Re: Remote debugging with gdbserver on ARM

["Pelle Svensson" <pelle2004@hotmail.com>]

>From: Daniel Jacobowitz <drow@false.org>
>To: Pelle Svensson <pelle2004@hotmail.com>
>CC: gdb@sourceware.org
>Subject: Re: Remote debugging with gdbserver on ARM
>Date: Thu, 15 Feb 2007 10:46:13 -0500
>
>On Wed, Feb 14, 2007 at 04:14:04PM +0100, Pelle Svensson wrote:
> > shared library path: (i386host)//home/dev/nfs/targetfs/lib, (target path 
>is
> > /lib)
>
> > issued set solib-absolute-prefix /dev/null
>
>Making your front end not do these, but instead set the prefix...

Things work much better with release 6.6 and not setting 
solib-absolute-prefix.

There is still a 'Cannot access memory at address 0x0' before reaching 
main().
Stepping works find in main().
Program runs much longer now, but stops at SIG32.

Console stuff:
=========
Cannot access memory at address 0x0
Cannot access memory at address 0x0
info program
Debugging a target over a serial line.
Program stopped at 0x40077228.
It stopped with signal SIG32, Real-time event 32.
Type "info stack" or "info registers" for more information.
info stack
#0  0x40077228 in ?? () from /lib/libpthread.so.0

After issued 'signal SIG32' for continuing things seems to be not right, can 
it be the
access at adress 0x0 or that the libpthread dosen't have any debug-info?

_________________________________________________________________
Senaste nytt om Paris och Lindsey http://starlounge.msn.se/