From: Pierre Muller <muller@cerbere.u-strasbg.fr>
To: gdb-patches@sources.redhat.com
Cc: Christopher Faylor <cgf@redhat.com>
Subject: [RFA] SSE registers for cygxin target.
Date: Sun, 11 Nov 2001 11:03:00 -0000 [thread overview]
Message-ID: <4.2.0.58.20011126104808.00acab48@ics.u-strasbg.fr> (raw)
Message-ID: <20011111110300.s_0_fFmA4RD6JAb6t-3Xa8TXWZHW_CTdSD9qPglq2Qs@z> (raw)
The patch below adds SSE registers for cygwin target.
The only missing code is an addendum to configure.in
in order to check if CONTEXT_EXTENDED_REGISTERS
is known in winnt.h header file.
I asked about this in
http://sources.redhat.com/ml/gdb/2001-11/msg00219.html
but got no answers...
But I never wrote any of these rules, and I even don't know how to regenerate
configure from configure.in file ...
For now, to test the patch, you will need to do
a 'make clean' followed by a 'make "CFLAGS=-dHAVE_CONTEXT_EXTENDED_REGISTERS -gstabs+ -O1"'
for instance.
PS: I disabled flowed mode from my Eudora settings and hope that this will
fix the problems existing in the latest patches I sent. Please ask me to send it again attached if
this patch does not aply cleanly.
PS2: Once this patch is in, I will send the next, i.e.
the support of debug registers... DJ Delorie's idea was
correct, this works like a charm (at least for me
on a Win2000 box).
ChangeLog entry:
2001-11-26 Pierre Muller <muller@ics.u-strasbg.fr>
* config/i386/tm-cygwin.h: Define HAVE_SSE_REGS
if HAVE_CONTEXT_EXTENDED_REGISTERS is defined.
* win32-nat.c: Define CONTEXT_DEBUGGER_DR that will also
include extended registers if HAVE_SSE_REGS is defined.
(mappings array): Add offset of extended registers.
(thread_rec): Use new CONTEXT_DEBUGGER_DR macro.
Index: config/i386/tm-cygwin.h
===================================================================
RCS file: /cvs/src/src/gdb/config/i386/tm-cygwin.h,v
retrieving revision 1.10
diff -u -r1.10 tm-cygwin.h
--- tm-cygwin.h 2001/11/01 16:17:08 1.10
+++ tm-cygwin.h 2001/11/26 09:47:09
@@ -19,8 +19,12 @@
Foundation, Inc., 59 Temple Place - Suite 330,
Boston, MA 02111-1307, USA. */
-
-#undef HAVE_SSE_REGS /* FIXME! win32-nat.c needs to support XMMi registers */
+/* Use SSE registers if winnt.h contains information about them. */
+#ifdef HAVE_CONTEXT_EXTENDED_REGISTERS
+#define HAVE_SSE_REGS
+#else
+#undef HAVE_SSE_REGS
+#endif /* CONTEXT_EXTENDED_REGISTERS */
#define HAVE_I387_REGS
#include "i386/tm-i386.h"
Index: win32-nat.c
===================================================================
RCS file: /cvs/src/src/gdb/win32-nat.c,v
retrieving revision 1.38
diff -u -r1.38 win32-nat.c
--- win32-nat.c 2001/11/24 19:00:03 1.38
+++ win32-nat.c 2001/11/26 09:47:09
@@ -25,6 +25,7 @@
/* We assume we're being built with and will be used for cygwin. */
#include "defs.h"
+#include "tm.h" /* required for SSE registers */
#include "frame.h" /* required by inferior.h */
#include "inferior.h"
#include "target.h"
@@ -66,6 +67,13 @@
#include <sys/procfs.h>
#include <psapi.h>
+#ifdef HAVE_SSE_REGS
+#define CONTEXT_DEBUGGER_DR CONTEXT_DEBUGGER | CONTEXT_EXTENDED_REGISTERS
+#else
+#define CONTEXT_DEBUGGER_DR CONTEXT_DEBUGGER
+#endif
+
+
/* The string sent by cygwin when it processes a signal.
FIXME: This should be in a cygwin include file. */
#define CYGWIN_SIGNAL_STRING "cygwin: signal"
@@ -169,6 +177,19 @@
context_offset (FloatSave.DataSelector),
context_offset (FloatSave.DataOffset),
context_offset (FloatSave.ErrorSelector)
+#ifdef HAVE_SSE_REGS
+ /* XMM0-7 */ ,
+ context_offset (ExtendedRegisters[0*16]),
+ context_offset (ExtendedRegisters[1*16]),
+ context_offset (ExtendedRegisters[2*16]),
+ context_offset (ExtendedRegisters[3*16]),
+ context_offset (ExtendedRegisters[4*16]),
+ context_offset (ExtendedRegisters[5*16]),
+ context_offset (ExtendedRegisters[6*16]),
+ context_offset (ExtendedRegisters[7*16]),
+ /* MXCSR untested */
+ context_offset (ExtendedRegisters[8*16])
+#endif
};
#undef context_offset
@@ -210,7 +231,7 @@
else if (get_context < 0)
th->suspend_count = -1;
- th->context.ContextFlags = CONTEXT_DEBUGGER;
+ th->context.ContextFlags = CONTEXT_DEBUGGER_DR;
GetThreadContext (th->h, &th->context);
}
return th;
Pierre Muller
Institut Charles Sadron
6,rue Boussingault
F 67083 STRASBOURG CEDEX (France)
mailto:muller@ics.u-strasbg.fr
Phone : (33)-3-88-41-40-07 Fax : (33)-3-88-41-40-99
next reply other threads:[~2001-11-26 10:06 UTC|newest]
Thread overview: 22+ messages / expand[flat|nested] mbox.gz Atom feed top
2001-11-26 2:06 Pierre Muller [this message]
2001-11-11 11:03 ` Pierre Muller
2001-11-12 8:54 ` Eli Zaretskii
2001-11-13 7:48 ` Andrew Cagney
2001-11-26 12:43 ` Andrew Cagney
2001-11-26 14:23 ` Christopher Faylor
2001-11-13 8:51 ` Christopher Faylor
2001-11-13 19:54 ` Andrew Cagney
2001-11-13 22:27 ` Christopher Faylor
2001-11-26 21:17 ` Christopher Faylor
2001-11-26 20:47 ` Andrew Cagney
2001-11-26 4:58 ` Pierre Muller
2001-11-12 9:40 ` Pierre Muller
2001-11-26 2:10 ` Pierre Muller
2001-11-11 11:08 ` Pierre Muller
2001-11-11 12:11 ` Corinna Vinschen
2001-11-26 3:44 ` Pierre Muller
2001-11-11 13:37 ` Pierre Muller
2001-11-12 11:29 ` Christopher Faylor
2001-11-12 14:28 ` muller
2001-11-26 10:43 ` muller
2001-11-26 9:40 ` Christopher Faylor
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=4.2.0.58.20011126104808.00acab48@ics.u-strasbg.fr \
--to=muller@cerbere.u-strasbg.fr \
--cc=cgf@redhat.com \
--cc=gdb-patches@sources.redhat.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox