Re: SIGTRAP error

[Rohit Agarwal <rohitrules@gmail.com>]

hi
i got the source for gdb-6.3. applied the patch
"gdb-6.3-load-remote-target-bug.patch".
next i configured gdb by typing "./configure --prefix=/opt/arm-gdb
--target=arm-elf --host=i686-pc-linux-gnu" which completed without any
errors.
when i do a make, this is what i get..

Configuring in libiberty
configure: loading cache ./config.cache
configure: error: `target_alias' has changed since the previous run:
configure:   former value:  i686-pc-linux-gnu
configure:   current value: arm-elf
configure: error: changes in the environment can compromise the build
configure: error: run `make distclean' and/or `rm ./config.cache' and
start overmake: *** [configure-libiberty] Error 1

how can i fix this? make distclean and rm ./config.cache doesn't help.
on redoing make, i get the same error..

thanks
ROHIT

On 6/28/05, Rohit Agarwal <rohitrules@gmail.com> wrote:
> Thanks a lot for taking interest in my problem.
> 
> However, the patch u told me was for gdb-6.3 whereas i have gdb-5.3 on
> my computer.
> 
> Also, i tried looking for the latest version of arm-elf-gdb but the
> latest version which i could find was 5.3
> 
> Im still stuck where I was. Can anyone suggest something please
> 
> ROHIT
> 
> On 6/24/05, nora pan <qunyingpan@gmail.com> wrote:
> > Hello, Rohit:
> > 
> > You may want to try the patch for fixing PR 1944 at 
> > http://sources.redhat.com/cgi-bin/gnatsweb.pl. The patch is against
> > head gdb.
> > 
> > Gdb 5.3 may be too old. Most of the time people would try the latest
> > release to see if the fix is there.
> > 
> > Thanks,
> > 
> > Qunying
> > 
> > 
> > >[root@mahesh ecoswork]# arm-elf-gdb -nw
> > >install/tests/hal/common/current/tests/basic
> > >GNU gdb 5.3 (eCosCentric)
> > >Copyright 2002 Free Software Foundation, Inc.
> > >GDB is free software, covered by the GNU General Public >License, and
> you
> > are
> > >welcome to change it and/or distribute copies of it under >certain
> > conditions.
> > >Type "show copying" to see the conditions.
> > >There is absolutely no warranty for GDB.  Type "show >warranty" for
> > details.
> > >This GDB was configured as "--host=i686-pc-linux-gnu
> -->target=arm-elf"...
> > >(gdb) set endian big
> > >The target is assumed to be big endian
> > >(gdb) set remotebaud 115200
> > >(gdb) target remote /dev/ttyS0
> > >Remote debugging using /dev/ttyS0
> > >0x50012954 in ?? ()
> > >(gdb) load
> > >Loading section .rom_vectors, size 0x40 lma 0x80000
> > >Loading section .text, size 0x6c60 lma 0x80040
> > >Loading section .rodata, size 0x470 lma 0x86ca0
> > >Loading section .data, size 0x34c lma 0x87110
> > >Start address 0x80040, load size 29788
> > >Transfer rate: 79434 bits/sec, 300 bytes/write.
> > >(gdb) continue
> > >Continuing.
> >  
> > >Program received signal SIGTRAP, Trace/breakpoint trap.
> > >0x00080044 in warm_reset ()
> > >(gdb)
> > 
> > >i tried looking into the archives but couldnt find nythg tht wud >fit
> > here.
> > >plz reply soon.
> > >ROHIT AGARWAL
> > 
> 
> 
> -- 
> if u dont know it, it doesnt exist
> 


-- 
if u dont know it, it doesnt exist