* [RFA] remote-e7000.c warnings
@ 2001-07-11 18:32 Elena Zannoni
2001-07-11 19:42 ` Andrew Cagney
0 siblings, 1 reply; 3+ messages in thread
From: Elena Zannoni @ 2001-07-11 18:32 UTC (permalink / raw)
To: gdb-patches
This patch removes warnings when building remote-e7000.c. (On Linux
7.0) Since this file gets build with target=sh-elf, I was getting
tired of all the warnings on the screen.
But then I saw the FIXME in the Makefile, so I am not sure what to do.
# FIXME: For the SH target, remote-e7000 contains numerous -Wformat
# warnings. Since the fixes involve modifications to the code that
# handles the SH remote protocol the changes need to be tested against
# an SH board before they can be committed. cagney 1999-09-01.
Ideas?
Can anybody test this with a real connection?
Here is the patch anyway.
Elena
2001-07-11 Elena Zannoni <ezannoni@redhat.com>
* remote-e7000.c (fetch_regs_from_dump): If register set is null,
generate an internal error.
(e7000_fetch_registers): Initialize variable 'wanted'.
(e7000_wait): Initialize variable 'wanted_nopc'.
(e7000_store_register): Fix sprintf compiler warnings.
(sub2_from_pc): Ditto.
(e7000_open): Close the descriptor, not the name.
(e7000_load): Fix compiler warnings.
(sub2_from_pc): Ditto.
Index: remote-e7000.c
===================================================================
RCS file: /cvs/src/src/gdb/remote-e7000.c,v
retrieving revision 1.22
diff -u -p -r1.22 remote-e7000.c
--- remote-e7000.c 2001/06/10 16:25:51 1.22
+++ remote-e7000.c 2001/07/12 01:28:22
@@ -652,7 +652,7 @@ e7000_open (char *args, int from_tty)
if (SERIAL_SETBAUDRATE (e7000_desc, baudrate))
{
- SERIAL_CLOSE (dev_name);
+ SERIAL_CLOSE (e7000_desc);
perror_with_name (dev_name);
}
SERIAL_RAW (e7000_desc);
@@ -789,6 +789,9 @@ fetch_regs_from_dump (int (*nextchar) ()
int thischar = nextchar ();
+ if (want == NULL)
+ internal_error (__FILE__, __LINE__, "Register set not selected.");
+
while (*want)
{
switch (*want)
@@ -891,7 +894,7 @@ static void
e7000_fetch_registers (void)
{
int regno;
- char *wanted;
+ char *wanted = NULL;
puts_e7000debug ("R\r");
@@ -966,18 +969,18 @@ e7000_store_register (int regno)
{
if (regno <= 7)
{
- sprintf (buf, ".ER%d %lx\r", regno, read_register (regno));
+ sprintf (buf, ".ER%d %lx\r", regno, (long) read_register (regno));
puts_e7000debug (buf);
}
else if (regno == PC_REGNUM)
{
- sprintf (buf, ".PC %lx\r", read_register (regno));
+ sprintf (buf, ".PC %lx\r", (long) read_register (regno));
puts_e7000debug (buf);
}
#ifdef CCR_REGNUM
else if (regno == CCR_REGNUM)
{
- sprintf (buf, ".CCR %lx\r", read_register (regno));
+ sprintf (buf, ".CCR %lx\r", (long) read_register (regno));
puts_e7000debug (buf);
}
#endif
@@ -987,48 +990,48 @@ e7000_store_register (int regno)
{
if (regno == PC_REGNUM)
{
- sprintf (buf, ".PC %lx\r", read_register (regno));
+ sprintf (buf, ".PC %lx\r", (long) read_register (regno));
puts_e7000debug (buf);
}
else if (regno == SR_REGNUM)
{
- sprintf (buf, ".SR %lx\r", read_register (regno));
+ sprintf (buf, ".SR %lx\r", (long) read_register (regno));
puts_e7000debug (buf);
}
else if (regno == PR_REGNUM)
{
- sprintf (buf, ".PR %lx\r", read_register (regno));
+ sprintf (buf, ".PR %lx\r", (long) read_register (regno));
puts_e7000debug (buf);
}
else if (regno == GBR_REGNUM)
{
- sprintf (buf, ".GBR %lx\r", read_register (regno));
+ sprintf (buf, ".GBR %lx\r", (long) read_register (regno));
puts_e7000debug (buf);
}
else if (regno == VBR_REGNUM)
{
- sprintf (buf, ".VBR %lx\r", read_register (regno));
+ sprintf (buf, ".VBR %lx\r", (long) read_register (regno));
puts_e7000debug (buf);
}
else if (regno == MACH_REGNUM)
{
- sprintf (buf, ".MACH %lx\r", read_register (regno));
+ sprintf (buf, ".MACH %lx\r", (long) read_register (regno));
puts_e7000debug (buf);
}
else if (regno == MACL_REGNUM)
{
- sprintf (buf, ".MACL %lx\r", read_register (regno));
+ sprintf (buf, ".MACL %lx\r", (long) read_register (regno));
puts_e7000debug (buf);
}
else
{
- sprintf (buf, ".R%d %lx\r", regno, read_register (regno));
+ sprintf (buf, ".R%d %lx\r", regno, (long) read_register (regno));
puts_e7000debug (buf);
}
}
@@ -1570,10 +1573,10 @@ e7000_load (char *args, int from_tty)
section_size = bfd_get_section_size_before_reloc (section);
if (!quiet)
- printf_filtered ("[Loading section %s at 0x%x (%ud bytes)]\n",
+ printf_filtered ("[Loading section %s at 0x%s (%s bytes)]\n",
bfd_get_section_name (pbfd, section),
- section_address,
- section_size);
+ paddr_nz (section_address),
+ paddr_u (section_size));
fptr = 0;
@@ -1647,7 +1650,7 @@ e7000_load (char *args, int from_tty)
entry = bfd_get_start_address (pbfd);
if (!quiet)
- printf_unfiltered ("[Starting %s at 0x%x]\n", filename, entry);
+ printf_unfiltered ("[Starting %s at 0x%s]\n", filename, paddr_nz (entry));
/* start_routine (entry); */
}
@@ -1965,7 +1968,7 @@ sub2_from_pc (void)
REGISTER_RAW_SIZE (PC_REGNUM),
read_register (PC_REGNUM) - 2);
supply_register (PC_REGNUM, buf);
- sprintf (buf2, ".PC %lx\r", read_register (PC_REGNUM));
+ sprintf (buf2, ".PC %lx\r", (long) read_register (PC_REGNUM));
puts_e7000debug (buf2);
}
@@ -1994,7 +1997,7 @@ e7000_wait (ptid_t ptid, struct target_w
int running_count = 0;
int had_sleep = 0;
int loop = 1;
- char *wanted_nopc;
+ char *wanted_nopc = NULL;
/* Then echo chars until PC= string seen */
gch (); /* Drop cr */
^ permalink raw reply [flat|nested] 3+ messages in thread* Re: [RFA] remote-e7000.c warnings 2001-07-11 18:32 [RFA] remote-e7000.c warnings Elena Zannoni @ 2001-07-11 19:42 ` Andrew Cagney 2001-07-13 13:04 ` Elena Zannoni 0 siblings, 1 reply; 3+ messages in thread From: Andrew Cagney @ 2001-07-11 19:42 UTC (permalink / raw) To: Elena Zannoni; +Cc: gdb-patches > This patch removes warnings when building remote-e7000.c. (On Linux > 7.0) Since this file gets build with target=sh-elf, I was getting > tired of all the warnings on the screen. > But then I saw the FIXME in the Makefile, so I am not sure what to do. > # FIXME: For the SH target, remote-e7000 contains numerous -Wformat > # warnings. Since the fixes involve modifications to the code that > # handles the SH remote protocol the changes need to be tested against > # an SH board before they can be committed. cagney 1999-09-01. This is me be paranoid :-) If you can find someone to test it then good, if not, we might as well just bite the bullet and let it go in anway :-/ It certainly falls under: ``All maintainers can make mechanical (params, spelling, indentation, multi-arch, -W..., ....) changes to ``maintenance only'' targets. Please sanity check the change by compiling with one of the listed targets.'' > - sprintf (buf, ".ER%d %lx\r", regno, read_register (regno)); > + sprintf (buf, ".ER%d %lx\r", regno, (long) read_register (regno)); To think out loud, is: sprintf (buf, ".ER%d %s\r", regno, phex_nz (read_register (regno), 0); more portable? I suspect I had that in mind and hence the comment. enjoy, Andrew ^ permalink raw reply [flat|nested] 3+ messages in thread
* Re: [RFA] remote-e7000.c warnings 2001-07-11 19:42 ` Andrew Cagney @ 2001-07-13 13:04 ` Elena Zannoni 0 siblings, 0 replies; 3+ messages in thread From: Elena Zannoni @ 2001-07-13 13:04 UTC (permalink / raw) To: Andrew Cagney; +Cc: Elena Zannoni, gdb-patches Andrew Cagney writes: > > This patch removes warnings when building remote-e7000.c. (On Linux > > 7.0) Since this file gets build with target=sh-elf, I was getting > > tired of all the warnings on the screen. > > But then I saw the FIXME in the Makefile, so I am not sure what to do. > > > > > # FIXME: For the SH target, remote-e7000 contains numerous -Wformat > > # warnings. Since the fixes involve modifications to the code that > > # handles the SH remote protocol the changes need to be tested against > > # an SH board before they can be committed. cagney 1999-09-01. > > > This is me be paranoid :-) If you can find someone to test it then > good, if not, we might as well just bite the bullet and let it go in > anway :-/ It certainly falls under: > > ``All maintainers can make mechanical (params, spelling, indentation, > multi-arch, -W..., ....) changes to ``maintenance only'' targets. > Please sanity check the change by compiling with one of the listed > targets.'' > > > > - sprintf (buf, ".ER%d %lx\r", regno, read_register (regno)); > > + sprintf (buf, ".ER%d %lx\r", regno, (long) read_register (regno)); > > > To think out loud, is: > > sprintf (buf, ".ER%d %s\r", regno, phex_nz (read_register (regno), 0); > > more portable? I suspect I had that in mind and hence the comment. > > enjoy, > Andrew Ok, then. I checked in the following: 2001-07-13 Elena Zannoni <ezannoni@redhat.com> * remote-e7000.c (fetch_regs_from_dump): If register set is null, generate an internal error. (e7000_fetch_registers): Initialize variable 'wanted'. (e7000_wait): Initialize variable 'wanted_nopc'. (e7000_store_register): Fix sprintf compiler warnings. (sub2_from_pc): Ditto. (e7000_open): Close the descriptor, not the name. (e7000_load): Fix compiler warnings. (sub2_from_pc): Ditto. * Makefile.in (remote-e7000.o): Can now compile with -Werror. Index: Makefile.in =================================================================== RCS file: /cvs/src/src/gdb/Makefile.in,v retrieving revision 1.95 diff -u -p -r1.95 Makefile.in --- Makefile.in 2001/07/10 23:08:12 1.95 +++ Makefile.in 2001/07/13 20:00:39 @@ -1837,13 +1837,8 @@ remote-bug.o: remote-bug.c $(defs_h) $(g $(inferior_h) target.h terminal.h $(remote_utils_h) $(gdb_string_h) \ $(regcache_h) -# FIXME: For the SH target, remote-e7000 contains numerous -Wformat -# warnings. Since the fixes involve modifications to the code that -# handles the SH remote protocol the changes need to be tested against -# an SH board before they can be committed. cagney 1999-09-01. remote-e7000.o: remote-e7000.c $(defs_h) $(gdbcore_h) target.h \ serial.h $(gdb_string_h) $(regcache_h) - $(CC) -c $(INTERNAL_WARN_CFLAGS) $(NO_WERROR_CFLAGS) $< remote-eb.o: remote-eb.c $(srcdir)/config/a29k/tm-a29k.h \ $(defs_h) $(gdbcore_h) $(inferior_h) symfile.h target.h terminal.h \ Index: remote-e7000.c =================================================================== RCS file: /cvs/src/src/gdb/remote-e7000.c,v retrieving revision 1.23 diff -u -p -r1.23 remote-e7000.c --- remote-e7000.c 2001/07/11 17:52:32 1.23 +++ remote-e7000.c 2001/07/13 20:00:40 @@ -652,7 +652,7 @@ e7000_open (char *args, int from_tty) if (SERIAL_SETBAUDRATE (e7000_desc, baudrate)) { - SERIAL_CLOSE (dev_name); + SERIAL_CLOSE (e7000_desc); perror_with_name (dev_name); } SERIAL_RAW (e7000_desc); @@ -789,6 +789,9 @@ fetch_regs_from_dump (int (*nextchar) () int thischar = nextchar (); + if (want == NULL) + internal_error (__FILE__, __LINE__, "Register set not selected."); + while (*want) { switch (*want) @@ -891,7 +894,7 @@ static void e7000_fetch_registers (void) { int regno; - char *wanted; + char *wanted = NULL; puts_e7000debug ("R\r"); @@ -966,18 +969,18 @@ e7000_store_register (int regno) { if (regno <= 7) { - sprintf (buf, ".ER%d %lx\r", regno, read_register (regno)); + sprintf (buf, ".ER%d %s\r", regno, phex_nz (read_register (regno), 0)); puts_e7000debug (buf); } else if (regno == PC_REGNUM) { - sprintf (buf, ".PC %lx\r", read_register (regno)); + sprintf (buf, ".PC %s\r", phex_nz (read_register (regno), 0)); puts_e7000debug (buf); } #ifdef CCR_REGNUM else if (regno == CCR_REGNUM) { - sprintf (buf, ".CCR %lx\r", read_register (regno)); + sprintf (buf, ".CCR %s\r", phex_nz (read_register (regno), 0)); puts_e7000debug (buf); } #endif @@ -987,48 +990,48 @@ e7000_store_register (int regno) { if (regno == PC_REGNUM) { - sprintf (buf, ".PC %lx\r", read_register (regno)); + sprintf (buf, ".PC %s\r", phex_nz (read_register (regno), 0)); puts_e7000debug (buf); } else if (regno == SR_REGNUM) { - sprintf (buf, ".SR %lx\r", read_register (regno)); + sprintf (buf, ".SR %s\r", phex_nz (read_register (regno), 0)); puts_e7000debug (buf); } else if (regno == PR_REGNUM) { - sprintf (buf, ".PR %lx\r", read_register (regno)); + sprintf (buf, ".PR %s\r", phex_nz (read_register (regno), 0)); puts_e7000debug (buf); } else if (regno == GBR_REGNUM) { - sprintf (buf, ".GBR %lx\r", read_register (regno)); + sprintf (buf, ".GBR %s\r", phex_nz (read_register (regno), 0)); puts_e7000debug (buf); } else if (regno == VBR_REGNUM) { - sprintf (buf, ".VBR %lx\r", read_register (regno)); + sprintf (buf, ".VBR %s\r", phex_nz (read_register (regno), 0)); puts_e7000debug (buf); } else if (regno == MACH_REGNUM) { - sprintf (buf, ".MACH %lx\r", read_register (regno)); + sprintf (buf, ".MACH %s\r", phex_nz (read_register (regno), 0)); puts_e7000debug (buf); } else if (regno == MACL_REGNUM) { - sprintf (buf, ".MACL %lx\r", read_register (regno)); + sprintf (buf, ".MACL %s\r", phex_nz (read_register (regno), 0)); puts_e7000debug (buf); } else { - sprintf (buf, ".R%d %lx\r", regno, read_register (regno)); + sprintf (buf, ".R%d %s\r", regno, phex_nz (read_register (regno), 0)); puts_e7000debug (buf); } } @@ -1570,10 +1573,10 @@ e7000_load (char *args, int from_tty) section_size = bfd_get_section_size_before_reloc (section); if (!quiet) - printf_filtered ("[Loading section %s at 0x%x (%ud bytes)]\n", + printf_filtered ("[Loading section %s at 0x%s (%s bytes)]\n", bfd_get_section_name (pbfd, section), - section_address, - section_size); + paddr_nz (section_address), + paddr_u (section_size)); fptr = 0; @@ -1647,7 +1650,7 @@ e7000_load (char *args, int from_tty) entry = bfd_get_start_address (pbfd); if (!quiet) - printf_unfiltered ("[Starting %s at 0x%x]\n", filename, entry); + printf_unfiltered ("[Starting %s at 0x%s]\n", filename, paddr_nz (entry)); /* start_routine (entry); */ } @@ -1965,7 +1968,7 @@ sub2_from_pc (void) REGISTER_RAW_SIZE (PC_REGNUM), read_register (PC_REGNUM) - 2); supply_register (PC_REGNUM, buf); - sprintf (buf2, ".PC %lx\r", read_register (PC_REGNUM)); + sprintf (buf2, ".PC %s\r", phex_nz (read_register (PC_REGNUM), 0)); puts_e7000debug (buf2); } @@ -1994,7 +1997,7 @@ e7000_wait (ptid_t ptid, struct target_w int running_count = 0; int had_sleep = 0; int loop = 1; - char *wanted_nopc; + char *wanted_nopc = NULL; /* Then echo chars until PC= string seen */ gch (); /* Drop cr */ ^ permalink raw reply [flat|nested] 3+ messages in thread
end of thread, other threads:[~2001-07-13 13:04 UTC | newest] Thread overview: 3+ messages (download: mbox.gz / follow: Atom feed) -- links below jump to the message on this page -- 2001-07-11 18:32 [RFA] remote-e7000.c warnings Elena Zannoni 2001-07-11 19:42 ` Andrew Cagney 2001-07-13 13:04 ` Elena Zannoni
This is a public inbox, see mirroring instructions for how to clone and mirror all data and code used for this inbox