From: david.goulet@polymtl.ca (David Goulet)
Subject: [ltt-dev] [UST PATCH 1/3] Change code for consistency
Date: Fri, 17 Sep 2010 15:41:10 -0400 [thread overview]
Message-ID: <1284752472-350-1-git-send-email-david.goulet@polymtl.ca> (raw)
Use the kcompat stringify header for double level
stringification for markers section.
Also use the GET_MARKER macro for uniformity across the code.
Signed-off-by: David Goulet <david.goulet at polymtl.ca>
---
include/ust/marker.h | 33 +++++++++++++++------------------
1 files changed, 15 insertions(+), 18 deletions(-)
diff --git a/include/ust/marker.h b/include/ust/marker.h
index 2751f58..287f20f 100644
--- a/include/ust/marker.h
+++ b/include/ust/marker.h
@@ -30,15 +30,12 @@
#include <urcu/list.h>
#include <ust/processor.h>
#include <ust/kcompat/kcompat.h>
+#include <ust/kcompat/stringify.h>
#include <bits/wordsize.h>
struct marker;
-/* To stringify the expansion of a define */
-#define XSTR(d) STR(d)
-#define STR(s) #s
-
/**
* marker_probe_func - Type of a marker probe function
* @mdata: marker data
@@ -83,6 +80,8 @@ struct marker {
#define CONFIG_MARKERS
#ifdef CONFIG_MARKERS
+#define GET_MARKER(channel, name) (__mark_##channel##_##name)
+
#define _DEFINE_MARKER(channel, name, tp_name_str, tp_cb, format, unique, m) \
struct registers regs; \
\
@@ -96,14 +95,14 @@ struct marker {
* will try to create the same symbols, resulting in a conflict. This \
* is not unusual as it can be the result of function inlining. \
*/ \
- ".ifndef __mstrtab_" XSTR(channel) "_" XSTR(name) "_channel_" XSTR(unique) "\n\t" \
+ ".ifndef __mstrtab_" __stringify(channel) "_" __stringify(name) "_channel_" __stringify(unique) "\n\t" \
/*".section __markers_strings\n\t"*/ \
".section __markers_strings,\"aw\", at progbits\n\t" \
- "__mstrtab_" XSTR(channel) "_" XSTR(name) "_channel_" XSTR(unique) ":\n\t" \
- ".string \"" XSTR(channel) "\"\n\t" \
- "__mstrtab_" XSTR(channel) "_" XSTR(name) "_name_" XSTR(unique) ":\n\t" \
- ".string \"" XSTR(name) "\"\n\t" \
- "__mstrtab_" XSTR(channel) "_" XSTR(name) "_format_" XSTR(unique) ":\n\t" \
+ "__mstrtab_" __stringify(channel) "_" __stringify(name) "_channel_" __stringify(unique) ":\n\t" \
+ ".string \"" __stringify(channel) "\"\n\t" \
+ "__mstrtab_" __stringify(channel) "_" __stringify(name) "_name_" __stringify(unique) ":\n\t" \
+ ".string \"" __stringify(name) "\"\n\t" \
+ "__mstrtab_" __stringify(channel) "_" __stringify(name) "_format_" __stringify(unique) ":\n\t" \
".string " "\"" format "\"" "\n\t" \
".previous\n\t" \
".endif\n\t" \
@@ -113,14 +112,14 @@ struct marker {
".section __markers,\"aw\", at progbits\n\t" \
".balign 8\n\t" \
"2:\n\t" \
- _ASM_PTR "(__mstrtab_" XSTR(channel) "_" XSTR(name) "_channel_" XSTR(unique) ")\n\t" /* channel string */ \
- _ASM_PTR "(__mstrtab_" XSTR(channel) "_" XSTR(name) "_name_" XSTR(unique) ")\n\t" /* name string */ \
- _ASM_PTR "(__mstrtab_" XSTR(channel) "_" XSTR(name) "_format_" XSTR(unique) ")\n\t" /* format string */ \
+ _ASM_PTR "(__mstrtab_" __stringify(channel) "_" __stringify(name) "_channel_" __stringify(unique) ")\n\t" /* channel string */ \
+ _ASM_PTR "(__mstrtab_" __stringify(channel) "_" __stringify(name) "_name_" __stringify(unique) ")\n\t" /* name string */ \
+ _ASM_PTR "(__mstrtab_" __stringify(channel) "_" __stringify(name) "_format_" __stringify(unique) ")\n\t" /* format string */ \
".byte 0\n\t" /* state imv */ \
".byte 0\n\t" /* ptype */ \
".word 0\n\t" /* channel_id */ \
".word 0\n\t" /* event_id */ \
- ".balign " XSTR(__WORDSIZE) " / 8\n\t" /* alignment */ \
+ ".balign " __stringify(__WORDSIZE) " / 8\n\t" /* alignment */ \
_ASM_PTR "(marker_probe_cb)\n\t" /* call */ \
_ASM_PTR "(__mark_empty_function)\n\t" /* marker_probe_closure single.field1 */ \
_ASM_PTR "0\n\t" /* marker_probe_closure single.field2 */ \
@@ -146,7 +145,7 @@ struct marker {
static const char __mstrtab_##channel##_##name[] \
__attribute__((section("__markers_strings"))) \
= #channel "\0" #name "\0" format; \
- static struct marker __mark_##channel##_##name \
+ static struct marker GET_MARKER(channel, name) \
__attribute__((section("__markers"), aligned(8))) = \
{ __mstrtab_##channel##_##name, \
&__mstrtab_##channel##_##name[sizeof(#channel)], \
@@ -195,15 +194,13 @@ struct marker {
} \
DEFINE_MARKER_TP(channel, name, tp_name, tp_cb, format);\
__mark_check_format(format, ## args); \
- (*__mark_##channel##_##name.call)(&__mark_##channel##_##name, \
+ (*GET_MARKER(channel, name).call)(&GET_MARKER(channel, name), \
call_private, ®s, ## args); \
} while (0)
extern void marker_update_probe_range(struct marker *begin,
struct marker *end);
-#define GET_MARKER(channel, name) (__mark_##channel##_##name)
-
#else /* !CONFIG_MARKERS */
#define DEFINE_MARKER(channel, name, tp_name, tp_cb, format, m)
#define __trace_mark(generic, channel, name, call_private, format, args...) \
--
1.7.2.3
next reply other threads:[~2010-09-17 19:41 UTC|newest]
Thread overview: 12+ messages / expand[flat|nested] mbox.gz Atom feed top
2010-09-17 19:41 David Goulet [this message]
2010-09-17 19:41 ` [ltt-dev] [UST PATCH 2/3] Syntax cleanup David Goulet
2010-09-21 12:14 ` Nils Carlson
2010-09-17 19:41 ` [ltt-dev] [UST PATCH 3/3] Remove unused code David Goulet
2010-09-21 12:14 ` Nils Carlson
2010-09-26 5:13 ` Pierre-Marc Fournier
2010-09-26 16:37 ` David Goulet
2010-09-17 20:18 ` [ltt-dev] [UST PATCH 1/3] Change code for consistency Nils Carlson
2010-09-17 21:04 ` David Goulet
2010-09-17 21:07 ` Mathieu Desnoyers
2010-09-17 21:40 ` David Goulet
2010-09-21 12:13 ` Nils Carlson
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1284752472-350-1-git-send-email-david.goulet@polymtl.ca \
--to=david.goulet@polymtl.ca \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox