we have a cached result that is a suitable reply for this call to
+ waitpid then send that cached result back now. */
+ if (cached_wait_status.cached_p
+ && (pid == -1 || pid == cached_wait_status.pid))
+ {
+ pid_t pid;
+
+ pid = cached_wait_status.pid;
+ log_msg ("waitpid: return cached result (%d)\n", pid);
+ *wstatus = cached_wait_status.wstatus;
+ cached_wait_status.cached_p = 0;
+ return pid;
+ }
+
+ log_msg ("waitpid: real waitpid call\n");
+ return real_waitpid (pid, wstatus, options);
+}
+
+/* Perform a real sigsuspend call. */
+
+static int
+real_sigsuspend (const sigset_t *mask)
+{
+ typedef int (*fptr_t) (const sigset_t *);
+ static fptr_t real_func = NULL;
+
+ if (real_func == NULL)
+ {
+ real_func = dlsym (RTLD_NEXT, "sigsuspend");
+ if (real_func == NULL)
+ error ("error: failed to find real sigsuspend\n");
+ }
+
+ return (*real_func) (mask);
+}
+
+/* The sigsuspend entry point function. */
+
+int
+sigsuspend (const sigset_t *mask)
+{
+ log_msg ("sigsuspend: sigsuspend (0x%p)\n", ((void *) mask));
+
+ /* If SIGCHLD is _not_ in MASK, and is therefore deliverable, then if we
+ have a pending wait status pretend that a signal arrived. We will
+ have a thread alive that is going to deliver a signal but doing this
+ will boost the speed as we don't have to wait for a signal. If the
+ signal ends up being delivered then it should be harmless, we'll just
+ perform an additional waitpid call. */
+ if (!sigismember (mask, SIGCHLD))
+ {
+ if (cached_wait_status.cached_p)
+ {
+ log_msg ("sigsuspend: interrupt for cached waitstatus\n");
+ last_waitpid_time.tv_sec = 0;
+ last_waitpid_time.tv_usec = 0;
+ errno = EINTR;
+ return -1;
+ }
+ }
+
+ log_msg ("sigsuspend: real sigsuspend call\n");
+ return real_sigsuspend (mask);
+}
--
2.14.3
^ permalink raw reply [flat|nested] 2+ messages in thread