From: Alan Hayward <Alan.Hayward@arm.com>
To: Yao Qi <qiyaoltc@gmail.com>
Cc: "gdb-patches@sourceware.org" <gdb-patches@sourceware.org>,
nd <nd@arm.com>
Subject: Re: [PATCH] Simplify regcache_cpy and remove regcache::cpy_no_passthrough
Date: Tue, 18 Jul 2017 09:01:00 -0000 [thread overview]
Message-ID: <BA2B66F5-BC4A-44C9-9D83-1D0CA07A4377@arm.com> (raw)
In-Reply-To: <86k237s3hl.fsf@gmail.com>
> On 17 Jul 2017, at 12:32, Yao Qi <qiyaoltc@gmail.com> wrote:
>
> Alan Hayward <Alan.Hayward@arm.com> writes:
>
>> If not, then there should be a comment above regcache_cpy stating the
>> restrictions.
>
> I updated the comments to regcache_dup and regcache_cpy.
Ok for me.
>
> --
> Yao (齐尧)
> From 4ff91e90cad73f9420f8ca37fc7e22f465ebcb88 Mon Sep 17 00:00:00 2001
> From: Yao Qi <yao.qi@linaro.org>
> Date: Mon, 19 Jun 2017 22:45:12 +0100
> Subject: [PATCH] Simplify regcache_cpy and remove regcache::cpy_no_passthrough
>
> Nowadays, regcache_cpy is used where src is read-only and dst is not
> read-only, so the regcache_cpy can be simplified to handle this case only.
> As a result, regcache::cpy_no_passthrough, which is about two read-only
> regcache copy, is no longer used, remove it as well.
>
> gdb:
>
> 2017-07-17 Yao Qi <yao.qi@linaro.org>
>
> * regcache.c (regcache_cpy): Simplify it.
> (regcache::cpy_no_passthrough): Remove it.
> * regcache.h (cpy_no_passthrough): Remove it.
> (regcache_dup, regcache_cpy): Update comments.
>
> diff --git a/gdb/regcache.c b/gdb/regcache.c
> index 7eeb737..e8f92d6 100644
> --- a/gdb/regcache.c
> +++ b/gdb/regcache.c
> @@ -388,36 +388,9 @@ regcache_cpy (struct regcache *dst, struct regcache *src)
> gdb_assert (src != NULL && dst != NULL);
> gdb_assert (src->m_descr->gdbarch == dst->m_descr->gdbarch);
> gdb_assert (src != dst);
> - gdb_assert (src->m_readonly_p || dst->m_readonly_p);
> + gdb_assert (src->m_readonly_p && !dst->m_readonly_p);
>
> - if (!src->m_readonly_p)
> - regcache_save (dst, do_cooked_read, src);
> - else if (!dst->m_readonly_p)
> - dst->restore (src);
> - else
> - dst->cpy_no_passthrough (src);
> -}
> -
> -/* Copy/duplicate the contents of a register cache. Unlike regcache_cpy,
> - which is pass-through, this does not go through to the target.
> - Only values values already in the cache are transferred. The SRC and DST
> - buffers must not overlap. */
> -
> -void
> -regcache::cpy_no_passthrough (struct regcache *src)
> -{
> - gdb_assert (src != NULL);
> - gdb_assert (src->m_descr->gdbarch == m_descr->gdbarch);
> - /* NOTE: cagney/2002-05-17: Don't let the caller do a no-passthrough
> - move of data into a thread's regcache. Doing this would be silly
> - - it would mean that regcache->register_status would be
> - completely invalid. */
> - gdb_assert (m_readonly_p && src->m_readonly_p);
> -
> - memcpy (m_registers, src->m_registers,
> - m_descr->sizeof_cooked_registers);
> - memcpy (m_register_status, src->m_register_status,
> - m_descr->sizeof_cooked_register_status);
> + dst->restore (src);
> }
>
> struct regcache *
> diff --git a/gdb/regcache.h b/gdb/regcache.h
> index b416d5e..aa64a00 100644
> --- a/gdb/regcache.h
> +++ b/gdb/regcache.h
> @@ -369,8 +369,6 @@ private:
>
> void restore (struct regcache *src);
>
> - void cpy_no_passthrough (struct regcache *src);
> -
> enum register_status xfer_part (int regnum, int offset, int len, void *in,
> const void *out,
> decltype (regcache_raw_read) read,
> @@ -415,13 +413,12 @@ private:
> regcache_cpy (struct regcache *dst, struct regcache *src);
> };
>
> -/* Copy/duplicate the contents of a register cache. By default, the
> - operation is pass-through. Writes to DST and reads from SRC will
> - go through to the target. See also regcache_cpy_no_passthrough.
> -
> - regcache_cpy can not have overlapping SRC and DST buffers. */
> -
> +/* Duplicate the contents of a register cache to a read-only register
> + cache. The operation is pass-through. */
> extern struct regcache *regcache_dup (struct regcache *regcache);
> +
> +/* Writes to DEST will go through to the target. SRC is a read-only
> + register cache. */
> extern void regcache_cpy (struct regcache *dest, struct regcache *src);
>
> extern void registers_changed (void);
next prev parent reply other threads:[~2017-07-18 9:01 UTC|newest]
Thread overview: 5+ messages / expand[flat|nested] mbox.gz Atom feed top
2017-06-27 7:37 Yao Qi
2017-07-17 9:04 ` Alan Hayward
2017-07-17 11:32 ` Yao Qi
2017-07-18 9:01 ` Alan Hayward [this message]
2017-07-18 11:49 ` Yao Qi
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=BA2B66F5-BC4A-44C9-9D83-1D0CA07A4377@arm.com \
--to=alan.hayward@arm.com \
--cc=gdb-patches@sourceware.org \
--cc=nd@arm.com \
--cc=qiyaoltc@gmail.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox