From: Thiago Jung Bauermann <bauerman@br.ibm.com>
To: Daniel Jacobowitz <drow@false.org>
Cc: gdb-patches@sourceware.org
Subject: Re: [patch 2/4] decimal floating point types
Date: Mon, 15 Oct 2007 18:12:00 -0000 [thread overview]
Message-ID: <1192471909.5787.45.camel@localhost.localdomain> (raw)
In-Reply-To: <20071011155721.GB22982@caradoc.them.org>
[-- Attachment #1: Type: text/plain, Size: 1888 bytes --]
On Thu, 2007-10-11 at 11:57 -0400, Daniel Jacobowitz wrote:
> On Thu, Sep 20, 2007 at 06:54:12PM -0300, Thiago Jung Bauermann wrote:
> > + case DW_ATE_decimal_float:
> > + if (size == 16)
> > + {
> > + type = dwarf2_fundamental_type (objfile, FT_DBL_PREC_DECFLOAT, cu);
> > + }
> > + else if (size == 8)
> > + {
> > + type = dwarf2_fundamental_type (objfile, FT_EXT_PREC_DECFLOAT, cu);
> > + }
> > + else
> > + type = dwarf2_fundamental_type (objfile, FT_DECFLOAT, cu);
> > + return type;
>
> You don't need a bunch of those extra braces.
Right. Removed.
> > + /* The following three are about decimal floating point types, which
> > + are 32-bits, 64-bits and 128-bits respectively. */
> > + builtin_type->builtin_decfloat =
> > + init_type (TYPE_CODE_DECFLOAT, 32 / 8,
> > + 0,
> > + "decimal float", (struct objfile *) NULL);
>
> I think our convention is to put the equals sign after the line break.
Most of the types in gdbtypes_post_init have the equals sign at the end
of the line, so this code was being consistent with them. But you're
right, the GNU Coding Standards say to break a line before an operator.
Changed.
> > void
> > +print_decimal_floating (const gdb_byte *valaddr, struct type *type,
> > + struct ui_file *stream)
> > +{
> > + char decstr[128];
> > + unsigned len = TYPE_LENGTH (type);
> > +
> > + decimal_to_string (valaddr, len, decstr);
> > + fputs_filtered (decstr, stream);
> > + return;
> > +}
>
> Does the libdecnumber API specify that 128 bytes is enough? If so
> this should be a constant in dfp.h.
Actually, I just found out that libdecnumber specifies a lower limit: 43
(including the '\0' at the end), so I created a MAX_DECIMAL_STRING
constant in dfp.h and use that here.
What do you think of this version?
--
[]'s
Thiago Jung Bauermann
Software Engineer
IBM Linux Technology Center
[-- Attachment #2: decfloat-types.diff --]
[-- Type: text/x-patch, Size: 8234 bytes --]
Subject: decimal floating point types
2007-10-15 Wu Zhou <woodzltc@cn.ibm.com>
Thiago Jung Bauermann <bauerman@br.ibm.com>
* c-lang.c (c_create_fundamental_type): Create fundamental
types for DFP.
* c-typeprint.c (c_type_print_varspec_prefix): Add
TYPE_CODE_DECFLOAT to no prefix needed case.
(c_type_print_varspec_suffix): Add TYPE_CODE_DECFLOAT to no
suffix needed case.
* c-valprint.c (c_val_print): Call print_decimal_floating to
print DFP values.
* dwarf2read.c (read_base_type): Read DW_ATE_decimal_float
attribute code and return TYPE_CODE_DECFLOAT.
(dwarf_base_type): Set dwarf2_fundamental_type for DFP values.
* gdbtypes.c (gdbtypes_post_init): Initialize builtin_decfloat,
builtin_decdouble and builtin_declong.
* gdbtypes.h (enum type_code): Add TYPE_CODE_DECFLOAT as a
type code for DFP.
(FT_DECFLOAT, FT_DBL_PREC_DECFLOAT, FT_EXT_PREC_DECFLOAT): New
types, for decimal floating point.
(FT_NUM_MEMBERS): Increment, new types added.
(struct builtin_type): Add builtin_decfloat, builtin_decdouble
and builtin_declong.
* valprint.c (print_decimal_floating): New function to print DFP
values.
* value.h (print_decimal_floating): Prototype.
Index: gdb/c-lang.c
===================================================================
--- gdb/c-lang.c.orig 2007-09-25 23:45:17.000000000 -0300
+++ gdb/c-lang.c 2007-10-15 14:35:18.000000000 -0200
@@ -325,6 +325,21 @@ c_create_fundamental_type (struct objfil
/ TARGET_CHAR_BIT,
0, "long double", objfile);
break;
+ case FT_DECFLOAT:
+ type = init_type (TYPE_CODE_DECFLOAT,
+ 32 / 8,
+ 0, "decimal float", objfile);
+ break;
+ case FT_DBL_PREC_DECFLOAT:
+ type = init_type (TYPE_CODE_DECFLOAT,
+ 64 / 8,
+ 0, "decimal double", objfile);
+ break;
+ case FT_EXT_PREC_DECFLOAT:
+ type = init_type (TYPE_CODE_DECFLOAT,
+ 128 / 8,
+ 0, "decimal long double", objfile);
+ break;
case FT_COMPLEX:
type = init_type (TYPE_CODE_FLT,
2 * gdbarch_float_bit (current_gdbarch)
Index: gdb/c-valprint.c
===================================================================
--- gdb/c-valprint.c.orig 2007-09-25 23:45:18.000000000 -0300
+++ gdb/c-valprint.c 2007-10-15 14:35:18.000000000 -0200
@@ -474,6 +474,13 @@ c_val_print (struct type *type, const gd
}
break;
+ case TYPE_CODE_DECFLOAT:
+ if (format)
+ print_scalar_formatted (valaddr + embedded_offset, type, format, 0, stream);
+ else
+ print_decimal_floating (valaddr + embedded_offset, type, stream);
+ break;
+
case TYPE_CODE_VOID:
fprintf_filtered (stream, "void");
break;
Index: gdb/dwarf2read.c
===================================================================
--- gdb/dwarf2read.c.orig 2007-09-27 20:26:54.000000000 -0300
+++ gdb/dwarf2read.c 2007-10-15 14:35:18.000000000 -0200
@@ -4869,6 +4869,9 @@ read_base_type (struct die_info *die, st
case DW_ATE_complex_float:
code = TYPE_CODE_COMPLEX;
break;
+ case DW_ATE_decimal_float:
+ code = TYPE_CODE_DECFLOAT;
+ break;
case DW_ATE_float:
code = TYPE_CODE_FLT;
break;
@@ -7756,6 +7759,14 @@ dwarf_base_type (int encoding, int size,
type = dwarf2_fundamental_type (objfile, FT_FLOAT, cu);
}
return type;
+ case DW_ATE_decimal_float:
+ if (size == 16)
+ type = dwarf2_fundamental_type (objfile, FT_DBL_PREC_DECFLOAT, cu);
+ else if (size == 8)
+ type = dwarf2_fundamental_type (objfile, FT_EXT_PREC_DECFLOAT, cu);
+ else
+ type = dwarf2_fundamental_type (objfile, FT_DECFLOAT, cu);
+ return type;
case DW_ATE_signed:
switch (size)
{
Index: gdb/gdbtypes.c
===================================================================
--- gdb/gdbtypes.c.orig 2007-10-09 11:22:47.000000000 -0300
+++ gdb/gdbtypes.c 2007-10-15 14:35:18.000000000 -0200
@@ -3506,6 +3506,21 @@ gdbtypes_post_init (struct gdbarch *gdba
0,
"bool", (struct objfile *) NULL);
+ /* The following three are about decimal floating point types, which
+ are 32-bits, 64-bits and 128-bits respectively. */
+ builtin_type->builtin_decfloat
+ = init_type (TYPE_CODE_DECFLOAT, 32 / 8,
+ 0,
+ "decimal float", (struct objfile *) NULL);
+ builtin_type->builtin_decdouble
+ = init_type (TYPE_CODE_DECFLOAT, 64 / 8,
+ 0,
+ "decimal double", (struct objfile *) NULL);
+ builtin_type->builtin_declong
+ = init_type (TYPE_CODE_DECFLOAT, 128 / 8,
+ 0,
+ "decimal long double", (struct objfile *) NULL);
+
/* Pointer/Address types. */
/* NOTE: on some targets, addresses and pointers are not necessarily
Index: gdb/gdbtypes.h
===================================================================
--- gdb/gdbtypes.h.orig 2007-09-25 23:45:18.000000000 -0300
+++ gdb/gdbtypes.h 2007-10-15 14:35:18.000000000 -0200
@@ -65,7 +65,12 @@ struct block;
#define FT_UNSIGNED_BYTE 27
#define FT_TEMPLATE_ARG 28
-#define FT_NUM_MEMBERS 29 /* Highest FT_* above, plus one. */
+/* The following three fundamental types are for decimal floating point. */
+#define FT_DECFLOAT 29
+#define FT_DBL_PREC_DECFLOAT 30
+#define FT_EXT_PREC_DECFLOAT 31
+
+#define FT_NUM_MEMBERS 32 /* Highest FT_* above, plus one. */
/* Some macros for char-based bitfields. */
@@ -169,7 +174,9 @@ enum type_code
TYPE_CODE_TEMPLATE, /* C++ template */
TYPE_CODE_TEMPLATE_ARG, /* C++ template arg */
- TYPE_CODE_NAMESPACE /* C++ namespace. */
+ TYPE_CODE_NAMESPACE, /* C++ namespace. */
+
+ TYPE_CODE_DECFLOAT /* Decimal floating point. */
};
/* For now allow source to use TYPE_CODE_CLASS for C++ classes, as an
@@ -1041,6 +1048,9 @@ struct builtin_type
struct type *builtin_bool;
struct type *builtin_long_long;
struct type *builtin_unsigned_long_long;
+ struct type *builtin_decfloat;
+ struct type *builtin_decdouble;
+ struct type *builtin_declong;
};
/* Return the type table for the specified architecture. */
Index: gdb/valprint.c
===================================================================
--- gdb/valprint.c.orig 2007-09-25 23:45:23.000000000 -0300
+++ gdb/valprint.c 2007-10-15 14:35:18.000000000 -0200
@@ -33,6 +33,7 @@
#include "floatformat.h"
#include "doublest.h"
#include "exceptions.h"
+#include "dfp.h"
#include <errno.h>
@@ -506,6 +507,18 @@ print_floating (const gdb_byte *valaddr,
}
void
+print_decimal_floating (const gdb_byte *valaddr, struct type *type,
+ struct ui_file *stream)
+{
+ char decstr[MAX_DECIMAL_STRING];
+ unsigned len = TYPE_LENGTH (type);
+
+ decimal_to_string (valaddr, len, decstr);
+ fputs_filtered (decstr, stream);
+ return;
+}
+
+void
print_binary_chars (struct ui_file *stream, const gdb_byte *valaddr,
unsigned len)
{
Index: gdb/value.h
===================================================================
--- gdb/value.h.orig 2007-10-15 14:25:14.000000000 -0200
+++ gdb/value.h 2007-10-15 14:35:46.000000000 -0200
@@ -492,6 +492,9 @@ extern void print_longest (struct ui_fil
extern void print_floating (const gdb_byte *valaddr, struct type *type,
struct ui_file *stream);
+extern void print_decimal_floating (const gdb_byte *valaddr, struct type *type,
+ struct ui_file *stream);
+
extern int value_print (struct value *val, struct ui_file *stream, int format,
enum val_prettyprint pretty);
Index: gdb/c-typeprint.c
===================================================================
--- gdb/c-typeprint.c.orig 2007-09-25 23:45:18.000000000 -0300
+++ gdb/c-typeprint.c 2007-10-15 14:35:18.000000000 -0200
@@ -277,6 +277,7 @@ c_type_print_varspec_prefix (struct type
case TYPE_CODE_COMPLEX:
case TYPE_CODE_TEMPLATE:
case TYPE_CODE_NAMESPACE:
+ case TYPE_CODE_DECFLOAT:
/* These types need no prefix. They are listed here so that
gcc -Wall will reveal any types that haven't been handled. */
break;
@@ -599,6 +600,7 @@ c_type_print_varspec_suffix (struct type
case TYPE_CODE_COMPLEX:
case TYPE_CODE_TEMPLATE:
case TYPE_CODE_NAMESPACE:
+ case TYPE_CODE_DECFLOAT:
/* These types do not need a suffix. They are listed so that
gcc -Wall will report types that may not have been considered. */
break;
next prev parent reply other threads:[~2007-10-15 18:11 UTC|newest]
Thread overview: 23+ messages / expand[flat|nested] mbox.gz Atom feed top
2007-09-20 21:57 [patch 0/4] decimal floating point support Thiago Jung Bauermann
2007-09-20 21:57 ` [patch 2/4] decimal floating point types Thiago Jung Bauermann
2007-10-11 16:00 ` Daniel Jacobowitz
2007-10-15 18:12 ` Thiago Jung Bauermann [this message]
2007-10-24 20:11 ` Daniel Jacobowitz
2007-10-25 18:24 ` Thiago Jung Bauermann
2007-09-20 21:57 ` [patch 4/4] decimal floating point testcases Thiago Jung Bauermann
2007-10-11 16:19 ` Daniel Jacobowitz
2007-10-15 18:12 ` Thiago Jung Bauermann
2007-10-25 18:22 ` Thiago Jung Bauermann
2007-09-20 21:57 ` [patch 3/4] decimal floating point support for expressions Thiago Jung Bauermann
2007-10-11 16:18 ` Daniel Jacobowitz
2007-10-15 18:12 ` Thiago Jung Bauermann
2007-10-24 20:12 ` Daniel Jacobowitz
2007-10-25 18:40 ` Thiago Jung Bauermann
2007-09-20 21:57 ` [patch 1/4] libdecnumber support Thiago Jung Bauermann
2007-10-11 15:57 ` Daniel Jacobowitz
2007-10-11 16:07 ` Daniel Jacobowitz
2007-10-15 18:32 ` Thiago Jung Bauermann
2007-10-15 18:11 ` Thiago Jung Bauermann
2007-10-15 18:38 ` Daniel Jacobowitz
2007-10-25 18:23 ` Thiago Jung Bauermann
[not found] <20070323030737.475073862@br.ibm.com>
2007-03-27 16:30 ` [patch 2/4] decimal floating point types Thiago Jung Bauermann
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1192471909.5787.45.camel@localhost.localdomain \
--to=bauerman@br.ibm.com \
--cc=drow@false.org \
--cc=gdb-patches@sourceware.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox