Index: maint.c
===================================================================
RCS file: /cvs/src/src/gdb/maint.c,v
retrieving revision 1.68
diff -u -p -u -r1.68 maint.c
--- maint.c	30 Oct 2008 20:35:30 -0000	1.68
+++ maint.c	17 Nov 2008 23:09:50 -0000
@@ -35,6 +35,7 @@
 #include "symfile.h"
 #include "objfiles.h"
 #include "value.h"
+#include "gdb_assert.h"
 
 #include "cli/cli-decode.h"
 
@@ -484,9 +485,32 @@ maintenance_translate_address (char *arg
     sym = lookup_minimal_symbol_by_pc (address);
 
   if (sym)
-    printf_filtered ("%s+%s\n",
-		     SYMBOL_PRINT_NAME (sym),
-		     pulongest (address - SYMBOL_VALUE_ADDRESS (sym)));
+    {
+      const char *symbol_name = SYMBOL_PRINT_NAME (sym);
+      const char *symbol_offset = pulongest (address - SYMBOL_VALUE_ADDRESS (sym));
+
+      sect = SYMBOL_OBJ_SECTION(sym);
+      if (sect != NULL)
+	{
+	  const char *section_name;
+	  const char *obj_name;
+
+	  gdb_assert (sect->the_bfd_section && sect->the_bfd_section->name);
+	  section_name = sect->the_bfd_section->name;
+
+	  gdb_assert (sect->objfile && sect->objfile->name);
+	  obj_name = sect->objfile->name;
+
+	  if (MULTI_OBJFILE_P ())
+	    printf_filtered (_("%s + %s in section %s of %s\n"),
+			     symbol_name, symbol_offset, section_name, obj_name);
+	  else
+	    printf_filtered (_("%s + %s in section %s\n"),
+			     symbol_name, symbol_offset, section_name);
+	}
+      else
+	printf_filtered (_("%s + %s\n"), symbol_name, symbol_offset);
+    }
   else if (sect)
     printf_filtered (_("no symbol at %s:0x%s\n"),
 		     sect->the_bfd_section->name, paddr (address));
Index: objfiles.h
===================================================================
RCS file: /cvs/src/src/gdb/objfiles.h,v
retrieving revision 1.56
diff -u -p -u -r1.56 objfiles.h
--- objfiles.h	1 Oct 2008 17:21:06 -0000	1.56
+++ objfiles.h	17 Nov 2008 23:09:50 -0000
@@ -583,4 +583,8 @@ extern void *objfile_data (struct objfil
    uninitialized section index. */
 #define SECT_OFF_BSS(objfile) (objfile)->sect_index_bss
 
+/* Answer whether there is more than one object file loaded.  */
+
+#define MULTI_OBJFILE_P() (object_files && object_files->next)
+
 #endif /* !defined (OBJFILES_H) */
Index: printcmd.c
===================================================================
RCS file: /cvs/src/src/gdb/printcmd.c,v
retrieving revision 1.136
diff -u -p -u -r1.136 printcmd.c
--- printcmd.c	13 Nov 2008 22:26:15 -0000	1.136
+++ printcmd.c	17 Nov 2008 23:09:50 -0000
@@ -1012,21 +1012,51 @@ sym_info (char *arg, int from_tty)
 	&& sect_addr < obj_section_endaddr (osect)
 	&& (msymbol = lookup_minimal_symbol_by_pc_section (sect_addr, osect)))
       {
+	const char *obj_name, *mapped, *sec_name, *msym_name;
+
 	matches = 1;
 	offset = sect_addr - SYMBOL_VALUE_ADDRESS (msymbol);
-	if (offset)
-	  printf_filtered ("%s + %u in ",
-			   SYMBOL_PRINT_NAME (msymbol), offset);
+	mapped = section_is_mapped (osect) ? "mapped" : "unmapped";
+	sec_name = osect->the_bfd_section->name;
+	msym_name = SYMBOL_PRINT_NAME (msymbol);
+
+	gdb_assert (osect->objfile && osect->objfile->name);
+	obj_name = osect->objfile->name;
+
+	if (MULTI_OBJFILE_P ())
+	  if (pc_in_unmapped_range (addr, osect))
+	    if (section_is_overlay (osect))
+	      printf_filtered (_("%s + %u in load address range of "
+				 "%s overlay section %s of %s\n"),
+			       msym_name, offset,
+			       mapped, sec_name, obj_name);
+	    else
+	      printf_filtered (_("%s + %u in load address range of "
+				 "section %s of %s\n"),
+			       msym_name, offset, sec_name, obj_name);
+	  else
+	    if (section_is_overlay (osect))
+	      printf_filtered (_("%s + %u in %s overlay section %s of %s\n"),
+			       msym_name, offset, mapped, sec_name, obj_name);
+	    else
+	      printf_filtered (_("%s + %u in section %s of %s\n"),
+			       msym_name, offset, sec_name, obj_name);
 	else
-	  printf_filtered ("%s in ",
-			   SYMBOL_PRINT_NAME (msymbol));
-	if (pc_in_unmapped_range (addr, osect))
-	  printf_filtered (_("load address range of "));
-	if (section_is_overlay (osect))
-	  printf_filtered (_("%s overlay "),
-			   section_is_mapped (osect) ? "mapped" : "unmapped");
-	printf_filtered (_("section %s"), osect->the_bfd_section->name);
-	printf_filtered ("\n");
+	  if (pc_in_unmapped_range (addr, osect))
+	    if (section_is_overlay (osect))
+	      printf_filtered (_("%s + %u in load address range of %s overlay "
+				 "section %s\n"),
+			       msym_name, offset, mapped, sec_name);
+	    else
+	      printf_filtered (_("%s + %u in load address range of section %s\n"),
+			       msym_name, offset, sec_name);
+	  else
+	    if (section_is_overlay (osect))
+	      printf_filtered (_("%s + %u in %s overlay section %s\n"),
+			       msym_name, offset, mapped, sec_name);
+	    else
+	      printf_filtered (_("%s + %u in section %s\n"),
+			       msym_name, offset, sec_name);
       }
   }
   if (matches == 0)
Index: doc/gdb.texinfo
===================================================================
RCS file: /cvs/src/src/gdb/doc/gdb.texinfo,v
retrieving revision 1.533
diff -u -p -u -r1.533 gdb.texinfo
--- doc/gdb.texinfo	17 Nov 2008 16:43:33 -0000	1.533
+++ doc/gdb.texinfo	17 Nov 2008 23:09:51 -0000
@@ -11866,6 +11866,16 @@ _initialize_vx + 396 in section .text
 This is the opposite of the @code{info address} command.  You can use
 it to find out the name of a variable or a function given its address.
 
+For dynamically linked executables, the name of executable or shared
+library containing the symbol is also printed:
+
+@smallexample
+(@value{GDBP}) info symbol 0x400225
+_start + 5 in section .text of /tmp/a.out
+(@value{GDBP}) info symbol 0x2aaaac2811cf
+__read_nocancel + 6 in section .text of /usr/lib64/libc.so.6
+@end smallexample
+
 @kindex whatis
 @item whatis [@var{arg}]
 Print the data type of @var{arg}, which can be either an expression or
@@ -24621,6 +24631,10 @@ the symbol's location to the specified a
 the @code{info address} command (@pxref{Symbols}), except that this
 command also allows to find symbols in other sections.
 
+If section was not specified, the section in which the symbol was found
+is also printed.  For dynamically linked executables, the name of
+executable or shared library containing the symbol is printed as well.
+
 @end table
 
 The following command is useful for non-interactive invocations of
Index: testsuite/gdb.base/sepsymtab.exp
===================================================================
RCS file: /cvs/src/src/gdb/testsuite/gdb.base/sepsymtab.exp,v
retrieving revision 1.5
diff -u -p -u -r1.5 sepsymtab.exp
--- testsuite/gdb.base/sepsymtab.exp	1 Jan 2008 22:53:19 -0000	1.5
+++ testsuite/gdb.base/sepsymtab.exp	17 Nov 2008 23:33:07 -0000
@@ -45,7 +45,7 @@ gdb_load ${binfile}
 set command "info sym main"
 set command_regex [string_to_regexp $command]
 gdb_test_multiple "$command" "$command" {
-    -re "^${command_regex}\[\r\n\]+main in section \[^\r\n\]+\[\r\n\]+$gdb_prompt \$" {
+    -re "^${command_regex}\[\r\n\]+main \\+ 0 in section \[^\r\n\]+\[\r\n\]+$gdb_prompt \$" {
 	pass "$command"
     }
 }