From: compudj@krystal.dyndns.org (Mathieu Desnoyers)
Subject: [ltt-dev] [PATCH 2/2] Update test-case for tracepoints and add a new test-case
Date: Thu, 2 Sep 2010 10:56:11 -0400 [thread overview]
Message-ID: <20100902145610.GA18925@Krystal> (raw)
In-Reply-To: <913BC6918ED247478A38326BC12AAECE035CFEB3@ESESSCMS0358.eemea.ericsson.se>
* Nils Carlson (nils.carlson at ericsson.com) wrote:
> Jep, exactly that, multiple probes with different data. Didn't try
> adding with different functions.
Could be good to add the "multiple functions" test case eventually. But
so far, this patch looks good.
Acked-by: Mathieu Desnoyers <mathieu.desnoyers at efficios.com>
>
> -----Original Message-----
> From: Mathieu Desnoyers [mailto:compudj@krystal.dyndns.org]
> Sent: den 2 september 2010 16:09
> To: Nils Carlson
> Cc: ltt-dev at lists.casi.polymtl.ca
> Subject: Re: [ltt-dev] [PATCH 2/2] Update test-case for tracepoints and add a new test-case
>
> * Nils Carlson (nils.carlson at ericsson.com) wrote:
> > Update the test-case for probes to handle a new data pointer in the
> > probe function. Also add a new test-case that stress-tests probe
> > registration and unregistration.
>
> Does it test reg. of multiple probes on a tracepoint ?
>
> Mathieu
>
> > ---
> > configure.ac | 1 +
> > tests/Makefile.am | 2 +-
> > tests/hello/hello.c | 2 +-
> > tests/hello/tp.c | 18 +++++--
> > tests/register_test/Makefile.am | 5 ++
> > tests/register_test/register_test.c | 97 +++++++++++++++++++++++++++++++++++
> > tests/register_test/tp.h | 22 ++++++++
> > 7 files changed, 141 insertions(+), 6 deletions(-) create mode
> > 100644 tests/register_test/Makefile.am create mode 100644
> > tests/register_test/register_test.c
> > create mode 100644 tests/register_test/tp.h
> >
> > diff --git a/configure.ac b/configure.ac index dee974f..10a02e0 100644
> > --- a/configure.ac
> > +++ b/configure.ac
> > @@ -122,6 +122,7 @@ AC_CONFIG_FILES([
> > tests/dlopen/Makefile
> > tests/same_line_marker/Makefile
> > tests/trace_event/Makefile
> > + tests/register_test/Makefile
> > libustinstr-malloc/Makefile
> > libustfork/Makefile
> > libustd/Makefile
> > diff --git a/tests/Makefile.am b/tests/Makefile.am index
> > ab13cd7..1d31c3f 100644
> > --- a/tests/Makefile.am
> > +++ b/tests/Makefile.am
> > @@ -1,3 +1,3 @@
> > -SUBDIRS = hello hello2 basic basic_long fork simple_include snprintf
> > test-nevents test-libustinstr-malloc dlopen same_line_marker
> > trace_event
> > +SUBDIRS = hello hello2 basic basic_long fork simple_include snprintf
> > +test-nevents test-libustinstr-malloc dlopen same_line_marker
> > +trace_event register_test
> >
> > dist_noinst_SCRIPTS = test_loop runtests trace_matches diff --git
> > a/tests/hello/hello.c b/tests/hello/hello.c index 86c5c71..8147860
> > 100644
> > --- a/tests/hello/hello.c
> > +++ b/tests/hello/hello.c
> > @@ -26,8 +26,8 @@
> >
> > #include <ust/marker.h>
> > #include "usterr.h"
> > -#include "tp.h"
> > #include "tracer.h"
> > +#include "tp.h"
> >
> > void inthandler(int sig)
> > {
> > diff --git a/tests/hello/tp.c b/tests/hello/tp.c index
> > be10615..3a4c6fc 100644
> > --- a/tests/hello/tp.c
> > +++ b/tests/hello/tp.c
> > @@ -19,16 +19,26 @@
> > #include <ust/marker.h>
> > #include "usterr.h"
> >
> > +struct hello_trace_struct {
> > + char *message;
> > +};
> > +
> > +struct hello_trace_struct hello_struct = {
> > + .message = "ehlo\n",
> > +};
> > +
> > DEFINE_TRACE(hello_tptest);
> >
> > -void tptest_probe(int anint)
> > +void tptest_probe(void *data, int anint)
> > {
> > + struct hello_trace_struct *hello;
> > + hello=(struct hello_trace_struct *)data;
> > DBG("in tracepoint probe...");
> > - trace_mark(ust, tptest, "anint %d", anint);
> > + printf("this is the message: %s\n", hello->message);
> > }
> >
> > static void __attribute__((constructor)) init() {
> > - DBG("connecting tracepoint...");
> > - register_trace_hello_tptest(tptest_probe);
> > + DBG("connecting tracepoint...\n");
> > + register_trace_hello_tptest(tptest_probe, &hello_struct);
> > }
> > diff --git a/tests/register_test/Makefile.am
> > b/tests/register_test/Makefile.am new file mode 100644 index
> > 0000000..ff25e08
> > --- /dev/null
> > +++ b/tests/register_test/Makefile.am
> > @@ -0,0 +1,5 @@
> > +AM_CPPFLAGS = -I$(top_srcdir)/include -I$(top_srcdir)/libust
> > +
> > +noinst_PROGRAMS = register_test
> > +register_test_SOURCES = register_test.c tp.h register_test_LDADD =
> > +$(top_builddir)/libust/libust.la $(top_builddir)/libust-initializer.o
> > diff --git a/tests/register_test/register_test.c
> > b/tests/register_test/register_test.c
> > new file mode 100644
> > index 0000000..8b65ffb
> > --- /dev/null
> > +++ b/tests/register_test/register_test.c
> > @@ -0,0 +1,97 @@
> > +/* Copyright (C) 2010 Nils Carlson
> > + *
> > + * This library is free software; you can redistribute it and/or
> > + * modify it under the terms of the GNU Lesser General Public
> > + * License as published by the Free Software Foundation; either
> > + * version 2.1 of the License, or (at your option) any later version.
> > + *
> > + * This library is distributed in the hope that it will be useful,
> > + * but WITHOUT ANY WARRANTY; without even the implied warranty of
> > + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
> > + * Lesser General Public License for more details.
> > + *
> > + * You should have received a copy of the GNU Lesser General Public
> > + * License along with this library; if not, write to the Free
> > +Software
> > + * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA
> > +02110-1301 USA */
> > +
> > +#include <stdio.h>
> > +#include <unistd.h>
> > +#include <sys/mman.h>
> > +#include <stdarg.h>
> > +#include <sys/types.h>
> > +#include <sys/stat.h>
> > +#include <sys/timerfd.h>
> > +#include <fcntl.h>
> > +#include <signal.h>
> > +#include <pthread.h>
> > +
> > +#include <ust/marker.h>
> > +#include "usterr.h"
> > +#include "tracer.h"
> > +#include "tp.h"
> > +
> > +DEFINE_TRACE(hello_tptest);
> > +
> > +
> > +struct hello_trace_struct {
> > + char *message;
> > +};
> > +
> > +struct hello_trace_struct hello_struct = {
> > + .message = "ehlo\n",
> > +};
> > +
> > +void tptest_probe(void *data, int anint) {
> > + struct hello_trace_struct *hello;
> > + char message[30];
> > + hello=(struct hello_trace_struct *)data;
> > + //printf("this is the message: %s\n", hello->message);
> > + snprintf(message, 30, "this is the %s\n", hello->message); }
> > +
> > +
> > +#define HELLO_LENGTH 100
> > +
> > +static void * register_thread_main(void *data) {
> > + int ret, i, j = 0;
> > +
> > + struct hello_trace_struct hello[HELLO_LENGTH];
> > +
> > + for (i=0; i<HELLO_LENGTH; i++) {
> > + hello[i].message = malloc(6*sizeof(char));
> > + hello[i].message[0] = 'a'+i%25;
> > + memcpy(&hello[i].message[1], "ello", 5);
> > + }
> > +
> > + for (i=0; i<1000; i++) {
> > + while (!register_trace_hello_tptest(tptest_probe,
> > + &hello[j%HELLO_LENGTH])) {
> > + usleep(10);
> > + j++;
> > + }
> > + printf("Registered all\n");
> > + while (!unregister_trace_hello_tptest(tptest_probe,
> > + &hello[j%HELLO_LENGTH])) {
> > + usleep(10);
> > + j++;
> > + }
> > + printf("Unregistered all\n");
> > + }
> > +}
> > +
> > +
> > +int main()
> > +{
> > + pthread_t register_thread;
> > + int i;
> > +
> > + pthread_create(®ister_thread, NULL, register_thread_main, NULL);
> > + for(i=0; i<1000000; i++) {
> > + trace_hello_tptest(i);
> > + }
> > +
> > + return 0;
> > +}
> > diff --git a/tests/register_test/tp.h b/tests/register_test/tp.h new
> > file mode 100644 index 0000000..f34f305
> > --- /dev/null
> > +++ b/tests/register_test/tp.h
> > @@ -0,0 +1,22 @@
> > +/* Copyright (C) 2009 Pierre-Marc Fournier
> > + *
> > + * This library is free software; you can redistribute it and/or
> > + * modify it under the terms of the GNU Lesser General Public
> > + * License as published by the Free Software Foundation; either
> > + * version 2.1 of the License, or (at your option) any later version.
> > + *
> > + * This library is distributed in the hope that it will be useful,
> > + * but WITHOUT ANY WARRANTY; without even the implied warranty of
> > + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
> > + * Lesser General Public License for more details.
> > + *
> > + * You should have received a copy of the GNU Lesser General Public
> > + * License along with this library; if not, write to the Free
> > +Software
> > + * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA
> > +02110-1301 USA */
> > +
> > +#include <ust/tracepoint.h>
> > +
> > +DECLARE_TRACE(hello_tptest,
> > + TP_PROTO(int anint),
> > + TP_ARGS(anint));
> > --
> > 1.7.1
> >
> >
> > _______________________________________________
> > ltt-dev mailing list
> > ltt-dev at lists.casi.polymtl.ca
> > http://lists.casi.polymtl.ca/cgi-bin/mailman/listinfo/ltt-dev
> >
>
> --
> Mathieu Desnoyers
> Operating System Efficiency R&D Consultant EfficiOS Inc.
> http://www.efficios.com
>
--
Mathieu Desnoyers
Operating System Efficiency R&D Consultant
EfficiOS Inc.
http://www.efficios.com
next prev parent reply other threads:[~2010-09-02 14:56 UTC|newest]
Thread overview: 8+ messages / expand[flat|nested] mbox.gz Atom feed top
2010-09-02 7:03 [ltt-dev] [PATCH 1/2] Add a data pointer to all tracepoint probe callbacks Nils Carlson
2010-09-02 7:03 ` [ltt-dev] [PATCH 2/2] Update test-case for tracepoints and add a new test-case Nils Carlson
2010-09-02 14:09 ` Mathieu Desnoyers
2010-09-02 14:50 ` Nils Carlson
2010-09-02 14:56 ` Mathieu Desnoyers [this message]
2010-09-02 9:08 ` [ltt-dev] [PATCH 1/2] Add a data pointer to all tracepoint probe callbacks Nils Carlson
2010-09-02 13:52 ` Mathieu Desnoyers
-- strict thread matches above, loose matches on Subject: below --
2010-08-31 13:53 [ltt-dev] [PATCH 2/2] Update test-case for tracepoints and add a new test-case Nils Carlson
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20100902145610.GA18925@Krystal \
--to=compudj@krystal.dyndns.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox