Mirror of the gdb-patches mailing list
 help / color / mirror / Atom feed
From: Elena Zannoni <ezannoni@redhat.com>
To: Andrew Volkov <Andrew.Volkov@transas.com>
Cc: Elena Zannoni <ezannoni@redhat.com>, gdb-patches@sources.redhat.com
Subject: RE: [RFA] sim-h8300.h new file
Date: Mon, 29 Jul 2002 09:02:00 -0000	[thread overview]
Message-ID: <15685.26036.727312.248740@localhost.redhat.com> (raw)
In-Reply-To: <2E74F312D6980D459F3A05492BA40F8D0118DD07@clue.transas.com>

Andrew Volkov writes:
 > Now it ok ?
 > 
 > Andrey


Ok, but you don't need the first '= 0' bit.

Elena


 > 
 > >
 > >Andrew Volkov writes:
 > > > Committed
 > > > 
 > > > Andrey
 > >
 > >Ahem, this hadn't been approved.  Could you please change the file so
 > >that it follows the convention used for other sims?  Look at
 > >sim-arm.h, for instance. You should call the enum values
 > >SIM_H8300_R0_REGNUM, etc. Don't need to distinguish the reg names
 > >based on the mode. (you can add comments though)
 > >
 > >thanks
 > >Elena
 > >
 > 
 > Index: sim-h8300.h
 > ===================================================================
 > RCS file: /cvs/src/src/include/gdb/sim-h8300.h,v
 > retrieving revision 1.1
 > diff -u -r1.1 sim-h8300.h
 > --- sim-h8300.h	23 Jul 2002 10:30:14 -0000	1.1
 > +++ sim-h8300.h	29 Jul 2002 10:46:34 -0000
 > @@ -26,46 +26,49 @@
 >    
 >  /* The simulator makes use of the following register information. */ 
 >    
 > -/* Registers common to all the H8 variants. */
 >    enum sim_h8300_regs
 >    {
 > -    H8300_R0_REGNUM = 0,
 > -    H8300_R1_REGNUM,
 > -    H8300_R2_REGNUM,
 > -    H8300_R3_REGNUM,
 > -    H8300_R4_REGNUM,
 > -    H8300_R5_REGNUM,
 > -    H8300_R6_REGNUM,
 > -    H8300_R7_REGNUM,
 > +    /* Registers common to all the H8 variants. */
 > +    /* Start here: */
 > +    SIM_H8300_R0_REGNUM = 0,    
 > +    SIM_H8300_R1_REGNUM,
 > +    SIM_H8300_R2_REGNUM,
 > +    SIM_H8300_R3_REGNUM,
 > +    SIM_H8300_R4_REGNUM,
 > +    SIM_H8300_R5_REGNUM,
 > +    SIM_H8300_R6_REGNUM,
 > +    SIM_H8300_R7_REGNUM,
 >  
 > -    H8300_PC_REGNUM,	/* Contains program counter */
 > -    H8300_CCR_REGNUM,	/* Contains processor status */
 > +    SIM_H8300_CCR_REGNUM,  /* Contains processor status */
 > +    SIM_H8300_PC_REGNUM,   /* Contains program counter */
 > +    /* End here */
 > +    
 > +    SIM_H8300_EXR_REGNUM,  /* Contains extended processor status 
 > +                              H8S and higher */
 > +    SIM_H8300_MACL_REGNUM, /* Lower part of MAC register (26xx only)*/
 > +    SIM_H8300_MACH_REGNUM, /* High part of MAC register (26xx only) */
 >  
 > -    H8300_S_EXR_REGNUM,	/* Contains extended processor status */
 > -    H8300_S_MACL_REGNUM,/* Lower part of MAC register */
 > -    H8300_S_MACH_REGNUM,/* High part of MAC register */
 > -
 > -    H8300_SIM_CYCLE_REGNUM,
 > -    H8300_SIM_INST_REGNUM,
 > -    H8300_SIM_TICK_REGNUM
 > +    SIM_H8300_CYCLE_REGNUM,
 > +    SIM_H8300_INST_REGNUM,
 > +    SIM_H8300_TICK_REGNUM
 >    };
 >  
 >    enum
 >    {
 > -    ARG_FIRST_REGNUM = H8300_R0_REGNUM,	/* first reg in which an arg
 > 
 > -					   may be passed */
 > -    ARG_LAST_REGNUM = H8300_R3_REGNUM,	/* last  reg in which an arg 
 > -					   may be passed */
 > -    H8300_FP_REGNUM = H8300_R6_REGNUM,	/* Contain address of executing 
 > -					   stack frame */
 > -    H8300_SP_REGNUM = H8300_R7_REGNUM	/* Contains address of top of stack
 > */
 > +    SIM_H8300_ARG_FIRST_REGNUM = SIM_H8300_R0_REGNUM, /* first reg in which
 > an arg 
 > +                                                         may be passed */
 > 
 > +    SIM_H8300_ARG_LAST_REGNUM = SIM_H8300_R3_REGNUM,  /* last  reg in which
 > an arg 
 > +                                                         may be passed */
 > +    SIM_H8300_FP_REGNUM = SIM_H8300_R6_REGNUM, /* Contain address of
 > executing 
 > +                                                  stack frame */
 > +    SIM_H8300_SP_REGNUM = SIM_H8300_R7_REGNUM  /* Contains address of top
 > of stack */
 >    };
 >  
 >    enum
 >    {
 > -    H8300_NUM_COMMON_REGS = 10,
 > -    H8300_S_NUM_REGS = 13,
 > -    H8300_NUM_SIM_REGS = 16
 > +    SIM_H8300_NUM_COMMON_REGS = 10,
 > +    SIM_H8300_S_NUM_REGS = 13,
 > +    SIM_H8300_NUM_REGS = 16
 >    };
 >  
 >  #ifdef __cplusplus
 > 


  reply	other threads:[~2002-07-29 15:58 UTC|newest]

Thread overview: 8+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2002-07-29  4:03 Andrew Volkov
2002-07-29  9:02 ` Elena Zannoni [this message]
  -- strict thread matches above, loose matches on Subject: below --
2002-07-29 10:04 Andrew Volkov
2002-07-23  4:13 Andrew Volkov
2002-07-24  6:14 ` Elena Zannoni
2002-07-22 11:12 Andrew Volkov
2002-07-22  7:28 Andrew Volkov
2002-07-22  8:09 ` Elena Zannoni

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=15685.26036.727312.248740@localhost.redhat.com \
    --to=ezannoni@redhat.com \
    --cc=Andrew.Volkov@transas.com \
    --cc=gdb-patches@sources.redhat.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox