From: Jiri Gaisler <jiri@gaisler.se>
To: gdb-patches@sourceware.org
Cc: Jiri Gaisler <jiri@gaisler.se>
Subject: [PATCH v4 03/13] sim/erc32: Switched emulated memory to host endian order.
Date: Tue, 17 Mar 2015 21:03:00 -0000 [thread overview]
Message-ID: <1426626170-21401-4-git-send-email-jiri@gaisler.se> (raw)
In-Reply-To: <1426626170-21401-1-git-send-email-jiri@gaisler.se>
Change data ordering in emulated memory from target order (big endian)
to host order. Improves performance and simplifies most memory
operations. Requires some byte twisting during stores on little
endian hosts (intel).
* erc32.c (fetch_bytes): Remove. (store_bytes) Remove byte twisting.
(memory_read) Access memory directly. (extract_short,
extract_short_signed, extract_byte, extract_byte_signed) New
function for for sub-word LD instructions.
* func.c (disp_ctrl, dis_mem): Ajust print-out to new data endian.
* interf.c (sim_open): Convert endian when gdb writes to memory.
* sim-main.c : New file. Pull in sim-endian.c to use common endian conversions.
---
sim/erc32/Makefile.in | 8 +--
sim/erc32/erc32.c | 168 ++++++++++++--------------------------------------
sim/erc32/exec.c | 60 +++++++++++++++---
sim/erc32/func.c | 55 +++++++++++------
sim/erc32/interf.c | 30 +++++++++
sim/erc32/sim-main.c | 26 ++++++++
sim/erc32/sis.c | 4 ++
7 files changed, 189 insertions(+), 162 deletions(-)
create mode 100644 sim/erc32/sim-main.c
diff --git a/sim/erc32/Makefile.in b/sim/erc32/Makefile.in
index 108e8b6..e8a8f18 100644
--- a/sim/erc32/Makefile.in
+++ b/sim/erc32/Makefile.in
@@ -21,7 +21,10 @@
TERMCAP_LIB = @TERMCAP@
READLINE_LIB = @READLINE@
-SIM_OBJS = exec.o erc32.o func.o help.o float.o interf.o
+# `sis' doesn't need interf.o.
+SIS_OFILES = exec.o erc32.o func.o help.o float.o sim-main.o
+
+SIM_OBJS = $(SIS_OFILES) interf.o
SIM_RUN_OBJS = sis.o
SIM_EXTRA_LIBS = $(READLINE_LIB) $(TERMCAP_LIB) -lm
SIM_EXTRA_ALL = sis
@@ -35,9 +38,6 @@ SIM_EXTRA_CFLAGS = -DFAST_UART -I$(srcroot)
## COMMON_POST_CONFIG_FRAG
-# `sis' doesn't need interf.o.
-SIS_OFILES = exec.o erc32.o func.o help.o float.o
-
sis: sis.o $(SIS_OFILES) $(COMMON_OBJS) $(LIBDEPS)
$(CC) $(ALL_CFLAGS) -o sis \
sis.o $(SIS_OFILES) $(COMMON_OBJS) $(EXTRA_LIBS)
diff --git a/sim/erc32/erc32.c b/sim/erc32/erc32.c
index 6b771b4..8c0ddd3 100644
--- a/sim/erc32/erc32.c
+++ b/sim/erc32/erc32.c
@@ -296,11 +296,8 @@ static void gpt_reload_set (uint32 val);
static void timer_ctrl (uint32 val);
static unsigned char *
get_mem_ptr (uint32 addr, uint32 size);
-
-static void fetch_bytes (int asi, unsigned char *mem,
- uint32 *data, int sz);
-
-static void store_bytes (unsigned char *mem, uint32 *data, int sz);
+static void store_bytes (unsigned char *mem, uint32 waddr,
+ uint32 *data, int sz, int32 *ws);
extern int ext_irl;
@@ -1524,123 +1521,43 @@ timer_ctrl(val)
gpt_start();
}
-
-/* Retrieve data from target memory. MEM points to location from which
- to read the data; DATA points to words where retrieved data will be
- stored in host byte order. SZ contains log(2) of the number of bytes
- to retrieve, and can be 0 (1 byte), 1 (one half-word), 2 (one word),
- or 3 (two words). */
+/* Store data in host byte order. MEM points to the beginning of the
+ emulated memory; WADDR contains the index the emulated memory,
+ DATA points to words in host byte order to be stored. SZ contains log(2)
+ of the number of bytes to retrieve, and can be 0 (1 byte), 1 (one half-word),
+ 2 (one word), or 3 (two words); WS should return the number of wait-states. */
static void
-fetch_bytes (asi, mem, data, sz)
- int asi;
+store_bytes (mem, waddr, data, sz, ws)
unsigned char *mem;
+ uint32 waddr;
uint32 *data;
- int sz;
+ int32 sz;
+ int32 *ws;
{
- if (CURRENT_TARGET_BYTE_ORDER == BIG_ENDIAN
- || asi == 8 || asi == 9) {
- switch (sz) {
- case 3:
- data[1] = (((uint32) mem[7]) & 0xff) |
- ((((uint32) mem[6]) & 0xff) << 8) |
- ((((uint32) mem[5]) & 0xff) << 16) |
- ((((uint32) mem[4]) & 0xff) << 24);
- /* Fall through to 2 */
- case 2:
- data[0] = (((uint32) mem[3]) & 0xff) |
- ((((uint32) mem[2]) & 0xff) << 8) |
- ((((uint32) mem[1]) & 0xff) << 16) |
- ((((uint32) mem[0]) & 0xff) << 24);
- break;
- case 1:
- data[0] = (((uint32) mem[1]) & 0xff) |
- ((((uint32) mem[0]) & 0xff) << 8);
- break;
+ switch (sz) {
case 0:
- data[0] = mem[0] & 0xff;
- break;
-
- }
- } else {
- switch (sz) {
- case 3:
- data[1] = ((((uint32) mem[7]) & 0xff) << 24) |
- ((((uint32) mem[6]) & 0xff) << 16) |
- ((((uint32) mem[5]) & 0xff) << 8) |
- (((uint32) mem[4]) & 0xff);
- /* Fall through to 4 */
- case 2:
- data[0] = ((((uint32) mem[3]) & 0xff) << 24) |
- ((((uint32) mem[2]) & 0xff) << 16) |
- ((((uint32) mem[1]) & 0xff) << 8) |
- (((uint32) mem[0]) & 0xff);
+#ifdef HOST_LITTLE_ENDIAN
+ waddr ^= 3;
+#endif
+ mem[waddr] = *data & 0x0ff;
+ *ws = mem_ramw_ws + 3;
break;
case 1:
- data[0] = ((((uint32) mem[1]) & 0xff) << 8) |
- (((uint32) mem[0]) & 0xff);
- break;
- case 0:
- data[0] = mem[0] & 0xff;
+#ifdef HOST_LITTLE_ENDIAN
+ waddr ^= 2;
+#endif
+ memcpy(&mem[waddr], data, 2);
+ *ws = mem_ramw_ws + 3;
break;
- }
- }
-}
-
-
-/* Store data in target byte order. MEM points to location to store data;
- DATA points to words in host byte order to be stored. SZ contains log(2)
- of the number of bytes to retrieve, and can be 0 (1 byte), 1 (one half-word),
- 2 (one word), or 3 (two words). */
-
-static void
-store_bytes (mem, data, sz)
- unsigned char *mem;
- uint32 *data;
- int sz;
-{
- if (CURRENT_TARGET_BYTE_ORDER == LITTLE_ENDIAN) {
- switch (sz) {
- case 3:
- mem[7] = (data[1] >> 24) & 0xff;
- mem[6] = (data[1] >> 16) & 0xff;
- mem[5] = (data[1] >> 8) & 0xff;
- mem[4] = data[1] & 0xff;
- /* Fall through to 2 */
case 2:
- mem[3] = (data[0] >> 24) & 0xff;
- mem[2] = (data[0] >> 16) & 0xff;
- /* Fall through to 1 */
- case 1:
- mem[1] = (data[0] >> 8) & 0xff;
- /* Fall through to 0 */
- case 0:
- mem[0] = data[0] & 0xff;
+ memcpy(&mem[waddr], data, 4);
+ *ws = mem_ramw_ws;
break;
- }
- } else {
- switch (sz) {
case 3:
- mem[7] = data[1] & 0xff;
- mem[6] = (data[1] >> 8) & 0xff;
- mem[5] = (data[1] >> 16) & 0xff;
- mem[4] = (data[1] >> 24) & 0xff;
- /* Fall through to 2 */
- case 2:
- mem[3] = data[0] & 0xff;
- mem[2] = (data[0] >> 8) & 0xff;
- mem[1] = (data[0] >> 16) & 0xff;
- mem[0] = (data[0] >> 24) & 0xff;
- break;
- case 1:
- mem[1] = data[0] & 0xff;
- mem[0] = (data[0] >> 8) & 0xff;
- break;
- case 0:
- mem[0] = data[0] & 0xff;
+ memcpy(&mem[waddr], data, 8);
+ *ws = 2 * mem_ramw_ws + STD_WS;
break;
-
- }
}
}
@@ -1670,7 +1587,7 @@ memory_read(asi, addr, data, sz, ws)
#endif
if ((addr >= mem_ramstart) && (addr < (mem_ramstart + mem_ramsz))) {
- fetch_bytes (asi, &ramb[addr & mem_rammask], data, sz);
+ memcpy(data, &ramb[addr & mem_rammask & ~3], 4);
*ws = mem_ramr_ws;
return (0);
} else if ((addr >= MEC_START) && (addr < MEC_END)) {
@@ -1688,7 +1605,7 @@ memory_read(asi, addr, data, sz, ws)
} else if (era) {
if ((addr < 0x100000) ||
((addr>= 0x80000000) && (addr < 0x80100000))) {
- fetch_bytes (asi, &romb[addr & ROM_MASK], data, sz);
+ memcpy(data, &romb[addr & ROM_MASK & ~3], 4);
*ws = 4;
return (0);
} else if ((addr >= 0x10000000) &&
@@ -1699,13 +1616,15 @@ memory_read(asi, addr, data, sz, ws)
}
} else if (addr < mem_romsz) {
- fetch_bytes (asi, &romb[addr], data, sz);
+ *data = *((uint32 *) & (romb[addr & ~3]));
+ memcpy(data, &romb[addr & ~3], 4);
*ws = mem_romr_ws;
return (0);
#else
} else if (addr < mem_romsz) {
- fetch_bytes (asi, &romb[addr], data, sz);
+ *data = *((uint32 *) & (romb[addr & ~3]));
+ memcpy(data, &romb[addr & ~3], 4);
*ws = mem_romr_ws;
return (0);
#endif
@@ -1768,21 +1687,10 @@ memory_write(asi, addr, data, sz, ws)
}
}
- store_bytes (&ramb[addr & mem_rammask], data, sz);
-
- switch (sz) {
- case 0:
- case 1:
- *ws = mem_ramw_ws + 3;
- break;
- case 2:
- *ws = mem_ramw_ws;
- break;
- case 3:
- *ws = 2 * mem_ramw_ws + STD_WS;
- break;
- }
+ waddr = addr & mem_rammask;
+ store_bytes (ramb, waddr, data, sz, ws);
return (0);
+
} else if ((addr >= MEC_START) && (addr < MEC_END)) {
if ((sz != 2) || (asi != 0xb)) {
set_sfsr(MEC_ACC, addr, asi, 0);
@@ -1805,7 +1713,7 @@ memory_write(asi, addr, data, sz, ws)
((addr < 0x100000) || ((addr >= 0x80000000) && (addr < 0x80100000)))) {
addr &= ROM_MASK;
*ws = sz == 3 ? 8 : 4;
- store_bytes (&romb[addr], data, sz);
+ store_bytes (romb, addr, data, sz, ws);
return (0);
} else if ((addr >= 0x10000000) &&
(addr < (0x10000000 + (512 << (mec_iocr & 0x0f)))) &&
@@ -1821,7 +1729,7 @@ memory_write(asi, addr, data, sz, ws)
*ws = mem_romw_ws + 1;
if (sz == 3)
*ws += mem_romw_ws + STD_WS;
- store_bytes (&romb[addr], data, sz);
+ store_bytes (romb, addr, data, sz, ws);
return (0);
#else
@@ -1832,7 +1740,7 @@ memory_write(asi, addr, data, sz, ws)
*ws = mem_romw_ws + 1;
if (sz == 3)
*ws += mem_romw_ws + STD_WS;
- store_bytes (&romb[addr], data, sz);
+ store_bytes (romb, addr, data, sz, ws);
return (0);
#endif
diff --git a/sim/erc32/exec.c b/sim/erc32/exec.c
index 275218a..38e1045 100644
--- a/sim/erc32/exec.c
+++ b/sim/erc32/exec.c
@@ -370,8 +370,38 @@ div64 (uint32 n1_hi, uint32 n1_low, uint32 n2, uint32 *result, int msigned)
}
+static int
+extract_short (uint32 data, uint32 address)
+{
+ return ((data >> ((2 - (address & 2)) * 8)) & 0xffff);
+}
+
+static int
+extract_short_signed (uint32 data, uint32 address)
+{
+ uint32 tmp = ((data >> ((2 - (address & 2)) * 8)) & 0xffff);
+ if (tmp & 0x8000)
+ tmp |= 0xffff0000;
+ return tmp;
+}
+
+static int
+extract_byte (uint32 data, uint32 address)
+{
+ return ((data >> ((3 - (address & 3)) * 8)) & 0xff);
+}
+
+static int
+extract_byte_signed (uint32 data, uint32 address)
+{
+ uint32 tmp = ((data >> ((3 - (address & 3)) * 8)) & 0xff);
+ if (tmp & 0x80)
+ tmp |= 0xffffff00;
+ return tmp;
+}
+
int
-dispatch_instruction(sregs)
+dispatch_instruction (sregs)
struct pstate *sregs;
{
@@ -1077,7 +1107,8 @@ dispatch_instruction(sregs)
sregs->trap = TRAP_PRIVI;
break;
}
- sregs->psr = (rs1 ^ operand2) & 0x00f03fff;
+ sregs->psr = (sregs->psr & 0xff000000) |
+ (rs1 ^ operand2) & 0x00f03fff;
break;
case WRWIM:
if (!(sregs->psr & PSR_S)) {
@@ -1213,8 +1244,10 @@ dispatch_instruction(sregs)
else
rdd = &(sregs->g[rd]);
}
- mexc = memory_read(asi, address, ddata, 3, &ws);
- sregs->hold += ws * 2;
+ mexc = memory_read(asi, address, ddata, 2, &ws);
+ sregs->hold += ws;
+ mexc |= memory_read(asi, address+4, &ddata[1], 2, &ws);
+ sregs->hold += ws;
sregs->icnt = T_LDD;
if (mexc) {
sregs->trap = TRAP_DEXC;
@@ -1252,6 +1285,7 @@ dispatch_instruction(sregs)
sregs->trap = TRAP_DEXC;
break;
}
+ data = extract_byte(data, address);
*rdd = data;
data = 0x0ff;
mexc = memory_write(asi, address, &data, 0, &ws);
@@ -1274,8 +1308,10 @@ dispatch_instruction(sregs)
sregs->trap = TRAP_DEXC;
break;
}
- if ((op3 == LDSB) && (data & 0x80))
- data |= 0xffffff00;
+ if (op3 == LDSB)
+ data = extract_byte_signed(data, address);
+ else
+ data = extract_byte(data, address);
*rdd = data;
break;
case LDSHA:
@@ -1293,8 +1329,10 @@ dispatch_instruction(sregs)
sregs->trap = TRAP_DEXC;
break;
}
- if ((op3 == LDSH) && (data & 0x8000))
- data |= 0xffff0000;
+ if (op3 == LDSH)
+ data = extract_short_signed(data, address);
+ else
+ data = extract_short(data, address);
*rdd = data;
break;
case LDF:
@@ -1337,8 +1375,10 @@ dispatch_instruction(sregs)
((sregs->frs2 >> 1) == (rd >> 1)))
sregs->fhold += (sregs->ftime - ebase.simtime);
}
- mexc = memory_read(asi, address, ddata, 3, &ws);
- sregs->hold += ws * 2;
+ mexc = memory_read(asi, address, ddata, 2, &ws);
+ sregs->hold += ws;
+ mexc |= memory_read(asi, address+4, &ddata[1], 2, &ws);
+ sregs->hold += ws;
sregs->icnt = T_LDD;
if (mexc) {
sregs->trap = TRAP_DEXC;
diff --git a/sim/erc32/func.c b/sim/erc32/func.c
index e42b0ec..122ce64 100644
--- a/sim/erc32/func.c
+++ b/sim/erc32/func.c
@@ -29,7 +29,7 @@
#include <dis-asm.h>
#include "sim-config.h"
#include <inttypes.h>
-
+#include <sim-basics.h>
#define VAL(x) strtoul(x,(char **)NULL,0)
@@ -787,15 +787,15 @@ disp_ctrl(sregs)
struct pstate *sregs;
{
- unsigned char i[4];
+ uint32 i;
printf("\n psr: %08X wim: %08X tbr: %08X y: %08X\n",
sregs->psr, sregs->wim, sregs->tbr, sregs->y);
- sis_memory_read(sregs->pc, i, 4);
- printf("\n pc: %08X = %02X%02X%02X%02X ", sregs->pc,i[0],i[1],i[2],i[3]);
+ sis_memory_read(sregs->pc, (char *) &i, 4);
+ printf("\n pc: %08X = %08X ", sregs->pc, i);
print_insn_sparc_sis(sregs->pc, &dinfo);
- sis_memory_read(sregs->npc, i, 4);
- printf("\n npc: %08X = %02X%02X%02X%02X ",sregs->npc,i[0],i[1],i[2],i[3]);
+ sis_memory_read(sregs->npc, (char *) &i, 4);
+ printf("\n npc: %08X = %08X ", sregs->npc, i);
print_insn_sparc_sis(sregs->npc, &dinfo);
if (sregs->err_mode)
printf("\n IU in error mode");
@@ -809,22 +809,31 @@ disp_mem(addr, len)
{
uint32 i;
- unsigned char data[4];
+ union {
+ unsigned char u8[4];
+ uint32 u32;
+ } data;
uint32 mem[4], j;
char *p;
+ int end;
+#ifdef HOST_LITTLE_ENDIAN
+ end = 3;
+#else
+ end = 0;
+#endif
for (i = addr & ~3; i < ((addr + len) & ~3); i += 16) {
printf("\n %8X ", i);
for (j = 0; j < 4; j++) {
- sis_memory_read((i + (j * 4)), data, 4);
- printf("%02x%02x%02x%02x ", data[0],data[1],data[2],data[3]);
- mem[j] = *((int *) &data);
+ sis_memory_read((i + (j * 4)), data.u8, 4);
+ printf("%08x ", data.u32);
+ mem[j] = data.u32;
}
printf(" ");
p = (char *) mem;
for (j = 0; j < 16; j++) {
- if (isprint(p[j]))
- putchar(p[j]);
+ if (isprint(p[j ^ end]))
+ putchar(p[j ^ end]);
else
putchar('.');
}
@@ -839,11 +848,14 @@ dis_mem(addr, len, info)
struct disassemble_info *info;
{
uint32 i;
- unsigned char data[4];
+ union {
+ unsigned char u8[4];
+ uint32 u32;
+ } data;
for (i = addr & -3; i < ((addr & -3) + (len << 2)); i += 4) {
- sis_memory_read(i, data, 4);
- printf(" %08x %02x%02x%02x%02x ", i, data[0],data[1],data[2],data[3]);
+ sis_memory_read(i, data.u8, 4);
+ printf(" %08x %08x ", i, data.u32);
print_insn_sparc_sis(i, info);
if (i >= 0xfffffffc) break;
printf("\n");
@@ -1042,6 +1054,7 @@ bfd_load(fname)
asection *section;
bfd *pbfd;
const bfd_arch_info_type *arch;
+ int i;
pbfd = bfd_openr(fname, 0);
@@ -1115,14 +1128,20 @@ bfd_load(fname)
fptr = 0;
while (section_size > 0) {
- char buffer[1024];
int count;
+ union {
+ unsigned char u8[1024];
+ uint32 u32[256];
+ } buffer;
count = min(section_size, 1024);
- bfd_get_section_contents(pbfd, section, buffer, fptr, count);
+ bfd_get_section_contents(pbfd, section, buffer.u8, fptr, count);
- sis_memory_write(section_address, buffer, count);
+#ifdef HOST_LITTLE_ENDIAN
+ for (i = 0; i < (count / 4); i++) buffer.u32[i] = T2H_4(buffer.u32[i]); // endian swap
+#endif
+ sis_memory_write(section_address, buffer.u8, count);
section_address += count;
fptr += count;
diff --git a/sim/erc32/interf.c b/sim/erc32/interf.c
index 608b224..97540a9 100644
--- a/sim/erc32/interf.c
+++ b/sim/erc32/interf.c
@@ -30,6 +30,7 @@
#include "bfd.h"
#include <dis-asm.h>
#include "sim-config.h"
+#include <sim-basics.h>
#include "gdb/remote-sim.h"
#include "gdb/signals.h"
@@ -266,7 +267,11 @@ sim_open (kind, callback, abfd, argv)
sregs.freq = freq ? freq : 15;
termsave = fcntl(0, F_GETFL, 0);
INIT_DISASSEMBLE_INFO(dinfo, stdout,(fprintf_ftype)fprintf);
+#ifdef HOST_LITTLE_ENDIAN
+ dinfo.endian = BFD_ENDIAN_LITTLE;
+#else
dinfo.endian = BFD_ENDIAN_BIG;
+#endif
reset_all();
ebase.simtime = 0;
init_sim();
@@ -356,7 +361,19 @@ sim_write(sd, mem, buf, length)
const unsigned char *buf;
int length;
{
+#ifdef HOST_LITTLE_ENDIAN
+ int *ibufp = (int *) buf;
+ int ibuf[8192];
+ int i, len;
+
+ if (length >= 4)
+ for (i = 0; i < length; i += 4) {
+ ibuf[i] = T2H_4(ibufp[i]);
+ }
+ return (sis_memory_write(mem, (char *) ibuf, length));
+#else
return (sis_memory_write(mem, buf, length));
+#endif
}
int
@@ -366,7 +383,20 @@ sim_read(sd, mem, buf, length)
unsigned char *buf;
int length;
{
+#ifdef HOST_LITTLE_ENDIAN
+ int *ibuf = (int *) buf;
+ int i, len;
+
+ len = sis_memory_read(mem, buf, length);
+ if (length >= 4)
+ for (i = 0; i < length; i += 4) {
+ *ibuf = H2T_4(*ibuf);
+ ibuf++;
+ }
+ return (len);
+#else
return (sis_memory_read(mem, buf, length));
+#endif
}
void
diff --git a/sim/erc32/sim-main.c b/sim/erc32/sim-main.c
new file mode 100644
index 0000000..860e7db
--- /dev/null
+++ b/sim/erc32/sim-main.c
@@ -0,0 +1,26 @@
+/* SIS, SPARC instruction simulator
+
+ Copyright 2002-2015 Free Software Foundation, Inc.
+
+ Contributed by Jiri Gaisler.
+
+ This file is part of GDB.
+
+ This program is free software; you can redistribute it and/or modify
+ it under the terms of the GNU General Public License as published by
+ the Free Software Foundation; either version 3 of the License, or
+ (at your option) any later version.
+
+ This program is distributed in the hope that it will be useful,
+ but WITHOUT ANY WARRANTY; without even the implied warranty of
+ MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ GNU General Public License for more details.
+
+ You should have received a copy of the GNU General Public License
+ along with this program. If not, see <http://www.gnu.org/licenses/>. */
+
+
+#include <sim-assert.h>
+#undef ASSERT
+#define ASSERT(x) if (0) {}
+#include <sim-endian.c>
diff --git a/sim/erc32/sis.c b/sim/erc32/sis.c
index 931e3f3..dcb5ebf 100644
--- a/sim/erc32/sis.c
+++ b/sim/erc32/sis.c
@@ -227,7 +227,11 @@ main(argc, argv)
sregs.freq = freq;
INIT_DISASSEMBLE_INFO(dinfo, stdout, (fprintf_ftype) fprintf);
+#ifdef HOST_LITTLE_ENDIAN
+ dinfo.endian = BFD_ENDIAN_LITTLE;
+#else
dinfo.endian = BFD_ENDIAN_BIG;
+#endif
termsave = fcntl(0, F_GETFL, 0);
using_history();
--
1.9.1
next prev parent reply other threads:[~2015-03-17 21:03 UTC|newest]
Thread overview: 31+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-03-17 21:03 [PATCH v4 00/13] Update of the SPARC SIS simulator Jiri Gaisler
2015-03-17 21:03 ` [PATCH v4 05/13] sim/erc32: Fix a few compiler warnings Jiri Gaisler
2015-03-28 7:06 ` Mike Frysinger
2015-03-17 21:03 ` [PATCH v4 09/13] sim/erc32: Add support for LEON3 processor emulation Jiri Gaisler
2015-03-17 21:03 ` Jiri Gaisler [this message]
2015-03-22 22:46 ` [PATCH v4 03/13] sim/erc32: Switched emulated memory to host endian order Mike Frysinger
2015-03-23 9:01 ` Jiri Gaisler
2015-03-28 7:41 ` Mike Frysinger
2015-03-28 8:21 ` Jiri Gaisler
2015-03-24 9:39 ` Jiri Gaisler
2015-03-27 10:26 ` Jiri Gaisler
2015-03-17 21:03 ` [PATCH v4 04/13] sim/erc32: Use memory_iread() function for instruction fetching Jiri Gaisler
2015-03-28 7:01 ` Mike Frysinger
2015-03-17 21:03 ` [PATCH v4 12/13] sim/erc32: Add data watchpoint support Jiri Gaisler
2015-03-28 7:16 ` Mike Frysinger
2015-03-17 21:03 ` [PATCH v4 01/13] sim/erc32: Added -v command line switch for verbose output Jiri Gaisler
2015-03-17 22:56 ` Mike Frysinger
2015-03-17 21:03 ` [PATCH v4 07/13] sim/erc32: Access memory subsystem through struct memsys Jiri Gaisler
2015-03-28 7:15 ` Mike Frysinger
2015-03-17 21:03 ` [PATCH v4 06/13] sim/erc32: Use gdb callback for UART I/O when linked with gdb Jiri Gaisler
2015-03-28 7:13 ` Mike Frysinger
2015-03-17 21:03 ` [PATCH v4 02/13] sim/erc32: Removed type mismatch compiler warnings Jiri Gaisler
2015-03-17 22:59 ` Mike Frysinger
2015-03-17 21:03 ` [PATCH v4 10/13] sim/erc32: Add support for LEON2 processor emulation Jiri Gaisler
2015-03-28 7:21 ` Mike Frysinger
2015-03-17 21:03 ` [PATCH v4 11/13] sim/erc32: Updated documentation Jiri Gaisler
2015-03-28 7:17 ` Mike Frysinger
2015-03-17 21:04 ` [PATCH v4 13/13] Add watchpoint support to gdb simulator interface Jiri Gaisler
2015-03-28 7:19 ` Mike Frysinger
2015-03-30 20:51 ` Jiri Gaisler
2015-03-17 21:04 ` [PATCH v4 08/13] sim/erc32: Move local extern declarations into sis.h Jiri Gaisler
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1426626170-21401-4-git-send-email-jiri@gaisler.se \
--to=jiri@gaisler.se \
--cc=gdb-patches@sourceware.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox