From: Hui Zhu <teawater@gmail.com>
To: Pedro Alves <palves@redhat.com>
Cc: Keith Seitz <keiths@redhat.com>, Hui Zhu <hui_zhu@mentor.com>,
gdb-patches ml <gdb-patches@sourceware.org>
Subject: Re: [PATCH] Fix dprintf work not right if it is pending
Date: Tue, 09 Apr 2013 15:28:00 -0000 [thread overview]
Message-ID: <CANFwon3rTwU1AkmeWAoHJZLH=DFrwMzbazK06M5UgBbSn7ZJ2A@mail.gmail.com> (raw)
In-Reply-To: <5162D6A9.2070706@redhat.com>
[-- Attachment #1: Type: text/plain, Size: 2323 bytes --]
Hi Pedro,
Thanks for your review.
On Mon, Apr 8, 2013 at 10:39 PM, Pedro Alves <palves@redhat.com> wrote:
> Hi Hui,
>
> Getting there.
>
> On 04/08/2013 08:19 AM, Hui Zhu wrote:
>> + /* 1 - connect to target 1, that can run breakpoint commands.
>> + 2 - create a dprintf, which resolves fine.
>> + 3 - disconnect from target 2
>
> This should have been "from target 1".
Fixed.
>
>> + 4 - connect to target 2, that can NOT run breakpoint commands.
>
>
>
>> +load_lib gdbserver-support.exp
>> +
>
> You're not calling gdbserver directly anymore, so this is no
> longer necessary.
Fixed.
>
>
>> +set testfile "dprintf-pending"
>> +set libfile "dprintf-pendshr"
>> +set srcfile $testfile.c
>> +set libsrc $srcdir/$subdir/$libfile.c
>> +set binfile $objdir/$subdir/$testfile
>> +set lib_sl $objdir/$subdir/$libfile.sl
>
> Please use standard_testfile/standard_output_file.
Fixed.
>
>
> Instead of these explicit "(without ...)":
>
>> + "set pending dprintf (without format)" \
> ...
>> + "set pending dprintf (without symbols)" \
> ...
>> +"single pending dprintf info (without symbols)"
> ...
>> +gdb_test "" ".*x=3.*x=4.*x=3.*" "run to resolved dprintf (without symbols)"
>
> Please use with_test_prefix, like
>
> with_test_prefix "without format" {
> ... group all "without format" bits here, including test setup ...
> }
>
> with_test_prefix "without symbols" {
> ... group all "without symbols" bits here ...
> }
>
Fixed.
>
>> +gdb_test "file ${binfile}" ".*Error in re-setting breakpoint.*" "load symbols get without format error"
>
> "load symbols get without format error" is not very correct English
> and I find it hard to grok. I suggest instead "resolved dprintf fails to
> be re-set". No need to mention "without format" here, as that will be
> covered by with_test_prefix.
>
Fixed.
> --
> Pedro Alves
>
Post a new version according to your comments.
Best,
Hui
2013-04-07 Pedro Alves <palves@redhat.com>
Hui Zhu <hui@codesourcery.com>
* breakpoint.c (dprintf_re_set): New.
(initialize_breakpoint_ops): Set dprintf_breakpoint_ops re_set
to dprintf_re_set.
2013-04-07 Hui Zhu <hui@codesourcery.com>
* gdb.base/Makefile.in (EXECUTABLES): Add dprintf-pending.
(MISCELLANEOUS): Add dprintf-pendshr.sl.
* gdb.base/dprintf-pending.c, gdb.base/dprintf-pending.exp: New.
[-- Attachment #2: dprintf-pending.txt --]
[-- Type: text/plain, Size: 1618 bytes --]
--- a/gdb/breakpoint.c
+++ b/gdb/breakpoint.c
@@ -12963,6 +12963,35 @@ bkpt_re_set (struct breakpoint *b)
breakpoint_re_set_default (b);
}
+/* Dprintf breakpoint_ops methods. */
+
+static void
+dprintf_re_set (struct breakpoint *b)
+{
+ breakpoint_re_set_default (b);
+
+ /* This breakpoint could have been pending, and be resolved now, and
+ if so, we should now have the extra string. If we don't, the
+ dprintf was malformed when created, but we couldn't tell because
+ we can't extract the extra string until the location is
+ resolved. */
+ if (b->loc != NULL && b->extra_string == NULL)
+ error (_("Format string required"));
+
+ /* 1 - connect to target 1, that can run breakpoint commands.
+ 2 - create a dprintf, which resolves fine.
+ 3 - disconnect from target 1
+ 4 - connect to target 2, that can NOT run breakpoint commands.
+
+ After steps #3/#4, you'll want the dprintf command list to
+ be updated, because target 1 and 2 may well return different
+ answers for target_can_run_breakpoint_commands().
+ Given absence of finer grained resetting, we get to do
+ it all the time. */
+ if (b->extra_string != NULL)
+ update_dprintf_command_list (b);
+}
+
static int
bkpt_insert_location (struct bp_location *bl)
{
@@ -16001,7 +16030,7 @@ initialize_breakpoint_ops (void)
ops = &dprintf_breakpoint_ops;
*ops = bkpt_base_breakpoint_ops;
- ops->re_set = bkpt_re_set;
+ ops->re_set = dprintf_re_set;
ops->resources_needed = bkpt_resources_needed;
ops->print_it = bkpt_print_it;
ops->print_mention = bkpt_print_mention;
[-- Attachment #3: dprintf-pending-test.txt --]
[-- Type: text/plain, Size: 5893 bytes --]
--- a/gdb/testsuite/gdb.base/Makefile.in
+++ b/gdb/testsuite/gdb.base/Makefile.in
@@ -10,7 +10,8 @@ EXECUTABLES = a2-run advance all-types a
call-strs callexit callfuncs callfwmall charset checkpoint \
chng-syms code_elim1 code_elim2 commands compiler complex \
condbreak consecutive constvars coremaker cursal cvexpr \
- dbx-test del disasm-end-cu display dump dup-sect dup-sect.debug \
+ dbx-test del disasm-end-cu display dprintf-pending dump dup-sect \
+ dup-sect.debug \
dup-sect.stripped ending-run execd-prog expand-psymtabs exprs \
fileio find finish fixsection float foll-exec foll-fork foll-vfork \
frame-args freebpcmd fullname funcargs gcore \
@@ -44,7 +45,7 @@ EXECUTABLES = a2-run advance all-types a
wchar whatis whatis-exp catch-syscall \
pr10179 gnu_vector
-MISCELLANEOUS = coremmap.data ../foobar.baz fixsectshr.sl \
+MISCELLANEOUS = coremmap.data dprintf-pendshr.sl ../foobar.baz fixsectshr.sl \
pendshr.sl shreloc1.sl shreloc2.sl twice-tmp.c \
shr1.sl shr2.sl solib_sl.sl solib1.sl solib2.sl \
unloadshr.sl unloadshr2.sl watchpoint-solib-shr.sl \
--- /dev/null
+++ b/gdb/testsuite/gdb.base/dprintf-pending.c
@@ -0,0 +1,29 @@
+/* This testcase is part of GDB, the GNU debugger.
+
+ Copyright 2013 Free Software Foundation, Inc.
+
+ This program is free software; you can redistribute it and/or modify
+ it under the terms of the GNU General Public License as published by
+ the Free Software Foundation; either version 3 of the License, or
+ (at your option) any later version.
+
+ This program is distributed in the hope that it will be useful,
+ but WITHOUT ANY WARRANTY; without even the implied warranty of
+ MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ GNU General Public License for more details.
+
+ You should have received a copy of the GNU General Public License
+ along with this program. If not, see <http://www.gnu.org/licenses/>. */
+
+int k = 0;
+
+extern void pendfunc (int x);
+
+int main()
+{
+ pendfunc (3); /* break main here */
+ pendfunc (4);
+ k = 1;
+ pendfunc (3);
+ return 0;
+}
--- /dev/null
+++ b/gdb/testsuite/gdb.base/dprintf-pending.exp
@@ -0,0 +1,100 @@
+# Copyright 2013 Free Software Foundation, Inc.
+
+# This program is free software; you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation; either version 3 of the License, or
+# (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program. If not, see <http://www.gnu.org/licenses/>.
+
+
+if {[skip_shlib_tests]} {
+ return 0
+}
+
+standard_testfile .c
+set libfile "dprintf-pendshr"
+set libsrc $srcdir/$subdir/$libfile.c
+set lib_sl $objdir/$subdir/$libfile.sl
+
+set lib_opts debug
+set exec_opts [list debug shlib=$lib_sl]
+
+if { [get_compiler_info] } {
+ return -1
+}
+
+if { [gdb_compile_shlib $libsrc $lib_sl $lib_opts] != ""
+ || [gdb_compile $srcdir/$subdir/$srcfile $binfile executable $exec_opts] != ""} {
+ untested "Could not compile either $libsrc or $srcdir/$subdir/$srcfile."
+ return -1
+}
+
+with_test_prefix "without format" {
+ gdb_exit
+ gdb_start
+ gdb_reinitialize_dir $srcdir/$subdir
+
+ gdb_test \
+ "dprintf pendfunc" \
+ "Dprintf.*pendfunc.*pending." \
+ "set pending dprintf" \
+ ".*Make dprintf pending.*y or \\\[n\\\]. $" \
+ "y"
+
+ gdb_test "file ${binfile}" ".*Error in re-setting breakpoint.*" "resolved dprintf fails to be re-set"
+}
+
+with_test_prefix "without symbols" {
+ gdb_exit
+ gdb_start
+ gdb_reinitialize_dir $srcdir/$subdir
+
+ gdb_test \
+ "dprintf pendfunc1, \"x=%d\\n\", x" \
+ "Dprintf.*pendfunc1.*pending." \
+ "set pending dprintf" \
+ ".*Make dprintf pending.*y or \\\[n\\\]. $" \
+ "y"
+
+ gdb_test "info break" \
+ "Num Type\[ \]+Disp Enb Address\[ \]+What.*
+\[0-9\]+\[\t \]+dprintf.*keep y.*PENDING.*pendfunc1.*" \
+ "single pending dprintf info"
+
+ gdb_load ${binfile}
+ gdb_load_shlibs $lib_sl
+
+ gdb_run_cmd
+
+ gdb_test "" ".*x=3.*x=4.*x=3.*" "run to resolved dprintf"
+}
+
+clean_restart ${binfile}
+gdb_load_shlibs $lib_sl
+
+#
+# Test setting, querying, and modifying pending breakpoints
+#
+
+gdb_test \
+ "dprintf pendfunc1, \"x=%d\\n\", x" \
+ "Dprintf.*pendfunc1.*pending." \
+ "set pending dprintf" \
+ ".*Make dprintf pending.*y or \\\[n\\\]. $" \
+ "y"
+
+gdb_test "info break" \
+ "Num Type\[ \]+Disp Enb Address\[ \]+What.*
+\[0-9\]+\[\t \]+dprintf.*keep y.*PENDING.*pendfunc1.*" \
+"single pending dprintf info"
+
+gdb_run_cmd
+
+gdb_test "" ".*x=3.*x=4.*x=3.*" "run to resolved dprintf"
--- /dev/null
+++ b/gdb/testsuite/gdb.base/dprintf-pendshr.c
@@ -0,0 +1,26 @@
+/* This testcase is part of GDB, the GNU debugger.
+
+ Copyright 2013 Free Software Foundation, Inc.
+
+ This program is free software; you can redistribute it and/or modify
+ it under the terms of the GNU General Public License as published by
+ the Free Software Foundation; either version 3 of the License, or
+ (at your option) any later version.
+
+ This program is distributed in the hope that it will be useful,
+ but WITHOUT ANY WARRANTY; without even the implied warranty of
+ MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ GNU General Public License for more details.
+
+ You should have received a copy of the GNU General Public License
+ along with this program. If not, see <http://www.gnu.org/licenses/>. */
+
+void pendfunc1 (int x)
+{
+ int y = x + 4;
+}
+
+void pendfunc (int x)
+{
+ pendfunc1 (x);
+}
next prev parent reply other threads:[~2013-04-09 9:01 UTC|newest]
Thread overview: 24+ messages / expand[flat|nested] mbox.gz Atom feed top
2013-03-22 7:39 Hui Zhu
2013-03-22 12:40 ` Yao Qi
2013-03-25 1:00 ` Keith Seitz
2013-03-25 2:14 ` Yao Qi
2013-03-26 14:55 ` Hui Zhu
2013-03-28 17:07 ` Keith Seitz
2013-03-29 15:50 ` Hui Zhu
2013-04-03 3:34 ` Keith Seitz
2013-04-04 18:42 ` Hui Zhu
2013-04-05 18:30 ` Pedro Alves
2013-04-08 7:20 ` Keith Seitz
2013-04-08 17:57 ` Pedro Alves
2013-04-08 9:34 ` Hui Zhu
2013-04-08 14:35 ` Hui Zhu
2013-04-08 18:34 ` Pedro Alves
2013-04-09 15:28 ` Hui Zhu [this message]
2013-04-09 15:28 ` Pedro Alves
2013-04-10 15:57 ` Hui Zhu
2013-04-10 16:12 ` Hui Zhu
2013-04-11 5:46 ` Joel Brobecker
2013-04-11 17:03 ` Pedro Alves
2013-04-12 12:21 ` Hui Zhu
2013-03-25 8:25 ` Hui Zhu
2013-03-25 8:28 ` Yao Qi
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to='CANFwon3rTwU1AkmeWAoHJZLH=DFrwMzbazK06M5UgBbSn7ZJ2A@mail.gmail.com' \
--to=teawater@gmail.com \
--cc=gdb-patches@sourceware.org \
--cc=hui_zhu@mentor.com \
--cc=keiths@redhat.com \
--cc=palves@redhat.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox