Mirror of the gdb-patches mailing list
 help / color / mirror / Atom feed
* [patch/rfc] Move skip_prologue_using_sal to symtab.c
@ 2004-02-14 19:46 Andrew Cagney
  2004-02-17 14:53 ` Elena Zannoni
  0 siblings, 1 reply; 3+ messages in thread
From: Andrew Cagney @ 2004-02-14 19:46 UTC (permalink / raw)
  To: gdb-patches

[-- Attachment #1: Type: text/plain, Size: 321 bytes --]

Hello,

This patch moves the two identical versions of skip_prologue_using_sal, 
found in both mips-tdep and frv-tdep, into symtab.c (just after 
in_prologue).

I've also added comments to the two refine_prologue_limit variants 
(found in ia64-tdep and rs6000-tdep) pointing at the new code.

comments? symtab ok?
Andrew

[-- Attachment #2: diffs --]
[-- Type: text/plain, Size: 9401 bytes --]

2004-02-14  Andrew Cagney  <cagney@redhat.com>

	* symtab.c (skip_prologue_using_sal): New function.
	* symtab.h (skip_prologue_using_sal): Declare.
	* frv-tdep.c (skip_prologue_using_sal): Delete function.
	* mips-tdep.c (skip_prologue_using_sal): Delete function.
	* rs6000-tdep.c (refine_prologue_limit): Mention
	skip_prologue_using_sal.
	* ia64-tdep.c (refine_prologue_limit): Ditto.

Index: frv-tdep.c
===================================================================
RCS file: /cvs/src/src/gdb/frv-tdep.c,v
retrieving revision 1.70
diff -u -r1.70 frv-tdep.c
--- frv-tdep.c	14 Feb 2004 15:46:33 -0000	1.70
+++ frv-tdep.c	14 Feb 2004 19:28:42 -0000
@@ -414,62 +414,6 @@
   return (8 <= reg && reg <= 13);
 }
 
-/* Given PC at the function's start address, attempt to find the
-   prologue end using SAL information.  Return zero if the skip fails.
-
-   A non-optimized prologue traditionally has one SAL for the function
-   and a second for the function body.  A single line function has
-   them both pointing at the same line.
-
-   An optimized prologue is similar but the prologue may contain
-   instructions (SALs) from the instruction body.  Need to skip those
-   while not getting into the function body.
-
-   The functions end point and an increasing SAL line are used as
-   indicators of the prologue's endpoint.
-
-   This code is based on the function refine_prologue_limit (versions
-   found in both ia64 and ppc).  */
-
-static CORE_ADDR
-skip_prologue_using_sal (CORE_ADDR func_addr)
-{
-  struct symtab_and_line prologue_sal;
-  CORE_ADDR start_pc;
-  CORE_ADDR end_pc;
-
-  /* Get an initial range for the function.  */
-  find_pc_partial_function (func_addr, NULL, &start_pc, &end_pc);
-  start_pc += FUNCTION_START_OFFSET;
-
-  prologue_sal = find_pc_line (start_pc, 0);
-  if (prologue_sal.line != 0)
-    {
-      while (prologue_sal.end < end_pc)
-	{
-	  struct symtab_and_line sal;
-
-	  sal = find_pc_line (prologue_sal.end, 0);
-	  if (sal.line == 0)
-	    break;
-	  /* Assume that a consecutive SAL for the same (or larger)
-             line mark the prologue -> body transition.  */
-	  if (sal.line >= prologue_sal.line)
-	    break;
-	  /* The case in which compiler's optimizer/scheduler has
-	     moved instructions into the prologue.  We look ahead in
-	     the function looking for address ranges whose
-	     corresponding line number is less the first one that we
-	     found for the function.  This is more conservative then
-	     refine_prologue_limit which scans a large number of SALs
-	     looking for any in the prologue */
-	  prologue_sal = sal;
-	}
-    }
-  return prologue_sal.end;
-}
-
-
 /* Scan an FR-V prologue, starting at PC, until frame->PC.
    If FRAME is non-zero, fill in its saved_regs with appropriate addresses.
    We assume FRAME's saved_regs array has already been allocated and cleared.
Index: ia64-tdep.c
===================================================================
RCS file: /cvs/src/src/gdb/ia64-tdep.c,v
retrieving revision 1.114
diff -u -r1.114 ia64-tdep.c
--- ia64-tdep.c	14 Feb 2004 15:46:33 -0000	1.114
+++ ia64-tdep.c	14 Feb 2004 19:28:47 -0000
@@ -930,6 +930,9 @@
    used with no further scanning in the event that the function is
    frameless.  */
 
+/* FIXME: cagney/2004-02-14: This function and logic have largely been
+   superseeded by skip_prologue_using_sal.  */
+
 static CORE_ADDR
 refine_prologue_limit (CORE_ADDR pc, CORE_ADDR lim_pc, int *trust_limit)
 {
Index: mips-tdep.c
===================================================================
RCS file: /cvs/src/src/gdb/mips-tdep.c,v
retrieving revision 1.282
diff -u -r1.282 mips-tdep.c
--- mips-tdep.c	11 Feb 2004 18:47:26 -0000	1.282
+++ mips-tdep.c	14 Feb 2004 19:28:52 -0000
@@ -4564,62 +4564,6 @@
 		     extract_unsigned_integer (buf, MIPS_INSTLEN));
 }
 
-
-/* Given PC at the function's start address, attempt to find the
-   prologue end using SAL information.  Return zero if the skip fails.
-
-   A non-optimized prologue traditionally has one SAL for the function
-   and a second for the function body.  A single line function has
-   them both pointing at the same line.
-
-   An optimized prologue is similar but the prologue may contain
-   instructions (SALs) from the instruction body.  Need to skip those
-   while not getting into the function body.
-
-   The functions end point and an increasing SAL line are used as
-   indicators of the prologue's endpoint.
-
-   This code is based on the function refine_prologue_limit (versions
-   found in both ia64 and ppc).  */
-
-static CORE_ADDR
-skip_prologue_using_sal (CORE_ADDR func_addr)
-{
-  struct symtab_and_line prologue_sal;
-  CORE_ADDR start_pc;
-  CORE_ADDR end_pc;
-
-  /* Get an initial range for the function.  */
-  find_pc_partial_function (func_addr, NULL, &start_pc, &end_pc);
-  start_pc += FUNCTION_START_OFFSET;
-
-  prologue_sal = find_pc_line (start_pc, 0);
-  if (prologue_sal.line != 0)
-    {
-      while (prologue_sal.end < end_pc)
-	{
-	  struct symtab_and_line sal;
-
-	  sal = find_pc_line (prologue_sal.end, 0);
-	  if (sal.line == 0)
-	    break;
-	  /* Assume that a consecutive SAL for the same (or larger)
-	     line mark the prologue -> body transition.  */
-	  if (sal.line >= prologue_sal.line)
-	    break;
-	  /* The case in which compiler's optimizer/scheduler has
-	     moved instructions into the prologue.  We look ahead in
-	     the function looking for address ranges whose
-	     corresponding line number is less the first one that we
-	     found for the function.  This is more conservative then
-	     refine_prologue_limit which scans a large number of SALs
-	     looking for any in the prologue */
-	  prologue_sal = sal;
-	}
-    }
-  return prologue_sal.end;
-}
-
 /* Skip the PC past function prologue instructions (32-bit version).
    This is a helper function for mips_skip_prologue.  */
 
Index: rs6000-tdep.c
===================================================================
RCS file: /cvs/src/src/gdb/rs6000-tdep.c,v
retrieving revision 1.179
diff -u -r1.179 rs6000-tdep.c
--- rs6000-tdep.c	14 Feb 2004 15:46:33 -0000	1.179
+++ rs6000-tdep.c	14 Feb 2004 19:29:07 -0000
@@ -425,6 +425,10 @@
    the line data in the symbol table.  If successful, a better guess
    on where the prologue ends is returned, otherwise the previous
    value of lim_pc is returned.  */
+
+/* FIXME: cagney/2004-02-14: This function and logic have largely been
+   superseeded by skip_prologue_using_sal.  */
+
 static CORE_ADDR
 refine_prologue_limit (CORE_ADDR pc, CORE_ADDR lim_pc)
 {
Index: symtab.c
===================================================================
RCS file: /cvs/src/src/gdb/symtab.c,v
retrieving revision 1.126
diff -u -r1.126 symtab.c
--- symtab.c	7 Feb 2004 23:13:47 -0000	1.126
+++ symtab.c	14 Feb 2004 19:29:11 -0000
@@ -3860,6 +3860,60 @@
   return func_addr <= pc && pc < sal.end;
 }
 
+/* Given PC at the function's start address, attempt to find the
+   prologue end using SAL information.  Return zero if the skip fails.
+
+   A non-optimized prologue traditionally has one SAL for the function
+   and a second for the function body.  A single line function has
+   them both pointing at the same line.
+
+   An optimized prologue is similar but the prologue may contain
+   instructions (SALs) from the instruction body.  Need to skip those
+   while not getting into the function body.
+
+   The functions end point and an increasing SAL line are used as
+   indicators of the prologue's endpoint.
+
+   This code is based on the function refine_prologue_limit (versions
+   found in both ia64 and ppc).  */
+
+CORE_ADDR
+skip_prologue_using_sal (CORE_ADDR func_addr)
+{
+  struct symtab_and_line prologue_sal;
+  CORE_ADDR start_pc;
+  CORE_ADDR end_pc;
+
+  /* Get an initial range for the function.  */
+  find_pc_partial_function (func_addr, NULL, &start_pc, &end_pc);
+  start_pc += FUNCTION_START_OFFSET;
+
+  prologue_sal = find_pc_line (start_pc, 0);
+  if (prologue_sal.line != 0)
+    {
+      while (prologue_sal.end < end_pc)
+	{
+	  struct symtab_and_line sal;
+
+	  sal = find_pc_line (prologue_sal.end, 0);
+	  if (sal.line == 0)
+	    break;
+	  /* Assume that a consecutive SAL for the same (or larger)
+	     line mark the prologue -> body transition.  */
+	  if (sal.line >= prologue_sal.line)
+	    break;
+	  /* The case in which compiler's optimizer/scheduler has
+	     moved instructions into the prologue.  We look ahead in
+	     the function looking for address ranges whose
+	     corresponding line number is less the first one that we
+	     found for the function.  This is more conservative then
+	     refine_prologue_limit which scans a large number of SALs
+	     looking for any in the prologue */
+	  prologue_sal = sal;
+	}
+    }
+  return prologue_sal.end;
+}
 \f
 struct symtabs_and_lines
 decode_line_spec (char *string, int funfirstline)
Index: symtab.h
===================================================================
RCS file: /cvs/src/src/gdb/symtab.h,v
retrieving revision 1.87
diff -u -r1.87 symtab.h
--- symtab.h	7 Feb 2004 23:13:47 -0000	1.87
+++ symtab.h	14 Feb 2004 19:29:33 -0000
@@ -1318,6 +1318,8 @@
 
 extern int in_prologue (CORE_ADDR pc, CORE_ADDR func_start);
 
+extern CORE_ADDR skip_prologue_using_sal (CORE_ADDR func_addr);
+
 extern struct symbol *fixup_symbol_section (struct symbol *,
 					    struct objfile *);
 

^ permalink raw reply	[flat|nested] 3+ messages in thread
end of thread, other threads:[~2004-02-17 15:19 UTC | newest]

Thread overview: 3+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2004-02-14 19:46 [patch/rfc] Move skip_prologue_using_sal to symtab.c Andrew Cagney
2004-02-17 14:53 ` Elena Zannoni
2004-02-17 15:19   ` Andrew Cagney

This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox