Mirror of the gdb-patches mailing list
 help / color / mirror / Atom feed
* Spelling fixes
@ 2011-06-03 18:03 Stephen Kitt
  2011-06-03 23:52 ` Joel Brobecker
  0 siblings, 1 reply; 3+ messages in thread
From: Stephen Kitt @ 2011-06-03 18:03 UTC (permalink / raw)
  To: gdb-patches

Hi,

The Lintian package validation tool in Debian picked up a few spelling
mistakes in gdb. The following patch fixes these mistakes:
* "suppported" becomes "supported"
* "specifed" becomes "specified"
* "reenabled" becomes "re-enabled"
* "registraration" becomes "registration"
* "conjuction" becomes "conjunction"

Regards,

Stephen

diff -ur upstream.orig/gdb/breakpoint.c upstream/gdb/breakpoint.c
--- upstream.orig/gdb/breakpoint.c	2010-07-28 20:00:02.000000000 +0200
+++ upstream/gdb/breakpoint.c	2011-06-03 19:46:13.681085293 +0200
@@ -11606,7 +11606,7 @@
 Disable some breakpoints.\n\
 Arguments are breakpoint numbers with spaces in between.\n\
 To disable all breakpoints, give no argument.\n\
-A disabled breakpoint is not forgotten, but has no effect until reenabled."),
+A disabled breakpoint is not forgotten, but has no effect until re-enabled."),
 		  &disablelist, "disable ", 1, &cmdlist);
   add_com_alias ("dis", "disable", class_breakpoint, 1);
   add_com_alias ("disa", "disable", class_breakpoint, 1);
@@ -11615,13 +11615,13 @@
 Disable some breakpoints.\n\
 Arguments are breakpoint numbers with spaces in between.\n\
 To disable all breakpoints, give no argument.\n\
-A disabled breakpoint is not forgotten, but has no effect until reenabled."));
+A disabled breakpoint is not forgotten, but has no effect until re-enabled."));
 
   add_cmd ("breakpoints", class_alias, disable_command, _("\
 Disable some breakpoints.\n\
 Arguments are breakpoint numbers with spaces in between.\n\
 To disable all breakpoints, give no argument.\n\
-A disabled breakpoint is not forgotten, but has no effect until reenabled.\n\
+A disabled breakpoint is not forgotten, but has no effect until re-enabled.\n\
 This command may be abbreviated \"disable\"."),
 	   &disablelist);
 
diff -ur upstream.orig/gdb/breakpoint.h upstream/gdb/breakpoint.h
--- upstream.orig/gdb/breakpoint.h	2010-07-01 12:36:09.000000000 +0200
+++ upstream/gdb/breakpoint.h	2011-06-03 19:46:13.705084951 +0200
@@ -898,7 +898,7 @@
 
 /* These functions respectively disable or reenable all currently
    enabled watchpoints.  When disabled, the watchpoints are marked
-   call_disabled.  When reenabled, they are marked enabled.
+   call_disabled.  When re-enabled, they are marked enabled.
 
    The intended client of these functions is call_function_by_hand.
 
@@ -912,7 +912,7 @@
    and that can cause execution control to become very confused.
 
    Note that if a user sets breakpoints in an interactively called
-   function, the call_disabled watchpoints will have been reenabled
+   function, the call_disabled watchpoints will have been re-enabled
    when the first such breakpoint is reached.  However, on targets
    that are unable to unwind through the call dummy frame, watches
    of stack-based storage may then be deleted, because gdb will
diff -ur upstream.orig/gdb/ChangeLog-2003 upstream/gdb/ChangeLog-2003
--- upstream.orig/gdb/ChangeLog-2003	2004-01-02 14:01:24.000000000 +0100
+++ upstream/gdb/ChangeLog-2003	2011-06-03 19:48:47.494898729 +0200
@@ -9601,7 +9601,7 @@
 	stack size.  Don't loop infinitely if ``stack_len'' is zero.
 	(execute_stack_op): Move ``ctx->in_reg'' initialization
 	out of loop.  Allow DW_OP_reg0 ... DW_OP_reg31 and DW_OP_regx to
-	be used in conjuction with DW_OP_piece.  Revise error message
+	be used in conjunction with DW_OP_piece.  Revise error message
 	accordingly.
 
 2003-05-14  Theodore A. Roth  <troth@openavr.org>
diff -ur upstream.orig/gdb/cli/cli-dump.c upstream/gdb/cli/cli-dump.c
--- upstream.orig/gdb/cli/cli-dump.c	2010-05-17 21:28:12.000000000 +0200
+++ upstream/gdb/cli/cli-dump.c	2011-06-03 19:45:22.573811853 +0200
@@ -682,7 +682,7 @@
   add_dump_command ("memory", dump_memory_command, "\
 Write contents of memory to a raw binary file.\n\
 Arguments are FILE START STOP.  Writes the contents of memory within the\n\
-range [START .. STOP) to the specifed FILE in raw target ordered bytes.");
+range [START .. STOP) to the specified FILE in raw target ordered bytes.");
 
   add_dump_command ("value", dump_value_command, "\
 Write the value of an expression to a raw binary file.\n\
@@ -722,7 +722,7 @@
   add_cmd ("memory", all_commands, dump_srec_memory, _("\
 Write contents of memory to an srec file.\n\
 Arguments are FILE START STOP.  Writes the contents of memory\n\
-within the range [START .. STOP) to the specifed FILE in srec format."),
+within the range [START .. STOP) to the specified FILE in srec format."),
 	   &srec_cmdlist);
 
   add_cmd ("value", all_commands, dump_srec_value, _("\
@@ -734,7 +734,7 @@
   add_cmd ("memory", all_commands, dump_ihex_memory, _("\
 Write contents of memory to an ihex file.\n\
 Arguments are FILE START STOP.  Writes the contents of memory within\n\
-the range [START .. STOP) to the specifed FILE in intel hex format."),
+the range [START .. STOP) to the specified FILE in intel hex format."),
 	   &ihex_cmdlist);
 
   add_cmd ("value", all_commands, dump_ihex_value, _("\
@@ -746,7 +746,7 @@
   add_cmd ("memory", all_commands, dump_tekhex_memory, _("\
 Write contents of memory to a tekhex file.\n\
 Arguments are FILE START STOP.  Writes the contents of memory\n\
-within the range [START .. STOP) to the specifed FILE in tekhex format."),
+within the range [START .. STOP) to the specified FILE in tekhex format."),
 	   &tekhex_cmdlist);
 
   add_cmd ("value", all_commands, dump_tekhex_value, _("\
@@ -758,7 +758,7 @@
   add_cmd ("memory", all_commands, dump_binary_memory, _("\
 Write contents of memory to a raw binary file.\n\
 Arguments are FILE START STOP.  Writes the contents of memory\n\
-within the range [START .. STOP) to the specifed FILE in binary format."),
+within the range [START .. STOP) to the specified FILE in binary format."),
 	   &binary_dump_cmdlist);
 
   add_cmd ("value", all_commands, dump_binary_value, _("\
@@ -770,7 +770,7 @@
   add_cmd ("memory", all_commands, append_binary_memory, _("\
 Append contents of memory to a raw binary file.\n\
 Arguments are FILE START STOP.  Writes the contents of memory within the\n\
-range [START .. STOP) to the specifed FILE in raw target ordered bytes."),
+range [START .. STOP) to the specified FILE in raw target ordered bytes."),
 	   &binary_append_cmdlist);
 
   add_cmd ("value", all_commands, append_binary_value, _("\
diff -ur upstream.orig/gdb/dwarf2expr.c upstream/gdb/dwarf2expr.c
--- upstream.orig/gdb/dwarf2expr.c	2010-07-07 20:50:57.000000000 +0200
+++ upstream/gdb/dwarf2expr.c	2011-06-03 19:48:47.226902540 +0200
@@ -323,7 +323,7 @@
      checked at the other place that this function is called.  */
   if (op_ptr != op_end && *op_ptr != DW_OP_piece && *op_ptr != DW_OP_bit_piece)
     error (_("DWARF-2 expression error: `%s' operations must be "
-	     "used either alone or in conjuction with DW_OP_piece "
+	     "used either alone or in conjunction with DW_OP_piece "
 	     "or DW_OP_bit_piece."),
 	   op_name);
 }
@@ -491,7 +491,7 @@
 	      && *op_ptr != DW_OP_bit_piece
 	      && *op_ptr != DW_OP_GNU_uninit)
 	    error (_("DWARF-2 expression error: DW_OP_reg operations must be "
-		     "used either alone or in conjuction with DW_OP_piece "
+		     "used either alone or in conjunction with DW_OP_piece "
 		     "or DW_OP_bit_piece."));
 
 	  result = op - DW_OP_reg0;
diff -ur upstream.orig/gdb/gdbarch.c upstream/gdb/gdbarch.c
--- upstream.orig/gdb/gdbarch.c	2010-07-06 14:56:22.000000000 +0200
+++ upstream/gdb/gdbarch.c	2011-06-03 19:47:52.675678002 +0200
@@ -3961,7 +3961,7 @@
     {
       if (bfd_architecture == (*curr)->bfd_architecture)
 	internal_error (__FILE__, __LINE__,
-                        _("gdbarch: Duplicate registraration of architecture (%s)"),
+                        _("gdbarch: Duplicate registration of architecture (%s)"),
 	                bfd_arch_info->printable_name);
     }
   /* log it */
diff -ur upstream.orig/gdb/gdbarch.sh upstream/gdb/gdbarch.sh
--- upstream.orig/gdb/gdbarch.sh	2010-07-06 14:56:23.000000000 +0200
+++ upstream/gdb/gdbarch.sh	2011-06-03 19:47:52.707677546 +0200
@@ -1931,7 +1931,7 @@
     {
       if (bfd_architecture == (*curr)->bfd_architecture)
 	internal_error (__FILE__, __LINE__,
-                        _("gdbarch: Duplicate registraration of architecture (%s)"),
+                        _("gdbarch: Duplicate registration of architecture (%s)"),
 	                bfd_arch_info->printable_name);
     }
   /* log it */
diff -ur upstream.orig/gdb/po/gdb.pot upstream/gdb/po/gdb.pot
--- upstream.orig/gdb/po/gdb.pot	2010-09-03 01:45:24.000000000 +0200
+++ upstream/gdb/po/gdb.pot	2011-06-03 19:48:47.798894409 +0200
@@ -3173,7 +3173,7 @@
 "Disable some breakpoints.\n"
 "Arguments are breakpoint numbers with spaces in between.\n"
 "To disable all breakpoints, give no argument.\n"
-"A disabled breakpoint is not forgotten, but has no effect until reenabled."
+"A disabled breakpoint is not forgotten, but has no effect until re-enabled."
 msgstr ""
 
 #: breakpoint.c:11620
@@ -3181,7 +3181,7 @@
 "Disable some breakpoints.\n"
 "Arguments are breakpoint numbers with spaces in between.\n"
 "To disable all breakpoints, give no argument.\n"
-"A disabled breakpoint is not forgotten, but has no effect until reenabled.\n"
+"A disabled breakpoint is not forgotten, but has no effect until re-enabled.\n"
 "This command may be abbreviated \"disable\"."
 msgstr ""
 
@@ -4444,7 +4444,7 @@
 msgid ""
 "Write contents of memory to an srec file.\n"
 "Arguments are FILE START STOP.  Writes the contents of memory\n"
-"within the range [START .. STOP) to the specifed FILE in srec format."
+"within the range [START .. STOP) to the specified FILE in srec format."
 msgstr ""
 
 #: cli/cli-dump.c:728
@@ -4458,7 +4458,7 @@
 msgid ""
 "Write contents of memory to an ihex file.\n"
 "Arguments are FILE START STOP.  Writes the contents of memory within\n"
-"the range [START .. STOP) to the specifed FILE in intel hex format."
+"the range [START .. STOP) to the specified FILE in intel hex format."
 msgstr ""
 
 #: cli/cli-dump.c:740
@@ -4472,7 +4472,7 @@
 msgid ""
 "Write contents of memory to a tekhex file.\n"
 "Arguments are FILE START STOP.  Writes the contents of memory\n"
-"within the range [START .. STOP) to the specifed FILE in tekhex format."
+"within the range [START .. STOP) to the specified FILE in tekhex format."
 msgstr ""
 
 #: cli/cli-dump.c:752
@@ -4486,7 +4486,7 @@
 msgid ""
 "Write contents of memory to a raw binary file.\n"
 "Arguments are FILE START STOP.  Writes the contents of memory\n"
-"within the range [START .. STOP) to the specifed FILE in binary format."
+"within the range [START .. STOP) to the specified FILE in binary format."
 msgstr ""
 
 #: cli/cli-dump.c:764
@@ -4500,7 +4500,7 @@
 msgid ""
 "Append contents of memory to a raw binary file.\n"
 "Arguments are FILE START STOP.  Writes the contents of memory within the\n"
-"range [START .. STOP) to the specifed FILE in raw target ordered bytes."
+"range [START .. STOP) to the specified FILE in raw target ordered bytes."
 msgstr ""
 
 #: cli/cli-dump.c:776
@@ -6443,7 +6443,7 @@
 #, possible-c-format
 msgid ""
 "DWARF-2 expression error: `%s' operations must be used either alone or in "
-"conjuction with DW_OP_piece or DW_OP_bit_piece."
+"conjunction with DW_OP_piece or DW_OP_bit_piece."
 msgstr ""
 
 #: dwarf2expr.c:347
@@ -6454,7 +6454,7 @@
 #: dwarf2expr.c:493
 msgid ""
 "DWARF-2 expression error: DW_OP_reg operations must be used either alone or "
-"in conjuction with DW_OP_piece or DW_OP_bit_piece."
+"in conjunction with DW_OP_piece or DW_OP_bit_piece."
 msgstr ""
 
 #: dwarf2expr.c:515 dwarf2loc.c:1401
@@ -8149,7 +8149,7 @@
 
 #: gdbarch.c:3964
 #, possible-c-format
-msgid "gdbarch: Duplicate registraration of architecture (%s)"
+msgid "gdbarch: Duplicate registration of architecture (%s)"
 msgstr ""
 
 #: gdbarch.c:4152
diff -ur upstream.orig/gdb/remote.c upstream/gdb/remote.c
--- upstream.orig/gdb/remote.c	2010-07-28 22:20:12.000000000 +0200
+++ upstream/gdb/remote.c	2011-06-03 19:39:06.815154369 +0200
@@ -6159,14 +6159,14 @@
 	  {
 	    if (remote_debug)
 	      fprintf_unfiltered (gdb_stdlog,
-				  "binary downloading NOT suppported by target\n");
+				  "binary downloading NOT supported by target\n");
 	    remote_protocol_packets[PACKET_X].support = PACKET_DISABLE;
 	  }
 	else
 	  {
 	    if (remote_debug)
 	      fprintf_unfiltered (gdb_stdlog,
-				  "binary downloading suppported by target\n");
+				  "binary downloading supported by target\n");
 	    remote_protocol_packets[PACKET_X].support = PACKET_ENABLE;
 	  }
 	break;
diff -ur upstream.orig/gdb/testsuite/gdb.base/help.exp upstream/gdb/testsuite/gdb.base/help.exp
--- upstream.orig/gdb/testsuite/gdb.base/help.exp	2010-07-28 01:21:07.000000000 +0200
+++ upstream/gdb/testsuite/gdb.base/help.exp	2011-06-03 19:46:13.541087282 +0200
@@ -38,9 +38,9 @@
 # test help append
 gdb_test "help append" "Append target code/data to a local file\.\[\r\n\]+List of append subcommands:.*" 
 gdb_test "help append binary" "Append target code/data to a raw binary file\.\[\r\n\]+List of append binary subcommands:.*" 
-gdb_test "help append memory" "Append contents of memory to a raw binary file\.\[\r\n\]+Arguments are FILE START STOP\.  Writes the contents of memory within the\[\r\n\]+range \\\[START \.\. STOP\\) to the specifed FILE in raw target ordered bytes\." 
+gdb_test "help append memory" "Append contents of memory to a raw binary file\.\[\r\n\]+Arguments are FILE START STOP\.  Writes the contents of memory within the\[\r\n\]+range \\\[START \.\. STOP\\) to the specified FILE in raw target ordered bytes\." 
 gdb_test "help append value" "Append the value of an expression to a raw binary file\.\[\r\n\]+Arguments are FILE EXPRESSION\.  Writes the value of EXPRESSION to\[\r\n\]+the specified FILE in raw target ordered bytes\." 
-gdb_test "help append binary memory" "Append contents of memory to a raw binary file\.\[\r\n\]+Arguments are FILE START STOP\.  Writes the contents of memory within the\[\r\n\]+range \\\[START \.\. STOP\\) to the specifed FILE in raw target ordered bytes\." 
+gdb_test "help append binary memory" "Append contents of memory to a raw binary file\.\[\r\n\]+Arguments are FILE START STOP\.  Writes the contents of memory within the\[\r\n\]+range \\\[START \.\. STOP\\) to the specified FILE in raw target ordered bytes\." 
 gdb_test "help append binary value" "Append the value of an expression to a raw binary file\.\[\r\n\]+Arguments are FILE EXPRESSION\.  Writes the value of EXPRESSION\[\r\n\]+to the specified FILE in raw target ordered bytes\." 
 # test help attach
 gdb_test "help attach" "Attach to a process or file outside of GDB\.\[\r\n\]+This command attaches to another target, of the same type as your last\[\r\n\]+\"target\" command \\(\"info files\" will show your target stack\\)\.\[\r\n\]+The command may take as argument a process id or a device file\.\[\r\n\]+For a process id, you must have permission to send the process a signal,\[\r\n\]+and it must have the same effective uid as the debugger\.\[\r\n\]+When using \"attach\" with a process id, the debugger finds the\[\r\n\]+program running in the process, looking first in the current working\[\r\n\]+directory, or \\(if not found there\\) using the source file search path\[\r\n\]+\\(see the \"directory\" command\\)\.  You can also use the \"file\" command\[\r\n\]+to specify the program, and to load its symbol table\." "help attach"
@@ -110,7 +110,7 @@
     "Disable some breakpoints\.\[\r\n\]+"
     "Arguments are breakpoint numbers with spaces in between\.\[\r\n\]+"
     "To disable all breakpoints, give no argument\.\[\r\n\]+"
-    "A disabled breakpoint is not forgotten, but has no effect until reenabled\.\[\r\n\]+"
+    "A disabled breakpoint is not forgotten, but has no effect until re-enabled\.\[\r\n\]+"
 }
 test_prefix_command_help {"dis" "disable"} $expected_help_disable "help disable \"dis\" abbreviation"
 # test help disable "disa" abbreviation
@@ -118,7 +118,7 @@
 # test help disable
 test_prefix_command_help "disable" $expected_help_disable
 # test help disable breakpoints
-gdb_test "help disable breakpoints" "Disable some breakpoints\.\[\r\n\]+Arguments are breakpoint numbers with spaces in between\.\[\r\n\]+To disable all breakpoints, give no argument\.\[\r\n\]+A disabled breakpoint is not forgotten, but has no effect until reenabled\.\[\r\n\]+This command may be abbreviated \"disable\"." "help disable breakpoints"
+gdb_test "help disable breakpoints" "Disable some breakpoints\.\[\r\n\]+Arguments are breakpoint numbers with spaces in between\.\[\r\n\]+To disable all breakpoints, give no argument\.\[\r\n\]+A disabled breakpoint is not forgotten, but has no effect until re-enabled\.\[\r\n\]+This command may be abbreviated \"disable\"." "help disable breakpoints"
 # test help disable display
 gdb_test "help disable display" "Disable some expressions to be displayed when program stops\.\[\r\n\]+Arguments are the code numbers of the expressions to stop displaying\.\[\r\n\]+No argument means disable all automatic-display expressions\.\[\r\n\]+Do \"info display\" to see current list of code numbers\." "help disable display"
 # test help disassemble
@@ -137,17 +137,17 @@
 gdb_test "help dump" "Dump target code/data to a local file\.\[\r\n\]+List of dump subcommands:.*" 
 gdb_test "help dump binary" "Write target code/data to a raw binary file\.\[\r\n\]+List of dump binary subcommands:.*" 
 gdb_test "help dump ihex" "Write target code/data to an intel hex file\.\[\r\n\]+List of dump ihex subcommands:.*" 
-gdb_test "help dump memory" "Write contents of memory to a raw binary file\.\[\r\n\]+Arguments are FILE START STOP\.  Writes the contents of memory within the\[\r\n\]+range \\\[START \.\. STOP\\) to the specifed FILE in raw target ordered bytes\." 
+gdb_test "help dump memory" "Write contents of memory to a raw binary file\.\[\r\n\]+Arguments are FILE START STOP\.  Writes the contents of memory within the\[\r\n\]+range \\\[START \.\. STOP\\) to the specified FILE in raw target ordered bytes\." 
 gdb_test "help dump srec" "Write target code/data to an srec file\.\[\r\n\]+List of dump srec subcommands:.*" 
 gdb_test "help dump tekhex" "Write target code/data to a tekhex file\.\[\r\n\]+List of dump tekhex subcommands:.*" 
 gdb_test "help dump value" "Write the value of an expression to a raw binary file\.\[\r\n\]+Arguments are FILE EXPRESSION\.  Writes the value of EXPRESSION to\[\r\n\]+the specified FILE in raw target ordered bytes\." 
-gdb_test "help dump binary memory" "Write contents of memory to a raw binary file\.\[\r\n\]+Arguments are FILE START STOP\.  Writes the contents of memory\[\r\n\]+within the range \\\[START \.\. STOP\\) to the specifed FILE in binary format\." 
+gdb_test "help dump binary memory" "Write contents of memory to a raw binary file\.\[\r\n\]+Arguments are FILE START STOP\.  Writes the contents of memory\[\r\n\]+within the range \\\[START \.\. STOP\\) to the specified FILE in binary format\." 
 gdb_test "help dump binary value" "Write the value of an expression to a raw binary file\.\[\r\n\]+Arguments are FILE EXPRESSION\.  Writes the value of EXPRESSION\[\r\n\]+to the specified FILE in raw target ordered bytes\." "help dump binary value"
-gdb_test "help dump ihex memory" "Write contents of memory to an ihex file\.\[\r\n\]+Arguments are FILE START STOP\.  Writes the contents of memory within\[\r\n\]+the range \\\[START \.\. STOP\\) to the specifed FILE in intel hex format\." 
+gdb_test "help dump ihex memory" "Write contents of memory to an ihex file\.\[\r\n\]+Arguments are FILE START STOP\.  Writes the contents of memory within\[\r\n\]+the range \\\[START \.\. STOP\\) to the specified FILE in intel hex format\." 
 gdb_test "help dump ihex value" "Write the value of an expression to an ihex file\.\[\r\n\]+Arguments are FILE EXPRESSION\.  Writes the value of EXPRESSION\[\r\n\]+to the specified FILE in intel hex format\." 
-gdb_test "help dump srec memory" "Write contents of memory to an srec file\.\[\r\n\]+Arguments are FILE START STOP\.  Writes the contents of memory\[\r\n\]+within the range \\\[START \.\. STOP\\) to the specifed FILE in srec format\." 
+gdb_test "help dump srec memory" "Write contents of memory to an srec file\.\[\r\n\]+Arguments are FILE START STOP\.  Writes the contents of memory\[\r\n\]+within the range \\\[START \.\. STOP\\) to the specified FILE in srec format\." 
 gdb_test "help dump srec value" "Write the value of an expression to an srec file\.\[\r\n\]+Arguments are FILE EXPRESSION\.  Writes the value of EXPRESSION\[\r\n\]+to the specified FILE in srec format\." 
-gdb_test "help dump tekhex memory" "Write contents of memory to a tekhex file\.\[\r\n\]+Arguments are FILE START STOP\.  Writes the contents of memory\[\r\n\]+within the range \\\[START \.\. STOP\\) to the specifed FILE in tekhex format\." 
+gdb_test "help dump tekhex memory" "Write contents of memory to a tekhex file\.\[\r\n\]+Arguments are FILE START STOP\.  Writes the contents of memory\[\r\n\]+within the range \\\[START \.\. STOP\\) to the specified FILE in tekhex format\." 
 gdb_test "help dump tekhex value" "Write the value of an expression to a tekhex file\.\[\r\n\]+Arguments are FILE EXPRESSION\.  Writes the value of EXPRESSION\[\r\n\]+to the specified FILE in tekhex format\." 
 # this command was removed from GDB 4.5.8
 # test help dump-me
diff -ur upstream.orig/sim/ppc/ChangeLog upstream/sim/ppc/ChangeLog
--- upstream.orig/sim/ppc/ChangeLog	2010-04-14 09:38:05.000000000 +0200
+++ upstream/sim/ppc/ChangeLog	2011-06-03 19:45:22.993805882 +0200
@@ -2949,7 +2949,7 @@
 	* configure.in: Adjust filter flag so that default includes 32bit
 	and floating point.
 	* ppc-instructions: Clean up filter fields so that only in use
-        entries are specifed (ie delete `be').
+        entries are specified (ie delete `be').
 
 	* misc.c (name2i, i2name): New function.  Map between a string and
         an integer value.
diff -ur upstream.orig/sim/ppc/vm.c upstream/sim/ppc/vm.c
--- upstream.orig/sim/ppc/vm.c	1999-04-16 03:35:12.000000000 +0200
+++ upstream/sim/ppc/vm.c	2011-06-03 19:45:22.893807303 +0200
@@ -913,7 +913,7 @@
 #endif
 
 
-/* Rebuild all the data structures for the new context as specifed by
+/* Rebuild all the data structures for the new context as specified by
    the passed registers */
 INLINE_VM\
 (void)


^ permalink raw reply	[flat|nested] 3+ messages in thread
end of thread, other threads:[~2011-06-04  8:59 UTC | newest]

Thread overview: 3+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2011-06-03 18:03 Spelling fixes Stephen Kitt
2011-06-03 23:52 ` Joel Brobecker
2011-06-04  8:59   ` Stephen Kitt

This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox